mirror of
https://github.com/torvalds/linux.git
synced 2026-05-12 16:18:45 +02:00
701ea57fea
6855 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
cb4eb6771c |
Char/Misc/IIO/and others driver updates for 7.1-rc1
Here is the char/misc/iio and other smaller driver subsystem updates for
7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaes/Ng8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymRBQCeOqRduhONI6LPIIvDDTaircoSib0AnRD8WwML
RxHo3/WjEd7FEUqwHA+H
=Heza
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...
|
||
|
|
40286d6379 |
pci-v7.1-changes
-----BEGIN PGP SIGNATURE-----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=FFRz
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
||
|
|
334fbe734e |
mm.git review status for linus..mm-stable
Everything: Total patches: 368 Reviews/patch: 1.56 Reviewed rate: 74% Excluding DAMON: Total patches: 316 Reviews/patch: 1.77 Reviewed rate: 81% Excluding DAMON and zram: Total patches: 306 Reviews/patch: 1.81 Reviewed rate: 82% Excluding DAMON, zram and maple_tree: Total patches: 276 Reviews/patch: 2.01 Reviewed rate: 91% Significant patch series in this merge: - The 30 patch series "maple_tree: Replace big node with maple copy" from Liam Howlett is mainly prepararatory work for ongoing development but it does reduce stack usage and is an improvement. - The 12 patch series "mm, swap: swap table phase III: remove swap_map" from Kairui Song offers memory savings by removing the static swap_map. It also yields some CPU savings and implements several cleanups. - The 2 patch series "mm: memfd_luo: preserve file seals" from Pratyush Yadav adds file seal preservation to LUO's memfd code. - The 2 patch series "mm: zswap: add per-memcg stat for incompressible pages" from Jiayuan Chen adds additional userspace stats reportng to zswap. - The 4 patch series "arch, mm: consolidate empty_zero_page" from Mike Rapoport implements some cleanups for our handling of ZERO_PAGE() and zero_pfn. - The 2 patch series "mm/kmemleak: Improve scan_should_stop() implementation" from Zhongqiu Han provides an robustness improvement and some cleanups in the kmemleak code. - The 4 patch series "Improve khugepaged scan logic" from Vernon Yang "improves the khugepaged scan logic and reduces CPU consumption by prioritizing scanning tasks that access memory frequently". - The 2 patch series "Make KHO Stateless" from Jason Miu simplifies Kexec Handover by "transitioning KHO from an xarray-based metadata tracking system with serialization to a radix tree data structure that can be passed directly to the next kernel" - The 3 patch series "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" from Thomas Ballasi and Steven Rostedt enhances vmscan's tracepointing. - The 5 patch series "mm: arch/shstk: Common shadow stack mapping helper and VM_NOHUGEPAGE" from Catalin Marinas is a cleanup for the shadow stack code: remove per-arch code in favour of a generic implementation. - The 2 patch series "Fix KASAN support for KHO restored vmalloc regions" from Pasha Tatashin fixes a WARN() which can be emitted the KHO restores a vmalloc area. - The 4 patch series "mm: Remove stray references to pagevec" from Tal Zussman provides several cleanups, mainly udpating references to "struct pagevec", which became folio_batch three years ago. - The 17 patch series "mm: Eliminate fake head pages from vmemmap optimization" from Kiryl Shutsemau simplifies the HugeTLB vmemmap optimization (HVO) by changing how tail pages encode their relationship to the head page. - The 2 patch series "mm/damon/core: improve DAMOS quota efficiency for core layer filters" from SeongJae Park improves two problematic behaviors of DAMOS that makes it less efficient when core layer filters are used. - The 3 patch series "mm/damon: strictly respect min_nr_regions" from SeongJae Park improves DAMON usability by extending the treatment of the min_nr_regions user-settable parameter. - The 3 patch series "mm/page_alloc: pcp locking cleanup" from Vlastimil Babka is a proper fix for a previously hotfixed SMP=n issue. Code simplifications and cleanups ennsed. - The 16 patch series "mm: cleanups around unmapping / zapping" from David Hildenbrand implements "a bunch of cleanups around unmapping and zapping. Mostly simplifications, code movements, documentation and renaming of zapping functions". - The 6 patch series "support batched checking of the young flag for MGLRU" from Baolin Wang supports batched checking of the young flag for MGLRU. It's part cleanups; one benchmark shows large performance benefits for arm64. - The 5 patch series "memcg: obj stock and slab stat caching cleanups" from Johannes Weiner provides memcg cleanup and robustness improvements. - The 5 patch series "Allow order zero pages in page reporting" from Yuvraj Sakshith enhances page_reporting's free page reporting - it is presently and undesirably order-0 pages when reporting free memory. - The 6 patch series "mm: vma flag tweaks" from Lorenzo Stoakes is cleanup work following from the recent conversion of the VMA flags to a bitmap. - The 10 patch series "mm/damon: add optional debugging-purpose sanity checks" from SeongJae Park adds some more developer-facing debug checks into DAMON core. - The 2 patch series "mm/damon: test and document power-of-2 min_region_sz requirement" from SeongJae Park adds an additional DAMON kunit test and makes some adjustments to the addr_unit parameter handling. - The 3 patch series "mm/damon/core: make passed_sample_intervals comparisons overflow-safe" from SeongJae Park fixes a hard-to-hit time overflow issue in DAMON core. - The 7 patch series "mm/damon: improve/fixup/update ratio calculation, test and documentation" from SeongJae Park is a "batch of misc/minor improvements and fixups" for DAMON. - The 4 patch series "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" from David Hildenbrand fixes a possible issue with dax-device when CONFIG_HUGETLB=n. Some code movement was required. - The 6 patch series "zram: recompression cleanups and tweaks" from Sergey Senozhatsky provides "a somewhat random mix of fixups, recompression cleanups and improvements" in the zram code. - The 11 patch series "mm/damon: support multiple goal-based quota tuning algorithms" from SeongJae Park extend DAMOS quotas goal auto-tuning to support multiple tuning algorithms that users can select. - The 4 patch series "mm: thp: reduce unnecessary start_stop_khugepaged()" from Breno Leitao fixes the khugpaged sysfs handling so we no longer spam the logs