The PDP Marvel Xbox 360 controller with USB ID 0e6f:0147 is
incorrectly classified as an Xbox One controller.
With the current XTYPE_XBOXONE classification, the controller is
detected but produces no input, while its four player LEDs continue
blinking indefinitely.
Classify USB ID 0e6f:0147 as an Xbox 360 controller instead.
Tested on a PDP Marvel Xbox 360 controller with USB ID 0e6f:0147.
All inputs register correctly and the player LED indicates the
current player.
Fixes: c225370e01 ("Input: xpad - sync supported devices with 360Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Nyberg <SlickStretch3.0@gmail.com>
Link: https://patch.msgid.link/20260910071627.236014-1-SlickStretch3.0@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a comment to input-event-codes.h clarifying that no new LED
definitions should be added to the input subsystem. The existing
LED_* definitions are legacy and grandfathered for backwards
compatibility with userspace via evdev. Any new LED indicators
should instead use the dedicated LED subsystem.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On the MS Surface Pro 11 soc_button_array probing races with the GPIO
driver probing. If soc_button_array wins the race then gpiod_get() returns
EPROBE_DEFER, which should normally take care of retrying later, but
the soc_button_array code deliberately ignores EPROBE_DEFER causing it
to fail its probe() which causes the volume and power buttons to now work.
The ignoring of EPROBE_DEFER is there to deal with a problem specific to
older Bay Trail (BYT) and Cherry Trail (CHT) tablets which often use this
driver. Modify the error handling to only ignore EPROBE_DEFER on BYT and
CHT platforms and propagate EPROBE_DEFER normally on other platforms.
Fixes: bcf0595789 ("Input: soc_button_array - partial revert of support for newer surface devices")
Cc: stable@vger.kernel.org
Reported-by: Sergey Lebedev <lsa.uz@pm.me>
Closes: https://lore.kernel.org/lkml/20260830141355.55898-1-lsa.uz@pm.me/
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Tested-by: Sergey Lebedev <lsa.uz@pm.me>
Link: https://patch.msgid.link/20260909093934.29411-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On the Acer Aspire Go 15 (AG15-42P), the internal keyboard drops out
~5 seconds after boot on both Linux and Linux-LTS kernels. Keystrokes on
the built-in keyboard stop registering while the trackpad and external
keyboards remain functional.
Testing confirms that booting with the i8042.reset kernel parameter
resolves the issue and keeps the internal keyboard responsive.
Add SERIO_QUIRK_RESET_ALWAYS to i8042_dmi_quirk_table for the Acer
Aspire AG15-42P to automatically apply this quirk on boot.
Signed-off-by: Chris Sommers <chris.sommers@icloud.com>
Link: https://patch.msgid.link/20260907182723.2709981-1-chris.sommers@icloud.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Lenovo ThinkPad T440p (PNP ID LEN0036, board id 2722) has a
Synaptics touchpad whose SMBus companion is not ready at boot and
takes roughly 200 seconds to appear. During this window the touchpad
and TrackPoint are completely unresponsive on approximately 50% of
boots, making the machine unusable until the companion finally
registers.
The device is in the topbuttonpad_pnp_ids[] SMBus allowlist, so the
kernel attempts to use SMBus/RMI4 mode by default. When the companion
is not ready, psmouse_smbus_init() leaves breadcrumbs and returns
-EAGAIN, the PS/2 fallback path is taken, but the device does not
function properly until the companion appears and RMI4 takes over.
Disable SMBus InterTouch for board id 2722 so the touchpad and
TrackPoint work immediately via PS/2 from boot. Users can still force
SMBus with psmouse.synaptics_intertouch=1 if needed.
