npc_cn20k_apply_custom_kpu() overwrites KPU profile entries with custom
firmware values and then calls npc_cn20k_update_action_entries_n_flags()
over all entries. Since the same function already ran during default
profile initialisation, entries not overridden by the custom firmware
get their flags translated twice, corrupting the CN20K-specific values.
Fix this by extracting the per-entry translation into a helper
npc_cn20k_translate_action_flags() and calling it as each custom entry
is loaded, removing the redundant batch call at the end.
Fixes: ef992a0f12 ("octeontx2-af: npc: cn20k: MKEX profile support")
Cc: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260608095455.1499203-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Rg2q
-----END PGP SIGNATURE-----
Merge tag 'nf-26-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Revalidate bridge ports, add missing NULL checks to fetch the bridge
device by the port. From Florian Westphal.
2) Fix netdevice refcount leak in the error path of nft_fwd hardware
offload function, also from Florian.
3) Unregister helper expectfn callback on conntrack helper module
removal, otherwise dangling pointer remains in place,
from Weiming Shi.
4) Fix possible pointer infoleak in getsockopt() IPT_SO_GET_ENTRIES,
From Kyle Zeng.
5) Validate that device MAC header is present before nf_syslog
accesses it. From Xiang Mei.
6-8) Three patches to address a possible infoleak of stale stack
data in three nf_tables expressions, due to mismatch in the
_init() and _eval() function which is possible since 14fb07130c.
From Davide Ornaghi and Florian Westphal.
netfilter pull request 26-06-10
* tag 'nf-26-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
====================
Link: https://patch.msgid.link/20260610161629.214092-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vhay
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-06-10
1) xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
Propagate SKBFL_SHARED_FRAG when paged fragments are moved between
skbs so ESP can decide whether in-place crypto is safe.
2) xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
Replace the unlocked read of xtfs->ra_newskb with a local flag so a
concurrent reassembly can no longer free first_skb between
spin_unlock and the post-loop check.
3) xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Prune the inexact bin under xfrm_policy_lock so a concurrent
xfrm_hash_rebuild() can no longer free it before xfrm_policy_kill()
dereferences it.
4) xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
Move hrtimer_cancel() for the output and drop timers ahead of their
spinlocks, breaking the softirq/lock cycle that could deadlock
against the timer callbacks on SMP.
5) xfrm: espintcp: do not reuse an in-progress partial send
Fail a new send when espintcp_push_msgs() returns with emsg->len
still set, so a blocking caller can no longer overwrite ctx->partial
while a previous transfer still owns it.
6) esp: fix page frag reference leak on skb_to_sgvec failure
Add a flag to esp_ssg_unref() to unconditionally unref the source
scatterlist, releasing the old page references that are otherwise
leaked when the second skb_to_sgvec() in esp_output_tail() fails.
Please pull or let me know if there are problems.
ipsec-2026-06-10
* tag 'ipsec-2026-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: espintcp: do not reuse an in-progress partial send
xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
====================
Link: https://patch.msgid.link/20260610140800.2562818-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
addrconf_get_prefix_route() can return the fib6_null_entry sentinel
entry which has a NULL fib6_table pointer. Therefore, before setting the
route's expiration time, check that we are not working with this entry,
as otherwise a NPD will be triggered [1].
Note that the other callers of addrconf_get_prefix_route() are not
susceptible to this bug:
1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF |
RTF_PREFIX_RT' flags which are not set on fib6_null_entry.
2. modify_prefix_route(): Fixed by commit a747e02430 ("ipv6: avoid
possible NULL deref in modify_prefix_route()").
3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for
fib6_null_entry and returns an error.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[...]
Call Trace:
<TASK>
__kasan_check_byte (mm/kasan/common.c:573)
lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1))
_raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1))
cleanup_prefix_route (net/ipv6/addrconf.c:1280)
ipv6_del_addr (net/ipv6/addrconf.c:1342)
inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119)
inet6_rtm_deladdr (net/ipv6/addrconf.c:4812)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6997)
netlink_rcv_skb (net/netlink/af_netlink.c:2555)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1899)
__sock_sendmsg (net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Fixes: 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list of routes.")
Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Reviewed-by: David Ahern <dahern@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609145448.768318-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiawen Wu says:
====================
net: txgbe: fix module identification
For AML devices, there are some issues where the wrong module
indentified then configure PHY failed.
The module info buffers should be initialized to 0 before the firmware
returns information. And DECLARE_PHY_INTERFACE_MASK() does not guarantee
zeroed contents, so explicitly clear the temporary interface masks before
setting supported interfaces.
Rework txgbe_identify_module() to validate module identifiers through
explicit type checks instead of relying on transceiver_type heuristics.
When using the SFP module, transceiver_type could be a random value,
because it was read from an invalid register.
====================
Link: https://patch.msgid.link/20260608070842.36504-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DECLARE_PHY_INTERFACE_MASK() does not guarantee zeroed contents. Add a
new macro DECLARE_PHY_INTERFACE_MASK_ZERO(), make the stack variable to
be zeroed before setting supported interfaces.
Fixes: 57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260608070842.36504-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rework txgbe_identify_module() to validate module identifiers through
explicit type checks instead of relying on transceiver_type heuristics.
When using the SFP module, transceiver_type could be a random value,
because it was read from an invalid register.
Fixes: 57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260608070842.36504-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The module info buffer should be initialized to 0 before the firmware
returns information. Otherwise, there is a risk that the buffer field
not filled by the firmware is random value.
Fixes: 343929799a ("net: txgbe: Support to handle GPIO IRQs for AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260608070842.36504-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Til Kaiser says:
====================
net: mvpp2: fix XDP RX buffer handling
This is v5 of the earlier XDP_PASS fix. The XDP_PASS change is
retained, and the series also fixes related RX/XDP buffer handling
issues found during review.
Tested with tools/testing/selftests/drivers/net/xdp.py on mvpp2
hardware.
====================
Link: https://patch.msgid.link/20260607134943.21996-1-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When an XDP program uses bpf_xdp_adjust_head() or bpf_xdp_adjust_tail()
and then returns XDP_PASS, mvpp2 still builds the skb from fixed offsets
derived from the original RX descriptor. Packet geometry changes made by
the XDP program are therefore discarded before the skb reaches the stack.
Update rx_offset and rx_bytes from xdp.data and xdp.data_end for
XDP_PASS. This makes skb_reserve() and skb_put() reflect the packet seen
by XDP, and makes RX byte accounting for XDP_PASS follow the length of the
skb passed to the network stack.
Keep a separate rx_sync_size for page-pool recycling on skb allocation
failure, which must stay tied to the received buffer range.
Non-PASS verdicts continue to account the descriptor length because no skb
is passed up in those cases.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-5-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX error path returns the current descriptor buffer to the hardware
BM pool. That is only valid while the driver still owns the buffer.
mvpp2_rx_refill() can fail after the current buffer has been handed to
XDP or attached to an skb. In those cases mvpp2_run_xdp() may have
recycled, redirected, or queued the page for XDP_TX, and an skb free also
retires the data buffer. Returning such a buffer to BM lets hardware DMA
into memory that is no longer owned by the RX ring.
Refill the BM pool before handing the current buffer to XDP or to the
skb. If the allocation fails there, drop the packet and return the
still-owned current buffer to BM, preserving the pool depth. Once the
refill succeeds, later local drops retire/free the current buffer instead
of returning it to BM.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Fixes: d6526926de ("net: mvpp2: fix memory leak in mvpp2_rx")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-4-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mvpp2 has short and long BM pools, and short pool buffers can be smaller
than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with
PAGE_SIZE as frame size.
XDP helpers use frame_sz to validate tail growth and to derive the hard
end of the data area. Advertising PAGE_SIZE for short buffers can let
bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting
memory or later tripping skb tailroom checks.
Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches
the actual buffer backing the packet.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-3-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mvpp2 programs the RX queue packet offset, so hardware writes received
data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at
dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the
unused headroom and misses the same number of bytes at the packet tail.
On non-coherent DMA systems this can leave the CPU reading stale cache
contents for the end of the received frame.
Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range
offset so the sync covers the Marvell header and packet data actually
written by hardware.
