Merge series from Mario Limonciello <superm1@kernel.org>:
The various AMD audio drivers have self contained implementations
for SMN router communication that require hardcoding the bridge ID.
These implementations also don't prevent race conditions with other
drivers performing SMN communication.
A new centralized driver AMD_NODE is introduced and all drivers in
the kernel should use this instead. Adjust all AMD audio drivers to
use it.
host_bridge_id is no longer used by any of the SoCs as they
all use AMD_NODE to communicate with SMN routers.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250217231747.1656228-8-superm1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As the ACP drivers use the AMD_NODE provided symbols, the local
ones are no longer necessary.
Tested by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250217231747.1656228-7-superm1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All consumers of SMN in the kernel should be doing it through the
functions provided by AMD_NODE.
Stop using the local SMN read/write symbols and switch to the AMD_NODE
provided ones.
Tested by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250217231747.1656228-6-superm1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All consumers of SMN in the kernel should be doing it through the
functions provided by AMD_NODE.
Stop using the local SMN read/write symbols and switch to the AMD_NODE
provided ones.
Tested by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250217231747.1656228-5-superm1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All consumers of SMN in the kernel should be doing it through the
functions provided by AMD_NODE.
Stop using the local SMN read/write symbols and switch to the AMD_NODE
provided ones.
Tested by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250217231747.1656228-4-superm1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All consumers of SMN in the kernel should be doing it through the
functions provided by AMD_NODE.
Stop using the local SMN read/write symbols and switch to the AMD_NODE
provided ones.
Tested by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250217231747.1656228-3-superm1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some of the ACP drivers will poll registers through SMN using
read_poll_timeout() which requires returning the result of the register read
as the argument.
Add a helper to do just that.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250217231747.1656228-2-superm1@kernel.org
The devm_ioremap() function doesn't return error pointers, it returns
NULL on error. Update the checking to match.
Fixes: 651e0ed391 ("ASoC: SOF: imx: introduce more common structures and functions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/68973636-eab8-4d82-8359-ae2c8f60f261@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from broonie@kernel.org:
This is a random subset of the patches for the tas2764 driver that I
found in the Asahi Linux tree which seemed to be clear fixes and
improvements which apply easily to mainline without much effort, there's
a bunch more work on the driver that should also be applicable.
I've only build tested this.
The wm8960 codec may be used with audio graph card and thus may require an
additional property: 'port'. Add it.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250207163029.3365-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hard-coded strings by using the str_enabled_disabled() helper
function. Remove unnecessary curly braces.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250210224453.363638-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no module namespace "SND_SOC_SOF_INTEL_HIFI_EP_IPC", so don't
import it. Historically there was such a namespace, but it was dropped
in commit 97e22cbd0d ("ASoC: SOF: Make Intel IPC stream ops generic").
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250212172947.38970-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lower the volume if it is violating the platform maximum at its initial
value (i.e. at the time of the 'snd_soc_limit_volume' call).
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
[Cherry picked from the Asahi kernel with fixups -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-volume-limit-v1-1-b98fcf4cdbad@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There are certain registers on AMD Zen systems that can only be accessed
through SMN.
Introduce a new interface that provides debugfs files for accessing SMN. As
this introduces the capability for userspace to manipulate the hardware in
unpredictable ways, taint the kernel when writing.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250130-wip-x86-amd-nb-cleanup-v4-3-b5cc997e471b@amd.com
Offsets 0x60 and 0x64 are used internally by kernel drivers that call
the amd_smn_read() and amd_smn_write() functions. If userspace accesses
the regions at the same time as the kernel it may cause malfunctions in
drivers using the offsets.
Add these offsets to the exclusions so that the kernel is tainted if a
non locked down userspace tries to access them.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250130-wip-x86-amd-nb-cleanup-v4-2-b5cc997e471b@amd.com
The HSMP interface is just an SMN interface with different offsets.
Define an HSMP wrapper in the SMN code and have the HSMP platform driver
use that rather than a local solution.
Also, remove the "root" member from AMD_NB, since there are no more
users of it.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250130-wip-x86-amd-nb-cleanup-v4-1-b5cc997e471b@amd.com
When we shut down the amp, we need to wait for the built-in ramp-down
before we can remove the TDM clocks. There is no documented status
regiter to poll, so the best we can do is a delay. Datasheet says 5.9ms
for ramp-down and 1.5ms between shutdown and next startup, so let's do
6ms after mute and 2ms after shutdown. That gives us a cumulative 8ms
for ramp-down and guaratees the required minimum shutdown time.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2764-v1-2-dbab892a69b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC convention is that clocks are removed after codec mute, and
power up/down is more about top level power management. For these chips,
the "mute" state still expects a TDM clock, and yanking the clock in
this state will trigger clock errors. So, do the full
shutdown<->mute<->active transition on the mute operation, so the amp is
in software shutdown by the time the clocks are removed.
