BO validation during vm_bind could trigger memory eviction when
system runs under memory pressure. Right now we blindly evict
BOs of all VMs. This scheme has a problem when system runs in
none recoverable page fault mode: even though the vm_bind could
be successful by evicting BOs, the later the rebinding of the
evicted BOs would fail. So it is better to report an out-of-
memory failure at vm_bind time than at time of rebinding where
xekmd currently doesn't have a good mechanism to report error
to user space.
This patch implemented a scheme to only evict objects of other
VMs during vm_bind time. Object of the same VM will skip eviction.
If we failed to find enough memory for vm_bind, we report error
to user space at vm_bind time.
This scheme is not needed for recoverable page fault mode under
what we can dynamically fault-in pages on demand.
v1: Use xe_vm_in_preempt_fence_mode instead of stack variable (Thomas)
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203021929.1919730-1-oak.zeng@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The state dump on a dead CT incident deliberately disarms itself after
running. This is to prevent a long stream of errors causing continuous
dumps. It was supposed to re-arm itself after a reset, however that
was not happening. The re-arm flag was being set but the worker was
not being run to process that flag. So fix that.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203005949.3947920-1-John.C.Harrison@Intel.com
When probe has an error, the current scheme causes a page fault during
resource unwinding. This happens because GTTMMADR_BAR gets unmapped
before the allocated BO is released via drmm. Switching to a managed BO
that is released via devm solves this ordering issue.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204111655.1293-1-ilia.levi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Let's start using struct intel_display instead of struct drm_i915_private
when introducing new code. No functional changes.
v2: Drop tc_to_intel_display() helper function (Jani)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-3-mika.kahola@intel.com
There is a HW issue that arises when there are race conditions
between TCSS entering/exiting TC7 or TC10 states while the
driver is asserting/deasserting TCSS power request. As a
workaround, Display driver will implement a mailbox sequence
to ensure that the TCSS is in TC0 when TCSS power request is
asserted/deasserted.
The sequence is the following
1. Read mailbox command status and wait until run/busy bit is
clear
2. Write mailbox data value '1' for power request asserting
and '0' for power request deasserting
3. Write mailbox command run/busy bit and command value with 0x1
4. Read mailbox command and wait until run/busy bit is clear
before continuing power request.
v2: Rename WA function (Gustavo)
Limit WA only for PTL platform with a TODO note (Gustavo)
Add TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY for clarity when writing
register data (Gustavo)
Move register defs from i915_reg.h to intel_cx0_phy_regs.h (Gustavo)
v3: Use "struct intel_display" instead of "struct drm_i915_private" (Jani)
Move defs above C10 definitions in the
intel_cx0_phy_regs.h file (Gustavo)
Move drm_WARN_ON() inside WA function (Gustavo)
Rename workaround function as wa_14020908590() (Gustvo)
Use boolean enable instead of if-else structure (Raag)
v4: Drop drm_WARN_ON() (Raag)
Fix function definition to fit into a single line (Raag)
v5: Drop TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY from TCSS_DISP_MAILBOX_IN_CMD_DATA(val)
macro (Jani)
Rename WA function with some meaningful name and add comment
on WA number (Jani)
Use struct intel_display on WA calling function (Jani)
Reviewed-by: Raag Jadav <raag.jadav@intel.com> (v4)
Acked-by: Jani Nikula <jani.nikula@intel.com> (v5)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-2-mika.kahola@intel.com
ttm_bo_access() returns the size on success, account for that otherwise
the caller incorrectly thinks this is an error in
intel_atomic_prepare_plane_clear_colors().
v2 (Thomas)
- Make sure we check for the partial copy case. Also since this api is
easy to get wrong, wrap the whole thing in a new helper to hide the
details and then convert the existing users over.
