Improve documentation by giving an overview of the components involved
in the generation of the CDCLK.
v2: Fix htmldoc error because of missing blank line at the start of
bulleted list.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221185131.287302-2-gustavo.sousa@intel.com
Looks like the name and description of intel_cdclk_needs_modeset()
became inaccurate as of commit 59f9e9cab3 ("drm/i915: Skip modeset for
cdclk changes if possible"), when it became possible to update the cdclk
without requiring disabling the pipes when only changing the cd2x
divider was enough.
Later on we also added the same type of support with squash and crawling
with commit 25e0e5ae56 ("drm/i915/display: Do both crawl and squash
when changing cdclk"), commit d4a2393049 ("drm/i915: Allow cdclk
squasher to be reconfigured live") and commit d62686ba3b
("drm/i915/adl_p: CDCLK crawl support for ADL").
As such, update that function's name and documentation to something more
appropriate, since the real checks for requiring modeset are done
elsewhere.
v2:
- Rename to intel_cdclk_clock_changed instead of
intel_cdclk_params_changed. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214202719.298407-2-gustavo.sousa@intel.com
Detect DP tunnels and enable the BW allocation mode on them. Send a
hotplug notification to userspace in response to a BW change.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-22-imre.deak@intel.com
The TBT DP tunnel BW request logic in the Thunderbolt Connection Manager
depends on the GFX driver reading out the sink's DPRX capabilities in
response to a long HPD pulse. Since in i915 this read-out can be blocked
by another connector's/encoder's hotplug event handling (which is
serialized by drm_mode_config::connection_mutex), do a dummy DPRX read-out
in the encoder's HPD pulse handler (which is not blocked by other
encoders).
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-21-imre.deak@intel.com
Suspend and resume DP tunnels during system suspend/resume, disabling
the BW allocation mode during suspend, re-enabling it after resume. This
reflects the link's BW management component (Thunderbolt CM) disabling
BWA during suspend. Before any BW requests the driver must read the
sink's DPRX capabilities (since the BW manager requires this
information, so snoops for it on AUX), so ensure this read takes place.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-20-imre.deak@intel.com
A follow-up change will need to resume DP tunnels during system resume,
so call intel_dp_sync_state() always for DDI encoders, so this function
can resume the tunnels for all DP connectors.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-19-imre.deak@intel.com
Handle DP tunnel IRQs a sink (or rather a BW management component like
the Thunderbolt Connection Manager) raises to signal the completion of a
BW request by the driver, or to signal any state change related to the
link BW.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-18-imre.deak@intel.com
Allocate and free the DP tunnel BW required by a stream while
enabling/disabling the stream during a modeset.
v2:
- Move the allocation up from encoder hooks to
intel_atomic_commit_tail().
v3:
- Update the commit subject. (Ville)
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-17-imre.deak@intel.com
Compute the BW required through a DP tunnel on links with such tunnels
detected and add the corresponding atomic state during a modeset.
v2:
- Fix error check of intel_dp_tunnel_compute_stream_bw(). (Ville)
- Move intel_dp_tunnel_atomic_cleanup_inherited_state() to this patch.
(Ville)
- Move intel_dp_tunnel_atomic_clear_stream_bw() to this patch.
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-16-imre.deak@intel.com
Take any link BW limitation into account in
intel_dp_max_link_data_rate(). Such a limitation can be due to multiple
displays on (Thunderbolt) links with DP tunnels sharing the link BW.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-15-imre.deak@intel.com
Add the atomic state during a modeset required to enable the DP tunnel
BW allocation mode on links where such a tunnel was detected. This state
applies to an already enabled output, the state added for a newly
enabled output will be computed and added/cleared to/from the atomic
state in a follow-up patch.
v2:
- s/old_crtc_state/crtc_state in intel_crtc_duplicate_state().
- Move intel_dp_tunnel_atomic_cleanup_inherited_state() to a follow-up
patch adding the corresponding state. (Ville)
- Move intel_dp_tunnel_atomic_clear_stream_bw() to a follow-up
patch adding the corresponding state.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-14-imre.deak@intel.com
Add support to enable the DP tunnel BW allocation mode. Follow-up
patches will call the required helpers added here to prepare for a
modeset on a link with DP tunnels, the last change in the patchset
actually enabling BWA.
With BWA enabled, the driver will expose the full mode list a display
supports, regardless of any BW limitation on a shared (Thunderbolt)
link. Such BW limits will be checked against only during a modeset, when
the driver has the full knowledge of each display's BW requirement.
If the link BW changes in a way that a connector's modelist may also
change, userspace will get a hotplug notification for all the connectors
sharing the same link (so it can adjust the mode used for a display).
