Configure HE OBSS PD for spatial reuse in ath12k based on mac80211
HE SPR parameters in AP mode. This adds a pdev-level helper that
programs SRG/non-SRG OBSS PD thresholds, per-AC enablement, SR prohibit
control, and SRG/non-SRG BSS color and partial BSSID bitmaps via WMI.
Replace the previous vdev-level OBSS SPR command usage with the new
pdev-level configuration path, allowing firmware to apply HE spatial
reuse behavior according to the HE SPR/OBSS PD settings provided by
mac80211.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123064817.364047-3-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add WMI support for configuring SRG and non-SRG OBSS PD bitmaps at
the pdev level. The new commands allow the host to set BSS color bitmaps,
partial BSSID bitmaps, and the corresponding enable masks used for
SRG/non-SRG OBSS PD processing.
Introduce new WMI command IDs, TLV tags, a service flag
(WMI_TLV_SERVICE_SRG_SRP_SPATIAL_REUSE_SUPPORT), and a bitmap payload
structure required by these commands. These additions are needed to
support HE Spatial Reuse and firmware-managed OBSS PD behavior.
The APIs introduced in this patch will be utilized in an upcoming patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Wei Zhang <wei.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123064817.364047-2-wei.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The firmware-name property was originally introduced to allow end-users
and integrators to select use-case-specific firmware for the WCN6855.
However, specifying firmware for an M.2 WLAN module in the Device Tree
is not appropriate. Instead, this functionality will be handled within
the ath11k driver. Therefore, the firmware-name property is now
deprecated.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121095055.3683957-3-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
For M.2 WLAN chips, there is no suitable DTS node to specify the
firmware-name property. In addition, assigning firmware for the
M.2 PCIe interface causes chips that do not use usecase specific
firmware to fail. Therefore, abandoning the approach of specifying
firmware in DTS. As an alternative, propose a static lookup table
mapping device compatible to firmware names. Currently, only WCN6855
HW2.1 requires this.
However, support for the firmware-name property is retained to keep
the ABI backwards compatible.
For details on usecase specific firmware, see:
https://lore.kernel.org/all/20250522013444.1301330-3-miaoqing.pan@oss.qualcomm.com/.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Fixes: edbbc647c4 ("wifi: ath11k: support usercase-specific firmware overrides")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121095055.3683957-2-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath10k_sdio_fw_crashed_dump() calls ath10k_coredump_new() which requires
ar->dump_mutex to be held, as indicated by lockdep_assert_held() in that
function. However, the SDIO implementation does not acquire this lock,
unlike the PCI and SNOC implementations which properly hold the mutex.
Additionally, ar->stats.fw_crash_counter is documented as protected by
ar->data_lock in core.h, but the SDIO implementation modifies it without
holding this spinlock.
Add the missing mutex_lock()/mutex_unlock() around the coredump
operations, and add spin_lock_bh()/spin_unlock_bh() around the
fw_crash_counter increment, following the pattern used in
ath10k_pci_fw_dump_work() and ath10k_snoc_fw_crashed_dump().
Fixes: 3c45f21af8 ("ath10k: sdio: add firmware coredump support")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123045822.2221549-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath10k_wmi_event_peer_sta_ps_state_chg() uses lockdep_assert_held() to
assert that ar->data_lock should be held by the caller, but neither
ath10k_wmi_10_2_op_rx() nor ath10k_wmi_10_4_op_rx() acquire this lock
before calling this function.
The field arsta->peer_ps_state is documented as protected by
ar->data_lock in core.h, and other accessors (ath10k_peer_ps_state_disable,
ath10k_dbg_sta_read_peer_ps_state) properly acquire this lock.
