Commit dc82a33297 ("veth: apply qdisc backpressure on full ptr_ring to
reduce TX drops") introduced a race condition that can lead to a permanently
stalled TXQ. This was observed in production on ARM64 systems (Ampere Altra
Max).
The race occurs in veth_xmit(). The producer observes a full ptr_ring and
stops the queue (netif_tx_stop_queue()). The subsequent conditional logic,
intended to re-wake the queue if the consumer had just emptied it (if
(__ptr_ring_empty(...)) netif_tx_wake_queue()), can fail. This leads to a
"lost wakeup" where the TXQ remains stopped (QUEUE_STATE_DRV_XOFF) and
traffic halts.
This failure is caused by an incorrect use of the __ptr_ring_empty() API
from the producer side. As noted in kernel comments, this check is not
guaranteed to be correct if a consumer is operating on another CPU. The
empty test is based on ptr_ring->consumer_head, making it reliable only for
the consumer. Using this check from the producer side is fundamentally racy.
This patch fixes the race by adopting the more robust logic from an earlier
version V4 of the patchset, which always flushed the peer:
(1) In veth_xmit(), the racy conditional wake-up logic and its memory barrier
are removed. Instead, after stopping the queue, we unconditionally call
__veth_xdp_flush(rq). This guarantees that the NAPI consumer is scheduled,
making it solely responsible for re-waking the TXQ.
This handles the race where veth_poll() consumes all packets and completes
NAPI *before* veth_xmit() on the producer side has called netif_tx_stop_queue.
The __veth_xdp_flush(rq) will observe rx_notify_masked is false and schedule
NAPI.
(2) On the consumer side, the logic for waking the peer TXQ is moved out of
veth_xdp_rcv() and placed at the end of the veth_poll() function. This
placement is part of fixing the race, as the netif_tx_queue_stopped() check
must occur after rx_notify_masked is potentially set to false during NAPI
completion.
This handles the race where veth_poll() consumes all packets, but haven't
finished (rx_notify_masked is still true). The producer veth_xmit() stops the
TXQ and __veth_xdp_flush(rq) will observe rx_notify_masked is true, meaning
not starting NAPI. Then veth_poll() change rx_notify_masked to false and
stops NAPI. Before exiting veth_poll() will observe TXQ is stopped and wake
it up.
Fixes: dc82a33297 ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Reviewed-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/176295323282.307447.14790015927673763094.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The validation of the set(nsh(...)) action is completely wrong.
It runs through the nsh_key_put_from_nlattr() function that is the
same function that validates NSH keys for the flow match and the
push_nsh() action. However, the set(nsh(...)) has a very different
memory layout. Nested attributes in there are doubled in size in
case of the masked set(). That makes proper validation impossible.
There is also confusion in the code between the 'masked' flag, that
says that the nested attributes are doubled in size containing both
the value and the mask, and the 'is_mask' that says that the value
we're parsing is the mask. This is causing kernel crash on trying to
write into mask part of the match with SW_FLOW_KEY_PUT() during
validation, while validate_nsh() doesn't allocate any memory for it:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1c2383067 P4D 1c2383067 PUD 20b703067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 8 UID: 0 Kdump: loaded Not tainted 6.17.0-rc4+ #107 PREEMPT(voluntary)
RIP: 0010:nsh_key_put_from_nlattr+0x19d/0x610 [openvswitch]
Call Trace:
<TASK>
validate_nsh+0x60/0x90 [openvswitch]
validate_set.constprop.0+0x270/0x3c0 [openvswitch]
__ovs_nla_copy_actions+0x477/0x860 [openvswitch]
ovs_nla_copy_actions+0x8d/0x100 [openvswitch]
ovs_packet_cmd_execute+0x1cc/0x310 [openvswitch]
genl_family_rcv_msg_doit+0xdb/0x130
genl_family_rcv_msg+0x14b/0x220
genl_rcv_msg+0x47/0xa0
netlink_rcv_skb+0x53/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x280/0x3b0
netlink_sendmsg+0x1f7/0x430
____sys_sendmsg+0x36b/0x3a0
___sys_sendmsg+0x87/0xd0
__sys_sendmsg+0x6d/0xd0
do_syscall_64+0x7b/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The third issue with this process is that while trying to convert
the non-masked set into masked one, validate_set() copies and doubles
the size of the OVS_KEY_ATTR_NSH as if it didn't have any nested
attributes. It should be copying each nested attribute and doubling
them in size independently. And the process must be properly reversed
during the conversion back from masked to a non-masked variant during
the flow dump.
In the end, the only two outcomes of trying to use this action are
either validation failure or a kernel crash. And if somehow someone
manages to install a flow with such an action, it will most definitely
not do what it is supposed to, since all the keys and the masks are
mixed up.
Fixing all the issues is a complex task as it requires re-writing
most of the validation code.
Given that and the fact that this functionality never worked since
introduction, let's just remove it altogether. It's better to
re-introduce it later with a proper implementation instead of trying
to fix it in stable releases.
Fixes: b2d0f5d5dc ("openvswitch: enable NSH support")
Reported-by: Junvy Yang <zhuque@tencent.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20251112112246.95064-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported use-after-free in mptcp_schedule_work() [1]
Issue here is that mptcp_schedule_work() schedules a work,
then gets a refcount on sk->sk_refcnt if the work was scheduled.
