rds_info_getsockopt() pins the destination user pages with FOLL_WRITE and
the RDS_INFO_* producers memcpy the snapshot into them through
kmap_atomic(). Because that copy goes through the kernel direct map, the
dirty bit on the user PTE is never set, so unpin_user_pages() releases the
pages without marking them dirty. A file-backed destination page can then
be reclaimed without writeback, silently discarding the copied data.
Use unpin_user_pages_dirty_lock() with make_dirty=true so the modified
pages are marked dirty before they are unpinned.
Fixes: a8c879a7ee ("RDS: Info and stats")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260608-rds_fix-v1-1-006c88543408@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In vti6_tnl_lookup(), when an exact match for a tunnel fails,
the code falls back to searching for wildcard tunnels:
- Tunnels matching the packet's local address, with any remote address
wildcard remote).
- Tunnels matching the packet's remote address, with any local address
(wildcard local).
However, vti6 stores all these different types of tunnels in the same
hash table (ip6n->tnls_r_l) prone to hash collisions.
The bug is that the fallback search loops in vti6_tnl_lookup() were
missing checks to ensure that the candidate tunnel actually has
a wildcard address.
Fixes: fbe68ee875 ("vti6: Add a lookup method for tunnels with wildcard endpoints.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260608164613.933023-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a60fc3294a ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight.
Fixes: a60fc3294a ("ptp: rework ptp_clock_unregister() to disable events")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260608155952.240304-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tun_put_user() declares an on-stack struct virtio_net_hdr_v1_hash_tunnel
without zeroing it. For a non-tunnel skb, virtio_net_hdr_tnl_from_skb()
only initializes the first 10 bytes (sizeof(struct virtio_net_hdr)),
leaving bytes 10..23 (num_buffers and the hash/tunnel fields) as stack
garbage.
An unprivileged user can set the vnet header size to 24 with
TUNSETVNETHDRSZ, so __tun_vnet_hdr_put() copies all 24 bytes of the
partially-initialized struct to userspace, leaking 14 bytes of kernel
stack on every read of a non-tunnel packet.
Fix it the same way tun_get_user() already does by zeroing the whole
header right after declaration.
Fixes: 288f304351 ("tun: enable gso over UDP tunnel support.")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260607054428.3050243-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_ib_xmit_atomic() always programs a masked atomic opcode
(IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD)
for every RDS atomic cmsg. But the completion-side switch in
rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked
atomic completion falls through to default and returns rm == NULL while
send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the
NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged
AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection
triggers it; on hardware that natively accepts masked atomics (mlx4,
mlx5) no extra setup is needed.
RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR!
Oops: general protection fault [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197]
RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282)
Call Trace:
<IRQ>
rds_ib_send_cqe_handler (net/rds/ib_send.c:282)
poll_scq (net/rds/ib_cm.c:274)
rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294)
tasklet_action_common (kernel/softirq.c:943)
handle_softirqs (kernel/softirq.c:573)
run_ksoftirqd (kernel/softirq.c:479)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt
Handle the masked atomic opcodes in the same case as the non-masked
ones: they map to the same struct rds_message.atomic union member, so
the existing container_of()/rds_ib_send_unmap_atomic() body is correct
for them.
Fixes: 20c72bd5f5 ("RDS: Implement masked atomic operations")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260606192447.1179255-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership.
Fixes: 8605330aac ("tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbs")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260607021819.49698-1-kylebot@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/75af23a89adf881a0895d511775e4770da367cbf.1780873427.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
john1988 and Noam Rathaus reported that vti6_init_net() does not set the
netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0).
Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel)
correctly set this flag during their fallback device initialization to
prevent them from being moved to another network namespace.
Fixes: 61220ab349 ("vti6: Enable namespace changing")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260608155918.787644-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF
chunk can hold the ADDIP header and a parameter header, then calls
af->from_addr_param(), which reads the full address (16 bytes for IPv6)
trusting the parameter's declared length.
An unauthenticated peer can send a truncated trailing ASCONF chunk that
declares an IPv6 address parameter but stops after the 4-byte parameter
header; reached from the no-association lookup path, from_addr_param() then
reads uninitialized bytes past the parameter.
