drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: a4a157777c ("drm/i915/dp: Compute DSC pipe config in atomic check")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't
obtained previously with intel_atomic_get_crtc_state, so we must check it
for NULLness here, just as in many other places, where we can't guarantee
that intel_atomic_get_crtc_state was called.
We are currently getting NULL ptr deref because of that, so this fix was
confirmed to help.
Fixes: 74a75dc908 ("drm/i915/display: move plane prepare/cleanup to intel_atomic_plane.c")
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505082212.27089-1-stanislav.lisovskiy@intel.com
Display to communicate display pipe count/CDCLK/voltage configuration
to Pcode for more accurate power accounting for DG2.
Existing sequence is only sending the voltage value to the Pcode.
Adding new sequence with current cdclk associate with voltage value masking.
Adding pcode request when any pipe power well will disable or enable.
v2: - Make intel_cdclk_need_serialize static to make CI compiler happy.
v3: - Removed redundant return(Jani Nikula)
- Changed intel_cdclk_power_usage_to_pcode_(pre|post)_notification to be
static and also naming to intel_cdclk_pcode_(pre|post)_notify(Jani Nikula)
- Changed u8 to be u16 for cdclk parameter in intel_pcode_notify function,
as according to BSpec it requires 10 bits(Jani Nikula)
- Replaced dev_priv's with i915's(Jani Nikula)
- Simplified expression in intel_cdclk_need_serialize(Jani Nikula)
- Removed redundant kernel-doc and indentation(Jani Nikula)
v4: - Fixed some checkpatch warnings
v5: - According to HW team comments that change should affect only DG2,
fix correspodent platform check to account this.
v6: - Added one more missing IS_DG2 check(Vinod Govindapillai)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504093959.12085-1-stanislav.lisovskiy@intel.com
Define and use the bitmasks for the x/y components
of the skl+ scaler window pos/size registers.
We stick to the full 16 bits mask here even though the
hardware limits are actually lower. The current (ADL)
hardware maximums are in fact: 14 bits for X size, 13 bits
for X pos, 13 bits for Y size/pos. Yes, that is correct,
X pos has less bits than the X size for some reason. But
that doesn't actually matter for now as we don't currently
even support such wide displays without the use of bigjoiner
(due to max plane width limit).
v2: Switch back to full 16bit masks since that's what
we use transcoder timign regs and PIPESRC as well
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426135019.7603-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Define and use the bitmasks for the x/y components
of the ilk+ panel filter window pos/size registers.
Note that we stick to the full 16 bit mask even though
the actual hardware limits are lower (and somewhat
platform dependent). BDW is actually limited to
13 bits horizontal and 12 bits vertical, with the high
bits being hardwired to zero. HSW should have the same
limits as BDW. And pre-HSW should be limited to 12bits
in both directions as that's already the limit of the
transcoder timing registers. Curiously on HSW and earlier
platforms all 16 bits can actually be set, but presumably
the hardware ignores the high bits.
v2: Switch back to full 16bit masks since that's what
we use transcoder timign regs and PIPESRC as well
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426135019.7603-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
For 128b/132b LT prior to LT DPTX should set power state, DP channel
coding and then link rate.
v2: added separate function to avoid code duplication(Jani N)
v3: DP2.1 section 3.5.2.16 is ordered, 3.5.1.2 is unordered and hence
discarding <Ville>
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425025944.151744-1-arun.r.murthy@intel.com
Unlike previous platforms that used PORT_TX_DFLEXDPSP
for max_lane calculation, MTL uses only PORT_TX_DFLEXPA1
from which the max_lanes has to be calculated.
Bspec: 50235, 65380
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-13-mika.kahola@intel.com
The HPD live status for MTL has to be read from different set of
registers. MTL deserves a new function for this purpose
and cannot reuse the existing HPD live status detection
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-12-mika.kahola@intel.com
Add register writes to enable powering up Type-C subsystem i.e. TCSS.
For MeteorLake we need to request TCSS to power up and check the TCSS
power state after 500 us.
In addition, for PICA we need to set/clear the Type-C PHY ownnership
bit when Type-C device is connected/disconnected.
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-11-mika.kahola@intel.com
Xe_LPD+ defines interrupt bits for only DDI ports in the DE Port
Interrupt registers. The bits for Type-C ports are defined in the PICA
interrupt registers.
BSpec: 50064
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-10-mika.kahola@intel.com
Use MPLLA for DP2.0 rates 10G and 20G, when ssc is enabled.
v2: Fix typo in commit message (Animesh)
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-7-mika.kahola@intel.com
As we already do with C10 chip, let's dump the pll
hw state for C20 as well.
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-4-mika.kahola@intel.com
Create a table for C20 DP1.4, DP2.0 and HDMI2.1 rates.
The PLL settings are based on table, not for algorithmic alternative.
For DP 1.4 only MPLLB is in use.
Once register settings are done, we read back C20 HW state.
BSpec: 64568
v2: Updated pll tables (RK)
MPLLB selection fix (RK)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-3-mika.kahola@intel.com
C20 phy PLL programming sequence for DP, DP2.0, HDMI2.x non-FRL and
HDMI2.x FRL. This enables C20 MPLLA and MPLLB programming sequence. add
4 lane support for c20.
v2: Add 6.48Gbps and 6.75Gbps modes for eDP (RK)
Fix lane check (RK)
Fix multiline commenting (Arun)
use usleep_range() instead of msleep() (Andi)
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-2-mika.kahola@intel.com
The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have
a version of 3 or newer and the panel is in vid-mode.
