mirror of
https://github.com/torvalds/linux.git
synced 2026-08-01 20:22:08 +02:00
51f271c194
1336157 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Kemeng Shi
|
51f271c194 |
mm: swap: add back full cluster when no entry is reclaimed
If no swap cache is reclaimed, cluster taken off from full_clusters list
will not be put in any list and we can't reclaime HAS_CACHE slots
efficiently. Do relocate_cluster for such cluster to avoid inefficiency.
Link: https://lkml.kernel.org/r/20250224113910.522439-1-shikemeng@huaweicloud.com
Fixes:
|
||
|
Lorenzo Stoakes
|
47b16d0462 |
mm: abort vma_modify() on merge out of memory failure
The remainder of vma_modify() relies upon the vmg state remaining pristine
after a merge attempt.
Usually this is the case, however in the one edge case scenario of a merge
attempt failing not due to the specified range being unmergeable, but
rather due to an out of memory error arising when attempting to commit the
merge, this assumption becomes untrue.
This results in vmg->start, end being modified, and thus the proceeding
attempts to split the VMA will be done with invalid start/end values.
Thankfully, it is likely practically impossible for us to hit this in
reality, as it would require a maple tree node pre-allocation failure that
would likely never happen due to it being 'too small to fail', i.e. the
kernel would simply keep retrying reclaim until it succeeded.
However, this scenario remains theoretically possible, and what we are
doing here is wrong so we must correct it.
The safest option is, when this scenario occurs, to simply give up the
operation. If we cannot allocate memory to merge, then we cannot allocate
memory to split either (perhaps moreso!).
Any scenario where this would be happening would be under very extreme
(likely fatal) memory pressure, so it's best we give up early.
So there is no doubt it is appropriate to simply bail out in this
scenario.
However, in general we must if at all possible never assume VMG state is
stable after a merge attempt, since merge operations update VMG fields.
As a result, additionally also make this clear by storing start, end in
local variables.
The issue was reported originally by syzkaller, and by Brad Spengler (via
an off-list discussion), and in both instances it manifested as a
triggering of the assert:
VM_WARN_ON_VMG(start >= end, vmg);
In vma_merge_existing_range().
It seems at least one scenario in which this is occurring is one in which
the merge being attempted is due to an madvise() across multiple VMAs
which looks like this:
start end
|<------>|
|----------|------|
| vma | next |
|----------|------|
When madvise_walk_vmas() is invoked, we first find vma in the above
(determining prev to be equal to vma as we are offset into vma), and then
enter the loop.
We determine the end of vma that forms part of the range we are
madvise()'ing by setting 'tmp' to this value:
/* Here vma->vm_start <= start < (end|vma->vm_end) */
tmp = vma->vm_end;
We then invoke the madvise() operation via visit(), letting prev get
updated to point to vma as part of the operation:
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
error = visit(vma, &prev, start, tmp, arg);
Where the visit() function pointer in this instance is
madvise_vma_behavior().
As observed in syzkaller reports, it is ultimately madvise_update_vma()
that is invoked, calling vma_modify_flags_name() and vma_modify() in turn.
Then, in vma_modify(), we attempt the merge:
merged = vma_merge_existing_range(vmg);
if (merged)
return merged;
We invoke this with vmg->start, end set to start, tmp as such:
start tmp
|<--->|
|----------|------|
| vma | next |
|----------|------|
We find ourselves in the merge right scenario, but the one in which we
cannot remove the middle (we are offset into vma).
Here we have a special case where vmg->start, end get set to perhaps
unintuitive values - we intended to shrink the middle VMA and expand the
next.
This means vmg->start, end are set to... vma->vm_start, start.
Now the commit_merge() fails, and vmg->start, end are left like this.
This means we return to the rest of vma_modify() with vmg->start, end
(here denoted as start', end') set as:
start' end'
|<-->|
|----------|------|
| vma | next |
|----------|------|
So we now erroneously try to split accordingly. This is where the
unfortunate stuff begins.
We start with:
/* Split any preceding portion of the VMA. */
if (vma->vm_start < vmg->start) {
...
}
This doesn't trigger as we are no longer offset into vma at the start.
But then we invoke:
/* Split any trailing portion of the VMA. */
if (vma->vm_end > vmg->end) {
...
}
Which does get invoked. This leaves us with:
start' end'
|<-->|
|----|-----|------|
| vma| new | next |
|----|-----|------|
We then return ultimately to madvise_walk_vmas(). Here 'new' is unknown,
and putting back the values known in this function we are faced with:
start tmp end
| | |
|----|-----|------|
| vma| new | next |
|----|-----|------|
prev
Then:
start = tmp;
So:
start end
| |
|----|-----|------|
| vma| new | next |
|----|-----|------|
prev
The following code does not cause anything to happen:
if (prev && start < prev->vm_end)
start = prev->vm_end;
if (start >= end)
break;
And then we invoke:
if (prev)
vma = find_vma(mm, prev->vm_end);
Which is where a problem occurs - we don't know about 'new' so we
essentially look for the vma after prev, which is new, whereas we actually
intended to discover next!
So we end up with:
start end
| |
|----|-----|------|
|prev| vma | next |
|----|-----|------|
And we have successfully bypassed all of the checks madvise_walk_vmas()
has to ensure early exit should we end up moving out of range.
We loop around, and hit:
/* Here vma->vm_start <= start < (end|vma->vm_end) */
tmp = vma->vm_end;
Oh dear. Now we have:
tmp
start end
| |
|----|-----|------|
|prev| vma | next |
|----|-----|------|
We then invoke:
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
error = visit(vma, &prev, start, tmp, arg);
Where start == tmp. That is, a zero range. This is not good.
We invoke visit() which is madvise_vma_behavior() which does not check the
range (for good reason, it assumes all checks have been done before it was
called), which in turn finally calls madvise_update_vma().
The madvise_update_vma() function calls vma_modify_flags_name() in turn,
which ultimately invokes vma_modify() with... start == end.
vma_modify() calls vma_merge_existing_range() and finally we hit:
VM_WARN_ON_VMG(start >= end, vmg);
Which triggers, as start == end.
While it might be useful to add some CONFIG_DEBUG_VM asserts in these
instances to catch this kind of error, since we have just eliminated any
possibility of that happening, we will add such asserts separately as to
reduce churn and aid backporting.
Link: https://lkml.kernel.org/r/20250222161952.41957-1-lorenzo.stoakes@oracle.com
Fixes:
|
||
|
Ge Yang
|
67bab13307 |
mm/hugetlb: wait for hugetlb folios to be freed
Since the introduction of commit |
||
|
gao xu
|
c3e998398d |
mm: fix possible NULL pointer dereference in __swap_duplicate
Add a NULL check on the return value of swp_swap_info in __swap_duplicate to prevent crashes caused by NULL pointer dereference. The reason why swp_swap_info() returns NULL is unclear; it may be due to CPU cache issues or DDR bit flips. The probability of this issue is very small - it has been observed to occur approximately 1 in 500,000 times per week. The stack info we encountered is as follows: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [RB/E]rb_sreason_str_set: sreason_str set null_pointer Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=00000008a80e5000 [0000000000000058] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Skip md ftrace buffer dump for: 0x1609e0 ... pc : swap_duplicate+0x44/0x164 lr : copy_page_range+0x508/0x1e78 sp : ffffffc0f2a699e0 x29: ffffffc0f2a699e0 x28: ffffff8a5b28d388 x27: ffffff8b06603388 x26: ffffffdf7291fe70 x25: 0000000000000006 x24: 0000000000100073 x23: 00000000002d2d2f x22: 0000000000000008 x21: 0000000000000000 x20: 00000000002d2d2f x19: 18000000002d2d2f x18: ffffffdf726faec0 x17: 0000000000000000 x16: 0010000000000001 x15: 0040000000000001 x14: 0400000000000001 x13: ff7ffffffffffb7f x12: ffeffffffffffbff x11: ffffff8a5c7e1898 x10: 0000000000000018 x9 : 0000000000000006 x8 : 1800000000000000 x7 : 0000000000000000 x6 : ffffff8057c01f10 x5 : 000000000000a318 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000006daf200000 x1 : 0000000000000001 x0 : 18000000002d2d2f Call trace: swap_duplicate+0x44/0x164 copy_page_range+0x508/0x1e78 copy_process+0x1278/0x21cc kernel_clone+0x90/0x438 __arm64_sys_clone+0x5c/0x8c invoke_syscall+0x58/0x110 do_el0_svc+0x8c/0xe0 el0_svc+0x38/0x9c el0t_64_sync_handler+0x44/0xec el0t_64_sync+0x1a8/0x1ac Code: 9139c35a 71006f3f 54000568 f8797b55 (f9402ea8) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs The patch seems to only provide a workaround, but there are no more effective software solutions to handle the bit flips problem. This path will change the issue from a system crash to a process exception, thereby reducing the impact on the entire machine. akpm: this is probably a kernel bug, but this patch keeps the system running and doesn't reduce that bug's debuggability. Link: https://lkml.kernel.org/r/e223b0e6ba2f4924984b1917cc717bd5@honor.com Signed-off-by: gao xu <gaoxu2@honor.com> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosry.ahmed@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sebastian Andrzej Siewior
|
19fac3c939 |
dma: kmsan: export kmsan_handle_dma() for modules
kmsan_handle_dma() is used by virtio_ring() which can be built as a
module. kmsan_handle_dma() needs to be exported otherwise building the
virtio_ring fails.