Fixes: b6308aaa24 ("drm/xe/display: Update intel_bo_read_from_page to use ttm_bo_access")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3661
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202170102.88893-2-matthew.auld@intel.com
When performing a guc_mmio_regset_write, we add all the registers in the
reg_sr list to the save/restore list, but do not do the same for the
nonpriv registers. Add them in.
v2:
- Add all NONPRIV registers to avoid undefined behavior (Harrison)
- s/whitelist/nonpriv
v3:
- Rebase
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2249
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: Lucas de Marchi <lucas.demarchi@intel.com>
CC: Matt Roper <matthew.d.roper@intel.com>
CC: John Harrison <john.c.harrison@intel.com>
CC: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
CC: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241122180826.7075-1-jonathan.cavitt@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The Battlemage (BMG) discrete graphics card supports the Platform,
Monitoring Technology (PMT) feature directly on the primary PCI device.
Utilize the PMT callback API to add support for the BMG devices.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203153639.2982162-1-michael.j.ruhl@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are now multiple places that can trigger a coredump. Some of
which can happen in parallel. There is already a check against
capturing multiple dumps sequentially, but without locking it doesn't
guarantee to work against concurrent dumps. And if two dumps do happen
in parallel, they can end up doing Bad Things such as one call stack
freeing the data the other call stack is still processing. Which leads
to a crashed kernel.
Further, it is possible for the DRM timeout to expire and trigger a
free of the capture while a user is still reading that capture out
through sysfs. Again leading to dodgy pointer problems.
So, add a mutext lock around the capture, read and free functions to
prevent inteference.
v2: Swap tiny scope spin_lock for larger scope mutex and fix
kernel-doc comment (review feedback from Matthew Brost)
v3: Move mutex locks to exclude worker thread and add reclaim
annotation (review feedback from Matthew Brost)
v4: Fix typo.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-4-John.C.Harrison@Intel.com
Adding lockdep checking to the coredump code showed that there was an
existing violation. The dev_coredumpm_timeout() call is used to
register the dump with the base coredump subsystem. However, that
makes multiple memory allocations, only some of which use the GFP_
flags passed in. So that also needs to be deferred to the worker
function where it is safe to allocate with arbitrary flags.
In order to not add protoypes for the callback functions, moving the
_timeout call also means moving the worker thread function to later in
the file.
v2: Rebased after other changes to the worker function.
Fixes: e799485044 ("drm/xe: Introduce the dev_coredump infrastructure.")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-xe@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-3-John.C.Harrison@Intel.com
There are debug level prints giving more information about the cause
of the hang immediately before core dumps are created. However, not
everyone has debug level prints enabled or saves the dmesg log at all.
So include that information in the dump file itself. Also, at least
one of those prints included the pid as well as the process name. So
include that in the capture too.
v2: Fix kvfree vs kfree and missing kernel-doc (review feedback from
Matthew Brost)
v3: Use GFP_ATOMIC instead of GFP_KERNEL.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-2-John.C.Harrison@Intel.com
Fix missing initial value for last_value.
For GuC capture register definition, it is required to define 64bit
register in a pair of 2 consecutive 32bit register entries, low first,
then hi. Add code to check this order.
Changes from prior revs:
v5:- Correct cross-line comment format
v4:- Fix warn on condition and remove skipping
v3:- Move break inside brace
v2:- Correct the fix tag pointed commit
Add examples in comments for warning
Add 1 missing hi condition check
Fixes: ecb6336463 ("drm/xe/guc: Plumb GuC-capture into dev coredump")
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126201052.1937079-1-zhanjun.dong@intel.com
core: add of based component probing
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
Instead of a delicate dance between drivers and device tree quirks, this
change introduces a simple I2C component probe function. For a given
class of devices on the same I2C bus, it will go through all of them,
doing a simple I2C read transfer and see which one of them responds. It
will then enable the device that responds.
