Matthieu Baerts says:
====================
selftests: mptcp: join: fix some flaky tests
When looking at the recent CI results on NIPA and MPTCP CIs, a few MPTCP
Join tests are marked as unstable. Here are some fixes for that.
- Patch 1: a small fix for mptcp_connect.sh, printing a note as
initially intended. For >=v5.13.
- Patch 2: avoid unexpected reset when closing subflows. For >= 5.13.
- Patches 3-4: longer transfer when not waiting for the end. For >=5.18.
- Patch 5: read all received data when expecting a reset. For >= v6.1.
- Patch 6: a fix to properly kill background tasks. For >= v6.5.
====================
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-0-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'run_tests' function is executed in the background, but killing its
associated PID would not kill the children tasks running in the
background.
To properly kill all background tasks, 'kill -- -PID' could be used, but
this requires kill from procps-ng. Instead, all children tasks are
listed using 'ps', and 'kill' is called with all PIDs of this group.
Fixes: 31ee4ad86a ("selftests: mptcp: join: stop transfer when check is done (part 1)")
Cc: stable@vger.kernel.org
Fixes: 04b57c9e09 ("selftests: mptcp: join: stop transfer when check is done (part 2)")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-6-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP Join "fastclose server" selftest is sometimes failing because the
client output file doesn't have the expected size, e.g. 296B instead of
1024B.
When looking at a packet trace when this happens, the server sent the
expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE.
It is then strange to see the client only receiving 296B, which would
mean it only got a part of the second packet. The problem is then not on
the networking side, but rather on the data reception side.
When mptcp_connect is launched with '-f -1', it means the connection
might stop before having sent everything, because a reset has been
received. When this happens, the program was directly stopped. But it is
also possible there are still some data to read, simply because the
previous 'read' step was done with a buffer smaller than the pending
data, see do_rnd_read(). In this case, it is important to read what's
left in the kernel buffers before stopping without error like before.
SIGPIPE is now ignored, not to quit the app before having read
everything.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all userspace tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Fixes: b2e2248f36 ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081 ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-4-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all endpoints tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 69c6ce7b6e ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Fixes: e274f71540 ("selftests: mptcp: add subflow limits test-cases")
Fixes: b5e2fb832f ("selftests: mptcp: add explicit test case for remove/readd")
Fixes: e06959e9ee ("selftests: mptcp: join: test for flush/re-add endpoints")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a80 ("selftests: mptcp: add testcases for removing addrs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "fallback due to TCP OoO" was never printed because the stat_ooo_now
variable was checked twice: once in the parent if-statement, and one in
the child one. The second condition was then always true then, and the
'else' branch was never taken.
The idea is that when there are more ACK + MP_CAPABLE than expected, the
test either fails if there was no out of order packets, or a notice is
printed.
Fixes: 69ca3d29a7 ("mptcp: update selftest for fallback due to OoO")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building documentation produced the following warning:
WARNING: ./include/linux/ethtool.h:495 This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* IEEE 802.3ck/df defines 16 bins for FEC histogram plus one more for
This comment was not intended to be parsed as kernel-doc, so replace
the '/**' with '/*' to silence the warning and align with normal
comment style in header files.
No functional changes.
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Link: https://patch.msgid.link/20251110182545.2112596-1-kriish.sharma2006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, CQs without a completion function are assigned the
mlx5_add_cq_to_tasklet function by default. This is problematic since
only user CQs created through the mlx5_ib driver are intended to use
this function.
Additionally, all CQs that will use doorbells instead of polling for
completions must call mlx5_cq_arm. However, the default CQ creation flow
leaves a valid value in the CQ's arm_db field, allowing FW to send
interrupts to polling-only CQs in certain corner cases.
These two factors would allow a polling-only kernel CQ to be triggered
by an EQ interrupt and call a completion function intended only for user
CQs, causing a null pointer exception.
Some areas in the driver have prevented this issue with one-off fixes
but did not address the root cause.
