Swap devices are assumed to have similar accessing speed when swapon if no
priority is specified. It's unfair and doesn't make sense just because
one swap device is swapped on firstly, its priority will be higher than
the one swapped on later.
Here, set all swap devicess to have priority '-1' by default. With this
change, swap device with default priority will be selected round robin
when swapping out. This can improve the swapping efficiency a lot among
multiple swap devices with default priority.
Below are swapon output during the processes when high pressure
vm-scability test is being taken:
1) This is pre-commit a2468cc9bf, swap device is selectd one by one by
priority from high to low when one swap device is exhausted:
------------------------------------
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 16G -1
/dev/zram1 partition 16G 966.2M -2
/dev/zram2 partition 16G 0B -3
/dev/zram3 partition 16G 0B -4
2) This is behaviour with commit a2468cc9bf, on node, swap device
sharing the same node id is selected firstly until exhausted; while
on node no swap device sharing the node id it selects the one with
highest priority until exhaustd:
------------------------------------
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 15.7G -2
/dev/zram1 partition 16G 3.4G -3
/dev/zram2 partition 16G 3.4G -4
/dev/zram3 partition 16G 2.6G -5
3) After this patch applied, swap devices with default priority are selectd
round robin:
------------------------------------
[root@hp-dl385g10-03 block]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 6.6G -1
/dev/zram1 partition 16G 6.6G -1
/dev/zram2 partition 16G 6.6G -1
/dev/zram3 partition 16G 6.6G -1
With the change, about 18% efficiency promotion relative to node based
way as below. (Surely, the pre-commit a2468cc9bf way is the worst.)
vm-scability test:
==================
Test with:
usemem --init-time -O -y -x -n 31 2G (4G memcg, zram as swap)
one by one: node based: round robin:
System time: 1087.38 s 637.92 s 526.74 s (lower is better)
Sum Throughput: 2036.55 MB/s 3546.56 MB/s 4207.56 MB/s (higher is better)
Single process Throughput: 65.69 MB/s 114.40 MB/s 135.72 MB/s (high is better)
free latency: 15769409.48 us 10138455.99 us 6810119.01 us(lower is better)
Link: https://lkml.kernel.org/r/20251028034308.929550-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/swapfile.c: select swap devices of default priority round
robin", v5.
Currently, on system with multiple swap devices, swap allocation will
select one swap device according to priority. The swap device with the
highest priority will be chosen to allocate firstly.
People can specify a priority from 0 to 32767 when swapon a swap device,
or the system will set it from -2 then downwards by default. Meanwhile,
on NUMA system, the swap device with node_id will be considered first on
that NUMA node of the node_id.
In the current code, an array of plist, swap_avail_heads[nid], is used to
organize swap devices on each NUMA node. For each NUMA node, there is a
plist organizing all swap devices. The 'prio' value in the plist is the
negated value of the device's priority due to plist being sorted from low
to high. The swap device owning one node_id will be promoted to the front
position on that NUMA node, then other swap devices are put in order of
their default priority.
E.g I got a system with 8 NUMA nodes, and I setup 4 zram partition as
swap devices.
Current behaviour:
their priorities will be(note that -1 is skipped):
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 0B -2
/dev/zram1 partition 16G 0B -3
/dev/zram2 partition 16G 0B -4
/dev/zram3 partition 16G 0B -5
And their positions in the 8 swap_avail_lists[nid] will be:
swap_avail_lists[0]: /* node 0's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:3 prio:4 prio:5
swap_avali_lists[1]: /* node 1's available swap device list */
zram1 -> zram0 -> zram2 -> zram3
prio:1 prio:2 prio:4 prio:5
swap_avail_lists[2]: /* node 2's available swap device list */
zram2 -> zram0 -> zram1 -> zram3
prio:1 prio:2 prio:3 prio:5
swap_avail_lists[3]: /* node 3's available swap device list */
zram3 -> zram0 -> zram1 -> zram2
prio:1 prio:2 prio:3 prio:4
swap_avail_lists[4-7]: /* node 4,5,6,7's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:2 prio:3 prio:4 prio:5
The adjustment for swap device with node_id intended to decrease the
pressure of lock contention for one swap device by taking different swap
device on different node. The adjustment was introduced in commit
a2468cc9bf ("swap: choose swap device according to numa node").
