pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250704075411.3218059-1-sakari.ailus@linux.intel.com
This patch adds firmware binary and GPU model naming support for
Mali-Gx20 and Mali-Gx25 GPUs.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-8-karunika.choo@arm.com
As the FLUSH_MEM and FLUSH_PT MMU_AS commands are deprecated in GPUs
from Mali-Gx20 onwards, this patch adds support for performing cache
maintenance via the FLUSH_CACHES command in GPU_COMMAND in place of
FLUSH_MEM and FLUSH_PT commands.
Mali-Gx10 and Mali-Gx15 GPUs also has support for the FLUSH_CACHES
command and will also use this by default going forward.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-7-karunika.choo@arm.com
In certain scenarios, it is possible for multiple cache flushes to be
requested before the previous one completes. This patch introduces the
cache_flush_lock mutex to serialize these operations and ensure that
any requested cache flushes are completed instead of dropped.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Co-developed-by: Dennis Tsiang <dennis.tsiang@arm.com>
Signed-off-by: Dennis Tsiang <dennis.tsiang@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-6-karunika.choo@arm.com
Mali-Gx15 introduces a new GPU_FEATURES register that provides
information about GPU-wide supported features. The register value will
be passed on to userspace via gpu_info.
Additionally, Mali-Gx15 presents an 'Immortalis' naming variant
depending on the shader core count and presence of Ray Intersection
feature support.
This patch adds:
- support for correctly identifying the model names for Mali-Gx15 GPUs.
- arch 11.8 FW binary support
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-5-karunika.choo@arm.com
This patch adds GPU model name and FW binary support for Mali-G710,
Mali-G510, and Mali-G310.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-4-karunika.choo@arm.com
This patch replaces the panthor_model structure with a simple switch
case based on the product_id which is in the format of:
((arch_major << 24) | product_major)
This simplifies comparison and allows extending of the function to
accommodate naming differences based on supported GPU features.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-3-karunika.choo@arm.com
This patch introduces panthor_hw and moves the initialization of the
gpu_info struct into panthor_hw.c in preparation of handling future GPU
register and naming changes.
Future GPU support can be added by extending panthor_gpu_info_init()
with the necessary register reads behind GPU architecture version guards
if the change is minor. For more complex changes, the function can be
forked and the appropriate function will need to be called based on the
GPU architecture version.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-2-karunika.choo@arm.com
Update driver to use the "multi" variants of MIPI functions which
facilitate improved error handling and cleaner driver code.
Remove information from a comment which was made obsolete by commit
994ea402c7 ("drm/panel: Rename Sony ACX424 to Novatek NT35560"), which
determined that this driver supports the Novatek NT35560 panel
controller.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250731032343.1258366-4-me@brighamcampbell.com
Create mipi_dsi_dcs_read_multi(), which accepts a mipi_dsi_multi_context
struct for improved error handling and cleaner panel driver code.
Create mipi_dsi_dcs_write_var_seq_multi() and
mipi_dsi_generic_write_var_seq_multi() macros which allow MIPI panel
drivers to write non-constant data to display controllers.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250731032343.1258366-3-me@brighamcampbell.com
Convert the Renesas RZ/G2L MIPI DSI Encoder driver from
SET_RUNTIME_PM_OPS() to RUNTIME_PM_OPS() and pm_ptr(). This lets us
drop the __maybe_unused annotations from its runtime suspend and resume
callbacks, and reduces kernel size in case CONFIG_PM is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/cdfc1b8ec9e62553654639b9e9026bfed8dd07d1.1752086582.git.geert+renesas@glider.be
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250703183447.2073902-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Include <linux/property.h> to declare device_property_read_u32() and
<linux/mod_devicetable.h> to declare struct of_device_id. Avoids the
dependency on the backlight header to include it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250812081118.221103-1-tzimmermann@suse.de
The assignment of zero to variable is redundant as the following
continue statement loops back to the start of the loop where
ret is assigned a new value from the return to the call to
get_parent_dss_vp. Remove assignment.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250702084844.966199-1-colin.i.king@gmail.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
TIDSS uses crtc_* fields to propagate its registers and set the
clock rates. So set the CRTC modesetting timing parameters with
the adjusted mode when needed, to set correct values.
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250624080402.302526-1-j-choudhary@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
While the cdns-dsi does not support DSI burst mode, the burst mode is
essentially DSI event mode with more versatile clocking and timings.
Thus cdns-dsi doesn't need to fail if the DSI peripheral driver requests
MIPI_DSI_MODE_VIDEO_BURST.
