A PMSR request with an empty peers array is not a useful request and
weakens the cfg80211-to-driver contract by allowing start_pmsr() with
no target peer.
Reject empty peer lists before allocating the request object or calling
into the driver.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133717.93783-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PMSR FTM location request flags are syntactically valid, but they must
be rejected when the device capability does not advertise support for
them.
Return an error immediately after rejecting unsupported LCI or civic
location request bits so the request cannot reach the driver.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133710.93544-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PMSR FTM request parsing accepts preamble values outside the
enumerated nl80211 preamble range.
Reject out-of-range values before using them in the parser capability
bit test using the policy.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133703.93274-2-enderaoelyther@gmail.com
[drop unnecessary check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PMSR request parsing accepts missing or duplicated measurement type
entries in NL80211_PMSR_REQ_ATTR_DATA.
Track whether one measurement type was already provided, reject a
second one immediately, and return an error if the request data block
contains no measurement type at all.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133656.92900-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MBSSID transmitted-profile link IDs are valid only in the range
0..IEEE80211_MLD_MAX_NUM_LINKS - 1. Constrain the nl80211 policy to
reject out-of-range values during attribute validation.
Fixes: 37523c3c47 ("wifi: nl80211: add link id of transmitted profile for MLO MBSSID")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612131854.43575-4-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Validate each nested NL80211_ATTR_MBSSID_ELEMS entry as a well-formed
information-element stream before storing it for beacon construction.
RNR parsing already validates each nested blob with validate_ie_attr()
before storing it. Apply the same syntactic IE validation to MBSSID
entries before counting and copying their data and length pointers.
Fixes: dc1e3cb8da ("nl80211: MBSSID and EMA support in AP mode")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612131854.43575-3-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_mle_common_size() uses the first common-info octet as the
common information length for all known MLE types. However,
ieee80211_mle_size_ok() only validates that octet for Basic, Probe
Request, and TDLS MLEs.
Reconfiguration MLEs also skipped the length octet when calculating the
minimum common size, and Priority Access MLEs skipped validation of the
advertised common information length.
Account for the Reconfiguration common-info length octet and validate
the advertised common information length for all known MLE types. Keep
unknown-type handling unchanged.
Fixes: 0f48b8b88a ("wifi: ieee80211: add definitions for multi-link element")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260611173506.36838-2-enderaoelyther@gmail.com
[remove now misleading comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_inform_bss_frame_data() parses S1G beacons with the extension
frame layout, but still reads the TSF from the regular probe response
layout after the S1G branch. For S1G beacons that reads bytes at the
regular management-frame timestamp offset instead of the S1G timestamp.
Use the 32-bit S1G beacon timestamp and the S1G Beacon Compatibility
element's TSF completion field when informing an S1G BSS. Keep the
regular management-frame timestamp read in the non-S1G branch.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Tested-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Reviewed-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260611161943.91069-6-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer.
Fixes: 09a740ce35 ("mac80211: receive and process S1G beacons")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260611161943.91069-5-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR
entries than MBSSID entries.
The rejected RNR allocation has not been attached to the beacon data yet,
so free it before returning the error.
Fixes: dbbb27e183 ("cfg80211: support RNR for EMA AP")
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260610112208.1308-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rsi_prepare_beacon() copies the mac80211 beacon frame after
FRAME_DESC_SZ into a management skb whose usable tailroom may be smaller
than MAX_MGMT_PKT_SIZE after alignment.
Validate the beacon length against the actual tailroom before the copy
and skb_put(). Leave ownership of the management skb with the caller on
error, matching the existing rsi_send_beacon() cleanup path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260705084824.68105-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
libipw_rx() reads skb->data[hdrlen + 3] to extract the WEP key index in
both the software-decrypt key selection path and the hardware-decrypted
IV/ICV strip path. In both places the existing guard only checks
skb->len >= hdrlen + 3, which proves bytes up to hdrlen + 2 but not the
byte at hdrlen + 3.
Require hdrlen + 4 bytes before reading that item in both paths. This is
a local source-boundary check only; it does not change the key index
semantics.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260705083519.23567-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rsi_send_bgscan_probe_req() allocates room for struct
rsi_bgscan_probe plus MAX_BGSCAN_PROBE_REQ_LEN bytes, but copies the
entire mac80211-generated probe request skb after the fixed header.
The probe request length depends on scan IEs and is not checked
against the fixed firmware buffer.
Reject generated probe requests that do not fit the firmware command
buffer before copying them into the skb.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704011231.45593-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In monitor mode, lbs_hard_start_xmit() casts skb->data to a
radiotap TX header, skips that header, and then copies the 802.11
destination address from offset 4 in the remaining frame. The
generic length check only rejects zero-length and oversized skbs, so
a short monitor frame can be read past the end of the skb data.