However, the adjustment is a little coarse-grained. On the node, the swap
device sharing the node's id will always be selected firstly by node's
CPUs until exhausted, then next one. And on other nodes where no swap
device shares its node id, swap device with priority '-2' will be selected
firstly until exhausted, then next with priority '-3'.
This is the swapon output during the process high pressure vm-scability
test is being taken. It's clearly showing zram0 is heavily exploited
until exhausted.
===================================
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 15.7G -2
/dev/zram1 partition 16G 3.4G -3
/dev/zram2 partition 16G 3.4G -4
/dev/zram3 partition 16G 2.6G -5
The node based strategy on selecting swap device is much better then the
old way one by one selecting swap device. However it is still
unreasonable because swap devices are assumed to have similar accessing
speed if no priority is specified when swapon. It's unfair and doesn't
make sense just because one swap device is swapped on firstly, its
priority will be higher than the one swapped on later.
So in this patchset, change is made to select the swap device round robin
if default priority. In code, the plist array swap_avail_heads[nid] is
replaced with a plist swap_avail_head which reverts commit a2468cc9bf.
Meanwhile, on top of the revert, further change is taken to make any
device w/o specified priority get the same default priority '-1'. Surely,
swap device with specified priority are always put foremost, this is not
impacted. If you care about their different accessing speed, then use
'swapon -p xx' to deploy priority for your swap devices.
New behaviour:
swap_avail_list: /* one global available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:1 prio:1 prio:1
This is the swapon output during the process high pressure vm-scability
being taken, all is selected round robin:
=======================================
[root@hp-dl385g10-03 linux]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 12.6G -1
/dev/zram1 partition 16G 12.6G -1
/dev/zram2 partition 16G 12.6G -1
/dev/zram3 partition 16G 12.6G -1
With the change, we can see about 18% efficiency promotion as below:
vm-scability test:
==================
Test with:
usemem --init-time -O -y -x -n 31 2G (4G memcg, zram as swap)
Before: After:
System time: 637.92 s 526.74 s (lower is better)
Sum Throughput: 3546.56 MB/s 4207.56 MB/s (higher is better)
Single process Throughput: 114.40 MB/s 135.72 MB/s (higher is better)
free latency: 10138455.99 us 6810119.01 us (low is better)
This patch (of 2):
This reverts commit a2468cc9bf ("swap: choose swap device according to
numa node").
After this patch, the behaviour will change back to pre-commit
a2468cc9bf. Means the priority will be set from -1 then downwards by
default, and when swapping, it will exhault swap device one by one
according to priority from high to low. This is preparation work for
later change.
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 16G -1
/dev/zram1 partition 16G 966.2M -2
/dev/zram2 partition 16G 0B -3
/dev/zram3 partition 16G 0B -4
Link: https://lkml.kernel.org/r/20251028034308.929550-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20251028034308.929550-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
INVALID_PHYS_ADDR has very similar definitions across the code base.
Hence just move that inside header <liux/mm.h> for more generic usage.
Also drop the now redundant ones which are no longer required.
Link: https://lkml.kernel.org/r/20251021025638.2420216-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We declare vma_start_read() as a static function in mm/mmap_lock.c, so
there is no need to provide a stub for !CONFIG_PER_VMA_LOCK.
__is_vma_write_locked() is declared in a header and should therefore be
static inline.
Put parens around (refcnt & VMA_LOCK_OFFSET) in is_vma_writer_only() to
make precedence clear.
Link: https://lkml.kernel.org/r/20251024090902.1118174-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For now, including <asm/pgalloc.h> instead of <linux/pgalloc.h> is
technically fine unless the .c file calls p*d_populate_kernel() helper
functions.
But it is a better practice to always include <linux/pgalloc.h>. Include
<linux/pgalloc.h> instead of <asm/pgalloc.h> outside arch/.
Link: https://lkml.kernel.org/r/20251024113047.119058-3-harry.yoo@oracle.com
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: MISC follow-up patches for linux/pgalloc.h", v2.
This is a follow-up patch series for the patch series named: "[PATCH V5
mm-hotfixes 0/3] mm, x86: fix crash due to missing page table sync and
make it harder to miss".
This patch (of 2):
Since include/linux/pgtable.h is already listed in the MM CORE section,
add it to the section as well to keep it maintained by the appropriate
maintainers.
