uvc_function_bind() walks &opts->extension_units twice without holding
opts->lock:
- directly, for the iExtension string-descriptor fixup loop;
- indirectly, four times via uvc_copy_descriptors() (once per speed),
where the helper iterates uvc->desc.extension_units (which aliases
&opts->extension_units) to size and emit XU descriptors.
The configfs side (uvcg_extension_make / uvcg_extension_drop, in
drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its
list_add_tail / list_del operations. A privileged userspace process
that holds the configfs subtree open and writes the gadget UDC name
to bind the function while concurrently rmdir()'ing an extensions
subdir can race uvcg_extension_drop() against the bind-time list walks
and dereference a freed struct uvcg_extension.
Hold opts->lock from the start of the XU string-descriptor fixup
through the last uvc_copy_descriptors() call, releasing on the
descriptor-error path via a new error_unlock label that drops the
lock before falling through to the existing error label. This
matches the locking discipline of the configfs callbacks and removes
the only remaining unsynchronised reader of the XU list during bind.
Reachability: only privileged processes that can mount configfs and
write to gadget UDC files can trigger the race, so this is a
correctness fix rather than a security boundary.
Fixes: 0525210c98 ("usb: gadget: uvc: Allow definition of XUs in configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Kai Aizen <kai.aizen.dev@gmail.com>
Link: https://patch.msgid.link/20260430175643.67120-1-kai.aizen.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_initialize_gadget() installs gadget_release() as the release
callback for the embedded gadget device. The struct net2280 instance is
therefore released through gadget_release() when the gadget device's last
reference is dropped.
The probe error path calls net2280_remove(), which tears down the
partially initialized device and drops the gadget reference with
usb_put_gadget(). Calling kfree(dev) afterwards can free the same object
again.
Drop the explicit kfree() and let the gadget device release callback
handle the final free. This issue was found by a static analysis tool
I am developing.
Fixes: f770fbec41 ("USB: UDC: net2280: Fix memory leaks")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260427153651.337846-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hidg_alloc() initializes hidg->dev with device_initialize() before
calling dev_set_name(). If dev_set_name() fails, the function currently
jumps to err_unlock and returns without calling put_device().
This leaves the device reference unbalanced and prevents hidg_release()
from being called. Calling put_device() here is also safe, since
hidg_release() only frees resources owned by hidg.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Route the dev_set_name() failure path through err_put_device so the
device reference is dropped properly.
Fixes: 89ff3dfac6 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev")
Cc: stable <stable@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Johan Hovold johan@kernel.org
Link: https://patch.msgid.link/20260413142119.2977716-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths.
Fixes: ffbe2feac5 ("usb: musb: omap2430: Fix probe regression for missing resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260409101104.480623-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We only need to update the power_supply on power role change if the port
is connected, because otherwise the online status should be the same for
both cases.
Cc: stable <stable@kernel.org>
Fixes: 7616f006db ("usb: typec: ucsi: Update power_supply on power role change")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://patch.msgid.link/20260519-ucsi-fix-2-v1-2-6f1239535187@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UGREEN USB-C Multifunction Adapter Model CM512 (AKA "Revodok 107")
exposes two SVIDs: 0xff01 (DP Alt Mode) and 0x1d5c. The DISCOVER_MODES
step succeeds for 0xff01 and gets a NAK for 0x1d5c. Currently this
results in DP Alt Mode not being registered either, since the modes
are only registered once all of them have been discovered. The NAK
results in the processing being stopped and thus no Alt modes being
registered.
Improve the situation by handling the NAK gracefully and continue
processing the other modes.
