Yuyang Huang says:
====================
ipv6: mcast: annotate data races in /proc/net/igmp6
/proc/net/igmp6 walks IPv6 multicast memberships under RCU without
holding idev->mc_lock, taking a lockless snapshot of two fields that
writers update under the lock: mca_flags and mca_work.timer.expires.
Patch 1 adds WRITE_ONCE() to all mca_flags update sites and READ_ONCE()
to the procfs reader. Patch 2 does the same for the timer.expires read
in the procfs path.
====================
Link: https://patch.msgid.link/20260609081113.7613-1-sigefriedhyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/proc/net/igmp6 walks IPv6 multicast memberships under RCU and reads
mca_work.timer.expires to print the remaining multicast timer. The
delayed-work timer can be updated concurrently.
Annotate the intentional lockless procfs snapshot with READ_ONCE().
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609081113.7613-3-sigefriedhyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/proc/net/igmp6 walks IPv6 multicast memberships under RCU and
prints mca_flags without holding idev->mc_lock. The multicast paths
update the field while holding idev->mc_lock.
Annotate this intentional lockless snapshot with READ_ONCE() and the
matching writers with WRITE_ONCE().
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609081113.7613-2-sigefriedhyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca says:
====================
net: remove tls_toe
This series removes the tls_toe feature, its single user (chtls), and
cleans up the EXPORT_SYMBOL()s that no other module requires.
Driver changes only compile-tested.
====================
Link: https://patch.msgid.link/cover.1781165969.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tls_toe feature and its single user (chelsio chtls) have been
unmaintained for multiple years. It also hooks into the core of the
TCP implementation, and bypasses most of the networking stack.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/1f30e73275c07bf879f547589872d0916025a52e.1781165969.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 throws ASSERT_RTNL() warnings on timestamp config, because
it tries to update features. mlx5e_hwtstamp_set() calls
netdev_update_features().
I missed this while grepping the drivers because tsconfig goes
through ndo_hwtstamp_set/get, not ethtool ops, even tho the new
uAPI is in ethtool Netlink. We could add a dedicated opt out bit
for mlx5, but NDOs were not supposed to be part of the ethtool locking
conversion in the first place.
The mlx5 features update is related to the "compressed CQE" format
which lacks timestamp, apparently. See commit c0194e2d0e ("net/mlx5e:
Disable rxhash when CQE compress is enabled").
Fixes: f9a3e05114 ("net: ethtool: optionally skip rtnl_lock on Netlink path for SET ops")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260611200355.2020663-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_tunnel_xmit() runs locklessly (dev->lltx == true).
ipgre_err() and ipip_err() also run locklessly.
We need to add READ_ONCE() and WRITE_ONCE() annotations
around t->err_count and t->err_time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260611165247.2710257-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function checks the HSR_PT_SLAVE_A and HSR_PT_SLAVE_B bitmaps
for emptiness right before calling find_last_bit().
This pass may be avoided, because if the bitmap is empty, the
find_last_bit() returns >= HSR_SEQ_BLOCK_SIZE
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Link: https://patch.msgid.link/20260609171545.1051322-1-ynorov@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A comment in drivers/net/ethernet/sis/sis900.h incorrectly refers to
CONFIG_VLAN_802_1Q instead of CONFIG_VLAN_8021Q. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260609175656.20574-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor updates to the XDP metadata documentation:
- s/union/struct/ for xsk_tx_metadata
- document nested request and completion metadata fields
- point capability queries at the xsk-features attribute
- fix grammar in the XDP RX metadata guide
- typos
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260609201224.1191391-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enabling the RX Buffer Unavailable (RBUE) interrupt is counterproductive
and can trigger a MAC interrupt storm under heavy RX pressure. When the
DMA runs out of RX descriptors it fires RBUE continuously until software
refills the ring.