Link: https://lkml.kernel.org/r/20251024113047.119058-1-harry.yoo@oracle.com
Link: https://lkml.kernel.org/r/20251024113047.119058-2-harry.yoo@oracle.com
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A new DAMON sysfs file for pin-point target removal, namely
obsolete_target, has been added. Add a test for the functionality. It
starts DAMON with three monitoring target processes, mark one in the
middle as obsolete, commit it, and confirm the internal DAMON status is
updated to remove the target in the middle.
Link: https://lkml.kernel.org/r/20251023012535.69625-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
assert_ctx_committed() is not asserting monitoring targets commitment,
since all existing callers of the function assume no target changes.
Extend it for future usage.
Link: https://lkml.kernel.org/r/20251023012535.69625-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A new field of damon_target for pin-point target removal, namely obsolete,
has newly been added. Extend drgn_dump_damon_status.py to dump it, for
easily writing a future DAMON selftests of it.
Link: https://lkml.kernel.org/r/20251023012535.69625-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A DAMON sysfs file, namely obsolete_target, has been newly introduced.
Add a support of that file to _damon_sysfs.py so that DAMON selftests for
the file can be easily written.
Link: https://lkml.kernel.org/r/20251023012535.69625-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is no good way to remove DAMON targets in the middle of the existing
targets list. It restricts efficient and flexible DAMON use cases.
Improve the usability by implementing a new DAMON sysfs interface file,
namely obsolete_target, under each target directory. It is connected to
the obsolete field of parameters commit-source targets, so allows removing
arbitrary targets in the middle of existing targets list.
Note that the sysfs files are not automatically updated. For example,
let's suppose there are three targets in the running context, and a user
removes the third target using this feature. If the user writes 'commit'
to the kdamond 'state' file again, DAMON sysfs interface will again try to
remove the third target. But because there is no matching target in the
running context, the commit will fail. It is the user's responsibility to
understand resulting DAMON internal targets list change, and construct
sysfs files (using nr_targets and other sysfs files) to correctly
represent it.
Also note that this is arguably an improvement rather than a fix of broken
things.
Link: https://lkml.kernel.org/r/20251023012535.69625-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Bijan Tabatabai <bijan311@gmail.com>
Closes: https://github.com/damonitor/damo/issues/36
Reviewed-by: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface tests if given online parameters update request is
valid, by committing those using the DAMON kernel API, to a test-purpose
destination context. The test-purpose destination context is constructed
using damon_new_ctx(), so it has no target, no scheme.
If a source target has the obsolete field set, the test-purpose commit
will fail because damon_commit_targets() fails when there is a source
obsolete target that cannot find its matching destination target. DAMON
sysfs interface is not letting users set the field for now, so there is no
problem. However, the following commit will support that. Also there
could be similar future changes that making commit fails based on current
context structure.
Make the test purpose commit destination context similar to the current
running one, by committing the running one to the test purpose context,
before doing the real test-purpose commit.
Link: https://lkml.kernel.org/r/20251023012535.69625-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: support pin-point targets removal".
DAMON maintains the targets in a list, and allows committing only an
entire list of targets having the new parameters. Targets having same
index on the lists are treated as matching source and destination
targets. If an existing target cannot find a matching one in the
sources list, the target is removed. This means that there is no way to
remove only a specific monitoring target in the middle of the current
targets list.
Such pin-point target removal is really needed in some use cases,
though. Monitoring access patterns on virtual address spaces of
processes that spawned from the same ancestor is one example. If a
process of the group is terminated, the user may want to remove the
matching DAMON target as soon as possible, to save in-kernel memory
usage for the unnecessary target data. The user may also want to do
that without turning DAMON off or removing unnecessary targets, to keep
the current monitoring results for other active processes.
Extend DAMON kernel API and sysfs ABI to support the pin-point removal
in the following way. For API, add a new damon_target field, namely
'obsolete'. If the field on parameters commit source target is set, it
means the matching destination target is obsolete. Then the parameters
commit logic removes the destination target from the existing targets
list. For sysfs ABI, add a new file under the target directory, namely
'obsolete_target'. It is connected with the 'obsolete' field of the
commit source targets, so internally using the new API.