This patch fixes the described issue by adding defaults to the create CQ
flow. It adds a default dummy completion function to protect against
null pointer exceptions, and it sets an invalid command sequence number
by default in kernel CQs to prevent the FW from sending an interrupt to
the CQ until it is armed. User CQs are responsible for their own
initialization values.
Callers of mlx5_core_create_cq are responsible for changing the
completion function and arming the CQ per their needs.
Fixes: cdd04f4d4d ("net/mlx5: Add support to create SQ and CQ for ASO")
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/1762681743-1084694-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For chips with security enabled, it's only possible to load firmware
with a valid signature pattern.
If key_id is not zero, it indicates a security chip, and the driver will
not load the config file.
- Example log for a security chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a
lmp_ver=0c lmp_subver=8922
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: btrtl_initialize: key id 1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin
Bluetooth: hci0: RTL: cfg_sz 0, total sz 71301
Bluetooth: hci0: RTL: fw version 0x41c0c905
- Example log for a normal chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a
lmp_ver=0c lmp_subver=8922
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: btrtl_initialize: key id 0
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_config.bin
Bluetooth: hci0: RTL: cfg_sz 6, total sz 71307
Bluetooth: hci0: RTL: fw version 0x41c0c905
Tested-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Nial Ni <niall_ni@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change the debug message to print the correct units instead of always
assuming Gbps, as the value can be in either 100 Mbps or 1 Gbps units.
Fixes: 5da8bc3eff ("net/mlx5e: DCBNL, Add debug messages log")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The previous calculation used roundup() which caused an overflow for
rates between 25.5Gbps and 26Gbps.
For example, a rate of 25.6Gbps would result in using 100Mbps units with
value of 256, which would overflow the 8 bits field.
Simplify the upper_limit_mbps calculation by removing the
unnecessary roundup, and adjust the comparison to use <= to correctly
handle the boundary condition.
Fixes: d8880795da ("net/mlx5e: Implement DCBNL IEEE max rate")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When trying to set num_doorbells to a value greater than the max number
of channels, the error message was going over the netlink limit of 80
chars, truncating the most important part of the message, the number of
channels.
Fix that by trimming the length a bit.
Fixes: 11bbcfb766 ("net/mlx5e: Use the 'num_doorbells' devlink param")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix a KMSAN kernel-infoleak detected by the syzbot .
[net?] KMSAN: kernel-infoleak in __skb_datagram_iter
In tcf_ife_dump(), the variable 'opt' was partially initialized using a
designatied initializer. While the padding bytes are reamined
uninitialized. nla_put() copies the entire structure into a
netlink message, these uninitialized bytes leaked to userspace.
Initialize the structure with memset before assigning its fields
to ensure all members and padding are cleared prior to beign copied.
This change silences the KMSAN report and prevents potential information
leaks from the kernel memory.
This fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures no infoleak.
Reported-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c85cae3350b7d486aee
Tested-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com
Fixes: ef6980b6be ("introduce IFE action")
Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251109091336.9277-3-vnranganath.20@gmail.com
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This handles PA Sync Lost event which previously was assumed to be
handled with BIG Sync Lost but their lifetime are not the same thus why
there are 2 different events to inform when each sync is lost.
Fixes: b2a5f2e1c1 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Quang Le reported that the AF_UNIX GC could garbage-collect a
receive queue of an alive in-flight socket, with a nice repro.
The repro consists of three stages.
1)
1-a. Create a single cyclic reference with many sockets
1-b. close() all sockets
1-c. Trigger GC
2)
2-a. Pass sk-A to an embryo sk-B
2-b. Pass sk-X to sk-X
2-c. Trigger GC
3)
3-a. accept() the embryo sk-B
3-b. Pass sk-B to sk-C
3-c. close() the in-flight sk-A
3-d. Trigger GC
As of 2-c, sk-A and sk-X are linked to unix_unvisited_vertices,
and unix_walk_scc() groups them into two different SCCs:
unix_sk(sk-A)->vertex->scc_index = 2 (UNIX_VERTEX_INDEX_START)
unix_sk(sk-X)->vertex->scc_index = 3
Once GC completes, unix_graph_grouped is set to true.