with reams of junk when starting/stopping khugepaged. - The 3 patch series "mm: improve map count checks" from Lorenzo Stoakes provides some cleanups and slight fixes in the mremap, mmap and vma code. - The 5 patch series "mm/damon: support addr_unit on default monitoring targets for modules" from SeongJae Park extends the use of DAMON core's addr_unit tunable. - The 5 patch series "mm: khugepaged cleanups and mTHP prerequisites" from Nico Pache provides cleanups in the khugepaged and is a base for Nico's planned khugepaged mTHP support. - The 15 patch series "mm: memory hot(un)plug and SPARSEMEM cleanups" from David Hildenbrand implements code movement and cleanups in the memhotplug and sparsemem code. - The 2 patch series "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup CONFIG_MIGRATION" from David Hildenbrand rationalizes some memhotplug Kconfig support. - The 6 patch series "change young flag check functions to return bool" from Baolin Wang is "a cleanup patchset to change all young flag check functions to return bool". - The 3 patch series "mm/damon/sysfs: fix memory leak and NULL dereference issues" from Josh Law and SeongJae Park fixes a few potential DAMON bugs. - The 25 patch series "mm/vma: convert vm_flags_t to vma_flags_t in vma code" from "converts a lot of the existing use of the legacy vm_flags_t data type to the new vma_flags_t type which replaces it". Mainly in the vma code. - The 21 patch series "mm: expand mmap_prepare functionality and usage" from Lorenzo Stoakes "expands the mmap_prepare functionality, which is intended to replace the deprecated f_op->mmap hook which has been the source of bugs and security issues for some time". Cleanups, documentation, extension of mmap_prepare into filesystem drivers. - The 13 patch series "mm/huge_memory: refactor zap_huge_pmd()" from Lorenzo Stoakes simplifies and cleans up zap_huge_pmd(). Additional cleanups around vm_normal_folio_pmd() and the softleaf functionality are performed. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCad3HDQAKCRDdBJ7gKXxA jrUQAPwNhPk5nPSxnyxjAeQtOBHqgCdnICeEismLajPKd9aYRgEA0s2XAu3tSUYi GrBnWImHG3s4ePQxVcPCegWTsOUrXgQ= =1Q7o -----END PGP SIGNATURE----- Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - "maple_tree: Replace big node with maple copy" (Liam Howlett) Mainly prepararatory work for ongoing development but it does reduce stack usage and is an improvement. - "mm, swap: swap table phase III: remove swap_map" (Kairui Song) Offers memory savings by removing the static swap_map. It also yields some CPU savings and implements several cleanups. - "mm: memfd_luo: preserve file seals" (Pratyush Yadav) File seal preservation to LUO's memfd code - "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan Chen) Additional userspace stats reportng to zswap - "arch, mm: consolidate empty_zero_page" (Mike Rapoport) Some cleanups for our handling of ZERO_PAGE() and zero_pfn - "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu Han) A robustness improvement and some cleanups in the kmemleak code - "Improve khugepaged scan logic" (Vernon Yang) Improve khugepaged scan logic and reduce CPU consumption by prioritizing scanning tasks that access memory frequently - "Make KHO Stateless" (Jason Miu) Simplify Kexec Handover by transitioning KHO from an xarray-based metadata tracking system with serialization to a radix tree data structure that can be passed directly to the next kernel - "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas Ballasi and Steven Rostedt) Enhance vmscan's tracepointing - "mm: arch/shstk: Common shadow stack mapping helper and VM_NOHUGEPAGE" (Catalin Marinas) Cleanup for the shadow stack code: remove per-arch code in favour of a generic implementation - "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin) Fix a WARN() which can be emitted the KHO restores a vmalloc area - "mm: Remove stray references to pagevec" (Tal Zussman) Several cleanups, mainly udpating references to "struct pagevec", which became folio_batch three years ago - "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl Shutsemau) Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail pages encode their relationship to the head page - "mm/damon/core: improve DAMOS quota efficiency for core layer filters" (SeongJae Park) Improve two problematic behaviors of DAMOS that makes it less efficient when core layer filters are used - "mm/damon: strictly respect min_nr_regions" (SeongJae Park) Improve DAMON usability by extending the treatment of the min_nr_regions user-settable parameter - "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka) The proper fix for a previously hotfixed SMP=n issue. Code simplifications and cleanups ensued - "mm: cleanups around unmapping / zapping" (David Hildenbrand) A bunch of cleanups around unmapping and zapping. Mostly simplifications, code movements, documentation and renaming of zapping functions - "support batched checking of the young flag for MGLRU" (Baolin Wang) Batched checking of the young flag for MGLRU. It's part cleanups; one benchmark shows large performance benefits for arm64 - "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner) memcg cleanup and robustness improvements - "Allow order zero pages in page reporting" (Yuvraj Sakshith) Enhance free page reporting - it is presently and undesirably order-0 pages when reporting free memory. - "mm: vma flag tweaks" (Lorenzo Stoakes) Cleanup work following from the recent conversion of the VMA flags to a bitmap - "mm/damon: add optional debugging-purpose sanity checks" (SeongJae Park) Add some more developer-facing debug checks into DAMON core - "mm/damon: test and document power-of-2 min_region_sz requirement" (SeongJae Park) An additional DAMON kunit test and makes some adjustments to the addr_unit parameter handling - "mm/damon/core: make passed_sample_intervals comparisons overflow-safe" (SeongJae Park) Fix a hard-to-hit time overflow issue in DAMON core - "mm/damon: improve/fixup/update ratio calculation, test and documentation" (SeongJae Park) A batch of misc/minor improvements and fixups for DAMON - "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David Hildenbrand) Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code movement was required. - "zram: recompression cleanups and tweaks" (Sergey Senozhatsky) A somewhat random mix of fixups, recompression cleanups and improvements in the zram code - "mm/damon: support multiple goal-based quota tuning algorithms" (SeongJae Park) Extend DAMOS quotas goal