Before this change, the TCPM log ends like this:
(more log entries before this)
[ 5.028287] AMS DISCOVER_SVIDS finished
[ 5.028291] cc:=4
[ 5.040040] SVID 1: 0xff01
[ 5.040054] SVID 2: 0x1d5c
[ 5.040082] AMS DISCOVER_MODES start
[ 5.040096] PD TX, header: 0x1b6f
[ 5.050946] PD TX complete, status: 0
[ 5.059609] PD RX, header: 0x264f [1]
[ 5.059626] Rx VDM cmd 0xff018043 type 1 cmd 3 len 2
[ 5.059640] AMS DISCOVER_MODES finished
[ 5.059644] cc:=4
[ 5.069994] Alternate mode 0: SVID 0xff01, VDO 1: 0x000c0045
[ 5.070029] AMS DISCOVER_MODES start
[ 5.070043] PD TX, header: 0x1d6f
[ 5.081139] PD TX complete, status: 0
[ 5.087498] PD RX, header: 0x184f [1]
[ 5.087515] Rx VDM cmd 0x1d5c8083 type 2 cmd 3 len 1
[ 5.087529] AMS DISCOVER_MODES finished
[ 5.087534] cc:=4
(no further log entries after this point)
After this patch the TCPM log looks exactly the same, but then
continues like this:
[ 5.100222] Skip SVID 0x1d5c (failed to discover mode)
[ 5.101699] AMS DFP_TO_UFP_ENTER_MODE start
(log goes on as the system initializes DP AltMode)
Cc: stable <stable@kernel.org>
Fixes: 41d9d75344 ("usb: typec: tcpm: add discover svids and discover modes support for sop'")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260429-tcpm-discover-modes-nak-fix-v4-1-75945d0ed30f@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the cdns3 datasheet, the EPRST (Endpoint Reset) command
causes the DMA engine to reposition its internal pointer to the next
Transfer Descriptor (TD) if it was already processing one.
This issue is consistently observed during the ADB identification
process on macOS hosts, where the host issues a Clear_Halt. Although
commit 4bf2dd6513 ("usb: cdns3: gadget: toggle cycle bit before reset
endpoint") attempted to avoid DMA advance by toggling the cycle bit,
trace logs show that on certain hosts like macOS, the DMA pointer
(EP_TRADDR) still shifts after EPRST:
cdns3_ctrl_req: Clear Endpoint Feature(Halt ep1out)
cdns3_doorbell_epx: ep1out, ep_trbaddr f9c04030 <-- Should be f9c04000
cdns3_gadget_giveback: ep1out: req: ... length: 16384/16384
As shown above, the DMA pointer jumped to the next TD, causing
the controller to skip the initial TRBs of the request. This leads to
data misalignment and ADB protocol hangs on macOS.
Fix this by manually restoring the EP_TRADDR register to the starting
physical address of the current request after the EPRST operation is
complete.
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Cc: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Yongchao Wu <yongchao.wu@autochips.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260513160012.2547894-1-yongchao.wu@autochips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If devm_drm_dp_hpd_bridge_add() fails during fusb302_probe(), the original
code returned directly without cleaning up the resources.
Move bridge registration before the IRQ is requested and route bridge
registration failures through the existing TCPM unregister and fwnode
cleanup path.
Fixes: 5d79c52540 ("usb: typec: fusb302: add DRM DP HPD bridge support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260428-fusb-v2-1-aa3b5942cabb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The connector number in a UCSI CCI notification is a 7-bit field
supplied by the PPM. ucsi_connector_change() uses it to index the
ucsi->connector[] array without checking it against the number of
connectors the PPM reported at init time, so a buggy or malicious PPM
(EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /
glink transports) can drive schedule_work() on memory past the end of
the array.
Reject connector numbers that are zero or exceed cap.num_connectors
before dereferencing the array.
Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Jameson Thies <jthies@google.com>
Cc: Nathan Rebello <nathan.c.rebello@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/2026051351-truck-steadfast-df48@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ucsi_displayport_vdm() handles a DP_CMD_CONFIGURE by copying the first
payload VDO from data[], but unlike the equivalent handler in
altmodes/displayport.c it does not check that count covers a VDO beyond
the header. A header-only Configure VDM (count == 1) would read one u32
past the caller's array.
In the normal UCSI path the caller controls count, so this is hardening
for non-standard delivery paths. NAK and bail when no configuration VDO
is present, matching the generic DP altmode driver's existing guard.
Assisted-by: gkh_clanker_t1000
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051351-vividly-flattered-eb3d@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
svdm_consume_modes() checks pmdata->altmodes against the array size once
before the loop over the count, but forgot to check the bound at every
point in the loop.
In the well-behaved SVDM discovery flow this is harmless because each of
at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX
modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the
CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming
ACK with any request the port actually sent. Once port->partner is set,
an unsolicited Discover Modes ACK is consumed unconditionally. A broken
or malicious port partner can therefore drive altmodes to
ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra
Discover Modes ACK with seven VDOs. Because the pre-loop check passes,
the loop could then writes up to five entries past altmode_desc[]. For
mode_data_prime the next field in struct tcpm_port is the
partner_altmode[] pointer array, which then receives partner-chosen
SVID/VDO bytes.
Move the bound check inside the loop so the array can never be indexed
past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner
supplies or how the function was reached.