The BW limitation can change at any point, asynchronously to modesets
on a given connector, so a modeset can fail even though the atomic check
for it passed. In such scenarios userspace will get a bad link
notification and in response is supposed to retry the modeset.
v2:
- Fix old vs. new connector state in intel_dp_tunnel_atomic_check_state().
(Ville)
- Fix propagating the error from
intel_dp_tunnel_atomic_compute_stream_bw(). (Ville)
- Move tunnel==NULL checks from driver to DRM core helpers. (Ville)
- Simplify return flow from intel_dp_tunnel_detect(). (Ville)
- s/dp_tunnel_state/inherited_dp_tunnels (Ville)
- Simplify struct intel_dp_tunnel_inherited_state. (Ville)
- Unconstify object pointers (vs. states) where possible. (Ville)
- Init crtc_state while declaring it in check_group_state(). (Ville)
- Join obj->base.id, obj->name arg lines in debug prints to reduce LOC.
(Ville)
- Add/rework intel_dp_tunnel_atomic_alloc_bw() to prepare for moving the
BW allocation from encoder hooks up to intel_atomic_commit_tail()
later in the patchset.
- Disable BW alloc mode during system suspend.
- Allocate the required BW for all tunnels during system resume.
- Add intel_dp_tunnel_atomic_clear_stream_bw() instead of the open-coded
sequence in a follow-up patch.
- Add function documentation to all exported functions.
- Add CONFIG_USB4 dependency to CONFIG_DRM_I915_DP_TUNNEL.
v3:
- Rebase on intel_dp_get_active_pipes() change in previous patch.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-4-imre.deak@intel.com
Sync instead of only try-sync non-blocking commits when getting the
active pipes through a given DP port. Atm intel_dp_get_active_pipes()
will only try to sync a given pipe and if that would block ignore the
pipe. This was supposed to avoid link retraining in case a pending
modeset would do that anyway, however that could incorrectly ignore
fastset pipes as well for instance (which don't retraing the link).
The TC port reset path needs to handle all pipes, even if a waiting for
a pending commit would block. To account for the above cases sync all
the pipes unconditionally.
This also prepares for a follow-up change enabling the DP tunnel BW
allocation mode which needs to ensure that all active pipes are synced
and returned from intel_dp_get_active_pipes().
v2:
- Add a separate function to try-sync the pipes. (Ville)
v3:
- Just sync the pipes unconditionally in intel_dp_get_active_pipes().
(Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-3-imre.deak@intel.com
Add intel_dp_max_link_data_rate() to get the link BW vs. the sink DPRX
BW used by a follow-up patch enabling the DP tunnel BW allocation mode.
The link BW can be below the DPRX BW due to a BW limitation on a link
shared by multiple sinks.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-11-imre.deak@intel.com
Factor out a function to read the sink's DPRX capabilities used by a
follow-up patch enabling the DP tunnel BW allocation mode.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-10-imre.deak@intel.com
Factor out a function updating the sink's link rate and lane count
capabilities, used by a follow-up patch enabling the DP tunnel BW
allocation mode.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-9-imre.deak@intel.com
Export intel_dp_max_common_rate() and intel_dp_max_lane_count() used by
a follow-up patch enabling the DP tunnel BW allocation mode.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-8-imre.deak@intel.com
Factor out intel_dp_config_required_rate() used by a follow-up patch
enabling the DP tunnel BW allocation mode.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-7-imre.deak@intel.com
Instead of intel_dp_max_data_rate() use the equivalent
drm_dp_max_dprx_data_rate() which was copied from the former one in a
previous patch.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-6-imre.deak@intel.com
On shared (Thunderbolt) links with DP tunnels, the modeset may need to
be retried on all connectors on the link due to a link BW limitation
arising only after the atomic check phase. To support this add a helper
function queuing a work to retry the modeset on a given port's connector
and at the same time any MST connector with streams through the same
port. A follow-up change enabling the DP tunnel Bandwidth Allocation
Mode will take this into use.
v2:
- Send the uevent only to enabled MST connectors. (Jouni)
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-5-imre.deak@intel.com
The system resume display mode restoration should happen with an output
configuration matching that of the suspend time saved mode. Since the
restored mode configuration is subject to the bpp fallback logic,
starting out with an unlimited bpp and reducing the bpp as required by
any (MST) link BW limit, the resulting bpp will match the one during
suspend only if the BW limit checks during suspend and resume are
applied in an identical way. The latter is not guaranteed at the moment,
since the pre-suspend MST topology may not be in place during resume
(for instance if the MST sink was disconnected while being suspended),
which makes the MST link BW check accept the unlimited bpp mode
configuration unconditionally without ensuring that the required BW fits
into the available MST link BW.
To fix the above, initialize the bpp fallback logic with the max link
bpp / force-FEC limits left behind by the suspend time mode save.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-4-imre.deak@intel.com
Add support for Display Port tunneling. For now this includes the
support for Bandwidth Allocation Mode (BWA), leaving adding Panel Replay
support for later.