Export kmsan_handle_dma for modules.
Link: https://lkml.kernel.org/r/20250218091411.MMS3wBN9@linutronix.de
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502150634.qjxwSeJR-lkp@intel.com/
Fixes:
|
||
|
Ujwal Kundur
|
04ec365e3f |
Documentation: fix doc link to fault-injection.rst
Fix incorrect reference to fault-injection docs Link: https://lkml.kernel.org/r/20250215105106.734-1-ujwal.kundur@gmail.com Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ma Wupeng
|
af288a426c |
hwpoison, memory_hotplug: lock folio before unmap hwpoisoned folio
Commit |
||
|
Ma Wupeng
|
773b9a6aa6 |
mm: memory-hotplug: check folio ref count first in do_migrate_range
If a folio has an increased reference count, folio_try_get() will acquire it, perform necessary operations, and then release it. In the case of a poisoned folio without an elevated reference count (which is unlikely for memory-failure), folio_try_get() will simply bypass it. Therefore, relocate the folio_try_get() function, responsible for checking and acquiring this reference count at first. Link: https://lkml.kernel.org/r/20250217014329.3610326-3-mawupeng1@huawei.com Signed-off-by: Ma Wupeng <mawupeng1@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ma Wupeng
|
b81679b163 |
mm: memory-failure: update ttu flag inside unmap_poisoned_folio
Patch series "mm: memory_failure: unmap poisoned folio during migrate properly", v3. Fix two bugs during folio migration if the folio is poisoned. This patch (of 3): Commit |
||
|
Qi Zheng
|
a564ccfe30 |
arm: pgtable: fix NULL pointer dereference issue
When update_mmu_cache_range() is called by update_mmu_cache(), the vmf
parameter is NULL, which will cause a NULL pointer dereference issue in
adjust_pte():
Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read
Hardware name: Atmel AT91SAM9
PC is at update_mmu_cache_range+0x1e0/0x278
LR is at pte_offset_map_rw_nolock+0x18/0x2c
Call trace:
update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec
remove_migration_pte from rmap_walk_file+0xcc/0x130
rmap_walk_file from remove_migration_ptes+0x90/0xa4
remove_migration_ptes from migrate_pages_batch+0x6d4/0x858
migrate_pages_batch from migrate_pages+0x188/0x488
migrate_pages from compact_zone+0x56c/0x954
compact_zone from compact_node+0x90/0xf0
compact_node from kcompactd+0x1d4/0x204
kcompactd from kthread+0x120/0x12c
kthread from ret_from_fork+0x14/0x38
Exception stack(0xc0d8bfb0 to 0xc0d8bff8)
To fix it, do not rely on whether 'ptl' is equal to decide whether to hold
the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is
enabled. In addition, if two vmas map to the same PTE page, there is no
need to hold the pte lock again, otherwise a deadlock will occur. Just
add the need_lock parameter to let adjust_pte() know this information.
Link: https://lkml.kernel.org/r/20250217024924.57996-1-zhengqi.arch@bytedance.com
Fixes:
|
||
|
Haoxiang Li
|
7277dd0a0b |
m68k: sun3: add check for __pgd_alloc()
Add check for the return value of __pgd_alloc() in pgd_alloc() to prevent
null pointer dereference.
Link: https://lkml.kernel.org/r/20250217160017.2375536-1-haoxiang_li2024@163.com
Fixes:
|
||
|
SeongJae Park
|
349db086a6 |
selftests/damon/damos_quota_goal: handle minimum quota that cannot be further reduced
damos_quota_goal.py selftest see if DAMOS quota goals tuning feature
increases or reduces the effective size quota for given score as expected.
The tuning feature sets the minimum quota size as one byte, so if the
effective size quota is already one, we cannot expect it further be
reduced. However the test is not aware of the edge case, and fails since
it shown no expected change of the effective quota. Handle the case by
updating the failure logic for no change to see if it was the case, and
simply skips to next test input.
Link: https://lkml.kernel.org/r/20250217182304.45215-1-sj@kernel.org
Fixes:
|
||
|
John Hubbard
|
0a7565ee6e |
Revert "selftests/mm: remove local __NR_* definitions"
This reverts commit |
||
|
Kemeng Shi
|
8344017aaf |
test_xarray: fix failure in check_pause when CONFIG_XARRAY_MULTI is not defined
In case CONFIG_XARRAY_MULTI is not defined, xa_store_order can store a
multi-index entry but xas_for_each can't tell sbiling entry from valid
entry. So the check_pause failed when we store a multi-index entry and
wish xas_for_each can handle it normally. Avoid to store multi-index
entry when CONFIG_XARRAY_MULTI is disabled to fix the failure.
Link: https://lkml.kernel.org/r/20250213163659.414309-1-shikemeng@huaweicloud.com
Fixes:
|
||
|
Waiman Long
|
ac7af1f57a |
kasan: don't call find_vm_area() in a PREEMPT_RT kernel
The following bug report was found when running a PREEMPT_RT debug kernel. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 140605, name: kunit_try_catch preempt_count: 1, expected: 0 Call trace: rt_spin_lock+0x70/0x140 find_vmap_area+0x84/0x168 find_vm_area+0x1c/0x50 print_address_description.constprop.0+0x2a0/0x320 print_report+0x108/0x1f8 kasan_report+0x90/0xc8 Since commit |
||
|
Nick Desaulniers
|
4998a6fa2a |
MAINTAINERS: update Nick's contact info
Updated .mailmap, but forgot these other places. Link: https://lkml.kernel.org/r/20250212173523.3979840-1-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mark Brown
|
5dcf52e2ce |
selftests/mm: fix check for running THP tests
When testing if we should try to compact memory or drop caches before we
run the THP or HugeTLB tests we use | as an or operator. This doesn't
work since run_vmtests.sh is written in shell where this is used to pipe
the output of the first argument into the second. Instead use the shell's
-o operator.
Link: https://lkml.kernel.org/r/20250212-kselftest-mm-no-hugepages-v1-1-44702f538522@kernel.org
Fixes:
|
||
|
Luiz Capitulino
|
6d7bc938ad |
mm: hugetlb: avoid fallback for specific node allocation of 1G pages
When using the HugeTLB kernel command-line to allocate 1G pages from a
specific node, such as:
default_hugepagesz=1G hugepages=1:1
If node 1 happens to not have enough memory for the requested number of 1G
pages, the allocation falls back to other nodes. A quick way to reproduce
this is by creating a KVM guest with a memory-less node and trying to
allocate 1 1G page from it. Instead of failing, the allocation will
fallback to other nodes.
This defeats the purpose of node specific allocation. Also, specific node
allocation for 2M pages don't have this behavior: the allocation will just
fail for the pages it can't satisfy.