Add spin_lock_bh()/spin_unlock_bh() around the peer_ps_state update,
and remove the lockdep_assert_held() to be aligned with new locking,
following the pattern used by other WMI event handlers in the driver.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123175611.767731-1-n7l8m4@u.northwestern.edu
[removed excess blank line]
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The WCN39xx family of WiFi/BT chips incorporates a simple PMU, spreading
voltages over internal rails. Implement support for using powersequencer
for this family of ATH10k devices in addition to using regulators.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260119-wcn3990-pwrctl-v3-3-948df19f5ec2@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
- Partial NAN support - without DATA
- Initial UHR support
- UNII-9 support
- EHT code cleanup in iwlmvm
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCaXDIsAAKCRDacY7uyt+O
fQWjAQCjlDYAmOr6TbN8ZnQBNJncRPyl393KbIgqxL2McGdYJAEAo9JXnMjpI+z5
ezVGNSJRhEXDP/2MEwR5IzNCb2cvyAw=
=Ctdt
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-2026-01-21' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi features. Notably:
- Partial NAN support - without DATA
- Initial UHR support
- UNII-9 support
- EHT code cleanup in iwlmvm
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Highlights for some specific drivers include:
ath11k:
Add support for Channel Frequency Response measurement.
ath12k:
Add support for the QCC2072 chipset.
And of course there is the usual set of cleanups and bug fixes across
the entire family of "ath" drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaW+dBQAKCRAsFbugiYzL
e1/sAP0fkZQaEECdvUz3VZQuiWQK/+P5wBtXggrjnPDTGkGUowEAs66hradqoKqK
LQA0pwfT9f1BKvQj1MVnc6o74O+6HAA=
=AP4S
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20260120' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v6.20 (#2)
Highlights for some specific drivers include:
ath11k:
Add support for Channel Frequency Response measurement.
ath12k:
Add support for the QCC2072 chipset.
And of course there is the usual set of cleanups and bug fixes across
the entire family of "ath" drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
il4965_store_tx_power() calls il_set_tx_power() without holding il->mutex.
However, il_set_tx_power() has lockdep_assert_held(&il->mutex) indicating
that callers must hold this lock.
All other callers of il_set_tx_power() properly acquire the mutex:
- il_bg_scan_completed() acquires mutex at common.c:1683
- il_mac_config() acquires mutex at common.c:5006
- il3945_commit_rxon() and il4965_commit_rxon() are called via work
queues that hold the mutex (like il4965_bg_alive_start)
Add mutex_lock()/mutex_unlock() around the il_set_tx_power() call in
the sysfs store function to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260125194039.1196488-1-n7l8m4@u.northwestern.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
il3945_store_measurement() calls il3945_get_measurement() which internally
calls il_send_cmd_sync() without holding il->mutex. However,
il_send_cmd_sync() has lockdep_assert_held(&il->mutex) indicating that
callers must hold this lock.
Other sysfs store functions in the same file properly acquire the mutex:
- il3945_store_flags() acquires mutex at 3945-mac.c:3110
- il3945_store_filter_flags() acquires mutex at 3945-mac.c:3144
Add mutex_lock()/mutex_unlock() around the il3945_get_measurement() call
in the sysfs store function to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260125193005.1090429-1-n7l8m4@u.northwestern.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. Convert to u64_stats_t to ensure atomic
operations.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260123203845.2915525-1-mmyangfl@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In p54_beacon_update(), beacon is allocated via ieee80211_beacon_get().
If p54_beacon_format_ie_tim() fails, the function returns immediately
without freeing the allocated beacon skb, which would lead to a memory
leak.
Since no other references to this memory exist, it must be freed locally
before returning the error. Fix this by freeing the buffer using
dev_kfree_skb_any() in the error path.
Note that this error path is unreachable in practice because mac80211
guarantees a minimum TIM length of 4 bytes for non-S1G devices. This
change primarily serves to silence static analysis warnings and keep
the error handling logic complete.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20260122085945.444955-1-zilin@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Although value 4 (INDOOR_SP_AP_OLD) is deprecated in IEEE standards,
existing APs may still use this control value. Since this value is
based on the old specification, we cannot trust such APs implement
proper power controls.