BWA allows using displays that share the same (Thunderbolt) link with
their maximum resolution. Atm, this may not be possible due to the
coarse granularity of partitioning the link BW among the displays on the
link: the BW allocation policy is in a SW/FW/HW component on the link
(on Thunderbolt it's the SW or FW Connection Manager), independent of
the driver. This policy will set the DPRX maximum rate and lane count
DPCD registers the GFX driver will see (0x00000, 0x00001, 0x02200,
0x02201) based on the available link BW.
The granularity of the current BW allocation policy is coarse, based on
the required link rate in the 1.62Gbs..8.1Gbps range and it may prevent
using higher resolutions all together: the display connected first will
get a share of the link BW which corresponds to its full DPRX capability
(regardless of the actual mode it uses). A subsequent display connected
will only get the remaining BW, which could be well below its full
capability.
BWA solves the above coarse granularity (reducing it to a 250Mbs..1Gps
range) and first-come/first-served issues by letting the driver request
the BW for each display on a link which reflects the actual modes the
displays use.
This patch adds the DRM core helper functions, while a follow-up change
in the patchset takes them into use in the i915 driver.
v2:
- Fix prepare_to_wait vs. wake-up cond check order in
allocate_tunnel_bw(). (Ville)
- Move tunnel==NULL checks from callers in drivers to here. (Ville)
- Avoid var inits in declaration blocks that can fail or have
side-effects. (Ville)
- Use u8 for driver and group IDs. (Ville)
- Simplify API removing drm_dp_tunnel_get/put_untracked(). (Ville)
- Reuse str_yes_no() instead of a local yes_no_chr(). (Ville)
- s/drm_dp_tunnel_atomic_clear_state()/free_tunnel_state() and unexport
the function. (Ville)
- s/clear_tunnel_group_state()/free_group_state() and move kfree() to
this function. (Ville)
- Add separate group_free_bw() helper and describe what the tunnel
estimated BW includes. (Ville)
- Improve help text for CONFIG_DRM_DISPLAY_DP_TUNNEL. (Ville)
- Add code comment explaining the purpose of DPCD reg read helpers.
(Ville)
- Add code comment describing the tunnel group name prefix format.
(Ville)
- Report the allocated BW as undetermined until the first allocation
request.
- Skip allocation requests matching the previous request.
- Clear any stale BW request status flags before a new request.
- Add missing error return check of drm_dp_tunnel_atomic_get_group_state()
in drm_dp_tunnel_atomic_set_stream_bw().
- Add drm_dp_tunnel_get_allocated_bw().
- s/drm_dp_tunnel_atomic_get_tunnel_bw/drm_dp_tunnel_atomic_get_required_bw
- Fix return value description in function doc of drm_dp_tunnel_detect().
- Add function documentation to all exported functions.
v3:
- Improve grouping of fields in drm_dp_tunnel_group struct. (Uma)
- Fix validating the BW granularity DPCD reg value. (Uma)
- Document return value of check_and_clear_status_change(). (Uma)
- Fix resetting drm_dp_tunnel_ref::tunnel in drm_dp_tunnel_ref_put().
(Ville)
- Allow for ALLOCATED_BW to change after a BWA enable/disable sequence.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-2-imre.deak@intel.com
Copy intel_dp_max_data_rate() to DRM core. It will be needed by a
follow-up DP tunnel patch, checking the maximum rate the DPRX (sink)
supports. Accordingly use the drm_dp_max_dprx_data_rate() name for
clarity. This patchset will also switch calling the new DRM function
in i915 instead of intel_dp_max_data_rate().
While at it simplify the function documentation/comments, removing
parts described already by drm_dp_bw_channel_coding_efficiency().
v2: (Ville)
- Remove max_link_rate_kbps.
- Simplify the function documentation.
v3:
- Rebased on latest drm-tip.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-1-imre.deak@intel.com
Now that the main DRM tree has moved to Gitlab, adjust the MAINTAINERS
git trees to reflect the location change.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240226152123.131406-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We see some monitors and docks report incorrect hdcp version
and capability in first few reads so we read rx_caps three times
before we conclude the monitor's or docks HDCP capability
--v2
-Add comment to justify the 3 time read loop for hdcp capability[Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-7-suraj.kandpal@intel.com
Allocate stream id after HDCP AKE stage and not before so that it
can also be done during link integrity check.
Right now for MST scenarios LIC fails after hdcp enablement for this
reason.
--v2
-no need for else block in prepare_streams function [Ankit]
--v3
-remove intel_hdcp argument from required_content_stream function
[Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-6-suraj.kandpal@intel.com
Whenever LIC fails instead of moving from ENABLED to DESIRED
CP property we directly enable HDCP1.4 without informing the userspace
of this failure in link integrity check.