Also, unix_graph_maybe_cyclic is set to true due to sk-X's
cyclic self-reference, which makes close() trigger GC.
At 3-b, unix_add_edge() allocates unix_sk(sk-B)->vertex and
links it to unix_unvisited_vertices.
unix_update_graph() is called at 3-a. and 3-b., but neither
unix_graph_grouped nor unix_graph_maybe_cyclic is changed
because both sk-B's listener and sk-C are not in-flight.
3-c decrements sk-A's file refcnt to 1.
Since unix_graph_grouped is true at 3-d, unix_walk_scc_fast()
is finally called and iterates 3 sockets sk-A, sk-B, and sk-X:
sk-A -> sk-B (-> sk-C)
sk-X -> sk-X
This is totally fine. All of them are not yet close()d and
should be grouped into different SCCs.
However, unix_vertex_dead() misjudges that sk-A and sk-B are
in the same SCC and sk-A is dead.
unix_sk(sk-A)->scc_index == unix_sk(sk-B)->scc_index <-- Wrong!
&&
sk-A's file refcnt == unix_sk(sk-A)->vertex->out_degree
^-- 1 in-flight count for sk-B
-> sk-A is dead !?
The problem is that unix_add_edge() does not initialise scc_index.
Stage 1) is used for heap spraying, making a newly allocated
vertex have vertex->scc_index == 2 (UNIX_VERTEX_INDEX_START)
set by unix_walk_scc() at 1-c.
Let's track the max SCC index from the previous unix_walk_scc()
call and assign the max + 1 to a new vertex's scc_index.
This way, we can continue to avoid Tarjan's algorithm while
preventing misjudgments.
Fixes: ad081928a8 ("af_unix: Avoid Tarjan's algorithm if unnecessary.")
Reported-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251109025233.3659187-1-kuniyu@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Breno Leitao says:
====================
net: netpoll: fix memory leak and add comprehensive selftests
Fix a memory leak in netpoll and introduce netconsole selftests that
expose the issue when running with kmemleak detection enabled.
This patchset includes a selftest for netpoll with multiple concurrent
users (netconsole + bonding), which simulates the scenario from test[1]
that originally demonstrated the issue allegedly fixed by commit
efa95b01da ("netpoll: fix use after free") - a commit that is now
being reverted.
Sending this to "net" branch because this is a fix, and the selftest
might help with the backports validation.
Link: https://lore.kernel.org/lkml/96b940137a50e5c387687bb4f57de8b0435a653f.1404857349.git.decot@googlers.com/ [1]
====================
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-0-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a selftest that verifies netconsole functionality
over bonded network interfaces using netdevsim. It sets up two bonded
interfaces acting as transmit (TX) and receive (RX) ends, placed in
separate network namespaces. The test sends kernel log messages and
verifies that they are properly received on the bonded RX interfaces
with both IPv4 and IPv6, and using basic and extended netconsole
formats.
This patchset aims to test a long-standing netpoll subsystem where
netpoll has multiple users. (in this case netconsole and bonding). A
similar selftest has been discussed in [1] and [2].
This test also tries to enable bonding and netpoll in different order,
just to guarantee that all the possibilities are exercised.
Link: https://lore.kernel.org/all/20250905-netconsole_torture-v3-0-875c7febd316@debian.org/ [1]
Link: https://lore.kernel.org/lkml/96b940137a50e5c387687bb4f57de8b0435a653f.1404857349.git.decot@googlers.com/ [2]
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-4-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a netconsole test that puts a lot of pressure on the netconsole
list manipulation. Do it by creating dynamic targets and deleting
targets while messages are being sent. Also put interface down while the
messages are being sent, as creating parallel targets.