Tested-by: Raphaël Larocque <rlarocque@disroot.org>
Signed-off-by: Raphaël Larocque <rlarocque@disroot.org>
Link: https://patch.msgid.link/20260910164425.12832-1-rlarocque@disroot.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the compat path input_ff_effect_from_user() aliases the caller's
native struct ff_effect with the smaller struct ff_effect_compat and
copies only the compat sized prefix:
compat_effect = (struct ff_effect_compat *)effect;
if (copy_from_user(compat_effect, buffer,
sizeof(struct ff_effect_compat)))
The tail of the native structure is never written. Callers pass an
uninitialized on-stack object, for example evdev_do_ioctl() for
EVIOCSFF, so those bytes keep their previous stack contents.
input_ff_upload() then stores the full native structure in
ff->effects[id], from where a uinput based force feedback daemon can
read it back via UI_BEGIN_FF_UPLOAD, disclosing kernel stack memory to
userspace.
Zero the effect before the compat copy.
Fixes: 2d56f3a32c ("Input: refactor evdev 32bit compat to be shareable with uinput")
Cc: stable@vger.kernel.org
Signed-off-by: Iván Ezequiel Rodriguez <ivanrwcm25@gmail.com>
Link: https://patch.msgid.link/20260901130629.24078-3-ivanrwcm25@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The EVIOCSABS handler copies at most the user supplied ioctl size into
an uninitialized on-stack struct input_absinfo:
if (copy_from_user(&abs, p, min_t(size_t,
size, sizeof(struct input_absinfo))))
The size comes from _IOC_SIZE() of the ioctl command and is therefore
fully controlled by userspace. A short size leaves the trailing part of
the structure holding whatever was on the kernel stack, and the whole
structure is then stored into the device:
dev->absinfo[t] = abs;
EVIOCGABS hands that back to userspace, disclosing the stale stack
bytes. Only the resolution field is currently cleared, which covers the
legacy struct layout but not an arbitrarily short size.
Zero the structure before the copy so any part not supplied by the
caller reads back as zero. The existing resolution fixup is kept, since
it also handles a size that partially overlaps that field.
Fixes: 448cd1664a ("Input: evdev - rearrange ioctl handling")
Cc: stable@vger.kernel.org
Signed-off-by: Iván Ezequiel Rodriguez <ivanrwcm25@gmail.com>
Link: https://patch.msgid.link/20260901130629.24078-2-ivanrwcm25@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Transport drivers (such as rmi_i2c and rmi_spi) invoke
rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev
device during system power management events. However, transport drivers
are fully registered and operational even if the physical RMI driver
failed to bind or probe the rmi_dev device.
When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound
rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or
rmi_enable_irq() without driver data attached causes a NULL pointer
dereference and General Protection Fault when attempting to lock
data->enabled_mutex.
Fix this by checking if driver data is attached to rmi_dev in
rmi_driver_suspend() and rmi_driver_resume(), exiting early if
no driver data is present.
Fixes: 2b6a321da9 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices")
Reported-by: syzbot+09103639e39c989e3ed3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=09103639e39c989e3ed3
Cc: stable@vger.kernel.org
Assisted-by: LLM
Link: https://patch.msgid.link/anQe8UiyUR4x0flD@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When chunking writes into SMBus blocks in rmi_smb_write_block(), the
loop calculates block_len using the original total length (len) instead
of the remaining length (cur_len).
If len is greater than 32 bytes (SMB_MAX_COUNT), block_len remains 32
for every iteration, even on the final partial chunk where fewer than 32
bytes remain. This causes smb_block_write() to read 32 bytes from the
advanced data buffer pointer, reading past the end of the input buffer.
Fix this by calculating block_len using cur_len and advancing the buffer
and address pointers by block_len.
Fixes: 82264d0cf7 ("Input: synaptics-rmi4 - add SMBus support")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: LLM
Link: https://patch.msgid.link/anLFSMKSoKyyZ272@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The internal keyboard of the Xiaomi Redmi Book Pro 16 2026 (board TM2425)
does not work: atkbd_probe() succeeds and every command is ACKed, but no
scancodes ever arrive afterwards.