Require enough bytes for the radiotap TX header and the destination
address field before using the monitor-mode header layout.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704011140.37639-1-pengpeng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
I have an hostapd setup with a
01:00.0 Network controller: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe
The setup work fine on 6.18.26-gentoo
It breaks on 6.18.33-gentoo (and still broken on 6.18.37)
I found an hint in dmesg:
On 6.18.26-gentoo I see:
May 31 15:48:45 trash01 kernel: ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected
On 6.18.33-gentoo I see:
May 31 15:22:57 trash01 kernel: ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0006 detected
The RF chipset seems badly detected.
The problem was the EEPROM which was badly initialized.
Probably the origin was in some PCI change but unfortunately I couldn't play
to bisect/reboot often the board with this card to do it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260703134932.3786771-1-clabbe@baylibre.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a netlink socket that owns a PMSR session is closed,
cfg80211_release_pmsr() clears the request's nl_portid and queues
pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously.
If the interface tears down concurrently, cfg80211_pmsr_wdev_down()
is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk)
to wait for any running work. The work function acquires wiphy_lock
via guard(wiphy) before calling process_abort.
This is a deadlock: wdev_down holds wiphy_lock and blocks inside
cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same
wiphy_lock. Neither thread can proceed.
The same deadlock is reachable from cfg80211_leave_locked(), which
calls cfg80211_pmsr_wdev_down() for all interface types under
wiphy_lock.
Fix this by converting pmsr_free_wk from a plain work_struct to a
wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running
work items, so the explicit guard(wiphy) in the work function is no
longer needed. wiphy_work_cancel() can be called safely while holding
wiphy_lock - since wiphy_lock prevents the work from running
concurrently, wiphy_work_cancel() never blocks, eliminating the
deadlock.
Remove the cancel_work_sync() for pmsr_free_wk from the
NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally
just before it, already cancels any pending work under wiphy_lock
via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down().
Fixes: 6dccbc9f3e ("wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down")
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703082523.2629324-1-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_gen_new_ie() copies ML probe response elements from
the parent frame when the parent EHT multi-link element has an
MLD ID matching the nontransmitted BSSID index.
The code only checked that the extension element had more than
one byte before calling ieee80211_mle_get_mld_id(). That helper
assumes a BASIC MLE with enough common info and documents that
callers must first use ieee80211_mle_type_ok().
Attack chain:
malicious AP sends a short EHT MLE in an MBSSID beacon.
cfg80211_inform_bss_frame_data() stores the copied IE buffer.
cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE.
cfg80211_gen_new_ie() sees the EHT MLE in the parent frame.
ieee80211_mle_get_mld_id() then reads past the IE boundary.
Validate the MLE type and size before reading the MLD ID. This
matches the contract required by the MLE helper and rejects the
short element before any internal MLE fields are accessed.
Cc: stable@vger.kernel.org
Fixes: 61dcfa8c2a ("wifi: cfg80211: copy multi-link element from the multi-link probe request's frame body to the generated elements")
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Link: https://patch.msgid.link/20260701093327.2680709-1-lihaofeng@kylinos.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rsi_hal_load_key() copies tx_mic_key and rx_mic_key from data[16] and
data[24] whenever key data is present. Those offsets are only part of
the 32-byte TKIP key layout. Shorter keys used by other ciphers, such as
CCMP, do not provide those bytes, so the unconditional copies can read
past the supplied key buffer.
Only copy the MIC keys for TKIP, and reject malformed TKIP keys that are
shorter than the expected 32-byte layout.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260701053414.34015-1-pengpeng@iscas.ac.cn
[drop useless length check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
p54_rx_eeprom_readback() copies the requested EEPROM slice out of a
device-supplied readback frame without checking that the skb actually holds
that many bytes. Commit da1b9a55ff ("wifi: p54: prevent buffer-overflow in
p54_rx_eeprom_readback()") closed the destination overflow by copying a
fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len),
but the source side is still unbounded: nothing verifies the frame is long
enough to supply that many bytes.
A malicious USB device can send a short frame whose advertised len matches
priv->eeprom_slice_size while the payload is truncated. The equality check
passes and memcpy() reads past the end of the skb, leaking adjacent heap:
BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
Read of size 1016 at addr ffff88800f077114 by task swapper/0/0
Call Trace:
<IRQ>
...
__asan_memcpy (mm/kasan/shadow.c:105)
p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005)
...
</IRQ>
The buggy address belongs to the object at ffff88800f0770c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 84 bytes inside of
allocated 704-byte region [ffff88800f0770c0, ffff88800f077380)
Check that the slice fits in the skb before copying.