Therefore, move IEEE80211_6GHZ_CTRL_REG_INDOOR_SP_AP_OLD case
from SP_AP to LPI_AP power type handling to prevent potential
power limit violations.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111163601.6b5a36d3601e.I1704ee575fd25edb0d56f48a0a3169b44ef72ad0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To prepare sdio drivers to migrate away from struct device_driver::shutdown
(and then eventually remove that callback) create a serdev driver shutdown
callback and migration code to keep the existing behaviour. Note this
introduces a warning for each driver that isn't converted yet to that
callback at register time.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/397f45c2818f6632151f92b70e547262f373c3b6.1768232321.git.u.kleine-koenig@baylibre.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an option to operate as the RSTA in an FTM measurement request.
When requested, the device will dwell on the requested channel until
the peer starts the FTM negotiation. This option is only valid for
trigger-based/non trigger-based measurement with LMR feedback which
will allow the RSTA to receive the results of the measurement.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.1f95fc0afab4.Iae2d32783b8e7c4a29089fec0f4c6bce94d303cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The FTM result includes some of the periodic measurement negotiated
parameters (like the burst duration and number of bursts), but it
doesn't include the burst period. Add it to the FTM result
notification.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.e0778f86edef.I3c98c1933eb639963bc3ffdef81a8788b59f2188@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Periodic FTM request attributes are defined based on the periodic
parameters used in EDCA-based ranging negotiation. However, non-EDCA
based ranging (trigger-based/non-trigger-based) does not include
periodic parameters in the negotiation protocol, even though upper
layers may still request periodic measurements.
Clarify the semantics of periodic ranging attributes when used with
non-EDCA based ranging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.b89cb3f68e1a.I7a9d8c6d1c66c77f1b43120a841101c96c3f19ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add new capabilities to the PMSR FTM capabilities list. The new
capabilities include 6 GHz support, supported number of spatial streams
and supported number of LTF repetitions.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.bf43785c18f6.Ic98cf9790ddee84bf88e5720b93c46c23af3c96c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As part of removal of EMLSR support from mvm, remove
link_id parameter from time_events. Additionally,
remove link_id parameter from iwl_mvm_protect_assoc
as we can now directly use deflink.
Signed-off-by: Nidhish A N <nidhish.a.n@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111193638.9475bb832db6.I5829b0a2a9a5b56fe885eb0f1e1ad8cd70bc69ff@changeid
While the cluster_id is two bytes long, it is just the last two bytes of
the cluster ID MAC address. This does not really map to a big or little
endian data type. Switch it to use an array to avoid confusion and
adjust all users so that they do the right thing independent of
endianness.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111193638.80921dc7d305.I56c2bbe0bfc6ee02782bc5d69fda2ac77f3502c4@changeid
This command is getting a new field for UNII-9 and ieee80211bn
enablement.
We must read the relevant DSM values and pass them to the firmware,
Remember whether we have ACPI or UEFI available in the firmware runtime
object and remember the DSM function revision.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111193638.9577f0cade21.I82b26f082f152a83eb9990dddf68d7dcc549f227@changeid
Instead of reading the DSM functions on demand, just read them all
when the first DSM function is called and cache the values for all
the other DSM functions. This simplifies the flow.
Since the same will be done for UEFI in the next patch, remove the
ifdef CONFIG_ACPI around the relevant variables.
Once UEFI's cache will be implemented, we'll be able to change
iwl_bios_get_dsm to access the cache directly.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111193638.732ff6856796.Iff844bfbb0fea3c3d9654a53254a5b14dbaec8c1@changeid
iwlmvm is the only op_mode that uses the lari helper functions. iwlmld
has its own version to avoid introducing regressions.
Move all those functions to iwlmvm, as they are more related to the
op_mode.
iwl_get_lari_config_bitmap will move in the next patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111193638.4bb241e436cb.I3d80796d4722376ce24a847419d34723083baaa8@changeid
When assigning emlsr.primary with emlsr.selected_primary
we are checking if BIT(mld_vif->emlsr.selected_links) are
a part of vif->active_links. This is incorrect as
emlsr.selected_links is a bitmap of possibly two selected links.