The code launches three background jobs on distinct schedules:
* Toggle netcons target every 30 iterations
* create and delete random_target every 50 iterations
* toggle iface every 70 iterations
This creates multiple concurrency sources that interact with netconsole
states. This is good practice to simulate stress, and exercise netpoll
and netconsole locks.
This test already found an issue as reported in [1]
Link: https://lore.kernel.org/all/20250901-netpoll_memleak-v1-1-34a181977dfc@debian.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-3-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the netconsole target creation from create_dynamic_target(), by
moving it from create_dynamic_target() into a new helper function. This
enables other tests to use the creation of netconsole targets with
arbitrary parameters and no sleep.
The new helper will be utilized by forthcoming torture-type selftests
that require dynamic target management.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-2-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit efa95b01da ("netpoll: fix use after free") incorrectly
ignored the refcount and prematurely set dev->npinfo to NULL during
netpoll cleanup, leading to improper behavior and memory leaks.
Scenario causing lack of proper cleanup:
1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is
allocated, and refcnt = 1
- Keep in mind that npinfo is shared among all netpoll instances. In
this case, there is just one.
2) Another netpoll is also associated with the same NIC and
npinfo->refcnt += 1.
- Now dev->npinfo->refcnt = 2;
- There is just one npinfo associated to the netdev.
3) When the first netpolls goes to clean up:
- The first cleanup succeeds and clears np->dev->npinfo, ignoring
refcnt.
- It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);`
- Set dev->npinfo = NULL, without proper cleanup
- No ->ndo_netpoll_cleanup() is either called
4) Now the second target tries to clean up
- The second cleanup fails because np->dev->npinfo is already NULL.
* In this case, ops->ndo_netpoll_cleanup() was never called, and
the skb pool is not cleaned as well (for the second netpoll
instance)
- This leaks npinfo and skbpool skbs, which is clearly reported by
kmemleak.
Revert commit efa95b01da ("netpoll: fix use after free") and adds
clarifying comments emphasizing that npinfo cleanup should only happen
once the refcount reaches zero, ensuring stable and correct netpoll
behavior.
Cc: <stable@vger.kernel.org> # 3.17.x
Cc: Jay Vosburgh <jv@jvosburgh.net>
Fixes: efa95b01da ("netpoll: fix use after free")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-1-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aksh Garg says:
====================
Fix IET verification implementation for CPSW driver
The CPSW module supports Intersperse Express Traffic (IET) and allows
the MAC layer to verify whether the peer supports IET through its MAC
merge sublayer, by sending a verification packet and waiting for its
response until the timeout. As defined in IEEE 802.3 Clause 99, the
verification process involves up to 3 verification attempts to
establish support.
This patch series fixes issues in the implementation of this IET
verification process.
====================
Link: https://patch.msgid.link/20251106092305.1437347-1-a-garg7@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The am65_cpsw_iet_verify_wait() function attempts verification 20 times,
toggling the AM65_CPSW_PN_IET_MAC_LINKFAIL bit in each iteration. When
the LINKFAIL bit transitions from 1 to 0, the MAC merge layer initiates
the verification process and waits for the timeout configured in
MAC_VERIFY_CNT before automatically retransmitting. The MAC_VERIFY_CNT
register is configured according to the user-defined verify/response
timeout in am65_cpsw_iet_set_verify_timeout_count(). As per IEEE 802.3
Clause 99, the hardware performs this automatic retry up to 3 times.
Current implementation toggles LINKFAIL after the user-configured
verify/response timeout in each iteration, forcing the hardware to
restart verification instead of respecting the MAC_VERIFY_CNT timeout.
This bypasses the hardware's automatic retry mechanism.
Fix this by moving the LINKFAIL bit toggle outside the retry loop and
reducing the retry count from 20 to 3. The software now only monitors
the status register while the hardware autonomously handles the 3
verification attempts at proper MAC_VERIFY_CNT intervals.