This issue happens because HugeTLB calls memblock_alloc_try_nid_raw() for
1G boot-time allocation as this function falls back to other nodes if the
allocation can't be satisfied. Use memblock_alloc_exact_nid_raw()
instead, which ensures that the allocation will only be satisfied from the
specified node.
Link: https://lkml.kernel.org/r/20250211034856.629371-1-luizcap@redhat.com
Fixes:
|
||
|
Chen Ridong
|
99333229de |
memcg: avoid dead loop when setting memory.max
A softlockup issue was found with stress test:
watchdog: BUG: soft lockup - CPU#27 stuck for 26s! [migration/27:181]
CPU: 27 UID: 0 PID: 181 Comm: migration/27 6.14.0-rc2-next-20250210 #1
Stopper: multi_cpu_stop <- stop_machine_from_inactive_cpu
RIP: 0010:stop_machine_yield+0x2/0x10
RSP: 0000:ff4a0dcecd19be48 EFLAGS: 00000246
RAX: ffffffff89c0108f RBX: ff4a0dcec03afe44 RCX: 0000000000000000
RDX: ff1cdaaf6eba5808 RSI: 0000000000000282 RDI: ff1cda80c1775a40
RBP: 0000000000000001 R08: 00000011620096c6 R09: 7fffffffffffffff
R10: 0000000000000001 R11: 0000000000000100 R12: ff1cda80c1775a40
R13: 0000000000000000 R14: 0000000000000001 R15: ff4a0dcec03afe20
FS: 0000000000000000(0000) GS:ff1cdaaf6eb80000(0000)
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000025e2c2a001 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
multi_cpu_stop+0x8f/0x100
cpu_stopper_thread+0x90/0x140
smpboot_thread_fn+0xad/0x150
kthread+0xc2/0x100
ret_from_fork+0x2d/0x50
The stress test involves CPU hotplug operations and memory control group
(memcg) operations. The scenario can be described as follows:
echo xx > memory.max cache_ap_online oom_reaper
(CPU23) (CPU50)
xx < usage stop_machine_from_inactive_cpu
for(;;) // all active cpus
trigger OOM queue_stop_cpus_work
// waiting oom_reaper
multi_cpu_stop(migration/xx)
// sync all active cpus ack
// waiting cpu23 ack
// CPU50 loops in multi_cpu_stop
waiting cpu50
Detailed explanation:
1. When the usage is larger than xx, an OOM may be triggered. If the
process does not handle with ths kill signal immediately, it will loop
in the memory_max_write.
2. When cache_ap_online is triggered, the multi_cpu_stop is queued to the
active cpus. Within the multi_cpu_stop function, it attempts to
synchronize the CPU states. However, the CPU23 didn't acknowledge
because it is stuck in a loop within the for(;;).
3. The oom_reaper process is blocked because CPU50 is in a loop, waiting
for CPU23 to acknowledge the synchronization request.
4. Finally, it formed cyclic dependency and lead to softlockup and dead
loop.
To fix this issue, add cond_resched() in the memory_max_write, so that it
will not block migration task.
Link: https://lkml.kernel.org/r/20250211081819.33307-1-chenridong@huaweicloud.com
Fixes:
|
||
|
Nick Desaulniers
|
8648ee2622 |
mailmap: update Nick's entry
Link: https://lkml.kernel.org/r/20250211212117.3195265-1-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Qi Zheng
|
f39edcf634 |
mm: pgtable: fix incorrect reclaim of non-empty PTE pages
In zap_pte_range(), if the pte lock was released midway, the pte entries
may be refilled with physical pages by another thread, which may cause a
non-empty PTE page to be reclaimed and eventually cause the system to
crash.
To fix it, fall back to the slow path in this case to recheck if all pte
entries are still none.
Link: https://lkml.kernel.org/r/20250211072625.89188-1-zhengqi.arch@bytedance.com
Fixes:
|
||
|
Wang Yaxin
|
b016d08737 |
taskstats: modify taskstats version
After adding "delay max" and "delay min" to the taskstats structure, the
taskstats version needs to be updated.
Link: https://lkml.kernel.org/r/20250208144901218Q5ptVpqsQkb2MOEmW4Ujn@zte.com.cn
Fixes:
|
||
|
Wang Yaxin
|
2272dbc471 |
getdelays: fix error format characters
getdelays had a compilation issue because the format string was not
updated when the "delay min" was added. For example, after adding the
"delay min" in printf, there were 7 strings but only 6 "%s" format
specifiers. Similarly, after adding the 't->cpu_delay_total', there were
7 variables but only 6 format characters specifiers, causing compilation
issues as follows. This commit fixes these issues to ensure that
getdelays compiles correctly.
root@xx:~/linux-next/tools/accounting$ make
getdelays.c:199:9: warning: format `%llu' expects argument of type
`long long unsigned int', but argument 8 has type `char *' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
216 | "delay total", "delay average", "delay max", "delay min",
| ~~~~~~~~~~~
| |
| char *
getdelays.c:200:21: note: format string is defined here
200 | " %15llu%15llu%15llu%15llu%15.3fms%13.6fms\n"
| ~~~~~^
| |
| long long unsigned int
| %15s
getdelays.c:199:9: warning: format `%f' expects argument of type
`double', but argument 12 has type `long long unsigned int' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
220 | (unsigned long long)t->cpu_delay_total,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long long unsigned int
.....
Link: https://lkml.kernel.org/r/20250208144400544RduNRhwIpT3m2JyRBqskZ@zte.com.cn
Fixes:
|
||
|
David Hildenbrand
|
41cddf83d8 |
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
If migration succeeded, we called
folio_migrate_flags()->mem_cgroup_migrate() to migrate the memcg from the
old to the new folio. This will set memcg_data of the old folio to 0.
Similarly, if migration failed, memcg_data of the dst folio is left unset.
If we call folio_putback_lru() on such folios (memcg_data == 0), we will
add the folio to be freed to the LRU, making memcg code unhappy. Running
the hmm selftests:
# ./hmm-tests
...
# RUN hmm.hmm_device_private.migrate ...
[ 102.078007][T14893] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7ff27d200 pfn:0x13cc00
[ 102.079974][T14893] anon flags: 0x17ff00000020018(uptodate|dirty|swapbacked|node=0|zone=2|lastcpupid=0x7ff)
[ 102.082037][T14893] raw: 017ff00000020018 dead000000000100 dead000000000122 ffff8881353896c9
[ 102.083687][T14893] raw: 00000007ff27d200 0000000000000000 00000001ffffffff 0000000000000000
[ 102.085331][T14893] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled())
[ 102.087230][T14893] ------------[ cut here ]------------
[ 102.088279][T14893] WARNING: CPU: 0 PID: 14893 at ./include/linux/memcontrol.h:726 folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.090478][T14893] Modules linked in:
[ 102.091244][T14893] CPU: 0 UID: 0 PID: 14893 Comm: hmm-tests Not tainted 6.13.0-09623-g6c216bc522fd #151
[ 102.093089][T14893] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
[ 102.094848][T14893] RIP: 0010:folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.096104][T14893] Code: ...