Also add a selftest for the new feature. The related helper scripts for
manipulating the sysfs interface and dumping in-kernel DAMON status are
also extended for this. Note that the selftest part was initially
posted as an individual RFC series [1], but now merged into this one.
Bijan Tabatabai has originally reported this issue, and participated in
this solution design on a GitHub issue [1] for DAMON user-space tool.
This patch (of 9):
DAMON's monitoring targets parameters update function,
damon_commit_targets(), is not providing a way to remove a target in the
middle of the existing targets list. Extend the API by adding a field to
struct damon_target. If the field of a damon_commit_targets() source
target is set, it indicates the matching target on the existing targets
list is obsolete. damon_commit_targets() understands that and removes
those from the list, while respecting the index based matching for other
non-obsolete targets.
Link: https://lkml.kernel.org/r/20251023012535.69625-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251023012535.69625-2-sj@kernel.org
Link: https://github.com/damonitor/damo/issues/36 [1]
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allow to override defaults for shemem and tmpfs at config time. This is
consistent with how transparent hugepages can be configured.
Same results can be achieved with the existing
'transparent_hugepage_shmem' and 'transparent_hugepage_tmpfs' settings in
the kernel command line, but it is more convenient to define basic
settings at config time instead of changing kernel command line later.
Defaults for shmem and tmpfs were not changed. They are remained the same
as before: 'never' for both cases. Options 'deny' and 'force' are omitted
intentionally since these are special values and supposed to be used for
emergencies or testing and are not expected to be permanent ones.
Primary motivation for adding config option is to enable policy
enforcement at build time. In large-scale production environments (Meta's
for example), the kernel configuration is often maintained centrally close
to the kernel code itself and owned by the kernel engineers, while boot
parameters are managed independently (e.g. by provisioning systems). In
such setups, the kernel build defines the supported and expected behavior
in a single place, but there is no reliable or uniform control over the
kernel command line options.
A build-time default allows kernel integrators to enforce a predictable
hugepage policy for shmem/tmpfs on a base layer, ensuring reproducible
behavior and avoiding configuration drift caused by possible boot-time
differences.
In short, primary benefit is mostly operational: it provides a way to
codify preferred policy in the kernel configuration, which is versioned,
reviewed, and tested as part of the kernel build process, rather than
depending on potentially variable boot parameters.
[d@ilvokhin.com: v2]
Link: https://lkml.kernel.org/r/aQECPpjd-fU_TC79@shell.ilvokhin.com
Link: https://lkml.kernel.org/r/aPpv8sAa2sYgNu3L@shell.ilvokhin.com
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit a983a26d52 ("mm/damon/stat: expose negative idle time")
introduced the negative idle time feature for DAMON_STAT. But it is not
documented. Document it on the usage document.
Link: https://lkml.kernel.org/r/20251026182216.118200-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit cc7ceb1d14 ("mm/damon/stat: expose the current tuned aggregation
interval"), has introduced 'aggr_interval_us' parameter for DAMON_STAT.
But the new parameter is not yet documented. Document it on the usage
document for the module.
Link: https://lkml.kernel.org/r/20251026182216.118200-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 2e0fe9245d ("mm/damon/lru_sort: support addr_unit for
DAMON_LRU_SORT") introduced the 'addr_unit' parameter for DAMON_LRU_SORT.
But the usage document is not updated for that. Update the document.
Link: https://lkml.kernel.org/r/20251026182216.118200-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 7db551fcfb ("mm/damon/reclaim: support addr_unit for
DAMON_RECLAIM") introduced the 'addr_unit' parameter for DAMON_RECLAIM.
But the usage document is not updated for that. Update the document.
Link: https://lkml.kernel.org/r/20251026182216.118200-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Committing a monitoring target with empty target regions is for keeping
the current monitoring results. This behavior was introduced by commit
9732336006 ("mm/damon/sysfs: update monitoring target regions for online
input commit"). The behavior is not documented, though. Update the usage
document for clarifying this behavior.
Link: https://lkml.kernel.org/r/20251026182216.118200-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is a contextual typo. Fix it.
Link: https://lkml.kernel.org/r/20251026182216.118200-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit b243d666d1 ("Docs/admin-guide/mm/damon/usage: add intervals_goal
directory on the hierarchy") mistakenly added a wrong reference for
intervals goal usage documentation on the design document. Fix it.