Testing on the hardware through serio_raw shows that ATKBD_CMD_RESET_DIS
(0xF5) is the culprit. After 0xF5 the embedded controller keeps ACKing
commands but stops delivering scancodes, and neither ATKBD_CMD_ENABLE
(0xF4) nor ATKBD_CMD_RESET_BAT (0xFF) bring them back. Only re-enabling
the keyboard interface at the controller level (i8042 command 0xAE, or
rewriting the command byte as i8042_port_close() does) revives it.
Running the init sequence without 0xF5 (0xED 0x00, 0xF3 0x00, 0xF4)
keeps the keyboard working.
'i8042.dumbkbd=1' also works around this, but then the driver never
writes to the keyboard and the LEDs cannot be controlled. Use the
existing atkbd_deactivate_fixup quirk instead, as done for the sibling
TM2424 by commit 3a046db33b ("Input: atkbd - skip deactivate for
Xiaomi Book Pro 14's internal keyboard"). Tested on v7.2: keyboard,
Caps Lock LED and s2idle suspend/resume all work.
DMI: XIAOMI REDMI Book Pro 16 2026/TM2425, BIOS RMAPT6B0P0909 05/22/2026
Fixes: 9cf6e24c9f ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Cc: stable@vger.kernel.org
Signed-off-by: Alexei Turtanov <9alexei9@gmail.com>
Link: https://patch.msgid.link/20260828112239.18081-1-9alexei9@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a compatible string for the mt6572 keypad, that is compatible with
mt6779.
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260814-6572-dt-keypad-v1-1-2ceff2373211@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
So as not to clobber any pre-programmed GPIO state in the execution
of its gpiochip ops, the driver caches things during probe time.
However, since those ops can be called both during and immediately after
the call to devm_gpiochip_add_data(), it is imperative that things are
cached before that. That's not the case right now, so reorder the two
steps to prevent any clobbering.
In the concrete example which motivated this change, a bootloader was
preconfiguring an important GPIO output to HIGH before booting the
kernel. Linux would then inadvertently set that output to LOW while
configuring a GPIO hog on a discrete GPIO line within the same 8-bit
bank (because the cached value was 0=LOW).
Fixes: ba9f507a1b ("Input: adp5588-keys - export unused GPIO pins")
Signed-off-by: Alvin Šipraga <alvin.sipraga@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260818-adp5588-gpio-cache-v1-1-650a2674fc0d@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In sur40_probe(), if video_register_device() fails, the error path jumps to
err_unreg_video. This incorrectly attempts to unregister a video device
that was never successfully registered, and fails to free the V4L2 control
handler (v4l2_ctrl_handler_free) that was initialized immediately prior.
Fix this by introducing an err_free_ctrl label to properly free the V4L2
control handler and bypass video_unregister_device() when video device
registration fails.
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260616051235.1549517-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In sur40_probe(), input_register_device() was previously called early before
the V4L2 video device and vb2_queue components were fully initialized. If
userspace opened the input device immediately upon registration, sur40_open()
would trigger and start the sur40_poll() worker thread. This worker thread
invokes sur40_process_video() and accesses the uninitialized vb2_queue
structure, leading to a data race and potential system crash.
Furthermore, if V4L2 or video registration failed after input_register_device()
succeeded, the error path fell through to calling input_free_device() on a
successfully registered device instead of input_unregister_device(), corrupting
input core state.
Move input_register_device() to the very end of sur40_probe(). This ensures
the V4L2 and video queue structures are fully initialized before polling can
start, and naturally resolves the error path bug since input_free_device()
is now only called when input registration has not yet occurred.
To maintain strict LIFO (Last-In, First-Out) teardown ordering, also move
input_unregister_device() to the very beginning of sur40_disconnect(). This
guarantees that the input polling worker thread is stopped before V4L2
video components or control handlers are unregistered.