In my particular use case, this allows the use of ti-sn65dsi83 driver.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-15-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The driver currently expects the pixel clock and the HS clock to be
compatible, but the DPHY PLL doesn't give very finely grained rates.
This often leads to the situation where the pipeline just fails, as the
resulting HS clock is just too off.
We could change the driver to do a better job on adjusting the DSI
blanking values, hopefully getting a working pipeline even if the pclk
and HS clocks are not exactly compatible. But that is a bigger work.
What we can do easily is to see in .atomic_check() what HS clock rate we
can get, based on the pixel clock rate, and then convert the HS clock
rate back to pixel clock rate and ask that rate from the crtc. If the
crtc has a good PLL (which is the case for TI K3 SoCs), this will fix
any issues wrt. the clock rates.
If the crtc cannot provide the requested clock, well, we're no worse off
with this patch than what we have at the moment.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-14-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The timings calculation gets it wrong for DSI event mode, resulting in
too large hbp value. Fix the issue by taking into account the
pulse/event mode difference.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-13-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The driver does all the calculations and programming with video timings
(hftp, hbp, etc.) instead of the modeline values (hsync_start, ...).
Thus it makes sense to use struct videomode instead of struct
drm_display_mode internally.
Switch to videomode and do some cleanups in cdns_dsi_mode2cfg() along
the way.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-12-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The driver tries to calculate the value for REG_WAKEUP_TIME. However,
the calculation itself is not correct, and to add on it, the resulting
value is almost always larger than the field's size, so the actual
result is more or less random.
According to the docs, figuring out the value for REG_WAKEUP_TIME
requires HW characterization and there's no way to have a generic
algorithm to come up with the value. That doesn't help at all...
However, we know that the value must be smaller than the line time, and,
at least in my understanding, the proper value for it is quite small.
Testing shows that setting it to 1/10 of the line time seems to work
well. All video modes from my HDMI monitor work with this algorithm.
Hopefully we'll get more information on how to calculate the value, and
we can then update this.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-11-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The Cadence DSI requires negative syncs from the incoming video signal,
but at the moment that requirement is not expressed in any way. If the
crtc decides to use positive syncs, things break down.
Use the adjusted_mode in atomic_check to set the sync flags to negative
ones.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-10-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
cdns_dsi_adjust_phy_config() is called from cdns_dsi_check_conf(), which
is called from .atomic_check(). It checks the DSI htotal and adjusts it
to align on the DSI lane boundary by changing hfp and then recalculating
htotal and HS clock rate.
This has a few problems.
First is the fact that the whole thing is not needed: we do not need to
align on the lane boundary. The whole frame is sent in HS mode, and it
is fine if the line's last byte clock tick fills, say, only 2 of the 4
lanes. The next line will just continue from there. Assuming the
DSI timing values have been calculated to match the incoming DPI stream,
and the HS clock is compatible with the DPI pixel clock, the "uneven"
DSI lines will even out when multiple lines are being sent.
But we could do the align, aligning is not a problem as such. However,
adding more bytes to the hfp, as the function currently does, makes the
DSI line time longer, so the function then adjusts the HS clock rate.
This is where things fail: we don't know what rates we can get from the
HS clock, and at least in TI K3 SoC case the rates are quite coarsely
grained. Thus small adjustment to hfp will lead to a big change in HS
clock rate, and things break down.
We could do a loop here, adjusting hfp, adjusting clock, checking clock
rate, adjusting hfp again, etc., but considering that the whole
adjustment shouldn't be needed at all, it's easier to just remove the
function.
Something like this function should be added back later, when adding
burst mode support, but that's a bigger change and I don't think this
function would help that work in any way.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-9-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
cdns_dsi_mode2cfg() calculates the dsi timings, but for some reason
doesn't set the htotal based on those timings. It is set only later, in
cdns_dsi_adjust_phy_config().
As cdns_dsi_mode2cfg() is the logical place to calculate it, let's move
it there. Especially as the following patch will remove
cdns_dsi_adjust_phy_config().
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-8-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The docs say about mode_valid():
"it is not allowed to look at anything else but the passed-in mode, and
validate it against configuration-invariant hardware constraints"
We're doing a lot more than just looking at the mode. The main issue
here is that we're doing checks based on the pixel clock, before we know
what the pixel clock from the crtc actually is.
So, drop the cdns_dsi_check_conf() call from .mode_valid().
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-7-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The driver checks if "DPI(HFP) > DSI(HSS+HSA+HSE+HBP)", and rejects the
mode if not.