Link: https://lkml.kernel.org/r/20251026182216.118200-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: misc documentation fixups".
First three patches fix up issues in the documents, including wrong
explanation of a behavior, wrong link, and a contextual typo. Following
five patches update documents for not yet documented features and
behaviors.
This patch (of 8):
damon_call() works asynchronously and synchronously for repeat and
non-repeat mode requests, respectively. The comment about the behavior is
wrong, though. Fix it.
The wrong comment was introduced together with the repeat mode, by commit
43df7676e5 ("mm/damon/core: introduce repeat mode damon_call()").
Link: https://lkml.kernel.org/r/20251026182216.118200-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251026182216.118200-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The order argument was introduced by an intermediate commit and was then
never used, just remove it.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-5-a709469052e7@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This helper was used when swap cache was mixed with page cache. Now they
are completely separate from each other, access to the swap cache is all
wrapped by the swap_cache_* helpers, which expect the folio's swap entry
as a parameter.
This helper is no longer used, remove the last redundant user and drop it.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-4-a709469052e7@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We no longer need this GFP parameter after commit 8578e0c00d ("mm, swap:
use the swap table for the swap cache and switch API"). Before that
commit the GFP parameter is already almost identical for all callers, so
nothing changed by that commit. Swap table just moved the GFP to lower
layer and make it more defined and changes depend on atomic or sleep
allocation.
Now this parameter is no longer used, just remove it. No behavior change.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-3-a709469052e7@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The name inc_cluster_info_page is very confusing, as this helper is only
used during swapon to mark bad slots. Rename it properly and turn the
VM_BUG_ON in it into WARN_ON to expose more potential issues. Swapon is a
cold path, so adding more checks should be a good idea.
No feature change except new WARN_ON.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-2-a709469052e7@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, swap: misc cleanup and bugfix", v2.
A few cleanups and a bugfix that are either suitable after the swap table
phase I or found during code review.
Patch 1 is a bugfix and needs to be included in the stable branch, the
rest have no behavioral change.
This patch (of 5):
Since commit 1b7e90020e ("mm, swap: use percpu cluster as allocation
fast path"), swap allocation is protected by a local lock, which means we
can't do any sleeping calls during allocation.
However, the discard routine is not taken well care of. When the swap
allocator failed to find any usable cluster, it would look at the pending
discard cluster and try to issue some blocking discards. It may not
necessarily sleep, but the cond_resched at the bio layer indicates this is
wrong when combined with a local lock. And the bio GFP flag used for
discard bio is also wrong (not atomic).
It's arguable whether this synchronous discard is helpful at all. In most
cases, the async discard is good enough. And the swap allocator is doing
very differently at organizing the clusters since the recent change, so it
is very rare to see discard clusters piling up.
So far, no issues have been observed or reported with typical SSD setups
under months of high pressure. This issue was found during my code
review. But by hacking the kernel a bit: adding a mdelay(500) in the
async discard path, this issue will be observable with WARNING triggered
by the wrong GFP and cond_resched in the bio layer for debug builds.
So now let's apply a hotfix for this issue: remove the synchronous discard
in the swap allocation path. And when order 0 is failing with all cluster
list drained on all swap devices, try to do a discard following the swap
device priority list. If any discards released some cluster, try the
allocation again. This way, we can still avoid OOM due to swap failure if
the hardware is very slow and memory pressure is extremely high.
This may cause more fragmentation issues if the discarding hardware is
really slow. Ideally, we want to discard pending clusters before
continuing to iterate the fragment cluster lists. This can be implemented
in a cleaner way if we clean up the device list iteration part first.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-0-a709469052e7@tencent.com
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-1-c5b0e1092927@tencent.com
Fixes: 1b7e90020e ("mm, swap: use percpu cluster as allocation fast path")
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Folio splitting requires both the folio's original order (@old_order) and
the new target order (@split_order).
In the current implementation, @old_order is repeatedly retrieved using
folio_order().
However, for every iteration after the first, the folio being split is the
result of the previous split, meaning its order is already known to be
equal to the previous iteration's @split_order.
This commit optimizes the logic:
* Instead of calling folio_order(), we now set @old_order directly to
the value of @split_order from the previous iteration.
This change avoids unnecessary function calls and simplifies the loop
setup.
