This prevents us from trying to recover from these on speculative paths
in the future.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Henriette Herzog <henriette.herzog@rub.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603205800.334980-4-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Mark these cases as non-recoverable to later prevent them from being
caught when they occur during speculative path verification.
Eduard writes [1]:
The only pace I'm aware of that might act upon specific error code
from verifier syscall is libbpf. Looking through libbpf code, it seems
that this change does not interfere with libbpf.
[1] https://lore.kernel.org/all/785b4531ce3b44a84059a4feb4ba458c68fce719.camel@gmail.com/
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Henriette Herzog <henriette.herzog@rub.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603205800.334980-3-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is required to catch the errors later and fall back to a nospec if
on a speculative path.
Eliminate the regs variable as it is only used once and insn_idx is not
modified in-between the definition and usage.
Do not pass insn but compute it in the function itself. As Eduard points
out [1], insn is assumed to correspond to env->insn_idx in many places
(e.g, __check_reg_arg()).
Move code into do_check_insn(), replace
* "continue" with "return 0" after modifying insn_idx
* "goto process_bpf_exit" with "return PROCESS_BPF_EXIT"
* "goto process_bpf_exit_full" with "return process_bpf_exit_full()"
* "do_print_state = " with "*do_print_state = "
[1] https://lore.kernel.org/all/293dbe3950a782b8eb3b87b71d7a967e120191fd.camel@gmail.com/
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Henriette Herzog <henriette.herzog@rub.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603205800.334980-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A test requires the following to happen:
* CONST_PTR_TO_MAP value is checked for null
* the code in the null branch fails verification
Add test cases:
* direct global map_ptr comparison to null
* lookup inner map, then two checks (the first transforms
map_value_or_null into map_ptr)
* lookup inner map, spill-fill it, then check for null
* use an array of ringbufs to recreate a common coding pattern [1]
[1] https://lore.kernel.org/bpf/CAEf4BzZNU0gX_sQ8k8JaLe1e+Veth3Rk=4x7MDhv=hQxvO8EDw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-4-isolodrai@meta.com
Add a test for CONST_PTR_TO_MAP comparison with a non-0 constant. A
BPF program with this code must not pass verification in unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-3-isolodrai@meta.com
When reg->type is CONST_PTR_TO_MAP, it can not be null. However the
verifier explores the branches under rX == 0 in check_cond_jmp_op()
even if reg->type is CONST_PTR_TO_MAP, because it was not checked for
in reg_not_null().
Fix this by adding CONST_PTR_TO_MAP to the set of types that are
considered non nullable in reg_not_null().
An old "unpriv: cmp map pointer with zero" selftest fails with this
change, because now early out correctly triggers in
check_cond_jmp_op(), making the verification to pass.
In practice verifier may allow pointer to null comparison in unpriv,
since in many cases the relevant branch and comparison op are removed
as dead code. So change the expected test result to __success_unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-2-isolodrai@meta.com
Yonghong Song says:
====================
bpf: Implement mprog API on top of existing cgroup progs
Current cgroup prog ordering is appending at attachment time. This is not
ideal. In some cases, users want specific ordering at a particular cgroup
level. For example, in Meta, we have a case where three different
applications all have cgroup/setsockopt progs and they require specific
ordering. Current approach is to use a bpfchainer where one bpf prog
contains multiple global functions and each global function can be
freplaced by a prog for a specific application. The ordering of global
functions decides the ordering of those application specific bpf progs.
Using bpfchainer is a centralized approach and is not desirable as
one of applications acts as a daemon. The decentralized attachment
approach is more favorable for those applications.
To address this, the existing mprog API ([2]) seems an ideal solution with
supporting BPF_F_BEFORE and BPF_F_AFTER flags on top of existing cgroup
bpf implementation. More specifically, the support is added for prog/link
attachment with BPF_F_BEFORE and BPF_F_AFTER. The kernel mprog
interface ([2]) is not used and the implementation is directly done in
cgroup bpf code base. The mprog 'revision' is also implemented in
attach/detach/replace, so users can query revision number to check the
change of cgroup prog list.
The patch set contains 5 patches. Patch 1 adds revision support for
cgroup bpf progs. Patch 2 implements mprog API implementation for
prog/link attach and revision update. Patch 3 adds a new libbpf
API to do cgroup link attach with flags like BPF_F_BEFORE/BPF_F_AFTER.
Patches 4 and 5 add two tests to validate the implementation.