However, RBUE is redundant: the normal RX completion interrupt (RIE)
already triggers NAPI, which processes completed descriptors and refills
the ring, causing the DMA to resume. The RBUE handler itself only sets
handle_rx - the same outcome as RIE.
On Agilex5 under heavy RX pressure, the MAC interrupt (which includes
RBUE) was observed firing 1,821,811,555 times against only 2,618,627
actual RX completions - a ~695x ratio - confirming the severity of the
storm.
RBUE does not provide OOM recovery. If page_pool is exhausted,
stmmac_rx_refill() cannot advance the DMA tail pointer, the DMA stays
suspended, and RBUE fires again on the next NAPI completion - a storm
with no forward progress. This patch trades that storm for a clean
stall with the same RX outcome. Proper OOM recovery is a pre-existing
gap outside the scope of this fix.
Note: as a consequence of disabling RBUE, the rx_buf_unav_irq ethtool
counter will always read 0 on XGMAC2 devices. This behaviour is already
inconsistent across DWMAC core versions.
Remove RBUE from XGMAC_DMA_INT_DEFAULT_EN and XGMAC_DMA_INT_DEFAULT_RX
to prevent the interrupt storm while keeping normal RX handling intact.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260609121703.9736-1-muhammad.nazim.amirul.nazle.asmade@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ACCEPT and DONE are the two downcalls of the handshake genl
family, both intended for use by the trusted handshake agent
(tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has
no privilege check at all.
The fd-lookup in handshake_nl_done_doit() only confirms that
some pending handshake request exists for the supplied sockfd;
it does not authenticate the sender. An unprivileged process
that guesses or observes a valid sockfd can therefore submit
a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel
consumer to proceed as if the handshake succeeded. A non-zero
status on a forged DONE tears down a legitimate in-flight
handshake before tlshd can report its real result.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260609141831.90694-1-cel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tushar Vyavahare says:
====================
selftests/xsk: simplify UMEM setup
This series simplifies UMEM handling in selftests/xsk.
It centralizes UMEM property setup through helpers, moves UMEM ownership
from ifobject to socket-owned state, and normalizes umem_size/mmap_size
usage across the touched paths.
====================
Link: https://patch.msgid.link/20260608130938.958793-1-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UMEM teardown currently recomputes the munmap() length from frame
geometry, shared-UMEM adjustment, and hugepage rounding. This duplicates
setup-time logic in cleanup and relies on re-deriving the mapping size
instead of using the size originally established for the mapping.
Store the final mapping length in xsk_umem_info as mmap_size when the
UMEM mapping is created, and use that value during teardown.
Also join the RX worker thread before cleanup in the single-thread
path. This establishes synchronization before reading umem->mmap_size
in teardown and avoids a potential visibility race.
This removes duplicated size arithmetic in cleanup and makes munmap()
use the canonical mapping size recorded at setup time.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-5-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace remaining open-coded `umem->num_frames * umem->frame_size`
calculations in test_xsk.c with the existing `umem_size()` helper.
This keeps UMEM size computation centralized, avoids duplicated arithmetic,
and improves readability with no intended behavior change.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-4-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move UMEM ownership from ifobject to xsk_socket_info and access it
through xsk->umem.
Allocate one shared umem_real in ifobject_create() and let all
sockets reference it through xsk->umem, while keeping ownership in
xsk_arr[0]. Keep the existing goto-based error path in
ifobject_create() and free the allocation once in ifobject_delete().
Reset the existing umem_real in __test_spec_init() with memset()
instead of reallocating it.
Preserve shared-UMEM behavior by copying RX UMEM state into a TX-local
UMEM state in thread_common_ops_tx() and reset base_addr/next_buffer
before TX socket configuration.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-3-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UMEM properties are set via open-coded field assignments in multiple test
paths, which makes updates noisy and error-prone.
Introduce two helpers to set UMEM properties through a single interface.
This keeps setup logic consistent across tests and makes future refactoring
simpler.