Impact: an unauthenticated SCTP peer makes the receive path read up to 16
bytes of uninitialized memory past a truncated ASCONF address parameter.
The sibling __sctp_rcv_init_lookup() bounds parameters with
sctp_walk_params(); this path open-codes the fetch and omits the bound.
Verify the whole address parameter lies within the chunk before
from_addr_param() reads it, the same class of fix as commit 51e5ad549c
("net: sctp: fix KMSAN uninit-value in sctp_inq_pop").
Fixes: df21857714 ("[SCTP]: Update association lookup to look at ASCONF chunks as well")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260608122234.459098-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs.
Fixes: e5811b8c09 ("bnxt_en: Add IRQ remapping logic.")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/aiNM1CY2-StPilxW@hpe.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and
then lowers outcnt. That leaves removed stream metadata behind, so a
later re-add can reuse a stale ext and hit a null-pointer dereference in
the scheduler get path.
Fix the rollback by tearing down the removed stream state the same way
other stream resizes do. Unschedule the current scheduler state, drop
the removed stream ext state with sctp_stream_outq_migrate(), and then
reschedule the remaining streams.
This keeps scheduler-private RR/FC/PRIO lists consistent while fully
rolling back denied outgoing stream additions.
Fixes: 637784ade2 ("sctp: introduce priority based stream scheduler")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/d78954ecd94954653ee299400e98d74a03a6f7d3.1780603399.git.bronzed_45_vested@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeremy Kerr says:
====================
net: mctp: usb: minor fixes for MCTP over USB transport driver
This series adds a couple of fixes in the ndo_open / ndo_stop path for
the MCTP over USB transport, where we are incorrectly sequencing two
error cases.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
====================
Link: https://patch.msgid.link/20260608-dev-mctp-usb-rx-requeue-v2-0-29a3aa507609@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the ndo_open path, a deferred queue open will report a failure, and
so the netdev will not be ndo_stop()ed, leaving us with the rx_retry
work potentially pending.
Don't report a deferred queue as an error, as we are still operational.
This means we use the ndo_stop() path for future cleanup, which handles
rx_retry_work cancellation.
Fixes: 0791c0327a ("net: mctp: Add MCTP USB transport driver")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260608-dev-mctp-usb-rx-requeue-v2-2-29a3aa507609@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's possible that sequencing between setting ->stopped and cancelling
the rx_retry work (in ndo_stop) could leave us with an urb queued:
T1: ndo_stop T2: rx_retry_work
------------ ----------------
LD: ->stopped => false
ST: ->stopped <= true
usb_kill_urb()
mctp_usb_rx_queue()
usb_submit_urb()
cancel_delayed_work_sync()
That urb completion can then re-schedule rx_retry_work.
Strenghen the sequencing between the stop (preventing another requeue)
and the cancel by updating both atomically under a new rx lock. After
setting ->rx_stopped, and cancelling pending work, we know that the
requeue cannot occur, so all that's left is killing any pending urb.
Fixes: 0791c0327a ("net: mctp: Add MCTP USB transport driver")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260608-dev-mctp-usb-rx-requeue-v2-1-29a3aa507609@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
netvsc_copy_to_send_buf() copies page buffer entries into the VMBus
send buffer using phys_to_virt() on the entry PFN. Entries for the
RNDIS header and the skb linear data come from kmalloc'd memory and
are always in the kernel direct map, but entries for skb fragments
reference page cache or user pages, which on 32-bit x86 with
CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page
phys_to_virt() returns an address outside the direct map and the
subsequent memcpy() faults on the transmit softirq path, which is
fatal.
Map the pages with kmap_local_page() instead, handling two properties
of the page buffer entries:
- pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity,
not a native PFN. Reconstruct the physical address first and derive
the native page from it, so the mapping stays correct where
PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages).
- Since commit 41a6328b2c ("hv_netvsc: Preserve contiguous PFN
grouping in the page buffer array"), an entry describes a full
physically contiguous fragment and pb[i].len can exceed PAGE_SIZE,
while kmap_local_page() maps a single page. Copy page by page,
splitting at native page boundaries.