[1] https://lore.kernel.org/r/20250224230116.283071-1-yonghong.song@linux.dev
[2] https://lore.kernel.org/r/20230719140858.13224-2-daniel@iogearbox.net
Changelogs:
v4 -> v5:
- v4: https://lore.kernel.org/bpf/20250530173812.1823479-1-yonghong.song@linux.dev/
- Remove early prog/link checking based flags and id_or_fd as later code
will do checking as well.
- Do proper cgroup flag checking for bpf_prog_attach().
v3 -> v4:
- v3: https://lore.kernel.org/bpf/20250517162720.4077882-1-yonghong.song@linux.dev/
- Refactor some to make BPF_F_BEFORE/BPF_F_AFTER handling easier to understand.
- Perviously, I degraded 'link' to 'prog' for later mprog handling. This is
not correct. Similar to mprog.c, we should be check 'link' instead link->prog
since it is possible two different links may have the same underlying prog and
we do not want to miss supporting such use case.
v2 -> v3:
- v2: https://lore.kernel.org/bpf/20250508223524.487875-1-yonghong.song@linux.dev/
- Big change to replace get_anchor_prog() to get_prog_list() so the
'struct bpf_prog_list *' is returned directly.
- Support 'BPF_F_BEFORE | BPF_F_AFTER' attachment if the prog list is empty
and flags do not have 'BPF_F_LINK | BPF_F_ID' and id_or_fd is 0.
- Add BPF_F_LINK support.
- Patch 4 is added to reuse id_from_prog_fd() and id_from_link_fd().
v1 -> v2:
- v1: https://lore.kernel.org/bpf/20250411011523.1838771-1-yonghong.song@linux.dev/
- Change cgroup_bpf.revisions from atomic64_t to u64.
- Added missing bpf_prog_put in various places.
- Rename get_cmp_prog() to get_anchor_prog(). The implementation tries to
find the anchor prog regardless of whether id_or_fd is non-NULL or not.
- Rename bpf_cgroup_prog_attached() to is_cgroup_prog_type() and handle
BPF_PROG_TYPE_LSM properly (with BPF_LSM_CGROUP attach type).
- I kept 'id || id_or_fd' condition as the condition 'id' is also used
in mprog.c so I assume it is okay in cgroup.c as well.
====================
Link: https://patch.msgid.link/20250606163131.2428225-1-yonghong.song@linux.dev
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Move static inline functions id_from_prog_fd() and id_from_link_fd()
from prog_tests/tc_helpers.h to test_progs.h so these two functions
can be reused for later cgroup mprog selftests.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163151.2429325-1-yonghong.song@linux.dev
Currently libbpf supports bpf_program__attach_cgroup() with signature:
LIBBPF_API struct bpf_link *
bpf_program__attach_cgroup(const struct bpf_program *prog, int cgroup_fd);
To support mprog style attachment, additionsl fields like flags,
relative_{fd,id} and expected_revision are needed.
Add a new API:
LIBBPF_API struct bpf_link *
bpf_program__attach_cgroup_opts(const struct bpf_program *prog, int cgroup_fd,
const struct bpf_cgroup_opts *opts);
where bpf_cgroup_opts contains all above needed fields.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163146.2429212-1-yonghong.song@linux.dev
Current cgroup prog ordering is appending at attachment time. This is not
ideal. In some cases, users want specific ordering at a particular cgroup
level. To address this, the existing mprog API seems an ideal solution with
supporting BPF_F_BEFORE and BPF_F_AFTER flags.
But there are a few obstacles to directly use kernel mprog interface.
Currently cgroup bpf progs already support prog attach/detach/replace
and link-based attach/detach/replace. For example, in struct
bpf_prog_array_item, the cgroup_storage field needs to be together
with bpf prog. But the mprog API struct bpf_mprog_fp only has bpf_prog
as the member, which makes it difficult to use kernel mprog interface.
In another case, the current cgroup prog detach tries to use the
same flag as in attach. This is different from mprog kernel interface
which uses flags passed from user space.
So to avoid modifying existing behavior, I made the following changes to
support mprog API for cgroup progs:
- The support is for prog list at cgroup level. Cross-level prog list
(a.k.a. effective prog list) is not supported.
- Previously, BPF_F_PREORDER is supported only for prog attach, now
BPF_F_PREORDER is also supported by link-based attach.
- For attach, BPF_F_BEFORE/BPF_F_AFTER/BPF_F_ID/BPF_F_LINK is supported
similar to kernel mprog but with different implementation.