Therefore, performing the BIT() operation on it does not
yield any meaningful result and almost always leads to
incorrect primary link selection.
Additionally, we cannot rely on vif->active_links at this
stage of the link switch flow because it contains both the
removed links and also the newly added links.
For example, if we had selected links in the past (0x11)
and we now select links because of TTLM/debugfs (0x100),
vif->active_links will now be (0x111) and primary link
will be 0, while 0 is not even an active link. Thus,
we create our own bitmap of final active links.
Signed-off-by: Nidhish A N <nidhish.a.n@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111193638.38b2e14e3a20.Ie81a88dfff0c5d2becedabab8398702808f6b1bf@changeid
A link pair in which both links are in 5 GHz can be used for EMLSR only
if they are separated enough.
To check this condition we calculate the start and the end of the
chandefs of both links in the pair and do some checks.
But the calculation of the start/end of the chandef is currently done
by subtracting/adding half the bandwidth from/to the control channel's
center frequency, when it should really be subtracted/added from/to the
center frequency of the entire chandef.
Fix the wrong calculation.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111193638.2138fdb99bd5.I4d2e5957b22482a57b1d6ca444e90fcf73bf2cab@changeid
These values should be taken from SIG-A, indicating how SIG-B
is encoded. The values taken from SIG-B (the corresponding
register) indicate how the data portion (for that user) is
encoded. For the SIG-B compression value the correct mask was
applied to the wrong value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.4d625e05dece.If295eb9382fc681d63b0853261d884cd1a833ba5@changeid
Add the necessary data definitions for the sniffer-related fields
reported for the various UHR frame formats by the firmware/hardware
to be able to later add the necessary sniffer code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.358b51dd8cb2.I16178416dd7019cb88a45e55f81eb28510982028@changeid
Fix unsafe power type mapping for iwl_txpower_constraints_cmd
that breaks if enum values change. Replace "power_type - 1" with
explicit case handling for each power type.
While on it, Add debug logging to show configured power type.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.f3b15566dac8.I31b900ab161fb627158dc1b3e2fc4ab35d84fddf@changeid
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.16e8c2d70c26.Iadfcc1aedf43c5175b3f0757bea5aa232454f1ac@changeid
In version 6, a phy id is added to the tlc command and the sta_id
becomes a sta_mask.
This change is required for NAN:
- in NAN we can have 2 logical stations of the same physical
station and with the same channel/band (2 NDIs with the same peer) -
hence the sta_mask.
- In NAN we can have more than one TLC configuration for a single
station (for example if it operates on more than one channel) - so the
FW needs to be able to find the right TLC context, based on the phy id.
Populate the new version (for now with a single station id only. The
other ones will be added later when NAN is implemented).
In case the FW has a lower version than that - convert it to the FW
version.
Note that there is some code duplicantion in the conversions to v5
and to v4, but this is intentional since v5 will be removed as soon as
v6 is supported.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.64220c6b292b.I2f5d195ce2bf9d35398f0f6f2d5faf9e90ae45a4@changeid
The firmware can request us to trigger a dump upon specific
notifications. In order for that flow to work, we need to call the
firmware debug infra when we get a notification from the firmware.
This was missing.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.d6d7e69c7da6.I40f891ece6f98983e0fd2cd0c6863f8620ca08aa@changeid
Fix the documentation comment for the ap_type field
in AP_TX_POWER_CONSTRAINTS_CMD to reference the correct
enum iwl_6ghz_ap_type.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.d70f56dd24b0.I82956bd93a36c7fa5585f014c197afea0610a076@changeid
- iwl_mvm_scan_umac_chan_flags_v2() computes channel params flags
that are only relevant for 2.4/5 GHz scan, explicitly clear
the flags for 6 GHz scan.
- n_aps_override[0] and n_aps_override[1] are not relevant for
6 GHz scan, remove them.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.3b4f8ed30498.I014c098e64118fe3adaf6db07816e7df8ea4f79e@changeid