[ 102.099908][T14893] RSP: 0018:ffffc900236c37b0 EFLAGS: 00010293
[ 102.101152][T14893] RAX: 0000000000000000 RBX: ffffea0004f30000 RCX: ffffffff8183f426
[ 102.102684][T14893] RDX: ffff8881063cb880 RSI: ffffffff81b8117f RDI: ffff8881063cb880
[ 102.104227][T14893] RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
[ 102.105757][T14893] R10: 0000000000000001 R11: 0000000000000002 R12: ffffc900236c37d8
[ 102.107296][T14893] R13: ffff888277a2bcb0 R14: 000000000000001f R15: 0000000000000000
[ 102.108830][T14893] FS: 00007ff27dbdd740(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
[ 102.110643][T14893] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.111924][T14893] CR2: 00007ff27d400000 CR3: 000000010866e000 CR4: 0000000000750ef0
[ 102.113478][T14893] PKRU: 55555554
[ 102.114172][T14893] Call Trace:
[ 102.114805][T14893] <TASK>
[ 102.115397][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.116547][T14893] ? __warn.cold+0x110/0x210
[ 102.117461][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.118667][T14893] ? report_bug+0x1b9/0x320
[ 102.119571][T14893] ? handle_bug+0x54/0x90
[ 102.120494][T14893] ? exc_invalid_op+0x17/0x50
[ 102.121433][T14893] ? asm_exc_invalid_op+0x1a/0x20
[ 102.122435][T14893] ? __wake_up_klogd.part.0+0x76/0xd0
[ 102.123506][T14893] ? dump_page+0x4f/0x60
[ 102.124352][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.125500][T14893] folio_batch_move_lru+0xd4/0x200
[ 102.126577][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.127505][T14893] __folio_batch_add_and_move+0x391/0x720
[ 102.128633][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.129550][T14893] folio_putback_lru+0x16/0x80
[ 102.130564][T14893] migrate_device_finalize+0x9b/0x530
[ 102.131640][T14893] dmirror_migrate_to_device.constprop.0+0x7c5/0xad0
[ 102.133047][T14893] dmirror_fops_unlocked_ioctl+0x89b/0xc80
Likely, nothing else goes wrong: putting the last folio reference will
remove the folio from the LRU again. So besides memcg complaining, adding
the folio to be freed to the LRU is just an unnecessary step.
The new flow resembles what we have in migrate_folio_move(): add the dst
to the lru, remove migration ptes, unlock and unref dst.
Link: https://lkml.kernel.org/r/20250210161317.717936-1-david@redhat.com
Fixes:
|
||
|
Florian Fainelli
|
035d3c7787 |
tools/mm: fix build warnings with musl-libc
musl-libc warns about the following:
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/errno.h:1:2: attention: #warning redirecting incorrect #include <sys/errno.h> to <errno.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/errno.h> to <errno.h>
| ^~~~~~~
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/fcntl.h:1:2: attention: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
include errno.h and fcntl.h directly.
Link: https://lkml.kernel.org/r/20250210200518.1137295-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Feng Tang
|
3219585e89 |
mailmap: add entry for Feng Tang
Map my old business email to personal email. Link: https://lkml.kernel.org/r/20250205060457.53667-1-feng.tang@linux.alibaba.com Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jeff Johnson
|
639375b0aa |
.mailmap: add entries for Jeff Johnson
Map past iterations of my e-mail addresses to the current one. Link: https://lkml.kernel.org/r/20250205-jjohnson-mailmap-v1-1-269cb7b1710d@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ricardo Cañuelo Navarro
|
2ede647a6f |
mm,madvise,hugetlb: check for 0-length range after end address adjustment
Add a sanity check to madvise_dontneed_free() to address a corner case in
madvise where a race condition causes the current vma being processed to
be backed by a different page size.
During a madvise(MADV_DONTNEED) call on a memory region registered with a
userfaultfd, there's a period of time where the process mm lock is
temporarily released in order to send a UFFD_EVENT_REMOVE and let
userspace handle the event. During this time, the vma covering the
current address range may change due to an explicit mmap done concurrently
by another thread.
If, after that change, the memory region, which was originally backed by
4KB pages, is now backed by hugepages, the end address is rounded down to
a hugepage boundary to avoid data loss (see "Fixes" below). This rounding
may cause the end address to be truncated to the same address as the
start.
Make this corner case follow the same semantics as in other similar cases
where the requested region has zero length (ie. return 0).
This will make madvise_walk_vmas() continue to the next vma in the range
(this time holding the process mm lock) which, due to the prev pointer
becoming stale because of the vma change, will be the same hugepage-backed
vma that was just checked before. The next time madvise_dontneed_free()
runs for this vma, if the start address isn't aligned to a hugepage
boundary, it'll return -EINVAL, which is also in line with the madvise
api.
From userspace perspective, madvise() will return EINVAL because the start
address isn't aligned according to the new vma alignment requirements
(hugepage), even though it was correctly page-aligned when the call was
issued.
Link: https://lkml.kernel.org/r/20250203075206.1452208-1-rcn@igalia.com
Fixes:
|
||
|
Hyeonggon Yoo
|
63895d20d6 |
mm/zswap: fix inconsistency when zswap_store_page() fails
Commit |
||
|
Pavel Begunkov
|
f4b78260fc |
lib/iov_iter: fix import_iovec_ubuf iovec management
import_iovec() says that it should always be fine to kfree the iovec
returned in @iovp regardless of the error code. __import_iovec_ubuf()
never reallocates it and thus should clear the pointer even in cases when
copy_iovec_*() fail.
Link: https://lkml.kernel.org/r/378ae26923ffc20fd5e41b4360d673bf47b1775b.1738332461.git.asml.silence@gmail.com
Fixes:
|
||
|
Bart Van Assche
|
c8a3e63ff9 |
procfs: fix a locking bug in a vmcore_add_device_dump() error path
Unlock vmcore_mutex when returning -EBUSY.
Link: https://lkml.kernel.org/r/20250129222003.1495713-1-bvanassche@acm.org
Fixes:
|
||
|
Linus Torvalds
|
0ad2507d5d | Linux 6.14-rc3 | ||
|
Linus Torvalds
|
224e745110 |
Kbuild fixes for v6.14 (2nd)
- Fix annoying logs when building tools in parallel - Fix the Debian linux-headers package build again - Fix the target triple detection for userspace programs on Clang -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmeyExkVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGtEIQAJNiuG2KvXawT8BdDE1RMM25bJiE 3mkqexYAWionInz44WzAwMuzXG3yLFxeuLynh926qw8eE832s2ngMzJluFQehl53 QP/KVpzFliPyO+nRWPcsRi2Re8wL3TD3lnJLt58yNJlpBmF7pc9TYFUrMuRqFE/1 1h2BlCOYYuq24mMY4F7ULESQ/4Bpb+4dGkN/WXtPttYFmNl+sPy9vn3lG3DxzLKM UjwAmRhta/sFV3UF6nWcb1jsiti7IkHf/WIZPm8MoMjBNetnSkfcesPeLhaI7waf +TVa9JqwoFWgscGXlCpK/Pw/gOQr1Lf0ZuSMNxtJe9vU76rEoLmdUYaHNbnA6CvQ wj6HA7E4mownOzKu3gqZ76dqoaHYdmeHTSoyDCJqVFzicI7ZDYT8MaggFGH/F10J KZ7daYOV6HYJxGVTYuhD1e2RvOZcXUHzxafTyl0Hyi1z3z+pWOKLE6W/uDvRkW32 qCubjZwgepHuI/TUos9VIkkIiW2429Sb4kgqQTRBtzRdKdM+qGjTEzLV/3KPuaWj 0qCiF6sf7shzgk4UstrUQ7JN+V5oLJUgY/TKZuPyy69qE6xYqUWvRmnGkYxav8aM 5lTGMXWViksO+EebeE0sNH+R3XHXAxVTI95s4kX57SPcAHItTSMGPPVe2bRErwWJ hiLEu6gRezp/7IDT =56TH -----END PGP SIGNATURE----- Merge tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix annoying logs when building tools in parallel - Fix the Debian linux-headers package build again - Fix the target triple detection for userspace programs on Clang * tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: Fix a few typos in a comment kbuild: userprogs: fix bitsize and target detection on clang kbuild: fix linux-headers package build when $(CC) cannot link userspace tools: fix annoying "mkdir -p ..." logs when building tools in parallel |