This refcount will be released by mptcp_worker().
[A] if (schedule_work(...)) {
[B] sock_hold(sk);
return true;
}
Problem is that mptcp_worker() can run immediately and complete before [B]
We need instead :
sock_hold(sk);
if (schedule_work(...))
return true;
sock_put(sk);
[1]
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 29 at lib/refcount.c:25 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:25
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:-1 [inline]
__refcount_inc include/linux/refcount.h:366 [inline]
refcount_inc include/linux/refcount.h:383 [inline]
sock_hold include/net/sock.h:816 [inline]
mptcp_schedule_work+0x164/0x1a0 net/mptcp/protocol.c:943
mptcp_tout_timer+0x21/0xa0 net/mptcp/protocol.c:2316
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22f/0x710 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1138
smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Cc: stable@vger.kernel.org
Fixes: 3b1d6210a9 ("mptcp: implement and use MPTCP-level retransmission")
Reported-by: syzbot+355158e7e301548a1424@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6915b46f.050a0220.3565dc.0028.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251113103924.3737425-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to devlink_info_version_fixed_put() in
mlxsw_linecard_devlink_info_get() did not check for errors,
although it is checked everywhere in the code.
Add missed 'err' check to the mlxsw_linecard_devlink_info_get()
Fixes: 3fc0c51905 ("mlxsw: core_linecards: Expose device PSID over device info")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251113161922.813828-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The LED setup routine registered both led_sync_good
and led_is_gm devices without checking the return
values of led_classdev_register(). If either registration
failed, the function continued silently, leaving the
driver in a partially-initialized state and leaking
a registered LED classdev.
Add proper error handling
Fixes: 7d9ee2e8ff ("net: dsa: hellcreek: Add PTP status LEDs")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/20251113135745.92375-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function mlxsw_sp_flower_stats() calls mlxsw_sp_acl_ruleset_get() to
obtain a ruleset reference. If the subsequent call to
mlxsw_sp_acl_rule_lookup() fails to find a rule, the function returns
an error without releasing the ruleset reference, causing a memory leak.
Fix this by using a goto to the existing error handling label, which
calls mlxsw_sp_acl_ruleset_put() to properly release the reference.
Fixes: 7c1b8eb175 ("mlxsw: spectrum: Add support for TC flower offload statistics")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251112052114.1591695-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethtool tsconfig Netlink path can trigger a null pointer
dereference. A call chain such as:
tsconfig_prepare_data() ->
dev_get_hwtstamp_phylib() ->
vlan_hwtstamp_get() ->
generic_hwtstamp_get_lower() ->
generic_hwtstamp_ioctl_lower()
results in generic_hwtstamp_ioctl_lower() being called with
kernel_cfg->ifr as NULL.
The generic_hwtstamp_ioctl_lower() function does not expect
a NULL ifr and dereferences it, leading to a system crash.
Fix this by adding a NULL check for kernel_cfg->ifr in
generic_hwtstamp_ioctl_lower(). If ifr is NULL, return -EINVAL.
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Closes: https://lore.kernel.org/cd6a7056-fa6d-43f8-b78a-f5e811247ba8@linux.dev
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251111173652.749159-2-r772577952@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Felix Maurer says:
====================
hsr: Send correct HSRv0 supervision frames
Hangbin recently reported that the hsr selftests were failing and noted
that the entries in the node table were not merged, i.e., had
00:00:00:00:00:00 as MacAddressB forever [1].
This failure only occured with HSRv0 because it was not sending
supervision frames anymore. While debugging this I found that we were
not really following the HSRv0 standard for the supervision frames we
sent, so I additionally made a few changes to get closer to the standard
and restore a more correct behavior we had a while ago.
The selftests can still fail because they take a while and run into the
timeout. I did not include a change of the timeout because I have more
improvements to the selftests mostly ready that change the test duration
but are net-next material.
[1]: https://lore.kernel.org/netdev/aMONxDXkzBZZRfE5@fedora/
====================
Link: https://patch.msgid.link/cover.1762876095.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For HSRv0, the path_id has the following meaning:
- 0000: PRP supervision frame
- 0001-1001: HSR ring identifier
- 1010-1011: Frames from PRP network (A/B, with RedBoxes)
- 1111: HSR supervision frame
Follow the IEC 62439-3:2010 standard more closely by setting the right
path_id for HSRv0 supervision frames (actually, it is correctly set when
the frame is constructed, but hsr_set_path_id() overwrites it) and set a
fixed HSR ring identifier of 1. The ring identifier seems to be generally
unused and we ignore it anyways on reception, but some fixed identifier is
definitely better than using one identifier in one direction and a wrong
identifier in the other.
This was also the behavior before commit f266a683a4 ("net/hsr: Better
frame dispatch") which introduced the alternating path_id. This was later
moved to hsr_set_path_id() in commit 451d8123f8 ("net: prp: add packet
handling support").
The IEC 62439-3:2010 also contains 6 unused bytes after the MacAddressA in
the HSRv0 supervision frames. Adjust a TODO comment accordingly.
Fixes: f266a683a4 ("net/hsr: Better frame dispatch")
Fixes: 451d8123f8 ("net: prp: add packet handling support")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/ea0d5133cd593856b2fa673d6e2067bf1d4d1794.1762876095.git.fmaurer@redhat.com
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On HSRv0, no supervision frames were sent. The supervison frames were
generated successfully, but failed the check for a sufficiently long mac
header, i.e., at least sizeof(struct hsr_ethhdr), in hsr_fill_frame_info()
because the mac header only contained the ethernet header.