No functional behavior change is intended.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-2-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a tdc test that checks the act_pedit extended L4 header mode does not
edit a packet whose IPv4 protocol does not match the selected transport
header.
The test installs an ingress pedit rule that sets the UDP destination
port, then injects a TCP packet with dport 2222. The UDP and TCP
destination ports sit at the same L4 offset, so a buggy kernel rewrites
the TCP dport. A second flower filter matches TCP dport 2222 and drops
the packet through an indexed gact action; the test then verifies via
JSON that this action saw exactly one packet, i.e. the dport was left
untouched and still matched 2222.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extended IPv4 L4 header mode in act_pedit can select TCP or UDP
header fields without confirming that the IPv4 protocol field matches
the selected transport header.
That lets a rule written for TCP or UDP modify unrelated payload bytes
in a packet carrying a different protocol.
Verify that the IPv4 header is long enough, that the protocol matches
the selected TCP or UDP header, and that the packet is not a non-initial
fragment before applying TCP or UDP extended header edits.
Cc: stable+noautosel@kernel.org # in real rule sets the match confirms this before calling the action
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_tnl_xmit() and ipip6_tunnel_xmit() run locklessly (dev->lltx == true).
ip6gre_err() and ipip6_err() also run locklessly.
We need to add READ_ONCE() and WRITE_ONCE() annotations
around t->err_count and t->err_time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260610171458.1359630-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- nxp-nci: Add ISO15693 support
- nxp-nci: treat -ENXIO in IRQ thread as no data available
- nci: uart: Constify struct tty_ldisc_ops
- trf7970a: fix comment typos
- Use named initializers for struct i2c_device_id
- MAINTAINERS: Update address for David Heidelberg
-----BEGIN PGP SIGNATURE-----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=BdKR
-----END PGP SIGNATURE-----
Merge tag 'nfc-net-next-20260611' of https://codeberg.org/linux-nfc/linux
David Heidelberg says:
====================
NFC updates for net-next 20260611
- nxp-nci: Add ISO15693 support
- nxp-nci: treat -ENXIO in IRQ thread as no data available
- nci: uart: Constify struct tty_ldisc_ops
- trf7970a: fix comment typos
- Use named initializers for struct i2c_device_id
- MAINTAINERS: Update address for David Heidelberg
* tag 'nfc-net-next-20260611' of https://codeberg.org/linux-nfc/linux:
MAINTAINERS: Update address for David Heidelberg
nfc: Use named initializers for struct i2c_device_id
nfc: nxp-nci: treat -ENXIO in IRQ thread as no data available
nfc: nxp-nci: Add ISO15693 support
nfc: nci: uart: Constify struct tty_ldisc_ops
nfc: trf7970a: fix comment typos
====================
Link: https://patch.msgid.link/1aed7555-3d24-413c-b284-bc85fdd33055@ixit.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
airoha_register_gdm_devices() iterates eth->ports[] in order, so GDM2's
netdev is always registered before GDM3/GDM4. This means the explicit
check for eth->ports[1] && eth->ports[1]->devs[0] is a redundant
special-case of what airoha_get_wan_gdm_dev() already covers, since
GDM2 is always marked as WAN during its own ndo_init.
Remove the redundant check and rely solely on airoha_get_wan_gdm_dev()
which handles both the GDM2-present and GDM2-absent cases.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260610-airoha-eth-simplify-dev-init-v2-1-8f244e69b0d4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When mlxsw_sp_vrs_lpm_tree_replace() fails after replacing some VRs,
the error rollback loop does not correctly revert the preceding
replacements. The loop decrements the index but fails to update the
vr pointer, which still points to the VR that caused the failure. As
a result, the condition and the rollback call always operate on the
same VR, potentially calling mlxsw_sp_vr_lpm_tree_replace() multiple
times on it while never rolling back the earlier VRs. Those VRs
continue to hold a reference to new_tree acquired via
mlxsw_sp_lpm_tree_hold(), leaking the reference count of new_tree.
