With the incoming large data folios support, the structure name
btrfs_subpage is no longer correct, as for we can have multiple blocks
inside a large folio, and the block size is still page size.
So to follow the schema of iomap, rename btrfs_subpage to
btrfs_folio_state, along with involved enums.
There are still exported functions with "btrfs_subpage_" prefix, and I
believe for metadata the name "subpage" will stay forever as we will
never allocate a folio larger than nodesize anyway.
The full cleanup of the word "subpage" will happen in much smaller steps
in the future.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike the iomap_folio_state structure, the btrfs_subpage structure has a
lot of extra sub-bitmaps, namely:
- writeback sub-bitmap
- locked sub-bitmap
iomap_folio_state uses an atomic for writeback tracking, while it has
no per-block locked tracking.
This is because iomap always locks a single folio, and submits dirty
blocks with that folio locked.
But btrfs has async delalloc ranges (for compression), which are queued
with their range locked, until the compression is done, then marks the
involved range writeback and unlocked.
This means a range can be unlocked and marked writeback at seemingly
random timing, thus it needs the extra tracking.
This needs a huge rework on the lifespan of async delalloc range
before we can remove/simplify these two sub-bitmaps.
- ordered sub-bitmap
- checked sub-bitmap
These are for COW-fixup, but as I mentioned in the past, the COW-fixup
is not really needed anymore and these two flags are already marked
deprecated, and will be removed in the near future after comprehensive
tests.
Add related comments to indicate we're actively trying to align the
sub-bitmaps to the iomap ones.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs happily but incorrectly accepts the `-o compress=zlib+foo` and similar
options with any random suffix.
Fix that by explicitly checking the end of the strings.
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are many options making the parsing a bit lengthy. Factor the
compress options out into a helper function. The next patch is going to
harden this function.
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Another batch of pointer parameter constifications. This is for clarity
and minor addition to type safety. There are no observable effects in the
assembly code and .ko measured on release config.
Signed-off-by: David Sterba <dsterba@suse.com>
When debugging/detecting outlier commit stalls, having an indicator that
we are currently in a long commit critical section can be very useful.
Extend the commit_stats sysfs file to also include the current commit
critical section duration.
Since this requires storing the last commit start time, use that rather
than a separate stack variable for storing the finished commit durations
as well.
This also requires slightly moving up the timing of the stats updating
to *inside* the critical section to avoid the transaction T+1 setting
the critical_section_start_time to 0 before transaction T can update its
stats, which would trigger the new ASSERT. This is an improvement in and
of itself, as it makes the stats more accurately represent the true
critical section time. It may be yet better to pull the stats up to where
start_transaction gets unblocked, rather than the next commit, but this
seems like a good enough place as well.
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace struct embedding with union to enable safe type conversion in
btrfs_backref_node, tree_block and mapping_node.
Adjust function calls to use the new unified API, eliminating redundant
parameters.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
mkfs.btrfs up to v4.14 actually can leave a chunk inside the reserved
space when invoked with `-m single`, fixed by 997f9977c24397eb6980bb9
("mkfs: Prevent temporary system chunk to use space in reserved 1M
range") released with v4.15.
Signed-off-by: Dan Johnson <ComputerDruid@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_backref_link_edge() is always called with the LINK_LOWER argument.
We can simplify it and remove the LINK_LOWER and LINK_UPPER macros
completely.
The last call with LINK_UPPER was removed with commit 0097422c0d
("btrfs: remove clone_backref_node() from relocation").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a common error path where we abort the transaction, but like this
in case we get a transaction abort stack trace we don't know exactly which
previous function call failed. Instead abort the transaction after any
function call that returns an error, so that we can easily identify which
function failed.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a common error path where we abort the transaction, but like this
in case we get a transaction abort stack trace we don't know exactly which
previous function call failed. Instead abort the transaction after any
function call that returns an error, so that we can easily identify which
function failed.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we find an unexpected generation for the extent buffer we are cloning
at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the
transaction, meaning we allow to persist metadata with an unexpected
generation. Instead of warning only, abort the transaction and return
-EUCLEAN.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of having a common btrfs_abort_transaction() call for when any of
the two btrfs_inc_ref() calls fail, move the btrfs_abort_transaction() to
happen immediately after each one of the calls, so that when analyzing a
stack trace with a transaction abort we know which call failed.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Transaction aborts should be done next to the place the error happens,
which was not done in add_block_group_free_space().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Transaction aborts should be done next to the place the error happens,
which was not done in remove_block_group_free_space().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this fuzzy logic at btrfs_recover_log_trees() where we don't
abort the transaction and exit immediately after each function call that
returned an error, and instead have if-then-else logic or check if the
previous function call returned success before calling the next function.