Fix this by including the HSR header in the mac header when generating HSR
supervision frames. Note that the mac header now also includes the TLV
fields. This matches how we set the headers on rx and also the size of
struct hsrv0_ethhdr_sp.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Closes: https://lore.kernel.org/netdev/aMONxDXkzBZZRfE5@fedora/
Fixes: 9cfb5e7f0d ("net: hsr: fix hsr_init_sk() vs network/transport headers.")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/4354114fea9a642fe71f49aeeb6c6159d1d61840.1762876095.git.fmaurer@redhat.com
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Add Chunhai Guo as a EROFS reviewer to get more eyes from interested
industry vendors
- Fix infinite loop caused by incomplete craftd zstd-compressed data
(thanks to Robert again!)
-----BEGIN PGP SIGNATURE-----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=i7tY
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add Chunhai Guo as a EROFS reviewer to get more eyes from interested
industry vendors
- Fix infinite loop caused by incomplete crafted zstd-compressed data
(thanks to Robert again!)
* tag 'erofs-for-6.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: avoid infinite loop due to incomplete zstd-compressed data
MAINTAINERS: erofs: add myself as reviewer
The purpose of commit 703eec1b24 ("virtio_net: fixing XDP for fully
checksummed packets handling") is to record the flags in advance, as
their value may be overwritten in the XDP case. However, the flags
recorded under big mode are incorrect, because in big mode, the passed
buf does not point to the rx buffer, but rather to the page of the
submitted buffer. This commit fixes this issue.
For the small mode, the commit c11a49d58a ("virtio_net: Fix mismatched
buf address when unmapping for small packets") fixed it.
Tested-by: Alyssa Ross <hi@alyssa.is>
Fixes: 703eec1b24 ("virtio_net: fixing XDP for fully checksummed packets handling")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20251111090828.23186-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Address recently reported issues or issues found at the recent NFS
bake-a-thon held in Raleigh, NC.
Issues reported with v6.18-rc:
- Address a kernel build issue
- Reorder SEQUENCE processing to avoid spurious NFS4ERR_SEQ_MISORDERED
Issues that need expedient stable backports:
- Close a refcount leak exposure
- Report support for NFSv4.2 CLONE correctly
- Fix oops during COPY_NOTIFY processing
- Prevent rare crash after XDR encoding failure
- Prevent crash due to confused or malicious NFSv4.1 client
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmkR+oIACgkQM2qzM29m
f5dH4Q//cJWZs9TE6GpC0PbGU+vknUgfSZmRpopmzP2mGk5ECrS/BFGY+KScCbkn
sRsUmG8iSaXyXUg0XNBh+NB3dWSadlbD9ww5FDQh+V1kV1O3HxvxaMGZ/y7lOjt5
h29MDnkuRvLgk54vuQy34kpXLrYL4QT9KR6FZqqvtkTt/by+bOqAtdSkM2JcX1ZM
7ggWUjB2Fyqz+/kryqVyYK2O7hwrdisDboe6/kn6eRpXqNW78RjQBOMbmqPFko00
XQ6PcYeBzGgDHdc11JciyXa8uK14/17QuiFplHZJSYwqTWXPDPXF5rb1CHfjJECY
grQWOcz82vXwu4H/4r/doPWTxIU/37O67+ERNqlCiu8ldZdb9oKIWPfshISWQoor
k9UnoL5MCKiBibspX6MNz9PPqfUdd+ipwo4atft+sscAZL0G6DpKwvyuMUxztGOl
PqyQ0KbhT1B9PO7wlonSfIgy8oCpz6j2LR17hUKvRsefapU/uQD57npmNlCrCVWs
SFI2/vtlOxRcNMUdGjM/ih9i/foFgocxweal5uEc5s2nqdQvLp+apDccERDWIYlT
YgZlz1HgjA5aXKFwQw3t6kUk656IdZGuadzUOk90TSlJxRirfU18u3sBMl6klwtV
iTOyN96IcwxY6eIvQhTovfSJ9aZmCv5CdwrmJuhPxO+aaxD2MrA=
=hxkc
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Address recently reported issues or issues found at the recent NFS
bake-a-thon held in Raleigh, NC.
Issues reported with v6.18-rc:
- Address a kernel build issue
- Reorder SEQUENCE processing to avoid spurious NFS4ERR_SEQ_MISORDERED
Issues that need expedient stable backports:
- Close a refcount leak exposure
- Report support for NFSv4.2 CLONE correctly
- Fix oops during COPY_NOTIFY processing
- Prevent rare crash after XDR encoding failure
- Prevent crash due to confused or malicious NFSv4.1 client"
* tag 'nfsd-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO instead of depending on it"
nfsd: ensure SEQUENCE replay sends a valid reply.
