Florian Westphal says:
====================
netfilter patches for net-next
Remove GPL license copypastry in uapi files, those have SPDX tags.
From Christophe Jaillet.
Remove unused variable in rpfilter, from Guillaume Nault.
Rework gc resched delay computation in conntrack, from Antoine Tenart.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: rpfilter: Remove unused variable 'ret'.
headers: Remove some left-over license text in include/uapi/linux/netfilter/
netfilter: conntrack: revisit the gc initial rescheduling bias
netfilter: conntrack: fix the gc rescheduling delay
====================
Link: https://lore.kernel.org/r/20220921095000.29569-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usually it's not necessary to declare static functions if the symbols are
in the right order. Moving the definition of tsi_eth_driver down in the
compilation unit allows to drop two such declarations.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220919131515.885361-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We've met the problem that when there is a vlan tag inside
GRE encapsulation, the match of num_of_vlans fails.
It is caused by the vlan tag inside GRE payload has been
counted into num_of_vlans, which is not expected.
One example packet is like this:
Ethernet II, Src: Broadcom_68:56:07 (00:10:18:68:56:07)
Dst: Broadcom_68:56:08 (00:10:18:68:56:08)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 100
Internet Protocol Version 4, Src: 192.168.1.4, Dst: 192.168.1.200
Generic Routing Encapsulation (Transparent Ethernet bridging)
Ethernet II, Src: Broadcom_68:58:07 (00:10:18:68:58:07)
Dst: Broadcom_68:58:08 (00:10:18:68:58:08)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 200
...
It should match the (num_of_vlans 1) rule, but it matches
the (num_of_vlans 2) rule.
The vlan tags inside the GRE or other tunnel encapsulated payload
should not be taken into num_of_vlans.
The fix is to stop counting the vlan number when the encapsulation
bit is set.
Fixes: 34951fcf26 ("flow_dissector: Add number of vlan tags dissector")
Signed-off-by: Qingqing Yang <qingqing.yang@broadcom.com>
Reviewed-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Link: https://lore.kernel.org/r/20220919074808.136640-1-qingqing.yang@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Foster says:
====================
clean up ocelot_reset() routine
ocelot_reset() will soon be exported to a common library to be used by
the ocelot_ext system. This will make error values from regmap calls
possible, so they must be checked. Additionally, readx_poll_timeout()
can be substituted for the custom loop, as a simple cleanup.
I don't have hardware to verify this set directly, but there shouldn't
be any functional changes.
====================
Link: https://lore.kernel.org/r/20220917175127.161504-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ocelot_reset() function utilizes regmap_field_write() but wasn't
checking return values. While this won't cause issues for the current MMIO
regmaps, it could be an issue for externally controlled interfaces.
Add checks for these return values.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clean up the reset code by utilizing readx_poll_timeout instead of a custom
loop.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Haoyue Xu says:
====================
net: ll_temac: Cleanup for clearing static warnings
Most static warnings are detected by Checkpatch.pl, mainly about:
(1) #1: About the comments.
(2) #2: About function name in a string.
(3) #3: About the open parenthesis.
(4) #4: About the else branch.
(6) #6: About trailing statements.
(7) #5,#7: About blank lines and spaces.
====================
Link: https://lore.kernel.org/r/20220917103843.526877-1-xuhaoyue1@hisilicon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As Checkpatch.pl warns, prefer using '"%s...", __func__'
to using 'temac_device_reset', this function's name, in a string.
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quite a few of the functions and other symbols defined in this driver had
forward declarations. They can all be dropped after reordering them.
This saves a few lines of code and reduces code duplication.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220917225142.473770-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, driver will always clear user defined field of flow director
in uninit process and sync flow director table in periodic task. However,
if hardware does not support flow director driver should not do those
processes, so add fd ability judgement.
The fd ability judgement in function hclge_clear_fd_rules_in_list() is
redundant, so delete it.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the function hclge_mbx_handler() has too many switch-case
statements, it makes this function too long. To improve code readability,
refactor this function and use lookup table instead.
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when function hns3_nic_select_queue() converts dscp to priority,
it calls an indirect callback ae_algo->ops->get_dscp_prio to get priority.
However as function hns3_nic_select_queue() is in fast path, the indirect
call may cause degradation of performance. For optimization, this patch
moves dscp_app_cnt and dscp_prio from struct hclge_tm_info to struct
hnae3_knic_private_info, so they can be used in both hclge and hns3 layers.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch add support for external loopback test.
The successful test need the link is up with duplex full. The
driver do external loopback first, and then the whole offline
test.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's no clear explanation of what VF Representors are for, their
semantics, etc., outside of vendor docs and random conference slides.
Add a document explaining Representors and defining what drivers that
implement them are expected to do.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220905135557.39233-1-ecree@xilinx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yang Yingliang says:
====================
net: drivers: Switch to use dev_err_probe() helper
In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER. It will print
error code in a human readable way and simplify the code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, register_pernet_subsys() and register_netdevice_notifier() are both
after sock_register(). It can create PF_PACKET socket and process socket
once sock_register() successfully. It is possible PF_PACKET socket is
creating but register_pernet_subsys() and register_netdevice_notifier()
are not registered yet. Thus net->packet.sklist_lock and net->packet.sklist
will be accessed without initialization that is done in packet_net_init().
