Do not reference the loop variable job after the loop has exited.
Instead, save the job from the last iteration of the loop.
Fixes: 00937fe192 ("drm/xe/vf: Start re-emission from first unsignaled job during VF migration")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202511291102.jnnKP6IB-lkp@intel.com/
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251203011809.968893-1-matthew.brost@intel.com
xe_sync_in_fence_get() uses the same kind of mismatched fence array
allocation vs looping logic that was previously noted and changed by
commit 0a4c2ddc71 ("drm/xe/vm: Use for_each_tlb_inval() to calculate
invalidation fences"). As with that commit, the mismatch doesn't cause
any problem at the moment since for_each_tlb_inval() loops the same
number of times as XE_MAX_GT_PER_TILE (2). However we don't want to
assume that these will always be the same in the future, so switch to
using for_each_tlb_inval() in both places to future-proof the code.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251202222551.1858930-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Backmerging to bring in a needed dependency for the Xe VFIO
driver variant. This should ideally have been done before we
commited that, so we now have a small window in drm-xe-next
where that driver doesn't compile.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512030331.I8CveRre-lkp@intel.com/
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Skipping power ungate exposed some scenarios that will fail
like below:
```
amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n
amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed
...
amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout!
```
The underlying s2idle issue that prompted this commit is going to
be fixed in BIOS.
This reverts commit 2a6c826cfe.
Fixes: 2a6c826cfe ("drm/amd: Skip power ungate during suspend for VPE")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Konstantin <answer2019@yandex.ru>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use common definitions for the fault bits in the IH sourc
data for the gmc9-12 memory hub faults
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to call amdgpu_vm_handle_fault() on page fault
on all gfx9 and newer parts to properly update the
page tables, not just for recoverable page faults.
Cc: stable@vger.kernel.org
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to call amdgpu_vm_handle_fault() on page fault
on all gfx9 and newer parts to properly update the
page tables, not just for recoverable page faults.
Cc: stable@vger.kernel.org
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mfd_add_hotplug_devices() assigns child platform devices with
PLATFORM_DEVID_AUTO, but the ACP machine drivers expect the platform
device names to never change. Use mfd_add_devices() instead and give
each cell a unique id.
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise userspace may be fooled into believing it has a reserved VMID
when in reality it doesn't, ultimately leading to GPU hangs when SPM is
used.
Fixes: 80e709ee6e ("drm/amdgpu: add option params to enforce process isolation between graphics and compute")
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call amdgpu_vm_update_fault_cache on GMC v6 similarly to how we
do in GMC v7-v8 so that VM fault info can be used later by
userspace for debugging.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VM_CONTEXT1_PROTECTION_FAULT_MCCLIENT register
doesn't exist on GMC v6 so we can't print the MC client as a
string like we do on GMC v7-v8. However, we still print the
mc_id from VM_CONTEXT1_PROTECTION_FAULT_STATUS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v7 (CIK)
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v6 (SI)
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a typo in a comment, change "enviroment" to "environment" in
drivers/gpu/drm/amd/display/dc/dml2/display_mode_core_structs.h
Fixes: e6a8a000cf ("drm/amd/display: Rename dml2 to dml2_0 folder")
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aditya Gollamudi <adigollamudi@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW]
Before enable smart power OLED, we need to call set pipe to let
DMUB get correct ABM config.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
DVI-A & VGA connectors are applicable to DCE ASICs, so move them to
dce110_hwseq.c to block audio sync on SIGNAL_TYPE_RGB for DCE ASICs.
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users of ttm entities need to hold the gtt_window_lock before using them
to guarantee proper ordering of jobs.
Cc: stable@vger.kernel.org
Fixes: cb5cc4f573 ("drm/amdgpu: improve debug VRAM access performance using sdma")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch runtime PM code to use scope-based forcewake for consistency with
other parts of the driver.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251128082212.294592-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
VF migration sends a marker to the GUC before resource fixups begin,
and repeats the marker with the RESFIX_DONE notification. This prevents
the GUC from submitting jobs during double migration events.