- For detach and replace, use the existing implementation.
- For attach, detach and replace, the revision for a particular prog
list, associated with a particular attach type, will be updated
by increasing count by 1.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163141.2428937-1-yonghong.song@linux.dev
One of key items in mprog API is revision for prog list. The revision
number will be increased if the prog list changed, e.g., attach, detach
or replace.
Add 'revisions' field to struct cgroup_bpf, representing revisions for
all cgroup related attachment types. The initial revision value is
set to 1, the same as kernel mprog implementations.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163136.2428732-1-yonghong.song@linux.dev
Yonghong Song says:
====================
selftests/bpf: Fix a few test failures with arm64 64KB page
My local arm64 host has 64KB page size and the VM to run test_progs
also has 64KB page size. There are a few self tests assuming 4KB page
and failed in my environment.
Patch 1 reduced long assert logs so if the test fails, developers
can check logs easily. Patches 2-4 fixed three selftest failures.
Changelogs:
v3 -> v4:
- v3: https://lore.kernel.org/bpf/20250606213048.340421-1-yonghong.song@linux.dev/
- In v3, I tried to use __kconfig with CONFIG_ARM64_64K_PAGES to decide to have
4K or 64K aligned. But CI seems unhappy about this. Most likely the reason
is due to lskel. So in v4, simply adjust/increase numbers to 64K aligned for
test_ringbuf_write test.
v2 -> v3:
- v2: https://lore.kernel.org/bpf/20250606174139.3036576-1-yonghong.song@linux.dev/
- Fix veristat failure with bpf object file test_ringbuf_write.bpf.o.
v1 -> v2:
- v1: https://lore.kernel.org/bpf/20250606032309.444401-1-yonghong.song@linux.dev/
- Fix a problem with selftest release build, basically from
BUILD_BUG_ON to ASSERT_LT.
====================
Link: https://patch.msgid.link/20250607013605.1550284-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013626.1553001-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
and other related metrics properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013621.1552332-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, uffd_register.range.len is set to 4096 for command
'ioctl(uffd, UFFDIO_REGISTER, &uffd_register)'. For arm64 64KB page size,
the len must be 64KB size aligned as page size alignment is required.
See fs/userfaultfd.c:validate_unaligned_range().
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013615.1551783-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow, if tested failure,
I see a long list of log output like
...
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
...
There are total 7374 lines of the above which is too much. Let us
only issue such logs when it is an assert failure.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013610.1551399-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Within __add_three() function, should use function parameters instead of
global variables. So that the variables groot_nested.inner.root and
groot_nested.inner.glock in rbtree_add_nodes_nested() are tested
correctly.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Link: https://lore.kernel.org/r/tencent_3DD7405C0839EBE2724AC5FA357B5402B105@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When this mode is turned on, "emit_zeroes" and "compact" have no effect,
and embedded NUL characters always terminate printing of an array.
Signed-off-by: Blake Jones <blakejones@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250603203701.520541-2-blakejones@google.com
The BTF dumper code currently displays arrays of characters as just that -
arrays, with each character formatted individually. Sometimes this is what
makes sense, but it's nice to be able to treat that array as a string.
This change adds a special case to the btf_dump functionality to allow
0-terminated arrays of single-byte integer values to be printed as
character strings. Characters for which isprint() returns false are
printed as hex-escaped values. This is enabled when the new ".emit_strings"
is set to 1 in the btf_dump_type_data_opts structure.
As an example, here's what it looks like to dump the string "hello" using
a few different field values for btf_dump_type_data_opts (.compact = 1):
- .emit_strings = 0, .skip_names = 0: (char[6])['h','e','l','l','o',]
- .emit_strings = 0, .skip_names = 1: ['h','e','l','l','o',]
- .emit_strings = 1, .skip_names = 0: (char[6])"hello"
- .emit_strings = 1, .skip_names = 1: "hello"
Here's the string "h\xff", dumped with .compact = 1 and .skip_names = 1:
- .emit_strings = 0: ['h',-1,]
- .emit_strings = 1: "h\xff"
Signed-off-by: Blake Jones <blakejones@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250603203701.520541-1-blakejones@google.com
As is, it appears as if pointer arithmetic is allowed for everything
except PTR_TO_{STACK,MAP_VALUE} if one only looks at
sanitize_check_bounds(). However, this is misleading as the function
only works together with retrieve_ptr_limit() and the two must be kept
in sync. This patch documents the interdependency and adds a check to
ensure they stay in sync.
adjust_ptr_min_max_vals(): Because the preceding switch returns -EACCES
for every opcode except for ADD/SUB, the sanitize_needed() following the
sanitize_check_bounds() call is always true if reached. This means,
unless sanitize_check_bounds() detected that the pointer goes OOB
because of the ADD/SUB and returns -EACCES, sanitize_ptr_alu() always
executes after sanitize_check_bounds().
