Fix indents, use of spaces vs. tabs, grouping, remove superfluous
comments, remove some line continuations, wrap macro arguments in
parens, rename dev_priv to display. This is the way.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250618155137.1651865-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Display version 30.02 should be treated the same as other Xe3 IP, but
will have a slightly different set of workarounds.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-2-dnyaneshwar.bhadane@intel.com
wa_16023981245 need to be extended for display version 30.02
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-10-dnyaneshwar.bhadane@intel.com
WCL added a c10 phy connected to port B. PTL code is currently
restricting c10 to phy_a only.
PTL doesn't have a PHY connected to PORT B; as such,there will
never be a case where PTL uses PHY B.
WCL uses PORT A and B with the C10 PHY.Reusing the condition
for WCL and extending it for PORT B should not cause any issues
for PTL.
-v2: Reuse and extend PTL condition for WCL (Matt)
Bspec: 73944
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-9-dnyaneshwar.bhadane@intel.com
Display version 30.02 should be treated the same as other Xe3 IP.
So exteding DMC load path the condition for it.
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-8-dnyaneshwar.bhadane@intel.com
Display version 30.02 has a lower max cdclk rate than 30.00.
Bspec: 68861
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-6-dnyaneshwar.bhadane@intel.com
Bandwidth parameters for WCL have been updated with respect to
previous display releases. Encode them into xe3lpd_3002_sa_info and use
that new struct.
-v2: Resolve conflict to apply patch.
Bspec: 68859
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-5-dnyaneshwar.bhadane@intel.com
Current DSB hardware is apparently a bit borked and likes to signal
spurious GOSUB errors. We already have most for the workarounds for
this in place, but the last part is simply not enabling the corresponding
interrupt.
While at it polish up the w/a comments with the w/a number,
and consistently take the short blurp from the w/a page.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-7-ville.syrjala@linux.intel.com
When using the flip queue, due to the DMC vs. DSB register corruption
problem, we must not issue any register writes from the DSB after
unhalting the DMC. Currently we are doing just that by trying to
restore DSB_PMCTRL* back to a sane state from intel_dsb_finish().
Since the only place left that pokes at DSB_PMCTRL* is intel_dsb_chain()
we can just do DSB_PMCTRL_2/DSB_FORCE_DEWAKE reset in the same place.
The DSB_PMCTRL reset is trickier since we'd have to do it from the
chained DSB itself. But based on my earlier testing
DSB_PMCTRL/DSB_ENABLE_DEWAKE doesn't actually do anything if the DSB
isn't actually enabled, so we can omit the reset to keep things a bit
simpler. We do need to reset DSB_PMCTRL/DSB_ENABLE_DEWAKE before
tarting the DSB however, in case it was left enabled from a previous
use.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-6-ville.syrjala@linux.intel.com
Since the introduction of DSB chaining we no longer need the
DEwake tricks in intel_dsb_commit().
I also need to relocate the DSB_PMCTRL* writes out of
intel_dsb_finish() (due to the flip queue DMC vs. DSB register
corruption issues), and it'll be a bit more straightforward if
I don't have to worry about the non-chained DSB path anymore.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-5-ville.syrjala@linux.intel.com
Pull the magic 20 usec DSB execution deadline into
intel_dsb_arm_exec_time_us(), and also add its counterpart
for the non-arming register write section. For the non-arming
part we'll just throw in a random 80 usec for now so the total
is 100usec. The total exec time will be needed by the upcoming
flip queue code.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-4-ville.syrjala@linux.intel.com
If the free_post is not QW aligned we don't have to memset the
extra DW needed to make it so, as the only way that can happen
is via intel_dsb_reg_write_indexed() which already makes sure
the next DW is zeroed.
Not a big deal, but this is more consistent how all the other
stuff operates that puts instructions into the DSB buffer, and
we'll get a few more of those soon.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-2-ville.syrjala@linux.intel.com
Windows code seems to do some dodgy looking +/-1 adjustments
to some of the vertical timings. Not sure if that's correct
or not, but let's at least cross check some of the values
we got from the hardware to double check whether the GOP
did the same or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314150136.22564-3-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. The only known problematic
monitor is an external SST sink, so keep the quirk disabled always for
eDP and MST sinks. Reenable the quirk after a hotplug event and after
resuming from a power state without hotplug support, until the
subsequent EDID based detection.
v2: Add a helper for determining the need/setting the probing. (Jani)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250609125556.109538-2-imre.deak@intel.com
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. Add an EDID quirk for this. Leave
the quirk enabled by default, allowing it to be disabled after the
monitor is detected.
v2: Fix lockdep wrt. drm_dp_aux::hw_mutex when calling
drm_dp_dpcd_set_probe_quirk() with a dependent lock already held.
v3: Add a helper for determining if DPCD probing is needed. (Jani)
v4:
- s/drm_dp_dpcd_set_probe_quirk/drm_dp_dpcd_set_probe (Jani)
- Fix documentation of drm_dp_dpcd_set_probe().
- Add comment at the end of internal quirk entries.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250609125556.109538-1-imre.deak@intel.com
Add support for EDID based quirks which can be queried outside of the
EDID parser iteself by DRM core and drivers. There are at least two such
quirks applicable to all drivers: the DPCD register access probe quirk
and the 128b/132b DPRX Lane Count Conversion quirk (see 3.5.2.16.3 in
the v2.1a DP Standard). The latter quirk applies to panels with specific
EDID panel names, support for defining a quirk this way will be added as
a follow-up.
v2: Reset global_quirks in drm_reset_display_info().
v3: (Jani)
- Use one list for both the global and internal quirks.
- Drop change for panel name specific quirks.
- Add comment about the way quirks should be queried.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-4-imre.deak@intel.com
An enum list is better suited to define a quirk list, do that. This
makes looking up a quirk more robust and also allows for separating
quirks internal to the EDID parser and global quirks which can be
queried outside of the EDID parser (added as a follow-up).
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-3-imre.deak@intel.com
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see
3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates
Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.
Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The renaming to the timer_*() namespace was delayed due massive conflicts
against Linux-next. Now that everything is upstream finish the conversion.
-----BEGIN PGP SIGNATURE-----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=jJaU
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread via
exit_thread(). exit_thread() invokes io_bitmap_exit() which does the IO
bitmap cleanups, which unfortunately assume that the cleanup is related
to the current task, which is obviously bogus. Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the command
buffer in two places, which keeps stale error messages around. Bring
them back.
- Remove unused trace events
-----BEGIN PGP SIGNATURE-----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=x7j0
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Quit early for unsupported RAPL counters.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db8 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db8 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix typo in the currently unused RAPL_GFX_ALL macro definition.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