To reliably test double migration, a second migration must be triggered
while fixups from the first migration are still in progress. Since fixups
complete quickly, reproducing this scenario is difficult. Introduce
debugfs controls to add delays in the post-fixup phase, creating a
deterministic window for subsequent migrations.
New debugfs entries:
/sys/kernel/debug/dri/BDF/
├── tile0
│ ├─gt0
│ │ ├──vf
│ │ │ ├── resfix_stoppers
resfix_stoppers: Predefined checkpoints that allow the migration process
to pause at specific stages. The stages are given below.
VF_MIGRATION_WAIT_RESFIX_START - BIT(0)
VF_MIGRATION_WAIT_FIXUPS - BIT(1)
VF_MIGRATION_WAIT_RESTART_JOBS - BIT(2)
VF_MIGRATION_WAIT_RESFIX_DONE - BIT(3)
Each state will pause with a 1-second delay per iteration, continuing until
its corresponding bit is cleared.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Acked-by: Adam Miszczak <adam.miszczak@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-10-satyanarayana.k.v.p@intel.com
Handle GuC response `XE_GUC_RESPONSE_VF_MIGRATED` as a special case in the
VF post-migration recovery flow. When this error occurs, it indicates that
a new migration was detected while the resource fixup process was still in
progress. Instead of failing immediately, requeue the VF into the recovery
path to allow proper handling of the new migration event.
This improves robustness of VF recovery in SR-IOV environments where
migrations can overlap with resource fixup steps.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-9-satyanarayana.k.v.p@intel.com
In scenarios involving double migration, the VF KMD may encounter
situations where it is instructed to re-migrate before having the
opportunity to send RESFIX_DONE for the initial migration. This can occur
when the fix-up for the prior migration is still underway, but the VF KMD
is migrated again.
Consequently, this may lead to the possibility of sending two migration
notifications (i.e., pending fix-up for the first migration and a second
notification for the new migration). Upon receiving the first RES_FIX
notification, the GuC will resume VF submission on the GPU, potentially
resulting in undefined behavior, such as system hangs or crashes.
To avoid this, post migration, a marker is sent to the GUC prior to the
start of resource fixups to indicate start of resource fixups. The same
marker is sent along with RESFIX_DONE notification so that GUC can avoid
submitting jobs to HW in case of double migration.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-8-satyanarayana.k.v.p@intel.com
Enable VF migration starting with GuC 70.54.0 (compatibility version
1.27.0) which supports additional VF2GUC_RESFIX_START message required
to handle migration recovery in a more robust way.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-7-satyanarayana.k.v.p@intel.com
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
-----BEGIN PGP SIGNATURE-----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=QBjM
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2025-12-01-1' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
As I'm leaving Intel soon, drop myself from the list of Xe maintainers.
Also update the mailmap to switch to my kernel.org address.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251126224357.2482051-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE which sets the exec
queue default state to user data passed in. The intent is for a Mesa
tool to use this replay GPU hangs.
v2:
- Enable the flag DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE
- Fix the page size math calculation to avoid a crash
v4:
- Use vmemdup_user (Maarten)
- Copy default state first into LRC, then replay state (Testing, Carlos)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-10-matthew.brost@intel.com
Add replay_offset and replay_length lines to LRC HWCTX snapshot with the
idea being this information can be used extract the data which needs to
be pass to exec queue extension DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE
so GPU hang can be replayed via a Mesa tool.
The additional lines look like:
[HWCTX].replay_offset: 0x%x
[HWCTX].replay_length: 0x%x
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-9-matthew.brost@intel.com
Add DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE which accepts a user pointer
to populate the exec queue state so that a GPU hang can be replayed via
a Mesa tool.
v2: Update the value for HANG_REPLAY_STATE flag
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Carlos Santa <carlos.santa@intel-corp-partner.google.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-8-matthew.brost@intel.com
Add VM.uapi_flags to VM snapshot capture VM snapshot capture. This is
useful information for debug and will help build a robust GPU hang
replay tool.