Now we will just update the value to DESIRED send the event to
userspace and then continue with the normal flow of HDCP enablement.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-5-suraj.kandpal@intel.com
Whenever LIC fails instead of moving from ENABLED to DESIRED
CP property we directly enable HDCP2.2 without informing the userspace
of this failure in link integrity check.
Now we will just update the value to DESIRED send the event to
userspace and then continue with the normal flow of HDCP enablement.
--v2
-Don't change the function prototype in this function [Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-4-suraj.kandpal@intel.com
Currently intel_hdcp is not being extracted from primary connector
this patch fixes that.
Fixes: 524240b231 ("drm/i915/hdcp: Propagate aux info in DP HDCP functions")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-3-suraj.kandpal@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXb0T4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5YQH/3eCV90sNGch0Y94
8rtTdqFrVx7QPNl0pz+Mo6OUIKUUHvTuwime16ckLxG+3x2Y3I0MjP1edd1NB99C
Kje//JTpaZBPpTZ/jY4u8B1Shov2Drdx/J4NFnE/9rG6yXzKQBtvON/xAxXDCVHT
mLhst2LR0FeCSMk9jAX6CoqUPEgwlylNyAetKxaDQgoHl4GTZC7FDO17WxyjpIxe
1rVHsrV9Eq8kD4uxrzpTYWgZrwTObPmlZjvefa1JfzSwRNABIBJj/C1nra1Zc1oi
b7xVaXS1cMOxrtuuG00fmHsPnWivu0tuND7H3/yLd1mRCZAPSsVbVvrI/KNtoeV4
1euINlY=
=7IFt
-----END PGP SIGNATURE-----
Merge v6.8-rc6 into drm-next
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The notable changes are:
- New features and improvements:
- Configure interrupt affinity according to NUMA nodes for the MSI-X interrupts that are
assigned to the userspace application which acquires the device.
- Move the HBM MMU page tables to reside inside the HBM to minimize latency when doing
page-walks.
- Improve the device reset mechanism when consecutive heartbeat failures occur (firmware
fails to ack on heartbeat message).
- Check also extended errors in the PCIe addr_dec interrupt information.
- Rate limit the error messages that can be printed to dmesg log by userspace actions.
- Firmware related fixes:
- Handle requests from firmware to reserve device memory
- Bug fixes and code cleanups:
- constify the struct device_type usage in accel (accel_sysfs_device_minor).
- Fix the PCI health check by reading uncached register.
- Fix reporting of drain events.
- Fix debugfs files permissions.
- Fix calculation of DRAM BAR base address.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmXcSN4ACgkQZR1NuKta
54Cz1wf9F7e16PkqyJ3xow++s4Poj4uRbVxu4YVkRNtLKLmLbfcXal07QTJU08oL
wVGe9IaF1T1wDTqtTJsLKHO9iocSAFqlCiQkQ7v2DjKSdqjGShWGU8t/CDkq22F3
+MSQi6Zsgy3yUOppgXt7M2a7tD4pS/XyWyMs2E1NUzW2d0s9parlxdEknjX7dnAv
yYCsCvq5GGDt7q+TEaGySD8vU5ZP3bGG1hGtDstJ5Z2kbR4MHFS0Ms+dDNvjIPFW
Q5c/WtKIeAvbnsMOsF2JjqDRkyvaSrFyAyI3xqHQjXK65LK3F67BV1QOzlteJcdr
WSg5LnHwARi2REwlkj1PvcGDPYlSmA==
=mTWh
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2024-02-26' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver and accel changes for v6.9.
The notable changes are:
- New features and improvements:
- Configure interrupt affinity according to NUMA nodes for the MSI-X interrupts that are
assigned to the userspace application which acquires the device.
- Move the HBM MMU page tables to reside inside the HBM to minimize latency when doing
page-walks.
- Improve the device reset mechanism when consecutive heartbeat failures occur (firmware
fails to ack on heartbeat message).
- Check also extended errors in the PCIe addr_dec interrupt information.
- Rate limit the error messages that can be printed to dmesg log by userspace actions.
- Firmware related fixes:
- Handle requests from firmware to reserve device memory
- Bug fixes and code cleanups:
- constify the struct device_type usage in accel (accel_sysfs_device_minor).
- Fix the PCI health check by reading uncached register.
- Fix reporting of drain events.
- Fix debugfs files permissions.