This fixes TDM clock errors when streams are stopped.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2764-v1-1-dbab892a69b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
DPCM is already difficult to read, but now dpcm_dai_trigger_fe_be() even
difficult to read.
static int dpcm_dai_trigger_fe_be(.., fe_first)
{
^ if (fe_first) {
(A) ...
|(x) goto end;
v }
^
(B) ...
v
end:
return ...
}
It want to switch function call order by using "fe_first" for fe->be
order part (A), or be->fe order part (B). But the code is using "goto"
in last of (A) (=x).
Just use "if..else" for (A) (B) is easy to read and understand what it
want to do.
static int dpcm_dai_trigger_fe_be(.., fe_first)
{
^ if (fe_first) {
(A) ...
v }
^ else {
(B) ...
v }
return ...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikpfyjyo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_process_paths() will call dpcm_add_paths() (A) or
dpcm_prune_paths() (B)
dpcm_process_paths(..., new)
{
if (new)
(A) return dpcm_add_paths(...);
else
(B) return dpcm_prune_paths(...);
}
but the user who need to call dpcm_prune_paths() (B) is only
soc_dpcm_fe_runtime_update(), all other user want to call is
dpcm_add_paths() (A). We don't need to have confusing
dpcm_process_paths(). Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz9vyjyu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card :: update is used only for passing parameters to
dapm_widget_update() like below.
card->update = update;
ret = soc_dapm_xxx(card, ...);
card->update = NULL;
Let's passing it via function parameter and remove update from
snd_soc_card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldubyjz9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can get struct snd_soc_pcm_runtime from struct snd_pcm_substream,
no need to have both as function parameter. Let's shrink it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87mseryk5l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_set_tdm_slot() calls .xlate_tdm_slot_mask() or
snd_soc_xlate_tdm_slot_mask(), but didn't check its return value.
Let's check it.
This patch might break existing driver. In such case, let's makes
each func to void instead of int.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6z7yk61.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No one uses dpcm_dapm_stream_event() return value, and it always
return 0. Let's makes it void.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87seojyk6m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core.c only calls snd_soc_set_dmi_name(), so we don't need to have
EXPORT_SYMBOL_GPL() for it. Let's makes it local function.
No one uses *flavour parameter, let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7tfyk7b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All dpcm from for_each_dpcm_be(fe, ...) loop has same fe
(that is the reason to connected to this list). We don't need to
check (dpcm->fe == fe) in this loop.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wmdvyk87.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
-----BEGIN PGP SIGNATURE-----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=56TH
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
Here is a driver core new api for 6.14-rc3 that is being added to allow
platform devices from stop being abused. It adds a new "faux_device"
structure and bus and api to allow almost a straight or simpler
conversion from platform devices that were not really a platform device.
It also comes with a binding for rust, with an example driver in rust
showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now through
their different development trees, in time for 6.15-rc1. We have a
number that are already reviewed and tested, but adding those
conversions now doesn't seem right. For now, no one is using this, and
it passes all build tests from 0-day and linux-next, so all should be
good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H+sQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yljfwCfdP8AvZeIdx89cqS0djspBSFLw1MAoIpq7Pbi
6BY+VOuDSZNdBKXFLR/x
=2qRL
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Here are some small serial driver fixes for some reported problems for
6.14-rc3. Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed 0-day
testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H/YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxAwCbBpzMC3xtuqSw/PCrFGbBNeMVuQcAoKtoQYWr
Zro9O1hxTOfbFNeHEVtj
=XvcE
-----END PGP SIGNATURE-----
Merge tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported problems.
Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed
0-day testing"
* tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix fifo underflow on flush
serial: 8250_pnp: Remove unneeded ->iotype assignment
serial: 8250_platform: Remove unneeded ->iotype assignment
serial: 8250_of: Remove unneeded ->iotype assignment
serial: port: Make ->iotype validation global in __uart_read_properties()
serial: port: Always update ->iotype in __uart_read_properties()
serial: port: Assign ->iotype correctly when ->iobase is set
serial: sc16is7xx: Fix IRQ number check behavior
Here are some small USB driver fixes, and new device ids, for 6.14-rc3.
Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H/9Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym9YgCeIG0YNJa3Bb8gVQOnNwbOXzSpt84AniHDxqW9
EMqZy36ZYzee04t1wR0b
=La/t
-----END PGP SIGNATURE-----
Merge tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU registered
-----BEGIN PGP SIGNATURE-----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=ThZf
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
clear its removal from that queue is atomic
-----BEGIN PGP SIGNATURE-----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=J43o
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Clarify what happens when a task is woken up from the wake queue and
make clear its removal from that queue is atomic
* tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Clarify wake_up_q()'s write to task->wake_q.next
breakage has been fixed in the meantime
- Teach objtool to ignore dangling jump table entries added by Clang
-----BEGIN PGP SIGNATURE-----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=fVLM
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Move a warning about a lld.ld breakage into the verbose setting as
said breakage has been fixed in the meantime
- Teach objtool to ignore dangling jump table entries added by Clang
* tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Move dodgy linker warn to verbose
objtool: Ignore dangling jump table entries
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
- Small set of pKVM improvements and cleanups.
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module infrastructure
cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmev2ykUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMvxwf/bw2u08moAYWAjJLROFvfiKXnznLS
iqJ2+jcw0lJ7wDqm4Zw8M5t74Rd+y5yzkLkZOyjav9yBB09zRkItiTHljCNMOQnt
2QptBa3CUN8N+rNnvVRt6dMkhw7z6n7eoFRSIDY2Y9PgiTapbFXPV1gFkMPO6+0f
SyF4LCr0iuDkJdvGAZJAH/Mp8nG6dv/A6a+Q+R1RkbKn9c2OdWw4VMfhIzimFGN6
0RFjbfXXvyO0aU/W/VHwvvuhcjGkAZWfHDdaTXqbvSMhayW562UPVMVBwXdVBmDj
Dk1gCKcbm4WyktbXYW6iOYj3MgdK96eI24ozps4R0aDexsrTRY4IfH4KEg==
=20Ql
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
-----BEGIN PGP SIGNATURE-----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=5mdK
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
* tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: convert irq_lock to raw spinlock
um: virtio_uml: use raw spinlock
um: virt-pci: don't use kmalloc()
um: fix execve stub execution on old host OSs
um: properly align signal stack on x86_64
um: avoid copying FP state from init_task
um: add back support for FXSAVE registers
- Enable resize on mmap() error
When a process mmaps a ring buffer, its size is locked and resizing is
disabled. But if the user passes in a wrong parameter, the mmap() can fail
after the resize was disabled and the mmap() exits with error without
reenabling the ring buffer resize. This prevents the ring buffer from ever
being resized after that. Reenable resizing of the ring buffer on mmap()
error.
- Have resizing return proper error and not always -ENOMEM
If the ring buffer is mmapped by one task and another task tries to resize
the buffer it will error with -ENOMEM. This is confusing to the user as
there may be plenty of memory available. Have it return the error that
actually happens (in this case -EBUSY) where the user can understand why
the resize failed.
- Test the sub-buffer array to validate persistent memory buffer
On boot up, the initialization of the persistent memory buffer will do a
validation check to see if the content of the data is valid, and if so, it
will use the memory as is, otherwise it re-initializes it. There's meta
data in this persistent memory that keeps track of which sub-buffer is the
reader page and an array that states the order of the sub-buffers. The
values in this array are indexes into the sub-buffers. The validator
checks to make sure that all the entries in the array are within the
sub-buffer list index, but it does not check for duplications.
While working on this code, the array got corrupted and had duplicates,
where not all the sub-buffers were accounted for. This passed the
validator as all entries were valid, but the link list was incorrect and
could have caused a crash. The corruption only produced incorrect data,
but it could have been more severe. To fix this, create a bitmask that
covers all the sub-buffer indexes and set it to all zeros. While iterating
the array checking the values of the array content, have it set a bit
corresponding to the index in the array. If the bit was already set, then
it is a duplicate and mark the buffer as invalid and reset it.
- Prevent mmap()ing persistent ring buffer
The persistent ring buffer uses vmap() to map the persistent memory.
Currently, the mmap() logic only uses virt_to_page() to get the page
from the ring buffer memory and use that to map to user space. This works
because a normal ring buffer uses alloc_page() to allocate its memory.
But because the persistent ring buffer use vmap() it causes a kernel
crash. Fixing this to work with vmap() is not hard, but since mmap() on
persistent memory buffers never worked, just have the mmap() return
-ENODEV (what was returned before mmap() for persistent memory ring
buffers, as they never supported mmap. Normal buffers will still allow
mmap(). Implementing mmap() for persistent memory ring buffers can wait
till the next merge window.