This is based on the big comment around line 730 which starts with
"Panel enable/disable sequences from the VBT spec.", where
the "v3 video mode seq" column does not have any wait t# entries.
Checking the Windows driver shows that it does always honor
the VBT delays independent of the version of the VBT sequences.
Commit 6fdb335f1c ("drm/i915/dsi: Use unconditional msleep for
the panel_on_delay when there is no reset-deassert MIPI-sequence")
switched to a direct msleep() instead of intel_dsi_msleep()
when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix
the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.
And now testing on a Nextbook Ares 8A shows that panel_on_delay
must always be honored otherwise the panel will not turn on.
Instead of only always using regular msleep() for panel_on_delay
do as Windows does and always use regular msleep() everywhere
were intel_dsi_msleep() is used and drop the intel_dsi_msleep()
helper.
Changes in v2:
- Replace all intel_dsi_msleep() calls instead of just
the intel_dsi_msleep(panel_on_delay) call
Cc: stable@vger.kernel.org
Fixes: 6fdb335f1c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425194441.68086-1-hdegoede@redhat.com
Type-C PHYs are taking longer than expected for Aux IO Power Enabling.
Workaround: Increase the timeout.
---v2
-change style on how we mention WA [Ankit]
-fix bat error by creating new func that is only called for aux power
well scenarios so we can avoid null pointer error as it is called
everywhere.
--v3
-Add non-default enable_timeout to power well descriptor which avoids
adding more platform checks [Imre]
--v4
-Remove Bspec link from top to bottom remove WA link from commit put it
on comment [Jani]
-enable_timeout in ms and add .fixed_enable_delay too [Imre]
--v5
-move power_wells instead of duplicating them [Imre]
Bspec: 55480
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418131425.1285088-1-suraj.kandpal@intel.com
CPU transcoder mask is used to iterate over the available
CPU transcoders in the macro for_each_cpu_transcoder().
The macro is broken on MTL and got highlighted when audio
state was being tracked for each transcoder added in [1].
Add the missing CPU transcoder mask which is similar to ADL-P
mask but without DSI transcoders.
[1]: https://patchwork.freedesktop.org/patch/523723/
Fixes: 7835303982 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Acked-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420221248.2511314-1-radhakrishna.sripada@intel.com
On ADLP+ Bspec allows DC5/6 to be enabled while power well 2 is enabled.
Since the AUX and DDI power wells (except for port A/B) are also backed
by power well 2, this would suggest that DC5/6 can be enabled while any
of these AUX or DDI port functionalities are used. As opposed to this
AUX transfers will time out on ADLP TypeC ports while DC6 is enabled.
Until the restriction for DC5/6 is clarified in Bspec let's assume that
the intention is to allow for using these power states while pipe A/B is
enabled, but only for combo ports which can be used with eDP outputs.
Similarly assume that AUX transaction initiated by the driver on any port
requires DC states to be disabled.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Fixes: 88c4879384 ("drm/i915: Use separate "DC off" power well for ADL-P and DG2")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424200205.1732941-1-imre.deak@intel.com
Communicating QGV points restriction to PUnit happens via PM Demand
instead of the Pcode mailbox in the previous platforms. GV point
restriction is handled by the PM demand code.
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318005852.2303937-5-radhakrishna.sripada@intel.com
drm/i915: Initialize dkl_phy spin lock from display code path
Start moving the initialization of display locks from
i915_driver_early_probe().
Display locks should be initialized from display-only code paths.
It was also agreed that if a variable is only used in one file, it
should be initialized only in that file, so intel_dkl_phy_init() was
added.
v2:
- added intel_display_locks_init()
v3:
- rebased
v4:
- dropped intel_display_locks_init()
v5:
- moved intel_dkl_phy_init() to the beginning of file
Cc: intel-gfx@lists.freedesktop.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420170558.35398-1-jose.souza@intel.com
On MTL, LLC is not shared between GT and CPU, set has_llc=0.
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420102349.15302-1-nirmoy.das@intel.com
Reduce the 'intel_dp' stuff a bit by introducing local
cpu_transcoder variables.
Ideally I'd like the whole PSR code to stop using intel_dp
except during a full modeset, but dunno yet if that's
possible. But the less 'intel_dp' we have sprad around
the easier that should be to figure out eventually.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230411191429.29895-9-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
The fact that DC states reset the PSR perofrmance counter
is no reason not to include it in the debug output.
But let's keep the comment there to remind people about
that caveat.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230411191429.29895-8-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
We need to disable PSR when we are doing AUX by hand, otherwise
it's possible that the PSR hardware could be using the AUX CH
while we try to do our manual stuff. Add a FIXME for now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230411191429.29895-7-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Define more of the PSR mask bits, and describe in detail
what some of them do. Even if we don't set them all from
the driver they can be very useful during PSR debugging.
Having to trawl through bspec every time to find them is
not fun, and re-reverse engineering the behaviour every
time is time consuming (even if a bit more fun than spec
trawling).
v2: Moar bits
Put the description into a comment to be easily available
v2: Fix the BDW_UNMASK_VBL_TO_REGS_IN_SRD/HSW_UNMASK_VBL_TO_REGS_IN_SRD
description
Rebase due to intel_psr_regs.h
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230411191429.29895-6-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
As with ADL-P, MTL's "DC off" power well should be a dependency of the
PGC and PGD power wells, not the entire PG2 well. In fact, the DC5/DC6
requirements between the two platforms are the same, so the Xe_LPD "DC
off" well definition can just be re-used for Xe_LPD+.
Bspec: 49193
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418220446.2205509-3-radhakrishna.sripada@intel.com