However, testing shows that this doesn't hold at all. I can set the hfp
to very small values, with no errors. The feedback from the HW team also
was that the check is not right, although it's not clear if there's a
way to validate the FIFO emptying.
The check rejects quite a lot of modes, apparently for no good reason,
so drop the check.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-6-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
With recent change the cdns_dsi_check_conf() is always called with
mode_valid_check = true. We can thus remove all the code related to the
"false" paths.
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-5-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Remove extra line at the end of the file.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-4-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Use the crtc_* fields from drm_display_mode, instead of the "logical"
fields. This shouldn't change anything in practice, but afaiu the crtc_*
fields are the correct ones to use here.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-3-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fix missing includes and struct declarations. Even if these don't cause
any compile issues at the moment, it's good to have them correct.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-2-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Use the "adjusted_mode" for the dsi configuration check, as that is the
more appropriate display_mode for validation, and later bridge enable.
Also, fix the mode_valid_check parameter from false to true, as the dsi
configuration check is taking place during the check-phase, and the
crtc_* mode values are not expected to be populated yet.
Fixes: a53d987756 ("drm/bridge: cdns-dsi: Move DSI mode check to _atomic_check()")
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-1-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
This is inteded to address concerns that users might get cryptic error
messages or a failure to boot if they set nouveau.config=NvGspRm=0 on
the kernel command line and their gpu requires gsp (Ada or newer).
With this patch, that configuration results in error messages like this:
nouveau 0000:01:00.0: gsp: Failed to load required firmware for device.
nouveau 0000:01:00.0: gsp ctor failed: -22
nouveau 0000:01:00.0: probe with driver nouveau failed with error -22
When nouveau fails to load like this, we still fall back to the generic
framebuffer device, so users will still have limited graphical output.
Signed-off-by: Mel Henning <mhenning@darkrefraction.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250811213843.4294-4-mhenning@darkrefraction.com
This option was originally intoduced because the GSP code path was
not well tested and we wanted to leave it up to distros which code path
they shipped by default. By now though, the GSP path is probably better
tested than the old firmware eg. Fedora ships GSP by default and we
generally run CTS on GSP. We've always been GSP-only on Ada and later.
So, this path removes the option and effectively sets the option to
always on. We still fall back to the old firmware if GSP is not found.
This change only affects Turing and Ampere.
Users can still set nouveau.config=NvGspRm=0 on the kernel command line
to force using the old firmware on Turing/Ampere.
Signed-off-by: Mel Henning <mhenning@darkrefraction.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250811213843.4294-2-mhenning@darkrefraction.com
Always set the RMDevidCheckIgnore registry key for GSP-RM so that it
will continue support newer variants of already supported GPUs.
GSP-RM maintains an internal list of PCI IDs of GPUs that it supports,
and checks if the current GPU is on this list. While the actual GPU
architecture (as specified in the BOOT_0/BOOT_42 registers) determines
how to enable the GPU, the PCI ID is used for the product name, e.g.
"NVIDIA GeForce RTX 5090".
Unfortunately, if there is no match, GSP-RM will refuse to initialize,
even if the device is fully supported. Nouveau will get an error
return code, but by then it's too late. This behavior may be corrected
in a future version of GSP-RM, but that does not help Nouveau today.
Fortunately, GSP-RM supports an undocumented registry key that tells it
to ignore the mismatch. In such cases, the product name returned will
be a blank string, but otherwise GSP-RM will continue.
Unlike Nvidia's proprietary driver, Nouveau cannot update to newer
firmware versions to keep up with every new hardware release. Instead,
we can permanently set this registry key, and GSP-RM will continue
to function the same with known hardware.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250808191340.1701983-1-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The sharp-memory driver currently reads the vaddr field from the GME
buffer object directly. This only works because GEM code 'automagically'
sets vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
v2:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250627152327.8244-1-tzimmermann@suse.de
Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The repaper driver currently reads the vaddr field from the GME buffer
object directly. This only works because GEM code 'automagically' sets
vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
v2:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250627152422.8399-1-tzimmermann@suse.de
The debug logging in gud_disconnect() adds zero detail and is
unnecessary, as it only prints the function name.
The same functionality can be achieved by using ftrace, and is
highlighted by checkpatch, stating the same.
This patch removes the debug log in the gud_disconnect() function.