Fixes: e1921168bb ("mvpp2: sync only the received frame")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-2-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NFT_META_BRI_IIFHWADDR declares its destination register with
len = ETH_ALEN (6 bytes), which the register-init tracking rounds up to
two 32-bit registers (8 bytes). nft_meta_bridge_get_eval() then does
memcpy(dest, br_dev->dev_addr, ETH_ALEN), writing only 6 bytes and
leaving the upper 2 bytes of the second register as uninitialised
nft_do_chain() stack. A downstream load of that register span leaks
those stale bytes to userspace.
Zero the second register before the memcpy so the full declared span is
written.
Fixes: cbd2257dc9 ("netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For NFT_FIB_RESULT_OIFNAME the destination register is declared with
len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail,
RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one
register via "*dest = 0". The remaining three registers are left as
whatever was on the stack in nft_do_chain()'s struct nft_regs, and a
downstream expression that loads the register span can leak that
uninitialised kernel stack to userspace.
The NFTA_FIB_F_PRESENT existence check has the same shape: it is only
meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type
while the eval stores a single byte via nft_reg_store8(), leaving the rest
of the declared span stale.
Fix both:
- replace the bare "*dest = 0" in the eval with nft_fib_store_result(),
which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already
used on the other early-return path), and
- restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its
destination as a single u8, so the marked span matches the one byte
the eval writes.
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Suggested-by: Florian Westphal <fw@strlen.de>
Cc: stable@vger.kernel.org
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_exthdr_init() passes user-controlled priv->len to
nft_parse_register_store(), which marks that many bytes in the
register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT
is set, the eval paths write only 1 byte (nft_reg_store8) or
4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4,
registers beyond the first are never written, retaining
uninitialized stack data from nft_regs.
Bail out if userspace requests too much data when F_PRESENT is set.
Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Fixes: c078ca3b0c ("netfilter: nft_exthdr: Add support for existence check")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The fallback path of dump_mac_header() guards the MAC header access
only with "skb->mac_header != skb->network_header", without checking
skb_mac_header_was_set(). When the MAC header is unset, mac_header is
0xffff, so the test passes and skb_mac_header(skb) returns
skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads
dev->hard_header_len bytes out of bounds into the kernel log.
This is reachable via the netdev logger: nf_log_unknown_packet() calls
dump_mac_header() unconditionally, and an skb sent through AF_PACKET
with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still
unset (__dev_queue_xmit(), which would reset it, is bypassed).
Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already
uses, and replace the open-coded MAC header length test with
skb_mac_header_len(). Only skbs with an unset MAC header are affected;
valid ones are dumped as before.
BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831)
Read of size 1 at addr ffff88800ea49d3f by task exploit/148
Call Trace:
kasan_report (mm/kasan/report.c:595)
dump_mac_header (net/netfilter/nf_log_syslog.c:831)
nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963)
nf_log_packet (net/netfilter/nf_log.c:260)
nft_log_eval (net/netfilter/nft_log.c:60)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307)
nf_hook_slow (net/netfilter/core.c:619)
nf_hook_direct_egress (net/packet/af_packet.c:257)
packet_xmit (net/packet/af_packet.c:280)
packet_sendmsg (net/packet/af_packet.c:3114)
__sys_sendto (net/socket.c:2265)
Fixes: 7eb9282cd0 ("netfilter: ipt_LOG/ip6t_LOG: add option to print decoded MAC header")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The native and compat get-entries paths copy the fixed rule entry header
from the kernelized rule blob to userspace before overwriting the entry's
counter fields with a sanitized counter snapshot.
On SMP kernels, entry->counters.pcnt contains the percpu allocation
address used by x_tables rule counters. A caller can provide a userspace
buffer that faults during the initial fixed-header copy after pcnt has
been copied but before the later sanitized counter copy runs. The syscall
then returns -EFAULT while leaving the raw percpu pointer in userspace.
Copy only the fixed entry prefix before counters from the kernelized rule
blob, then copy the sanitized counter snapshot into the counter field.
Apply this ordering to the IPv4, IPv6, and ARP native and compat
get-entries implementations so a fault cannot expose the internal percpu
counter pointer.
Fixes: 71ae0dff02 ("netfilter: xtables: use percpu rule counters")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
NAT helpers such as nf_nat_h323 store a raw pointer to module text in
exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister()
only unlinks the callback descriptor and never walks the expectation table,
so an expectation pending at module removal survives with a dangling
exp->expectfn into freed module text.