- Fix calculation of DRAM BAR base address.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdxJprop0EniVQtf@ogabbay-vm-u22.habana-labs.com
UAPI Changes:
- New query to the GuC firmware submission version. (José Roberto de Souza)
- Remove unused persistent exec_queues (Thomas Hellström)
- Add vram frequency sysfs attributes (Sujaritha Sundaresan, Rodrigo Vivi)
- Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that mapping
should be dumped (Maarten Lankhorst)
Cross-drivers Changes:
- Make sure intel_wakeref_t is treated as opaque type on i915-display
and fix its type on xe
Driver Changes:
- Drop pre-production workarounds (Matt Roper)
- Drop kunit tests for unsuported platforms: PVC and pre-production DG2 (Lucas De Marchi)
- Start pumbling SR-IOV support with memory based interrupts
for VF (Michal Wajdeczko)
- Allow to map BO in GGTT with PAT index corresponding to
XE_CACHE_UC to work with memory based interrupts (Michal Wajdeczko)
- Improve logging with GT-oriented drm_printers (Michal Wajdeczko)
- Add GuC Doorbells Manager as prep work SR-IOV during
VF provisioning ((Michal Wajdeczko)
- Refactor fake device handling in kunit integration ((Michal Wajdeczko)
- Implement additional workarounds for xe2 and MTL (Tejas Upadhyay,
Lucas De Marchi, Shekhar Chauhan, Karthik Poosa)
- Program a few registers according to perfomance guide spec for Xe2 (Shekhar Chauhan)
- Add error handling for non-blocking communication with GuC (Daniele Ceraolo Spurio)
- Fix remaining 32b build issues and enable it back (Lucas De Marchi)
- Fix build with CONFIG_DEBUG_FS=n (Jani Nikula)
- Fix warnings from GuC ABI headers (Matthew Brost)
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF (Michal Wajdeczko)
- Add mocs reset kunit (Ruthuvikas Ravikumar)
- Fix spellings (Colin Ian King)
- Disable mid-thread preemption when not properly supported by hardware (Nirmoy Das)
- Release mmap mappings on rpm suspend (Badal Nilawar)
- Fix BUG_ON on xe_exec by moving fence reservation to the validate stage (Matthew Auld)
- Fix xe_exec by reserving extra fence slot for CPU bind (Matthew Brost)
- Fix xe_exec with full long running exec queue, now returning
-EWOULDBLOCK to userspace (Matthew Brost)
- Fix CT irq handler when CT is disabled (Matthew Brost)
- Fix VM_BIND_OP_UNMAP_ALL without any bound vmas (Thomas Hellström)
- Fix missing __iomem annotations (Thomas Hellström)
- Fix exec queue priority handling with GuC (Brian Welty)
- Fix setting SLPC flag to GuC when it's not supported (Vinay Belgaumkar)
- Fix C6 disabling without SLPC (Matt Roper)
- Drop -Wstringop-overflow to fix build with GCC11 (Paul E. McKenney)
- Circumvent bogus -Wstringop-overflow in one case (Arnd Bergmann)
- Refactor exec_queue user extensions handling and fix USM attributes
being applied too late (Brian Welty)
- Use circ_buf head/tail convention (Matthew Brost)
- Fail build if circ_buf-related defines are modified with incompatible values
(Matthew Brost)
- Fix several error paths (Dan Carpenter)
- Fix CCS copy for small VRAM copy chunks (Thomas Hellström)
- Rework driver initialization order and paths to account for driver running
in VF mode (Michal Wajdeczko)
- Initialize GuC earlier during probe to handle driver in VF mode (Michał Winiarski)
- Fix migration use of MI_STORE_DATA_IMM to write PTEs (Matt Roper)
- Fix bounds checking in __xe_bo_placement_for_flags (Brian Welty)
- Drop display dependency on CONFIG_EXPERT (Jani Nikula)
- Do not hand-roll kstrdup when creating snapshot (Michal Wajdeczko)
- Stop creating one kunit module per kunit suite (Lucas De Marchi)
- Reduce scope and constify variables (Thomas Hellström, Jani Nikula, Michal Wajdeczko)
- Improve and document xe_guc_ct_send_recv() (Michal Wajdeczko)
- Add proxy communication between CSME and GSC uC (Daniele Ceraolo Spurio)
- Fix size calculation when writing pgtable (Fei Yang)
- Make sure cfb is page size aligned in stolen memory (Vinod Govindapillai)
- Stop printing guc log to dmesg when waiting for GuC fails (Rodrigo Vivi)
- Use XE_CACHE_WB instead of XE_CACHE_NONE for cpu coherency on migration
(Himal Prasad Ghimiray)
- Fix error path in xe_vm_create (Moti Haimovski)
- Fix warnings in doc generation (Thomas Hellström, Badal Nilawar)
- Improve devcoredump content for mesa debugging (José Roberto de Souza)
- Fix crash in trace_dma_fence_init() (José Roberto de Souza)
- Improve CT state change handling (Matthew Brost)
- Toggle USM support for Xe2 (Lucas De Marchi)