Also it removes a check for non-existent case, since for uniform splitting
we only do split when @split_order == @new_order.
Link: https://lkml.kernel.org/r/20251021212142.25766-5-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The loop executed after a successful folio split currently has two
combined responsibilities:
* updating statistics for the new folios
* determining the folio for the next split iteration.
This commit refactors the logic to directly calculate and update folio
statistics, eliminating the need for the iteration step.
We can do this because all necessary information is already available:
* All resulting new folios have the same order, which is @split_order.
* The exact number of new folios can be calculated directly using
@old_order and @split_order.
* The folio for the subsequent split is simply the one containing
@split_at.
By leveraging this knowledge, we can achieve the stat update more cleanly
and efficiently without the looping logic.
Link: https://lkml.kernel.org/r/20251021212142.25766-4-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current implementation complicates this process:
* It iterates over the resulting new folios.
* It uses a flag (@stop_split) to conditionally skip updating the stat
for the folio at @split_at during the loop.
* It then attempts to update the skipped stat on a subsequent failure
path.
This logic is unnecessarily hard to follow.
This commit refactors the code to update the folio statistics only after a
successful split. This makes the logic much cleaner and sets the stage
for further simplification of the stat-handling code.
Link: https://lkml.kernel.org/r/20251021212142.25766-3-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/huge_memory: cleanup __split_unmapped_folio()", v3.
This patch series cleans up and optimizes the internal logic of the
__split_unmapped_folio() function.
The goal is to improve clarity and efficiency by eliminating redundant
checks, caching stable attribute values, and simplifying the iteration
logic used for updating folio statistics.
These changes make the code easier to follow and maintain.
The split_huge_page_test selftest pass.
This patch (of 4):
During the execution of __split_unmapped_folio(), the folio's anon/!anon
attribute is invariant (not expected to change).
Therefore, it is safe and more efficient to retrieve this attribute once
at the start and reuse it throughout the function.
Link: https://lkml.kernel.org/r/20251021212142.25766-1-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20251016004613.514-1-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20251016004613.514-2-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20251021212142.25766-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce a new IOMMU interface to flush IOTLB paging cache entries for
the CPU kernel address space. This interface is invoked from the x86
architecture code that manages combined user and kernel page tables,
specifically before any kernel page table page is freed and reused.
This addresses the main issue with vfree() which is a common occurrence
and can be triggered by unprivileged users. While this resolves the
primary problem, it doesn't address some extremely rare case related to
memory unplug of memory that was present as reserved memory at boot, which
cannot be triggered by unprivileged users. The discussion can be found at
the link below.
Enable SVA on x86 architecture since the IOMMU can now receive
notification to flush the paging cache before freeing the CPU kernel page
table pages.
Link: https://lkml.kernel.org/r/20251022082635.2462433-9-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/linux-iommu/04983c62-3b1d-40d4-93ae-34ca04b827e5@intel.com/
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Jann Horn <jannh@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This introduces a conditional asynchronous mechanism, enabled by
CONFIG_ASYNC_KERNEL_PGTABLE_FREE. When enabled, this mechanism defers the
freeing of pages that are used as page tables for kernel address mappings.
These pages are now queued to a work struct instead of being freed
immediately.
This deferred freeing allows for batch-freeing of page tables, providing a
safe context for performing a single expensive operation (TLB flush) for a
batch of kernel page tables instead of performing that expensive operation
for each page table.
Link: https://lkml.kernel.org/r/20251022082635.2462433-8-baolu.lu@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kernel's memory management subsystem provides a dedicated interface,
pagetable_free(), for freeing page table pages. Updates two call sites to
use pagetable_free() instead of the lower-level __free_page() or
free_pages(). This improves code consistency and clarity, and ensures the
correct freeing mechanism is used.
Link: https://lkml.kernel.org/r/20251022082635.2462433-7-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The pages used for ptdescs are currently freed back to the allocator in a
single location. They will shortly be freed from a second location.
Create a simple helper that just frees them back to the allocator.
Link: https://lkml.kernel.org/r/20251022082635.2462433-6-baolu.lu@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are a billion ways to refer to a physical memory address. One of
the x86 PMD freeing code location chooses to use a 'pte_t *' to point to a
PMD page and then call a PTE-specific freeing function for it. That's a
bit wonky.