The copy path only handles packets smaller than the send section size
(6144 bytes by default); larger packets take the cp_partial path where
only the RNDIS header is copied. So entries here are bounded by the
section size and a copy is split at most once on 4K-page systems. On
!CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and
no mapping work is added.
Fixes: c25aaf814a ("hyperv: Enable sendbuf mechanism on the send path")
Cc: stable@vger.kernel.org
Signed-off-by: Anton Leontev <leontyevantony@gmail.com>
Link: https://patch.msgid.link/20260604165938.32033-1-leontyevantony@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If rvu_npc_exact_init() fails in rvu_setup_hw_resources(), the function
returns directly instead of jumping to the error handling path. This
causes a resource leak for the previously initialized CGX, NPC, fwdata,
and MSI-X states.
Fix this by replacing the direct return with goto cgx_err to ensure
proper cleanup.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have
access to Marvell OcteonTX2 RVU AF hardware to test with, no runtime
testing was able to be performed.
Fixes: 3571fe07a0 ("octeontx2-af: Drop rules for NPC MCAM")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260604143756.1524482-1-dawei.feng@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix modification of the received skbuff in rxrpc_input_soft_acks() and a
potential incorrect access of the buffer in a fragmented UDP packet (the
packet would probably have to be deliberately pre-generated as fragmented)
when AF_RXRPC tries to extract the contents of the SACK table by copying
out the contents of the SACK table into a buffer before attempting to parse
AF_RXRPC assumes that it can just call skb_condense() and then validly
access the SACK table from skb->data and that it will be a flat buffer -
but skb_condense() can silently fail to do anything under some
circumstances.
Note that whilst rxrpc_input_soft_acks() should be able to parse extended
ACKs, the rest of AF_RXRPC doesn't currently support that.
Further, there's then no need to call skb_condense() in rxrpc_input_ack(),
so don't.
Fixes: d57a3a1516 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
Reported-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://lore.kernel.org/r/20260513180907.2061972-1-michael.bommarito@gmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: stable@kernel.org
Link: https://patch.msgid.link/105362.1780573560@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If usb_reset_device() returns a negative error code, stop the
process of probing.
Fixes: 10c3271712 ("r8152: disable the ECM mode")
Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260604092247.27158-450-nic_swsd@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the patch in the "Fixes" tag, the allocation of the "reply" skb
can happen either before or after locking the ovs_mutex.
However, error cleanups still follow the classical reversed order,
assuming "reply" is allocated before locking: it is freed after unlocking.
If "reply" allocation happens after locking the mutex and it fails,
"reply" is left with an ERR_PTR, and execution jumps to the correspondent
cleanup stage which will try to free an invalid pointer.
Fix this by setting the pointer to NULL after having saved its error
value.
Fixes: 893f139b9a ("openvswitch: Minimize ovs_flow_cmd_new|set critical sections.")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260604121946.942164-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function
entry and continues using it after iptunnel_handle_offloads().
For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone().
When the skb header is cloned, skb_header_unclone() can call
pskb_expand_head(), which may move the skb head. The pskb_expand_head()
contract requires pointers into the skb header to be reloaded after the
call.
If the later skb_realloc_headroom() branch is not taken, SIT uses the
stale iph6 pointer to read the inner hop limit and DS field. That can
read from a freed skb head after the old head's remaining clone is
released.
Reload iph6 after the offload helper succeeds and before subsequent
reads from the inner IPv6 header. Keep the existing reload after
skb_realloc_headroom(), since that branch can also replace the skb.
Fixes: 14909664e4 ("sit: Setup and TX path for sit/UDP foo-over-udp encapsulation")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+6eb9ca986d80f6f88cf9@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260605073448.6524-1-kylebot@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a sf is created after a CPU has been taken offline, the IRQ pool may
contain IRQs with affinity masks that include the offline CPU. Since only
online CPUs should be considered for IRQ placement, cpumask_subset() check
would fail because the iter_mask contains offline CPUs that are not present
in req_mask, causing sf creation to fail.