-----BEGIN PGP SIGNATURE-----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=MAxU
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
- Remove unused bprintf() function
bprintf() was added with the rest of the "bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0yNShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJ6AP9i8pFOjeMfb2hOBpJTzORkIXEbz5nG
OCK/5aeSdjxy8QEAqafBSr5IQOxaTCFve1p7WSwdgmi2ZLmqEasaud0LmAk=
=5bp1
-----END PGP SIGNATURE-----
Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function __udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
-----BEGIN PGP SIGNATURE-----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=X4bb
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause some
virtual interrupts to get lost
- More platform_driver::remove() conversion
-----BEGIN PGP SIGNATURE-----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=xeni
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
by erratum 1386 so that the matching loop actually terminates instead of
going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the relocatable
kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN has been
disabled
-----BEGIN PGP SIGNATURE-----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=RC2M
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a terminating zero end-element to the array describing AMD CPUs
affected by erratum 1386 so that the matching loop actually
terminates instead of going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the
relocatable kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN
has been disabled
* tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
x86/Documentation: Update algo in init_size description of boot protocol
x86/microcode/AMD: Flush patch buffer mapping after application
x86/mm: Carve out INVLPG inline asm for use by others
x86/cpu: Fix PPIN initialization
The point behind strscpy() was to once and for all avoid all the
problems with 'strncpy()' and later broken "fixed" versions like
strlcpy() that just made things worse.
So strscpy not only guarantees NUL-termination (unlike strncpy), it also
doesn't do unnecessary padding at the destination. But at the same time
also avoids byte-at-a-time reads and writes by _allowing_ some extra NUL
writes - within the size, of course - so that the whole copy can be done
with word operations.
It is also stable in the face of a mutable source string: it explicitly
does not read the source buffer multiple times (so an implementation
using "strnlen()+memcpy()" would be wrong), and does not read the source
buffer past the size (like the mis-design that is strlcpy does).
Finally, the return value is designed to be simple and unambiguous: if
the string cannot be copied fully, it returns an actual negative error,
making error handling clearer and simpler (and the caller already knows
the size of the buffer). Otherwise it returns the string length of the
result.
However, there was one final stability issue that can be important to
callers: the stability of the destination buffer.
In particular, the same way we shouldn't read the source buffer more
than once, we should avoid doing multiple writes to the destination
buffer: first writing a potentially non-terminated string, and then
terminating it with NUL at the end does not result in a stable result
buffer.
Yes, it gives the right result in the end, but if the rule for the
destination buffer was that it is _always_ NUL-terminated even when
accessed concurrently with updates, the final byte of the buffer needs
to always _stay_ as a NUL byte.
[ Note that "final byte is NUL" here is literally about the final byte
in the destination array, not the terminating NUL at the end of the
string itself. There is no attempt to try to make concurrent reads and
writes give any kind of consistent string length or contents, but we
do want to guarantee that there is always at least that final
terminating NUL character at the end of the destination array if it
existed before ]
This is relevant in the kernel for the tsk->comm[] array, for example.
Even without locking (for either readers or writers), we want to know
that while the buffer contents may be garbled, it is always a valid C
string and always has a NUL character at 'comm[TASK_COMM_LEN-1]' (and
never has any "out of thin air" data).
So avoid any "copy possibly non-terminated string, and terminate later"
behavior, and write the destination buffer only once.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa7
("vsprintf: add binary printf") but as far as I can see was never used,
unlike the other two functions in that patch.
Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=bPnr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- When removing a PCI device, only look up and remove a platform device
if there is an associated device node for which there could be a
platform device, to fix a merge window regression (Brian Norris)
* tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctrl: Unregister platform device only if one actually exists
-----BEGIN PGP SIGNATURE-----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=ZCsN
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull ima fix from Paul Moore:
"One small patch to fix a function parameter / local variable naming
snafu that went up to you in the current merge window"
* tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ima: uncover hidden variable in ima_match_rules()
-----BEGIN PGP SIGNATURE-----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=6cbB
-----END PGP SIGNATURE-----
Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
-----BEGIN PGP SIGNATURE-----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=b84h
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
- Remove a leftover struct from when the cqwait registered waiting was
transitioned to regions.
- Fix for an issue introduced in this merge window, where nop->fd might
be used uninitialized. Ensure it's always set.
- Add capping of the task_work run in local task_work mode, to prevent
bursty and long chains from adding too much latency.