||
|
Linus Torvalds
|
ae5fa8ce7e |
Driver core api addition for 6.14-rc3
Here is a driver core new api for 6.14-rc3 that is being added to allow platform devices from stop being abused. It adds a new "faux_device" structure and bus and api to allow almost a straight or simpler conversion from platform devices that were not really a platform device. It also comes with a binding for rust, with an example driver in rust showing how it's used. I'm adding this now so that the patches that convert the different drivers and subsystems can all start flowing into linux-next now through their different development trees, in time for 6.15-rc1. We have a number that are already reviewed and tested, but adding those conversions now doesn't seem right. For now, no one is using this, and it passes all build tests from 0-day and linux-next, so all should be good. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H+sQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yljfwCfdP8AvZeIdx89cqS0djspBSFLw1MAoIpq7Pbi 6BY+VOuDSZNdBKXFLR/x =2qRL -----END PGP SIGNATURE----- Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core api addition from Greg KH: "Here is a driver core new api for 6.14-rc3 that is being added to allow platform devices from stop being abused. It adds a new 'faux_device' structure and bus and api to allow almost a straight or simpler conversion from platform devices that were not really a platform device. It also comes with a binding for rust, with an example driver in rust showing how it's used. I'm adding this now so that the patches that convert the different drivers and subsystems can all start flowing into linux-next now through their different development trees, in time for 6.15-rc1. We have a number that are already reviewed and tested, but adding those conversions now doesn't seem right. For now, no one is using this, and it passes all build tests from 0-day and linux-next, so all should be good" * tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: rust/kernel: Add faux device bindings driver core: add a faux bus for use when a simple device/bus is needed |
||
|
Linus Torvalds
|
56400391b1 |
Serial driver fixes for 6.14-rc3
Here are some small serial driver fixes for some reported problems for 6.14-rc3. Nothing major, just: - sc16is7xx irq check fix - 8250 fifo underflow fix - serial_port and 8250 iotype fixes Most of these have been in linux-next already, and all have passed 0-day testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H/YQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykxAwCbBpzMC3xtuqSw/PCrFGbBNeMVuQcAoKtoQYWr Zro9O1hxTOfbFNeHEVtj =XvcE -----END PGP SIGNATURE----- Merge tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for some reported problems. Nothing major, just: - sc16is7xx irq check fix - 8250 fifo underflow fix - serial_port and 8250 iotype fixes Most of these have been in linux-next already, and all have passed 0-day testing" * tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: Fix fifo underflow on flush serial: 8250_pnp: Remove unneeded ->iotype assignment serial: 8250_platform: Remove unneeded ->iotype assignment serial: 8250_of: Remove unneeded ->iotype assignment serial: port: Make ->iotype validation global in __uart_read_properties() serial: port: Always update ->iotype in __uart_read_properties() serial: port: Assign ->iotype correctly when ->iobase is set serial: sc16is7xx: Fix IRQ number check behavior |
||
|
Linus Torvalds
|
6bfcc5fb2f |
USB fixes for 6.14-rc3
Here are some small USB driver fixes, and new device ids, for 6.14-rc3. Lots of tiny stuff for reported problems, including: - new device ids and quirks - usb hub crash fix found by syzbot - dwc2 driver fix - dwc3 driver fixes - uvc gadget driver fix - cdc-acm driver fixes for a variety of different issues - other tiny bugfixes Almost all of these have been in linux-next this week, and all have passed 0-day testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H/9Q8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ym9YgCeIG0YNJa3Bb8gVQOnNwbOXzSpt84AniHDxqW9 EMqZy36ZYzee04t1wR0b =La/t -----END PGP SIGNATURE----- Merge tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes, and new device ids, for 6.14-rc3. Lots of tiny stuff for reported problems, including: - new device ids and quirks - usb hub crash fix found by syzbot - dwc2 driver fix - dwc3 driver fixes - uvc gadget driver fix - cdc-acm driver fixes for a variety of different issues - other tiny bugfixes Almost all of these have been in linux-next this week, and all have passed 0-day testing" * tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY usb: roles: set switch registered flag early on usb: gadget: uvc: Fix unstarted kthread worker USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist usb: gadget: core: flush gadget workqueue after device removal USB: gadget: f_midi: f_midi_complete to call queue_work usb: core: fix pipe creation for get_bMaxPacketSize0 usb: dwc3: Fix timeout issue during controller enter/exit from halt state USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk usb: cdc-acm: Fix handling of oversized fragments usb: cdc-acm: Check control transfer buffer size before access usb: xhci: Restore xhci_pci support for Renesas HCs USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI USB: serial: option: drop MeiG Smart defines USB: serial: option: fix Telit Cinterion FN990A name USB: serial: option: add Telit Cinterion FN990B compositions USB: serial: option: add MeiG Smart SLM828 usb: gadget: f_midi: fix MIDI Streaming descriptor lengths usb: dwc2: gadget: remove of_node reference upon udc_stop ... |
||
|
Linus Torvalds
|
ba643b6d84 |
- Remove an unused config item GENERIC_PENDING_IRQ_CHIPFLAGS
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmextVEACgkQEsHwGGHe VUpEew//bv6xE+9sUxtKpD4yQFSZmOOAYbSg6TNdxlmlIMXn2JHeOe166TiQHDIv w4QVZuzmmHx11hPC3YVgdMtzU0S/dFWd2LhoguHVALbZ39sxap2tuWIZacDvShyP WKrGAtvb/BOb0lL0yQY3dGwQ+YO7ye0EU+gJLCaWqNC7n0vWfP4gin17k08iNgQg qghwGUNCsYsijfpvimcJB9eqg00pOqnOVnWiE2xGSz5LKy+Yigtd8aNR50mS+Mgt Sl2Dzmesio0B464X+HSj34dhi4GswdjWmqKyuixmOuECp/1rCBakpuq760J0ijOg dliiBHZplavsLcis9Mh/vKzN4Pd5xjXMPsADHpTX/2fpF8yXj9sWpG+xp7UgsJi0 LZASk8LTovstOGiDSF7ff+4iCPlkZTvE77fawfdcrpe4kgUc85VpRWyv7xalbGwj 0Y/6dIkXg9dOwv+1z57i15ws2KDG35d2faF5UH1qfr/wwzp/TloIk5oX1C5d2puh Y5Fohu3S+D+wFgJB0xwkGTXzLTGVn/ElQMF08CvHHvqX3TrA9HNfJ7EahROx/T3i HNjj10YyKXbGwnk7OAQENOKG3SztlxrPk4SEEY4fZ1RvehYYu6qXXHA9vShjDQcN C2Elj42sgoTXr+DBGeVPHE1bD279kxacWZYD2xPx15t74Mu0zis= =tXlN -----END PGP SIGNATURE----- Merge tag 'irq_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq Kconfig cleanup from Borislav Petkov: - Remove an unused config item GENERIC_PENDING_IRQ_CHIPFLAGS * tag 'irq_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Remove unused CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS |
||
|
Linus Torvalds
|
ff1848d81c |
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being enabled after