Fix by reinitializing vr inside the error loop with the updated index:
vr = &mlxsw_sp->router->vrs[i];
so that the loop correctly iterates over all VRs that were actually
replaced.
Cc: stable@vger.kernel.org
Fixes: fc922bb0dd ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609084730.215732-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join()
returns an error without releasing the lag reference obtained by
the earlier mlxsw_sp_lag_get(). All other error paths in the
function jump to the cleanup label that ends with
mlxsw_sp_lag_put(), so this is a single missed release.
Fix the leak by replacing the bare 'return err' with a goto to the
existing error cleanup label, which will drop the reference safely.
Cc: stable@vger.kernel.org
Fixes: 0d65fc1304 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609083709.209743-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fidelio Lawson says:
====================
ksz87xx: add support for low-loss cable equalizer errata
This patch implements the KSZ87xx short cable erratum
described in Microchip document DS80000687C for KSZ87xx switches
and the following support article:
Link: https://support.microchip.com/s/article/Solution-for-Using-CAT-5E-or-CAT-6-Short-Cable-with-a-Link-Issue-for-the-KSZ8795-Family
According to the erratum, the embedded PHY receiver in KSZ87xx switches is
tuned by default for long, high-loss Ethernet cables. When operating with
short or low-loss cables (for example CAT5e or CAT6), the PHY equalizer may
over-amplify the incoming signal, leading to internal distortion and link
establishment failures.
Microchip documents two independent mechanisms to mitigate this issue:
adjusting the receiver low‑pass filter bandwidth and reducing the DSP
equalizer initial value. These registers are located in the switch’s
internal LinkMD table and cannot be accessed directly through a
stand‑alone PHY driver.
To keep the PHY‑facing API clean, this series models the erratum handling
as vendor‑specific Clause 22 PHY registers, virtualized by the KSZ8 DSA
driver. Accesses are intercepted by ksz8_r_phy() / ksz8_w_phy() and
translated into the appropriate indirect LinkMD register writes. The
erratum affects the shared PHY analog front‑end and therefore applies
globally to the switch.
Based on review feedback, the user‑visible interface is kept deliberately
simple and predictable:
- A boolean “short‑cable” PHY tunable applies a documented and
conservative preset (LPF bandwidth 62MHz, DSP EQ initial value 0).
This is the recommended KISS interface for the common short‑cable
scenario.
- Two additional integer PHY tunables allow advanced or experimental
tuning of the LPF bandwidth and the DSP EQ initial value. These
controls are orthogonal, have no ordering requirements, and simply
override the corresponding setting when written.
The tunables act as simple setters with no implicit state machine or
invalid combinations, avoiding surprises for userspace and not relying
on extended error reporting or netlink ethtool support.
This series contains:
1. Support for the KSZ87xx low‑loss cable erratum in the KSZ8 DSA driver,
including the short‑cable preset and orthogonal tuning controls.
2. Addition of vendor‑specific PHY tunable identifiers for the
short‑cable preset, LPF bandwidth, and DSP EQ initial value.
3. Exposure of these tunables through the Micrel PHY driver via
get_tunable / set_tunable callbacks.
This version follows the design agreed upon during v3 review and
reworks the interface accordingly.
====================
Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-0-9ba4418cf3db@exotec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the KSZ87xx low-loss cable PHY tunables in the Micrel
PHY driver by implementing get_tunable and set_tunable callbacks.
These callbacks expose vendor-specific PHY tunables used to control the
KSZ87xx embedded PHY receiver behavior when operating with short or
low-loss Ethernet cables. The tunables provide:
- a boolean short-cable preset applying known good settings;
- an integer LPF bandwidth control;
- an integer DSP EQ initial value control.
The Micrel PHY driver forwards these tunables via standard phy_read() /
phy_write() operations, which are virtualized by the KSZ8 DSA driver and
translated into the appropriate indirect switch register accesses.
Reviewed-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Fidelio Lawson <fidelio.lawson@exotec.com>
Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-3-9ba4418cf3db@exotec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce vendor-specific PHY tunable identifiers to control the
KSZ87xx low-loss cable erratum handling through the ethtool PHY
tunable interface.
The following tunables are added:
- a boolean "short-cable" tunable, applying a documented and
conservative preset intended for short or low-loss Ethernet cables;
- an integer LPF bandwidth tunable, allowing advanced adjustment of the
receiver low-pass filter bandwidth;
- an integer DSP EQ initial value tunable, allowing advanced tuning of
the PHY equalizer initialization.
The actual behavior is implemented by the corresponding PHY and switch
drivers.
Reviewed-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Fidelio Lawson <fidelio.lawson@exotec.com>
Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-2-9ba4418cf3db@exotec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the KSZ87xx short cable workaround.
This patch implements the KSZ87xx short cable erratum
described in Microchip document DS80000687C for KSZ87xx switches
and the following support article:
Link: https://support.microchip.com/s/article/Solution-for-Using-CAT-5E-or-CAT-6-Short-Cable-with-a-Link-Issue-for-the-KSZ8795-Family
The issue affects short or low-loss cable links (e.g. CAT5e/CAT6),
where the PHY receiver equalizer may amplify high-amplitude signals
excessively, resulting in internal distortion and link establishment
failures.
KSZ87xx devices require a workaround for the Module 3 low-loss cable
condition, controlled through the switch TABLE_LINK_MD_V indirect
registers.
This change models the erratum handling as vendor-specific Clause 22 PHY
registers, virtualized by the KSZ8 DSA driver and accessed via
ksz8_r_phy() / ksz8_w_phy(). The following controls are provided:
- A boolean “short-cable” preset, which applies a documented and
conservative configuration (LPF 62 MHz bandwidth and DSP EQ initial
value 0), and is the recommended interface for typical use cases.
- Separate LPF bandwidth and DSP EQ initial value controls intended for
advanced or experimental tuning. These are orthogonal and independent,
and override the corresponding settings without requiring any specific
ordering.
The preset and tunables act as simple setters with no implicit state
machine or invalid combinations, keeping the API predictable and aligned
with the KISS principle.
The erratum affects the shared PHY analog front-end and therefore applies
globally to the switch.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Fidelio Lawson <fidelio.lawson@exotec.com>
Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-1-9ba4418cf3db@exotec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add mod_flow() and the mod-flow CLI command to ovs-dpctl.py, exercising
OVS_FLOW_CMD_SET. Add test_flow_set which first modifies an existing
flow with new actions and verifies the change via traffic, then modifies
the same flow without actions and verifies the kernel handles the
no-actions case gracefully.
The no-actions path is unreachable from userspace OVS tools (dpctl
mod-flow requires actions) but reachable via raw netlink. This is the
code path where Adrian Moreno found a possible kfree_skb of ERR_PTR
when reply allocation fails after locking.
Make parse() skip OVS_FLOW_ATTR_ACTIONS when actstr is None so the
kernel enters the post-lock allocation branch in ovs_flow_cmd_set().
After the no-actions set, verify via dump-flows that the flow retained
its drop action.
Suggested-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Minxi Hou <houminxi@gmail.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260609165725.107484-1-houminxi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the per-packet __netdev_alloc_skb() + dma_map_single() in the
RX path with page_pool. SKBs are built from pool pages via
napi_build_skb() with skb_mark_for_recycle() so the network stack
returns pages to the pool, and DMA mapping happens once per page
instead of once per packet.
Reject HW-reported lengths smaller than the RSB so a runt cannot
underflow the SKB build path.
Drop the now-unused priv->rx_buf_len field and the rx_dma_failed soft
MIB counter (nothing increments it after the conversion). This
removes the "rx_dma_failed" entry from ethtool -S, which is a
user-visible change for monitoring tools that key on stat names.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Tested-by: Justin Chen <justin.chen@broadcom.com>
Link: https://patch.msgid.link/20260610114835.2225423-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the get_sport() callback invocation at the beginning of
airoha_enable_gdm2_loopback() routine in order to avoid leaving the
hardware in a partially configured state if get_sport() fails.