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260616051235.1549517-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sort the include statements before adding new ones in the next change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260811122011.3539250-3-wenst@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
elan-i2c-ids.h only needs struct acpi_device_id from the ACPI
device ID definitions. The MODULE_DEVICE_TABLE() user already includes
<linux/module.h>.
Include <linux/device-id/acpi.h> instead of the broader
<linux/mod_devicetable.h> header.
Assisted-by: Codex:GPT-5
Signed-off-by: Longlong Xia <xialonglong@kylinos.cn>
Link: https://patch.msgid.link/20260809142928.4031270-1-xialonglong2025@163.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK
ioctls is used to index the static counts array in evdev_get_mask_cnt()
and client evmasks array in evdev_get_mask().
While the event type is architecturally bounded by EV_CNT, speculative
execution may mispredict bounds checks and perform out-of-bounds loads.
Sanitize the event type index in evdev_get_mask_cnt() branchlessly using
array_index_mask_nospec(). This clamps the index to 0 for safe array
access and forces the returned count to 0 speculatively when the index
is out of bounds.
We do not need additional array_index_nospec() calls in evdev_get_mask()
because evdev_get_mask_cnt() speculatively forces the count (and
resulting xfer_size) to 0 for out-of-bounds types, preventing any
speculative memory access to client evmasks array.
Reported-by: "Wagenaar, C.C.J. (Chris)" <c.c.j.wagenaar@vu.nl>
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.6-flash
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/anFCAfvxwXB5eJF1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When an input device is being unregistered via input_unregister_device(),
input_disconnect_device() sets dev->going_away = true under dev->mutex
and releases the mutex.
If a concurrent sysfs write to the inhibited attribute executes
input_inhibit_device() or input_uninhibit_device(), it acquires
dev->mutex. Because neither function checks dev->going_away (unlike
input_open_device()), input_uninhibit_device() proceeds to call
dev->open() and start polling on a device that is in the middle of being
unregistered and torn down.
Fix this by checking dev->going_away in input_inhibit_device() and
input_uninhibit_device() under dev->mutex and returning -ENODEV if the
device is going away.
Fixes: a181616487 ("Input: Add "inhibited" property")
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.6-flash
Link: https://patch.msgid.link/anEolqA35rGei9ql@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When registering an input handle, handler->start() is currently called
immediately. However, the input device might not be fully opened or
ready to process events at this stage, meaning any state synchronization
events (like setting LED states) injected by the handler's start method
might be dropped.
Move the handler->start() invocation to input_open_device(). If it is
the first handle opening the device, start() is called after the driver's
open() method has successfully completed and the device is fully prepared.
To facilitate this, factor out the device startup logic (calling driver's
open and starting polling) into input_start_device().
For passive observer handlers, their start() method is also deferred
until the handle is opened. Since opening a passive observer handle does
not start the underlying hardware device, their start() method is called
immediately upon opening, regardless of whether the device is active.
Fixes: c7e8dc6ee6 ("Input: add start() method to input handlers")
Link: https://patch.msgid.link/20260803005210.1251102-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When an input device is inhibited via input_inhibit_device(), the driver
is closed and physical feedback (like LEDs and sounds) is toggled off.
However, from the input core's perspective, the handles remain open.
When the device is later uninhibited, the driver is re-opened. While the
core restores simple LED states via input_dev_toggle(), complex handlers
(such as vt/keyboard) may need to re-synchronize their broader logical
state with the hardware.
Fixes: a181616487 ("Input: Add "inhibited" property")
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260803005210.1251102-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When uninhibiting a device, we previously called dev->open() and started
the poller before clearing dev->inhibited. Since drivers (like
gpio_keys) often report initial state during open(), and pollers report
events immediately upon starting, these initial events were dropped by
input_get_disposition() because dev->inhibited was still true.
Fix this by clearing dev->inhibited before calling dev->open(), ensuring
initial events are delivered to handlers, and restoring dev->inhibited =
true if dev->open() fails.