- Reduces code duplication to emit PIPE_CONTROL (José Roberto de Souza)
- Canonicalize addresses where needed for Xe2 and add to devcoredump
(José Roberto de Souza)
- Only allow 1 ufence per exec / bind IOCTL (Matthew Brost)
- Move all display code to display/ (Jani Nikula)
- Fix sparse warnings by correctly using annotations (Thomas Hellström)
- Warn on job timeouts instead of using asserts (Matt Roper)
- Prefix macros to avoid clashes with sparc (Matthew Brost)
- Fix -Walloc-size by subclassing instead of allocating size smaller than struct (Thomas Hellström)
- Add status check during gsc header readout (Suraj Kandpal)
- Fix infinite loop in vm_bind_ioctl_ops_unwind() (Matthew Brost)
- Fix fence refcounting (Matthew Brost)
- Fix picking incorrect userptr VMA (Matthew Brost)
- Fix USM on integrated by mapping both mem.kernel_bb_pool and usm.bb_pool (Matthew Brost)
- Fix double initialization of display power domains (Xiaoming Wang)
- Check expected uC versions by major.minor.patch instead of just major.minor (John Harrison)
- Bump minimum GuC version to 70.19.2 for all platforms under force-probe
(John Harrison)
- Add GuC firmware loading for Lunar Lake (John Harrison)
- Use kzalloc() instead of hand-rolled alloc + memset (Nirmoy Das)
- Fix max page size of VMA during a REMAP (Matthew Brost)
- Don't ignore error when pinning pages in kthread (Matthew Auld)
- Refactor xe hwmon (Karthik Poosa)
- Add debug logs for D3cold (Riana Tauro)
- Remove broken TEST_VM_ASYNC_OPS_ERROR (Matthew Brost)
- Always allow to override firmware blob with module param and improve
log when no firmware is found (Lucas De Marchi)
- Fix shift-out-of-bounds due to xe_vm_prepare_vma() accepting zero fences (Thomas Hellström)
- Fix shift-out-of-bounds by distinguishing xe_pt/xe_pt_dir subclass (Thomas Hellström)
- Fail driver bind if platform supports MSIX, but fails to allocate all of them (Dani Liberman)
- Fix intel_fbdev thinking memory is backed by shmem (Matthew Auld)
- Prefer drm_dbg() over dev_dbg() (Jani Nikula)
- Avoid function cast warnings with clang-16 (Arnd Bergmann)
- Enhance xe_bo_move trace (Priyanka Dandamudi)
- Fix xe_vma_set_pte_size() not setting the right gpuva.flags for 4K size (Matthew Brost)
- Add XE_VMA_PTE_64K VMA flag (Matthew Brost)
- Return 2MB page size for compact 64k PTEs (Matthew Brost)
- Remove usage of the deprecated ida_simple_xx() API (Christophe JAILLET)
- Fix modpost warning on xe_mocs live kunit module (Ashutosh Dixit)
- Drop extra newline in from sysfs files (Ashutosh Dixit)
- Implement VM snapshot support for BO's and userptr (Maarten Lankhorst)
- Add debug logs when skipping rebinds (Matthew Brost)
- Fix code generation when mixing build directories (Dafna Hirschfeld)
- Prefer struct_size over open coded arithmetic (Erick Archer)
-----BEGIN PGP SIGNATURE-----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=nLHY
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-02-25' of ssh://gitlab.freedesktop.org/drm/xe/kernel into drm-next
drm/xe feature pull for v6.9:
UAPI Changes:
- New query to the GuC firmware submission version. (José Roberto de Souza)
- Remove unused persistent exec_queues (Thomas Hellström)
- Add vram frequency sysfs attributes (Sujaritha Sundaresan, Rodrigo Vivi)
- Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that mapping
should be dumped (Maarten Lankhorst)
Cross-drivers Changes:
- Make sure intel_wakeref_t is treated as opaque type on i915-display
and fix its type on xe
Driver Changes:
- Drop pre-production workarounds (Matt Roper)
- Drop kunit tests for unsuported platforms: PVC and pre-production DG2 (Lucas De Marchi)
- Start pumbling SR-IOV support with memory based interrupts
for VF (Michal Wajdeczko)
- Allow to map BO in GGTT with PAT index corresponding to
XE_CACHE_UC to work with memory based interrupts (Michal Wajdeczko)
- Improve logging with GT-oriented drm_printers (Michal Wajdeczko)
- Add GuC Doorbells Manager as prep work SR-IOV during
VF provisioning ((Michal Wajdeczko)
- Refactor fake device handling in kunit integration ((Michal Wajdeczko)
- Implement additional workarounds for xe2 and MTL (Tejas Upadhyay,
Lucas De Marchi, Shekhar Chauhan, Karthik Poosa)
- Program a few registers according to perfomance guide spec for Xe2 (Shekhar Chauhan)
- Add error handling for non-blocking communication with GuC (Daniele Ceraolo Spurio)
- Fix remaining 32b build issues and enable it back (Lucas De Marchi)
- Fix build with CONFIG_DEBUG_FS=n (Jani Nikula)