Assisted-by: gkh_clanker_t1000
Cc: Badhri Jagan Sridharan <badhri@google.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026051351-reshuffle-skillful-90af@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data.
Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/2026051350-plated-salute-0efe@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A broken/malicious port can transmit a CRC-valid frame whose header
advertises up to seven data objects but whose body carries fewer than
that. Check for this, and rightfully reject the message, instead of
reading from uninitialized stack memory.
Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Cc: Amit Sunil Dhamne <amitsd@google.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026051350-sitter-canopener-9045@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A broken/malicious device can send the incorrect count for a status
update VDO, which will cause the kernel to read uninitialized stack data
and send it off elsewhere.
Fix this up by correctly verifying the count for the update object.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051350-reacquire-sculpture-4244@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wcove_read_rx_buffer() copies the PD RX FIFO into the caller's
struct pd_message with
for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++)
regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);
which has two problems:
USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message
is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed).
The byte count latched in RXINFO is the number of bytes the port partner
put on the wire, so a malicious partner that transmits a 31-byte frame
can drive the loop one byte past the destination if the WCOVE BMC
receiver does not enforce the PD object-count limit in hardware. The
existing FIXME flagged this as unverified.
Independently, regmap_read() takes an unsigned int * and stores a full
unsigned int at the destination. Passing the byte pointer msg + i means
each iteration writes four bytes; the high three are zero (val_bits is
8) and are normally overwritten by the next iteration, but the final
iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration
already writes three zero bytes past msg, which sits on the IRQ thread's
stack in wcove_typec_irq().
Clamp the loop to sizeof(struct pd_message) and read each register into
a local before storing only its low byte, so the copy can never exceed
the destination regardless of what RXINFO reports.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051347-clustered-deflected-9543@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes three patches that harden the XDomain property parser
against possible malicious hosts.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=fKQQ
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v7.1-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v7.1-rc5
This includes three patches that harden the XDomain property parser
against possible malicious hosts.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.1-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: property: Cap recursion depth in __tb_property_parse_dir()
thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow
thunderbolt: property: Reject u32 wrap in tb_property_entry_valid()
Core usually prints endpoint addresses with 0x%X format.
Change this code to use it too, instead of just %d.
Particularly for IN, 0x83 seems more readable than 131.
While at that, fix checkpatch warnings about multi-line
quoted strings, as well as missing or doubled whitespace
in those strings.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073258.6532bdd5.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tao Xue found that some common devices violate USB 3.x section 9.6.7
by reporting wBytesPerInterval lower than the size of packets they
actually send. I confirmed that AX88179 may set it to 0 and RTL8153
CDC configuration sets it to 8 but sends both 8 and 16 byte packets:
S Ii:11:007:3 -115:128 16 <
C Ii:11:007:3 0:128 8 = a1000000 01000000
S Ii:11:007:3 -115:128 16 <
C Ii:11:007:3 0:128 16 = a12a0000 01000800 00000000 00000000
Most xHCI host controllers neglect interrupt bandwidth reservations
and let such devices exceed theirs, some fail the URB with EOVERFLOW.
Assume that wBytesPerInterval lower than wMaxPacketSize is bogus and
increase it to the worst case maximum on interrupt IN endpoints. This
solves xHCI problems and appears to have no other effect. Interrupt
transfers are not limited to one interval and drivers submit URBs of
class defined size without looking at wBytesPerInterval. Any multi-
interval transfer is considered terminated by a packet shorter than
wMaxPacketSize regardless of wBytesPerInterval - see USB3 8.10.3.
Stay in spec on OUT endpoints and isochronous. No buggy devices are
known and we don't want to risk sending more data than the device
is prepared to handle or confusing isoc drivers regarding altsetting
capacities guaranteed by the device itself. And don't complain when
wMaxPacketSize <= wBytesPerInterval < wMaxPacketSize * (bMaxBurst+1)
because enabling this seems to be the exact goal of the spec.
Reported-and-tested-by: Tao Xue <xuetao09@huawei.com>
Closes: https://lore.kernel.org/linux-usb/20260402021400.28853-1-xuetao09@huawei.com/
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073207.5b7d26e7.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no good reason to have wBytesPerInterval < wMaxPacketSize -
either one is too low or the other too high, and we may want to warn
about such descriptors. Start with cleaning up our own root hubs.