auto-tuning to support multiple tuning algorithms that users can select - "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao) Fix the khugpaged sysfs handling so we no longer spam the logs with reams of junk when starting/stopping khugepaged - "mm: improve map count checks" (Lorenzo Stoakes) Provide some cleanups and slight fixes in the mremap, mmap and vma code - "mm/damon: support addr_unit on default monitoring targets for modules" (SeongJae Park) Extend the use of DAMON core's addr_unit tunable - "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache) Cleanups to khugepaged and is a base for Nico's planned khugepaged mTHP support - "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand) Code movement and cleanups in the memhotplug and sparsemem code - "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup CONFIG_MIGRATION" (David Hildenbrand) Rationalize some memhotplug Kconfig support - "change young flag check functions to return bool" (Baolin Wang) Cleanups to change all young flag check functions to return bool - "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh Law and SeongJae Park) Fix a few potential DAMON bugs - "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo Stoakes) Convert a lot of the existing use of the legacy vm_flags_t data type to the new vma_flags_t type which replaces it. Mainly in the vma code. - "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes) Expand the mmap_prepare functionality, which is intended to replace the deprecated f_op->mmap hook which has been the source of bugs and security issues for some time. Cleanups, documentation, extension of mmap_prepare into filesystem drivers - "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes) Simplify and clean up zap_huge_pmd(). Additional cleanups around vm_normal_folio_pmd() and the softleaf functionality are performed. * tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm: fix deferred split queue races during migration mm/khugepaged: fix issue with tracking lock mm/huge_memory: add and use has_deposited_pgtable() mm/huge_memory: add and use normal_or_softleaf_folio_pmd() mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio() mm/huge_memory: separate out the folio part of zap_huge_pmd() mm/huge_memory: use mm instead of tlb->mm mm/huge_memory: remove unnecessary sanity checks mm/huge_memory: deduplicate zap deposited table call mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE() mm/huge_memory: add a common exit path to zap_huge_pmd() mm/huge_memory: handle buggy PMD entry in zap_huge_pmd() mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc mm/huge: avoid big else branch in zap_huge_pmd() mm/huge_memory: simplify vma_is_specal_huge() mm: on remap assert that input range within the proposed VMA mm: add mmap_action_map_kernel_pages[_full]() uio: replace deprecated mmap hook with mmap_prepare in uio_info drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare mm: allow handling of stacked mmap_prepare hooks in more drivers ... |
||
|
|
d568788baa |
hardening updates for v7.1-rc1
- randomize_kstack: Improve implementation across arches (Ryan Roberts) - lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test - refcount: Remove unused __signed_wrap function annotations -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCad16PwAKCRA2KwveOeQk u7crAP4qz8gXCjes76KsZm/YQS8PtOG5JroAVu5Oa4ohw0RfaQD+K/XLow1plcNF 4Bi8zSuv2ifcLysh9qEAbx5+wcHijgo= =woB3 -----END PGP SIGNATURE----- Merge tag 'hardening-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - randomize_kstack: Improve implementation across arches (Ryan Roberts) - lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test - refcount: Remove unused __signed_wrap function annotations * tag 'hardening-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test refcount: Remove unused __signed_wrap function annotations randomize_kstack: Unify random source across arches randomize_kstack: Maintain kstack_offset per task |
||
|
|
1d3225cb5d |
selftests: pci_endpoint: Skip BAR subrange test on -ENOSPC
In pci-epf-test.c, set the STATUS_NO_RESOURCE status bit if pci_epc_set_bar() returns -ENOSPC. This status bit is used to indicate that there are not enough inbound window resources to allocate the subrange. In pci_endpoint_test.c, return -ENOSPC instead of -EIO when STATUS_NO_RESOURCE is set. In pci_endpoint_test.c, skip the BAR subrange test if -ENOSPC, i.e., there are not enough inbound window resources to run the test. Signed-off-by: Christian Bruel <christian.bruel@foss.st.com> [mani: commit log] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> [bhelgaas: squash related commits] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Koichiro Den <den@valinux.co.jp> Link: https://patch.msgid.link/20260407-skip-bar_subrange-tests-if-enospc-v4-1-6f2e65f2298c@foss.st.com Link: https://patch.msgid.link/20260407-skip-bar_subrange-tests-if-enospc-v4-2-6f2e65f2298c@foss.st.com Link: https://patch.msgid.link/20260407-skip-bar_subrange-tests-if-enospc-v4-3-6f2e65f2298c@foss.st.com |
||
|
|
a5a1804332 |
mei: me: add nova lake point H DID
Add Nova Lake H device id. Cc: stable <stable@kernel.org> Co-developed-by: Tomas Winkler <tomasw@gmail.com> Signed-off-by: Tomas Winkler <tomasw@gmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260405141758.1634556-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
773a43b862 |
mei: lb: add late binding version 2
The second Late Binding version allows to send payload bigger than client MTU by splitting it to chunks and uses separate firmware client for transfer. The component interface is unchanged and driver doing all splitting. Only one Late Binding version is supported by firmware. When Late binding version 2 is supported, the new client is advertised by firmware and existing MKHI will have version 2. This helps driver to select the right mode of work. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260405112326.1535208-3-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
3031b76d65 |
mei: bus: add mei_cldev_uuid
Add mei_cldev_uuid API on mei bus to allow client to query what UUID it bound to. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260405112326.1535208-2-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
a521013548 |