The current format is:
VM.uapi_flags: 0x%x
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-7-matthew.brost@intel.com
Add CPU caching to properties line in VM snapshot capture indicating
the BO caching properites. This is useful information for debug and
will help build a robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>|mem_region=0x%x|pat_index=%d|cpu_caching=%d
Permissions has two options, either "read_only" or "read_write".
Type has three options, either "userptr", "null_sparse", or "bo".
Memory region is a bit mask of where the memory is located.
Pat index corresponds to the value setup upon VM bind.
CPU caching corresponds to the value of BO setup upon creation.
v2:
- Save off cpu_caching value rather than looking at BO (Carlos)
v4:
- Fix NULL ptr dereference (Carlos)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-6-matthew.brost@intel.com
Add pat index to properties line in VM snapshot capture indicating
the VMA caching properites. This is useful information for debug and
will help build a robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>|mem_region=0x%x|pat_index=%d
Permissions has two options, either "read_only" or "read_write".
Type has three options, either "userptr", "null_sparse", or "bo".
Memory region is a bit mask of where the memory is located.
Pat index corresponds to the value setup upon VM bind.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-5-matthew.brost@intel.com
Add memory region to properties line in VM snapshot capture indicating
where the memory is located. The memory region corresponds to regions in
the uAPI. This is useful information for debug and will help build a
robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>|mem_region=0x%x
Permissions has two options, either "read_only" or "read_write".
Type has three options, either "userptr", "null_sparse", or "bo".
Memory region is a bit mask of where the memory is located.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-4-matthew.brost@intel.com
Add "null_sparse" type to VM snap properties indicating the VMA reads
zero and writes are droppped. This is useful information for debug and
will help build a robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>
Permissions has two options, either "read_only" or "read_write".
Type has three options, either "userptr", "null_sparse", or "bo".
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-3-matthew.brost@intel.com
Add properties line to VM snapshot capture which includes additional
information about VMA being dumped. This is helpful for debug purposes
but also to build a robust GPU hang replay tool.
The current format is:
[<vma address>]: <permissions>|<type>
Permissions has two options, either "read_only" or "read_write".
Type has two options, either "userptr" or "bo".
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-2-matthew.brost@intel.com
Wa_14020316580 was getting clobbered by power gating init code
later in the driver load sequence. Move the Wa so that
it applies correctly.
Fixes: 7cd05ef89c ("drm/xe/xe2hpm: Add initial set of workarounds")
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251129052548.70766-1-vinay.belgaumkar@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Ensure gt->freq is released when sysfs_create_files() fails
in xe_gt_freq_init(). Without this, the kobject would leak.
Add kobject_put() before returning the error.
Fixes: fdc81c43f0 ("drm/xe: use devm_add_action_or_reset() helper")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Alex Zuo <alex.zuo@intel.com>
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20251114205638.2184529-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Applied Wa_16028005424 to Graphics version from 30.00 to 30.05
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20251121100822.20076-2-balasubramani.vivekanandan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
In addition to generic VFIO PCI functionality, the driver implements
VFIO migration uAPI, allowing userspace to enable migration for Intel
Graphics SR-IOV Virtual Functions.
The driver binds to VF device and uses API exposed by Xe driver to
transfer the VF migration data under the control of PF device.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Link: https://patch.msgid.link/20251127093934.1462188-5-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Device specific VFIO driver variant for Xe will implement VF migration.
Export everything that's needed for migration ops.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-4-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
In certain scenarios (such as VF migration), VF driver needs to interact
with PF driver.
Add a helper to allow VF driver access to PF xe_device.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-3-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
All of the necessary building blocks are now in place to support SR-IOV
VF migration.
Flip the enable/disable logic to match VF code and disable the feature
only for platforms that don't meet the necessary prerequisites.
To allow more testing and experiments, on DEBUG builds any missing
prerequisites will be ignored.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-2-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
- Restrict the pointer size of flush pages to prevent a regression.
-----BEGIN PGP SIGNATURE-----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=9d7X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2025-11-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next-fixes for v6.19:
- Restrict the pointer size of flush pages to prevent a regression.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/0090a4fc-9cc4-4c03-bfe5-d1b1f0cc7e05@linux.intel.com
