The patch 15a6af94a2 ("spi: Increase imx51 ecspi burst length based
on transfer length") increased the burst length calculation in
mx51_ecspi_prepare_transfer() to be based on the transfer length.
This breaks HW CS + SPI_CS_WORD support which was added in
6e95b23a5b ("spi: imx: Implement support for CS_WORD") and transfers
with bits-per-word != 8, 16, 32.
SPI_CS_WORD means the CS should be toggled after each word. The
implementation in the imx-spi driver relies on the fact that the HW CS
is toggled automatically by the controller after each burst length
number of bits. Setting the burst length to the number of bits of the
_whole_ message breaks this use case.
Further the patch 15a6af94a2 ("spi: Increase imx51 ecspi burst
length based on transfer length") claims to optimize the transfers.
But even without this patch, on modern spi-imx controllers with
"dynamic_burst = true" (imx51, imx6 and newer), the transfers are
already optimized, i.e. the burst length is dynamically adjusted in
spi_imx_push() to avoid the pause between the SPI bursts. This has
been confirmed by a scope measurement on an imx6d.
Subsequent Patches tried to fix these and other problems:
- 5f66db08cb ("spi: imx: Take in account bits per word instead of assuming 8-bits")
- e9b220aeac ("spi: spi-imx: correctly configure burst length when using dma")
- c712c05e46 ("spi: imx: fix the burst length at DMA mode and CPU mode")
- cf6d79a0f5 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
but the HW CS + SPI_CS_WORD use case is still broken.
To fix the problems revert the burst size calculation in
mx51_ecspi_prepare_transfer() back to the original form, before
15a6af94a2 ("spi: Increase imx51 ecspi burst length based on
transfer length") was applied.
Cc: Stefan Moring <stefan.moring@technolution.nl>
Cc: Stefan Bigler <linux@bigler.io>
Cc: Clark Wang <xiaoning.wang@nxp.com>
Cc: Carlos Song <carlos.song@nxp.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Thorsten Scherer <T.Scherer@eckelmann.de>
Fixes: 15a6af94a2 ("spi: Increase imx51 ecspi burst length based on transfer length")
Fixes: 5f66db08cb ("spi: imx: Take in account bits per word instead of assuming 8-bits")
Fixes: e9b220aeac ("spi: spi-imx: correctly configure burst length when using dma")
Fixes: c712c05e46 ("spi: imx: fix the burst length at DMA mode and CPU mode")
Fixes: cf6d79a0f5 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
Link: https://lore.kernel.org/all/20240618-oxpecker-of-ideal-mastery-db59f8-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://msgid.link/r/20240618-spi-imx-fix-bustlength-v1-1-2053dd5fdf87@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When spi-cadence is configured as a slave, it requires the SPI refclk to
detect the synchronization start condition while communicating with the
master. However, the spi-cadence driver never enables the SPI refclk in
slave mode, causing the refclk to remain disabled if the
"clk_ignore_unused" kernel parameter is not passed through bootargs.
As a result, the slave cannot detect data sent by the master, leading to
communication failure. Update driver to enable the SPI refclk in both
master and slave configurations.
Fixes: b1b90514ea ("spi: spi-cadence: Add support for Slave mode")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://msgid.link/r/20240617153837.29861-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While adding a SPI device, the SPI core ensures that multiple logical CS
doesn't map to the same physical CS. For example, spi->chip_select[0] !=
spi->chip_select[1] and so forth. However, unlike the SPI master, the SPI
slave doesn't have the list of chip selects, this leads to probe failure
when the SPI controller is configured as slave. Update the
__spi_add_device() function to perform this check only if the SPI
controller is configured as master.
Fixes: 4d8ff6b099 ("spi: Add multi-cs memories support in SPI core")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://msgid.link/r/20240617153052.26636-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor accessing the SDCA extension properties to make it easier to
access multiple properties to assist with future features. Return the
node itself and allow the caller to read the actual properties.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240611132556.1557075-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case usage of OCTAL mode, buswidth parameter can take the value 8.
As return value of stm32_qspi_get_mode() is used to configure fields
of CCR registers that are 2 bits only (fields IMODE, ADMODE, ADSIZE,
DMODE), clamp return value of stm32_qspi_get_mode() to 4.
Fixes: a557fca630 ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-3-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Misplaced parenthesis make test of mode wrong in case mode is equal to
SPI_TX_OCTAL or SPI_RX_OCTAL.