This is an example:
1. When mlx5 driver loads, it initializes the IRQ pools.
For sf_ctrl_pool with ≤64 sf:
- xa_num_irqs = {N, N} (There is only one slot)
2. When the first SF is created:
- The ctrl IRQ is allocated with mask=cpu_online_mask={0-191}
2. We take CPU 20 offline
3. Existing ctl irq still have mask={0-191}
4. Create a new SF:
- req_mask={0-19,21-191}
- iter_mask={0-191}
- {0-191} is NOT a subset of {0-19,21-191}
- least_loaded_irq=NULL
5. Try to allocate a new irq via irq_pool_request_irq()
6. xa_alloc() fails because the pool is full(There is only one slot)
7. sf creation fails with error
Use irq_get_effective_affinity_mask() instead, which returns the IRQ's
actual effective affinity that already excludes offline CPUs.
Fixes: 061f5b2358 ("net/mlx5: SF, Use all available cpu for setting cpu affinity")
Suggested-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260605102112.91772-1-fushuai.wang@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame()
returns false (e.g. XDPSQ is full), the function returns without
unmapping the DMA address or freeing the xdp_frame allocated by
xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on
success, so the completion path cannot recover these entries.
With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind:
DMA-API: pci 0000:08:00.0: device driver has pending DMA
allocations while released from device [count=1116]
One of leaked entries details: [device address=0x000000010ffd7028]
[size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy]
WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180
...
DMA-API: Mapped at:
debug_dma_map_phys+0x4b/0xd0
dma_map_phys+0xfd/0x2d0
mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core]
mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core]
mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core]
Add the missing unmap + xdp_return_frame, matching the cleanup already
done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch,
so no per-frag unmap is needed.
Fixes: 84a0a2310d ("net/mlx5e: XDP_TX from UMEM support")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260604135446.456119-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using
the PF's log_max_current_uc/mc_list capabilities. When querying a VF
vport with a larger configured max (via devlink), the firmware response
can overflow this buffer:
BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385
CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_report+0x176/0x4e4
kasan_report+0xc8/0x100
mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core]
esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core]
esw_vport_change_handler+0x6a/0x90 [mlx5_core]
process_one_work+0x87f/0x15e0
worker_thread+0x62b/0x1020
kthread+0x375/0x490
ret_from_fork+0x4dc/0x810
ret_from_fork_asm+0x11/0x20
</TASK>
Fix by querying the vport's own HCA caps to size the buffer correctly.
Refactor the function to allocate and return the MAC list internally,
removing the caller's dependency on knowing the correct max.
Fixes: e16aea2744 ("net/mlx5: Introduce access functions to modify/query vport mac lists")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260604135849.458060-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In qrtr_port_remove(), the socket reference count is decremented via
__sock_put() before the port is removed from the qrtr_ports XArray and
before the RCU grace period elapses.
This breaks the fundamental RCU update paradigm. It exposes a race
window where a concurrent RCU reader (such as qrtr_reset_ports() or
qrtr_port_lookup()) can obtain a pointer to the socket from the XArray,
and attempt to call sock_hold() on a socket whose reference count has
already dropped to zero.
This exact race condition was hit during syzkaller fuzzing, leading to
the following refcount saturation warning and a potential Use-After-Free:
refcount_t: saturated; leaking memory.
WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0
Modules linked in: qrtr(+) bochs drm_shmem_helper ...
Call Trace:
<TASK>
qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr]
__qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr]
qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr]
kernel_bind+0xe4/0x120 net/socket.c:3592
qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr]
qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr]
do_one_initcall+0xf5/0x5e0 init/main.c:1283
...
</TASK>
Fix this by deferring the reference count decrement until after the
xa_erase() and the synchronize_rcu() complete.
(Note: The v1 of this patch incorrectly replaced __sock_put() with
sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove()
still hold a reference to the socket, so freeing the socket memory here
would lead to a subsequent UAF in the caller. Thus, the __sock_put() is
kept, but only repositioned to close the RCU race.)
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260604064801.1180388-1-w15303746062@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxime Chevallier says:
====================
net: phy: some cleanups following phy_port SFP
While posting the v11 of phy_port netlink, sashiko found some
pre-existing issues, and following the tentative fix, Nicolai found
some more :)
This is V3, with a re-ordering of the port/sfp cleanup, as well as a new
patch (patch 3) that also reorders the phy_remove() path.