Fixes: 7cb770729b ("p54: move eeprom code into common library")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20260628000510.4152481-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sta_remove_link() frees a removed MLO link's RX stats percpu buffer right
away, but defers only the link container to RCU:
sta_info_free_link(&alloc->info);
kfree_rcu(alloc, rcu_head);
The RX fast path reads link_sta under rcu_read_lock and writes the percpu
stats. A reader that resolved link_sta before the removal keeps the
pointer. The container stays alive from the kfree_rcu, so the read still
works. But the percpu block it points to is already freed. This needs
uses_rss. That is when pcpu_rx_stats exists.
The full STA teardown frees the deflink stats only after
synchronize_net(). The link removal path had no such barrier. The race is
hard to win in practice, but the free should still wait for RCU.
Free the link together with its data from a single RCU callback, so the
percpu block is reclaimed only after readers drain.
Fixes: c71420db65 ("wifi: mac80211: RCU-ify link STA pointers")
Link: https://lore.kernel.org/r/20260626080158.3589711-1-maoyixie.tju@gmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Co-developed-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260627083028.3826810-1-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_build_hdr() stores an ACK status frame before it has
finished all validation and header construction. If a later error path
is taken, the transmit skb is freed but the stored ACK status frame
remains in local->ack_status_frames.
This can happen for control port frames when the requested MLO link ID
does not match the link selected for a non-MLO station. Repeated
failures can fill the ACK status IDR and leave pending ACK frames until
hardware teardown.
Remove any stored ACK status frame before returning an error after it
has been inserted into the IDR.
Fixes: a729cff8ad ("mac80211: implement wifi TX status")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zhiling Zou <roxy520tt@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/9de0423da840e92084915b8f92e66a421245c4b8.1782462409.git.roxy520tt@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Injected HT and VHT rates store an MCS value in rates[0].idx rather
than an index into the legacy bitrate table. hwsim nevertheless passes
these rates to ieee80211_get_tx_rate() while generating monitor frames
and timestamps.
A crafted injected frame can therefore read beyond the bitrate table.
If the resulting bitrate is zero, mac80211_hwsim_write_tsf() also
divides by zero, as observed by syzbot.
Use ieee80211_get_tx_rate() only for legacy rates. The existing fallback
continues to supply a conservative bitrate where hwsim does not yet
calculate MCS rates.
Reported-by: syzbot+21629c14aa749636db9d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=21629c14aa749636db9d
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260628002537.23550-1-alhouseenyousef@gmail.com
[drop wrong Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
helper_firmware_cb() neglects to free the single-stage firmware image
after a successful async load, leading to a memory leak in the USB
firmware-download path.
Fix this memory leak by calling release_firmware() immediately after
lbs_fw_loaded() returns.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
the current wireless tree.
An x86_64 allyesconfig build showed no new warnings. As we do not have
compatible Libertas USB hardware for exercising this firmware-download
path, no runtime testing was able to be performed.
Fixes: 1dfba3060f ("libertas: move firmware lifetime handling to firmware.c")
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260624085343.575508-1-dawei.feng@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does
not wait for a running command_timer_fn() callback. lbtf_free_adapter()
runs on the teardown path right before ieee80211_free_hw() frees priv,
both in lbtf_remove_card() and in the probe error path. command_timer is
armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent.
command_timer_fn() dereferences priv. If a command times out as the
device is removed, command_timer_fn() runs concurrently with teardown and
dereferences priv after it has been freed.
This is the same use-after-free that commit 03cc8f90d0 ("wifi: libertas:
fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas
driver. The libertas_tf variant has the identical pattern and was left
unchanged. Use timer_delete_sync() so any in-flight callback completes
before priv is freed.
Fixes: 06b16ae531 ("libertas_tf: main.c, data paths and mac80211 handlers")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/178211481807.2212567.8773346114561900100@maoyixie.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_set_fils_discovery() calls kfree_rcu() on the old template
before allocating the replacement. If the kzalloc() then fails, it
returns -ENOMEM while link->u.ap.fils_discovery still points at the
object already queued for freeing. A later update or AP teardown
(ieee80211_stop_ap()) re-queues that same rcu_head; the second free is
caught by KASAN when the RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800c065280 by task swapper/0/0
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-96 of size 96
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().
Fixes: 3b1c256eb4 ("wifi: mac80211: fixes in FILS discovery updates")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260621093532.884188-2-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the old
template before allocating the replacement. If the kzalloc() then fails,
it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still points
at the object already queued for freeing. A later update or AP teardown
re-queues that same rcu_head; the second free is caught by KASAN when the
RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800d06f300 by task exploit/145
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-128 of size 128
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().
Fixes: 3b1c256eb4 ("wifi: mac80211: fixes in FILS discovery updates")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260621093532.884188-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by
the device straight to skb_put() on a fixed-size receive skb. A backend
reporting a length larger than the skb tailroom drives skb_put() past the
buffer end and hits skb_over_panic() -- a host-triggerable guest panic
(denial of service).