Simplify this sanity test, if one of this bit is set, property
cs-gpio must be present in DT.
Fixes: a557fca630 ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add spicc loopback mode for debugging convenience.
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240612-spi_lbc-v1-1-d52e8c8011bd@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
The first part of the series (patches 1 to 7) is an introduction
of a new helper followed by the user conversion.
This consolidates the same code and also makes patch 8 (last one)
be localised to the SPI core part.
The last patch is the main rework to get rid of a recently introduced
hack with a dummy SG list and move to the transfer-based DMA mapped
flag.
That said, the patches 1 to 7 may be applied right away since they
have no functional change intended, while the last one needs more
testing and reviewing.
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-altera-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-fsl-lib.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-omap2-mcspi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-qup.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240609-md-drivers-spi-v1-1-1c7444f53cde@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SPI clock flag CLK_SET_RATE_PARENT for using pclk as parent clock.
This gives SPI more flexibility in frequency selection.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Link: https://lore.kernel.org/r/20240524-spi_pclk_setparent-v1-1-99e0ce70b66f@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The granularity of DMA mappings is transfer and moreover,
the direction is also important as it can be unidirect.
The current cur_msg_mapped flag doesn't fit well the DMA mapping
and syncing calls and we have tons of checks around on top of it.
So, instead of doing that rework the code to use per transfer per
direction flag to show if it's DMA mapped or not.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-9-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-8-andriy.shevchenko@linux.intel.com
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-7-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-6-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-5-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-3-andriy.shevchenko@linux.intel.com
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are few drivers that use the same pattern to check if the transfer
is DMA mapped or not. Provide a helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some internals of the cs35l56 can only support SPI speeds of up to
11MHz. Whilst some use-cases could support higher rates, keep things
simple by dropping the SPI speed down to this avoid any potential
issues.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240607103423.4159834-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we ever meet a hardware that uses weird register bits and padding,
we may end up in off-by-one error since x/8 + y/8 might not be equal
to (x + y)/8 in some cases.
bits pad x/8+y/8 (x+y)/8
4..7 0..3 0 0 // x + y from 4 up to 7
4..7 4..7 0 1 // x + y from 8 up to 11
4..7 8..11 1 1 // x + y from 12 up to 15
8..15 0..7 1 1 // x + y from 8 up to 15
8..15 8..15 2 2 // x + y from 16 up to 23
Fix this by using (x+y)/8.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://msgid.link/r/20240605205315.19132-1-andy.shevchenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The root clock is actually 49.152MHz not 40MHz, as it is derived from
the primary audio clock, update the driver to match. This error can
cause the actual clock rate to be higher than the requested clock rate
on the SPI bus.
Fixes: ef75e76716 ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604131704.3227500-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The spi-pxa2xx.c is bloated with a platform driver code while
pretending to provide a core functionality. Make it real core
library by splitting out the platform driver to a separate file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation of the extracting platform driver from spi-pxa2xx.c
split the probe and remove functions so we have bus independent
and platform device ones.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pxa2xx_spi_fw_translate_cs() checks for the ACPI companion device
presence along with the SSP type. But the SSP type is uniquely
determines the case. Hence remove the superflous check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mmio_base can't be NULL at this point. It's either checked
in both pxa_ssp_probe() and pxa2xx_spi_init_ssp() or correctly
provided by PCI core. Hence, remove duplicate check which is
a dead code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Print DMA burst size only when DMA is enabled to avoid making
a false impression that DMA is enabled when it may be not.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the ACPI enumerated devices provide a property with SSP type,
there is no more necessity to bear the copy of them in the ID table.