====================
Link: https://patch.msgid.link/20260604092819.723505-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We don't have support for PHY-driver SFP cages with the genphy code.
On top of that, it was found by sashiko that running
sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY
probing runs under RTNL, which isn't the case for non-genphy drivers.
This problem was reproduced, and does lead to a deadlock on RTNL.
Before the blamed commit, the phy_sfp_probe() call was made by
individual PHY drivers, so there was no way to get to the SFP probing
path when using genphy.
Let's therefore only run phy_sfp_probe when not using genphy.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Fixes: bad869b5e4 ("net: phy: Only rely on phy_port for PHY-driven SFP")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260604092819.723505-5-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported by sashiko when looking a other patches, we need to ensure
that the downstream SFP bus gets unregistered prior to destroying the
phy_ports attached to a phy_device, as the SFP code may reference these
ports. Let's make sure we follow that ordering in phy_remove().
Fixes: 589e934d27 ("net: phy: Introduce PHY ports representation")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260604092819.723505-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported that we don't call sfp_bus_del_upstream() in the probe
failure path, so let's add it, otherwise the sfp-bus is left with a
dangling 'upstream' field, that may be used later on during SFP events.
This issue existed before the generic phylib sfp support, back when
drivers were calling phy_sfp_probe themselves.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Fixes: 298e54fa81 ("net: phy: add core phylib sfp support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260604092819.723505-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko flags that genlmsg_reply() always consumes the skb.
The error path calls nlmsg_free(rsp) so we can't jump directly
to it. Let's not unbind, just propagate the error to the user.
This is the typical way of handling genlmsg_reply() failures.
They shouldn't happen unless user does something silly like
calling the kernel with an already-full rcvbuf.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 170aafe35c ("netdev: support binding dma-buf to netdevice")
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phonet_device_destroy() removes a phonet_device from the per-net device
list with list_del_rcu(), but frees it immediately. RCU readers walking
the same list can still hold a pointer to the object after it has been
removed, leading to a slab-use-after-free.
Use kfree_rcu(), matching the lifetime rule already used by
phonet_address_del() for the same object type.
Fixes: eeb74a9d45 ("Phonet: convert devices list to RCU")
Cc: stable@vger.kernel.org
Signed-off-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver was using devm_register_netdev() which causes unregister_netdev()
to be deferred until the devres cleanup phase, which runs after emac_remove()
returns. This creates a use-after-free window where:
1. emac_remove() is called, which tears down hardware (cancels work, detaches
modules, unregisters from MAL)
2. emac_remove() returns
3. devres cleanup runs and finally calls unregister_netdev()
During step 3, the network stack might still process packets, triggering
emac_irq(), emac_poll(), or other handlers that access now-freed hardware
resources (dev->emacp, dev->mal, etc.).
Fix this by replacing devm_register_netdev() with manual register_netdev()
and calling unregister_netdev() at the beginning of emac_remove(), before
any hardware teardown. This ensures the network device is fully stopped and
unregistered before hardware resources are released.
The change is safe because:
- dev->ndev is assigned very early in probe (before any error paths that
could bypass emac_remove)
- platform_set_drvdata() is only called after successful registration, so
emac_remove() only runs for fully registered devices
- unregister_netdev() is idempotent and safe to call on any registered device
Fixes: a4dd8535a5 ("net: ibm: emac: use devm for register_netdev")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx4_init_user_cqes() fills a scratch buffer with the CQE
initialization pattern and then copies from that buffer to userspace.
In the single-copy path, the copy length is array_size(entries,
cqe_size), but the scratch buffer is allocated with PAGE_SIZE. GCC 10
does not carry the branch invariant strongly enough through the object
size checks and falsely triggers __bad_copy_from().
Size the scratch buffer to the actual copy length for the active path,
keep array_size() for the single-copy case, and retain a WARN_ON_ONCE()
guard for the PAGE_SIZE invariant before allocating the buffer.