USB 3.2 section 10.15.1 sets wMaxPacketSize and wBytesPerInterval of
SuperSpeed hub status endpoints at 2 bytes, so reduce wMaxPacketSize
from its former value of 4, which was derived from USB 2.0 spec and
the kernel's USB_MAXCHILDREN limit. They don't apply because USB 3.2
10.15.2.1 specifies SuperSpeed hubs to have up to 15 ports.
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073121.7bc1da0f.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
do_flash() locates the first .cyacd record with
p = strnchr(fw->data, fw->size, ':');
while (p < eof) {
s = strnchr(p + 1, eof - p - 1, ':');
...
}
If the firmware image contains no ':' byte, strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.
The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.
Bail out with -EINVAL when the initial strnchr() returns NULL.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026051405-posture-shrill-7884@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values.
Fixes: 93c473948c ("usb: gadget: add WebUSB landing page support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jeremy Erazo <mendozayt13@gmail.com>
Link: https://patch.msgid.link/20260512160530.352318-1-mendozayt13@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the error code on these two error paths. The existing code returns
success.
Fixes: 77ed2f4538 ("usb: typec: tipd: Use read_power_status function in probe")
Fixes: 04041fd7d6 ("usb: typec: tipd: Read data status in probe and cache its value")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/agL9o7wUK1dOVBTy@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A DIRECTORY entry's value field is used as the dir_offset for a
recursive call into __tb_property_parse_dir() with no depth counter.
A crafted peer that chains DIRECTORY entries into a back-reference
loop drives the parser until the kernel stack is exhausted and the
guard page fires. Any untrusted XDomain peer (cable, dock, in-line
inspector, adjacent host) that reaches the PROPERTIES_REQUEST
control-plane exchange can trigger this without authentication.
Thread a depth counter through tb_property_parse() and
__tb_property_parse_dir(), and reject blocks that exceed
TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any
observed legitimate XDomain layout.
Operators who do not need XDomain host-to-host discovery can disable
the path entirely with thunderbolt.xdomain=0 on the kernel command
line.
Fixes: cdae7c07e3 ("thunderbolt: Add support for XDomain properties")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
On the non-root path, __tb_property_parse_dir() takes dir_len from
entry->length (u16 widened to size_t). Two distinct OOB conditions
follow when entry->length < 4:
1. The non-root path begins with kmemdup(&block[dir_offset],
sizeof(*dir->uuid), ...) which always reads 4 dwords from
dir_offset. tb_property_entry_valid() only enforces
dir_offset + entry->length <= block_len, so a crafted entry
with dir_offset close to the end of the property block and
entry->length in 0..3 passes that gate but lets the UUID copy
run off the block (e.g. dir_offset = 497, dir_len = 3 in a
500-dword block reads block[497..501]).
2. After the kmemdup, content_len = dir_len - 4 underflows size_t
to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry
walk runs OOB on each iteration until an entry fails
validation or the kernel oopses on an unmapped page.
Reject dir_len < 4 on the non-root path *before* the UUID kmemdup,
which closes both holes.
Also move INIT_LIST_HEAD(&dir->properties) up to immediately after
the dir allocation so the new error-return path (and the existing
uuid-alloc failure path) calling tb_property_free_dir() sees a
walkable list rather than the zero-initialized NULL next/prev that
list_for_each_entry_safe() would oops on.
Fixes: cdae7c07e3 ("thunderbolt: Add support for XDomain properties")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
entry->value is u32 and entry->length is u16; the sum is performed in
u32 and wraps. A malicious XDomain peer can pick
value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0
and passes the > block_len check. tb_property_parse() then passes
entry->value to parse_dwdata() as a dword offset into the property
block, reading attacker-directed memory far past the allocation.
For TEXT-typed entries with the "deviceid" or "vendorid" keys this
lands in xd->device_name / xd->vendor_name and is readable back via
the per-XDomain device_name / vendor_name sysfs attributes; the leak
is NUL-bounded (kstrdup() stops at the first zero byte) and
untargeted (the attacker picks a delta, not an absolute address).
DATA-typed entries are parsed into property->value.data but not
generically surfaced to userspace.
Use check_add_overflow() so a wrapped sum is rejected.