Make the flow more straightforward by immediately aborting the transaction
and exiting after each function call failure. This also allows to avoid
two consecutive if statements that test the same conditions:
if (!ret && wc.stage == LOG_WALK_REPLAY_ALL) {
(...)
}
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to call btrfs_release_path() before calling
btrfs_init_root_free_objectid() as we have released the path already at
the top of the loop and the previous call to fixup_inode_link_counts()
also releases the path. So remove it to simplify the code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we failed walking a log tree during replay, we have a missing
transaction abort to prevent committing a transaction where we didn't
fully replay all the changes from a log tree and therefore can leave the
respective subvolume tree in some inconsistent state. So add the missing
transaction abort.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a single line doing a transaction abort in case either we got an
error from btrfs_get_fs_root() different from -ENOENT or we got an error
from btrfs_pin_extent_for_log_replay(), making it hard to figure out which
function call failed when looking at a transaction abort massages and
stack trace in dmesg. Change this to have an explicit transaction abort
for each one of the two cases.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_should_periodic_reclaim() is not used outside of space-info.c so
make it static and remove the prototype from space-info.h.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When deciding if a zoned filesystem is reaching the threshold to reclaim
data block groups, look at the size of the filesystem not to potentially
total available size of all drives in the filesystem.
Especially if a filesystem was created with mkfs' -b option, constraining
it to only a portion of the block device, the numbers won't match and
potentially garbage collection is kicking in too late.
Fixes: 3687fcb075 ("btrfs: zoned: make auto-reclaim less aggressive")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a common error path where we abort the transaction, but like this
in case we get a transaction abort stack trace we don't know exactly which
previous function call failed. Instead abort the transaction after any
function call that returns an error, so that we can easily identify which
function failed.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The label is only used once and we can instead return directly where it's
used, besides the fact that all we do under the label is to return the
value of 'ret'. So get rid of the label and return directly.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of having a common btrfs_abort_transaction() call for when any of
the two btrfs_dec_ref() calls fail, move the btrfs_abort_transaction() to
happen immediately after each one of the calls, so that when analysing a
stack trace with a transaction abort we know which call failed.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of having a common btrfs_abort_transaction() call for when either
insert_tree_block_ref() failed or when insert_extent_data_ref() failed,
move the btrfs_abort_transaction() to happen immediately after each one of
those calls, so that when analysing a stack trace with a transaction abort
we know which call failed.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of having a common btrfs_abort_transaction() call for when either
btrfs_orphan_add() failed or when btrfs_add_link() failed, move the
btrfs_abort_transaction() to happen immediately after each one of those
calls, so that when analysing a stack trace with a transaction abort we
know which call failed.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
- Fix timerlat with use of FORTIFY_SOURCE
FORTIFY_SOURCE was added to the stack tracer where it compares the
entry->caller array to having entry->size elements.
timerlat has the following:
memcpy(&entry->caller, fstack->calls, size);
entry->size = size;
Which triggers FORTIFY_SOURCE as the caller is populated before the
entry->size is initialized.
Swap the order to satisfy FORTIFY_SOURCE logic.
- Add down_write(trace_event_sem) when adding trace events in modules
Trace events being added to the ftrace_events array are protected by
the trace_event_sem semaphore. But when loading modules that have
trace events, the addition of the events are not protected by the
semaphore and loading two modules that have events at the same time
can corrupt the list.
Also add a lockdep_assert_held(trace_event_sem) to
_trace_add_event_dirs() to confirm its held when iterating the list.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaH06gBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoJsAP0a+/E0f+5g7O/OtYPVEDSCREv1vj9c
3dr0iWopqaOC7gEAw8Vc5iWIHKcB/JuJ+GqALoutL+lihruG26MWkFFsOgU=
=zH5J
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix timerlat with use of FORTIFY_SOURCE
FORTIFY_SOURCE was added to the stack tracer where it compares the
entry->caller array to having entry->size elements.
timerlat has the following:
memcpy(&entry->caller, fstack->calls, size);
entry->size = size;
Which triggers FORTIFY_SOURCE as the caller is populated before the
entry->size is initialized.