Fixes: f69bf5dee7 ("net/mlx4: Use array_size() helper in copy_to_user()")
Signed-off-by: Yao Sang <sangyao@kylinos.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without
first ensuring the data is in the linear area via pskb_may_pull(). When
the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in
page fragments) while skb_gro_offset is non-zero (after IP+TCP header
parsing). The skb_pull() then decrements skb->len by skb_gro_offset
but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len)
in __skb_pull().
The UDP fraglist GRO path already contains this guard at
udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides
centralized protection for all callers (TCP, UDP, and any future
protocols), and ensures the precondition of skb_pull() is satisfied
before it is called.
On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the
skb is not held as a new GRO head and is instead delivered through the
normal receive path, matching the UDP handling.
Fixes: 8d95dc474f ("net: add code for TCP fraglist GRO")
Reported-by: HanQuan <eilaimemedsnaimel@gmail.com>
Reported-by: MingXuan <bwnie0730@outlook.com>
Signed-off-by: HanQuan <eilaimemedsnaimel@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets
to users with CAP_NET_ADMIN capability.
This blocks potential side-channel attack where an unprivileged application
attaches a filter to leak TCP sequence/acknowledgment numbers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Tamir Shahar <tamirthesis@gmail.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask
attributes. This rejects short attributes during policy validation and
also exposes the exact length requirements through policy introspection.
Fixes: 8cc44579d1 ("NetLabel: Introduce static network labels for unlabeled connections")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The firmware advertises context memory (backing store) types
through a linked list, with BNGE_CTX_INV serving as the
end-of-list sentinel.
However, the driver incorrectly assumes that the list is strictly
ordered and prematurely terminates traversal when it encounters
an unrecognized type (>=BNGE_CTX_V2_MAX). As a result, any valid
context types that appear later in the chain are silently skipped,
leading to incomplete memory configuration and eventual driver load
failure.
Fix this by traversing the entire list until the BNGE_CTX_INV sentinel
is reached, while safely ignoring only those context types that fall
outside the supported range.
Fixes: 29c5b358f3 ("bng_en: Add backing store support")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Dharmender Garg <dharmender.garg@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add dma_rmb() barrier after req_id completion check in
ena_com_phc_get_timestamp(). On weakly-ordered architectures,
payload fields may be read before req_id is observed as updated.
Fixes: e0ea34158e ("net: ena: Add PHC support in the ENA driver")
Closes: https://sashiko.dev/#/patchset/20260430032507.11586-1-akiyano%40amazon.com
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of_reserved_mem_lookup() may return NULL if the reserved memory region
referenced by the "memory-region" phandle is not found in the reserved
memory table (e.g. due to a misconfigured DTS or a removed
memory-region node). The current code dereferences the returned
pointer without checking for NULL, leading to a kernel NULL pointer
dereference at the following lines:
dma_addr = rmem->base; // line 1156
num_desc = div_u64(rmem->size, buf_size); // line 1160
Add a NULL check after of_reserved_mem_lookup() and return -ENODEV if
the lookup fails, which is consistent with the existing error handling
for of_parse_phandle() failure in the same code block.
Fixes: 3a1ce9e3d0 ("net: airoha: Add the capability to allocate hwfd buffers via reserved-memory")
Cc: stable@vger.kernel.org
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current code incorrectly uses VIRTCHNL2_CAP_PTP_SET_DEVICE_CLK_TIME
for both direct and mailbox capabilities, causing mailbox-only support
to be ignored and potentially reporting IDPF_PTP_NONE.
Fixes: d5dba8f720 ("idpf: add PTP clock configuration")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260602225513.393338-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The U.FL2 input pin advertises DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE
in its capability mask, but ice_dpll_pin_ufl_ops does not provide
.prio_get and .prio_set callbacks. As a result the DPLL subsystem
cannot report or accept priority for U.FL pins: pin-get omits the prio
field on U.FL2 and pin-set with prio is rejected as invalid, even
though the capability is present. This prevents user space from using
priority to select or disable U.FL2 as a DPLL input source.