Linux 7.0-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnS4Y8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGe6AIAI4rjLLPlxUKQbx4 JP9lsKH7vqeIVvuMqzFau7+B8ngJ+80OESnBF7n43oNEqdJ0NYiL+rPtcGgBjZDP yUu5DlzVSxpAIQBZe2Nc0dz/5NbT9QxKyC5Yl/whpNIR7UHx1RFvDJYxwN9xKxTw ggLQevKAnHrKjIOKjq70Yqz2T1JMXc9Wp/xpur0oGioiFW/lH24CgHDXjE2Ka9oD wqhotzThuSaaVDmqZ8WNFKxx2onR4r8/NpljaVT2mWRJ2+IMF4pMOBJZRQiNZtRa 1CsoJ3aV6pslAsuC1dLboCMul48VUgyu7l3xQwXVuA5bRO1jqt5ILWC10g09OItU 7CxGTno= =1TRg -----END PGP SIGNATURE----- Merge tag 'v7.0-rc7' into char-misc-next We need the char/misc/iio/comedi fixes in here as well for testing Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
d8bc7934db |
misc: open-dice: replace deprecated mmap hook with mmap_prepare
The f_op->mmap interface is deprecated, so update driver to use its successor, mmap_prepare. The driver previously used vm_iomap_memory(), so this change replaces it with its mmap_prepare equivalent, mmap_action_simple_ioremap(). Link: https://lkml.kernel.org/r/5a83ab00195dc8d0609fa6cc525493010ac4ead1.1774045440.git.ljs@kernel.org Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bodo Stroesser <bostroesser@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Hildenbrand <david@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Long Li <longli@microsoft.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Richard Weinberger <richard@nod.at> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Wei Liu <wei.liu@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
52a9e9cd18 |
mm: rename zap_vma_ptes() to zap_special_vma_range()
zap_vma_ptes() is the only zapping function we export to modules. It's essentially a wrapper around zap_vma_range(), however, with some safety checks: * That the passed range fits fully into the VMA * That it's only used for VM_PFNMAP We will add support for VM_MIXEDMAP next, so use the more-generic term "special vma", although "special" is a bit overloaded. Maybe we'll later just support any VM_SPECIAL flag. While at it, improve the kerneldoc. Link: https://lkml.kernel.org/r/20260227200848.114019-16-david@kernel.org Signed-off-by: David Hildenbrand (Arm) <david@kernel.org> Acked-by: Leon Romanovsky <leon@kernel.org> [drivers/infiniband] Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Arve <arve@android.com> Cc: "Borislav Petkov (AMD)" <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Daniel Borkman <daniel@iogearbox.net> Cc: Dave Airlie <airlied@gmail.com> Cc: David Ahern <dsahern@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jakub Kacinski <kuba@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jann Horn <jannh@google.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Namhyung kim <namhyung@kernel.org> Cc: Neal Cardwell <ncardwell@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Todd Kjos <tkjos@android.com> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
5ab7a22588 |
misc: pci_endpoint_test: Add Tegra194 and Tegra234 device table entries
Add PCI device IDs for Tegra194 (0x1ad4) and Tegra234(0x229b) Endpoint controllers, so that pci_endpoint_test can bind and run on these controllers. Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Link: https://patch.msgid.link/20260324080857.916263-5-mmaddireddy@nvidia.com |
||
|
|
9c55d0eb4e |
misc: pci_endpoint_test: Use -EINVAL for small subrange size
The sub_size check ensures that each subrange is large enough for 32-bit accesses. Subranges smaller than sizeof(u32) do not satisfy this assumption, so this is a local sanity check rather than a resource exhaustion case. Return -EINVAL instead of -ENOSPC for this case. Suggested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Koichiro Den <den@valinux.co.jp> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Link: https://patch.msgid.link/20260320140139.2415480-1-den@valinux.co.jp |
||
|
|
0a18c3bc8d |
mei: csc: wake device while reading firmware status
The CSC has firmware status registers in MMIO and they may be unaccessible while device is suspended. Wake device while reading firmware status via sysfs. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260201094358.1440593-8-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
72fdf0bbd3 |
mei: csc: support controller with separate PCI device
Intel PCI driver for chassis controller embedded in Intel graphics devices. An MEI device here called CSC can be embedded in discrete Intel graphics devices having separate PCI device, to support a range of chassis tasks such as graphics card firmware update and security tasks. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260201094358.1440593-7-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
60ca15971a |
mei: convert PCI error to common errno
Ensure that callers receive only < 0 return value on error. Convert PCI error returned by pci_read_config_dword() to common errno before returning from function. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260201094358.1440593-6-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
eb1b5fc76a |
mei: trace: print return value of pci_cfg_read
Extend debug capabilities. Add return value print in the trace_mei_pci_cfg_read(). Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260201094358.1440593-5-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
bf025a8447 |
mei: me: move trace into firmware status read
Move register trace near it actual read in the firmware status callback and make it adhere to the actual read type. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260201094358.1440593-4-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
f3d0423d41 |
mei: fix idle print specifiers
%01d is equal to %d, simplify the format. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260201094358.1440593-3-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
9e7a2409ec |
mei: me: use PCI_DEVICE_DATA macro
Drop old local MEI_PCI_DEVICE macro and use common PCI_DEVICE_DATA instead. Update defines to adhere to current naming convention. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260201094358.1440593-2-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
b1c7f7aaab |
misc: vmw_vmci: Fix spelling mistakes in comments
'occured' -> 'occurred' (two instances) Found by manual inspection. Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl> Link: https://patch.msgid.link/20260220120904.1907108-1-tomasz.unger@yahoo.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
9aad71144f |
ibmasm: fix heap over-read in ibmasm_send_i2o_message()
The ibmasm_send_i2o_message() function uses get_dot_command_size() to
compute the byte count for memcpy_toio(), but this value is derived from
user-controlled fields in the dot_command_header (command_size: u8,
data_size: u16) and is never validated against the actual allocation size.