- Fix polling on persistent ring buffers
There's a "buffer_percent" option (default set to 50), that is used to
have reads of the ring buffer binary data block until the buffer fills to
that percentage. The field "pages_touched" is incremented every time a
new sub-buffer has content added to it. This field is used in the
calculations to determine the amount of content is in the buffer and if it
exceeds the "buffer_percent" then it will wake the task polling on the
buffer.
As persistent ring buffers can be created by the content from a previous
boot, the "pages_touched" field was not updated. This means that if a task
were to poll on the persistent buffer, it would block even if the buffer
was completely full. It would block even if the "buffer_percent" was zero,
because with "pages_touched" as zero, it would be calculated as the buffer
having no content. Update pages_touched when initializing the persistent
ring buffer from a previous boot.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ7DtcxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmTQAQD1W/xHfS8yLw7BQBjM+6kqExdrKI/D
Z378Et0LSWjZBQD/VtPKiSjLhhNgLUBy5fAWS5t4X/DZ49GKhTA36AzGHwE=
=1b+2
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace ring buffer fixes from Steven Rostedt:
- Enable resize on mmap() error
When a process mmaps a ring buffer, its size is locked and resizing
is disabled. But if the user passes in a wrong parameter, the mmap()
can fail after the resize was disabled and the mmap() exits with
error without reenabling the ring buffer resize. This prevents the
ring buffer from ever being resized after that. Reenable resizing of
the ring buffer on mmap() error.
- Have resizing return proper error and not always -ENOMEM
If the ring buffer is mmapped by one task and another task tries to
resize the buffer it will error with -ENOMEM. This is confusing to
the user as there may be plenty of memory available. Have it return
the error that actually happens (in this case -EBUSY) where the user
can understand why the resize failed.
- Test the sub-buffer array to validate persistent memory buffer
On boot up, the initialization of the persistent memory buffer will
do a validation check to see if the content of the data is valid, and
if so, it will use the memory as is, otherwise it re-initializes it.
There's meta data in this persistent memory that keeps track of which
sub-buffer is the reader page and an array that states the order of
the sub-buffers. The values in this array are indexes into the
sub-buffers. The validator checks to make sure that all the entries
in the array are within the sub-buffer list index, but it does not
check for duplications.
While working on this code, the array got corrupted and had
duplicates, where not all the sub-buffers were accounted for. This
passed the validator as all entries were valid, but the link list was
incorrect and could have caused a crash. The corruption only produced
incorrect data, but it could have been more severe. To fix this,
create a bitmask that covers all the sub-buffer indexes and set it to
all zeros. While iterating the array checking the values of the array
content, have it set a bit corresponding to the index in the array.
If the bit was already set, then it is a duplicate and mark the
buffer as invalid and reset it.
- Prevent mmap()ing persistent ring buffer
The persistent ring buffer uses vmap() to map the persistent memory.
Currently, the mmap() logic only uses virt_to_page() to get the page
from the ring buffer memory and use that to map to user space. This
works because a normal ring buffer uses alloc_page() to allocate its
memory. But because the persistent ring buffer use vmap() it causes a
kernel crash.
Fixing this to work with vmap() is not hard, but since mmap() on
persistent memory buffers never worked, just have the mmap() return
-ENODEV (what was returned before mmap() for persistent memory ring
buffers, as they never supported mmap. Normal buffers will still
allow mmap(). Implementing mmap() for persistent memory ring buffers
can wait till the next merge window.
- Fix polling on persistent ring buffers
There's a "buffer_percent" option (default set to 50), that is used
to have reads of the ring buffer binary data block until the buffer
fills to that percentage. The field "pages_touched" is incremented
every time a new sub-buffer has content added to it. This field is
used in the calculations to determine the amount of content is in the
buffer and if it exceeds the "buffer_percent" then it will wake the
task polling on the buffer.
As persistent ring buffers can be created by the content from a
previous boot, the "pages_touched" field was not updated. This means
that if a task were to poll on the persistent buffer, it would block
even if the buffer was completely full. It would block even if the
"buffer_percent" was zero, because with "pages_touched" as zero, it
would be calculated as the buffer having no content. Update
pages_touched when initializing the persistent ring buffer from a
previous boot.
* tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Update pages_touched to reflect persistent buffer content
tracing: Do not allow mmap() of persistent ring buffer
ring-buffer: Validate the persistent meta data subbuf array
tracing: Have the error of __tracing_resize_ring_buffer() passed to user
ring-buffer: Unlock resize on mmap error