- Work around xa_store() leaving ->head non-NULL if it encounters an
allocation error during storing. Just a debug trigger, and can go
away once xa_store() behaves in a more expected way for this
condition. Not a major thing as it basically requires fault injection
to trigger it.
- Fix a few mapping corner cases
- Fix KCSAN complaint on reading the table size post unlock. Again not
a "real" issue, but it's easy to silence by just keeping the reading
inside the lock that protects it.
* tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux:
io_uring/tctx: work around xa_store() allocation error issue
io_uring: fix corner case forgetting to vunmap
io_uring: fix task_work cap overshooting
io_uring: check for overflows in io_pin_pages
io_uring/nop: ensure nop->fd is always initialized
io_uring: limit local tw done
io_uring: add io_local_work_pending()
io_uring/region: return negative -E2BIG in io_create_region()
io_uring: protect register tracing
io_uring: remove io_uring_cqwait_reg_arg
* Fixes.
RISC-V:
* Svade and Svadu (accessed and dirty bit) extension support for host and
guest. This was acked on the mailing list by the RISC-V maintainer, see
https://patchew.org/linux/20240726084931.28924-1-yongxuan.wang@sifive.com/.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmdKS0QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP7hggAmt5CJesFGIuDwQgJX1KuNWAS84AX
Oq5SPZLH0XjE5YDm6AusSzvbtOhRM6mARU5/iqMRE6Mqpf4MXpP9tOo6xaDiL7+m
bOFsDYEO73WQyrIfFUCZ7dXiTbDVtQfNH8Z1yQwHPsa1d+WDYY3tLbCe5qCdqYMF
JDiB7K0cQzPDmhCwf3Zf8mW2ZRI0QsTqiuFUfVGGNgFDspWfBFBqkLCkrMNmbp9z
ye375oKb2VCe6OBJCY+Nl6tdoBUkz+CtZDCxkxuh0Uk4NmsUC9JMye9iwgU9DuI7
nagFuvpUGcgbZvrx1ly47TL+wcEFLwnBJ0xBZTGIgVoZHj/wX9GM+tSgIw==
=semZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
- ARM fixes
- RISC-V Svade and Svadu (accessed and dirty bit) extension support for
host and guest
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test
RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM
dt-bindings: riscv: Add Svade and Svadu Entries
RISC-V: Add Svade and Svadu Extensions Support
KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status
KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure
KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes
KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition
KVM: arm64: vgic: Make vgic_get_irq() more robust
KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
- sh: intc: Fix use-after-free bug in register_intc_controller()
- sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
-----BEGIN PGP SIGNATURE-----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=8ud9
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Two small fixes.
The first one by Huacai Chen addresses a runtime warning when
CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected
which occurs because the cpuinfo code on sh incorrectly uses NR_CPUS
when iterating CPUs instead of the runtime limit nr_cpu_ids.
A second fix by Dan Carpenter fixes a use-after-free bug in
register_intc_controller() which occurred as a result of improper
error handling in the interrupt controller driver code when
registering an interrupt controller during plat_irq_setup() on sh"
* tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: intc: Fix use-after-free bug in register_intc_controller()
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
- Deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE so that tests depending
on it don't run (and fail) on arm64
- Fix lockdep assert in the Arm SMMUv3 PMU driver
- Fix the port and device ID bits setting in the Arm CMN perf driver
-----BEGIN PGP SIGNATURE-----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=ZNzJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE so that tests depending
on it don't run (and fail) on arm64
- Fix lockdep assert in the Arm SMMUv3 PMU driver
- Fix the port and device ID bits setting in the Arm CMN perf driver
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm-cmn: Ensure port and device id bits are set properly
perf/arm-smmuv3: Fix lockdep assert in ->event_init()
arm64: disable ARCH_CORRECT_STACKTRACE_ON_KRETPROBE tests
since 2024.07.26:
assorted minor bug fixes
assorted platform specific tweaks
initial RAPL PSYS (SysWatt) support
Signed-off-by: Len Brown <len.brown@intel.com>
Introduce the counter as a part of global, platform counters structure.