Fixes: 49a2eb9068 ("net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Link: https://patch.msgid.link/20251106092305.1437347-3-a-garg7@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CPSW module uses the MAC_VERIFY_CNT bit field in the
CPSW_PN_IET_VERIFY_REG_k register to set the verify/response timeout
count. This register specifies the number of clock cycles to wait before
resending a verify packet if the verification fails.
The verify/response timeout count, as being set by the function
am65_cpsw_iet_set_verify_timeout_count() is hardcoded for 125MHz
clock frequency, which varies based on PHY mode and link speed.
The respective clock frequencies are as follows:
- RGMII mode:
* 1000 Mbps: 125 MHz
* 100 Mbps: 25 MHz
* 10 Mbps: 2.5 MHz
- QSGMII/SGMII mode: 125 MHz (all speeds)
Fix this by adding logic to calculate the correct timeout counts
based on the actual PHY interface mode and link speed.
Fixes: 49a2eb9068 ("net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Link: https://patch.msgid.link/20251106092305.1437347-2-a-garg7@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In tls_handshake_accept(), a netlink message is allocated using
genlmsg_new(). In the error handling path, genlmsg_cancel() is called
to cancel the message construction, but the message itself is not freed.
This leads to a memory leak.
Fix this by calling nlmsg_free() in the error path after genlmsg_cancel()
to release the allocated memory.
Fixes: 2fd5532044 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20251106144511.3859535-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current CLC proposal message construction uses a mix of
`ini->smc_type_v1/v2` and `pclc_base->hdr.typev1/v2` to decide whether
to include optional extensions (IPv6 prefix extension for v1, and v2
extension). This leads to a critical inconsistency: when
`smc_clc_prfx_set()` fails - for example, in IPv6-only environments with
only link-local addresses, or when the local IP address and the outgoing
interface’s network address are not in the same subnet.
As a result, the proposal message is assembled using the stale
`ini->smc_type_v1` value—causing the IPv6 prefix extension to be
included even though the header indicates v1 is not supported.
The peer then receives a malformed CLC proposal where the header type
does not match the payload, and immediately resets the connection.
The fix ensures consistency between the CLC header flags and the actual
payload by synchronizing `ini->smc_type_v1` with `pclc_base->hdr.typev1`
when prefix setup fails.
Fixes: 8c3dca341a ("net/smc: build and send V2 CLC proposal")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20251107024029.88753-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netif_carrier_ok() doesn't check if the slave is up. Before the below
commit, netif_running() was also checked.
Fixes: 23a6037ce7 ("bonding: Remove support for use_carrier")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20251106180252.3974772-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When freeing indexed arrays, the corresponding free function should
be called for each entry of the indexed array. For example, for
for 'struct tc_act_attrs' 'tc_act_attrs_free(...)' needs to be called
for each entry.
Previously, memory leaks were reported when enabling the ASAN
analyzer.
=================================================================
==874==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
#1 0x55c98db048af in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813
#2 0x55c98db048af in main ./linux/tools/net/ynl/samples/tc-filter-add.c:71
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
#1 0x55c98db04a93 in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813
#2 0x55c98db04a93 in main ./linux/tools/net/ynl/samples/tc-filter-add.c:74
Direct leak of 10 byte(s) in 2 object(s) allocated from:
#0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67
#1 0x55c98db0527d in tc_act_attrs_set_kind ../generated/tc-user.h:1622
SUMMARY: AddressSanitizer: 58 byte(s) leaked in 4 allocation(s).
The following diff illustrates the changes introduced compared to the
previous version of the code.
void tc_flower_attrs_free(struct tc_flower_attrs *obj)
{
+ unsigned int i;
+
free(obj->indev);
+ for (i = 0; i < obj->_count.act; i++)
+ tc_act_attrs_free(&obj->act[i]);
free(obj->act);
free(obj->key_eth_dst);
free(obj->key_eth_dst_mask);
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251106151529.453026-3-zahari.doychev@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Broadcom switches locally terminate link local traffic and do not
forward it, so we should not mark it as offloaded.