When the expected connection arrives, init_conntrack() invokes
exp->expectfn(), now a stale pointer into the unloaded module. Reproduced
on a KASAN build by loading the H.323 helpers, creating a Q.931
expectation, unloading nf_nat_h323, then connecting to the expected port:
Oops: int3: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:0xffffffffa06102d1
init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862)
nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049)
ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223)
nf_hook_slow (net/netfilter/core.c:619)
__ip_local_out (net/ipv4/ip_output.c:120)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1715)
tcp_connect (net/ipv4/tcp_output.c:4374)
tcp_v4_connect (net/ipv4/tcp_ipv4.c:345)
__sys_connect (net/socket.c:2167)
Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323]
Reaching the dangling state requires CAP_SYS_MODULE in the initial user
namespace to remove a NAT helper that still has live expectations, so this
is a robustness fix; leaving an expectation pointing at freed text is wrong
regardless.
Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and
drops every expectation whose ->expectfn matches the descriptor being torn
down. Call it from each NAT helper's exit path after the existing RCU grace
period, so no expectation outlives the code it points at and no extra
synchronize_rcu() is introduced. With the fix, the same reproducer runs to
completion without the Oops.
Fixes: f587de0e2f ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port")
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reported by sashiko:
If nft_flow_action_entry_next() returns NULL, dev reference leaks.
Fixes: c6f8557758 ("netfilter: nf_tables_offload: add nft_flow_action_entry_next() and use it")
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ebt_redirect_tg() dereferences br_port_get_rcu() return without a
NULL check, causing a kernel panic when the bridge port has been
removed between the original hook invocation and an NFQUEUE
reinject.
A mere NULL check isn't sufficient, however. As sashiko review
points out userspace can not only remove the port from the bridge,
it could also place the device in a different virtual device, e.g.
macvlan.
If this happens, we must drop the packet, there is no way for us to
reinject it into the bridge path.
Switch to _upper API, we don't need the bridge port structure.
Also, this fix keeps another bug intact:
Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER
too aggressive, which prevents certain logging features when queueing
in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old
CONFIG_BRIDGE_NETFILTER cruft is off.
Fixes tag is a common ancestor, this was always broken.
Fixes: f350a0a873 ("bridge: use rx_handler_data pointer to store net_bridge_port pointer")
Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
rds_info_getsockopt() pins the destination user pages with FOLL_WRITE and
the RDS_INFO_* producers memcpy the snapshot into them through
kmap_atomic(). Because that copy goes through the kernel direct map, the
dirty bit on the user PTE is never set, so unpin_user_pages() releases the
pages without marking them dirty. A file-backed destination page can then
be reclaimed without writeback, silently discarding the copied data.
Use unpin_user_pages_dirty_lock() with make_dirty=true so the modified
pages are marked dirty before they are unpinned.
Fixes: a8c879a7ee ("RDS: Info and stats")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260608-rds_fix-v1-1-006c88543408@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In vti6_tnl_lookup(), when an exact match for a tunnel fails,
the code falls back to searching for wildcard tunnels:
- Tunnels matching the packet's local address, with any remote address
wildcard remote).
- Tunnels matching the packet's remote address, with any local address
(wildcard local).
However, vti6 stores all these different types of tunnels in the same
hash table (ip6n->tnls_r_l) prone to hash collisions.
The bug is that the fallback search loops in vti6_tnl_lookup() were
missing checks to ensure that the candidate tunnel actually has
a wildcard address.
Fixes: fbe68ee875 ("vti6: Add a lookup method for tunnels with wildcard endpoints.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260608164613.933023-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a60fc3294a ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight.
Fixes: a60fc3294a ("ptp: rework ptp_clock_unregister() to disable events")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260608155952.240304-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tun_put_user() declares an on-stack struct virtio_net_hdr_v1_hash_tunnel
without zeroing it. For a non-tunnel skb, virtio_net_hdr_tnl_from_skb()
only initializes the first 10 bytes (sizeof(struct virtio_net_hdr)),
leaving bytes 10..23 (num_buffers and the hash/tunnel fields) as stack
garbage.