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250721232210.12578-1-rubenru09@aol.com
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEE67dNfPFP+XUaA73mB9BFOha3NhcFAmiX9oQUHGxlbi5icm93
bkBpbnRlbC5jb20ACgkQB9BFOha3NhfNYg/+Lh6tMh84N0ziNpX31mWCJChlGJXq
7vR4J8E9GSO7Ixz9HGGQxvPAXp/FNuOCYJ6LNOpyzauoxwtF836MABGhQveBUzfu
/0wmkN/DEUb0FTRHPR1LiGDarl42g8CsaQfrCzAvO9WUviOHOicfM6duk5hVItQd
5QotmHuLJtEbwxnYdVZW5FbXFMFU/C1z/8zk3VcoW8H2gV3qR/MXuzyOcp8C2pdU
x7/i5FlAOEabhL8liOx1x8OcCo5NGne+eV7tr1SE6Duykg9aIL3o/KdfQhEI7uF0
f8Ya7Sol0d6kFTJNnSOPWa5QNkLOW5ib4iTyDkvaFHY8CeakMLNjIkdcLXKRsYCs
yWszWtUMECC/GprDwl5Aq77a54p/2gp6Ntekhn1aWw0/jhBIf/ZTAiFA2OcG3Ikd
RWAn3veaVRNxrHA6Ck7US/sJAiE3VNod+eIFA+/4NaQEpVJdtHlkwNwjwgF6pwaM
PakryoT4v6ZfC7FfCBH3wMSlWmO5612zNqQM35yWuGMXMBHZKcuSQUliXkN5KfpX
/ShjYbBUhiK6MiswZaXsWEdocqjX4t4QHRGAi75mGDpBey7gd62RQH+8R5bcLiVH
258Y/Zg+yvHrcq3rmpK0tF/nTI+WrXlcsv6sGHW/QJ3Fet0iXlI9kLtzRANwkcYk
Zfvwnp9BP3Q6FRg=
=1iYa
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"tools/power turbostat: version 2025.09.09
- Probe and display L3 Cache topology
- Add ability to average an added counter (useful for pre-integrated
"counters", such as Watts)
- Break the limit of 64 built-in counters
- Assorted bug fixes and minor feature tweaks"
* tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.09.09
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
tools/power turbostat: standardize PER_THREAD_PARAMS
tools/power turbostat: Fix DMR support
tools/power turbostat: add format "average" for external attributes
tools/power turbostat: delete GET_PKG()
tools/power turbostat: probe and display L3 cache topology
tools/power turbostat: Support more than 64 built-in-counters
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
tools/power turbostat: Fix bogus SysWatt for forked program
tools/power turbostat: Handle cap_get_proc() ENOSYS
tools/power turbostat: Fix build with musl
tools/power turbostat: verify arguments to params --show and --hide
tools/power turbostat: regression fix: --show C1E%
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
-----BEGIN PGP SIGNATURE-----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=VUGL
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmiXjqoACgkQEsHwGGHe
VUrD0Q/9FPOeQ6sNazmk4oC0d7BrgTmjiSR9yHsgbHzLRilx7ncBNLS1DAwVBKNS
JPpHUEWdIjY7cURYFxihSPvjG1d+yCoKHkn/HlGXpVNm2bfN8M5ejlqd/yskGwa1
9eNzPCB08+dD0zJhEq6teDn5cAGqeLmdiQa+h3UZ6Wt5BOGv2NAMpF8cgObGC6le
2ednA+lHPlQdIIJCH+HmmHIvVHXAGiuisfdD6eVtec28LU+V/vNPkGnmss616dui
48O2+FPaBnN+0tlNmn/bdisjAUWpYPYA9sto2tk/wKXZM+OW5rIlB/NhzDvvjd1c
1kHX05bzH9aKIQQ4d+UUTnnlqY/biG80UWg1BPgJzW/ko6rtdVP8kZ5xQXQsEJ15
gihYMdcyb3TwDxXkEqWVH0INmAmIC0daCvrDgiXcyOlPPoBdh9IYE0YxMAY+GSF0
RN55ZSMc0l2p6qL70WeWau5JJCplNjT6YyfOX8PeTRpkpoZIUlNVZyJcItaJMVbf
cbi1SE9TRzoHgenDOBZZVQX54X1FlZg6WupHEoN8amIBEh6rw3E6biKmQDcXLa8n
9tex9t7OgyFcn8iLFrUVxzssQi+2+kt6tvTeJds4qG4U4dvWm8o1z4Lja3WkQCp2
6It8J2PS1KJYVfffJz0SXFex9SKImsgBCSLn/U6qNJF9mAUG9/4=
=pdid
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
-----BEGIN PGP SIGNATURE-----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=Xpyt
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Prevent a futex hash leak due to different mm lifetimes
* tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Move futex cleanup to __mmdrop()
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
Signed-off-by: Len Brown <len.brown@intel.com>
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Original-patch-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