Fixes: a181616487 ("Input: Add "inhibited" property")
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260803005210.1251102-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a device is opened via input_open_device(), the driver's open()
callback is invoked. Some drivers, like cm109, submit URBs or perform
other hardware initialization in their open() callbacks.
However, the input core does not prevent dev->event() from being called
concurrently during the driver's open() execution. For instance, if a
console beep occurs, the kbd handler might inject an EV_SND event. This
can lead to double list_add BUGs if the driver submits the same URB in
both open() and event() paths without adequate synchronization.
To fix this, introduce a ready flag in the input_dev structure.
For complex devices (where dev->open is defined), this flag is set to true
only after the driver's open() method successfully completes. The core now
checks ready in input_event_dispose() and input_dev_toggle()
to prevent events from reaching the hardware before it is fully prepared.
For simple devices (no open callback), events are delivered immediately.
We also replay the logical state in input_open_device() by calling
input_dev_toggle() right after marking the device ready, ensuring no
events are permanently lost.
In the inhibit path, we ensure that physical feedback (LEDs/sounds) is
turned off before the device is closed, and we synchronize the inhibited
state transition under the event lock to prevent races with incoming events.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260803005210.1251102-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of hardcoding PA-RISC specific keycode tables into atkbd via
compile-time inclusion, have the gscps2 PS/2 port driver attach a
linux,keymap software node device property to the serio device when
a keyboard port is registered. This allows atkbd to dynamically fetch
and apply the custom keymap when probing the port using generic
firmware property helpers, removing architecture-specific hacks from
generic keyboard driver code.
Co-locate the keymap definitions with the serio port driver by moving
hpps2atkbd.h from drivers/input/keyboard/ to drivers/input/serio/.
To handle the five conflicting keys on RDI PrecisionBook laptops without
runtime model string checks or duplicate keymap tables in memory, add
CONFIG_SERIO_GSCPS2_RDI_KEYCODES to drivers/input/serio/Kconfig and
resolve the conflicting keycodes at compile time via preprocessor
macros.
Link: https://patch.msgid.link/am_9BvmZu9g4RlUM@google.com
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Previously, rmi_f54_buffer_queue() waited for the worker thread to
finish but ignored whether it succeeded. If the worker failed (e.g.,
due to a timeout or register read failure), the queue thread would
silently return success, delivering stale or uninitialized memory to
userspace.
Add a 'report_error' field to struct f54_data to store the worker's exit
status. Check this field in rmi_f54_buffer_queue() after the worker
finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error
occurred.
Fixes: 3a762dbd53 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
error is always zero at the last return in synaptics_i2c_reg_set().
Explicitly return 0 on the success path instead of returning error,
which is the preferred way when there are multiple failure points.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260729171001.260698-4-ekffu200098@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Both branches of the check return the same value, so the check has no
effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260729171001.260698-3-ekffu200098@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Both branches of the check return the same value, so the check has no
effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260729171001.260698-2-ekffu200098@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Changing the input (diagnostic report type) mid-stream changes the
report size. Since V4L2 buffers are allocated based on the size at
stream start, changing the input while streaming could lead to a
heap buffer overflow if the new size is larger than the allocated
buffers.
Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue
is busy (streaming).
Fixes: 3a762dbd53 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/20260626051802.4033172-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check.
Fixes: c762cc68b6 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first.
Fixes: 3a762dbd53 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
During F55 sensor detection, the transmitter (TX) electrode count was
incorrectly assigned the value of the receiver (RX) electrode count
due to copy-paste typos.
This incorrect value was then propagated to the driver data and used
by F54 to determine the diagnostics report size. On devices with more
RX than TX electrodes, this inflated the perceived TX count, leading
to incorrect report size calculations and potential out-of-bounds
buffer accesses.
Fix the typos by correctly assigning the TX electrode counts.