We open the counter for only one cpu, but otherwise treat it as an
ordinary RAPL counter, allowing for grouped perf read.
The counter is disabled by default, because it's interpretation may
require additional, platform specific information, making it unsuitable
for general use.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add '+' to optstring when early scanning for --no-msr and --no-perf.
It causes option processing to stop as soon as a nonoption argument is
encountered, effectively skipping child's arguments.
Fixes: 3e4048466c ("tools/power turbostat: Add --no-msr option")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Force the --no-perf early to prevent using it as a source. User asks for
raw values, but perf returns them relative to the opening of the file
descriptor.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
On some machines, the graphics device is enumerated as
/sys/class/drm/card1 instead of /sys/class/drm/card0. The current
implementation does not handle this scenario, resulting in the loss of
graphics C6 residency and frequency information.
Add support for /sys/class/drm/card1, ensuring that turbostat can
retrieve and display the graphics columns for these platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Snapshots of the graphics sysfs knobs are taken based on file
descriptors. To optimize this process, open the files and cache the file
descriptors during the graphics probe phase. As a result, the previously
cached pathnames become redundant and are removed.
This change aims to streamline the code without altering its functionality.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, there is an inconsistency in how graphics sysfs knobs are
accessed: graphics residency sysfs knobs are opened and closed for each
read, while graphics frequency sysfs knobs are opened once and remain
open until turbostat exits. This inconsistency is confusing and adds
unnecessary code complexity.
Consolidate the access method by opening the sysfs files once and
reusing the file pointers for subsequent accesses. This approach
simplifies the code and ensures a consistent method for accessing
graphics sysfs knobs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The graphics sysfs knobs are read-only, making the use of fflush()
before reading them redundant.
Remove the unnecessary fflush() call.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In various generations, platforms often share a majority of features,
diverging only in a few specific aspects. The current approach of using
hardcoded values in 'platform_features' structure fails to effectively
represent these divergences.
To improve the description of platform divergence:
1. Each newly introduced 'platform_features' structure must have a base,
typically derived from the previous generation.
2. Platform feature values should be inherited from the base structure
rather than being hardcoded.
This approach ensures a more accurate and maintainable representation of
platform-specific features across different generations.
Converts `adl_features` and `lnl_features` to follow this new scheme.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for GraniteRapids-D. It shares the same features
with SapphireRapids.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Lunarlake supports CC1/CC6/CC7/PC2/PC6/PC10.
Remove PC3 support on Lunarlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As ARL shares the same features with ADL/RPL/MTL, now 'arl_features' is
used by Lunarlake platform only.
Rename 'arl_features' to 'lnl_features'.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Similar to ADL/RPL/MTL, ARL supports CC1/CC6/CC7/PC2/PC3/PC6/PC8/PC10.
Add back PC8 support on Arrowlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Similar to ADL/RPL, MTL support CC1/CC6/CC7/PC2/PC3/PC6/PC8/CP10.
Remove PC7/PC9 support on MTL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Honor --show CPU and --show Core when "topo.num_cpus == 1".
Previously turbostat assumed that on a 1-CPU system, these
columns should never appear.
Honoring these flags makes it easier for several programs
that parse turbostat output.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
parse_cpu_string() parses the string input either from command line or
from /sys/fs/cgroup/cpuset.cpus.effective to get a list of CPUs that
turbostat can run with.
The cpu string returned by /sys/fs/cgroup/cpuset.cpus.effective contains
a trailing '\n', but strtoul() fails to treat this as an error.
That says, for the code below
val = ("\n", NULL, 10);
val returns 0, and errno is also not set.
As a result, CPU0 is erroneously considered as allowed CPU and this
causes failures when turbostat tries to run on CPU0.
get_counters: Could not migrate to CPU 0
...
turbostat: re-initialized with num_cpus 8, allowed_cpus 5
get_counters: Could not migrate to CPU 0
Add a check to return immediately if '\n' or '\0' is detected.
Fixes: 8c3dd2c9e5 ("tools/power/turbostat: Abstrct function for parsing cpu string")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