A root user can write a small buffer with inflated header fields, causing
memcpy_toio() to read up to ~65 KB past the end of the allocation into
adjacent kernel heap, which is then forwarded to the service processor
over MMIO.
Silently clamping the copy size is not sufficient: if the header fields
claim a larger size than the buffer, the SP receives a dot command whose
own header is inconsistent with the I2O message length, which can cause
the SP to desynchronize. Reject such commands outright by returning
failure.
Validate command_size before calling get_mfa_inbound() to avoid leaking
an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware
frame from the controller's free pool, and returning without a
corresponding set_mfa_inbound() call would permanently exhaust it.
Additionally, clamp command_size to I2O_COMMAND_SIZE before the
memcpy_toio() so the MMIO write stays within the I2O message frame,
consistent with the clamping already performed by outgoing_message_size()
for the header field.
Fixes:
|
||
|
|
0eb09f7374 |
ibmasm: fix OOB reads in command_file_write due to missing size checks
The command_file_write() handler allocates a kernel buffer of exactly
count bytes and copies user data into it, but does not validate the
buffer against the dot command protocol before passing it to
get_dot_command_size() and get_dot_command_timeout().
Since both the allocation size (count) and the header fields (command_size,
data_size) are independently user-controlled, an attacker can cause
get_dot_command_size() to return a value exceeding the allocation,
triggering OOB reads in get_dot_command_timeout() and an out-of-bounds
memcpy_toio() that leaks kernel heap memory to the service processor.
Fix with two guards: reject writes smaller than sizeof(struct
dot_command_header) before allocation, then after copying user data
reject commands where the buffer is smaller than the total size declared
by the header (sizeof(header) + command_size + data_size). This ensures
all subsequent header and payload field accesses stay within the buffer.
Fixes:
|
||
|
|
4b6e6ead55 |
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read
when the queue reader or writer index from hardware exceeds
REMOTE_QUEUE_SIZE (60).
A compromised service processor can trigger this by writing an
out-of-range value to the reader or writer MMIO register before
asserting an interrupt. Since writer is re-read from hardware on
every loop iteration, it can also be set to an out-of-range value
after the loop has already started.
The root cause is that get_queue_reader() and get_queue_writer() return
raw readl() values that are passed directly into get_queue_entry(),
which computes:
queue_begin + reader * sizeof(struct remote_input)
with no bounds check. This unchecked MMIO address is then passed to
memcpy_fromio(), reading 8 bytes from unintended device registers.
For sufficiently large values the address falls outside the PCI BAR
mapping entirely, triggering a machine check exception.
Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of
the loop body, before any call to get_queue_entry(). On an out-of-range
value, reset the reader register to 0 via set_queue_reader() before
breaking, so that normal queue operation can resume if the corrupted
hardware state is transient.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Fixes:
|
||
|
|
2a8c2080b1 |
misc: ti_fpc202: Support special-purpose GPIO lines with LED features
The FPC202 dual port controller has 20 regular GPIO lines and 8 special GPIO lines with LED features. Each one of these "LED GPIOs" can output PWM and blink signals. Add support for the eight special-purpose GPIO lines to the existing FPC202 driver's GPIO support. Add support for registering led-class devices on these GPIO lines. Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Link: https://patch.msgid.link/20260331-fpc202-leds-v3-3-74b173537d42@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
01a80abdb2 |
misc: ti_fpc202: Depend on GPIOLIB instead of selecting it
Selecting a foreign subsystem such as GPIOLIB may lead to dependency loops. Use a "depends on" instead. Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Link: https://patch.msgid.link/20260331-fpc202-leds-v3-1-74b173537d42@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
f485ae8e9a |
misc: ti_fpc202: remove dead code in fpc202_detach_addr()
val is assigned from addr_caches, which is a u8 array. So the check will never be true. Found by code review, compile pass. Signed-off-by: Felix Gu <ustc.gu@gmail.com> Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Link: https://patch.msgid.link/20260221-fp202-v1-2-4d28cb8b28fb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
84664e43ef |
misc: ti_fpc202: fix off-by-one error in port ID bounds check
FPC202_NUM_PORTS is 2, valid port IDs should be 0 and 1. A port_id of 2
would incorrectly pass the check, potentially causing out-of-bounds
access to the port-related arrays.
Found by code review, compile pass.
Fixes:
|
||
|
|
eef2a8ddfa |
misc: amd-sbi: Add device tree mapping for AMD SBRMI devices
Add device tree mapping to enable SBRMI device support across different models and steppings on the AMD Venice platform. Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com> Link: https://patch.msgid.link/20260318112711.2757467-3-Akshay.Gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
82e1288701 |
misc: amd-sbi: Add check to probe only SBRMI devices
AMD OOB devices are differentiated by their Instance ID, with SBRMI assigned Instance ID 1. Since the device ID match does not consider the Instance ID, add an explicit check to restrict probing to only the SBRMI device and exclude other OOB devices. Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com> Link: https://patch.msgid.link/20260318112711.2757467-2-Akshay.Gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
b5e7fb3981 |
misc: amd-sbi: Add revision support for AMD Venice platform
The AMD Venice platform uses revision 0x31 and a two-byte register address size. Add the revision to the CPUID and MCAMSR protocol functions to ensure correct protocol identification. Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com> Link: https://patch.msgid.link/20260318112711.2757467-1-Akshay.Gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
ac7460c603 |
misc: amd-sbi: Address CPUID extended function bits
According to the UAPI header (amd-apml.h), the CPUID extended function
capability is indicated by bits [55:48], but the driver currently
checks bits [63:56]. Adjust the driver to use bits [55:48] so that
extended function capability is detected correctly.