NFSD: Never cache a COMPOUND when the SEQUENCE operation fails
NFSD: Skip close replay processing if XDR encoding fails
NFSD: free copynotify stateid in nfs4_free_ol_stateid()
nfsd: add missing FATTR4_WORD2_CLONE_BLKSIZE from supported attributes
nfsd: fix refcount leak in nfsd_set_fh_dentry()
- two minor fixes for DMA API infrastructure: restoring proper structure
padding used in benchmark tests (Qinxin Xia) and global DMA_BIT_MASK
macro rework to make it a bit more clang friendly (James Clark)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaRRZHwAKCRCJp1EFxbsS
RPP5AP4ywlRd8X9A6n3BGSWenWv+TIrTVcGwnjL67Gn18QcctgEAk7UrN7QY6POK
F0E2E1JLDYqju2X1I+57YM1hFqFghg8=
=tMdy
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.18-2025-11-12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- two minor fixes for DMA API infrastructure: restoring proper
structure padding used in benchmark tests (Qinxin Xia) and global
DMA_BIT_MASK macro rework to make it a bit more clang friendly (James
Clark)
* tag 'dma-mapping-6.18-2025-11-12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope
dma-mapping: benchmark: Restore padding to ensure uABI remained consistent
-----BEGIN PGP SIGNATURE-----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=i1Nm
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- Fix a Rust build error
- Fix exception/interrupt, memory management, perf event, hardware
breakpoint, kexec and KVM bugs
* tag 'loongarch-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix max supported vCPUs set with EIOINTC
LoongArch: KVM: Skip PMU checking on vCPU context switch
LoongArch: KVM: Restore guest PMU if it is enabled
LoongArch: KVM: Add delay until timer interrupt injected
LoongArch: KVM: Set page with write attribute if dirty track disabled
LoongArch: kexec: Print out debugging message if required
LoongArch: kexec: Initialize the kexec_buf structure
LoongArch: Use correct accessor to read FWPC/MWPC
LoongArch: Refine the init_hw_perf_events() function
LoongArch: Remove __GFP_HIGHMEM masking in pud_alloc_one()
LoongArch: Let {pte,pmd}_modify() record the status of _PAGE_DIRTY
LoongArch: Consolidate max_pfn & max_low_pfn calculation
LoongArch: Consolidate early_ioremap()/ioremap_prot()
LoongArch: Use physical addresses for CSR_MERRENTRY/CSR_TLBRENTRY
LoongArch: Clarify 3 MSG interrupt features
rust: Add -fno-isolate-erroneous-paths-dereference to bindgen_skip_c_flags
Add Magnus as a maintainer of the alpha port.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iNUEABYKAH0WIQReryEEmoa4pUzLG/qs6yl0DJpOlwUCaRPq318UgAAAAAAuAChp
c3N1ZXItZnByQG5vdGF0aW9ucy5vcGVucGdwLmZpZnRoaG9yc2VtYW4ubmV0NUVB
RjIxMDQ5QTg2QjhBNTRDQ0IxQkZBQUNFQjI5NzQwQzlBNEU5NwAKCRCs6yl0DJpO
l2ixAQDwl+7FbCK6YuE7rwV1zFzH5vFPHUr/9L07aJydg1L8BwD/VjJxRKIQYcid
AP8Llk4OvzfDj16TD+dlhHkRBgaJUAA=
=KfTN
-----END PGP SIGNATURE-----
Merge tag 'alpha-fixes-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fix from Matt Turner:
"Add Magnus as a maintainer of the alpha port"
* tag 'alpha-fixes-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
MAINTAINERS: Add Magnus Lindholm as maintainer for alpha port
- mwl8k: work around FW expecting a DSSS element in beacons
- ath11k: report correct TX status
- iwlwifi: avoid toggling links due to wrong element use
- iwlwifi: fix beacon template rate on older devices
- iwlwifi: fix loop iterator being used after loop
- mac80211: disallow address changes while using the address
- mac80211: avoid bad rate warning in monitor/sniffer mode
- hwsim: fix potential NULL deref (on monitor injection)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmkUcx8ACgkQ10qiO8sP
aACjpg/8Cs53ymk68GkDsB7xAc2bYX24+msE8ozV0IYkB/Yf4hoR7FUzqDv5ma4f
xVP3COnWBnF66Gifvq5M9+YZqsxPn1s5gb6dlb0rZFygHDWZ+j5qfpY94nRcuPL3
7U9lLm5dtOTGPCY8gm5n6Xo29svY1Rati5RcGN9hbb+1YZ2SogOLu7xGtrEiBZnC
/6nUeVi9njZVhC9qWtqXCaakGMEEU3nsiwJdJuj9WXp/8fi0SDoPRh6hDV85WbK9
0TQ3Fu6k8XzzyGkhPYEjq+t562F1jQahCgp9qHgZioEzRJ47BLncAs2sM0htr3Vh
nYO6S6TLpIMsbCk79I6suda5RF4PhU8Waz3B/arAcPyMj8rLj54r8Imu9Luh3oc5
xs8SYukuIch6NTBCSfQgLThmeFHmXyoznIuhlqH5hgxP/g2ZJAjfItc97Di+KxMr
L4QYiP4qM4m18PxblKgtk49uSXIKYkUdzJYWDYlGy7o/FH1JEhRwLrDqhe+i8yS/
e5i3x6iT4wx9utksnnOViq/zp2L56nLcOjtLht7MUAKLYUu89o7E/Ju+qppA/E+I
5irE2peTDHgNOwHwLexv7ZFN6yu3Gy1Su/GROm05NHgv+M5BfArg+p3uVGQxkOzc
kDGdsU0B+hO/q2aK47E1oy8dvnuC/9KP1zrY0LnXRc8xdAxylNo=
=VAyB
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple more fixes:
- mwl8k: work around FW expecting a DSSS element in beacons
- ath11k: report correct TX status
- iwlwifi: avoid toggling links due to wrong element use
- iwlwifi: fix beacon template rate on older devices
- iwlwifi: fix loop iterator being used after loop
- mac80211: disallow address changes while using the address
- mac80211: avoid bad rate warning in monitor/sniffer mode
- hwsim: fix potential NULL deref (on monitor injection)
* tag 'wireless-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
wifi: mwl8k: inject DSSS Parameter Set element into beacons if missing
wifi: mac80211_hwsim: Fix possible NULL dereference
wifi: mac80211: skip rate verification for not captured PSDUs
wifi: mac80211: reject address change while connecting
wifi: ath11k: zero init info->status in wmi_process_mgmt_tx_comp()
====================
Link: https://patch.msgid.link/20251112114621.15716-5-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sit driver's packet transmission path calls: sit_tunnel_xmit() ->
update_or_create_fnhe(), which lead to fnhe_remove_oldest() being called
to delete entries exceeding FNHE_RECLAIM_DEPTH+random.