handoff to the OS - Check CPUID(0x23) leaf and subleafs presence properly - Remove the PEBS-via-PT feature from being supported on hybrid systems - Fix perf record/top default commands on systems without a raw PMU registered -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmextCMACgkQEsHwGGHe VUr7ag/+PjtbKevbeqjQ0RtkA4TF0gpbYMQdE/h5myY4YnxjmsvuiZoNZztgKU6f 48/NJ2Fjf7cjMnTf+vYSxoTh4FmBcnhz16GyRYeF+JczR3LLf0yN/UmUz6V05kti 4pWdbgqa7pPOIVS2NQUcC+rlHNO0kvlpat42e+TGVAGiZAUOtS4jHGE1RqfXp13G lDdiLKVpReuHpVVtvgTuMSvJzLRV/6zJ/+XExzgZI9b2IIwgt7YVS5pPzYCykm2h YMuC7v4e+0epKxuwbGApzPbCquBJvoBq+aTqU4ZMltpENkEHKlm+9gotNeMBaWA9 xMETydcWCjEIqjDHdC1yWrGTlIHSE92KAM7pHASoCuddPmhaHIh/BuTDxfeJBrNn xUuukR1IVzgXZItiQ/Oz/QMNLI+EBpyBZyfb9LM3wiw0jf10+XyLE9zbMZhIc2Y2 hwuBQ1is/dkdBcWLhaSsjHQIpKwY3iYXXjQ/AToXZV4OS8MlTNL49eSlugEisObD AamLQa2JAvw1wzUDe/vj15hbV2dW5bg43qVcTRJpAtg45FnPHynyJo34z7vqYNcb M1ljZtv+LRQeM3d4EHosrDKhhxlcOiUmUxl9E7dFlmutsusz/zW1/kbNebSj0WJt Ssb3lDO4JTNCI1RLb5I6Soe29FukeKmq/RYwlT49ZmRWxhpU6mE= =ThZf -----END PGP SIGNATURE----- Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fixes from Borislav Petkov: - Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being enabled after handoff to the OS - Check CPUID(0x23) leaf and subleafs presence properly - Remove the PEBS-via-PT feature from being supported on hybrid systems - Fix perf record/top default commands on systems without a raw PMU registered * tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Ensure LBRs are disabled when a CPU is starting perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF perf/x86/intel: Clean up PEBS-via-PT on hybrid perf/x86/rapl: Fix the error checking order |
||
|
Linus Torvalds
|
ff3b373ecc |
- Clarify what happens when a task is woken up from the wake queue and make
clear its removal from that queue is atomic -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmexq1MACgkQEsHwGGHe VUq6ghAAoD872KGmQ3YioDZs+FKLpLWvo+6lC2rY+GFQ3oCu4TJfmlsiTGLCyzjv aYwL52diIORD9/Yfn6Sq/ZWkfncoVmwnht+tgVjXeRr3Pb4EnttgWxPRx/xYQizr jgRASpNsRUTr6zNzqEeeQYodIJaInOF5+r26oqYArcN5V9XB9Qaj0+f14UiyB6u+ 53qpEQqQopeLPyG4t59iUfefsaWm2ZIW3EnoWeyI8sRuaapGY/0LHhUAn6vcA++N kuUkliVsk+f/uTNZeJ4zv2uy8DpBXO4kTjmwPVwFz46sJ8RL8P7MOLax7e7fNssw tylwHt4qoLEoB2vg1yMvlUNFMeH85gj8hTyJMsgGtFTbwCH0kLFEoXUz0lfKMS7U A271E1Bumu3OT7FrAnxQahViv02YWG5fcg6R3OidQdSmgoQBIMJwDA2pyKLiq9FL 7mWoNfEqqBWn4O/1qBlf3jCvfFlzXRSSgVzEruoNB93cgzTaQaN5yVgeekMzwJEj NDowmIZRxEN8+lJyMxIGSOGa44aTXu0/+dtehEDeSpsDOXULFc5fpYt4SSa0Jt/F LlgnPGkM1vF0ddG5vDJpGw6B9Dhb82i1oYy2IVwOCkLOXSp2kvLDEI3sqgk5mmlH zFtAV21Zm4jqBke/aF7r+RCYRvDyQkuW0d1+H9okGWLSk7jKauM= =J43o -----END PGP SIGNATURE----- Merge tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Clarify what happens when a task is woken up from the wake queue and make clear its removal from that queue is atomic * tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Clarify wake_up_q()'s write to task->wake_q.next |
||
|
Linus Torvalds
|
592c358ea9 |
- Move a warning about a lld.ld breakage into the verbose setting as said
breakage has been fixed in the meantime - Teach objtool to ignore dangling jump table entries added by Clang -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmexqKkACgkQEsHwGGHe VUpaaw/+Pl6iTpZMXmL3uygZpgWR2QgBHIKcwFF9RcVpRDQ19PlSfSpmb2PL2jOf aKoAWq7MiVo2+yMguXYUj4vn8c+I0bBEQvlseUsYzVOiW3RBK1y39K1HZxCX6r3T y/kpXix25Bjs323cxS73U5gmoW6Wpqi/gFVBljXrLlugtqgXJhUXWCpVTL8lkzuH jLkc9pGGt7UAnOWBsKy3FQNZVy4lz6KC9nlYc6dSbAE5dmldBujBVtr9R8GfNxhe K7L5kiKk50rQmlYfZ8aS2ExG+W4EzInU5QHVS6DMsyEU5a3PS/WxYLFQOibjbcM7 7b8SccJGyNsZLaseNMk2Eud5FDcdGFNH2/wFd/hpVxq5Mrfh2iyG9ADzqtWMFz/6 xt0cc4C56v3tS+m1ticahjkB5l/DlvqLe/N2EVNR+15lIdxoTfeRZSoJlo/o1liu G/nZxDQssr57vmALal6b5js6XRrHqsCQVAN9Y9k6TMPcFYbq4B7YHyTe4Q12ChIg BRu/FJJFNjiC6c7QvJ7U/QNpDT3OPrI5Bp4BRGt+Yn7aujtnxUIAgI5+caEe+ASQ 8DEeLwzfMqUTVSeiUeAPrjN9ep0qox7051GqCsQflJqZ7FH321lhrps66kfkDKR8 3c6hr2SyzLzRsBNnTSliVV9OJHrQS/0psQwyuvIEN6mEh/EAk0A= =fVLM -----END PGP SIGNATURE----- Merge tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: - Move a warning about a lld.ld breakage into the verbose setting as said breakage has been fixed in the meantime - Teach objtool to ignore dangling jump table entries added by Clang * tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Move dodgy linker warn to verbose objtool: Ignore dangling jump table entries |
||
|
Linus Torvalds
|
82ff316456 |
ARM:
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
- Small set of pKVM improvements and cleanups.
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module infrastructure
cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmev2ykUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMvxwf/bw2u08moAYWAjJLROFvfiKXnznLS
iqJ2+jcw0lJ7wDqm4Zw8M5t74Rd+y5yzkLkZOyjav9yBB09zRkItiTHljCNMOQnt
2QptBa3CUN8N+rNnvVRt6dMkhw7z6n7eoFRSIDY2Y9PgiTapbFXPV1gFkMPO6+0f
SyF4LCr0iuDkJdvGAZJAH/Mp8nG6dv/A6a+Q+R1RkbKn9c2OdWw4VMfhIzimFGN6
0RFjbfXXvyO0aU/W/VHwvvuhcjGkAZWfHDdaTXqbvSMhayW562UPVMVBwXdVBmDj
Dk1gCKcbm4WyktbXYW6iOYj3MgdK96eI24ozps4R0aDexsrTRY4IfH4KEg==
=20Ql
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
|
||
|
Linus Torvalds
|
b878a1c072 |
Fix for o32 ptrace/get_syscall_info
-----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmexsT4aHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHAnxRAApYw6GxstHfD83VFsdPwR E3OQlURzGsI8iWp4g/J/e6iC4tUB2pag8RrEYT0kWW2Q9f6LIVgLys3h9mndlM+0 OX1nCTzz4AJ/3bHoXp00ptrdm1MPUuV8lcZGYpB+atig5IjH+4BHeG3Vq1Nr581b y1zy/fIvd47JaJU6S4H30VL+djUXzNUezzNMmcJyO6s790uOMjcvDZgkocfkVVA1 AE1SQ7RDg98GDBn7HaN0SxsWknhZAy0cq00byuRCnqJcnWP+bqUFJzqdhqgiJnG9 PrAiP4XzkThk/I2gBufo/Vtx8UA8x2XCGVqBFlf+8GQIc4IUaM93gU4Y1EBZRViK 3MHFBM8QSA9wl7ZmlfxTQZVGISeIs9jHcL+Ejt3NeJ8tYbDneF5zL0I6uygmGuwI CgK9bN1UDP0MWm+5TyFd3cq0GnxPdhebbK3x/F3pZCfLfjelqanMLrIQIqHqoUUT KrXqOacTeCiFskTliKknipueHBvSXcX+9k8Y+kEWxwQmi1JPxHTYGMDxRVxw1b8S rblwXgY6rK4UeQzY0FGJ1siBOa22lcc3sqRNoq1SIRqUuH8Uq5jSO1frm2YflNWi gGxWwV61c6J4c4o4zCWQe9i6f4ZNokroWkt1Zfwhih/TZzAXQPMKcFArF/Txgz4Z K1E+SEt8fA2BiuKXa1iSqZY= =DHeR -----END PGP SIGNATURE----- Merge tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: "Fix for o32 ptrace/get_syscall_info" * tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: fix mips_get_syscall_arg() for o32 MIPS: Export syscall stack arguments properly for remote use |
||
|
Linus Torvalds
|
ad1b832bf1 |
Devicetree fixes for v6.14:
- Add bindings for QCom QCS8300 clocks, QCom SAR2130P qfprom,
powertip,{st7272|hx8238a} displays,
- Fix compatible for TI am62a7 dss
- Add a kunit test for __of_address_resource_bounds()
-----BEGIN PGP SIGNATURE-----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=gmty
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add bindings for QCom QCS8300 clocks, QCom SAR2130P qfprom, and
powertip,{st7272|hx8238a} displays
- Fix compatible for TI am62a7 dss
- Add a kunit test for __of_address_resource_bounds()
* tag 'devicetree-fixes-for-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: Add powertip,{st7272|hx8238a} as DT Schema description
dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
dt-bindings: display: ti: Fix compatible for am62a7 dss
of: address: Add kunit test for __of_address_resource_bounds()
dt-bindings: clock: qcom: Add QCS8300 video clock controller
dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300
dt-bindings: clock: qcom: Add GPU clocks for QCS8300
|
||
|
Linus Torvalds
|
ad73b9a17d |
This pull request contains the following bug fixes for UML:
- Align signal stack correctly - Convert to raw spinlocks where needed (irq and virtio) - FPU related fixes -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmexEa4WHHJpY2hhcmRA c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wZvCEACnL/iy1h/NX57a5UsRfP+dcpis skIJ+FHZdEErS60Mkqrw7qcOnSvOmLpq/8ZApJ2EFS6w+2XFGNw0Ev7vVSZJRXtM 1WHxcaY3O5qkkbvB8FzFKx9SEmzZg1m8ccofDxgIXJbPOEMpfcYIV4ZgmKtzHGZM GFwoaOIWceIGLBB8YfcGcNNojLpewAJJLZ47KehYvJARLAFYTv0zl5gzUXJWCxc0 7oMbBmshxo74sS62Qd1j818TyDa8hZApP8cC2eNKUX6UMjSqj5L2n40ovSkkVGcw YVovGS4RFYHW8gXIuwH3CpdqLm9rCfmZ2une6kgDSvKNw4bX+nuPvgewBa2QwuWa 9nQlpwFipFoUhfR9Sq+tDZnEGy2vUGfPMJMz2gqMI9yBp5kpFUyt1T/eFxasKs9T ge7nkwHkqovxgtqQ26S5US+uDS450yH2Ga+xRHJXyeNenkeJMrTP2xCR7cjmMsjP y5E0s6XtHPRQ4JFfUqI2btesmAAdMEAyhxdwASd0zvJVf/Q+VCzwWGYgij+s5f5e 3Zqaw1qaVIikDXnlOMpPWcmekMCBhIpi7joYz+BHSeBNjK756i0/YkHDMHDH2PBH AbOPakddGfWSZzHnuNwQWr47L6/rJQl/vAmjtLYwW7Ped70zXoIeiQMkkHyfSTuO 73Fl6RH/W8Q/XJb9pA== =5mdK -----END PGP SIGNATURE----- Merge tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML fixes from Richard Weinberger: - Align signal stack correctly - Convert to raw spinlocks where needed (irq and virtio) - FPU related fixes * tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: convert irq_lock to raw spinlock um: virtio_uml: use raw spinlock um: virt-pci: don't use kmalloc() um: fix execve stub execution on old host OSs um: properly align signal stack on x86_64 um: avoid copying FP state from init_task um: add back support for FXSAVE registers |
||
|
Linus Torvalds
|
5784d8c93e |
Ring buffer fixes for v6.14:
- Enable resize on mmap() error When a process mmaps a ring buffer, its size is locked and resizing is disabled. But if the user passes in a wrong parameter, the mmap() can fail after the resize was disabled and the mmap() exits with error without reenabling the ring buffer resize. This prevents the ring buffer from ever being resized after that. Reenable resizing of the ring buffer on mmap() error. - Have resizing return proper error and not always -ENOMEM If the ring buffer is mmapped by one task and another task tries to resize the buffer it will error with -ENOMEM. This is confusing to the user as there may be plenty of memory available. Have it return the error that actually happens (in this case -EBUSY) where the user can understand why the resize failed. - Test the sub-buffer array to validate persistent memory buffer On boot up, the initialization of the persistent memory buffer will do a validation check to see if the content of the data is valid, and if so, it will use the memory as is, otherwise it re-initializes it. There's meta data in this persistent memory that keeps track of which sub-buffer is the reader page and an array that states the order of the sub-buffers. The values in this array are indexes into the sub-buffers. The validator checks to make sure that all the entries in the array are within the sub-buffer list index, but it does not check for duplications. While working on this code, the array got corrupted and had duplicates, where not all the sub-buffers were accounted for. This passed the validator as all entries were valid, but the link list was incorrect and could have caused a crash. The corruption only produced incorrect data, but it could have been more severe. To fix this, create a bitmask that covers all the sub-buffer indexes and set it to all zeros. While iterating the array checking the values of the array content, have it set a bit corresponding to the index in the array. If the bit was already set, then it is a duplicate and mark the buffer as invalid and reset it. - Prevent mmap()ing persistent ring buffer The persistent ring buffer uses vmap() to map the persistent memory. Currently, the mmap() logic only uses virt_to_page() to get the page from the ring buffer memory and use that to map to user space. This works because a normal ring buffer uses alloc_page() to allocate its memory. But because the persistent ring buffer use vmap() it causes a kernel crash. Fixing this to work with vmap() is not hard, but since mmap() on persistent memory buffers never worked, just have the mmap() return -ENODEV (what was returned before mmap() for persistent memory ring buffers, as they never supported mmap. Normal buffers will still allow mmap(). Implementing mmap() for persistent memory ring buffers can wait till the next merge window. - Fix polling on persistent ring buffers There's a "buffer_percent" option (default set to 50), that is used to have reads of the ring buffer binary data block until the buffer fills to that percentage. The field "pages_touched" is incremented every time a new sub-buffer has content added to it. This field is used in the calculations to determine the amount of content is in the buffer and if it exceeds the "buffer_percent" then it will wake the task polling on the buffer. As persistent ring buffers can be created by the content from a previous boot, the "pages_touched" field was not updated. This means that if a task were to poll on the persistent buffer, it would block even if the buffer was completely full. It would block even if the "buffer_percent" was zero, because with "pages_touched" as zero, it would be calculated as the buffer having no content. Update pages_touched when initializing the persistent ring buffer from a previous boot. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ7DtcxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qmTQAQD1W/xHfS8yLw7BQBjM+6kqExdrKI/D Z378Et0LSWjZBQD/VtPKiSjLhhNgLUBy5fAWS5t4X/DZ49GKhTA36AzGHwE= =1b+2 -----END PGP SIGNATURE----- Merge tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull trace ring buffer fixes from Steven Rostedt: - Enable resize on mmap() error When a process mmaps a ring buffer, its size is locked and resizing is disabled. But if the user passes in a wrong parameter, the mmap() can fail after the resize was disabled and the mmap() exits with error without reenabling the ring buffer resize. This prevents the ring buffer from ever being resized after that. Reenable resizing of the ring buffer on mmap() error. - Have resizing return proper error and not always -ENOMEM If the ring buffer is mmapped by one task and another task tries to resize the buffer it will error with -ENOMEM. This is confusing to the user as there may be plenty of memory available. Have it return the error that actually happens (in this case -EBUSY) where the user can understand why the resize failed. - Test the sub-buffer array to validate persistent memory buffer On boot up, the initialization of the persistent memory buffer will do a validation check to see if the content of the data is valid, and if so, it will use the memory as is, otherwise it re-initializes it. There's meta data in this persistent memory that keeps track of which sub-buffer is the reader page and an array that states the order of the sub-buffers. The values in this array are indexes into the sub-buffers. The validator checks to make sure that all the entries in the array are within the sub-buffer list index, but it does not check for duplications. While working on this code, the array got corrupted and had duplicates, where not all the sub-buffers were accounted for. This passed the validator as all entries were valid, but the link list was incorrect and could have caused a crash. The corruption only produced incorrect data, but it could have been more severe. To fix this, create a bitmask that covers all the sub-buffer indexes and set it to all zeros. While iterating the array checking the values of the array content, have it set a bit corresponding to the index in the array. If the bit was already set, then it is a duplicate and mark the