Fixes:
|
||
|
|
6a502776f4 |
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
In the SDSP probe path, qcom_scm_assign_mem() is used to assign the
reserved memory to the configured VMIDs, but its return value was not checked.
Fail the probe if the SCM call fails to avoid continuing with an
unexpected/incorrect memory permission configuration.
This issue was found by an in-house analysis workflow that extracts AST-based
information and runs static checks, with LLM assistance for triage, and was
confirmed by manual code review.
No hardware testing was performed.
Fixes:
|
||
|
|
ba2c83167b |
misc: fastrpc: possible double-free of cctx->remote_heap
fastrpc_init_create_static_process() may free cctx->remote_heap on the
err_map path but does not clear the pointer. Later, fastrpc_rpmsg_remove()
frees cctx->remote_heap again if it is non-NULL, which can lead to a
double-free if the INIT_CREATE_STATIC ioctl hits the error path and the rpmsg
device is subsequently removed/unbound.
Clear cctx->remote_heap after freeing it in the error path to prevent the
later cleanup from freeing it again.
This issue was found by an in-house analysis workflow that extracts AST-based
information and runs static checks, with LLM assistance for triage, and was
confirmed by manual code review.
No hardware testing was performed.
Fixes:
|
||
|
|
f40b1401b6 |
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
The lis3lv02d started triggering a WARN in the IRQ code because it passes IRQF_ONESHOT to request_threaded_irq() even when thread_fn is NULL, which is an invalid combination. So set the flag only if thread_fn is non-NULL. Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://patch.msgid.link/20260326180436.14968-2-ardb@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
cf2f06f715 |
lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
The str* family of fortified functions all use member-sized limits for a while now, so the FORTIFY_STR_OBJECT test is redundant to FORTIFY_STR_MEMBER. While here, replace the strncpy() use with strscpy(), as strncpy() is being removed. Link: https://patch.msgid.link/20260324020726.work.624-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
|
6933515291 |
misc/mei: INTEL_MEI should depend on X86 or DRM_XE
The Intel Management Engine Interface is only present on x86 platforms
and Intel Xe graphics cards. Hence add a dependency on X86 or DRM_XE,
to prevent asking the user about this driver when configuring a kernel
for a non-x86 architecture and without Xe graphics support.
Fixes:
|
||
|
|
8c27b1bce0 |
mei: me: reduce the scope on unexpected reset
After commit |
||
|
|
c3f33af67e |
misc: pci_endpoint_test: Give reserved BARs a distinct error code
Give reserved BARs a distinct error code, such that the pci_endpoint_test selftest will be able to skip test cases that are run against reserved BARs. Signed-off-by: Niklas Cassel <cassel@kernel.org> [mani: Used __fls(CAP_BAR0_RESERVED) instead of PCI_ENDPOINT_CAP_BAR0_RESERVED_BIT] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Tested-by: Koichiro Den <den@valinux.co.jp> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260312130229.2282001-21-cassel@kernel.org |
||
|
|
663eb8763c |
i3c: simplify combined i3c/i2c dependencies
All combined i2c/i3c drivers appear to suffer from the same link time problem when CONFIG_I3C is set to 'm': arm-linux-gnueabi-ld: drivers/iio/magnetometer/mmc5633.o: in function `mmc5633_i3c_driver_init': mmc5633.c:(.init.text+0x30): undefined reference to `i3c_driver_register_with_owner' This was previously fixed every time by marking individual drivers as 'depends on I2C; depends on I3C || !I3C', but this gets tedious and is somewhat confusing. Add a Kconfig symbol 'I3C_OR_I2C' to help replace those dependencies, and use this in all the existing drivers that had already fixed it as well as the new mmc5633 driver. Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://patch.msgid.link/20260204164216.544409-1-arnd@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
|
51fba4aa66 |
misc: pci_endpoint_test: Gate doorbell test on dynamic inbound mapping
The doorbell test relies on the endpoint being able to update inbound translations at runtime so the host can reach the doorbell target through a BAR mapping. If the endpoint does not advertise CAP_DYNAMIC_INBOUND_MAPPING, return -EOPNOTSUPP from PCITEST_DOORBELL. This avoids confusing failures in user space and kselftests when the required capability is not available. Suggested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Koichiro Den <den@valinux.co.jp> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Link: https://patch.msgid.link/20260215150334.3391943-3-den@valinux.co.jp |
||
|
|
32a92f8c89 |
Convert more 'alloc_obj' cases to default GFP_KERNEL arguments
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
323bbfcf1e |
Convert 'alloc_flex' family to use the new default GFP_KERNEL argument
This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
|
505d195b0f |
Char/Misc/IIO driver changes for 7.0-rc1
Here is the big set of char/misc/iio and other smaller driver subsystem changes for 7.0-rc1. Lots of little things in here, including: - Loads of iio driver changes and updates and additions - gpib driver updates - interconnect driver updates - i3c driver updates - hwtracing (coresight and intel) driver updates - deletion of the obsolete mwave driver - binder driver updates (rust and c versions) - mhi driver updates (causing a merge conflict, see below) - mei driver updates - fsi driver updates - eeprom driver updates - lots of other small char and misc driver updates and cleanups All of these have been in linux-next for a while, with no reported issues except for a merge conflict with your tree due to the mhi driver changes in the drivers/net/wireless/ath/ath12k/mhi.c file. To fix that up, just delete the "auto_queue" structure fields being set, see this message for the full change needed: https://lore.kernel.org/r/aXD6X23btw8s-RZP@sirena.