Fixes: 6adba43fd2 ("Input: synaptics-rmi4 - add support for F55 sensor tuning")
Fixes: c762cc68b6 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54")
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
focaltech_finger_state stores finger coordinates x and y as unsigned
int. When processing relative packets, negative deltas can cause
unsigned integer underflow if the finger moves past the left or bottom
boundary of the touchpad, wrapping the coordinates to values near
UINT_MAX.
When clamping the coordinates in focaltech_report_state(), these
underflowed values are clamped against priv->x_max / priv->y_max instead
of 0, causing the cursor to jump erratically to the opposite edge of the
touchpad.
Change the coordinate variables and limits to signed int so that
negative values resulting from relative movements clamp correctly to 0,
and write the clamped values back to state in focaltech_report_state()
to prevent coordinate wind-up accumulation at the touchpad boundaries.
Fixes: 05be1d079e ("Input: psmouse - support for the FocalTech PS/2 protocol extensions")
Reported-by: sashiko-bot@kernel.org
Link: https://patch.msgid.link/am_tH_F938rK6ask@google.com
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver allocates max_touch_num input slots, which are indexed from
zero through max_touch_num - 1. The current check allows a finger ID
equal to max_touch_num to reach cst3xx_report_contact(). While the input
core ignores out-of-range slot indices, reporting touch data without a
valid slot change corrupts the touch state of the previously active slot.
The touch count is read from the controller's report and is used to
index the fixed-size report buffer without first checking its range.
Reject counts larger than the supported number of touch slots before
checking the trailing byte or parsing touch data.
Reject finger IDs equal to or greater than max_touch_num, and return
immediately when an invalid finger ID is encountered so that corrupt
touch frames are discarded instead of reporting partial contact state.
The V821 Avaota F1 board configures the vendor driver with one touch
slot, so finger ID 1 is already invalid on that device.
Fixes: 66603243f5 ("Input: add driver for Hynitron cstxxx touchscreens")
Signed-off-by: Jianing Li <m13940358460@163.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260804031339.2379-1-m13940358460@163.com
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In evdev_pass_values(), the input_event structure is allocated on the
kernel stack and populated field-by-field. However, it is never fully
initialized. On architectures where struct input_event contains explicit
or implicit padding (such as the 32-bit __pad field on SPARC64), these
padding bytes are left uninitialized.
When this event structure is subsequently passed to the client buffer
and later copied to userspace, the uninitialized padding bytes leak
kernel stack memory, potentially exposing sensitive information.
Similar issues exist in __evdev_queue_syn_dropped and __pass_event.
Fix this by explicitly zeroing the entire event structure with memset()
before populating its fields. This ensures all padding bytes are cleared
before the data crosses the security boundary.
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ampGGKo4UMKru6f5@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Replace manual serialization with guard(mutex) and guard(serio_pause_rx)
where appropriate. This eliminates the need for explicit goto-based error
paths.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260727050803.1269941-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Rewrite psmouse_matches_pnp_id() to parse and match the space-separated
PNP ID string directly in place without dynamic memory allocation.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260727050803.1269941-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the past, psmouse_disconnect() used cancel_work_sync(). Because
cancel_work_sync() must be called with the psmouse_mutex dropped, and we
needed to prevent psmouse_receive_byte() from re-queueing the work
behind our back, the code transitioned the device to PSMOUSE_CMD_MODE
while holding the mutex, then dropped the mutex and cancelled the work.
When cancel_work_sync() was replaced with disable_work_sync() in this
path, the mutex juggling remained. However, disable_work_sync()
inherently prevents the work from being executed or re-queued, making
the mutex juggling unnecessary.
Clean this up by moving disable_work_sync() to the very top of
psmouse_disconnect(), before we acquire psmouse_mutex.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260727050803.1269941-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a PS/2 mouse is disconnected or unbound, psmouse_disconnect() calls
the protocol disconnect handler (psmouse->disconnect()). During this time,
stray bytes arriving from the physical controller can still be passed to
psmouse_handle_byte(), which will invoke psmouse->protocol_handler().