Previously, get_sport() was called after GDM2 forwarding, loopback,
channel, length, VIP and IFC registers had already been programmed.
A failure at that point would return an error leaving GDM2 with
loopback enabled but WAN port, PPE CPU port and flow control mappings
not configured.
Performing the get_sport() lookup before any register write guarantees
the routine either completes the full configuration sequence or exits
with no side effects on the hardware.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260608-airoha_enable_gdm2_loopback-minor-change-v1-1-1787a0f42b31@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: drop TCP TS with ADD_ADDRv6 + port
Up to this series, it was possible to add a "signal" MPTCP endpoint with
an IPv6 address and a port, or to directly request to send an ADD_ADDR
with a v6 address and a port, but the expected ADD_ADDR wasn't sent when
TCP timestamps was used for the connection.
In fact, such signalling option cannot be sent when TCP timestamps is
used due to a lack of option space: the limit is at 40 bytes, and, with
padding, TCP timestamps is taking 12 bytes, while an ADD_ADDR IPv6 +
port is taking 30 bytes. The selected solution here is to simply drop
the TCP timestamps option when such ADD_ADDR of 30 bytes needs to be
sent.
- Patches 1-3: small cleanups to avoid computing ADD/RM_ADDR twice.
- Patches 4-7: the new feature, controlled by a new sysctl knob.
- Patch 8: extra checks in the MPTCP Join selftests.
- Patches 9-15: A bunch of refactoring: renamed confusing helpers and
variables, and prevent future misused functions.
====================
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-0-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_pm_announced_del_timer() removes the matched ADD_ADDR entry (if
found) from the ADD_ADDR list only if check_id is false. That's
dangerous, and not clear, because it means the caller should be free the
entry only in some cases, and it easy to miss that.
Instead, make it static, and call it from mptcp_pm_add_addr_echoed,
which is the only other case where mptcp_pm_add_addr_del_timer should be
called with check_id set to true. Bonus with that: a second call to
mptcp_pm_add_addr_lookup_by_addr() can be avoided.
Note that instead of adding the signature above to avoid a compilation
issue because this helper is called before the definition of the
function, the whole helper is moved above where it is first called. Its
content is untouched, except the addition of the 'static' keyboard.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-14-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only used in pm.c.
Note that the signature is added above: it is easier than moving the
code around, because this helper depends on mptcp_pm_schedule_work which
is declared below.
While at it, explicitly mark it as to be called while pm->lock is held.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-13-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the two previous commits, using the 'add' prefix is
confusing, also confirmed by [1].
Now that the structure has been renamed to include 'add_addr' in its
name, easier to know the timer is linked to the ADD_ADDR, no need to
add the confusing prefix, or an unneeded longer one.
While at it, also update the ADD_ADDR timer helper to clearly specify it
is linked to ADD_ADDR, and it is not there to add a new timer.
Link: https://lore.kernel.org/20251117100745.1913963-1-edumazet@google.com [1]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-12-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, only using the 'add' or 'anno' prefixes
is confusing -- generally associated to the action of adding something,
or the Latin name for "year" -- and lack of uniformity.
This has been causing issues in the past, e.g. del_add_timer seemed to
suggest the goal is to delete a previously added timer.
Instead, use the mptcp_pm_announced_ prefix.
While at it, slightly improves some helpers:
- mptcp_lookup_anno_list_by_saddr: no need to specify what is used to do
the lookup: mptcp_pm_announced_lookup.
- mptcp_pm_sport_in_anno_list: it doesn't just compare the port, but the
whole address linked to the sublow: mptcp_pm_announced_has_ssk.