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZRxOg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykIrACgs9S+A/GG9X0Kvc+ND/J1XYZpj3QAoKl0yXGj SV1SR/giEBc7iKV6Dn6O =jbok -----END PGP SIGNATURE----- Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc/IIO driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystem changes for 7.0-rc1. Lots of little things in here, including: - Loads of iio driver changes and updates and additions - gpib driver updates - interconnect driver updates - i3c driver updates - hwtracing (coresight and intel) driver updates - deletion of the obsolete mwave driver - binder driver updates (rust and c versions) - mhi driver updates (causing a merge conflict, see below) - mei driver updates - fsi driver updates - eeprom driver updates - lots of other small char and misc driver updates and cleanups All of these have been in linux-next for a while, with no reported issues" * tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits) mux: mmio: fix regmap leak on probe failure rust_binder: return p from rust_binder_transaction_target_node() drivers: android: binder: Update ARef imports from sync::aref rust_binder: fix needless borrow in context.rs iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin iio: sca3000: Fix a resource leak in sca3000_probe() iio: proximity: rfd77402: Add interrupt handling support iio: proximity: rfd77402: Document device private data structure iio: proximity: rfd77402: Use devm-managed mutex initialization iio: proximity: rfd77402: Use kernel helper for result polling iio: proximity: rfd77402: Align polling timeout with datasheet iio: cros_ec: Allow enabling/disabling calibration mode iio: frequency: ad9523: correct kernel-doc bad line warning iio: buffer: buffer_impl.h: fix kernel-doc warnings iio: gyro: itg3200: Fix unchecked return value in read_raw MAINTAINERS: add entry for ADE9000 driver iio: accel: sca3000: remove unused last_timestamp field iio: accel: adxl372: remove unused int2_bitmask field iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll() iio: magnetometer: Remove IRQF_ONESHOT ... |
||
|
|
bb7a3fc2c9 |
i2c-for-7.0-rc1
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware: use a dedicated algorithm for AMD Navi
- designware: replace magic numbers with named constants
- designware: replace min_t() with min() to avoid u8 truncation
- designware: refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
at24 updates for v7.0-rc1
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
-----BEGIN PGP SIGNATURE-----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=gCyg
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware:
- use a dedicated algorithm for AMD Navi
- replace magic numbers with named constants
- replace min_t() with min() to avoid u8 truncation
- refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
- at24 i2c eeprom:
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
* tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
i2c: imx-lpi2c: fix SMBus block read NACK after byte count
i2c: designware: Remove an unnecessary condition
i2c: designware: Enable mode swapping
i2c: designware: Combine the init functions
i2c: designware: Combine some of the common functions
i2c: designware: Use device_is_compatible() instead of custom approach
dt-bindings: eeprom: at24: Add compatible for Puya P24C128F
drivers/i2c/busses: use min() instead of min_t()
i2c: imx-lpi2c: Add runtime PM support for IRQ and clock management on i.MX8QXP/8QM
i2c: amd-mp2: clean up amd_mp2_find_device()
i2c: designware: Replace magic numbers with named constants
i2c: rtl9300: use of instead of fwnode
i2c: rtl9300: remove const cast
i2c: tegra: remove unused rst
i2c: designware: Remove not-going-to-be-supported code for Baikal SoC
i2c: spacemit: drop useless spaces
i2c: mlxbf: Use HZ_PER_KHZ in the driver
i2c: mlxbf: Remove unused bus speed definitions
i2c: core: Use dev_fwnode()
i2c: core: Replace custom implementation of device_match_fwnode()
...
|
||
|
|
136114e0ab |
mm.git review status for linus..mm-nonmm-stable
Total patches: 107 Reviews/patch: 1.07 Reviewed rate: 67% - The 2 patch series "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" from Heming Zhao saves disk space by teaching ocfs2 to reclaim suballocator block group space. - The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in various places. - The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size. - The 7 patch series "kallsyms: Prevent invalid access when showing module buildid" from Petr Mladek cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces. - The 3 patch series "Address page fault in ima_restore_measurement_list()" from Harshit Mogalapalli fixes a kexec-related crash that can occur when booting the second-stage kernel on x86. - The 6 patch series "kho: ABI headers and Documentation updates" from Mike Rapoport updates the kexec handover ABI documentation. - The 4 patch series "Align atomic storage" from Finn Thain adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh. - The 2 patch series "kho: clean up page initialization logic" from Pratyush Yadav simplifies the page initialization logic in kho_restore_page(). - The 6 patch series "Unload linux/kernel.h" from Yury Norov moves several things out of kernel.h and into more appropriate places. - The 7 patch series "don't abuse task_struct.group_leader" from Oleg Nesterov removes the usage of ->group_leader when it is "obviously unnecessary". - The 5 patch series "list private v2 & luo flb" from Pasha Tatashin adds some infrastructure improvements to the live update orchestrator. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6 0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww= =mmsH -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ... |
||
|
|
4cff5c05e0 |
mm.git review status for linus..mm-stable
Everything:
Total patches: 325
Reviews/patch: 1.39
Reviewed rate: 72%
Excluding DAMON:
Total patches: 262
Reviews/patch: 1.63
Reviewed rate: 82%
Excluding DAMON and zram:
Total patches: 248
Reviews/patch: 1.72
Reviewed rate: 86%
- The 14 patch series "powerpc/64s: do not re-activate batched TLB
flush" from Alexander Gordeev makes arch_{enter|leave}_lazy_mmu_mode()
nest properly.
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- The 7 patch series "zram: introduce compressed data writeback" from
Richard Chang and Sergey Senozhatsky implements data compression for
zram writeback.
- The 8 patch series "mm: folio_zero_user: clear page ranges" from David
Hildenbrand adds clearing of contiguous page ranges for hugepages.
Large improvements during demand faulting are demonstrated.
- The 2 patch series "memcg cleanups" from Chen Ridong tideis up some
memcg code.
- The 12 patch series "mm/damon: introduce {,max_}nr_snapshots and
tracepoint for damos stats" from SeongJae Park improves DAMOS stat's
provided information, deterministic control, and readability.
- The 3 patch series "selftests/mm: hugetlb cgroup charging: robustness
fixes" from Li Wang fixes a few issues in the hugetlb cgroup charging
selftests.
- The 5 patch series "Fix va_high_addr_switch.sh test failure - again"
from Chunyu Hu addresses several issues in the va_high_addr_switch test.
- The 5 patch series "mm/damon/tests/core-kunit: extend existing test
scenarios" from Shu Anzai improves the KUnit test coverage for DAMON.
- The 2 patch series "mm/khugepaged: fix dirty page handling for
MADV_COLLAPSE" from Shivank Garg fixes a glitch in khugepaged which was
causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN.
- The 29 patch series "arch, mm: consolidate hugetlb early reservation"
from Mike Rapoport reworks and consolidates a pile of straggly code
related to reservation of hugetlb memory from bootmem and creation of
CMA areas for hugetlb.
- The 9 patch series "mm: clean up anon_vma implementation" from Lorenzo
Stoakes cleans up the anon_vma implementation in various ways.
- The 3 patch series "tweaks for __alloc_pages_slowpath()" from
Vlastimil Babka does a little streamlining of the page allocator's
slowpath code.
- The 8 patch series "memcg: separate private and public ID namespaces"
from Shakeel Butt cleans up the memcg ID code and prevents the
internal-only private IDs from being exposed to userspace.
- The 6 patch series "mm: hugetlb: allocate frozen gigantic folio" from
Kefeng Wang cleans up the allocation of frozen folios and avoids some
atomic refcount operations.
- The 11 patch series "mm/damon: advance DAMOS-based LRU sorting" from
SeongJae Park improves DAMOS's movement of memory betewwn the active and
inactive LRUs and adds auto-tuning of the ratio-based quotas and of
monitoring intervals.
- The 18 patch series "Support page table check on PowerPC" from Andrew
Donnellan makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc.
- The 3 patch series "nodemask: align nodes_and{,not} with underlying
bitmap ops" from Yury Norov makes nodes_and() and nodes_andnot()
propagate the return values from the underlying bit operations, enabling
some cleanup in calling code.
- The 5 patch series "mm/damon: hide kdamond and kdamond_lock from API
callers" from SeongJae Park cleans up some DAMON internal interfaces.
- The 4 patch series "mm/khugepaged: cleanups and scan limit fix" from
Shivank Garg does some cleanup work in khupaged and fixes a scan limit
accounting issue.
- The 24 patch series "mm: balloon infrastructure cleanups" from David
Hildenbrand goes to town on the balloon infrastructure and its page
migration function. Mainly cleanups, also some locking simplification.
- The 2 patch series "mm/vmscan: add tracepoint and reason for
kswapd_failures reset" from Jiayuan Chen adds additional tracepoints to
the page reclaim code.
- The 3 patch series "Replace wq users and add WQ_PERCPU to
alloc_workqueue() users" from Marco Crivellari is part of Marco's
kernel-wide migration from the legacy workqueue APIs over to the
preferred unbound workqueues.
- The 9 patch series "Various mm kselftests improvements/fixes" from
Kevin Brodsky provides various unrelated improvements/fixes for the mm
kselftests.
- The 5 patch series "mm: accelerate gigantic folio allocation" from
Kefeng Wang greatly speeds up gigantic folio allocation, mainly by
avoiding unnecessary work in pfn_range_valid_contig().
- The 5 patch series "selftests/damon: improve leak detection and wss
estimation reliability" from SeongJae Park improves the reliability of
two of the DAMON selftests.
- The 8 patch series "mm/damon: cleanup kdamond, damon_call(), damos
filter and DAMON_MIN_REGION" from SeongJae Park does some cleanup work
in the core DAMON code.
- The 8 patch series "Docs/mm/damon: update intro, modules, maintainer
profile, and misc" from SeongJae Park performs maintenance work on the
DAMON documentation.
- The 10 patch series "mm: add and use vma_assert_stabilised() helper"
from Lorenzo Stoakes refactors and cleans up the core VMA code. The
main aim here is to be able to use the mmap write lock's lockdep state
to perform various assertions regarding the locking which the VMA code
requires.
- The 19 patch series "mm, swap: swap table phase II: unify swapin use"
from Kairui Song removes some old swap code (swap cache bypassing and
swap synchronization) which wasn't working very well. Various other
cleanups and simplifications were made. The end result is a 20% speedup
in one benchmark.
- The 8 patch series "enable PT_RECLAIM on more 64-bit architectures"
from Qi Zheng makes PT_RECLAIM available on 64-bit alpha, loongarch,
mips, parisc, um, Various cleanups were performed along the way.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY1HfAAKCRDdBJ7gKXxA
jqhZAP9H8ZlKKqCEgnr6U5XXmJ63Ep2FDQpl8p35yr9yVuU9+gEAgfyWiJ43l1fP
rT0yjsUW3KQFBi/SEA3R6aYarmoIBgI=
=+HLt
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
||
|
|
1c2b4a4c2b |
pci-v7.0-changes
-----BEGIN PGP SIGNATURE-----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=LIjp
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|