This creates an asynchronous race condition with vendor disconnect handlers
(such as synaptics_disconnect()), which free vendor-specific private
structures (psmouse->private). If a byte arrives while the structures
are being freed, it leads to a use-after-free or NULL pointer
dereference in the protocol handler.
Fix this by explicitly setting psmouse->protocol_handler to NULL
safely wrapped in scoped_guard(serio_pause_rx, serio) immediately before
calling the vendor disconnect handler. We also add an unlikely check
in psmouse_handle_byte() to safely drop incoming bytes if the protocol
handler is NULL.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260727050803.1269941-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Insert a hyphen ('-') in 2 places to prevent kernel-doc warnings:
Warning: include/linux/fixp-arith.h:42 This comment starts with '/**',
but isn't a kernel-doc comment.
* __fixp_sin32() returns the sin of an angle in degrees
Warning: include/linux/fixp-arith.h:66 This comment starts with '/**',
but isn't a kernel-doc comment.
* fixp_sin32() returns the sin of an angle in degrees
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260731050625.455556-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Simplify the driver by using the block-scope guard(pm_runtime_active)
instead of manually invoking pm_runtime_get_sync() and
pm_runtime_put().
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-3-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver requests the interrupt during probe, which by default enables
it. If the bootloader left the keypad interrupts enabled, or if a
spurious interrupt fires early before the driver is fully initialized
and clocks are enabled, the interrupt handler will attempt to read
registers and may cause a synchronous external abort.
Fix this by requesting the interrupt with IRQF_NO_AUTOEN, keeping it
disabled during probe. Enable the interrupt in samsung_keypad_start()
when the device is opened and ready, and disable it in
samsung_keypad_stop() when the device is closed. Remove the redundant
re-enabling of the interrupt at the end of samsung_keypad_stop().
Additionally, manually clear the pending interrupt status during system
resume when the device is closed to avoid immediate resume.
Fixes: 0fffed27f9 ("Input: samsung-keypad - Add samsung keypad driver")
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-2-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When checking if the device can wake the system, we should pull the
device_may_wakeup() check to the caller instead of repeating it inside
the toggle_wakeup() handler. Furthermore, when configuring the wakeup,
we should safely ensure we write to the registers in the correct order:
configure the interrupt receiver before enabling the peripheral's wake
functionality, and vice-versa.
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-1-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make finger2 (and also finger1) unsigned, so that if the finger index in
the packet is 0 then subtracting 1 creates an array index which overflows
above the existing check for FOC_MAX_FINGERS, as the existing comment says
it should, instead of writing to state->fingers[-1].
Fixes: 05be1d079e ("Input: psmouse - support for the FocalTech PS/2 protocol extensions")
Signed-off-by: Richard Davies <richard@arachsys.com>
Link: https://patch.msgid.link/20260701190932.14960-1-richard@arachsys.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026)
does not work after boot.
Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard
functional, but the CapsLock LED does not work. Adding the
'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED
natively without requiring boot parameters.
DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026
Fixes: 9cf6e24c9f ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com>
Tested-by: Ruslan Shevchenko <adefka@gmail.com>
Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com
Cc: stable@vger.kernel.org
[dtor: keep all HONOR entries together]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The internal keyboard of the Xiaomi Book Pro 14 does not work unless
atkbd skips deactivating it at the end of atkbd_probe().
Using 'i8042.dumbkbd=1' also makes the keyboard work, but then the driver
never writes to the keyboard at all, so the Caps Lock LED is lost. The
atkbd_deactivate_fixup quirk fixes both without a boot parameter.
DMI: XIAOMI Xiaomi Book Pro 14/TM2424, BIOS XMAPT4B0P0909 05/06/2026
Signed-off-by: Zhefu Zhang <a723356@gmail.com>
Reviewed-by: Andrew Zhou <zhoulol888@gmail.com>
Link: https://patch.msgid.link/20260802031559.19701-1-a723356@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