- Fix warnings from GuC ABI headers (Matthew Brost)
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF (Michal Wajdeczko)
- Add mocs reset kunit (Ruthuvikas Ravikumar)
- Fix spellings (Colin Ian King)
- Disable mid-thread preemption when not properly supported by hardware (Nirmoy Das)
- Release mmap mappings on rpm suspend (Badal Nilawar)
- Fix BUG_ON on xe_exec by moving fence reservation to the validate stage (Matthew Auld)
- Fix xe_exec by reserving extra fence slot for CPU bind (Matthew Brost)
- Fix xe_exec with full long running exec queue, now returning
-EWOULDBLOCK to userspace (Matthew Brost)
- Fix CT irq handler when CT is disabled (Matthew Brost)
- Fix VM_BIND_OP_UNMAP_ALL without any bound vmas (Thomas Hellström)
- Fix missing __iomem annotations (Thomas Hellström)
- Fix exec queue priority handling with GuC (Brian Welty)
- Fix setting SLPC flag to GuC when it's not supported (Vinay Belgaumkar)
- Fix C6 disabling without SLPC (Matt Roper)
- Drop -Wstringop-overflow to fix build with GCC11 (Paul E. McKenney)
- Circumvent bogus -Wstringop-overflow in one case (Arnd Bergmann)
- Refactor exec_queue user extensions handling and fix USM attributes
being applied too late (Brian Welty)
- Use circ_buf head/tail convention (Matthew Brost)
- Fail build if circ_buf-related defines are modified with incompatible values
(Matthew Brost)
- Fix several error paths (Dan Carpenter)
- Fix CCS copy for small VRAM copy chunks (Thomas Hellström)
- Rework driver initialization order and paths to account for driver running
in VF mode (Michal Wajdeczko)
- Initialize GuC earlier during probe to handle driver in VF mode (Michał Winiarski)
- Fix migration use of MI_STORE_DATA_IMM to write PTEs (Matt Roper)
- Fix bounds checking in __xe_bo_placement_for_flags (Brian Welty)
- Drop display dependency on CONFIG_EXPERT (Jani Nikula)
- Do not hand-roll kstrdup when creating snapshot (Michal Wajdeczko)
- Stop creating one kunit module per kunit suite (Lucas De Marchi)
- Reduce scope and constify variables (Thomas Hellström, Jani Nikula, Michal Wajdeczko)
- Improve and document xe_guc_ct_send_recv() (Michal Wajdeczko)
- Add proxy communication between CSME and GSC uC (Daniele Ceraolo Spurio)
- Fix size calculation when writing pgtable (Fei Yang)
- Make sure cfb is page size aligned in stolen memory (Vinod Govindapillai)
- Stop printing guc log to dmesg when waiting for GuC fails (Rodrigo Vivi)
- Use XE_CACHE_WB instead of XE_CACHE_NONE for cpu coherency on migration
(Himal Prasad Ghimiray)
- Fix error path in xe_vm_create (Moti Haimovski)
- Fix warnings in doc generation (Thomas Hellström, Badal Nilawar)
- Improve devcoredump content for mesa debugging (José Roberto de Souza)
- Fix crash in trace_dma_fence_init() (José Roberto de Souza)
- Improve CT state change handling (Matthew Brost)
- Toggle USM support for Xe2 (Lucas De Marchi)
- Reduces code duplication to emit PIPE_CONTROL (José Roberto de Souza)
- Canonicalize addresses where needed for Xe2 and add to devcoredump
(José Roberto de Souza)
- Only allow 1 ufence per exec / bind IOCTL (Matthew Brost)
- Move all display code to display/ (Jani Nikula)
- Fix sparse warnings by correctly using annotations (Thomas Hellström)
- Warn on job timeouts instead of using asserts (Matt Roper)
- Prefix macros to avoid clashes with sparc (Matthew Brost)
- Fix -Walloc-size by subclassing instead of allocating size smaller than struct (Thomas Hellström)
- Add status check during gsc header readout (Suraj Kandpal)
- Fix infinite loop in vm_bind_ioctl_ops_unwind() (Matthew Brost)
- Fix fence refcounting (Matthew Brost)
- Fix picking incorrect userptr VMA (Matthew Brost)
- Fix USM on integrated by mapping both mem.kernel_bb_pool and usm.bb_pool (Matthew Brost)
- Fix double initialization of display power domains (Xiaoming Wang)
- Check expected uC versions by major.minor.patch instead of just major.minor (John Harrison)
- Bump minimum GuC version to 70.19.2 for all platforms under force-probe
(John Harrison)
- Add GuC firmware loading for Lunar Lake (John Harrison)
- Use kzalloc() instead of hand-rolled alloc + memset (Nirmoy Das)
- Fix max page size of VMA during a REMAP (Matthew Brost)
- Don't ignore error when pinning pages in kthread (Matthew Auld)
- Refactor xe hwmon (Karthik Poosa)
- Add debug logs for D3cold (Riana Tauro)
- Remove broken TEST_VM_ASYNC_OPS_ERROR (Matthew Brost)
- Always allow to override firmware blob with module param and improve
log when no firmware is found (Lucas De Marchi)