Clamp the length to the skb's available room before skb_put(). A
conforming device never reports more than the posted buffer size, so valid
frames are unaffected; a truncated over-report then fails the
length/header checks in hwsim_virtio_handle_cmd() and is dropped, so
truncating rather than dropping here cannot be turned into a parsing
problem.
Fixes: 5d44fe7c98 ("mac80211_hwsim: add frame transmission support over virtio")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260620-b4-disp-474bee37-v1-1-1a4d37f3e2d4@proton.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The memory allocated in the ipw2100_alloc_device() function is not freed
in some of the error paths in ipw2100_pci_init_one(). Fix that by
converting the direct return into a goto to the error path return.
The error path when pci_enable_device() fails cannot jump to fail, since
at this point priv is not set, so perform error handling inline.
Fixes: 2c86c27501 ("Add ipw2100 wireless driver.")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260620065242.93798-1-nihaal@cse.iitm.ac.in
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a
driver result notification while a scheduled scan request is present. The
work callback recovers the containing cfg80211_registered_device and then
locks the wiphy and walks the scheduled-scan request list.
wiphy_unregister() already makes the wiphy unreachable and drains rdev work
items before cfg80211_dev_free() can release the object, but it does not
drain sched_scan_res_wk. A queued or running result work item can therefore
cross the unregister/free boundary and access freed rdev state.
The buggy scenario involves two paths, with each column showing the order
within that path:
scheduled-scan result path: unregister/free path:
1. cfg80211_sched_scan_results() 1. interface teardown stops and
queues rdev->sched_scan_res_wk. removes the scheduled scan request.
2. cfg80211_wq starts the work 2. wiphy_unregister() drains other
item and recovers rdev. rdev work items.
3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and
and walks rdev state. frees rdev.
Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev
work items. cancel_work_sync() removes a pending result notification and
waits for an already running callback, so cfg80211_dev_free() cannot free
rdev while this work item is still active.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530
Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
cfg80211_sched_scan_results_wk+0x4a6/0x530
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x224/0x430
kasan_report+0xac/0xe0
lockdep_hardirqs_on_prepare+0xea/0x1a0
process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212)
lock_is_held_type+0x8f/0x100
worker_thread+0x5ad/0xfd0
__kthread_parkme+0xc6/0x200
kthread+0x31e/0x410
trace_hardirqs_on+0x1a/0x170
ret_from_fork+0x576/0x810
__switch_to+0x57e/0xe20
__switch_to_asm+0x33/0x70
ret_from_fork_asm+0x1a/0x30
Fixes: 807f8a8c30 ("cfg80211/nl80211: add support for scheduled scans")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260619162542.3878296-1-zzzccc427@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for
all probe failures. However, drv_data allocation and workqueue allocation
can fail before intf_work, autowakeup_work and sleep_work have been
initialized.
Do not enter the full remove path until the probe has reached the point
where those work items are set up. Return directly for drv_data allocation
failure, and use a small early cleanup path for workqueue allocation
failure.
This issue was found by our static analysis tool and then confirmed by
manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The
early probe exits should not call a common teardown path that assumes the
later work setup has already completed.
A QEMU PoC forced alloc_ordered_workqueue() to fail before the work
initializers are reached. The resulting fail path entered
rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with
rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack.
Fixes: 1ebbc48520 ("rt2x00: Introduce concept of driver data in struct rt2x00_dev.")
Fixes: 0439f5367c ("rt2x00: Move TX/RX work into dedicated workqueue")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260619073104.1809161-1-runyu.xiao@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order for the firmware to sleep, the driver has to confirm a
previously received sleep request. The normal sequence of evets goes
like this:
EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm
-> SLEEP -> EVENT_AWAKE -> AWAKE.
Before sending the sleep-confirm command, the driver must make sure
there are no commands either running or waiting to be completed.
mwifiex_ret_802_11_associate() unconditionally sets
ps_state = PS_STATE_AWAKE when it processes the association command
response, outside of the normal powersave management flow. If
EVENT_SLEEP arrives while the association command is in flight,
ps_state is PRE_SLEEP when the association command response is parsed,
and the forced AWAKE overwrites it. The deferred sleep-confirm is
never sent.
A subsequent scan_start command is correctly acknowledged, but the
firmware doesn't generate scan_result events. The scan request never
finishes, and additional requests from userspace fail with -EBUSY.
After testing on both IW412 and W8997, I could only trigger the bug on
the IW412 and observed the firmwares behave differently. On the IW412
the firmware still sends EVENT_SLEEP while the authentication /
association process is ongoing. A W8997 under the same
conditions seems to suppress power-save for the duration of the
association, so PRE_SLEEP never coincided with the association response
even after extended periods of testing using the loops
described below (>12hours).
On the IW412, the delay between commands that triggers an EVENT_SLEEP
was empirically determined to be ~20ms. This delay can naturally occur
when the driver is outputting debugging information
(debug_mask = 0x00000037), in which situation the busy scans issue is
repeatable while running "test 1)" as described below. If the delay
between commands is less than ~20ms, the firmware stays awake and
the issue was not reproducible running the same test.
The host_mlme=false path also behaves differently. In this case, the
entire authentication / association transaction is executed by one
command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit
EVENT_SLEEP while the command is running.
Remove the assignment so the ps_state is only manipulated in the paths
that are related to powersave event handling and on the main workqueue
for correct sleep confirmation.
The following loop tests were performed (with debugging output enabled):
1) force roaming between two AP's, one 5GHz and one 2.4GHz, same
SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s
between iterations.
2) force a disconnection to AP 1 and a connection to AP 2, test
scan. Use wpa_cli to trigger the connection changes, sleep 2s
between iterations.
Each test ran in each device for at least 3 hours.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20260612122547.1586872-2-rafael@beims.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ieee80211_nan_sched_cfg structure is too large to keep on the
per thread stack:
net/mac80211/nan.c:251:5: error: stack frame size (1560) exceeds limit (1536) in 'ieee80211_nan_set_local_sched' [-Werror,-Wframe-larger-than]
251 | int ieee80211_nan_set_local_sched(struct ieee80211_sub_if_data *sdata,
Allocate this dynamically using kmalloc_obj() to reduce the stack
usage of this function to a manageable 344 bytes for the same
configuration.
Fixes: 589c06e8fd ("wifi: mac80211: add NAN local schedule support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260611130100.3387714-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When host MLME is enabled, mwifiex_cfg80211_authenticate() transmits the
authentication frame on a remain-on-channel (ROC) reservation so that the
frame is sent on the target BSS's channel. The ROC is only configured
when priv->auth_flag is zero.
priv->auth_flag is set to HOST_MLME_AUTH_PENDING when the auth frame is
queued and advances to HOST_MLME_AUTH_DONE once authentication
completes. It is only cleared back to zero on a disconnect, deauth or
timeout path; nothing clears it when an association succeeds. It therefore
stays at HOST_MLME_AUTH_DONE for the whole connected session.
When the station later roams to a BSS on a different channel, the next
authentication finds auth_flag != 0, skips the ROC setup, and the auth
frame is transmitted on the currently-associated channel instead of the
target's channel. Authentication times out on the new AP and the device
stays connected to the original AP.
Gate the ROC setup on HOST_MLME_AUTH_PENDING instead of on auth_flag
being completely clear. This re-arms the remain-on-channel for every new
authentication attempt, while still suppressing a redundant ROC during
the multi-frame SAE exchange, where auth_flag stays PENDING between the
commit and confirm frames.
This change was tested in 3 different devices:
Verdin AM62 (IW412 SD-UART) - (16.92.21.p142)
Verdin iMX8MM (W8997 SD-SD) - (16.68.1.p197)
Verdin iMX8MP (W8997 SD-UART) - (16.92.21.p137)
There following loop tests were performed:
1) force roaming between two AP's, one 5GHz and one 2.4GHz, same
SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s
between iterations.
2) force a disconnection to AP 1 and a connection to AP 2, test
scan. Use wpa_cli to trigger the connection changes, sleep 2s
between iterations.
Each test ran in each device for at least 3 hours.
Fixes: 36995892c2 ("wifi: mwifiex: add host mlme for client mode")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260610150021.1018611-1-rafael@beims.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth: virtio_net: disable cb when NAPI is busy-polled
- eth: lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth: mlx5e: fix use-after-free of metadata_dst on RX SC delete
- eth: enetc: check the number of BDs needed for xdp_frame
- eth: fbnic: don't cache shinfo across skb realloc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=E5mR
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and batman-adv.
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth:
- virtio_net: disable cb when NAPI is busy-polled
- lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth:
- mlx5e: fix use-after-free of metadata_dst on RX SC delete
- enetc: check the number of BDs needed for xdp_frame
- fbnic: don't cache shinfo across skb realloc"
* tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net/mlx5: HWS, fix matcher leak on resize target setup failure
net/sched: hhf: clear heavy-hitter state on reset
net/sched: dualpi2: clear stale classification on filter miss
net/sched: act_bpf: use rcu_dereference_bh() to read the filter
selftests: drv-net: tso: don't touch dangerous feature bits
cxgb4: Fix decode strings dump for T6 adapters
virtio_net: disable cb when NAPI is busy-polled
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
selftests: net: bump default cmd() timeout to 20 seconds
bridge: stp: Fix a potential use-after-free when deleting a bridge
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
net: gianfar: dispose irq mappings on probe failure and device removal
net: lan743x: Initialize eth_syslock spinlock before use
net: libwx: fix VMDQ mask for 1-queue mode
net: airoha: fix max receive size configuration
fsl/fman: Free init resources on KeyGen failure in fman_init()
netfilter: nftables: restrict checkum update offset
netfilter: nftables: restrict linklayer and network header writes
netfilter: nfnetlink_queue: restrict writes to network header
netfilter: nft_fib: reject fib expression on the netdev egress hook
...
* Add MFD mailing list to MAINTAINERS
-----BEGIN PGP SIGNATURE-----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=9mYD
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
- Add MFD mailing list to MAINTAINERS
* tag 'mfd-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
MAINTAINERS: Add a mailing list entry to MFD
- fix pointers after potential skb reallocs (5 patches)
- dat: ensure accessible eth_hdr proto field
-----BEGIN PGP SIGNATURE-----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=H0KB
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260630' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfix, all by Sven Eckelmann:
- fix pointers after potential skb reallocs (5 patches)
- dat: ensure accessible eth_hdr proto field
* tag 'batadv-net-pullrequest-20260630' of https://git.open-mesh.org/batadv:
batman-adv: dat: ensure accessible eth_hdr proto field
batman-adv: bla: reacquire gw address after skb realloc
batman-adv: dat: acquire ARP hw source only after skb realloc
batman-adv: gw: acquire ethernet header only after skb realloc
batman-adv: access unicast_ttvn skb->data only after skb realloc
batman-adv: retrieve ethhdr after potential skb realloc on RX
====================
Link: https://patch.msgid.link/20260630134430.85786-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hws_bwc_matcher_move() allocates a replacement matcher before setting it
as the resize target. If mlx5hws_matcher_resize_set_target() fails, the
replacement matcher is not attached anywhere and is leaked.
Fix the leak by destroying the replacement matcher before returning from
the resize-target failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
mlx5 HWS-capable device to test with, no runtime testing was able to be
performed.
Fixes: 2111bb970c ("net/mlx5: HWS, added backward-compatible API handling")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260629064049.3852759-1-dawei.feng@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- bootconfig: Fix NULL-pointer arithmetic
Fix undefined pointer arithmetic in xbc_snprint_cmdline() when probing
the buffer length with NULL and size 0. Track the written length as a
size_t instead to prevent build-time UBSan/FORTIFY_SOURCE failures.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmpEY1sbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bxAgH/A+wNARuaA8k3qHdRrzm
eoKNfwPNc2C+QwPMsYVgk0aa1HaZWwuJ7FJQn0P0z3uXO6uvDg5S3q2LTyyLyoTy
3DFcyrAQ1eIk5tj88LTmLHq5a6Jntsl+OZMXy3gU8fVJV8sQFYt1fovHctn0oaY3
Yw5iwGkVzwFMh4BwZn9RfH73zECeUticJeO4qQadRApMsrWgNDz7f+P8YzcUxbBx
BLBE4hnfKA5awRoYaOqGQ5jHsPoyj5GwwDEt+KU412M/E85rQAfGDyw5RXwqnb91
rs7w6EJ8nfEGWDpqJTpZQxZbpvNc88cnh08lnxyFKGWiOBvV7G/qRNXG4AmI2e//
oh4=
=t5+P
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fix from Masami Hiramatsu:
- bootconfig: Fix NULL-pointer arithmetic
Fix undefined pointer arithmetic in xbc_snprint_cmdline() when
probing the buffer length with NULL and size 0. Track the written
length as a size_t instead to prevent build-time UBSan/FORTIFY_SOURCE
failures.
* tag 'bootconfig-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: fix NULL-pointer arithmetic in xbc_snprint_cmdline()
-----BEGIN PGP SIGNATURE-----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=cwEO
-----END PGP SIGNATURE-----
Merge tag 'nf-26-06-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*.
Due to bug volume the plan is to make a second *net* pull request
this Friday.
1) Zero nf_conntrack_expect at allocation to prevent uninitialized data
leaks to userspace. Add missing exp->dir initialization.
2) Prevent out-of-bounds writes in nft_set_pipapo caused by inconsistent
clones during allocation failures. Fail operations if the clone enters an
error state. This was a day-0 bug.
3) Fix use-after-free race between ipset dump and array resizing. Protect
array pointer access with rcu_read_lock(). From Xiang Mei. Bug existed
since v4.20.
4) Validate skb_dst() exists before access in nf_conntrack_sip.
This Prevent crash when called from tc ingress or openvswitch.
From Pablo Neira Ayuso. Bug added in 4.3 when ovs gained support
for conntrack helpers.
5) Cap the maximum number of expectations to NF_CT_EXPECT_MAX_CNT during
userspace helper policy updates. Also from Pablo.