The following shows that this also implies that retrieve_ptr_limit()
runs in all relevant cases.
Note that there are two calls to sanitize_ptr_alu(), these are simply
needed to easily calculate the correct alu_limit as explained in
commit 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic
mask"). The truncation-simulation is already performed on the first
call.
In the second sanitize_ptr_alu(commit_window = true), we always run
retrieve_ptr_limit(), unless:
* can_skip_alu_sanititation() is true, notably `BPF_SRC(insn->code) ==
BPF_K`. BPF_K is fine because it means that there is no scalar
register (which could be subject to speculative scalar confusion due
to Spectre v4) that goes into the ALU operation. The pointer register
can not be subject to v4-based value confusion due to the nospec
added. Thus, in this case it would have been fine to also skip
sanitize_check_bounds().
* If we are on a speculative path (`vstate->speculative`) and in the
second "commit" phase, sanitize_ptr_alu() always just returns 0. This
makes sense because there are no ALU sanitization limits to be learned
from speculative paths. Furthermore, because the sanitization will
ensure that pointer arithmetic stays in (architectural) bounds, the
sanitize_check_bounds() on the speculative path could also be skipped.
The second case needs more attention: Assume we have some ALU operation
that is used with scalars architecturally, but with a
non-PTR_TO_{STACK,MAP_VALUE} pointer (e.g., PTR_TO_PACKET)
speculatively. It might appear as if this would allow an unsanitized
pointer ALU operations, but this can not happen because one of the
following two always holds:
* The type mismatch stems from Spectre v4, then it is prevented by a
nospec after the possibly-bypassed store involving the pointer. There
is no speculative path simulated for this case thus it never happens.
* The type mismatch stems from a Spectre v1 gadget like the following:
r1 = slow(0)
r4 = fast(0)
r3 = SCALAR // Spectre v4 scalar confusion
if (r1) {
r2 = PTR_TO_PACKET
} else {
r2 = 42
}
if (r4) {
r2 += r3
*r2
}
If `r2 = PTR_TO_PACKET` is indeed dead code, it will be sanitized to
`goto -1` (as is the case for the r4-if block). If it is not (e.g., if
`r1 = r4 = 1` is possible), it will also be explored on an
architectural path and retrieve_ptr_limit() will reject it.
To summarize, the exception for `vstate->speculative` is safe.
Back to retrieve_ptr_limit(): It only allows the ALU operation if the
involved pointer register (can be either source or destination for ADD)
is PTR_TO_STACK or PTR_TO_MAP_VALUE. Otherwise, it returns -EOPNOTSUPP.
Therefore, sanitize_check_bounds() returning 0 for
non-PTR_TO_{STACK,MAP_VALUE} is fine because retrieve_ptr_limit() also
runs for all relevant cases and prevents unsafe operations.
To summarize, we allow unsanitized pointer arithmetic with 64-bit
ADD/SUB for the following instructions if the requirements from
retrieve_ptr_limit() AND sanitize_check_bounds() hold:
* ptr -=/+= imm32 (i.e. `BPF_SRC(insn->code) == BPF_K`)
* PTR_TO_{STACK,MAP_VALUE} -= scalar
* PTR_TO_{STACK,MAP_VALUE} += scalar
* scalar += PTR_TO_{STACK,MAP_VALUE}
To document the interdependency between sanitize_check_bounds() and
retrieve_ptr_limit(), add a verifier_bug_if() to make sure they stay in
sync.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/CAP01T76HZ+s5h+_REqRFkRjjoKwnZZn9YswpSVinGicah1pGJw@mail.gmail.com/
Link: https://lore.kernel.org/bpf/CAP01T75oU0zfZCiymEcH3r-GQ5A6GOc6GmYzJEnMa3=53XuUQQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20250603204557.332447-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After commit 68ca5d4eeb ("bpf: support BPF cookie in raw tracepoint
(raw_tp, tp_btf) programs"), we can show the cookie in bpf_link_info
like kprobe etc.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250603154309.3063644-1-chen.dylane@linux.dev
Core:
- support negative offsets for RTCs that have shipped with an epoch earlier
than 1970
New drivers:
- NXP S32G2/S32G3
- Sophgo CV1800
Drivers:
- loongson: fix missing alarm notifications for ACPI
- m41t80: kickstart ocillator upon failure
- mt6359: mt6357 support
- pcf8563: fix wrong alarm register
- sh: cleanups
-----BEGIN PGP SIGNATURE-----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=Xxip
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There are two new drivers this cycle. There is also support for a
negative offset for RTCs that have been shipped with a date set using
an epoch that is before 1970. This unfortunately happens with some
products that ship with a vendor kernel and an out of tree driver.