An unprivileged user can set the vnet header size to 24 with
TUNSETVNETHDRSZ, so __tun_vnet_hdr_put() copies all 24 bytes of the
partially-initialized struct to userspace, leaking 14 bytes of kernel
stack on every read of a non-tunnel packet.
Fix it the same way tun_get_user() already does by zeroing the whole
header right after declaration.
Fixes: 288f304351 ("tun: enable gso over UDP tunnel support.")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260607054428.3050243-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_ib_xmit_atomic() always programs a masked atomic opcode
(IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD)
for every RDS atomic cmsg. But the completion-side switch in
rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked
atomic completion falls through to default and returns rm == NULL while
send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the
NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged
AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection
triggers it; on hardware that natively accepts masked atomics (mlx4,
mlx5) no extra setup is needed.
RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR!
Oops: general protection fault [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197]
RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282)
Call Trace:
<IRQ>
rds_ib_send_cqe_handler (net/rds/ib_send.c:282)
poll_scq (net/rds/ib_cm.c:274)
rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294)
tasklet_action_common (kernel/softirq.c:943)
handle_softirqs (kernel/softirq.c:573)
run_ksoftirqd (kernel/softirq.c:479)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt
Handle the masked atomic opcodes in the same case as the non-masked
ones: they map to the same struct rds_message.atomic union member, so
the existing container_of()/rds_ib_send_unmap_atomic() body is correct
for them.
Fixes: 20c72bd5f5 ("RDS: Implement masked atomic operations")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260606192447.1179255-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership.
Fixes: 8605330aac ("tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbs")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260607021819.49698-1-kylebot@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/75af23a89adf881a0895d511775e4770da367cbf.1780873427.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
john1988 and Noam Rathaus reported that vti6_init_net() does not set the
netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0).
Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel)
correctly set this flag during their fallback device initialization to
prevent them from being moved to another network namespace.
Fixes: 61220ab349 ("vti6: Enable namespace changing")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260608155918.787644-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF
chunk can hold the ADDIP header and a parameter header, then calls
af->from_addr_param(), which reads the full address (16 bytes for IPv6)
trusting the parameter's declared length.
An unauthenticated peer can send a truncated trailing ASCONF chunk that
declares an IPv6 address parameter but stops after the 4-byte parameter
header; reached from the no-association lookup path, from_addr_param() then
reads uninitialized bytes past the parameter.
Impact: an unauthenticated SCTP peer makes the receive path read up to 16
bytes of uninitialized memory past a truncated ASCONF address parameter.
The sibling __sctp_rcv_init_lookup() bounds parameters with
sctp_walk_params(); this path open-codes the fetch and omits the bound.
Verify the whole address parameter lies within the chunk before
from_addr_param() reads it, the same class of fix as commit 51e5ad549c
("net: sctp: fix KMSAN uninit-value in sctp_inq_pop").
Fixes: df21857714 ("[SCTP]: Update association lookup to look at ASCONF chunks as well")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260608122234.459098-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs.
Fixes: e5811b8c09 ("bnxt_en: Add IRQ remapping logic.")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/aiNM1CY2-StPilxW@hpe.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and
then lowers outcnt. That leaves removed stream metadata behind, so a
later re-add can reuse a stale ext and hit a null-pointer dereference in
the scheduler get path.
Fix the rollback by tearing down the removed stream state the same way
other stream resizes do. Unschedule the current scheduler state, drop
the removed stream ext state with sctp_stream_outq_migrate(), and then
reschedule the remaining streams.
This keeps scheduler-private RR/FC/PRIO lists consistent while fully
rolling back denied outgoing stream additions.
Fixes: 637784ade2 ("sctp: introduce priority based stream scheduler")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/d78954ecd94954653ee299400e98d74a03a6f7d3.1780603399.git.bronzed_45_vested@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In esp_output_tail(), when esp->inplace is false, the old skb page frags
are replaced with a new page from the xfrm page_frag cache The source
scatterlist (sg) is built from the old frags before the replacement, and
esp_ssg_unref() is responsible for releasing the old page references
after the crypto operation completes
However, if the second skb_to_sgvec() call (which builds the destination
scatterlist from the new page) fails, the code jumps to error_free which
only calls kfree(tmp). The old page frag references captured in the
source scatterlist are never released:
1 sg[] is built from old frags via skb_to_sgvec() (no extra get_page)
2 nr_frags is set to 1 and frag[0] is replaced with the new page
3 Second skb_to_sgvec() fails -> goto error_free
Fix this by adding a bool parameter to esp_ssg_unref() that, when true,
unconditionally unrefs the source scatterlist frags. Since req->src is
not yet initialized by aead_request_set_crypt() at the point of the
error, the source scatterlist is obtained directly via esp_req_sg()
Existing callers pass false to preserve the original behavior
The same issue exists in both esp4 and esp6 as the code is identical
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Alessandro Schino <7991aleschino@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Jeremy Kerr says:
====================
net: mctp: usb: minor fixes for MCTP over USB transport driver
This series adds a couple of fixes in the ndo_open / ndo_stop path for
the MCTP over USB transport, where we are incorrectly sequencing two
error cases.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
====================
Link: https://patch.msgid.link/20260608-dev-mctp-usb-rx-requeue-v2-0-29a3aa507609@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the ndo_open path, a deferred queue open will report a failure, and
so the netdev will not be ndo_stop()ed, leaving us with the rx_retry
work potentially pending.
Don't report a deferred queue as an error, as we are still operational.
This means we use the ndo_stop() path for future cleanup, which handles
rx_retry_work cancellation.
Fixes: 0791c0327a ("net: mctp: Add MCTP USB transport driver")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260608-dev-mctp-usb-rx-requeue-v2-2-29a3aa507609@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's possible that sequencing between setting ->stopped and cancelling
the rx_retry work (in ndo_stop) could leave us with an urb queued:
T1: ndo_stop T2: rx_retry_work
------------ ----------------
LD: ->stopped => false
ST: ->stopped <= true
usb_kill_urb()
mctp_usb_rx_queue()
usb_submit_urb()
cancel_delayed_work_sync()
That urb completion can then re-schedule rx_retry_work.
Strenghen the sequencing between the stop (preventing another requeue)
and the cancel by updating both atomically under a new rx lock. After
setting ->rx_stopped, and cancelling pending work, we know that the
requeue cannot occur, so all that's left is killing any pending urb.
Fixes: 0791c0327a ("net: mctp: Add MCTP USB transport driver")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260608-dev-mctp-usb-rx-requeue-v2-1-29a3aa507609@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
netvsc_copy_to_send_buf() copies page buffer entries into the VMBus
send buffer using phys_to_virt() on the entry PFN. Entries for the
RNDIS header and the skb linear data come from kmalloc'd memory and
are always in the kernel direct map, but entries for skb fragments
reference page cache or user pages, which on 32-bit x86 with
CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page
phys_to_virt() returns an address outside the direct map and the
subsequent memcpy() faults on the transmit softirq path, which is
fatal.
Map the pages with kmap_local_page() instead, handling two properties
of the page buffer entries:
- pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity,
not a native PFN. Reconstruct the physical address first and derive
the native page from it, so the mapping stays correct where
PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages).
- Since commit 41a6328b2c ("hv_netvsc: Preserve contiguous PFN
grouping in the page buffer array"), an entry describes a full
physically contiguous fragment and pb[i].len can exceed PAGE_SIZE,
while kmap_local_page() maps a single page. Copy page by page,
splitting at native page boundaries.
The copy path only handles packets smaller than the send section size
(6144 bytes by default); larger packets take the cp_partial path where
only the RNDIS header is copied. So entries here are bounded by the
section size and a copy is split at most once on 4K-page systems. On
!CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and
no mapping work is added.
Fixes: c25aaf814a ("hyperv: Enable sendbuf mechanism on the send path")
Cc: stable@vger.kernel.org
Signed-off-by: Anton Leontev <leontyevantony@gmail.com>
Link: https://patch.msgid.link/20260604165938.32033-1-leontyevantony@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If rvu_npc_exact_init() fails in rvu_setup_hw_resources(), the function
returns directly instead of jumping to the error handling path. This
causes a resource leak for the previously initialized CGX, NPC, fwdata,
and MSI-X states.
Fix this by replacing the direct return with goto cgx_err to ensure
proper cleanup.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have
access to Marvell OcteonTX2 RVU AF hardware to test with, no runtime
testing was able to be performed.