The race window is between fnhe_remove_oldest() selecting fnheX for
deletion and the subsequent kfree_rcu(). During this time, the
concurrent path's __mkroute_output() -> find_exception() can fetch the
soon-to-be-deleted fnheX, and rt_bind_exception() then binds it with a
new dst using a dst_hold(). When the original fnheX is freed via RCU,
the dst reference remains permanently leaked.
CPU 0 CPU 1
__mkroute_output()
find_exception() [fnheX]
update_or_create_fnhe()
fnhe_remove_oldest() [fnheX]
rt_bind_exception() [bind dst]
RCU callback [fnheX freed, dst leak]
This issue manifests as a device reference count leak and a warning in
dmesg when unregistering the net device:
unregister_netdevice: waiting for sitX to become free. Usage count = N
Ido Schimmel provided the simple test validation method [1].
The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes().
Since rt_bind_exception() checks this field, setting it to zero prevents
the stale fnhe from being reused and bound to a new dst just before it
is freed.
[1]
ip netns add ns1
ip -n ns1 link set dev lo up
ip -n ns1 address add 192.0.2.1/32 dev lo
ip -n ns1 link add name dummy1 up type dummy
ip -n ns1 route add 192.0.2.2/32 dev dummy1
ip -n ns1 link add name gretap1 up arp off type gretap \
local 192.0.2.1 remote 192.0.2.2
ip -n ns1 route add 198.51.0.0/16 dev gretap1
taskset -c 0 ip netns exec ns1 mausezahn gretap1 \
-A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &
taskset -c 2 ip netns exec ns1 mausezahn gretap1 \
-A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &
sleep 10
ip netns pids ns1 | xargs kill
ip netns del ns1
Cc: stable@vger.kernel.org
Fixes: 67d6d681e1 ("ipv4: make exception cache less predictible")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251111064328.24440-1-nashuiliang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One of the factors of a link's grade is the channel load, which is
calculated from the AP's bss load element.
The current code takes this element from the beacon for an active link,
and from bss->ies for an inactive link.
bss->ies is set to either the beacon's ies or to the probe response
ones, with preference to the probe response (meaning that if there was
even one probe response, the ies of it will be stored in bss->ies and
won't be overiden by the beacon ies).
The probe response can be very old, i.e. from the connection time,
where a beacon is updated before each link selection (which is
triggered only after a passive scan).
In such case, the bss load element in the probe response will not
include the channel load caused by the STA, where the beacon will.
This will cause the inactive link to always have a lower channel
load, and therefore an higher grade than the active link's one.
This causes repeated link switches, causing the throughput to drop.
Fix this by always taking the ies from the beacon, as those are for
sure new.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110145652.b493dbb1853a.I058ba7309c84159f640cc9682d1bda56dd56a536@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
During the development of the rate changes, I evidently made
some changes that shouldn't have been there; beacon templates
with rate_n_flags are only in old versions, so no changes to
them should have been necessary, and evidently broke on some
devices. This also would have broken fixed (injection) rates,
it would seem. Restore the old handling of this.
Fixes: dabc88cb3b ("wifi: iwlwifi: handle v3 rates")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220558
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20251008112044.3bb8ea849d8d.I90f4d2b2c1f62eaedaf304a61d2ab9e50c491c2d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
The list_for_each_entry() iterator must not be used outside the loop.
Even though we break and check for NULL, doing so still violates kernel
iteration rules and triggers Coccinelle's use_after_iter.cocci warning.
Cache the matched entry in aux_roc_te and use it consistently after the
loop. This follows iterator best practices, resolves the warning, and
makes the code more maintainable.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251016014919.383565-1-junjie.cao@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
After commit 100dfa74ca ("inet: dev_queue_xmit() llist adoption")
I started seeing many qdisc requeues on IDPF under high TX workload.