Just use a 'struct ptdesc *' instead. Its entire purpose is to refer to
page table pages. It also means being able to remove an explicit cast.
Right now, pte_free_kernel() is a one-liner that calls
pagetable_dtor_free(). Effectively, all this patch does is remove one
superfluous __pa(__va(paddr)) conversion and then call
pagetable_dtor_free() directly instead of through a helper.
Link: https://lkml.kernel.org/r/20251022082635.2462433-5-baolu.lu@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that the API is in place, mark kernel page table pages just after they
are allocated. Unmark them just before they are freed.
Note: Unconditionally clearing the 'kernel' marking (via
ptdesc_clear_kernel()) would be functionally identical to what is here.
But having the if() makes it logically clear that this function can be
used for kernel and non-kernel page tables.
Link: https://lkml.kernel.org/r/20251022082635.2462433-4-baolu.lu@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page tables used to map the kernel and userspace often have very
different handling rules. There are frequently *_kernel() variants of
functions just for kernel page tables. That's not great and has lead to
code duplication.
Instead of having completely separate call paths, allow a 'ptdesc' to be
marked as being for kernel mappings. Introduce helpers to set and clear
this status.
Note: this uses the PG_referenced bit. Page flags are a great fit for
this since it is truly a single bit of information. Use PG_referenced
itself because it's a fairly benign flag (as opposed to things like
PG_lock). It's also (according to Willy) unlikely to go away any time
soon.
PG_referenced is not in PAGE_FLAGS_CHECK_AT_FREE. It does not need to be
cleared before freeing the page, and pages coming out of the allocator
should have it cleared. Regardless, introduce an API to clear it anyway.
Having symmetry in the API makes it easier to change the underlying
implementation later, like if there was a need to move to a
PAGE_FLAGS_CHECK_AT_FREE bit.
Link: https://lkml.kernel.org/r/20251022082635.2462433-3-baolu.lu@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix stale IOTLB entries for kernel address space", v7.
This proposes a fix for a security vulnerability related to IOMMU Shared
Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel
page table entries. When a kernel page table page is freed and
reallocated for another purpose, the IOMMU might still hold stale,
incorrect entries. This can be exploited to cause a use-after-free or
write-after-free condition, potentially leading to privilege escalation or
data corruption.
This solution introduces a deferred freeing mechanism for kernel page
table pages, which provides a safe window to notify the IOMMU to
invalidate its caches before the page is reused.
This patch (of 8):
In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware
shares and walks the CPU's page tables. The x86 architecture maps the
kernel's virtual address space into the upper portion of every process's
page table. Consequently, in an SVA context, the IOMMU hardware can walk
and cache kernel page table entries.
The Linux kernel currently lacks a notification mechanism for kernel page
table changes, specifically when page table pages are freed and reused.
The IOMMU driver is only notified of changes to user virtual address
mappings. This can cause the IOMMU's internal caches to retain stale
entries for kernel VA.
Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when
kernel page table pages are freed and later reallocated. The IOMMU could
misinterpret the new data as valid page table entries. The IOMMU might
then walk into attacker-controlled memory, leading to arbitrary physical
memory DMA access or privilege escalation. This is also a
Write-After-Free issue, as the IOMMU will potentially continue to write
Accessed and Dirty bits to the freed memory while attempting to walk the
stale page tables.
Currently, SVA contexts are unprivileged and cannot access kernel
mappings. However, the IOMMU will still walk kernel-only page tables all
the way down to the leaf entries, where it realizes the mapping is for the
kernel and errors out. This means the IOMMU still caches these
intermediate page table entries, making the described vulnerability a real
concern.
Disable SVA on x86 architecture until the IOMMU can receive notification
to flush the paging cache before freeing the CPU kernel page table pages.
Link: https://lkml.kernel.org/r/20251022082635.2462433-1-baolu.lu@linux.intel.com
Link: https://lkml.kernel.org/r/20251022082635.2462433-2-baolu.lu@linux.intel.com
Fixes: 26b25a2b98 ("iommu: Bind process address spaces to devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__memcg_memory_event() has been unnecessarily marked inline even when it
is not really performance critical. It is usually called to track extreme
conditions. Over the time, it has evolved to include more functionality
and inlining it is causing more harm.
