Add the (scarce) idle states for the individual CPUs, as well as the
whole cluster. This enables deeper-than-WFI cpuidle
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606-topic-qcm2290_idlestates-v2-1-580a5a2d28c9@linaro.org
This patch adds thermal zone nodes for the various
sensors present in IPQ9574
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/404c88e9746b3f25585aef078861ec2c273232d5.1686125196.git.quic_varada@quicinc.com
IPQ9574 has a tsens v2.3.1 peripheral which monitors temperatures
around the various subsystems on the die.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/00fa16039db78dcb919bd15444bbf86ff3a340d6.1686125196.git.quic_varada@quicinc.com
According to bindings, thermal zones must have associated trips as well.
Since we currently dont have CPUFreq support and thus no passive cooling
lets start by defining critical trips to protect the devices against
severe overheating.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com
Add opp-peak-kBps to CPU OPPs to allow for CBF scaling, and change the
CBF compatible to reflect the difference between it and the one on
MSM8996.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230527093934.101335-3-y.oudjana@protonmail.com
There is no need for the RRADC to be disabled by default,
lets just enable it by default and not clutter up DT.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524-pmi8998-charger-dts-v2-1-2a5c77d2ff0c@linaro.org
Add a simple-mfd representing IMEM on QDU1000 and define the PIL
relocation info region, so that post mortem tools will be able
to locate the loaded remoteprocs.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230522151206.22654-3-quic_kbajaj@quicinc.com
Change underscores in ROM node names to dashes, and remove deprecated
pwm-period property.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230519180728.2281-5-aweber.kernel@gmail.com
In IPQ SoCs, bootloader will collect the system RAM contents upon crash for
the post morterm analysis. If we don't reserve the memory region used by
bootloader, obviously linux will consume it and upon next boot on crash,
bootloader will be loaded in the same region, which will lead to loose some
of the data, sometimes we may miss out critical information. So lets
reserve the region used by the bootloader.
Similarly SBL copies some data into the reserved region and it will be
used in the crash scenario. So reserve 1MB for SBL as well.
While at it, drop the size padding in the smem memory region.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230519133844.23512-4-quic_kathirav@quicinc.com
Add the definition for the UART1 found on IPQ5332 SoC.
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230519133844.23512-3-quic_kathirav@quicinc.com
To align with ipq5332-rdp468.dts, lets rename the mi01.2 dts as well to
ipq5332-rdp441.dts.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230519133844.23512-2-quic_kathirav@quicinc.com
The device has a WCN3988 chip for WiFi and Bluetooth. Configure the
Bluetooth node and enable the UART it is connected to, plus the
necessary pinctrl that has been borrowed with comments from
sc7280-idp.dtsi.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230421-fp4-bluetooth-v2-4-3de840d5483e@fairphone.com
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-8-b4a985f57b8b@linaro.org
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: 5f82b9cda6 ("arm64: dts: qcom: Add SM6350 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-7-b4a985f57b8b@linaro.org
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: c83545d953 ("arm64: dts: sdm845: Add rpmh-rsc node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-6-b4a985f57b8b@linaro.org
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: 07c8ded6e3 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-5-b4a985f57b8b@linaro.org
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-4-b4a985f57b8b@linaro.org
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Fixes: 6bd20c54b5 ("arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-3-b4a985f57b8b@linaro.org
In IPQ SoCs, bootloader will collect the system RAM contents upon crash
for post-morterm analysis. If we don't reserve the memory region used
by bootloader, obviously linux will consume it and upon next boot on
crash, bootloader will be loaded in the same region, which will lead to
loss of some data, sometimes we may miss out critical information.
So lets reserve the region used by the bootloader.
Similarly SBL copies some data into the reserved region and it will be
used in the crash scenario. So reserve 1MB for SBL as well.
While at it, drop the size padding in the reserved memory region,
wherever applicable
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230602084431.19134-1-quic_anusha@quicinc.com
Add the initial device tree support for the Reference Design
Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, eMMC, I2C and GPIO based buttons.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230605080531.3879-5-quic_kathirav@quicinc.com
Document the MI01.9 (Reference Design Platform 474) board based on IPQ5332
family of SoCs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230605080531.3879-4-quic_kathirav@quicinc.com
The LPASS (Low Power Audio Subsystem) Audio clock controller provides reset
support when it is under the control of Q6DSP.
Add support for those resets and adds IDs for clients to request the reset.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-3-srinivas.kandagatla@linaro.org
The LPASS (Low Power Audio Subsystem) clock controller provides reset
support when it is under the control of Q6DSP.
Add support for those resets and adds IDs for clients to request the reset.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-2-srinivas.kandagatla@linaro.org
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C. The recording links were not tested,
but should be similar to previous platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-2-krzysztof.kozlowski@linaro.org
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C. The recording links were not tested,
but should be similar to previous platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-1-krzysztof.kozlowski@linaro.org
Add basic devicetree support for SDX75 platform and IDP board from
Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-6-git-send-email-quic_rohiagar@quicinc.com
The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.
Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-4-a288f24af81b@linaro.org
The DisplayPort blocks are powered by MMCX and should be described as
such to ensure that power votes are done on the right resource.
This also solves the problem that sync_state is unaware of the DP
controllers needing MMCX to be kept alive during boot. As such this
change also fixes occasionally seen crashes during boot due to
undervoltage of MMCX.
Fixes: 494dec9b6f ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220739.1886155-1-quic_bjorande@quicinc.com
The adreno smmu should be compatible with qcom,adreno-smmu as well for
per-process page tables to work.
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220532.1884860-1-quic_bjorande@quicinc.com
&dispcc status was changed to okay by default in the platform, no need
to do it again in the board.
Fixes: 2ce38cc1e8 ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220420.1884631-1-quic_bjorande@quicinc.com