Fixes: 3571fe07a0 ("octeontx2-af: Drop rules for NPC MCAM")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260604143756.1524482-1-dawei.feng@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix modification of the received skbuff in rxrpc_input_soft_acks() and a
potential incorrect access of the buffer in a fragmented UDP packet (the
packet would probably have to be deliberately pre-generated as fragmented)
when AF_RXRPC tries to extract the contents of the SACK table by copying
out the contents of the SACK table into a buffer before attempting to parse
AF_RXRPC assumes that it can just call skb_condense() and then validly
access the SACK table from skb->data and that it will be a flat buffer -
but skb_condense() can silently fail to do anything under some
circumstances.
Note that whilst rxrpc_input_soft_acks() should be able to parse extended
ACKs, the rest of AF_RXRPC doesn't currently support that.
Further, there's then no need to call skb_condense() in rxrpc_input_ack(),
so don't.
Fixes: d57a3a1516 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
Reported-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://lore.kernel.org/r/20260513180907.2061972-1-michael.bommarito@gmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: stable@kernel.org
Link: https://patch.msgid.link/105362.1780573560@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If usb_reset_device() returns a negative error code, stop the
process of probing.
Fixes: 10c3271712 ("r8152: disable the ECM mode")
Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260604092247.27158-450-nic_swsd@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the patch in the "Fixes" tag, the allocation of the "reply" skb
can happen either before or after locking the ovs_mutex.
However, error cleanups still follow the classical reversed order,
assuming "reply" is allocated before locking: it is freed after unlocking.
If "reply" allocation happens after locking the mutex and it fails,
"reply" is left with an ERR_PTR, and execution jumps to the correspondent
cleanup stage which will try to free an invalid pointer.
Fix this by setting the pointer to NULL after having saved its error
value.
Fixes: 893f139b9a ("openvswitch: Minimize ovs_flow_cmd_new|set critical sections.")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260604121946.942164-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function
entry and continues using it after iptunnel_handle_offloads().
For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone().
When the skb header is cloned, skb_header_unclone() can call
pskb_expand_head(), which may move the skb head. The pskb_expand_head()
contract requires pointers into the skb header to be reloaded after the
call.
If the later skb_realloc_headroom() branch is not taken, SIT uses the
stale iph6 pointer to read the inner hop limit and DS field. That can
read from a freed skb head after the old head's remaining clone is
released.
Reload iph6 after the offload helper succeeds and before subsequent
reads from the inner IPv6 header. Keep the existing reload after
skb_realloc_headroom(), since that branch can also replace the skb.
Fixes: 14909664e4 ("sit: Setup and TX path for sit/UDP foo-over-udp encapsulation")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+6eb9ca986d80f6f88cf9@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260605073448.6524-1-kylebot@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a sf is created after a CPU has been taken offline, the IRQ pool may
contain IRQs with affinity masks that include the offline CPU. Since only
online CPUs should be considered for IRQ placement, cpumask_subset() check
would fail because the iter_mask contains offline CPUs that are not present
in req_mask, causing sf creation to fail.
This is an example:
1. When mlx5 driver loads, it initializes the IRQ pools.
For sf_ctrl_pool with ≤64 sf:
- xa_num_irqs = {N, N} (There is only one slot)
2. When the first SF is created:
- The ctrl IRQ is allocated with mask=cpu_online_mask={0-191}
2. We take CPU 20 offline
3. Existing ctl irq still have mask={0-191}
4. Create a new SF:
- req_mask={0-19,21-191}
- iter_mask={0-191}
- {0-191} is NOT a subset of {0-19,21-191}
- least_loaded_irq=NULL
5. Try to allocate a new irq via irq_pool_request_irq()
6. xa_alloc() fails because the pool is full(There is only one slot)
7. sf creation fails with error
Use irq_get_effective_affinity_mask() instead, which returns the IRQ's
actual effective affinity that already excludes offline CPUs.
Fixes: 061f5b2358 ("net/mlx5: SF, Use all available cpu for setting cpu affinity")
Suggested-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260605102112.91772-1-fushuai.wang@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame()
returns false (e.g. XDPSQ is full), the function returns without
unmapping the DMA address or freeing the xdp_frame allocated by
xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on
success, so the completion path cannot recover these entries.