Drop the driver data in ACPI ID table.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old Intel platforms, such as Intel Braswell, also provide
the property of SSP type. Reorganize the pxa2xx_spi_init_pdata()
to take that into account.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the error path or remove path the reference counter in PXA SSP driver
may be dropped before the other resources, that were allocated after
bumbing the reference counter. This breaks reversed order of freeing and
might have an undesired side effects. Prevent this from happening by
wrapping pxa_ssp_request() to be device managed resource.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZc9egeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGoLsH/0xo1TNZwNRE9Qux
gFbJDDhxMtvWnJCSqUuhpypd7SoVVEVKiXW942gWTl97PlCEH0ov3p+0UbxnmG13
kKJT1C/gct95L03OAfGquIjBSWh4/55o6Vz1zYTGvTFpWZo7G3ZvCDY8o9kN5/L3
mnpC+GfzZ9ckg+2TfwlbGBQUtILHV3IipCbfDFPSrT8mS0IT67uvBlND3nI++woj
J1znGqg1PQ6yFnFCfj4RYCiyv/jEAT0ZTyokO4rH+iQVufc3y02mokhMuqmSoE6T
5bbHToLZIaa/QjRamN/+ltwyrhv8WlX4rJOkMibJY6w8gpukt/k6gL2Pguk4y2pf
0FPbbC0=
=0AGs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZdsDsACgkQJNaLcl1U
h9B5bgf+K3H6WnMn+2TsKE7TBRW8D8J1FJdYDcJ5CoM/tw10YqgNHIvrZXvikLQG
Di3jM3SIFTWn2R350PBx+z+05o3vjVKWpH1bi/EPCCfKl80vyOaMFDZYL7jRxBBl
x3dzqsn//U13U2mdVQ0d1plxtCBqzy8v1nDq+9KNog1gjfTLFQ2Aa+++oZkoDqo4
TJgqBAAzmynDawEhZ7WKdAb6Wb/AEyvWGgfudE+N2Qs3NZt2tbnD2KH23e8SF3ZN
J3CiL6JPSuI2fAW8+zlZdmQRf/pEZFXxebnKc7fyDglqmzU4Pw4IIt/xIfuFMDBA
eEPZ+gaeBV2jjPsqXb1gxD3hqCMYeQ==
=qq1C
-----END PGP SIGNATURE-----
spi: Merge up fixes
We need these to get the i.MX8 boards working in CI again.
- Add a quirk for three different devices that have shown issues with
LPM (link power management). These devices appear to not implement LPM
properly, since we see command timeouts when enabling LPM. The quirk
disables LPM for these problematic devices. (Me)
- Do not apply the Intel PCS quirk on Alder Lake. The quirk is not needed
and was originally added by mistake when LPM support was enabled for
this AHCI controller. Enabling the quirk when not needed causes the
the controller to not be able to detect the connected devices on some
platforms.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZlysHgAKCRDJZDGjmcZN
cvkSAQDspGtT4H0/p71vJYJc3bUqO4xlYmPwDgBcfnlnrwZfBQD+PCNOoICzmooP
FMogHvsOQ2IsLKNX4iUX3dVtG9gMsQ4=
=J6zx
-----END PGP SIGNATURE-----
Merge tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add a quirk for three different devices that have shown issues with
LPM (link power management). These devices appear to not implement
LPM properly, since we see command timeouts when enabling LPM. The
quirk disables LPM for these problematic devices. (Me)
- Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
needed and was originally added by mistake when LPM support was
enabled for this AHCI controller. Enabling the quirk when not needed
causes the the controller to not be able to detect the connected
devices on some platforms.
* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
- Fix topology parsing regression on older CPUs in the
new AMD/Hygon parser
- Fix boot crash on odd Intel Quark and similar CPUs that
do not fill out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result. Provide
32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the
BIOS locks certain CPUID leaves and the kernel unlocked
them late, which broke with the new topology parsing code.
Factor out this unlocking logic and move it earlier
in the parsing sequence.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ugOt
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous topology parsing fixes:
- Fix topology parsing regression on older CPUs in the new AMD/Hygon
parser
- Fix boot crash on odd Intel Quark and similar CPUs that do not fill
out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result.
Provide 32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the BIOS locks
certain CPUID leaves and the kernel unlocked them late, which broke
with the new topology parsing code. Factor out this unlocking logic
and move it earlier in the parsing sequence"
* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/intel: Unlock CPUID before evaluating anything
x86/cpu: Provide default cache line size if not enumerated
x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tTwc
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Export a symbol to make life easier for instrumentation/debugging"
* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/x86: Export 'percpu arch_freq_scale'
- Enforce full ordering for ATOMIC operations with BPF_FETCH.
- Fix uaccess build errors seen with GCC 13/14.
- Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT.
- Drop error message from lparcfg guest name lookup.
Thanks to: Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao, Puranjay
Mohan, Samuel Holland.