- Fix shift-out-of-bounds due to xe_vm_prepare_vma() accepting zero fences (Thomas Hellström)
- Fix shift-out-of-bounds by distinguishing xe_pt/xe_pt_dir subclass (Thomas Hellström)
- Fail driver bind if platform supports MSIX, but fails to allocate all of them (Dani Liberman)
- Fix intel_fbdev thinking memory is backed by shmem (Matthew Auld)
- Prefer drm_dbg() over dev_dbg() (Jani Nikula)
- Avoid function cast warnings with clang-16 (Arnd Bergmann)
- Enhance xe_bo_move trace (Priyanka Dandamudi)
- Fix xe_vma_set_pte_size() not setting the right gpuva.flags for 4K size (Matthew Brost)
- Add XE_VMA_PTE_64K VMA flag (Matthew Brost)
- Return 2MB page size for compact 64k PTEs (Matthew Brost)
- Remove usage of the deprecated ida_simple_xx() API (Christophe JAILLET)
- Fix modpost warning on xe_mocs live kunit module (Ashutosh Dixit)
- Drop extra newline in from sysfs files (Ashutosh Dixit)
- Implement VM snapshot support for BO's and userptr (Maarten Lankhorst)
- Add debug logs when skipping rebinds (Matthew Brost)
- Fix code generation when mixing build directories (Dafna Hirschfeld)
- Prefer struct_size over open coded arithmetic (Erick Archer)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dbdkrwmcoqqlwftuc3olbauazc3pbamj26wa34puztowsnauoh@i3zms7ut4yuw
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXXUhsACgkQaA3BHVML
eiNVFQf+IoOXCACGkWEVmVaen50pjEfLq0OjSGHdbTJqhc9wU7Q/kPC+jEpZLyqo
OUMdXlA55BeLX52O+bvLordDPNETUsYH1QX2BYKDwcNIrvj8ISXcvdbnDcbVmttD
ZUaaBgZ0g2M6sZQvTVU88/1RtaG64+zuk9VA1dPlh6WnBtXBUeXNtD6YQjH6xY+a
MjZpB5VafwJTmQxy7qJ4yTLX291Ao8J2YZK8cCSyEr3FQKkAx9sJyp3hPurVIjLM
f1y1rtoHhxUV/OVg4M559fp6F6tUkFauv4qu5VUvmPPihJTaU0eSQxir0za4VJ4e
Jr2GOkju0oRRpKfjd0aKvaoWhl+MNg==
=aaTQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222135841.GA6677@localhost.localdomain
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
accel_sysfs_device_minor variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Today we read PCI VENDOR-ID in order to make sure PCI link is
healthy. Apparently the VENDOR-ID might be stored on host and
hence, when we read it we might not access the PCI bus.
In order to make sure PCI health check is reliable, we will start
checking the DEVICE-ID instead.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The reserved memory for FW is currently saved in an ASIC property in
units of MB, just like the value that comes from FW.
Except the fact that it is not clear from the property's name, it means
also that a calculation to actual size is required everywhere that it is
used.
Modify the property to hold the size in bytes.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the reserved memory request from FW is handled when running
with preboot only, but this request is relevant also when running with
full FW.
Modify to always handle this reservation request.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fetching sensor data can fail due to various reasons. In order
not to pollute the kernel log, those error prints must be
rate limited.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to a H/W issue, AXI drain event does not include a read/write
indication, hence we remove this print.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The unmasking is for event and it can be other event than RAZWI.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
debugfs files are created with permissions that don't align
with the access requirements.
Signed-off-by: Avri Kehat <akehat@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The glbl error cause handling has a wrong assumption that all error
bits are consecutive.
Fix the handling to check all relevant error bits per ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The FW interrupt info for a PCIe addr_dec event is set correctly, so
check for either global errors or razwi according to the indications
there.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Skip loading a linux FW image into the device with the current supported
ASICs is done for test purposes only.
Moreover, for future supported ASICs it is possible that there won't be
a need to load such an image.
The print in such a case is therefore not needed in most cases, so
replace the used dev_info() with dev_dbg().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The hop size related properties is a MMU properties and not
asic properties.
As for PMMU and HMMU we could have different sizes.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