With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind:
DMA-API: pci 0000:08:00.0: device driver has pending DMA
allocations while released from device [count=1116]
One of leaked entries details: [device address=0x000000010ffd7028]
[size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy]
WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180
...
DMA-API: Mapped at:
debug_dma_map_phys+0x4b/0xd0
dma_map_phys+0xfd/0x2d0
mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core]
mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core]
mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core]
Add the missing unmap + xdp_return_frame, matching the cleanup already
done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch,
so no per-frag unmap is needed.
Fixes: 84a0a2310d ("net/mlx5e: XDP_TX from UMEM support")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260604135446.456119-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using
the PF's log_max_current_uc/mc_list capabilities. When querying a VF
vport with a larger configured max (via devlink), the firmware response
can overflow this buffer:
BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385
CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_report+0x176/0x4e4
kasan_report+0xc8/0x100
mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core]
esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core]
esw_vport_change_handler+0x6a/0x90 [mlx5_core]
process_one_work+0x87f/0x15e0
worker_thread+0x62b/0x1020
kthread+0x375/0x490
ret_from_fork+0x4dc/0x810
ret_from_fork_asm+0x11/0x20
</TASK>
Fix by querying the vport's own HCA caps to size the buffer correctly.
Refactor the function to allocate and return the MAC list internally,
removing the caller's dependency on knowing the correct max.
Fixes: e16aea2744 ("net/mlx5: Introduce access functions to modify/query vport mac lists")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260604135849.458060-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In qrtr_port_remove(), the socket reference count is decremented via
__sock_put() before the port is removed from the qrtr_ports XArray and
before the RCU grace period elapses.
This breaks the fundamental RCU update paradigm. It exposes a race
window where a concurrent RCU reader (such as qrtr_reset_ports() or
qrtr_port_lookup()) can obtain a pointer to the socket from the XArray,
and attempt to call sock_hold() on a socket whose reference count has
already dropped to zero.
This exact race condition was hit during syzkaller fuzzing, leading to
the following refcount saturation warning and a potential Use-After-Free:
refcount_t: saturated; leaking memory.
WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0
Modules linked in: qrtr(+) bochs drm_shmem_helper ...
Call Trace:
<TASK>
qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr]
__qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr]
qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr]
kernel_bind+0xe4/0x120 net/socket.c:3592
qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr]
qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr]
do_one_initcall+0xf5/0x5e0 init/main.c:1283
...
</TASK>
Fix this by deferring the reference count decrement until after the
xa_erase() and the synchronize_rcu() complete.
(Note: The v1 of this patch incorrectly replaced __sock_put() with
sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove()
still hold a reference to the socket, so freeing the socket memory here
would lead to a subsequent UAF in the caller. Thus, the __sock_put() is
kept, but only repositioned to close the RCU race.)
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260604064801.1180388-1-w15303746062@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxime Chevallier says:
====================
net: phy: some cleanups following phy_port SFP
While posting the v11 of phy_port netlink, sashiko found some
pre-existing issues, and following the tentative fix, Nicolai found
some more :)
This is V3, with a re-ordering of the port/sfp cleanup, as well as a new
patch (patch 3) that also reorders the phy_remove() path.
====================
Link: https://patch.msgid.link/20260604092819.723505-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We don't have support for PHY-driver SFP cages with the genphy code.
On top of that, it was found by sashiko that running
sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY
probing runs under RTNL, which isn't the case for non-genphy drivers.
This problem was reproduced, and does lead to a deadlock on RTNL.
Before the blamed commit, the phy_sfp_probe() call was made by
individual PHY drivers, so there was no way to get to the SFP probing
path when using genphy.
Let's therefore only run phy_sfp_probe when not using genphy.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Fixes: bad869b5e4 ("net: phy: Only rely on phy_port for PHY-driven SFP")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260604092819.723505-5-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported by sashiko when looking a other patches, we need to ensure
that the downstream SFP bus gets unregistered prior to destroying the
phy_ports attached to a phy_device, as the SFP code may reference these
ports. Let's make sure we follow that ordering in phy_remove().
Fixes: 589e934d27 ("net: phy: Introduce PHY ports representation")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260604092819.723505-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