Swap the order to satisfy FORTIFY_SOURCE logic.
- Add down_write(trace_event_sem) when adding trace events in modules
Trace events being added to the ftrace_events array are protected by
the trace_event_sem semaphore. But when loading modules that have
trace events, the addition of the events are not protected by the
semaphore and loading two modules that have events at the same time
can corrupt the list.
Also add a lockdep_assert_held(trace_event_sem) to
_trace_add_event_dirs() to confirm it is held when iterating the
list.
* tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add down_write(trace_event_sem) when adding trace event
tracing/osnoise: Fix crash in timerlat_dump_stack()
omap: add missing error check and fix PM disable in probe error
path.
stm32: unmap DMA buffer on transfer failure and use correct
device when mapping and unmapping during transfers.
-----BEGIN PGP SIGNATURE-----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=iAV9
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"omap:
- add missing error check
- fix PM disable in probe error path
stm32:
- unmap DMA buffer on transfer failure
- use correct device when mapping and unmapping during transfers"
* tag 'i2c-for-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: unmap DMA mapped buffer
i2c: stm32: fix the device used for the DMA map
i2c: omap: Fix an error handling path in omap_i2c_probe()
i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()
in __sev_es_nmi_complete() despite the function being annotated with
'noinstr'. As all functions in that source file are noinstr, exclude the
whole file from KCSAN in the Makefile to cure it.
-----BEGIN PGP SIGNATURE-----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=zL4b
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 bug fix from Thomas Gleixner:
"A single fix for a GCC wreckage, which emits a KCSAN instrumentation
call in __sev_es_nmi_complete() despite the function being annotated
with 'noinstr'.
As all functions in that source file are noinstr, exclude the whole
file from KCSAN in the Makefile to cure it"
* tag 'x86-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Work around broken noinstr on GCC
correctly on 64-bit kernels. sys_futex_wait() expects a struct
__kernel_timespec for the timeout, but the selftest uses struct timespec,
which is the original 32-bit non 2038 compliant variant. Fix it up by
converting the callsite supplied timespec to a __kernel_timespec and hand
that into the syscall.
-----BEGIN PGP SIGNATURE-----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=zIcB
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix for the futex selftest code to make 32-bit user space
work correctly on 64-bit kernels.
sys_futex_wait() expects a struct __kernel_timespec for the timeout,
but the selftest uses struct timespec, which is the original 32-bit
non 2038 compliant variant.
Fix it up by converting the callsite supplied timespec to a
__kernel_timespec and hand that into the syscall"
* tag 'locking-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Convert 32-bit timespec to 64-bit version for 32-bit compatibility mode
counter nr_uninterruptible to an unsigned int. Due to the fact that the
counters are not updated on migration of a uninterruptble task to a
different CPU, these counters can exceed INT_MAX. The counter is cast to
long in the load average calculation, which means that the cast expands
into negative space resulting in bogus load average values. Convert it back
to unsigned long to fix this.
-----BEGIN PGP SIGNATURE-----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=Aqcr
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for the scheduler.
A recent commit changed the runqueue counter nr_uninterruptible to an
unsigned int. Due to the fact that the counters are not updated on
migration of a uninterruptble task to a different CPU, these counters
can exceed INT_MAX.
The counter is cast to long in the load average calculation, which
means that the cast expands into negative space resulting in bogus
load average values.
Convert it back to unsigned long to fix this.
* tag 'sched-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Change nr_uninterruptible type to unsigned long
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmh6uxMTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXsDqB/9EZrNSmMhoctjhBwrEjilRPaBHaD0f
7AGbdvs78sZDC2FMQeeqVeUDgv7nhZoT9B/cjSNkAXF8LdtEXOpiYY0sqG+fO8c9
2DHBLBBGbFg+/SI+2SLzgrg8ixplnEF2HPR3pIgpmvqOKJcBd6+LnlyXs3xuBhc/
XCerEwjHDpC27YQf3ZFvgomH1rw4w0yENZaz/ztpca41GScmbBq6K9c0SAzherBJ
IDcbSUHNkT9LoFdXG9gawwX++XrBsfsKwlfAX6lYuzj+rdY5uxJaqMBg5sIA5Huh
aRLB9gXHQVABTqp73kG76ZtBdmMsd2S1JF0YdRxdsL91MQ1C0n7AW9iK
=0Qh6
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Select use CONFIG_SYSFB only if EFI is enabled (Michael Kelley)
- An assorted set of fixes to remove warnings for missing export.h
header inclusion (Naman Jain)
- An assorted set of fixes for when Linux run as the root partition
for Microsoft Hypervisor (Mukesh Rathor, Nuno Das Neves, Stanislav
Kinsburskii)
- Fix the check for HYPERVISOR_CALLBACK_VECTOR (Naman Jain)
- Fix fcopy tool to handle irregularities with size of ring buffer
(Naman Jain)
- Fix incorrect file path conversion in fcopy tool (Yasumasa Suenaga)
* tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: fcopy: Fix irregularities with size of ring buffer
PCI: hv: Use the correct hypercall for unmasking interrupts on nested
x86/hyperv: Expose hv_map_msi_interrupt()
Drivers: hv: Use nested hypercall for post message and signal event
x86/hyperv: Clean up hv_map/unmap_interrupt() return values
x86/hyperv: Fix usage of cpu_online_mask to get valid cpu
PCI: hv: Don't load the driver for baremetal root partition
net: mana: Fix warnings for missing export.h header inclusion
PCI: hv: Fix warnings for missing export.h header inclusion
clocksource: hyper-v: Fix warnings for missing export.h header inclusion
x86/hyperv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR
tools/hv: fcopy: Fix incorrect file path conversion
Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
Here are some USB and Thunderbolt driver fixes for reported problems for
6.16-rc6. Included in here are:
- Thunderbolt fixes for some much-reported issues
- dwc2 driver fixes
- dwc3 driver fixes
- new usb-serial driver device ids
- gadgetfs configfs fix
- musb driver fix
- USB hub driver fix
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaHzIcQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymOLwCgjIvqamsd5wUy+hM1O9172VI1JcMAn1c9p7bX
HEWrRaqCJrrM0u3g195m
=brtL
-----END PGP SIGNATURE-----
Merge tag 'usb-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for reported problems
for 6.16-rc6. Included in here are:
- Thunderbolt fixes for some much-reported issues
- dwc2 driver fixes
- dwc3 driver fixes
- new usb-serial driver device ids
- gadgetfs configfs fix
- musb driver fix
- USB hub driver fix
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: hub: Don't try to recover devices lost during warm reset.
usb: dwc2: gadget: Fix enter to hibernation for UTMI+ PHY
usb: dwc3: qcom: Don't leave BCR asserted
USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition
USB: serial: ftdi_sio: add support for NDI EMGUIDE GEMINI
usb: gadget: configfs: Fix OOB read on empty string write
usb: musb: fix gadget state on disconnect
USB: serial: option: add Foxconn T99W640
thunderbolt: Fix bit masking in tb_dp_port_set_hops()
thunderbolt: Fix wake on connect at runtime
Here are two serial driver fixes for 6.16-rc6 that do:
- fix for the serial core OF resource leak
- pch_uart driver fix for a "incorrect variable" issue
Both of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaHzH1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykTAACfVcRCjjcynAmZ+Fxk96G08ULJKxQAoJfw7Xm6
3IStZZ/J8l7iOzHs/MfL
=LK6C
-----END PGP SIGNATURE-----
Merge tag 'tty-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two serial driver fixes for 6.16-rc6 that do:
- fix for the serial core OF resource leak
- pch_uart driver fix for a "incorrect variable" issue
Both of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pch_uart: Fix dma_sync_sg_for_device() nents value
serial: core: fix OF node leak
Here are some small driver fixes for the vchiq_arm staging driver:
- reverts of previous changes that turned out to caused problems.
- change to prevent a research leak
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaHzHKw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymrxgCeLpzzCQSZ5NQCUEEfSKuRGJaVoJoAn0lyY7bm
YK29QmrdA96E+h4v4W2f
=iSQD
-----END PGP SIGNATURE-----
Merge tag 'staging-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small driver fixes for the vchiq_arm staging driver:
- reverts of previous changes that turned out to caused problems.
- change to prevent a resource leak
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: Make vchiq_shutdown never fail
Revert "staging: vchiq_arm: Create keep-alive thread during probe"
Revert "staging: vchiq_arm: Improve initial VCHIQ connect"