Before the patch:
$ size mm/memcontrol.o net/ipv4/tcp_input.o net/ipv4/tcp_output.o
text data bss dec hex filename
35645 10574 4192 50411 c4eb mm/memcontrol.o
54738 1658 0 56396 dc4c net/ipv4/tcp_input.o
34644 1065 0 35709 8b7d net/ipv4/tcp_output.o
After the patch:
$ size mm/memcontrol.o net/ipv4/tcp_input.o net/ipv4/tcp_output.o
text data bss dec hex filename
35137 10446 4192 49775 c26f mm/memcontrol.o
54322 1562 0 55884 da4c net/ipv4/tcp_input.o
34492 1017 0 35509 8ab5 net/ipv4/tcp_output.o
[akpm@linux-foundation.org: use EXPORT_SYMBOL_GPL for __memcg_memory_event, per Michal and Christoph]
Link: https://lkml.kernel.org/r/20251021234425.1885471-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sometimes, vm_area_alloc_pages() will want many pages from the buddy
allocator. Rather than making requests to the buddy allocator for at most
100 pages at a time, we can eagerly request large order pages a smaller
number of times.
We still split the large order pages down to order-0 as the rest of the
vmalloc code (and some callers) depend on it. We still defer to the bulk
allocator and fallback path in case of order-0 pages or failure.
Running 1000 iterations of allocations on a small 4GB system finds:
1000 2mb allocations:
[Baseline] [This patch]
real 46.310s real 0m34.582
user 0.001s user 0.006s
sys 46.058s sys 0m34.365s
10000 200kb allocations:
[Baseline] [This patch]
real 56.104s real 0m43.696
user 0.001s user 0.003s
sys 55.375s sys 0m42.995s
Link: https://lkml.kernel.org/r/20251021194455.33351-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The commit that removed support for destructors from kmem_cache_alloc()
never removed the comment regarding destructors in the explanation of the
possible relocation of the free pointer in calculate_sizes().
Link: https://lkml.kernel.org/r/20251021110004.2209008-1-william.kucharski@oracle.com
Fixes: 20c2df83d2 ("mm: Remove slab destructors from kmem_cache_create().")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Christoph Lameter (Ampere) <cl@gentwo.org>
Acked-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both scan_sleep_millisecs_store() and alloc_sleep_millisecs_store()
perform the same operations: parse the input value, update their
respective sleep interval, reset khugepaged_sleep_expire, and wake up the
khugepaged thread.
Factor out this duplicated logic into a helper function
__sleep_millisecs_store(), and simplify both store functions.
No functional change intended.
Link: https://lkml.kernel.org/r/20251021134431.26488-1-leon.hwang@linux.dev
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Nico Pache <npache@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The TODO comment in nid_show() suggested returning an error if the goal
was not using nid. However, this comment was found to be inaccurate and
misleading.This patch removes the TODO comment without changing any
existing behavior.
This change follows feedback from SJ who pointed out [1] that wiring-order
independence is expected and the function should simply show the last set
value. and [2] checkpatch.pl complain about number of chars per line
No functional code changes were made.
Tested with KUnit:
- Built kernel with KUnit and DAMON sysfs tests enabled.
- Executed KUnit tests:
./tools/testing/kunit/kunit.py run --kunitconfig ./mm/damon/tests/
- All 25 tests passed, including damon_sysfs_test_add_targets.
Link: https://lkml.kernel.org/r/20251021215323.29734-2-swarajgaikwad1925@gmail.com
Link: https://lore.kernel.org/lkml/20251020151315.66260-1-sj@kernel.org/ [1]
Link: https://lore.kernel.org/lkml/20251021010847.68473-1-sj@kernel.org/ [2]
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Suggested-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hunter <david.hunter.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The number of NUMA nodes (nr_node_ids) is bounded, so overflow is not a
practical concern here. However, using kmalloc_array() better reflects
the intent to allocate an array of unsigned ints, and improves consistency
with other NUMA-related allocations.
No functional change intended.
Link: https://lkml.kernel.org/r/20251018201207.27441-1-mehdi.benhadjkhelifa@gmail.com
Signed-off-by: Mehdi Ben Hadj Khelifa <mehdi.benhadjkhelifa@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Khalid Aziz <khalid@kernel.org>
Cc: David Hunter <david.hunter.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