$ tc -s qd sh dev eth1 handle 1: ; sleep 1; tc -s qd sh dev eth1 handle 1:
qdisc mq 1: root
Sent 43534617319319 bytes 268186451819 pkt (dropped 0, overlimits 0 requeues 3532840114)
backlog 1056Kb 6675p requeues 3532840114
qdisc mq 1: root
Sent 43554665866695 bytes 268309964788 pkt (dropped 0, overlimits 0 requeues 3537737653)
backlog 781164b 4822p requeues 3537737653
This is caused by try_bulk_dequeue_skb() being only limited by BQL budget.
perf record -C120-239 -e qdisc:qdisc_dequeue sleep 1 ; perf script
...
netperf 75332 [146] 2711.138269: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1292 skbaddr=0xff378005a1e9f200
netperf 75332 [146] 2711.138953: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1213 skbaddr=0xff378004d607a500
netperf 75330 [144] 2711.139631: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1233 skbaddr=0xff3780046be20100
netperf 75333 [147] 2711.140356: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1093 skbaddr=0xff37800514845b00
netperf 75337 [151] 2711.141037: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1353 skbaddr=0xff37800460753300
netperf 75337 [151] 2711.141877: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1367 skbaddr=0xff378004e72c7b00
netperf 75330 [144] 2711.142643: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1202 skbaddr=0xff3780045bd60000
...
This is bad because :
1) Large batches hold one victim cpu for a very long time.
2) Driver often hit their own TX ring limit (all slots are used).
3) We call dev_requeue_skb()
4) Requeues are using a FIFO (q->gso_skb), breaking qdisc ability to
implement FQ or priority scheduling.
5) dequeue_skb() gets packets from q->gso_skb one skb at a time
with no xmit_more support. This is causing many spinlock games
between the qdisc and the device driver.
Requeues were supposed to be very rare, lets keep them this way.
Limit batch sizes to /proc/sys/net/core/dev_weight (default 64) as
__qdisc_run() was designed to use.
Fixes: 5772e9a346 ("qdisc: bulk dequeue support for qdiscs with TCQ_F_ONETXQUEUE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20251109161215.2574081-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Matthieu Baerts says:
====================
selftests: mptcp: join: fix some flaky tests
When looking at the recent CI results on NIPA and MPTCP CIs, a few MPTCP
Join tests are marked as unstable. Here are some fixes for that.
- Patch 1: a small fix for mptcp_connect.sh, printing a note as
initially intended. For >=v5.13.
- Patch 2: avoid unexpected reset when closing subflows. For >= 5.13.
- Patches 3-4: longer transfer when not waiting for the end. For >=5.18.
- Patch 5: read all received data when expecting a reset. For >= v6.1.
- Patch 6: a fix to properly kill background tasks. For >= v6.5.
====================
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-0-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'run_tests' function is executed in the background, but killing its
associated PID would not kill the children tasks running in the
background.
To properly kill all background tasks, 'kill -- -PID' could be used, but
this requires kill from procps-ng. Instead, all children tasks are
listed using 'ps', and 'kill' is called with all PIDs of this group.
Fixes: 31ee4ad86a ("selftests: mptcp: join: stop transfer when check is done (part 1)")
Cc: stable@vger.kernel.org
Fixes: 04b57c9e09 ("selftests: mptcp: join: stop transfer when check is done (part 2)")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-6-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP Join "fastclose server" selftest is sometimes failing because the
client output file doesn't have the expected size, e.g. 296B instead of
1024B.
When looking at a packet trace when this happens, the server sent the
expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE.
It is then strange to see the client only receiving 296B, which would
mean it only got a part of the second packet. The problem is then not on
the networking side, but rather on the data reception side.
When mptcp_connect is launched with '-f -1', it means the connection
might stop before having sent everything, because a reset has been
received. When this happens, the program was directly stopped. But it is
also possible there are still some data to read, simply because the
previous 'read' step was done with a buffer smaller than the pending
data, see do_rnd_read(). In this case, it is important to read what's
left in the kernel buffers before stopping without error like before.
SIGPIPE is now ignored, not to quit the app before having read
everything.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all userspace tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Fixes: b2e2248f36 ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081 ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-4-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all endpoints tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 69c6ce7b6e ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Fixes: e274f71540 ("selftests: mptcp: add subflow limits test-cases")
Fixes: b5e2fb832f ("selftests: mptcp: add explicit test case for remove/readd")
Fixes: e06959e9ee ("selftests: mptcp: join: test for flush/re-add endpoints")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a80 ("selftests: mptcp: add testcases for removing addrs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "fallback due to TCP OoO" was never printed because the stat_ooo_now
variable was checked twice: once in the parent if-statement, and one in
the child one. The second condition was then always true then, and the
'else' branch was never taken.
The idea is that when there are more ACK + MP_CAPABLE than expected, the
test either fails if there was no out of order packets, or a notice is
printed.
Fixes: 69ca3d29a7 ("mptcp: update selftest for fallback due to OoO")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building documentation produced the following warning:
WARNING: ./include/linux/ethtool.h:495 This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* IEEE 802.3ck/df defines 16 bins for FEC histogram plus one more for
This comment was not intended to be parsed as kernel-doc, so replace
the '/**' with '/*' to silence the warning and align with normal
comment style in header files.
No functional changes.
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Link: https://patch.msgid.link/20251110182545.2112596-1-kriish.sharma2006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Avoid sleeping in atomic context when changing linear map permissions
for DEBUG_PAGEALLOC or KFENCE.
- Rework printing of Spectre mitigation status to avoid hardlockup when
enabling per-task mitigations on the context-switch path.
- Reject kernel modules when instruction patching fails either due to
the DWARF-based SCS patching or because of an alternatives callback
residing outside of the core kernel text.
- Propagate error when updating kernel memory permissions in kprobes.
- Drop pointless, incorrect message when enabling the ACPI SPCR console.
- Use value-returning LSE instructions for per-cpu atomics to reduce
latency in SRCU locking routines.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmkSAqQQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNHIpB/0SubZVLevJmInp4nu93ghHwu/8UhYG1Jpg
P4DayUJ0Ghnox6PMSNci4s2+RSQc8NbdF2I4kcJNa8v8kMt9sXDL87614nZXDVtK
FaEMK4PnnV3iFcQUr58kKWEf8cowG7gIi9Lq61InADAbZhQCDi/KAnlr5ydjF8hT
Ixo9PwIDOlWiBi6IwJRt1yWsswtNFOcDhor3boFL+e19jjbwmgCXqejbwb74KtK7
C5xcECzC8uHOuukn3Q0cZbKqpc+x9Nc98FnA44n9Ht+eoi/svEAYVeJuk1PJNGnA
viAv0DJ8QUP2OLYrMmuOPReg5+n/RL7i9rNXJvcBQDmRUOVmMPQh
=kjVk
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's more here than I would ideally like at this stage, but there's
been a steady trickle of fixes and some of them took a few rounds of
review.
The bulk of the changes are fixing some fallout from the recent BBM
level two support which allows the linear map to be split from block
to page mappings at runtime, but inadvertently led to sleeping in
atomic context on some paths where the linear map was already mapped
with page granularity. The fix is simply to avoid splitting in those
cases but the implementation of that is a little involved.
The other interesting fix is addressing a catastophic performance
issue with our per-cpu atomics discovered by Paul in the SRCU locking
code but which took some interactions with the hardware folks to
resolve.
Summary:
- Avoid sleeping in atomic context when changing linear map
permissions for DEBUG_PAGEALLOC or KFENCE
- Rework printing of Spectre mitigation status to avoid hardlockup
when enabling per-task mitigations on the context-switch path
- Reject kernel modules when instruction patching fails either due to
the DWARF-based SCS patching or because of an alternatives callback
residing outside of the core kernel text
- Propagate error when updating kernel memory permissions in kprobes
- Drop pointless, incorrect message when enabling the ACPI SPCR
console
- Use value-returning LSE instructions for per-cpu atomics to reduce
latency in SRCU locking routines"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Reject modules with internal alternative callbacks
arm64: Fail module loading if dynamic SCS patching fails
arm64: proton-pack: Fix hard lockup due to print in scheduler context
arm64: proton-pack: Drop print when !CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
arm64: mm: Tidy up force_pte_mapping()
arm64: mm: Optimize range_split_to_ptes()
arm64: mm: Don't sleep in split_kernel_leaf_mapping() when in atomic context
arm64: kprobes: check the return value of set_memory_rox()
arm64: acpi: Drop message logging SPCR default console
Revert "ACPI: Suppress misleading SPCR console message when SPCR table is absent"
arm64: Use load LSE atomics for the non-return per-CPU atomic operations
-----BEGIN PGP SIGNATURE-----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=jVku
-----END PGP SIGNATURE-----
Merge tag 'for-6.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix new inode name tracking in tree-log
- fix conventional zone and stripe calculations in zoned mode
- fix bio reference counts on error paths in relocation and scrub
* tag 'for-6.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: release root after error in data_reloc_print_warning_inode()
btrfs: scrub: put bio after errors in scrub_raid56_parity_stripe()
btrfs: do not update last_log_commit when logging inode due to a new name
btrfs: zoned: fix stripe width calculation
btrfs: zoned: fix conventional zone capacity calculation
- a three patch series from Pasha Tatashin which addresses some Kexec
Handover issues
- a two patch series from Kiryl Shutsemau which fixes handling of large
folios which are mapped outside i_size
- a two patch series from Quanmin Yan which fixes some DAMON time issues
on 32-bit machines
Plus the usual shower of singletome.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaRKt7wAKCRDdBJ7gKXxA
jvP8AP9f35mSzY3bUjEYp4IoSDKOeNprOVQLpoz5tN1Dz48UnAEA9Gk6PnkgJovJ
8mXoAI4p6OqMgBkHkxVxaITMusk1IwY=
=9Mei
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-11-10-19-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"26 hotfixes. 22(!) are cc:stable, 22 are MM.
- address some Kexec Handover issues (Pasha Tatashin)
- fix handling of large folios which are mapped outside i_size (Kiryl
Shutsemau)
- fix some DAMON time issues on 32-bit machines (Quanmin Yan)
Plus the usual shower of singletons"
* tag 'mm-hotfixes-stable-2025-11-10-19-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
kho: warn and exit when unpreserved page wasn't preserved
kho: fix unpreservation of higher-order vmalloc preservations
kho: fix out-of-bounds access of vmalloc chunk
MAINTAINERS: add Chris and Kairui as the swap maintainer
mm/secretmem: fix use-after-free race in fault handler
mm/huge_memory: initialise the tags of the huge zero folio
nilfs2: avoid having an active sc_timer before freeing sci
scripts/decode_stacktrace.sh: fix build ID and PC source parsing
mm/damon/sysfs: change next_update_jiffies to a global variable
mm/damon/stat: change last_refresh_jiffies to a global variable
maple_tree: fix tracepoint string pointers
codetag: debug: handle existing CODETAG_EMPTY in mark_objexts_empty for slabobj_ext
mm/mremap: honour writable bit in mremap pte batching
gcov: add support for GCC 15
mm/mm_init: fix hash table order logging in alloc_large_system_hash()
mm/truncate: unmap large folio on split failure
mm/memory: do not populate page table entries beyond i_size
fs/proc: fix uaf in proc_readdir_de()
mm/huge_memory: preserve PG_has_hwpoisoned if a folio is split to >0 order
ksm: use range-walk function to jump over holes in scan_get_next_rmap_item
...
When smb_direct_disconnect_rdma_connection() turns SMBDIRECT_SOCKET_CREATED
into SMBDIRECT_SOCKET_ERROR, we'll have the situation that
smb_direct_disconnect_rdma_work() will set SMBDIRECT_SOCKET_DISCONNECTING
and call rdma_disconnect(), which likely fails as we never reached
the RDMA_CM_EVENT_ESTABLISHED. it means that
wait_event(sc->status_wait, sc->status == SMBDIRECT_SOCKET_DISCONNECTED)
in free_transport() will hang forever in SMBDIRECT_SOCKET_DISCONNECTING
never reaching SMBDIRECT_SOCKET_DISCONNECTED.
So we directly go from SMBDIRECT_SOCKET_CREATED to
SMBDIRECT_SOCKET_DISCONNECTED.
Fixes: b3fd52a0d8 ("smb: server: let smb_direct_disconnect_rdma_connection() set SMBDIRECT_SOCKET_ERROR...")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, CQs without a completion function are assigned the
mlx5_add_cq_to_tasklet function by default. This is problematic since
only user CQs created through the mlx5_ib driver are intended to use
this function.
Additionally, all CQs that will use doorbells instead of polling for
completions must call mlx5_cq_arm. However, the default CQ creation flow
leaves a valid value in the CQ's arm_db field, allowing FW to send
interrupts to polling-only CQs in certain corner cases.
These two factors would allow a polling-only kernel CQ to be triggered
by an EQ interrupt and call a completion function intended only for user
CQs, causing a null pointer exception.
Some areas in the driver have prevented this issue with one-off fixes
but did not address the root cause.
This patch fixes the described issue by adding defaults to the create CQ
flow. It adds a default dummy completion function to protect against
null pointer exceptions, and it sets an invalid command sequence number
by default in kernel CQs to prevent the FW from sending an interrupt to
the CQ until it is armed. User CQs are responsible for their own
initialization values.
Callers of mlx5_core_create_cq are responsible for changing the
completion function and arming the CQ per their needs.
Fixes: cdd04f4d4d ("net/mlx5: Add support to create SQ and CQ for ASO")
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/1762681743-1084694-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For chips with security enabled, it's only possible to load firmware
with a valid signature pattern.
If key_id is not zero, it indicates a security chip, and the driver will
not load the config file.
- Example log for a security chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a
lmp_ver=0c lmp_subver=8922
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: btrtl_initialize: key id 1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin
Bluetooth: hci0: RTL: cfg_sz 0, total sz 71301
Bluetooth: hci0: RTL: fw version 0x41c0c905
- Example log for a normal chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a
lmp_ver=0c lmp_subver=8922
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: btrtl_initialize: key id 0
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_config.bin
Bluetooth: hci0: RTL: cfg_sz 6, total sz 71307
Bluetooth: hci0: RTL: fw version 0x41c0c905
Tested-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Nial Ni <niall_ni@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change the debug message to print the correct units instead of always
assuming Gbps, as the value can be in either 100 Mbps or 1 Gbps units.
Fixes: 5da8bc3eff ("net/mlx5e: DCBNL, Add debug messages log")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The previous calculation used roundup() which caused an overflow for
rates between 25.5Gbps and 26Gbps.
For example, a rate of 25.6Gbps would result in using 100Mbps units with
value of 256, which would overflow the 8 bits field.
Simplify the upper_limit_mbps calculation by removing the
unnecessary roundup, and adjust the comparison to use <= to correctly
handle the boundary condition.
Fixes: d8880795da ("net/mlx5e: Implement DCBNL IEEE max rate")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When trying to set num_doorbells to a value greater than the max number
of channels, the error message was going over the netlink limit of 80
chars, truncating the most important part of the message, the number of
channels.
Fix that by trimming the length a bit.
Fixes: 11bbcfb766 ("net/mlx5e: Use the 'num_doorbells' devlink param")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix a KMSAN kernel-infoleak detected by the syzbot .
[net?] KMSAN: kernel-infoleak in __skb_datagram_iter
In tcf_ife_dump(), the variable 'opt' was partially initialized using a
designatied initializer. While the padding bytes are reamined
uninitialized. nla_put() copies the entire structure into a
netlink message, these uninitialized bytes leaked to userspace.
Initialize the structure with memset before assigning its fields
to ensure all members and padding are cleared prior to beign copied.
This change silences the KMSAN report and prevents potential information
leaks from the kernel memory.
This fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures no infoleak.
Reported-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c85cae3350b7d486aee
Tested-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com
Fixes: ef6980b6be ("introduce IFE action")
Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251109091336.9277-3-vnranganath.20@gmail.com
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