Core:
- support negative offsets for RTCs that have shipped with an epoch
earlier than 1970
New drivers:
- NXP S32G2/S32G3
- Sophgo CV1800
Drivers:
- loongson: fix missing alarm notifications for ACPI
- m41t80: kickstart ocillator upon failure
- mt6359: mt6357 support
- pcf8563: fix wrong alarm register
- sh: cleanups"
* tag 'rtc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (39 commits)
rtc: mt6359: Add mt6357 support
rtc: test: Test date conversion for dates starting in 1900
rtc: test: Also test time and wday outcome of rtc_time64_to_tm()
rtc: test: Emit the seconds-since-1970 value instead of days-since-1970
rtc: Fix offset calculation for .start_secs < 0
rtc: Make rtc_time64_to_tm() support dates before 1970
rtc: pcf8563: fix wrong alarm register
rtc: rzn1: support input frequencies other than 32768Hz
rtc: rzn1: Disable controller before initialization
dt-bindings: rtc: rzn1: add optional second clock
rtc: m41t80: reduce verbosity
rtc: m41t80: kickstart ocillator upon failure
rtc: s32g: add NXP S32G2/S32G3 SoC support
dt-bindings: rtc: add schema for NXP S32G2/S32G3 SoCs
dt-bindings: at91rm9260-rtt: add microchip,sama7d65-rtt
dt-bindings: rtc: at91rm9200: add microchip,sama7d65-rtc
rtc: loongson: Add missing alarm notifications for ACPI RTC events
rtc: sophgo: add rtc support for Sophgo CV1800 SoC
rtc: stm32: drop unused module alias
rtc: s3c: drop unused module alias
...
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmhBO1YACgkQfBQHDyUj
g0cuMxAAqscuPU17PjJPDy9Fzaq+B3nsZ9JR+Y/M7ifxFJSedJqdaZc7w4OsfGy2
VZIWiSbpK2WrQHLTh/KlE2AeycO0zX5H1vQmYc4GNQn+18cprxj68YHLb05ZskJq
sNVpEI0zZCxrFUgz8TrwdNcDzTC71TdtD2VLqZ6dCYcoi8lWiHPdbzxR/cSpbENb
ysSrAoJy6v92ES2McH3wLAcwuchlC1wFMof9kVVhe3ueZnrtvuBML/fZldKE85qc
dgcm9r1XOdcU3rOBxKQkQq2b0PzeRcUhUNRErqMQVTNs8Vg3N02x2jM214XKNLGt
G/aFac9neun6iJ3H8rXzHEFhO8bInNddCjfv1SBdV0UR2LZHnzHQHz+0Og/HdyGD
kkr3QsU+JzUQe29cHRwDKUR63l5dd+6PgwkWgcxYuauhFNRFpxdlosepmWZWZ+GE
OVy4D/tWu1acXvorm9ZnIbkg/9anzQJEj78+Y9Tlgh5C59nBINfBtVjTVw9BWDTo
1P9YS3YGdkT49uZu1sust9ug4H9/yifcXY4uXzBdTIYZTt3kNZfncVr3kMkMgAdU
bcm5PvnklIRo+JWd8WftiLQDyF4OWUcf5CG3VVFthIR4Fla+1Wpg41NjQVLvRNzk
Ji/WzLj0Wnzx+QuPyUC3NFKE11IJdB+7hGktfVBHcuQ/W6Vc7bY=
=cu98
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
- New Support
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for this
support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
- Updates
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy
-----BEGIN PGP SIGNATURE-----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=VxLP
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual featuring couple of new driver and bunch of new device
support and some driver changes to Freescale, rockchip driver along
with couple of yaml binding conversions.
New Support:
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for
this support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
Updates:
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy"
* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: tegra: p2u: Broaden architecture dependency
phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
phy: rockchip: inno-usb2: add phy definition for rk3036
dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
phy: phy-snps-eusb2: add support for exynos2200
phy: phy-snps-eusb2: refactor reference clock init
phy: phy-snps-eusb2: make reset control optional
phy: phy-snps-eusb2: make repeater optional
phy: phy-snps-eusb2: split phy init code
phy: phy-snps-eusb2: refactor constructs names
phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
...
Couple of small core changes for
- sdw_assign_device_num() logic simplification, using internal slave id
for irqs and optimizing computing of port params in specific stream
states
- Intel driver updates for ACE3+ microphone privacy status reporting
and enabling the status in HDA Intel driver
-----BEGIN PGP SIGNATURE-----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=izGg
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and an Intel driver change:
- sdw_assign_device_num() logic simplification, using internal slave
id for irqs and optimizing computing of port params in specific
stream states
- Intel driver updates for ACE3+ microphone privacy status reporting
and enabling the status in HDA Intel driver"
* tag 'soundwire-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: only compute port params in specific stream states
ASoC: SOF: Intel: hda: Set the mic_privacy flag for soundwire with ACE3+
soundwire: intel: Add awareness of ACE3+ microphone privacy
soundwire: bus: Add internal slave ID and use for IRQs
soundwire: bus: Simplify sdw_assign_device_num()
Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will be
checked, thus one can now easily catch errors when e.g. using the
'?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel' crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>' if
'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant
'len <= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed in
the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer' to
delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a dependency
for memory backing feature of the Rust null block driver, which is
waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the Rust
subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the pointer
passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time check
of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of 'assert_pinned!'
(so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=JRqL
-----END PGP SIGNATURE-----
Merge tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
-----BEGIN PGP SIGNATURE-----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=DKRi
-----END PGP SIGNATURE-----
Merge tag '6.16-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
"Four smb3 server fixes:
- Fix for special character handling when mounting with "posix"
- Fix for mounts from Mac for fs that don't provide unique inode
numbers
- Two cleanup patches (e.g. for crypto calls)"
* tag '6.16-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: allow a filename to contain special characters on SMB3.1.1 posix extension
ksmbd: provide zero as a unique ID to the Mac client
ksmbd: remove unnecessary softdep on crc32
ksmbd: use SHA-256 library API instead of crypto_shash API
- More stack usage improvements (~600 bytes).
- Define CLASS()es for some commonly used types, and convert most
rcu_read_lock() uses to the new lock guards
- New introspection:
- Superblock error counters are now available in sysfs: previously,
they were only visible with 'show-super', which doesn't provide a
live view
- New tracepoint, error_throw(), which is called any time we return an
error and start to unwind
- Repair
- check_fix_ptrs() can now repair btree node roots
- We can now repair when we've somehow ended up with the journal using
a superblock bucket
- Revert some leftovers from the aborted directory i_size feature, and
add repair code: some userspace programs (e.g. sshfs) were getting
confused.
It seems in 6.15 there's a bug where i_nlink on the vfs inode has been
getting incorrectly set to 0, with some unfortunate results;
list_journal analysis showed bch2_inode_rm() being called (by
bch2_evict_inode()) when it clearly should not have been.
- bch2_inode_rm() now runs "should we be deleting this inode?" checks
that were previously only run when deleting unlinked inodes in
recovery.
- check_subvol() was treating a dangling subvol (pointing to a missing
root inode) like a dangling dirent, and deleting it. This was the
really unfortunate one: check_subvol() will now recreate the root
inode if necessary.
This took longer to debug than it should have, and we lost several
filesystems unnecessarily, becuase users have been ignoring the release
notes and blindly running 'fsck -y'. Debugging required reconstructing
what happened through analyzing the journal, when ideally someone would
have noticed 'hey, fsck is asking me if I want to repair this: it
usually doesn't, maybe I should run this in dry run mode and check
what's going on?'.
As a reminder, fsck errors are being marked as autofix once we've
verified, in real world usage, that they're working correctly; blindly
running 'fsck -y' on an experimental filesystem is playing with fire.
Up to this incident we've had an excellent track record of not losing
data, so let's try to learn from this one.
This is a community effort, I wouldn't be able to get this done without
the help of all the people QAing and providing excellent bug reports and
feedback based on real world usage. But please don't ignore advice and
expect me to pick up the pieces.
If an error isn't marked as autofix, and it /is/ happening in the wild,
that's also something I need to know about so we can check it out and
add it to the autofix list if repair looks good. I haven't been getting
those reports, and I should be; since we don't have any sort of
telemetry yet I am absolutely dependent on user reports.
Now I'll be spending the weekend working on new repair code to see if I
can get a filesystem back for a user who didn't have backups.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmhAuL0ACgkQE6szbY3K
bnZlCg/+Pu2TgWBbkwrmHgKH9v4K3pwQRREXSj0TlbWQp9bK00zEBrmdEfTZKgUC
q5nAAa6zCs0w/A9TFA7t1W/3+JY28ENhoArKFWemLhFZ2qEEXTZlVHvqyHOyuPBf
Loe+hQO8qgWJm6KO9VMCT1pEupslQLRlhI8GhbPPcxPvYXVjmTne7KCanhjeSEx5
TLaOiMn7jr+qPeLZ7xSMaaUTbH2SASjwl2E9/4kG6VqaTTF2MnPNwrdJI0exjyvs
QRaUvYbwBBTe/ru5ddmJuWj+61awKS87ANg+rkO2FWpOrai2HfgHd6o+zge/IR2Z
/Cfarv1SSd1+0caVaGUAzhnoVhOpY1FU4emJwVvcwnBXeXdGIb/kpaw+Lxm7fr+U
J6EnqgUoBsBWBCWgvUxlNHVeJ6wBdVNtDlTHabaH8RSCJZjgjg2JaSQM/v9VPLNa
6jTy3rhkPo50BJBb/F/AZmrobWXR2MkgID3iPEMcpjEyLaRZvW9FPqMFIxKQrUfB
XGDU4dAu3C+Q9i1KDkFIvIG3e7z9nSmv6np4O57CgrmrmmCpRUz7Yy0yhqNs36/H
WhLh/Pjb9gupdFK0TwFiEEG3wfnmXlde2c8IfrXXzKSKPIZ0T/RnLZapS7i94c2E
DumhLYjNjSCiciQZh4eLK0bKx0NETUG79eLUTz5Gi3Pc02E0pU8=
=ZGDn
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-06-04' of git://evilpiepirate.org/bcachefs
Pull more bcachefs updates from Kent Overstreet:
"More bcachefs updates:
- More stack usage improvements (~600 bytes)
- Define CLASS()es for some commonly used types, and convert most
rcu_read_lock() uses to the new lock guards
- New introspection:
- Superblock error counters are now available in sysfs:
previously, they were only visible with 'show-super', which
doesn't provide a live view
- New tracepoint, error_throw(), which is called any time we
return an error and start to unwind
- Repair
- check_fix_ptrs() can now repair btree node roots
- We can now repair when we've somehow ended up with the journal
using a superblock bucket
- Revert some leftovers from the aborted directory i_size feature,
and add repair code: some userspace programs (e.g. sshfs) were
getting confused
It seems in 6.15 there's a bug where i_nlink on the vfs inode has been
getting incorrectly set to 0, with some unfortunate results;
list_journal analysis showed bch2_inode_rm() being called (by
bch2_evict_inode()) when it clearly should not have been.
- bch2_inode_rm() now runs "should we be deleting this inode?" checks
that were previously only run when deleting unlinked inodes in
recovery
- check_subvol() was treating a dangling subvol (pointing to a
missing root inode) like a dangling dirent, and deleting it. This
was the really unfortunate one: check_subvol() will now recreate
the root inode if necessary
This took longer to debug than it should have, and we lost several
filesystems unnecessarily, because users have been ignoring the
release notes and blindly running 'fsck -y'. Debugging required
reconstructing what happened through analyzing the journal, when
ideally someone would have noticed 'hey, fsck is asking me if I want
to repair this: it usually doesn't, maybe I should run this in dry run
mode and check what's going on?'
As a reminder, fsck errors are being marked as autofix once we've
verified, in real world usage, that they're working correctly; blindly
running 'fsck -y' on an experimental filesystem is playing with fire
Up to this incident we've had an excellent track record of not losing
data, so let's try to learn from this one
This is a community effort, I wouldn't be able to get this done
without the help of all the people QAing and providing excellent bug
reports and feedback based on real world usage. But please don't
ignore advice and expect me to pick up the pieces
If an error isn't marked as autofix, and it /is/ happening in the
wild, that's also something I need to know about so we can check it
out and add it to the autofix list if repair looks good. I haven't
been getting those reports, and I should be; since we don't have any
sort of telemetry yet I am absolutely dependent on user reports
Now I'll be spending the weekend working on new repair code to see if
I can get a filesystem back for a user who didn't have backups"
* tag 'bcachefs-2025-06-04' of git://evilpiepirate.org/bcachefs: (69 commits)
bcachefs: add cond_resched() to handle_overwrites()
bcachefs: Make journal read log message a bit quieter
bcachefs: Fix subvol to missing root repair
bcachefs: Run may_delete_deleted_inode() checks in bch2_inode_rm()
bcachefs: delete dead code from may_delete_deleted_inode()
bcachefs: Add flags to subvolume_to_text()
bcachefs: Fix oops in btree_node_seq_matches()
bcachefs: Fix dirent_casefold_mismatch repair
bcachefs: Fix bch2_fsck_rename_dirent() for casefold
bcachefs: Redo bch2_dirent_init_name()
bcachefs: Fix -Wc23-extensions in bch2_check_dirents()
bcachefs: Run check_dirents second time if required
bcachefs: Run snapshot deletion out of system_long_wq
bcachefs: Make check_key_has_snapshot safer
bcachefs: BCH_RECOVERY_PASS_NO_RATELIMIT
bcachefs: bch2_require_recovery_pass()
bcachefs: bch_err_throw()
bcachefs: Repair code for directory i_size
bcachefs: Kill un-reverted directory i_size code
bcachefs: Delete redundant fsck_err()
...
Users seem to be assuming that the 'dropped unflushed entries' message
at the end of journal read indicates some sort of problem, when it does
not - we expect there to be entries in the journal that weren't
commited, it's purely informational so that we can correlate journal
sequence numbers elsewhere when debugging.
Shorten the log message a bit to hopefully make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug where the root inode of a subvolume was erronously deleted:
bch2_evict_inode() called bch2_inode_rm(), meaning the VFS inode's
i_nlink was somehow set to 0 when it shouldn't have - the inode in the
btree indicated it clearly was not unlinked.
This has been addressed with additional safety checks in
bch2_inode_rm() - pulling in the safety checks we already were doing
when deleting unlinked inodes in recovery - but the really disastrous
bug was in check_subvols(), which on finding a dangling subvol (subvol
with a missing root inode) would delete the subvolume.
I assume this bug dates from early check_directory_structure() code,
which originally handled subvolumes and normal paths - the idea being
that still live contents of the subvolume would get reattached
somewhere.
But that's incorrect, and disastrously so; deleting a subvolume triggers
deleting the snapshot ID it points to, deleting the entire contents.
The correct way to repair is to recreate the root inode if it's missing;
then any contents will get reattached under that subvolume's lost+found.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug where bch2_evict_inode() incorrectly called bch2_inode_rm()
- the journal clearly showed the inode was not unlinked.
We've got checks that we use in recovery when cleaning up deleted
inodes, lift them to bch2_inode_rm() as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_update_nodes_written() needs to wait on in-flight writes to old
nodes before marking them as freed. But it has no reason to pin those
old nodes in memory, so some trickyness ensues.
The update we're completing deleted references to those nodes from the
btree, so we know if they've been evicted they can't be pulled back in.
We just have to check if the nodes we have pointers to are still those
old nodes, and haven't been reused.
To do that we check the node's "sequence number" (actually a random 64
bit cookie), but that lives in the node's data buffer. 'struct btree'
can't be freed until filesystem shutdown (as they're quite small), but
the data buffers can be freed or swapped around.
Commit 1f88c35674, which was fixing a kmsan warning, assumed that we
could safely do this locklessly with just a READ_ONCE() - if we've got a
non-null ptr it would be safe to read from.
But that's not true if the data buffer is a vmalloc allocation, so we
need to restore the locking that commit deleted (or alternatively RCU
free those data buffers, but there's no other reason for that).
Fixes: 1f88c35674 ("bcachefs: Fix a KMSAN splat in btree_update_nodes_written()")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Instead of simply recreating a mis-casefolded dirent, use the str_hash
repair code, which will rename it if necessary - the dirent might have
been created again with the correct casefolding.
Factor out out bch2_str_hash_repair key() from
__bch2_str_hash_check_key() for the new path to use, and export
bch2_dirent_create_key() as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_fsck_renamed_dirent was creating bch_dirent keys open-coded - but
we need to use the appropriate helper, if the directory is casefolded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