Although this is a low probability scenario.
Move register_pernet_subsys() and register_netdevice_notifier() to the
front in packet_init(). Correspondingly, adjust the unregister process
in packet_exit().
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return value directly from pskb_trim_rcsum() instead of
getting value from redundant variable err.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 91a178258a ("netfilter: rpfilter: Convert
rpfilter_lookup_reverse to new dev helper") removed the need for the
'ret' variable. This went unnoticed because of the __maybe_unused
annotation.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
When the SPDX-License-Identifier tag has been added, the corresponding
license text has not been removed.
Remove it now.
Also, in xt_connmark.h, move the copyright text at the top of the file
which is a much more common pattern.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
The previous commit changed the way the rescheduling delay is computed
which has a side effect: the bias is now represented as much as the
other entries in the rescheduling delay which makes the logic to kick in
only with very large sets, as the initial interval is very large
(INT_MAX).
Revisit the GC initial bias to allow more frequent GC for smaller sets
while still avoiding wakeups when a machine is mostly idle. We're moving
from a large initial value to pretending we have 100 entries expiring at
the upper bound. This way only a few entries having a small timeout
won't impact much the rescheduling delay and non-idle machines will have
enough entries to lower the delay when needed. This also improves
readability as the initial bias is now linked to what is computed
instead of being an arbitrary large value.
Fixes: 2cfadb761d ("netfilter: conntrack: revisit gc autotuning")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Commit 2cfadb761d ("netfilter: conntrack: revisit gc autotuning")
changed the eviction rescheduling to the use average expiry of scanned
entries (within 1-60s) by doing:
for (...) {
expires = clamp(nf_ct_expires(tmp), ...);
next_run += expires;
next_run /= 2;
}
The issue is the above will make the average ('next_run' here) more
dependent on the last expiration values than the firsts (for sets > 2).
Depending on the expiration values used to compute the average, the
result can be quite different than what's expected. To fix this we can
do the following:
for (...) {
expires = clamp(nf_ct_expires(tmp), ...);
next_run += (expires - next_run) / ++count;
}
Fixes: 2cfadb761d ("netfilter: conntrack: revisit gc autotuning")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
- Delete the repeated word 'to' in the comment.
- Add the missing 'use' word within the sentence.
- Correct spelling on 'malformation', 'needs'.
Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220919053447.5702-1-RuffaloLavoisier@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If CONFIG_DCB is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-,
will be failed, like this:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c: In function ‘otx2_select_queue’:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:1886:19: error: unused variable ‘pf’ [-Werror=unused-variable]
struct otx2_nic *pf = netdev_priv(netdev);
^~
cc1: all warnings being treated as errors
To fix this build error, put the definition of *pf under the CONFIG_DCB.
Fixes: 99c969a83d ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220919025840.256411-1-renzhijie2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
E810 products can support low latency Tx timestamp register read.
This requires usage of threaded IRQ instead of kthread to reduce the
kthread start latency (spikes up to 20 ms).
Add a check for the device capability and use the new method if
supported.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220916201728.241510-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fabio Porcedda says:
====================
Add a secondary AT port to the Telit FN990
In order to add a secondary AT port to the Telit FN990 first add "DUN2"
to mhi_wwan_ctrl.c, after that add a seconday AT port to the
Telit FN990 in pci_generic.c
====================
Link: https://lore.kernel.org/r/20220916144329.243368-1-fabio.porcedda@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a secondary AT port using one of OEM reserved channel.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to have a secondary AT port add "DUN2".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhengchao Shao says:
====================
refactor duplicate codes in the tc cls walk function
The walk implementation of most tc cls modules is basically the same.
That is, the values of count and skip are checked first. If count is
greater than or equal to skip, the registered fn function is executed.
Otherwise, increase the value of count. So the code can be refactored.
Then use helper function to replace the code of each cls module in
alphabetical order.
The walk function is invoked during dump. Therefore, test cases related
to the tdc filter need to be added.
====================
Link: https://lore.kernel.org/r/20220916020251.190097-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 0811: Add multiple basic filter with cmp ematch u8/link layer and
default action and dump them
Test 5129: List basic filters
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 8293: Add tcindex filter with default action
Test 7281: Add tcindex filter with hash size and pass action
Test b294: Add tcindex filter with mask shift and reclassify action
Test 0532: Add tcindex filter with pass_on and continue actions
Test d473: Add tcindex filter with pipe action
Test 2940: Add tcindex filter with miltiple actions
Test 1893: List tcindex filters
Test 2041: Change tcindex filter with pass action
Test 9203: Replace tcindex filter with pass action
Test 7957: Delete tcindex filter with drop action
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 2141: Add rsvp filter with tcp proto and specific IP address
Test 5267: Add rsvp filter with udp proto and specific IP address
Test 2819: Add rsvp filter with src ip and src port
Test c967: Add rsvp filter with tunnelid and continue action
Test 5463: Add rsvp filter with tunnel and pipe action
Test 2332: Add rsvp filter with miltiple actions
Test 8879: Add rsvp filter with tunnel and skp flag
Test 8261: List rsvp filters
Test 8989: Delete rsvp filter
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