- mptcp_pm_alloc_anno_list: it allocates one item of the list, not a
whole list: mptcp_pm_announced_alloc.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-11-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using only the 'add' prefix is confusing: does it refer to a generic
added entry or address, or specifically to ADD_ADDRs. Using add_addr
removes this confusion.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-10-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to most places in the MPTCP code. So instead of passing the
subflow list and use list_for_each_entry(subflow, list, node), pass the
msk and use mptcp_for_each_subflow(msk, subflow).
That's clearer and more uniform with the rest.
While at it, add 'pm_' prefix for the exported one to easily identify
the origin. Plus replace 'lookup' by 'has', because a bool is returned.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-9-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before, they were only checked on demand, but it seems better to check
them each time received ADD_ADDRs are checked.
Errors are only reported when the counter exists, and the value is not
the expected one. This is similar to what is done in chk_join_nr: it
reduces the output, and avoids a lot of 'skip' when validating older
kernels. Also here, some tests need to adapt the default expected
counters, e.g. when ADD_ADDR echo are dropped on the reception side, or
it is not possible to send an ADD_ADDR due to the limited option space.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-8-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the feature added by parent commit, where it is now
possible to send an ADD_ADDR with a v6 IP address and a port number,
while the connection is using TCP Timestamps.
This test is simply a copy of the previous one: "signal address with
port", but using IPv6 addresses. This test is only executed if the
add_addr_v6_port_drop_ts sysctl knob is available. If not, it means the
kernel doesn't support this feature.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-7-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TCP-timestamps (padded) taking 12 bytes and ADD_ADDR IPv6 + port
taking 30 bytes, the 40-byte limit for the TCP options is reached. In
this case, it is then not possible to send the signal.
To be able to send this ADD_ADDR, the TCP timestamps option can now be
dropped. This is done, when needed by setting the *drop_ts parameter
from mptcp_established_options. This feature is controlled by a new
net.mptcp.add_addr_v6_port_drop_ts sysctl knob, enabled by default.
It is important to keep in mind that dropping the TCP timestamps option
for one packet of the connection could eventually disrupt some
middleboxes: even if it should be unlikely, they could drop the packet
or even block the connection. That's why this new feature can be
controlled by a sysctl knob.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/448
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-6-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TCP-timestamps (padded) taking 12 bytes and ADD_ADDR IPv6 + port
taking 30 bytes, the 40-byte limit for the TCP options is reached. In
this case, it is then not possible to send the address signal.
The idea is to let MPTCP dropping the TCP-timestamps option for some
specific packets, to be able to send some specific pure ACK carrying >28
bytes of MPTCP options, like with this specific ADD_ADDR. A new
parameter is passed from tcp_established_options to the MPTCP side to
indicate if the TCP TS option is used, and if it should be dropped. The
next commit implements the part on MPTCP side, but split into two
patches to help TCP maintainers to identify the modifications on TCP
side. This feature will be controlled by a new add_addr_v6_port_drop_ts
MPTCP sysctl knob.
It is important to keep in mind that dropping the TCP timestamps option
for one packet of the connection could eventually disrupt some
middleboxes: even if it should be unlikely, they could drop the packet
or even block the connection. That's why this new feature will be
controlled by a sysctl knob.
Note that it would be technically possible to squeeze both options into
the header if the ADD_ADDR is first written, and then the TCP timestamps
without the NOPs preceding it. But this means more modifications on TCP
side, plus some middleboxes could still be disrupted by that.
In this implementation, an unused bit is used in mptcp_out_options
structure to avoid passing an address to a local variable. Reading and
setting it needs CONFIG_MPTCP, so the whole block now has this #if
condition: mptcp_established_options() is then no longer used without
CONFIG_MPTCP.
About alternatives, instead of passing a new boolean (has_ts), another
option would be to pass the whole option structure (opts), but
'struct tcp_out_options' is currently defined in tcp_output.c, and it
would need to be exported. Plus that means the removal of the TCP TS
option would be done on the MPTCP side, and not here on the TCP side.