6) Prevent NULL pointer dereference in nft_fib on netdev egress hooks. Add
nft_fib_netdev_validate() to restrict fib expressions to appropriate
netdev hooks. Restrict nft_fib_validate() to IPv4, IPv6, and INET
protocols. From Theodor Arsenij Larionov-Trichkine.
Bug was exposed in v5.16 when egress hooks got added.
7) Restrict nfnetlink_queue writes to network headers. Validate IP/IPv6
header length and disable extension headers or IP option modifications.
Disable bridge modification for now, its unlikely anyone is using this.
8) Restrict arbitrary writes to link-layer and network headers in nftables.
Prevent link-layer modifications from spilling into network headers.
Prevent writes to IP version and length fields.
9) Restrict L3 checksum update offset to IPv4. Else csum offset can be
used to munge arbitrary header offsets, rendering the previous change moot.
These three patches are follow-ups to a 7.1 change that disabled
header rewrite ability in unprivileged network namespaces.
unprivileged netns support is not yet enabled again here.
netfilter pull request nf-26-06-30
* tag 'nf-26-06-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nftables: restrict checkum update offset
netfilter: nftables: restrict linklayer and network header writes
netfilter: nfnetlink_queue: restrict writes to network header
netfilter: nft_fib: reject fib expression on the netdev egress hook
netfilter: nfnetlink_cthelper: cap to maximum number of expectation per master
netfilter: nf_conntrack_sip: validate skb_dst() before accessing it
netfilter: ipset: fix race between dump and ip_set_list resize
netfilter: nft_set_pipapo: don't leak bad clone into future transaction
netfilter: nf_conntrack_expect: zero at allocation time
====================
Link: https://patch.msgid.link/20260630045243.2657-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
HHF reset does not clear the classifier state used to identify heavy
hitters. Packets after reset can therefore be scheduled using flow
history from before the reset.
The reset operation should return the qdisc to an empty state.
Clear the heavy-hitter classifier tables when HHF is reset.
Fixes: 10239edf86 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DualPI2 leaves previous classification state attached to an skb when
filter classification returns no match. The enqueue path can then act
on stale state from an earlier classification attempt.
A filter miss should fall back to the default class without reusing old
per-packet classification data.
Initialize the classification result to CLASSIC before running the
classifier. Explicit L4S, priority, and successful filter
classification can still override that default.
Fixes: 8f9516daed ("sched: Add enqueue/dequeue of dualpi2 qdisc")
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- fprobe: Fix stability and spelling typos
. Fix NULL pointer dereference in fprobe_fgraph_entry(): Prevent general
protection faults by checking shadow-stack reservation bounds. Skip
mid-flight registered fprobes that were not counted during sizing.
- eprobe: Fix string pointer extraction
. Correct the casting of string pointers read from the ringbuffer to
prevent truncation of base event pointer variables when dereferencing
FILTER_PTR_STRING fields.
- tracing/probes: Clean up argument parsing and BTF helper logic
. Make the $ prefix mandatory for comm access: Require the $ prefix for
special fetcharg variables like $comm and $COMM, preventing naming
conflicts with regular BTF-based event fields.
. Fix double addition of offset for @+FOFFSET: Clear the temporary offset
variable after setting the FETCH_OP_FOFFS instruction to avoid applying
the offset multiple times.
. Remove WARN_ON_ONCE from parse_btf_arg: Prevent triggering a kernel warning
via user-space input when creating a kprobe event on a raw address.
. Fix typo in a log message: Correct a spelling error ("$-valiable") in
trace probe log messages.
- samples/trace_events: Improve error checking
. Validate the thread pointer returned from kthread_run() in the trace
events sample code to properly handle thread creation failures.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmpD3BEbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8beGkIAMbMZ7zoCIlKEfZaRIHS
ms2BTUfh5mkyoIJ+dWXel9UmsvL2kj4FzKWt+gYKsYuxqu3o62BGIkaNffXJEKnc
qRvgVxsxOeJqXjmnSDjVhukBDGb8X1SaRd4DZMuEO77d2nYztYO61ejkF94S6WaQ
VE46pFu0FWGZvFGyyfrCEYFIkFF+4scsDB4ncHLR8u5tNqzg7NaUdvK+tc88/Exk
k7+qqo8aCwMjd8wkfsyCH6DvQmmN5sKcCEvOL8zzE6D4xfX9kRd0//FBZPDmGUC4
lQ2jNhMYhdLdOP+I7dIi+FBaY0Lye8mwHrnrqI2DSvYO4cb4LQvn2hexKLbN2dZE
dt8=
=3Y70
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
"fprobe fixes and spelling typos:
- Fix NULL pointer dereference in fprobe_fgraph_entry(). Prevent
general protection faults by checking shadow-stack reservation
bounds. Skip mid-flight registered fprobes that were not counted
during sizing.
eprobe: fix string pointer extraction
- Correct the casting of string pointers read from the ringbuffer to
prevent truncation of base event pointer variables when
dereferencing FILTER_PTR_STRING fields.
tracing/probes: clean up argument parsing and BTF helper logic
- Make the $ prefix mandatory for comm access: Require the $ prefix
for special fetcharg variables like $comm and $COMM, preventing
naming conflicts with regular BTF-based event fields.
- Fix double addition of offset for @+FOFFSET: Clear the temporary
offset variable after setting the FETCH_OP_FOFFS instruction to
avoid applying the offset multiple times.
- Remove WARN_ON_ONCE from parse_btf_arg: Prevent triggering a kernel
warning via user-space input when creating a kprobe event on a raw
address.
- Fix typo in a log message: Correct a spelling error ("$-valiable")
in trace probe log messages.
samples/trace_events: improve error checking
- Validate the thread pointer returned from kthread_run() in the
trace events sample code to properly handle thread creation
failures"
* tag 'probes-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Make the $ prefix mandatory for comm access
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
tracing/probes: Fix double addition of offset for @+FOFFSET
tracing: eprobe: read the complete FILTER_PTR_STRING pointer
tracing/events: Fix to check the simple_tsk_fn creation
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
tracing: probes: fix typo in a log message
tcf_bpf_act() can run from the tc egress path, which holds only
rcu_read_lock_bh(), but reads prog->filter with rcu_dereference() and
trips lockdep:
WARNING: suspicious RCU usage
net/sched/act_bpf.c:47 suspicious rcu_dereference_check() usage!
1 lock held by syz.2.1588/12756:
#0: (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit net/core/dev.c:4792
tcf_bpf_act+0x6ae/0x940 net/sched/act_bpf.c:47
tcf_classify+0x6e4/0x1080 net/sched/cls_api.c:1860
sch_handle_egress net/core/dev.c:4545 [inline]
__dev_queue_xmit+0x2185/0x2c00 net/core/dev.c:4808
packet_sendmsg+0x3dfa/0x5120 net/packet/af_packet.c:3114
The other tc actions and cls_bpf already use rcu_dereference_bh() here.
Do the same.
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://patch.msgid.link/20260629154112.1164986-1-rhkrqnwk98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
query_nic_features() detects which offloads depend on tx-gso-partial
by enabling everything, turning tx-gso-partial off, and seeing which
active features drop out. Enabling all hw features is dangerous:
we may end up enabling rx-fcs and loopback for example. For the
ice driver we end up getting into problems with feature dependencies
so the cleanup isn't successful either, and the test exits with
rx-fcs and loopback enabled.
Scope the feature probing just to segmentation bits.
Fixes: 266b835e5e ("selftests: drv-net: tso: enable test cases based on hw_features")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260629233923.2151144-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Depending on the value of chip_version, the correct decode set is selected.
However, the subsequent matching with the t4 encoding type in the if-else
block results in a reassignment, which leads to the loss of support for
t6_decode as well as reinitializing of values t4_decode and t5_decode.
The component history shows that the if-else block previously used for
this purpose, as well as the execution order, was not affected by the
change.
Furthermore, it is suggested by the execution order that the scenario with
overwriting and loss of support will be implemented.
Delete the if-else block.
Fixes: 6df397539c ("cxgb4: Update correct encoding of SGE Ingress DMA States for T6 adapter")
Signed-off-by: Gleb Markov <markov.gi@npc-ksb.ru>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20260629130856.1168-1-markov.gi@npc-ksb.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When busy-poll is active, napi_schedule_prep() returns false in
virtqueue_napi_schedule(), so virtqueue_disable_cb() is skipped.
The device may keep firing irqs until reaches virtqueue_napi_complete().
Under load (received == budget), it will lead to a large number
of spurious interrupts.
Fix it by disabling the callback at the virtnet_poll() entry.
This keeps the callback off while we poll and it is re-enabled by
virtqueue_napi_complete() when going idle.
Fixes: ceef438d61 ("virtio_net: remove custom busy_poll")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Longjun Tang <tanglongjun@kylinos.cn>
Link: https://patch.msgid.link/20260629024230.37325-1-lange_tang@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete()
while holding addr_wq_lock. However, timer_delete() does not guarantee that
a currently running timer handler has completed.
This allows a race with sctp_addr_wq_timeout_handler(), where the handler
may still run after addr_waitq has been freed, acquire addr_wq_lock, and
access freed memory, leading to a use-after-free.
Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This
guarantees that any in-flight timer handler has finished and prevents the
timer from being re-armed during teardown, making subsequent cleanup safe.
Fixes: 4db67e8086 ("sctp: Make the address lists per network namespace")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/5dc95f295bdb5c3f60e880dd9aa5112dc5c071cc.1782757874.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