In some situations we still want/need to flood this traffic, e.g. if STP
is disabled, or it is explicitly enabled via the group_fwd_mask. But if
the skb is marked as offloaded, the kernel will assume this was already
done in hardware, and the packets never reach other bridge ports.
So ensure that link local traffic is never marked as offloaded, so that
the kernel can forward/flood these packets in software if needed.
Since the local termination in not configurable, check the destination
MAC, and never mark packets as offloaded if it is a link local ether
address.
While modern switches set the tag reason code to BRCM_EG_RC_PROT_TERM
for trapped link local traffic, they also set it for link local traffic
that is flooded (01:80:c2:00:00:10 to 01:80:c2:00:00:2f), so we cannot
use it and need to look at the destination address for them as well.
Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Fixes: 0e62f543be ("net: dsa: Fix duplicate frames flooded by learning")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251109134635.243951-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a possible shift-out-of-bounds [1]
Blamed commit added rto_alpha_max and rto_beta_max set to 1000.
It is unclear if some sctp users are setting very large rto_alpha
and/or rto_beta.
In order to prevent user regression, perform the test at run time.
Also add READ_ONCE() annotations as sysctl values can change under us.
[1]
UBSAN: shift-out-of-bounds in net/sctp/transport.c:509:41
shift exponent 64 is too large for 32-bit type 'unsigned int'
CPU: 0 UID: 0 PID: 16704 Comm: syz.2.2320 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:233 [inline]
__ubsan_handle_shift_out_of_bounds+0x27f/0x420 lib/ubsan.c:494
sctp_transport_update_rto.cold+0x1c/0x34b net/sctp/transport.c:509
sctp_check_transmitted+0x11c4/0x1c30 net/sctp/outqueue.c:1502
sctp_outq_sack+0x4ef/0x1b20 net/sctp/outqueue.c:1338
sctp_cmd_process_sack net/sctp/sm_sideeffect.c:840 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1372 [inline]
Fixes: b58537a1f5 ("net: sctp: fix permissions for rto_alpha and rto_beta knobs")
Reported-by: syzbot+f8c46c8b2b7f6e076e99@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/690c81ae.050a0220.3d0d33.014e.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251106111054.3288127-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Contrary to what was stated on d36349ea73 ("Bluetooth: hci_conn:
Fix running bis_cleanup for hci_conn->type PA_LINK") the PA_LINK does
in fact needs to run bis_cleanup in order to terminate the PA Sync,
since that is bond to the listening socket which is the entity that
controls the lifetime of PA Sync, so if it is closed/released the PA
Sync shall be terminated, terminating the PA Sync shall not result in
the BIG Sync being terminated since once the later is established it
doesn't depend on the former anymore.
If the use user wants to reconnect/rebind a number of BIS(s) it shall
keep the socket open until it no longer needs the PA Sync, which means
it retains full control of the lifetime of both PA and BIG Syncs.
Fixes: d36349ea73 ("Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK")
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_close() needs to be called in l2cap_chan_lock(), otherwise
l2cap_le_sig_cmd() etc. may run concurrently.
Add missing locks around l2cap_chan_close().
Fixes: 6b8d4a6a03 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
disconnect_all_peers() calls sleeping function (l2cap_chan_close) under
spinlock. Holding the lock doesn't actually do any good -- we work on a
local copy of the list, and the lock doesn't protect against peer->chan
having already been freed.
Fix by taking refcounts of peer->chan instead. Clean up the code and
old comments a bit.
Take devices_lock instead of RCU, because the kfree_rcu();
l2cap_chan_put(); construct in chan_close_cb() does not guarantee
peer->chan is necessarily valid in RCU.
Also take l2cap_chan_lock() which is required for l2cap_chan_close().
Log: (bluez 6lowpan-tester Client Connect - Disable)
------
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
...
<TASK>
...
l2cap_send_disconn_req (net/bluetooth/l2cap_core.c:938 net/bluetooth/l2cap_core.c:1495)
...