-----BEGIN PGP SIGNATURE-----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=TwDx
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Enforce full ordering for ATOMIC operations with BPF_FETCH
- Fix uaccess build errors seen with GCC 13/14
- Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT
- Drop error message from lparcfg guest name lookup
Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.
* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
powerpc/uaccess: Use YZ asm constraint for ld
powerpc/uaccess: Fix build errors seen with GCC 13/14
powerpc/pseries/lparcfg: drop error message from guest name lookup
powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
After merging a commit 1fffe7a34c ("script: modpost: emit a warning when
the description is missing"), MODULE_DESCRIPTOR seems to be mandatory for
kernel modules. In FireWire subsystem, the most of practical kernel modules
have the field, while KUnit test modules do not. A single patch is applied
to fix them.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZluw+AAKCRCsLtaWM8Lw
E9ZFAP0VkxcIcis4hY5z27Oj5Al7bg1+TrnGSuju82mqDapHqQD9Gp8x5Xz+5Bme
qM9edRRoR7iGlzTrEYv4FULVkdU1Vg4=
=Mo99
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"After merging a commit 1fffe7a34c ("script: modpost: emit a warning
when the description is missing"), MODULE_DESCRIPTOR seems to be
mandatory for kernel modules. In FireWire subsystem, the most of
practical kernel modules have the field, while KUnit test modules do
not. A single patch is applied to fix them"
* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: add missing MODULE_DESCRIPTION() to test modules
-----BEGIN PGP SIGNATURE-----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=o/Xa
-----END PGP SIGNATURE-----
Merge tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Two small smb3 fixes:
- Fix socket creation with sfu mount option (spotted by test generic/423)
- Minor cleanup: fix missing description in two files"
* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix creating sockets when using sfu mount options
fs: smb: common: add missing MODULE_DESCRIPTION() macros
* Fix a livelock by dropping an xfarray sortinfo folio when an error is
encountered.
* During extended attribute operations, Initialize transaction reservation
computation based on attribute operation code.
* Relax symbolic link's ondisk verification code to allow symbolic links
with short remote targets.
* Prevent soft lockups when unmapping file ranges and also during remapping
blocks during a reflink operation.
* Fix compilation warnings when XFS is built with W=1 option.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZlbRngAKCRAH7y4RirJu
9DFfAP0aQYHIGOUx6YCvucoLtIRWYqaxDvgWPjLrtaeiUSmY7AEA1M4BVl/2Svkj
hgs1/qqU8WGze/KqdG/aJbJS0ZqJKAU=
=gxY4
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Fix a livelock by dropping an xfarray sortinfo folio when an error
is encountered
- During extended attribute operations, Initialize transaction
reservation computation based on attribute operation code
- Relax symbolic link's ondisk verification code to allow symbolic
links with short remote targets
- Prevent soft lockups when unmapping file ranges and also during
remapping blocks during a reflink operation
- Fix compilation warnings when XFS is built with W=1 option
* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add cond_resched to block unmap range and reflink remap path
xfs: don't open-code u64_to_user_ptr
xfs: allow symlinks with short remote targets
xfs: fix xfs_init_attr_trans not handling explicit operation codes
xfs: drop xfarray sortinfo folio on error
xfs: Stop using __maybe_unused in xfs_alloc.c
xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
Here is a single revert for a much-reported regression in 6.10-rc1 when
it comes to a few older architectures. Turns out that the VT ioctls
don't work the same across all cpu types because of some old
compatibility requrements for stuff like alpha and powerpc. So revert
the change that attempted to have them use the _IO() macros and go back
to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZlq8nA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk+DwCglMTNzLC9AXBLTMK+altLzlzPJ6oAn0QbNe8s
6o8/G2XSYilmnRAZvoNS
=b7pn
-----END PGP SIGNATURE-----
Merge tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single revert for a much-reported regression in 6.10-rc1
when it comes to a few older architectures.
Turns out that the VT ioctls don't work the same across all cpu types
because of some old compatibility requrements for stuff like alpha and
powerpc. So revert the change that attempted to have them use the
_IO() macros and go back to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1"
* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "VT: Use macros to define ioctls"
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZlntgBAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbShXAA/3ecCnZWTkgHKSKQiS+t1nUkQmAgZ1Zzmm6v
UaJDCOBnAP9nAEfgEgMHZO1LVL38N6EWzexjnglFkZFHpT8gFwKtCw==
=R5nh
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