buffer as invalid and reset it. - Prevent mmap()ing persistent ring buffer The persistent ring buffer uses vmap() to map the persistent memory. Currently, the mmap() logic only uses virt_to_page() to get the page from the ring buffer memory and use that to map to user space. This works because a normal ring buffer uses alloc_page() to allocate its memory. But because the persistent ring buffer use vmap() it causes a kernel crash. Fixing this to work with vmap() is not hard, but since mmap() on persistent memory buffers never worked, just have the mmap() return -ENODEV (what was returned before mmap() for persistent memory ring buffers, as they never supported mmap. Normal buffers will still allow mmap(). Implementing mmap() for persistent memory ring buffers can wait till the next merge window. - Fix polling on persistent ring buffers There's a "buffer_percent" option (default set to 50), that is used to have reads of the ring buffer binary data block until the buffer fills to that percentage. The field "pages_touched" is incremented every time a new sub-buffer has content added to it. This field is used in the calculations to determine the amount of content is in the buffer and if it exceeds the "buffer_percent" then it will wake the task polling on the buffer. As persistent ring buffers can be created by the content from a previous boot, the "pages_touched" field was not updated. This means that if a task were to poll on the persistent buffer, it would block even if the buffer was completely full. It would block even if the "buffer_percent" was zero, because with "pages_touched" as zero, it would be calculated as the buffer having no content. Update pages_touched when initializing the persistent ring buffer from a previous boot. * tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Update pages_touched to reflect persistent buffer content tracing: Do not allow mmap() of persistent ring buffer ring-buffer: Validate the persistent meta data subbuf array tracing: Have the error of __tracing_resize_ring_buffer() passed to user ring-buffer: Unlock resize on mmap error |
||
|
Steven Rostedt
|
97937834ae |
ring-buffer: Update pages_touched to reflect persistent buffer content
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home
Fixes:
|
||
|
Steven Rostedt
|
129fe71881 |
tracing: Do not allow mmap() of persistent ring buffer
When trying to mmap a trace instance buffer that is attached to
reserve_mem, it would crash:
BUG: unable to handle page fault for address: ffffe97bd00025c8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 2862f3067 P4D 2862f3067 PUD 0
Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI
CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:validate_page_before_insert+0x5/0xb0
Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89
RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246
RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29
RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08
RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000
R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000
FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __die_body.cold+0x19/0x1f
? __die+0x2e/0x40
? page_fault_oops+0x157/0x2b0
? search_module_extables+0x53/0x80
? validate_page_before_insert+0x5/0xb0
? kernelmode_fixup_or_oops.isra.0+0x5f/0x70
? __bad_area_nosemaphore+0x16e/0x1b0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x77/0x90
? exc_page_fault+0x22b/0x230
? asm_exc_page_fault+0x2b/0x30
? validate_page_before_insert+0x5/0xb0
? vm_insert_pages+0x151/0x400
__rb_map_vma+0x21f/0x3f0
ring_buffer_map+0x21b/0x2f0
tracing_buffers_mmap+0x70/0xd0
__mmap_region+0x6f0/0xbd0
mmap_region+0x7f/0x130
do_mmap+0x475/0x610
vm_mmap_pgoff+0xf2/0x1d0
ksys_mmap_pgoff+0x166/0x200
__x64_sys_mmap+0x37/0x50
x64_sys_call+0x1670/0x1d70
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The reason was that the code that maps the ring buffer pages to user space
has:
page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]);
And uses that in:
vm_insert_pages(vma, vma->vm_start, pages, &nr_pages);
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home
Fixes:
|
||
|
Linus Torvalds
|
496659003d |
i2c-for-6.14-rc3
MAINTAINERS maintenance. Changed email, added entry, deleted entry falling back to a generic one. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmewyegACgkQFA3kzBSg KbYxmBAAlos2INsA+kvuEkvaQ0eXx+T3yEOVyHrwY2Ls41Ze2laR0jI/uWq7Icmn /WeQZKnwgmNc+mlp90AEGf+gVGyvh0VrPAWHTvjtlLNHSzQOP12GcTRg10Z03WGo 0y31c3P3D3GyeO/boVeAe2DuN5m6eT4nntamtdQQcfjpMdWmHKQ8pWvYGBZbSFFn 9YeXE6q0/6zeg3xu7X9CSD1R+szdNfQnilF3VdSVyFdOwHQjZdimFus7UCSilYcV pbARGAC+oz8oZRzLPP1X3j1keFwZM7+L6iVdkIhuh3GhCeEGVVZircvxBIUO9o4J aM4hxZVDZlpZlsMZ3PGBOPQl3ZYRWcoskUx+7gxx7iSIc0p+MD/0IF6EqX3i8eqC 19x+HGi8Evjf1+/NC2ouOGVGMKYc7i0Bf/vCCDBE6X7f4QDZHm2ebQpCU9HsFaJv NPvIM262OuoIigqnDA6Oq/XfD/2fIPLHDgs7f0Vj5WFG4FnRQMn5iBiwJ5qzHtcY T2di9vX6feBJJo9dJ3HcdT1aJMi/H7JHcwd3M2FDE6x5rj5sxWNNKq6xnp2YqlB/ 41p3LYk6dS8F4CcbINqxGJNYat0EIRls/sTiX2Jvw9GewT7HlZc22OuLYK7jR7fe OCD7QMnrRHqneNSmPUet5Y0m4vddxcbUq0pPyGRBls2MoB4lJg8= =cNCH -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "MAINTAINERS maintenance. Changed email, added entry, deleted entry falling back to a generic one" * tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driver MAINTAINERS: delete entry for AXXIA I2C MAINTAINERS: Use my kernel.org address for I2C ACPI work |
||
|
Linus Torvalds
|
f3d8b0ebae |
s390 updates for 6.14-rc3
- Fix isolated VFs handling by verifying that a VF’s parent PF is locally owned before registering it in an existing PCI domain - Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to workaround gcc failure in handling __builtin_constant_p() in this case - Fix CHPID "configure" attribute caching in CIO by not updating the cache when SCLP returns no data, ensuring consistent sysfs output - Remove CONFIG_LSM from default configs and rely on defaults, which enables BPF LSM hook -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmewxaoACgkQjYWKoQLX FBiQAQf/XfD1/DV91nLpGUsV4lrFEbksiptaaVRLkYQmrlvW1jPSTt4u/789jgTW oaFccUL5sPrzFInC5Mv6x1MUH90p3i31PZ4b6+AwiDWFAJbFPj2//CAA8hl2Uci3 ES45/GEQaYCqKXt05l19plapkfONYFnFwM+dI98lAzZAfz7X9g7OxZLaBTbGojSl 1wt3gEta7aFGrJtYUhpKrcDOnxBDWqCOB4h/bL8RzEQ7sAjR1dYJBE7cQIGq3aW/ o9cMYQRRSzPmLVoO8dF/xswHKpU3+ms8peGcoqoaq9oll2oduJp8zijy4JFgVjCE P5HMfDv4i8p+TrqEuvKtMYQC0MhOlA== =mCvM -----END PGP SIGNATURE----- Merge tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix isolated VFs handling by verifying that a VF’s parent PF is locally owned before registering it in an existing PCI domain - Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to workaround gcc failure in handling __builtin_constant_p() in this case - Fix CHPID "configure" attribute caching in CIO by not updating the cache when SCLP returns no data, ensuring consistent sysfs output - Remove CONFIG_LSM from default configs and rely on defaults, which enables BPF LSM hook * tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix handling of isolated VFs s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn() s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES s390/cio: Fix CHPID "configure" attribute caching s390/configs: Remove CONFIG_LSM |
||
|
Uwe Kleine-König
|
b28fb1f2ef |
modpost: Fix a few typos in a comment
Namely: s/becasue/because/ and s/wiht/with/ plus an added article. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |