mirror of
https://github.com/torvalds/linux.git
synced 2026-07-27 17:47:41 +02:00
4b0f556deb
1440650 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Vishnu Sankar
|
4b0f556deb |
HID: lenovo: Use KEY_PERFORMANCE capability for ThinkPad X12 Tab Gen 2
The X12 Tab Gen 2 emits KEY_PERFORMANCE via Fn+F8 through the raw event handler but never declared the capability via input_set_capability(). This prevents userspace tools from discovering the key through evdev capability bits. Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Vishnu Sankar
|
df72cacda3 |
HID: lenovo: Add support for ThinkPad X13 Folio keyboard
Add USB ID support for the ThinkPad X13 detachable keyboard. The Keyboard uses the same HID raw event protocol as the ThinkPad X12 Gen 2. The functionality stays the same with X12 Gen 2 Keyboards. Also declare KEY_PERFORMANCE capability in lenovo_input_configured() for X13 detachable, allowing userspace to discover the key via evdev capability bits. Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Manish Khadka
|
73fde0cbff |
HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove()
hid_go_cfg_probe() initialises drvdata.go_cfg_setup and schedules it
to run 2 ms later:
INIT_DELAYED_WORK(&drvdata.go_cfg_setup, &cfg_setup);
schedule_delayed_work(&drvdata.go_cfg_setup, msecs_to_jiffies(2));
cfg_setup() dereferences drvdata.hdev to issue MCU command requests.
hid_go_cfg_remove() tears down sysfs and stops the HID device, but
never drains the delayed work. If the device is unbound within the
2 ms scheduling delay (a probe failure rolling back via remove, or a
fast rmmod after probe), the work fires after hid_destroy_device()
has dropped its reference and released the underlying hdev struct,
leaving cfg_setup() with a stale drvdata.hdev pointer.
Mirror the sibling driver hid-lenovo-go-s.c, whose hid_gos_cfg_remove()
already calls cancel_delayed_work_sync() on its analogous work, and
drain go_cfg_setup at the top of hid_go_cfg_remove(). The cancel
must come before guard(mutex)(&drvdata.cfg_mutex) because cfg_setup()
acquires that mutex; reversing the order would deadlock.
Fixes:
|
||
|
Rafael Passos
|
426e5846eb |
HID: Input: Add battery list cleanup with devm action
The batteries list (hdev->batteries) is not cleaned up during
hidinput_disconnect(), but struct hid_battery entries are allocated
with devm_kzalloc.
When a driver is unbound (e.g. during devicereprobe), devm frees those
entries while their list_head nodesremain dangling in hdev->batteries,
which persists across rebinds.
Link: https://lore.kernel.org/all/20260602011949.2825852-1-rafael@rcpassos.me/
Fixes:
|
||
|
Lee Jones
|
c0a8899e02 |
HID: wacom: Fix OOB write in wacom_hid_set_device_mode()
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Louis Clinckx
|
da7f96a68c |
HID: lenovo-go: drop dead NULL check on to_usb_interface()
to_usb_interface() is a container_of_const() macro: it performs pointer arithmetic and never returns NULL. The if (!intf) and if (intf) tests in get_endpoint_address() can never fire. Remove them in both drivers. No functional change. Suggested-by: Derek J. Clark <derekjohn.clark@gmail.com> Signed-off-by: Louis Clinckx <clinckx.louis@gmail.com> Reviewed-by: Derek J. Clark <derekjoh.clark@gmail.com> Tested-by: Derek J. Clark <derekjohn.clark@gmail.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> |
||
|
Louis Clinckx
|
2ee7e63240 |
HID: lenovo-go: reject non-USB transports in probe
These drivers only match HID_USB_DEVICE() entries and assume the underlying bus is USB. Make that explicit at probe by rejecting any non-USB hdev, following the pattern used by other HID drivers. Signed-off-by: Louis Clinckx <clinckx.louis@gmail.com> Reviewed-by: Derek J. Clark <derekjoh.clark@gmail.com> Tested-by: Derek J. Clark <derekjohn.clark@gmail.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> |
||
|
Kean
|
c7ee0b73c8 |
HID: lenovo: Fix buffer over-read and unaligned access in X12 Tab raw_event handler
In lenovo_raw_event(), the X12 Tab keyboard handler reads a 4-byte
little-endian value from the raw HID report buffer but:
1. The size guard is size >= 3, while the access reads 4 bytes.
A malformed 3-byte report with ID 0x03 would over-read the
buffer by one byte.
2. Casting u8 *data directly to __le32 * can trigger unaligned
access faults on architectures like ARM, MIPS, and SPARC,
because HID input buffers carry no alignment guarantee.
(e.g. uhid payloads start at offset 6 in struct uhid_event,
giving only 2-byte alignment.)
Fix both by tightening the size check to >= 4 and replacing the
open-coded cast + le32_to_cpu() with get_unaligned_le32(), which
handles the LE-to-CPU conversion safely regardless of alignment.
Link: https://sashiko.dev/#/message/20260512044911.99B6DC2BCB0%40smtp.kernel.org
Assisted-by: CLAUDE:claude-4-sonnet
Signed-off-by: Kean <rh_king@163.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
||
|
hlleng
|
07466fc91c |
HID: quirks: Add ALWAYS_POLL quirk for SIGMACHIP USB mouse
The SIGMACHIP USB mouse with VID/PID 1c4f:0034 can disconnect and re-enumerate repeatedly after it has been enumerated if its interrupt endpoint is not continuously polled. This was observed with the device reporting itself as "SIGMACHIP Usb Mouse". Keeping the input event device open avoids the disconnects. Add HID_QUIRK_ALWAYS_POLL for this device so the HID core keeps polling it even when there is no userspace input consumer. Cc: stable@vger.kernel.org Signed-off-by: hlleng <a909204013@gmail.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> |
||
|
Liu Kai
|
dd2147375a |
HID: remove duplicate hid_warn_ratelimited definition
The hid_warn_ratelimited macro is defined twice in include/linux/hid.h: - first one added by commit |
||
|
Myeonghun Pak
|
2e78b21864 |
HID: u2fzero: free allocated URB on probe errors
u2fzero_fill_in_urb() allocates dev->urb with usb_alloc_urb(), but u2fzero_probe() ignored its return value and only freed the URB from u2fzero_remove(). If LED or hwrng registration fails after the URB allocation, probe returns an error and the driver core does not call .remove(), leaking the URB. A failed URB setup was also allowed to continue probing with an unusable device. Check the URB setup result and add the missing probe-error unwind so the URB is freed before returning from later errors. Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> |
||
|
Alain Michaud
|
64ffa2e5e0 |
HID: logitech-hidpp: Add support for newer Bluetooth keyboards
Add product IDs (PIDs) for several newer Logitech Bluetooth keyboards to the hidpp_devices matching table, enabling full HID++ support for them. The added keyboards are: - Logitech Signature K650 & B2B - Logitech Pebble Keys 2 K380S - Logitech Casa Pop-Up Desk & B2B - Logitech Wave Keys & B2B - Logitech Signature Slim K950 & B2B - Logitech MX Keys S & B2B - Logitech Keys-To-Go 2 - Logitech Pop Icon Keys - Logitech MX Keys Mini & B2B - Logitech Signature Slim Solar+ K980 B2B - Logitech Bluetooth Keyboard K250/K251 - Logitech Signature Comfort K880 & B2B Signed-off-by: Alain Michaud <alainmichaud@google.com> Reviewed-by: Olivier Gay <ogay@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Tomasz Pakuła
|
48d1677779 |
HID: pidff: Fix integer overflow in pidff_rescale
Rescaling values close to the max (U16_MAX) temporarily creates values
that exceed the s32 range. This caused value overflow in case when, for
example, a periodic effect phase was higer than 180 degrees. In turn,
rescale function could return values outised of the logical range of the
HID field.
Fix by using 64 bit signed integer to store the value during calculation
but still return only 32 bit integer.
Closes: https://github.com/JacKeTUs/universal-pidff/issues/116
Fixes:
|
||
|
Xu Rao
|
a991aa5e89 |
HID: i2c-hid: add reset quirk for BLTP7853 touchpad
The BLTP7853 I2C HID touchpad may fail to probe after reboot or reprobe because reset completion is not signalled to the host. The driver then waits for the reset-complete interrupt until it times out and the device probe fails: i2c_hid i2c-BLTP7853:00: failed to reset device. i2c_hid i2c-BLTP7853:00: can't add hid device: -61 i2c_hid: probe of i2c-BLTP7853:00 failed with error -61 Add I2C_HID_QUIRK_NO_IRQ_AFTER_RESET for the device so i2c-hid does not wait for a reset interrupt that may never arrive. Signed-off-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Benjamin Tissoires
|
206342541f |
HID: core: introduce hid_safe_input_report()
hid_input_report() is used in too many places to have a commit that
doesn't cross subsystem borders. Instead of changing the API, introduce
a new one when things matters in the transport layers:
- usbhid
- i2chid
This effectively revert to the old behavior for those two transport
layers.
Fixes:
|
||
|
Benjamin Tissoires
|
2c85c61d13 |
HID: pass the buffer size to hid_report_raw_event
commit |
||
|
Myeonghun Pak
|
b08665fe80 |
HID: google: hammer: stop hardware on devres action failure
hammer_probe() starts the HID hardware before registering the devres action that stops it. If devm_add_action() fails, probe returns an error with the hardware still started because the cleanup action was never registered and the driver's remove callback is not called after a failed probe. Use devm_add_action_or_reset() so the stop action runs immediately on registration failure while preserving the existing devres-managed cleanup path for later probe failures and remove. Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Sangyun Kim
|
1654e53349 |
HID: appletb-kbd: run inactivity autodim from workqueues
The autodim code in hid-appletb-kbd takes backlight_device->ops_lock
via backlight_device_set_brightness() -> mutex_lock() from two
different atomic contexts:
* appletb_inactivity_timer() is a struct timer_list callback, so it
runs in softirq context. Every expiry triggers
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
Call Trace:
<IRQ>
__might_resched
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
* reset_inactivity_timer() is called from appletb_kbd_hid_event() and
appletb_kbd_inp_event(). On real USB hardware these run in
softirq/IRQ context (URB completion and input-event dispatch).
When the Touch Bar has already been dimmed or turned off, the
reset path calls backlight_device_set_brightness() directly to
restore brightness, producing the same warning.
Both call sites hit the same mutex_lock()-from-atomic bug. Fix them
together by moving the blocking work onto the system workqueue:
* Convert the inactivity timer from struct timer_list to
struct delayed_work; the callback (appletb_inactivity_work) now
runs in process context where mutex_lock() is legal.
* Add a dedicated struct work_struct restore_brightness_work and have
reset_inactivity_timer() schedule it instead of calling
backlight_device_set_brightness() directly.
Cancel both works synchronously during driver tear-down alongside the
existing backlight reference drop.
The semantics are unchanged (same delays, same state transitions on
dim, turn-off and user activity); only the execution context of the
sleeping call changes. The timer field and callback are renamed to
match their new type; reset_inactivity_timer() keeps its name because
it is invoked from input event paths that read naturally as "reset
the inactivity timer".
Fixes:
|
||
|
Sangyun Kim
|
4db2af9292 |
HID: appletb-kbd: fix UAF in inactivity-timer cleanup path
Commit |
||
|
T.J. Mercier
|
cac61b58a3 |
HID: playstation: Clamp num_touch_reports
A device would never lie about the number of touch reports would it?
If it does the loop in dualshock4_parse_report will read off the end of
the touch_reports array, up to about 2 KiB for the maximum number of 256
loop iteraions. The data that is read is emitted via evdev if the
DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by
clamping the num_touch_reports value provided by the device to the
maximum size of the touch_reports array.
Fixes:
|
||
|
Lee Jones
|
d93ba918a1 |
HID: magicmouse: Prevent out-of-bounds (OOB) read during DOUBLE_REPORT_ID
It is currently possible for a malicious or misconfigured USB device to cause an out-of-bounds (OOB) read when submitting reports using DOUBLE_REPORT_ID by specifying a large report length and providing a smaller one. Let's prevent that by comparing the specified report length with the actual size of the data read in from userspace. If the actual data length ends up being smaller than specified, we'll politely warn the user and prevent any further processing. Signed-off-by: Lee Jones <lee@kernel.org> Reviewed-by: Günther Noack <gnoack@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Florian Pradines
|
f097d24667 |
HID: mcp2221: fix OOB write in mcp2221_raw_event()
mcp2221_raw_event() copies device-supplied data into mcp->rxbuf at offset rxbuf_idx without checking that the copy fits within the destination buffer. A device responding with up to 60 bytes to a small I2C/SMBus read can overflow the buffer. Add a rxbuf_size field to struct mcp2221, set it alongside rxbuf in mcp_i2c_smbus_read(), and check rxbuf_idx + data[3] <= rxbuf_size before the memcpy. Reported-by: Benoît Sevens <bsevens@google.com> Signed-off-by: Florian Pradines <florian.pradines@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Lukas Bulwahn
|
5f90dcfa8d |
HID: quirks: really enable the intended work around for appledisplay
Commit |
||
|
Oliver Neukum
|
17ee873dba |
HID: hid-sjoy: race between init and usage
The driver uses an initial IO to set the device to a default
state. That initialization is currently being done after the device
node has been created. That means that the single buffer used
for output can be altered while IO is in progress.
Move the intialization before announcement to user space.
Fixes:
|
||
|
Takashi Iwai
|
4873592845 |
HID: uclogic: Fix regression of input name assignment
The previous fix for adding the devm_kasprintf() return check in the commit |
||
|
Dan Carpenter
|
ae4ac07733 |
HID: intel-thc-hid: Intel-quickspi: Fix some error codes
If we have a partial read that is supposed to be treated as failure but
in this code we forgot to set the error code. Return -EINVAL.
Fixes:
|
||
|
Matthew Schwartz
|
3524900cc5 |
HID: hid-lenovo-go-s: restore OS_TYPE after resume from s2idle
The controller MCU does not persist OS_TYPE across power cycles. During
s2idle resume, the USB device may be power-cycled, causing the OS_TYPE
setting to revert to the default Windows value.
Add a reset_resume callback so that this is correctly restored after
resume.
Fixes:
|
||
|
Damien Dejean
|
55ce185884 |
HID: elan: Add support for ELAN SB974D touchpad
Elan SB974D touchpad uses ELAN_MT_I2C format to send HID reports. Add an entry to match for the device and parse its vendor specific format. Signed-off-by: Damien Dejean <damiendejean@google.com> Signed-off-by: Kornel Dulęba <korneld@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Rosalie Wanders
|
12bd440b66 |
HID: sony: add missing size validation for Rock Band 3 Pro instruments
This commit adds the missing size validation for Rock Band 3 PS3 Pro instruments in sony_raw_event(), this prevents a malicious device from allowing hid-sony to read out of bounds of the provided buffer. Signed-off-by: Rosalie Wanders <rosalie@mailbox.org> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Rosalie Wanders
|
a4170b63ed |
HID: sony: add missing size validation for SMK-Link remotes
This commit adds the missing size validation for SMK-Link remotes in sony_raw_event(), this prevents a malicious device from allowing hid-sony to read out of bounds of the provided buffer. I do not own these devices so the size check only forces that the buffer is large enough for nsg_mrxu_parse_report(). Signed-off-by: Rosalie Wanders <rosalie@mailbox.org> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Rosalie Wanders
|
0f2b8466fb |
HID: sony: remove unneeded WARN_ON() in sony_leds_init()
This commit removes the unneeded WARN_ON() macro usage in sony_leds_init(), this is unneeded because the sony_leds_init() function call is already gated behind a SONY_LED_SUPPORT check in sony_input_configured() Signed-off-by: Rosalie Wanders <rosalie@mailbox.org> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Michael Zaidman
|
80c4bbb2b3 |
HID: ft260: validate i2c input report length
Add two checks to ft260_raw_event() to prevent out-of-bounds reads from malicious or malfunctioning devices: First, reject reports shorter than the 2-byte header (report ID + length fields). Without this, even accessing xfer->length on a 1-byte report is an OOB read. Second, validate xfer->length against the actual data capacity of the received HID report. Each I2C data report ID (0xD0 through 0xDE) defines a different report size in the HID descriptor, so the available payload varies per report. A corrupted length field could cause memcpy to read beyond the report buffer. Reported-by: Sebastián Josué Alba Vives <sebasjosue84@gmail.com> Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Rosalie Wanders
|
278dd04879 |
HID: sony: fix incorrect force-feedback check in sony_suspend()
This commit fixes the incorrect force-feedback check in sony_suspend(), without this the check will always be true due to checking a constant define that is never 0. Signed-off-by: Rosalie Wanders <rosalie@mailbox.org> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Linus Torvalds
|
d97e7d7c30 |
hid-for-linus-2026041601
-----BEGIN PGP SIGNATURE-----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=w455
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2026041601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
"Core:
- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)
Drivers:
- support for rumble effects in winwing driver (Ivan Gorinov)
- new support for a variety of Sony Rock Band and Sony DJ Hero
Turntable devices (Rosalie Wanders)
- new driver for Lenovo Legion Go / S devices (Derek J. Clark)
- power management improvements to intel-thc-hid driver (Even Xu)
... other assorted cleanups, fixes and device-specific quirks"
* tag 'hid-for-linus-2026041601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (73 commits)
HID: core: clamp report_size in s32ton() to avoid undefined shift
HID: logitech-dj: fix wrong detection of bad DJ_SHORT output report
HID: logitech-hidpp: fix race condition when accessing stale stack pointer
HID: winwing: Enable rumble effects
HID: core: do not allow parsing 0-sized reports
HID: usbhid: refactor endpoint lookup
HID: huawei: fix CD30 keyboard report descriptor issue
HID: playstation: validate num_touch_reports in DualShock 4 reports
HID: drop 'default !EXPERT' from tristate symbols
HID: usbhid: fix deadlock in hid_post_reset()
HID: apple: ensure the keyboard backlight is off if suspending
HID: quirks: Set ALWAYS_POLL for LOGITECH_BOLT_RECEIVER
HID: alps: fix NULL pointer dereference in alps_raw_event()
HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write
HID: logitech-dj: Standardise hid_report_enum variable nomenclature
HID: sony: update module description
HID: logitech-hidpp: Check bounds when deleting force-feedback effects
HID: sony: add battery status support for Rock Band 4 PS5 guitars
HID: sony: fix style issues
HID: quirks: update hid-sony supported devices
...
|
||
|
Linus Torvalds
|
87768582a4 |
dma-mapping updates for Linux 7.0:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and its
clients (Marek Szyprowski, shared branch with device-tree updates to
avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma utility
(Qinxin Xia)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaeCbdQAKCRCJp1EFxbsS
RHbWAQCt70dzrU0lu0omTR1HdDP4GTYfuM6nZR91e8/itGN1+QD/XH4I/0wuybzk
v5uxbIC6lR3abQRc3YNRXfi+i5j26A4=
=Oee2
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
|
||
|
Linus Torvalds
|
d662a710c6 |
dmaengine updates for v7.1
Core:
- New devm_of_dma_controller_register() API
New Support:
- Support for RZ/G3L SoC
- Loongson Multi-Channel DMA controller support
- Conversion of Xilinx AXI DMA binding
- DW AXI CV1800B DMA support
- Switchtec DMA engine driver
Updates:
- AMD MDB Endpoint and non-LL mode support
- DW edma virtual IRQ for interrupt-emulation, cyclic transfers support
-----BEGIN PGP SIGNATURE-----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=uoUT
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- New devm_of_dma_controller_register() API
New Support:
- Support for RZ/G3L SoC
- Loongson Multi-Channel DMA controller support
- Conversion of Xilinx AXI DMA binding
- DW AXI CV1800B DMA support
- Switchtec DMA engine driver
Updates:
- AMD MDB Endpoint and non-LL mode support
- DW edma virtual IRQ for interrupt-emulation, cyclic transfers support"
* tag 'dmaengine-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (65 commits)
dmaengine: dw-edma: Add non-LL mode
dmaengine: dw-edma: Add AMD MDB Endpoint Support
dt-bindings: dmaengine: Fix spelling mistake "Looongson" -> "Looogson"
dmaengine: loongson: Fix spelling mistake "Looongson" -> "Looogson"
dmaengine: loongson: New driver for the Loongson Multi-Channel DMA controller
dt-bindings: dmaengine: Add Loongson Multi-Channel DMA controller
dmaengine: loongson: loongson2-apb: Simplify locking with guard() and scoped_guard()
dmaengine: loongson: loongson2-apb: Convert to devm_clk_get_enabled()
dmaengine: loongson: loongson2-apb: Convert to dmaenginem_async_device_register()
dmaengine: loongson: New directory for Loongson DMA controllers drivers
dt-bindings: dma: xlnx,axi-dma: Convert to DT schema
dt-bindings: dma: rz-dmac: Add conditional schema for RZ/G3L
dmaengine: sh: rz-dmac: Add device_{pause,resume}() callbacks
dmaengine: sh: rz-dmac: Add device_tx_status() callback
dmaengine: sh: rz-dmac: Use rz_lmdesc_setup() to invalidate descriptors
dmaengine: sh: rz-dmac: Drop unnecessary local_irq_save() call
dmaengine: sh: rz-dmac: Drop goto instruction and label
dmaengine: sh: rz-dmac: Drop read of CHCTRL register
dmaengine: sh: rz_dmac: add RZ/{T2H,N2H} support
dt-bindings: dma: renesas,rz-dmac: document RZ/{T2H,N2H}
...
|
||
|
Linus Torvalds
|
3f887edd35 |
phy-for-7.1
- New Support - Qualcomm Eliza QMP UFS PHY - Canaan K230 USB 2.0 PHY driver - Mediatek mt8167 dsi-phy - Eswin EIC7700 SATA PHY driver - Updates - Sorted subsytem Makefile/Kconfig and some kernel-doc udpates -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmnh4msACgkQfBQHDyUj g0ctew/+K/rVLCUu/UgbvnV1hPH3q/OCytwcymurSp5+lZ2TGsHcwjzGNKrGxCAp nxgzffHwukyuRGq/FHDc1QQa+i5bDzf6dlE3CuZYnZWka8mxbqcBetMQvLb93LXL 9MEQ8YQgjh96AyX87sP0r5IhBVLl3LiGHj2+L6VXoTzMsJeqT6Kx2rABHgFjXM97 gjurp1PbHwi2EGQowa9zjsoQnRnN2C4O2xlZsXeNljzS2KPpToQ+sjADwHSau8nw b9idowJlJMlN+RFrNKJWgja7ro/E17IGQptJT9Hz89j2dXg0QiWIY/uok25o6XAn h0yYWpXP6gaQH1mnpS5Meb8d+ljTL4SNLv/64pYSGPzqXUbuJXVx2Rn7ZBuB3R/H +pmVbrdWSUwhXcgXDyVCMLguhCxns4M/SmaYrjVayrogDiz9gqHlGMTfsSmYCnbI UDqHyFSa6HRZIFnba0pBkb3eyrKE9qMK0FFgQURQp8GCOJu8waeNyCZ4fTCjXo6v MULhauFWDC267LNogt6KGgTC6sFmsitsI8jymMQGfb3g6FdhJUFpQLmNvwYpoHXH AofeTHrzdXWRVNiVKO01J2tPskVCczx5R5q5dfDGTM0mIRXMaHCuzT2RNdRmBpNk rgBlCvIiiE9VbusN+zybPQfTJAQa2eVMTvBRzjwkdLUYeMUJS0I= =qz0Z -----END PGP SIGNATURE----- Merge tag 'phy-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New Support: - Qualcomm Eliza QMP UFS PHY - Canaan K230 USB 2.0 PHY driver - Mediatek mt8167 dsi-phy - Eswin EIC7700 SATA PHY driver Updates: - Sorted subsytem Makefile/Kconfig and some kernel-doc udpates" * tag 'phy-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the Eliza QMP UFS PHY phy: qcom: m31-eusb2: clear PLL_EN during init phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY phy: apple: apple: Use local variable for ioremap return value phy: qcom: qmp-usbc: Simplify check for non-NULL pointer phy: marvell: mmp3-hsic: Avoid re-casting __iomem phy: apple: atc: Make atcphy_dwc3_reset_ops variable static dt-bindings: phy: mediatek,dsi-phy: Add support for mt8167 phy: usb: Add driver for Canaan K230 USB 2.0 PHY dt-bindings: phy: Add Canaan K230 USB PHY phy: phy-mtk-tphy: Update names and format of kernel-doc comments phy: Sort the subsystem Kconfig phy: Sort the subsystem Makefile phy: move spacemit pcie driver to its subfolder |
||
|
Linus Torvalds
|
65bec0c4ea |
soundwire updates for 7.1
- Core: DP prepare polling for avoiding interrupt deadlock - AMD clock init and bandwidth refactoring - Intel more codecs to wake list, clear message on before signaling waiting thread -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmnh3twACgkQfBQHDyUj g0eZwhAApdSFRhk43yNAMWr33Vxb+IFjRylNaJb6h5IWS7+0Z3yfq6zOuM3tW7Yh C9804L0RkncHwq6th0T5pi3neAwm/dVi1zmnzXiAe5Kgzl/Eru4ZNMh59VD8aNwQ K/emES6AJR6ulezYHNDE5Y74kjQHzMQUWiUo1DoAapoqr+WnZvfK+ZYAYh7I/ctY FxzBxx13yIHInDHsl3WQ+r1CSinDEe3RiQHW5+5DWdmmw8LfHLGUBBFIJQcVxRN/ 8NlNYr1wvRxUij11cZMPc3TetPfSsIGFpa7eOKezX1P9GxwY7qWvPvPmO0kzgLvH AsbFXOHZKYbtPy87agF1QdGq0Seym9x6OhNFucXs1yXIk1t/isv9bOrrOOmnSbR2 U3ycbMCUmJEUKhd7MWPWRaFUCEM2j/CRugFwpIbeE7AgJ5hZIUXlfWykDdlFxDTM e9IQ1jMTSnwyXs705FLLF3hxjIIAWS1kHIgEPWrxuSkAD9/Xx6sbD2fca7Ca6qrm W90TlprDAj/KiisEvje0tjEfZ8fTUanLC67d2sbxtrpzwpus4u8GzD62RAgsLlYP y9qGeAE1I5FMtJB83dewiYPCIofoez4DizM5wemojI+TtmvZwEWYfeXievD3ibad xN3uXtX6fqZ6BWUVIaxjdhSEB2FYdaZjTWPSmcUIwKlApOso0dY= =0cvn -----END PGP SIGNATURE----- Merge tag 'soundwire-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - Core: DP prepare polling for avoiding interrupt deadlock - AMD clock init and bandwidth refactoring - Intel more codecs to wake list, clear message on before signaling waiting thread * tag 'soundwire-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel_auxdevice: Add cs42l49 to wake_capable_list soundwire: cadence: Clear message complete before signaling waiting thread soundwire: Intel: test bus.bpt_stream before assigning it soundwire: bus: demote UNATTACHED state warnings to dev_dbg() soundwire: stream: Poll for DP prepare to avoid interrupt deadlock soundwire: amd: refactor bandwidth calculation logic soundwire: amd: add clock init control function soundwire: intel_auxdevice: Add CS47L47 to wake_capable_list soundwire: slave: Don't register devices that are disabled in ACPI soundwire: sdw.h: repair names and format of kernel-doc comments |
||
|
Linus Torvalds
|
0b6bc3dbe6 |
tracing latency updates for 7.1:
- Add TIMERLAT_ALIGN osnoise option Add a timer alignment option for timerlat that makes it work like the cyclictest -A option. timelat creates threads to test the latency of the kernel. The alignment option will have these threads trigger at the alignment offsets from each other. Instead of having each thread wake up at the exact same time, if the alignment is set to "20" each thread will wake up at 20 microseconds from the previous one. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeIBaBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qqM8AQCyz4uL1lCLQtJb5thG8V9QFRkYh5F3 +DyuRNoht3ijyAD+K4nZPAu4F09feWuHkssONtSZECKEuN6EhiHE4XX6Pgc= =WYYW -----END PGP SIGNATURE----- Merge tag 'trace-latency-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing latency update from Steven Rostedt: - Add TIMERLAT_ALIGN osnoise option Add a timer alignment option for timerlat that makes it work like the cyclictest -A option. timelat creates threads to test the latency of the kernel. The alignment option will have these threads trigger at the alignment offsets from each other. Instead of having each thread wake up at the exact same time, if the alignment is set to "20" each thread will wake up at 20 microseconds from the previous one. * tag 'trace-latency-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/osnoise: Add option to align tlat threads |
||
|
Linus Torvalds
|
cb30bf881c |
tracing updates for v7.1:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during the
compile. Move the __printf() attribute around for when debugging is not
enabled the warning will go away.
- Remove redundant check for EVENT_FILE_FL_FREED in event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded.
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now with
eventfs, the READ_ONCE() isn't needed. Simplify the code a bit and also
add a warning to event_file_data() if the file or its data is not present.
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper functions,
which do not use file->private_data. Stop updating it on open.
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum, show the
name of the enum instead of its number.
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution will
just skip over it. When tracing is enabled, the nop is converted to a
direct jump to the tracepoint code. Sometimes more calculations are
required to be performed to update the parameters of the tracepoint. In
this case, trace_##name##_enabled() is called which is a static_branch()
that gets enabled only when the tracepoint is enabled. This allows the
extra calculations to also be skipped by the nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem with
this approach is that there's now two static_branch() calls. One for
checking if the tracepoint is enabled, and then again to know if the
tracepoint should be called. The second one is redundant.
Introduce trace_call__foo() that will call the foo() tracepoint directly
without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code out of
it and into a new trace_snapshot.c file.
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is now a
__cpumask() field definition. Update the field to use that.
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat().
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled respectively.
But on error, after the "reg" func is called and the tracepoint is not
enabled, the "unreg" function is not called to tear down what the "reg"
function performed.
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output.
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location.
- Some other simple cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeCpvxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qt2WAP44m85BbAjBqJe4WR103eOXV+bREBta
dRoReKJOMe519gEAp0rK/HoCvHgHhIGe3gaGdIsNhnaxoFyNWMG/wokoLAY=
=Hg6+
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
|
||
|
Linus Torvalds
|
c9e03d5948 |
Probes updates for v7.1
- fprobe: do not zero out unused fgraph_data. This removes unneeded memset of fgraph_data in fprobe entry handler. -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmnhhjEbHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bfBMH/21EM4dL2oDrsR3Ud7G+ R1LYB959jkztJlIKQ9xGBdUpyMd97JYszknpTG4QHb7XW4FrcvZMiHeT9AW6ZBzw zJkWVbSCst7sNYpjmqFcf/p3uUJp3/jHNG6byQ2/oWW9bilWPitY1LDL8u/VwzWN ZN35B09bw2IgKXbxCNoNlASdV8w/nnVI+CEjKSbLJBVQffBzU9losLt5Qu1i5w/A Q5O5ZLkeawQhRzilxVAqae7U949MzRvn28EiLyMJ4rJA0vWH+ijg7vFYmC4hnFde GNzJ7q7S87BmApTsSVT+QBCpIGd2XjLYfiYZBBoZIZE2wXI4fxgF+cd05XE51hrG mTs= =ycSD -----END PGP SIGNATURE----- Merge tag 'probes-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull fprobe update from Masami Hiramatsu: - do not zero out unused fgraph_data. This removes unneeded memset of fgraph_data in fprobe entry handler. * tag 'probes-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: fprobe: do not zero out unused fgraph_data |
||
|
Linus Torvalds
|
829000f789 |
Bootconfig for v7.1:
- bootconfig: Minor fixes for handling errors, which includes
the following commits:
. fix off-by-one in xbc_verify_tree() next node check
. increment xbc_node_num after node init succeeds
. validate child node index in xbc_verify_tree()
- bootconfig: Code cleanups (mainly type/attribute changes), which
includes the following commits.
. clean up comment typos and bracing
. drop redundant memset of xbc_nodes
. replace linux/kernel.h with specific includes
. narrow flag parameter type from uint32_t to uint16_t
. constify xbc_calc_checksum() data parameter
. fix signed comparison in xbc_node_get_data()
. use size_t for strlen result in xbc_node_match_prefix()
. use signed type for offset in xbc_init_node()
. use size_t for key length tracking in xbc_verify_tree()
. change xbc_node_index() return type to uint16_t
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmncYnAbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bYZoH/2/lHKTucvTYAcyz039Z
73l8IPz8aIQPTLaqrQ0JBVRD0FnT0lZZRla+p4mZFMFu+gek5kd6y2wj5seEkgR1
tKhdY3YNP5c0NNpN5fsft4hCO9rShEdS0B3NsIiZ62onFAAKOgDd9ON2CQw4LlkJ
cv3Y3Ax0y0EYDNqh+OuV2sDkEv74sR7NpekxnC+RBi/v+cF8q5uSHusnRYs6PQng
zRnjluKT0Ahfmzi80WRinSfj+wNcCMoDKngxwNu+VZ14w8lGfYV4G318QCNH24IB
+8bb3Uu/LZ47kxbcCdW5yYzC2KgJbnhp7HWhyw7bPx8ANoRHM8VlFU9qJzODI7JN
eLw=
=1AAh
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
"Minor fixes for handling errors:
- fix off-by-one in xbc_verify_tree() next node check
- increment xbc_node_num after node init succeeds
- validate child node index in xbc_verify_tree()
Code cleanups (mainly type/attribute changes):
- clean up comment typos and bracing
- drop redundant memset of xbc_nodes
- replace linux/kernel.h with specific includes
- narrow flag parameter type from uint32_t to uint16_t
- constify xbc_calc_checksum() data parameter
- fix signed comparison in xbc_node_get_data()
- use size_t for strlen result in xbc_node_match_prefix()
- use signed type for offset in xbc_init_node()
- use size_t for key length tracking in xbc_verify_tree()
- change xbc_node_index() return type to uint16_t"
* tag 'bootconfig-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
lib/bootconfig: change xbc_node_index() return type to uint16_t
lib/bootconfig: use size_t for key length tracking in xbc_verify_tree()
lib/bootconfig: use signed type for offset in xbc_init_node()
lib/bootconfig: use size_t for strlen result in xbc_node_match_prefix()
lib/bootconfig: fix signed comparison in xbc_node_get_data()
lib/bootconfig: validate child node index in xbc_verify_tree()
lib/bootconfig: replace linux/kernel.h with specific includes
bootconfig: constify xbc_calc_checksum() data parameter
lib/bootconfig: drop redundant memset of xbc_nodes
lib/bootconfig: increment xbc_node_num after node init succeeds
lib/bootconfig: fix off-by-one in xbc_verify_tree() next node check
lib/bootconfig: narrow flag parameter type from uint32_t to uint16_t
lib/bootconfig: clean up comment typos and bracing
|
||
|
Linus Torvalds
|
d730905bc3 |
Support for Mobileye EyeQ6Lplus
Cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmniNBwaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHB2QA//U53JZYmmOxKxwbYwLvK9 Z8MuVgkvA/v7WktwL2PoMO0AlhQsteM5VtupddHhuhUiIr7gPy6Z7pEE9sDqM3gj p1d6vrg5XiWlh1fURdSqvzufKsm/etpElbvc2JjkcqD0sMGJUwlkP3ncZk/DCus6 zhcvya7jVxyvzbCBgJSM8QHvOoj/g3EV4hsx8Ymru8XSdLVEegodZtvUHVx4Q29U fmHCf1u/v+rJVbe2T3nuqsqzQhmaWkC+WyeVJIDUNecjclPoGNOeg8duICNfOu9q dtkzOua7v6rRsUA9GDbMcR44PWzL4LqGTOffzwF7uvYakOAp6nQWsymAUIfkQbE6 +I8heGaYPEQLjSHgCPI2WdJ4urbPdgsd5W2pC8s6WaHPdRlSMapH16I0DxmmNZlV CzW7o2ore5b8H4Mu5mboMjFzMY+A/0zC5S7twOpX+mvgPz+MTf1g0vD3hCSL+N7c LSW7rSZyd2smcgaHJBDpHceRHNZbVqloeO007DiJtrx+IWTBhvhFt2q/aqGG51xM 2P/lRZrA8vAMaTR1hZKLmxUPZpSekezoWC8GbWNeIg5NUUTOJoTAtQvT5vU40GZA 22o3s1a6rgz5KngV9rMWYERSV2yflvloYVo0ASVqgy1ijzzlsin/fbO976GdGD2I 7vrch6tajmTSBYeG0SuKiFY= =jKsJ -----END PGP SIGNATURE----- Merge tag 'mips_7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - Support for Mobileye EyeQ6Lplus - Cleanups and fixes * tag 'mips_7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) MIPS/mtd: Handle READY GPIO in generic NAND platform data MIPS/input: Move RB532 button to GPIO descriptors MIPS: validate DT bootargs before appending them MIPS: Alchemy: Remove unused forward declaration MAINTAINERS: Mobileye: Add EyeQ6Lplus files MIPS: config: add eyeq6lplus_defconfig MIPS: Add Mobileye EyeQ6Lplus evaluation board dts MIPS: Add Mobileye EyeQ6Lplus SoC dtsi clk: eyeq: Add Mobileye EyeQ6Lplus OLB clk: eyeq: Adjust PLL accuracy computation clk: eyeq: Skip post-divisor when computing PLL frequency pinctrl: eyeq5: Add Mobileye EyeQ6Lplus OLB pinctrl: eyeq5: Use match data reset: eyeq: Add Mobileye EyeQ6Lplus OLB MIPS: Add Mobileye EyeQ6Lplus support dt-bindings: soc: mobileye: Add EyeQ6Lplus OLB dt-bindings: mips: Add Mobileye EyeQ6Lplus SoC MIPS: dts: loongson64g-package: Switch to Loongson UART driver mips: pci-mt7620: rework initialization procedure mips: pci-mt7620: add more register init values ... |
||
|
Linus Torvalds
|
a10e80be63 |
alpha updates for v7.1
- alpha: Define pgprot_modify to silence tautological comparison warnings - alpha: add support for SECCOMP and SECCOMP_FILTER -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTIw07U9ivnHy+tugnaDr6nZQzE/AUCaeEX/gAKCRDaDr6nZQzE /FjpAPwMQssCV12H9JczlcTxcqUoBVCTDczxOEUxLwdhXA5UKQEAu/cxICAyaul7 6gNqwffhpOWpehGa8T8BNZeJr5wJ+Ag= =g5Lf -----END PGP SIGNATURE----- Merge tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha Pull alpha updates from Magnus Lindholm: "One fix to silence pgprot_modify() compiler warnings, and one patch adding SECCOMP/SECCOMP_FILTER support together with the syscall and ptrace fixes needed for it" * tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha: alpha: Define pgprot_modify to silence tautological comparison warnings alpha: add support for SECCOMP and SECCOMP_FILTER |
||
|
Linus Torvalds
|
01f492e181 |
Arm:
- Add support for tracing in the standalone EL2 hypervisor code, which should help both debugging and performance analysis. This uses the new infrastructure for 'remote' trace buffers that can be exposed by non-kernel entities such as firmware, and which came through the tracing tree. - Add support for GICv5 Per Processor Interrupts (PPIs), as the starting point for supporting the new GIC architecture in KVM. - Finally add support for pKVM protected guests, where pages are unmapped from the host as they are faulted into the guest and can be shared back from the guest using pKVM hypercalls. Protected guests are created using a new machine type identifier. As the elusive guestmem has not yet delivered on its promises, anonymous memory is also supported. This is only a first step towards full isolation from the host; for example, the CPU register state and DMA accesses are not yet isolated. Because this does not really yet bring fully what it promises, it is hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is created. Caveat emptor. - Rework the dreaded user_mem_abort() function to make it more maintainable, reducing the amount of state being exposed to the various helpers and rendering a substantial amount of state immutable. - Expand the Stage-2 page table dumper to support NV shadow page tables on a per-VM basis. - Tidy up the pKVM PSCI proxy code to be slightly less hard to follow. - Fix both SPE and TRBE in non-VHE configurations so that they do not generate spurious, out of context table walks that ultimately lead to very bad HW lockups. - A small set of patches fixing the Stage-2 MMU freeing in error cases. - Tighten-up accepted SMC immediate value to be only #0 for host SMCCC calls. - The usual cleanups and other selftest churn. LoongArch: - Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel(). - Add DMSINTC irqchip in kernel support. RISC-V: - Fix steal time shared memory alignment checks - Fix vector context allocation leak - Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi() - Fix double-free of sdata in kvm_pmu_clear_snapshot_area() - Fix integer overflow in kvm_pmu_validate_counter_mask() - Fix shift-out-of-bounds in make_xfence_request() - Fix lost write protection on huge pages during dirty logging - Split huge pages during fault handling for dirty logging - Skip CSR restore if VCPU is reloaded on the same core - Implement kvm_arch_has_default_irqchip() for KVM selftests - Factored-out ISA checks into separate sources - Added hideleg to struct kvm_vcpu_config - Factored-out VCPU config into separate sources - Support configuration of per-VM HGATP mode from KVM user space s390: - Support for ESA (31-bit) guests inside nested hypervisors. - Remove restriction on memslot alignment, which is not needed anymore with the new gmap code. - Fix LPSW/E to update the bear (which of course is the breaking event address register). x86: - Shut up various UBSAN warnings on reading module parameter before they were initialized. - Don't zero-allocate page tables that are used for splitting hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and thus write all bytes. - As an optimization, bail early when trying to unsync 4KiB mappings if the target gfn can just be mapped with a 2MiB hugepage. x86 generic: - Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM would dereference stack pointer after an exit to userspace. - Clean up and comment the emulated MMIO code to try to make it easier to maintain (not necessarily "easy", but "easier"). - Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX and SVM enabling) as it is needed for trusted I/O. - Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions - Immediately fail the build if a required #define is missing in one of KVM's headers that is included multiple times. - Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected exception, mostly to prevent syzkaller from abusing the uAPI to trigger WARNs, but also because it can help prevent userspace from unintentionally crashing the VM. - Exempt SMM from CPUID faulting on Intel, as per the spec. - Misc hardening and cleanup changes. x86 (AMD): - Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple vCPUs have to-be-injected IRQs. - Clean up and optimize the OSVW handling, avoiding a bug in which KVM would overwrite state when enabling virtualization on multiple CPUs in parallel. This should not be a problem because OSVW should usually be the same for all CPUs. - Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a "too large" size based purely on user input. - Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION. - Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as doing so for an SNP guest will crash the host due to an RMP violation page fault. - Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries are required to hold kvm->lock, and enforce it by lockdep. Fix various bugs where sev_guest() was not ensured to be stable for the whole duration of a function or ioctl. - Convert a pile of kvm->lock SEV code to guard(). - Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6 as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2 rather than CR2, for example). Only set CR2 and DR6 when consumption of the payload is imminent, but on the other hand force delivery of the payload in all paths where userspace retrieves CR2 or DR6. - Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead of vmcb02->save.cr2. The value is out of sync after a save/restore or after a #PF is injected into L2. - Fix a class of nSVM bugs where some fields written by the CPU are not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not up-to-date when saved by KVM_GET_NESTED_STATE. - Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after save+restore. - Add a variety of missing nSVM consistency checks. - Fix several bugs where KVM failed to correctly update VMCB fields on nested #VMEXIT. - Fix several bugs where KVM failed to correctly synthesize #UD or #GP for SVM-related instructions. - Add support for save+restore of virtualized LBRs (on SVM). - Refactor various helpers and macros to improve clarity and (hopefully) make the code easier to maintain. - Aggressively sanitize fields when copying from vmcb12, to guard against unintentionally allowing L1 to utilize yet-to-be-defined features. - Fix several bugs where KVM botched rAX legality checks when emulating SVM instructions. There are remaining issues in that KVM doesn't handle size prefix overrides for 64-bit guests. - Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's architectural but sketchy behavior of generating #GP for "unsupported" addresses). - Cache all used vmcb12 fields to further harden against TOCTOU bugs. x86 (Intel): - Drop obsolete branch hint prefixes from the VMX instruction macros. - Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a register input when appropriate. - Code cleanups. guest_memfd: - Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support reclaim, the memory is unevictable, and there is no storage to write back to. LoongArch selftests: - Add KVM PMU test cases s390 selftests: - Enable more memory selftests. x86 selftests: - Add support for Hygon CPUs in KVM selftests. - Fix a bug in the MSR test where it would get false failures on AMD/Hygon CPUs with exactly one of RDPID or RDTSCP. - Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a bug where the kernel would attempt to collapse guest_memfd folios against KVM's will. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnftRQUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroPAzwf+NKO4Ktv+7A22ImN0SBl0nlUuulsz vTcw3+hxdRoIw83GdNS+hG5js0wrpMDnbv3t4+VliDNBSSxrBzcSWX2wpilW0Xtw qGo1MWhs2lKPy1NlaRVOwPS6j7uF3AR0TQ1iQLGMedQuCU9WpiKJxyhNXJdbLrt3 8EgFzsvtEsv+jKNRUNDf9+d0j4gZsFyIe+Brhianbw+u3/UCiUClLCdsKPc4+5ZX 08otYXytacGNIf/5Ev1vT4pHkHL0yqKXAtX7LEtaS3+0KrPuLjV4slemivzE9vf5 Evafm5AhA4wpaNMb1ZerhY3T94lsMaJpWxotjR//0Q7C9B59pCQnXCm8mg== =CcE0 -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "Arm: - Add support for tracing in the standalone EL2 hypervisor code, which should help both debugging and performance analysis. This uses the new infrastructure for 'remote' trace buffers that can be exposed by non-kernel entities such as firmware, and which came through the tracing tree - Add support for GICv5 Per Processor Interrupts (PPIs), as the starting point for supporting the new GIC architecture in KVM - Finally add support for pKVM protected guests, where pages are unmapped from the host as they are faulted into the guest and can be shared back from the guest using pKVM hypercalls. Protected guests are created using a new machine type identifier. As the elusive guestmem has not yet delivered on its promises, anonymous memory is also supported This is only a first step towards full isolation from the host; for example, the CPU register state and DMA accesses are not yet isolated. Because this does not really yet bring fully what it promises, it is hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is created. Caveat emptor - Rework the dreaded user_mem_abort() function to make it more maintainable, reducing the amount of state being exposed to the various helpers and rendering a substantial amount of state immutable - Expand the Stage-2 page table dumper to support NV shadow page tables on a per-VM basis - Tidy up the pKVM PSCI proxy code to be slightly less hard to follow - Fix both SPE and TRBE in non-VHE configurations so that they do not generate spurious, out of context table walks that ultimately lead to very bad HW lockups - A small set of patches fixing the Stage-2 MMU freeing in error cases - Tighten-up accepted SMC immediate value to be only #0 for host SMCCC calls - The usual cleanups and other selftest churn LoongArch: - Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel() - Add DMSINTC irqchip in kernel support RISC-V: - Fix steal time shared memory alignment checks - Fix vector context allocation leak - Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi() - Fix double-free of sdata in kvm_pmu_clear_snapshot_area() - Fix integer overflow in kvm_pmu_validate_counter_mask() - Fix shift-out-of-bounds in make_xfence_request() - Fix lost write protection on huge pages during dirty logging - Split huge pages during fault handling for dirty logging - Skip CSR restore if VCPU is reloaded on the same core - Implement kvm_arch_has_default_irqchip() for KVM selftests - Factored-out ISA checks into separate sources - Added hideleg to struct kvm_vcpu_config - Factored-out VCPU config into separate sources - Support configuration of per-VM HGATP mode from KVM user space s390: - Support for ESA (31-bit) guests inside nested hypervisors - Remove restriction on memslot alignment, which is not needed anymore with the new gmap code - Fix LPSW/E to update the bear (which of course is the breaking event address register) x86: - Shut up various UBSAN warnings on reading module parameter before they were initialized - Don't zero-allocate page tables that are used for splitting hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and thus write all bytes - As an optimization, bail early when trying to unsync 4KiB mappings if the target gfn can just be mapped with a 2MiB hugepage x86 generic: - Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM would dereference stack pointer after an exit to userspace - Clean up and comment the emulated MMIO code to try to make it easier to maintain (not necessarily "easy", but "easier") - Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX and SVM enabling) as it is needed for trusted I/O - Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions - Immediately fail the build if a required #define is missing in one of KVM's headers that is included multiple times - Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected exception, mostly to prevent syzkaller from abusing the uAPI to trigger WARNs, but also because it can help prevent userspace from unintentionally crashing the VM - Exempt SMM from CPUID faulting on Intel, as per the spec - Misc hardening and cleanup changes x86 (AMD): - Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple vCPUs have to-be-injected IRQs - Clean up and optimize the OSVW handling, avoiding a bug in which KVM would overwrite state when enabling virtualization on multiple CPUs in parallel. This should not be a problem because OSVW should usually be the same for all CPUs - Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a "too large" size based purely on user input - Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION - Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as doing so for an SNP guest will crash the host due to an RMP violation page fault - Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries are required to hold kvm->lock, and enforce it by lockdep. Fix various bugs where sev_guest() was not ensured to be stable for the whole duration of a function or ioctl - Convert a pile of kvm->lock SEV code to guard() - Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6 as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2 rather than CR2, for example). Only set CR2 and DR6 when consumption of the payload is imminent, but on the other hand force delivery of the payload in all paths where userspace retrieves CR2 or DR6 - Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead of vmcb02->save.cr2. The value is out of sync after a save/restore or after a #PF is injected into L2 - Fix a class of nSVM bugs where some fields written by the CPU are not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not up-to-date when saved by KVM_GET_NESTED_STATE - Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after save+restore - Add a variety of missing nSVM consistency checks - Fix several bugs where KVM failed to correctly update VMCB fields on nested #VMEXIT - Fix several bugs where KVM failed to correctly synthesize #UD or #GP for SVM-related instructions - Add support for save+restore of virtualized LBRs (on SVM) - Refactor various helpers and macros to improve clarity and (hopefully) make the code easier to maintain - Aggressively sanitize fields when copying from vmcb12, to guard against unintentionally allowing L1 to utilize yet-to-be-defined features - Fix several bugs where KVM botched rAX legality checks when emulating SVM instructions. There are remaining issues in that KVM doesn't handle size prefix overrides for 64-bit guests - Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's architectural but sketchy behavior of generating #GP for "unsupported" addresses) - Cache all used vmcb12 fields to further harden against TOCTOU bugs x86 (Intel): - Drop obsolete branch hint prefixes from the VMX instruction macros - Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a register input when appropriate - Code cleanups guest_memfd: - Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support reclaim, the memory is unevictable, and there is no storage to write back to LoongArch selftests: - Add KVM PMU test cases s390 selftests: - Enable more memory selftests x86 selftests: - Add support for Hygon CPUs in KVM selftests - Fix a bug in the MSR test where it would get false failures on AMD/Hygon CPUs with exactly one of RDPID or RDTSCP - Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a bug where the kernel would attempt to collapse guest_memfd folios against KVM's will" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits) KVM: x86: use inlines instead of macros for is_sev_*guest x86/virt: Treat SVM as unsupported when running as an SEV+ guest KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper KVM: SEV: use mutex guard in snp_handle_guest_req() KVM: SEV: use mutex guard in sev_mem_enc_unregister_region() KVM: SEV: use mutex guard in sev_mem_enc_ioctl() KVM: SEV: use mutex guard in snp_launch_update() KVM: SEV: Assert that kvm->lock is held when querying SEV+ support KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe" KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y KVM: SEV: WARN on unhandled VM type when initializing VM KVM: LoongArch: selftests: Add PMU overflow interrupt test KVM: LoongArch: selftests: Add basic PMU event counting test KVM: LoongArch: selftests: Add cpucfg read/write helpers LoongArch: KVM: Add DMSINTC inject msi to vCPU LoongArch: KVM: Add DMSINTC device support LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch ... |
||
|
Borislav Petkov (AMD)
|
e55d98e775 |
x86/CPU: Fix FPDSS on Zen1
Zen1's hardware divider can leave, under certain circumstances, partial results from previous operations. Those results can be leaked by another, attacker thread. Fix that with a chicken bit. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
43cfbdda5a |
iommufd v7.1 merge window pull request
Several fixes:
- Add missing static const
- Correct type 1 emulation for VFIO_CHECK_EXTENSION when no-iommu is
turned on
- Fix selftest memory leak and syzkaller splat
- Fix missed -EFAULT in fault reporting write() fops
- Fix a race where map/unmap with the internal IOVA allocator can unmap
things it should not
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeECkwAKCRCFwuHvBreF
YT5LAQD2DWHgrrgiv3z0X3J+ymvMPIw32hI2J7rAbrR+olAvigEA5adGbQAUI6cC
msu5z8gv6bK1bzcqPbkL8hPlNU0naQQ=
=fe0o
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several fixes:
- Add missing static const
- Correct type 1 emulation for VFIO_CHECK_EXTENSION when no-iommu is
turned on
- Fix selftest memory leak and syzkaller splat
- Fix missed -EFAULT in fault reporting write() fops
- Fix a race where map/unmap with the internal IOVA allocator can
unmap things it should not"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix a race with concurrent allocation and unmap
iommufd/selftest: Remove MOCK_IOMMUPT_AMDV1 format
iommufd: Fix return value of iommufd_fault_fops_write()
iommufd: update outdated comment for renamed iommufd_hw_pagetable_alloc()
iommufd/selftest: Fix page leaks in mock_viommu_{init,destroy}
iommufd: vfio compatibility extension check for noiommu mode
iommufd: Constify struct dma_buf_attach_ops
|
||
|
Linus Torvalds
|
87fe97a184 |
fwctl 7.1 merge window pull request
- New fwctl driver for Broadcom RDMA NICs - Bug fix for non-modular builds -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeDp6gAKCRCFwuHvBreF YXiBAQCUW1N0n7iTqlkbdbCs3GsI0d78x2dDN7aEc7SKDr/+CgEA69TVKDTLkIJa CAzwZLkAKjRDUH7PXh65i8svJnwvzAk= =MoNI -----END PGP SIGNATURE----- Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl Pull fwctl updates from Jason Gunthorpe: - New fwctl driver for Broadcom RDMA NICs - Bug fix for non-modular builds * tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl: fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal fwctl/bnxt_fwctl: Add documentation entries fwctl/bnxt_fwctl: Add bnxt fwctl device fwctl/bnxt_en: Create an aux device for fwctl fwctl/bnxt_en: Refactor aux bus functions to be more generic fwctl/bnxt_en: Move common definitions to include/linux/bnxt/ |
||
|
Linus Torvalds
|
8242c709d4 |
soc: ARM code changes for 7.1
These are again very minimal updates: - A workaround for firmware on Google Nexus 10 - A fix for early debugging on OMAP1 - A rework for Microchip SoC configuration - Cleanups on OMAP2 an R-Car-Gen2 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnhCkAACgkQmmx57+YA GNlmlxAAgvOCI5Knxv0K0IyUTCknVY1kE6a/JasD6ib+4gVhSa1XDVSAzEWkkS5v 8UoZtXQ/fvxx3PakgVuIe7BKRk1y9N2Msj3n2dlGBKCsvIXxNaZayyODWVnkJUmR anmyy4Y7jPtCi1uSOj9heA9VzMBu54sEJH0Ay7p6nykBPyD08Oo2hljbZyIjABTG FuAPksB345a2go5eb0MoAKQGHtrNjzXD1LXkcKammSxqEgcEocQa3DqLCCRNqLJu cfA8OmoOgtDoK9jbTh3sOmstM2LWCPBlBAnu56c1m5oEQr5IjrcCqKskMtyl47R9 kNzIWISgBkj5pfl/zTIy/qD3msd8OssIe2ZAUSChZ5ceSi8aC4B+ISC+E8g8nm1j 6wTAkeDK0iQVndPgoKwPSjyngsK+yAT6SMzZDGY9dODe9I35Mq1F5m32FuU3C3m/ r/BLl7ixcUPo3mVK1eZCoNdHhmrINhJfed4Kj+phidBNGXWd82E1nJjZ98mo9V2s YbUerxScb9P1TMnUdPu69AeLTBH6dlgmKpQNa04KxhZwjx+JhSx+7/v6KohdRZIS Y+gfPKYYkwqtgItcQ6/otk6OWWsRx+msr+sJky3giIhkyqOLmBdxvhezuOs0Mmle 9AOn3UrXubNteGR48AfYi+bOIb8FPQLoHOAgVIL0fbhqF2mzSNw= =nOGB -----END PGP SIGNATURE----- Merge tag 'soc-arm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC ARM code updates from Arnd Bergmann: "These are again very minimal updates: - A workaround for firmware on Google Nexus 10 - A fix for early debugging on OMAP1 - A rework for Microchip SoC configuration - Cleanups on OMAP2 an R-Car-Gen2" * tag 'soc-arm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4 ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX arm64: Kconfig: provide a top-level switch for Microchip platforms ARM: shmobile: rcar-gen2: Use of_phandle_args_equal() helper ARM: omap: fix all kernel-doc warnings ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo ARM: samsung: exynos5250: Allow CPU1 to boot |
||
|
Linus Torvalds
|
231d703058 |
soc: defconfig updates for 7.1
As usual, we enable a number of additional device drivers as loadable modules, to support the added platforms. The largest change this time is for OMAP2/3, which were not that well supported in the generic arm32 defconfig. The Tegra SoC platforms are now enabled by default in Kconfig when ARCH_TEGRA is enabled, which means the defconfig change is done at the same time as the Kconfig change here. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnhC1IACgkQmmx57+YA GNlH1BAAtiJ53U6+xf83+Eou3trytyXIs3qTw+wQ0mRfXxczeVMV76lRpLcK78iI 8gZg0zMb71kEI4kScOqraewtVGap2ktkz40Nw146q+K+ctj0Qklb54oA+ZS/NVra nE0Cc3PCJkbWTUHQoYpLwiGefFJrahOm7q14JHedmS07Z7BUwzZRaefOp8Jdjafu sEo1gX4lW8f8Yh2HXxf2QuRTcihzGR/kqzYzzl44M4dC5QFRD0ddcUVYgKsfYLkA mp8+mdTcIeNTyOpf9BT0OSXDnt7242lzM+vg59rsp5BY9fxiO1kA1K6gsKb4OCX/ v0R46ZsPdE1NV8BvnZ7eEUUKOhtjzu0hITtVgNg5DsLnRzhuEe/8FEUx1mB2jY56 IwvjchSkUoRX2MPFjSneLSe+u+wZFXaeLNnmkVsIe9CYUThsydZyL8g+l5/xPaTC MMcrI8CehNehZ+ZW5fSt49zXzp80PivdG39xmoKc/UmGIGtPyl7Ual1OEVf+OoxR H8UguX368MK4h5e1KjNZynT/z3obxuOc9e1sqddWx2khDYp0XcGeRcc0nyMREruQ 5Nvyx3KaqRGQBrPUyWBOB9G7ItgIv18aZ+eTtzI5xcgZxvzEmhbwrVecsMjh9B9f 3g3eWOBcV5GbJ1RpN+z5wRXhmQuAXOWWWSCoAUhpm3QpdpNWxo4= =OCxO -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "As usual, we enable a number of additional device drivers as loadable modules, to support the added platforms. The largest change this time is for OMAP2/3, which were not that well supported in the generic arm32 defconfig. The Tegra SoC platforms are now enabled by default in Kconfig when ARCH_TEGRA is enabled, which means the defconfig change is done at the same time as the Kconfig change here" * tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) arch/arm: Drop CONFIG_FIRMWARE_EDID from defconfig files arm64: defconfig: Enable DP83TG720 PHY driver arm64: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC ARM: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC arm64: defconfig: enable pci-pwrctrl-generic as module arm64: defconfig: Enable Lontium LT8713sx driver arm64: defconfig: Enable Qualcomm Eliza SoC display clock controller arm64: defconfig: enable IPQ5210 RDP504 base configs arm64: defconfig: Enable Milos LPASS LPI pinctrl driver arm64: defconfig: Enable Kaanapali clock controllers arm64: defconfig: Enable configs for Arduino VENTUNO Q arm64: defconfig: Enable Qualcomm Eliza basic resource providers arm64: defconfig: Enable S5KJN1 camera sensor arm64: defconfig: Enable configurations for Toradex Aquila AM69 arm64: defconfig: remove SENSORS_SA67MCU arm64: defconfig: Enable Qualcomm WCD937x headphone codec as module arm64: defconfig: Enable QCOMTEE module for QTEE-enabled Qualcomm SoCs ARM: shmobile: defconfig: Refresh for v7.0-rc1 arm: multi_v7_defconfig: Enable more OMAP 3/4 related configs ARM: multi_v7_defconfig: omap2plus_defconfig: Enable ITE IT66121 driver ... |