? __pfx_l2cap_chan_close (net/bluetooth/l2cap_core.c:809)
do_enable_set (net/bluetooth/6lowpan.c:1048 net/bluetooth/6lowpan.c:1068)
------
Fixes: 9030582963 ("Bluetooth: 6lowpan: Converting rwlocks to use RCU")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_put() is exported, so export also l2cap_chan_hold() for
modules.
l2cap_chan_hold() has use case in net/bluetooth/6lowpan.c
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth 6lowpan.c confuses BDADDR_LE and ADDR_LE_DEV address types,
e.g. debugfs "connect" command takes the former, and "disconnect" and
"connect" to already connected device take the latter. This is due to
using same value both for l2cap_chan_connect and hci_conn_hash_lookup_le
which take different dst_type values.
Fix address type passed to hci_conn_hash_lookup_le().
Retain the debugfs API difference between "connect" and "disconnect"
commands since it's been like this since 2015 and nobody apparently
complained.
Fixes: f5ad4ffceb ("Bluetooth: 6lowpan: Use hci_conn_hash_lookup_le() when possible")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth 6lowpan.c netdev has header_ops, so it must set link-local
header for RX skb, otherwise things crash, eg. with AF_PACKET SOCK_RAW
Add missing skb_reset_mac_header() for uncompressed ipv6 RX path.
For the compressed one, it is done in lowpan_header_decompress().
Log: (BlueZ 6lowpan-tester Client Recv Raw - Success)
------
kernel BUG at net/core/skbuff.c:212!
Call Trace:
<IRQ>
...
packet_rcv (net/packet/af_packet.c:2152)
...
<TASK>
__local_bh_enable_ip (kernel/softirq.c:407)
netif_rx (net/core/dev.c:5648)
chan_recv_cb (net/bluetooth/6lowpan.c:294 net/bluetooth/6lowpan.c:359)
------
Fixes: 18722c2470 ("Bluetooth: Enable 6LoWPAN support for BT LE devices")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a KASAN: slab-use-after-free read in btusb_disconnect().
Calling "usb_driver_release_interface(&btusb_driver, data->intf)" will
free the btusb data associated with the interface. The same data is
then used later in the function, hence the UAF.
Fix by moving the accesses to btusb data to before the data is free'd.
Reported-by: syzbot+2fc81b50a4f8263a159b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2fc81b50a4f8263a159b
Tested-by: syzbot+2fc81b50a4f8263a159b@syzkaller.appspotmail.com
Fixes: fd913ef7ce ("Bluetooth: btusb: Add out-of-band wakeup support")
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mesh_send_done timer is not canceled when hdev is removed, which causes
crash if the timer triggers after hdev is gone.
Cancel the timer when MGMT removes the hdev, like other MGMT timers.
Should fix the BUG: sporadically seen by BlueZ test bot
(in "Mesh - Send cancel - 1" test).
Log:
------
BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0
...
Freed by task 36:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x43/0x70
kfree+0x103/0x500
device_release+0x9a/0x210
kobject_put+0x100/0x1e0
vhci_release+0x18b/0x240
------
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Link: https://lore.kernel.org/linux-bluetooth/67364c09.0c0a0220.113cba.39ff@mx.google.com/
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The lan8814 is a quad-phy and it is using QSGMII towards the MAC.
The problem is that everytime when one of the ports is configured then
the PCS is reseted for all the PHYs. Meaning that the other ports can
loose traffic until the link is establish again.
To fix this, do the reset one time for the entire PHY package.
Fixes: ece1950283 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Divya Koppera <Divya.Koppera@microchip.com >
Link: https://patch.msgid.link/20251106090637.2030625-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two additional bytes in front of each frame received into the RX FIFO if
SHIFT16 is set, so we need to subtract the extra two bytes from pkt_len
to correct the statistic of rx_bytes.
Fixes: 3ac72b7b63 ("net: fec: align IP header in hardware")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251106021421.2096585-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