Reproducer with iproute2 (dpll command):
# dpll pin show board-label U.FL2
pin id 16:
module-name ice
board-label U.FL2
type ext
capabilities priority-can-change|state-can-change
parent-device:
id 0 direction input state selectable phase-offset 0
/* note: no "prio" between "direction" and "state",
even though priority-can-change is advertised */
# dpll pin set id 16 parent-device 0 prio 5
RTNETLINK answers: Operation not supported
After the fix the prio field is reported by pin show and pin set with
prio is accepted on U.FL2.
Add the missing .prio_get and .prio_set callbacks to
ice_dpll_pin_ufl_ops, reusing ice_dpll_sw_input_prio_{get,set}. The
same ops struct is shared by U.FL1 and U.FL2: U.FL2 (input) delegates
to the backing hardware input pin, while U.FL1 (output) does not
advertise DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE so the dpll core
capability gate never invokes prio_set for it, and prio_get reports
the OUTPUT sentinel (ICE_DPLL_PIN_PRIO_OUTPUT) on the output side
exactly like the SMA path does today.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260602225513.393338-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Platform devices created with platform_device_alloc() call
platform_device_release() when the last reference to the device's
kobject is dropped. This function calls of_node_put() unconditionally.
This works fine for devices created with platform_device_register_full()
but users of the split approach (platform_device_alloc() +
platform_device_add()) must bump the reference of the of_node they
assign manually. Add the missing call to of_node_get().
Cc: stable@vger.kernel.org
Fixes: 76723bca28 ("net: mv643xx_eth: add DT parsing support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260602073414.22500-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and
flushes every fragment queue that is not yet complete using
inet_frag_queue_flush(). That helper frees all the skbs queued on the
fragment queue but does not set INET_FRAG_COMPLETE, and leaves
q->fragments_tail and q->last_run_head pointing at the freed skbs.
The queue itself stays in the rhashtable.
fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups,
but it cannot stop a fragment that already obtained the queue through
inet_frag_find() earlier and stalled just before taking the queue lock.
Once that fragment resumes after the flush and takes the queue lock,
it passes the INET_FRAG_COMPLETE check and then dereferences the freed
fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of
that pointer and, on the append path, writes ->next_frag, causing a
slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly
share the same flush path and are affected as well.
Reset rb_fragments, fragments_tail and last_run_head in
inet_frag_queue_flush() so a flushed queue no longer points at the
freed skbs. A fragment that resumes after the flush and takes the
queue lock then finds an empty queue and starts a new run instead of
dereferencing the freed fragments_tail. ip_frag_reinit() already
performed this reset after its own flush, so drop the now duplicate
code there.
Cc: stable@vger.kernel.org
Fixes: 006a5035b4 ("inet: frags: flush pending skbs in fqdir_pre_exit()")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://patch.msgid.link/ah6ukYq5G98LshdA@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi: mvm: don't support the reset handshake for old firmwares
- wifi: iwlwifi: pcie: simplify the resume flow if fast resume is
not used, work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter: conntrack_irc: fix possible out-of-bounds read
- netfilter: bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered during
NVMe over MPTCP testing
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zpoM
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
- Fix CFI violation in probestub function
The probestub is a function to allow tprobes to hook to a tracepoint to
gain access to its parameters. The function itself is only referenced by
the tracepoint structure which lives in the __tracepoint section.
objtool explicitly ignores that section and when processing functions in
the kernel, if it detects one that has no references it will seal it to
have its ENDBR stripped on boot up. This means the probstub function
will have its ENDBR stripped and if a tprobe is attached to it with IBT
enabled, it will go *boom*.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaiFBrBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgsiAP9+ys3b4sK8rajS7OW6kgKSOjN7ezqp
pHNdKmiLgsIsGAD+L1GRMqR4XDw0N8IH+GIRzLd5O/b0gwYSI11lopVVsAk=
=QdWS
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- Fix CFI violation in probestub function
The probestub is a function to allow tprobes to hook to a tracepoint
to gain access to its parameters.
The function itself is only referenced by the tracepoint structure
which lives in the __tracepoint section. objtool explicitly ignores
that section and when processing functions in the kernel, if it
detects one that has no references it will seal it to have its ENDBR
stripped on boot up.
This means the probstub function will have its ENDBR stripped and if
a tprobe is attached to it with IBT enabled, it will go *boom*.
* tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix CFI violation in probestub being called by tprobes
- Enable IOMMUFD and VFIO cdev such that PCI pass-through
to QEMU/KVM can optionally utilize native IOMMUFD
- With HAVE_ARCH_BUG_FORMAT enabled the BUG infrastructure
might misinterpret flags or fault. Fix this by moving the
"format" field emission into __BUG_ENTRY()
- The generic version of _THIS_IP_ is known to be brittle
and may break with current and future GCC and Clang
optimizations. Fix it by overriding _THIS_IP_
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaiEazRccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8KNjAP4/q8Q7AW6/lj5MDaOBXzJ+FkEB
3ZJjgWOSvaXRS2fjTAD/cxOnhZELxZ98XcYbF+KrCBbMSUec7zoYzMsGbO0oegQ=
=5yIB
-----END PGP SIGNATURE-----
Merge tag 's390-7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Enable IOMMUFD and VFIO cdev such that PCI pass-through to
QEMU/KVM can optionally utilize native IOMMUFD
- With HAVE_ARCH_BUG_FORMAT enabled the BUG infrastructure might
misinterpret flags or fault. Fix this by moving the "format"
field emission into __BUG_ENTRY()
- The generic version of _THIS_IP_ is known to be brittle and may
break with current and future GCC and Clang optimizations. Fix
it by overriding _THIS_IP_
* tag 's390-7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Implement _THIS_IP_ using inline asm
s390/bug: Always emit format word in __BUG_ENTRY
s390/configs: Enable IOMMUFD and VFIO cdev in defconfigs
This reverts commit 850d9248d2.
This reapplies commit 325eb217e4 ("bnxt_en: bring back rtnl_lock()
in the bnxt_open() path").
Breno reports a lockdep warning in bnxt. During FW reset the driver
may end up calling netif_set_real_num_tx_queues() (if queue count
changes), so calls to bnxt_open() still require rtnl_lock.
net/sched/sch_generic.c:1416 suspicious rcu_dereference_protected() usage!
dev_qdisc_change_real_num_tx+0x54/0xe0
netif_set_real_num_tx_queues+0x4ed/0xa80
__bnxt_open_nic+0x9cb/0x3490
bnxt_open+0x1cb/0x370
bnxt_fw_reset_task+0x80d/0x1e80
process_scheduled_works+0x9c1/0x13b0
The reverted commit was just an optimization / experiment
so let's go back to taking the lock.
Reported-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/ah726OtFX-Qw3U-R@gmail.com
Fixes: 850d9248d2 ("Revert "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260603195845.2574426-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
Oops: general protection fault, probably for non-canonical address 0x1010000800004a0
CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full)
RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline]
RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047
Call Trace:
<IRQ>
bpf_prog_4675cb904b7071f8+0x12e/0x14e
bpf_prog_run_pin_on_cpu+0xc6/0x1f0
sk_psock_verdict_recv+0x1ba/0x350
udp_read_skb+0x31a/0x370
sk_psock_verdict_data_ready+0x2e3/0x600
__udp_enqueue_schedule_skb+0x4c8/0x650
udpv6_queue_rcv_one_skb+0x3ec/0x740
udp6_unicast_rcv_skb+0x11d/0x140
ip6_protocol_deliver_rcu+0x61e/0x950
ip6_input_finish+0xa9/0x150
NF_HOOK+0x286/0x2f0
ip6_input+0x117/0x220
NF_HOOK+0x286/0x2f0
__netif_receive_skb+0x85/0x200
process_backlog+0x374/0x9a0
__napi_poll+0x4f/0x1c0
net_rx_action+0x3b0/0x770
handle_softirqs+0x15a/0x460
do_softirq+0x57/0x80
</IRQ>
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above.
Fixes: 965b57b469 ("net: Introduce a new proto_ops ->read_skb()")
Cc: stable@vger.kernel.org
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260603162737.697215-1-rhkrqnwk98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted
7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Yuqi Xu <xuyq21@lenovo.com>
Reported-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/94318159b9052907a6cbb7256aee8b5f8dfbfccb.1780510304.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