Fixes: cdae7c07e3 ("thunderbolt: Add support for XDomain properties")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
-----BEGIN PGP SIGNATURE-----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=yAV8
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260426172505.1947915-1-graypanda.inzag@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23cea ("xsk: Fix possible segfault at xskmap entry insertion")
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/e4d7b53d4963ef520541a782f5fc8108a168877c.1778176504.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix a regression in overlayfs caused by an fsverity API change
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaf97zhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK+PtAQDzevIJ21gYwhimSRxpbB/eDRQO3gD2
wz4bz2lXZiCjIwEA8rktrlFgrLeqo1W252YXGpvlczf5qgupos3t4Hm8LAk=
=WsMl
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Fix a regression in overlayfs caused by an fsverity API change"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
ovl: fix verity lazy-load guard broken by fsverity_active() semantic change
Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7ksA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3cACgjbF86RGquBMOmCvW0y05gLGXACsAoM4cOfQd
Wel+rDTKUoa6FvreddHi
=vHTv
-----END PGP SIGNATURE-----
Merge tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues"
* tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
staging: vme_user: fix root device leak on init failure
Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7mNg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylbXACfWg3KnXzN+gCG8PM/zVLtinrAhDgAoLzKi1xv
OqVhzuOICtZiP8WBoBoC
=SeVl
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit Cinterion LE910Cx compositions
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usb: dwc3: Move GUID programming after PHY initialization
usb: typec: tcpm: fix debug accessory mode detection for sink ports
usb: typec: tcpm: reset internal port states on soft reset AMS
usb: ulpi: fix memory leak on ulpi_register() error paths
USB: omap_udc: DMA: Don't enable burst 4 mode
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
-----BEGIN PGP SIGNATURE-----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=rlX+
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
* tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: reject oversized block transfers in the common path
MAINTAINERS: Update mail for Peter Rosin
i2c: stub: Reject I2C block transfers with invalid length
i2c: Compare the return value of gpiod_get_direction against GPIO_LINE_DIRECTION_OUT
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
i2c: acpi: Add ELAN0678 to i2c_acpi_force_100khz_device_ids
dt-bindings: i2c: apple,i2c: Add t8122 compatible
i2c: stm32f7: reinit_completion() per transfer not per msg
dt-bindings: i2c: amlogic: Add compatible for T7 SOC
i2c: testunit: Replace system_long_wq with system_dfl_long_wq
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to:
Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP), Geert
Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar Chaurasiya (IBM),
Nathan Chancellor, Ritesh Harjani (IBM), Shivani Nittor, Sourabh Jain, Thomas
Zimmermann, Venkat Rao Bagalkote
-----BEGIN PGP SIGNATURE-----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=ZRl8
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP),
Geert Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar
Chaurasiya (IBM), Nathan Chancellor, Ritesh Harjani (IBM), Shivani
Nittor, Sourabh Jain, Thomas Zimmermann, and Venkat Rao Bagalkote.
* tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
powerpc/pasemi: Drop redundant res assignment
powerpc/ps3: Drop redundant result assignment
powerpc/vdso: Drop -DCC_USING_PATCHABLE_FUNCTION_ENTRY from 32-bit flags with clang
arch/powerpc: Drop CONFIG_FIRMWARE_EDID from defconfig files
powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
powerpc/8xx: Fix interrupt mask in cpm1_gpiochip_add16()
powerpc/vmx: avoid KASAN instrumentation in enter_vmx_ops() for kexec
powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o
pseries/papr-hvpipe: Fix style and checkpatch issues in enable_hvpipe_IRQ()
pseries/papr-hvpipe: Refactor and simplify hvpipe_rtas_recv_msg()
pseries/papr-hvpipe: Kill task_struct pointer from struct hvpipe_source_info
pseries/papr-hvpipe: Simplify spin unlock usage in papr_hvpipe_handle_release()
pseries/papr-hvpipe: Fix the usage of copy_to_user()
pseries/papr-hvpipe: Fix & simplify error handling in papr_hvpipe_init()
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
pseries/papr-hvpipe: Fix race with interrupt handler
powerpc/pseries/htmdump: Add memory configuration dump support to htmdump module
powerpc/pseries/htmdump: Fix the offset value used in htm status dump
powerpc/pseries/htmdump: Fix the offset value used in processor configuration dump
...
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to
TCMalloc's creative use of the supposedly read-only field.
The fix is to introduce a new ABI variant based on
a new (larger) rseq area registration size, to keep
the TCMalloc use of rseq backwards compatible on new kernels.
(Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmn+lBARHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1iy1hAAunlBoDq8/MXSt4JeMRX/3p+CKihExTnO
LO535Rv8DfcepBgZIysTJKMn9bM/l+7OXGdQ+YDjS70GsLM2aOzDYBKCwOHHm0pZ
OJ6Y+UUFAacnQS4EuQLqyNBW0Ice4AIYWu0pLLADs2KUgX1DmSo9bhgZbHcbsMnA
IjoaFNhebeA1bHSDD11UIHTza23mqEinxM0yOK8pT+M6fOMXWOo/kLLLYjG/yAIB
qBFGpwJkdKjBcpCmAYU9jpw26p/17YMzkgmAaUXOKRLZi+h5zQMNVjR+OIjK4qxt
z5Tj+h7t3IcFV2d1zUThPpxxHLn3ro30R5mW0OrsPPFI8AkSRC6GsIX/Ft9uFbQQ
1SGknyx5qLrSldmT8KKXPlM/vriyh3iL6/QMgXtTb8FfegRCbjXsZy39s3wOexCD
oBnJt0rX3NviPyb/Up9cfdx++kPfJM074NdVHRBW4ucoOpwHosNcuBP0YQsctFw0
QO7lkfjTo19eB9ftSyfadwF9e+2jYF7YoLmTOKqGLbZEQeIT5tJHDgHklLWrqHAh
HDmDCHyqtiXBDCeapqnomrhqczKlSUK1Qqk/Hh+Hwiwj0N4vLhHXmRIpTb/R43/Y
i6cdwV8Xtl+RltmYaINpMxdnFl/iz/kpapYkqy/ykLNfBj01AWbdaIVPRk47ndU1
E29BSjMZhPU=
=2QJp
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
rather than the tracer's.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmn+axkACgkQa9axLQDI
XvGuUBAAsRvdVRfO4Td1UKAMJj3jnqXZpD1Ws4LXAHsqZP2J5Zpbu5uQso0BD8wa
mVlAv62r/JQQXImtxEEcJ006xl4zzQK7NP85KLPeeXzFMtcOm74rNZ5mQR++Pv/1
t6Xi2DGxapqKbeVEnud+5L7eWK0kxrd0cuL338aMTZ8+aQIImIKtp2KkdowDtLqJ
hzTeL89W00T/V9+o7/aCCLCzY3X9ti5N2F5YnoeK7TZi4rWrjPdCSbpAEfToafHq
x+5qMvdfxzZjHfGwhD3R+BZmlR9L7XPabQvWXM2SMGxw79/qMurnKeczYlFADgsa
jM9c8iSdkSavcTDlm1J9qoLEh6rEEQqAYf+h9aaGnmJDqVzTvdzeuIQlAX9mKS6a
0oQJ4WUTw8lgdgTrEbiE38DkaTQMqvB47tw3BxNHDIsD1ApWf1hZWoNEQysJPHsS
z27MYUUUIpKmq3iDcR38IHgI5uYLG5I50A2bIvlyo6Kr66LrIDyxVHCrnBL+ZiQh
9gTswe9X5vJVDlVhkQ1GHKdUADb+WVu4KU4ZTfcTjuk4T6e/KBB/e4LsjvCqgz01
xTulCs5lBjczoGmzT/SlK8ecAQOX3nHFhp9EMDXv/7DWw7waHohF+TAdTHlVFSOh
NNduLU4VuGpUaynPLeaM7C6ZvXNdIHnj3ZmQAZnc5GATXKSm5I4=
=0Pwc
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
- ptrace(PTRACE_SETREGSET) fix to zero the target's fpsimd_state rather
than the tracer's
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: ptrace: zero target's fpsimd_state, not the tracer's
-----BEGIN PGP SIGNATURE-----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=g+Cm
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Don't fallback to bus reset after failed slot reset; a bus reset
isn't safe if the .reset_slot() callback is implemented (Keith Busch)
- Update saved_config_space upon resource assignment to fix passthrough
regressions when x86 pcibios_assign_resources() updates BARs (Lukas
Wunner)
- Initialize a temporary pci_dev->dev in sysfs 'new_id' attribute to
fix a lockdep regression after driver_override was moved from PCI to
device core (Samiullah Khawaja)
- Update MAINTAINERS email addresses (Marek Vasut, Hans Zhang)
- Add MAINTAINERS reviewer for PCIe Cadence IP (Aksh Garg)
* tag 'pci-v7.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Aksh Garg as PCIe CADENCE reviewer
MAINTAINERS: Update Hans Zhang email for PCIe CIX Sky1
MAINTAINERS: Update Marek Vasut email for PCIe R-Car
PCI: Initialize temporary device in new_id_store()
PCI: Update saved_config_space upon resource assignment
PCI: Don't fallback to bus reset after failed slot reset