It feels clearer to remove other TCP options from the TCP side, than
hiding that from the MPTCP side.
Yet an other alternative would be to pass the size already taken by the
other TCP options, and have a way to drop them all when needed. But this
feels better to target only the timestamps option where dropping it
should be safe, even if it is currently the only option that would be
set before MPTCP, when MPTCP is used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-5-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This sysctl is going to be used in the next commits to drop TCP
timestamps option, to be able to send an ADD_ADDR with a v6 IP address
and a port number. It is enabled by default.
This knob is explicitly disabled in the MPTCP Join selftest, with the
"signal addr list progresses after tx drop" subtest, to continue
verifying the previous behaviour where the ADD_ADDR is not sent due to a
lack of space.
While at it, move syn_retrans_before_tcp_fallback down from struct
mptcp_pernet, to avoid creating another 3 bytes hole.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-4-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_add_addr_len helper was called twice: in mptcp_pm_add_addr_signal,
then just after in mptcp_established_options_add_addr. Both to check
the remaining space.
The second call is not needed: if there is not enough space,
mptcp_pm_add_addr_signal will return false, and the caller,
mptcp_established_options_add_addr, will do the same without re-checking
the size again. Instead, mptcp_pm_add_addr_signal can directly set the
size.
Note that the returned size can be negative when other suboptions are
dropped, e.g. to send an echo ADD_ADDR with a v4 address, and no port.
While at it:
- move mptcp_add_addr_len to pm.c, as it is now only used from there
- use 'int' in mptcp_add_addr_len for the size, instead of having a mix
- use a bool for 'ret' in mptcp_pm_add_addr_signal
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-3-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_rm_addr_len helper was called twice: in mptcp_pm_rm_addr_signal,
then just after in mptcp_established_options_rm_addr. Both to check the
remaining space.
The second call is not needed: if there is not enough space,
mptcp_pm_rm_addr_signal will return false, and the caller,
mptcp_established_options_rm_addr, will do the same without re-checking
the size again. Instead, mptcp_pm_rm_addr_signal can directly set the
size.
While at it, move mptcp_rm_addr_len to pm.c, as it is now only used
there, once.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-2-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use a signed int for the returned size, because when other options are
dropped, the size can be negative, e.g. to send an echo ADD_ADDR with a
v4 address, and no port.
The behaviour is not changed, because it was working as expected with an
overflow. But it is clearer like this, and it will help later on.
Even if, for the moment, only the ADD_ADDR size can be negative in some
cases, a signed int is now used for all mptcp_established_options_*()
helpers, not to mismatch the type, and as a question of uniformity.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-1-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
George Moussalem says:
====================
IPQ5018: Add and enable GEPHY RX and TX clocks
This patch series addresses a missing hardware description issue for
the Qualcomm IPQ5018 Internal Ethernet PHY, where the data paths fail
to function correctly unless their dedicated RX and TX clocks are
explicitly enabled.
Further testing revealed that leaving these clocks unmanaged by the
kernel, they were inadvertently left enabled by the bootloader / QSDK
platform, which masked the issue. Testing a fresh network configuration
path exposed that the data link fails to work without explicit software
gating.
To correctly introduce the required multi-clock properties, the IPQ5018
binding definition must first be split away from the shared
qca,ar803x.yaml schema. This isolation is required because ar803x
references the generic ethernet-phy.yaml, which enforces a strict
single-clock limit constraint.
- Patch 1: Moves the clocks property and its restriction out of the
generic ethernet-phy.yaml schema to individual bindings files
that need it to allow for PHYs that require multiple clocks.
- Patch 2: Add clocks property to qca,ar803x.yaml for the IPQ5018 PHY.
- Patch 3: Updates the Qualcomm AT803x PHY driver framework to acquire,
enable, and gate these clocks upon link state changes for
runtime power optimization.
====================
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-0-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
