Replace a bare kfree_skb() with a modern sk_skb_reason_drop() call,
and provide IP_OUTNOROUTES drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511072310.1094859-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace a bare kfree_skb() with a modern sk_skb_reason_drop() call,
and provide IP_OUTNOROUTES drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511072310.1094859-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_skb_reason_drop() does not change sock parameter, make it
const so that we can call it from TCP stack without a cast
on a (const) listener socket.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511072310.1094859-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iproute2 can spend considerable amount of time in ll_init_map()
or ll_link_get() to dump verbose netdev attributes, contributing
to RTNL pressure.
Add RTEXT_FILTER_NAME_ONLY new flag so that rtnl_fill_ifinfo()
limits its output to:
- struct nlmsghdr
- IFLA_IFNAME
- IFLA_PROP_LIST (alternate names)
We can later avoid using RTNL when RTEXT_FILTER_NAME_ONLY
is requested, as none of these attributes need RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511070244.971028-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by one
the PCI_DEVICE macros and then list expressions. The latter isn't easily
readable if you're not into PCI. Using named initializers is more
explicit and thus easier to parse.
Also use PCI_DEVICE* helper macros to assign .vendor, .device,
.subvendor and .subdevice where appropriate and skip explicit
assignments of 0 (which the compiler takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
This change doesn't introduce changes to the compiled pci_device_id
arrays. Tested on x86 and arm64.
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Forwarded: id:76da4f44d48bdde84580963862bf9616bee5c9e9.1778149923.git.u.kleine-koenig@baylibre.com (v2)
Reviewed-by: Michael Grzeschik <mgr@kernel.org>
Link: https://patch.msgid.link/20260511090023.1634387-6-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With .class_mask being zero the value of .class doesn't matter because
to check if a pci_device_id entry matches a given device the expression
(id->class ^ dev->class) & id->class_mask
is checked for being zero (see pci_match_one_device()). So drop the
useless and irritating assignment for .class to match what (I think) all
other drivers are doing that don't need to match on .class, i.e. set
both members to zero.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260511090023.1634387-5-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report PCS receive error counts for all supported PEF 7061, 7071, 7072 and
xRX200 PHYs.
Accumulate the vendor-specific PHY_ERRCNT read-clear counter
(SEL=RXERR) in .update_stats() and expose it as both IEEE 802.3
SymbolErrorDuringCarrier and generic rx_errors via
.get_phy_stats().
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20260509205933.3965832-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test was converted from shell script to drv-net test.
The new version is flaky in dbg builds on the netdev.bots dashboard.
The previous shell script had more protections to avoid these. Added
in commit a7ee79b9c4 ("selftests: net: cope with slow env in
so_txtime.sh test").
Add the same overall protection:
- Suppress so_txtime process failure if KSFT_MACHINE_SLOW
Also relax two timeouts to reduce the number of process failures
themselves
- Increase SO_RCVTIMEO to 2 seconds
- Increase process start-up stabilization to 2 seconds
Delays were experimentally arrived at while running with vng
built with kernel/configs/debug.config
Fixes: 5c6baef388 ("selftests: drv-net: convert so_txtime to drv-net")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20260510174219.74aeee6d@kernel.org/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260511222138.2045551-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sizeof(u32) on the _RINGS_CQE_SIZE line is missing its closing
parenthesis, causing nla_total_size() to absorb the subsequent
_TX_PUSH and _RX_PUSH entries.
The resulting size estimate happens to be numerically identical
due to NLA alignment, so not treating this as a real fix.
But the nesting is wrong and misleading.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260508125412.189804-1-cuitao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net/sched: prepare lockless qdisc dumps
Goal is to no longer acquire RTNL in qdisc dumps.
This series annotate data-races, and change mq and mq_prio to
no longer acquire children qdisc spinlocks.
====================
Link: https://patch.msgid.link/20260510091455.4039245-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare mqprio_dump_class_stats() for RTNL avoidance.
Use RCU instead of RTNL, and no longer acquire each children spinlock.
As a bonus we no longer have to release/acquire d->lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare mqprio_dump() for RTNL avoidance.
Use RCU instead of RTNL, and no longer acquire each children spinlock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare mq_dump_common() for RTNL avoidance.
Use RCU instead of RTNL, and no longer acquire each children spinlock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add qstats_backlog_sub() and qstats_backlog_add() helpers
and use them instead of open-coding them.
These helpers use WRITE_ONCE() to prevent store-tearing.
Also use WRITE_ONCE() in fq_reset() and qdisc_reset()
when sch->qstats.backlog is cleared.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Helpers to increment or decrement sch->q.qlen, with appropriate
WRITE_ONCE() to prevent store tearing.
Add other WRITE_ONCE() when sch->q.qlen is changed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stats are read locklessly, add READ_ONCE() to prevent load-tearing.
Write side will be handled in separate patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chunzhi.lin says:
====================
net: phy: motorcomm: add ACPI _DSD property support
This series makes the Motorcomm PHY driver parse firmware properties via
device_property_*() so the same property set can be provided by either
Devicetree or ACPI _DSD.
Patch 1 switches drivers/net/phy/motorcomm.c from of_property_*() to
device_property_*() on &phydev->mdio.dev.
Patch 2 documents Motorcomm yt8xxx PHY ACPI _DSD properties under
Documentation/firmware-guide/acpi/dsd and links the new document from
the ACPI index.
====================
Link: https://patch.msgid.link/20260507040221.3679454-1-linchunzhi0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document Motorcomm yt8xxx PHY ACPI _DSD properties consumed by
the motorcomm PHY driver.
Describe property placement, UUID usage, and reference the DT binding
for value constraints and defaults.
Signed-off-by: chunzhi.lin <linchunzhi0@gmail.com>
Changes in v2:
- Keep dsd/ entries sorted in Documentation/firmware-guide/acpi/index.rst
Link: https://patch.msgid.link/20260507040221.3679454-3-linchunzhi0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Motorcomm PHY driver reads optional firmware properties via
of_property_read_*() from phydev->mdio.dev.of_node. This works for
Device Tree based systems, but causes ACPI platforms to ignore the same
properties when they are supplied through _DSD.
As a result, ACPI-described Motorcomm PHY devices fall back to default
settings instead of applying firmware-provided tuning such as
rx/tx internal delay, drive strength, clock output frequency, and
optional boolean controls like auto-sleep-disabled,
keep-pll-enabled, and tx clock inversion.
Switch these lookups to device_property_read_*() so the driver uses the
generic firmware node interface and can consume the same property names
from either Device Tree or ACPI.
This keeps the existing DT behavior unchanged while allowing ACPI
platforms to honor PHY configuration from firmware.
We have completed testing on Sophgo RISC-V architecture server SD3-10.
This server has a 64-core Thead C920 CPU whose DWMAC is connected to
Motorcomm's PHY YT8531. This server supports UEFI boot and it would like
to use the ACPI table.
Signed-off-by: chunzhi.lin <linchunzhi0@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260507040221.3679454-2-linchunzhi0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: in-kernel: increase limits
Allow switching from 8 to 64 for the maximum number of subflows and
accepted ADD_ADDR, and from 8 to 255 for the number of MPTCP endpoints.
The previous limit of 8 subflows makes sense in most cases. Using more
subflows will very likely *not* improve the situation, and could even
decrease the performances. But there are no technical limitations nor
performance impact to raise this limit, so let's do it: this will allow
people with very specific use-cases, and researchers to easily create
more subflows, and measure the performance impact by themselves.
- Patches 1-2: increase subflows and accepted ADD_ADDR limits.
- Patches 3-4: increase endpoints limit.
- Patches 5-7: validate the new limits: 64 subflows, 255 endpoints.
- Patch 8: selftests: use send()/recv() instead of sendto()/recvfrom().
====================
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-0-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of sendto() and recvfrom() which the NL address that was already
provided before.
Just simpler and easier to read without the to/from variants.
While at it, fix a checkpatch warning by removing multiple assignments.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-8-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These limits have been recently updated, from 8 to:
- 64 for the subflows and accepted add_addr
- 255 for the MPTCP endpoints
These modifications validate the new limits, but are also compatible
with the previous ones, to be able to continue to validate stable kernel
using the last version of the selftests. That's why new variables are
now used instead of hard-coded values.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-7-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The limits have been recently increased, it is required to validate that
having 64 subflows is allowed.
Here, both the client and the server have 8 network interfaces. The
server has 8 endpoints marked as 'signal' to announce all its v4
addresses. The client also has 8 endpoints, but marked as 'subflow' and
'fullmesh' in order to create 8 subflows to each address announced by
the server. This means 63 additional subflows will be created after the
initial one.
If it is not possible to increase the limits to 64, it means an older
kernel version is being used, and the test is skipped.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-6-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, 4 network interfaces are created per subtest in a dedicated
net namespace. Each netns has a dedicated pair of v4 and v6 addresses.
Future tests will need more.
Simply always creating more network interfaces per test will increase
the execution time for all other tests, for no other benefits. So now it
is possible to change this number only when needed, by setting ifaces_nr
when calling 'reset' and 'init_shapers', e.g.
ifaces_nr=8 reset "Subtest title"
ifaces_nr=8 init_shapers
Note that it might also be interesting to decrease the default value to
2 to reduce the setup time, especially when a debug kernel config is
being used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-5-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The endpoints are managed in a list which was limited to 8 entries.
This limit can be too small in some cases: by having the same limit as
the number of subflows, it might not allow creating all expected
subflows when having a mix of v4 and v6 addresses that can all use MPTCP
on v4/v6 only networks.
While increasing the limit above the new subflows one, why not using the
technical limit: 255. Indeed, the endpoint will each have an ID that
will be used on the wire, limited to u8, and the ID 0 is reserved to the
initial subflow.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-4-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp_rm_list structure contains an array of IDs of 8 entries: to be
able to send a RM_ADDR with 8 IDs. This limitation was OK so far because
there could maximum 8 endpoints.
But this is going to change in the next commit. To cope with that, if
one of the arrays is full, the iteration stops, the lists are processed,
then the iteration continues where it previously stopped.
Note that if there are many endpoints to remove, and multiple RM_ADDR to
send, it might be more likely that some of these RM_ADDRs are dropped or
lost. This is a known limitation: RM_ADDR are not retransmitted in
MPTCPv1.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-3-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This means switching the maximum from 8 to 64 for the number of subflows
and accepted ADD_ADDR.
The previous limit of 8 subflows makes sense in most cases. Using more
subflows will very likely *not* improve the situation, and could even
decrease the performances. But there are no technical limitations nor
performance impact to raise this limit, so let's do it: this will allow
people with very specific use-cases, and researchers to easily create
more subflows, and measure the performance impact by themselves.
The theoretical limit is 255 -- the ID is written in a u8 on the wire --
but 64 is more than enough. With so many subflows, it will be costly to
iterate over all of them when operations are done in bottom half.
Note that the in-kernel PM will continue to create subflows in reply to
ADD_ADDR with a single batch of maximum 8 subflows. Same when adding new
"subflow" endpoints with the fullmesh flag. Increasing those batch
limits would have a memory impact, and it looks fine not to cover these
cases with larger batches for the moment. If more is needed later, the
position of the last subflow from the list could be remembered, and the
list iteration could continue later.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/434
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-2-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The in-kernel PM can create subflows in reply to ADD_ADDR by batch of
maximum 8 subflows for the moment. Same when adding new "subflow"
endpoints with the fullmesh flag. This limit is linked to the arrays
used during these steps.
There was no explicit limit to the arrays size (8), because the limit of
extra subflows is the same (8). It seems safer to use an explicit limit,
but also these two sizes are going to be different in the next commit.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-1-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qdisc_offload_dump_helper(), originated from commit 602f3baf22
("net_sch: red: Add offload ability to RED qdisc"), is designed to that
Whether RED is being offloaded is being determined every time dump
action is being called because parent change of this qdisc could
change its offload state but doesn't require any RED function to be
called.
and returning -EOPNOTSUPP (for dump queries) does not mean "I don't have
any statistics", but "I don't offload this qdisc anymore". At least two
existing drivers did it wrong, so it is worth mentioning.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260507214054.2539790-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5: Steering misc enhancements
This small series by Yevgeny contains a few steering enhancements /
cleanups.
====================
Link: https://patch.msgid.link/20260507173443.320465-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove a field that was never used.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260507173443.320465-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260507173443.320465-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case the device is down for any reason (e.g. FLR),
the HW will no longer generate completions - no point
polling and waiting for timeout.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260507173443.320465-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allison Henderson says:
====================
Log clean up and TAP follow ups
This is a follow up series to the "Log collection, TAP compliance and
cleanups" set. The sashiko report had made some points that I thought
was worth addressing. This patch set fixes a few more TAP compliance
prints in the check_gcov* routines. Also since the user must now pass
in the log folder to collect logs, log clean up is tightened to only
remove rds* prefixed artifacts instead of the entire folder. Lastly a
the signal handler alarm should be disarmed after the completes to
avoid multiple calls to the stop_pcaps routine.
====================
Link: https://patch.msgid.link/20260507233213.556182-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A race in stop_pcaps is possible if the test completes and then
times out while waiting for the tcpdump process to exit. The
signal handler may fire again and needlessly call stop_pcap a
second time. Fix this by disabling the alarm after normal
test completion.
Also if there are no tcpdump processes to wait on, stop_pcaps can
just exit. This avoids misleading prints when there are no procs
to collect dumps from.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260507233213.556182-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the # prefix to info and warning prints in
the check_gcov* routines. Since these routines do not exit,
as the other check_* routines do, the output here should be
kept TAP compliant.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260507233213.556182-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since rds self tests no longer has a default folder, users must
specify a log collection folder if they want to collect logs.
Currently the log folder is deleted and recreated, but this can
be dangerous if the user exports RDS_LOG_DIR=/tmp or /var/log.
This patch corrects the clean up to delete only rds log artifacts
from the log folder, and further prefixes rds specific logs as rds*
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260507233213.556182-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cosmin Ratiu says:
====================
ipv4: Flush the FIB once on multiple nexthop removal
This series optimizes multiple nexthop removal performance from having
to do a FIB flush for each nexthop being removed to only doing a single
FIB flush after all nexthops are removed.
This dramatically improves performance in scenarios where there are
many nexthops and many ipv4 routes. Please see individual patches for
more details and for a test scenario.
====================
Link: https://patch.msgid.link/20260507075606.322405-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These functions return a signal whether FIB flushing is required which
must not be ignored. Use the compiler to help with enforcing this
requirement in the future.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260507075606.322405-4-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a device is going down or when a net namespace is deleted, all
nexthops on it are removed, and for each nexthop being removed the FIB
table is flushed, which does a full trie traversal looking for entries
marked RTNH_F_DEAD and removing them. This is O(N x R), with N being
number of dev nexthops and R being number of IPv4 routes.
The RTNL is held the entire time.
When there are many nexthops to be removed and many routing entries,
this can result in the RTNL being held for multiple minutes, which
causes unhappiness in other processes trying to acquire the RTNL (e.g.
systemd-networkd for DHCP renewals).
In a complicated deployment with multiple vxlan devices, each having
16K nexthops and a total of 128K ipv4 routes, this is exactly what
happens:
nexthop_flush_dev() # loops over 16K nexthops
-> remove_nexthop()
-> __remove_nexthop()
-> __remove_nexthop_fib() # marks fi->fib_flags |= RTNH_F_DEAD
-> fib_flush() # for EACH nexthop!
-> fib_table_flush() # walks the ENTIRE FIB, 128K entries
This patch makes use of the previously added FIB flushing signal to only
do a single FIB flush after all nexthops to be removed are marked as
RTNH_F_DEAD:
- __remove_nexthop_fib() no longer flushes the FIB.
- nexthop_flush_dev() and flush_all_nexthops() now keep track whether
any nexthop was removed and trigger a FIB flush at the end.
- a new wrapper is defined, remove_one_nexthop() which calls
remove_nexthop() and flushes if necessary. This is intended for places
which must remove a single nexthop and shouldn't worry about the need
to trigger a FIB flush. For now, the only caller is rtm_del_nexthop().
- The two direct callers of __remove_nexthop() get a WARN_ON_ONCE, since
the nh about to be removed should not have any FIB entries referencing
it when replacing or inserting a new one.
This dramatically improves performance from O(N x R) to O(N + R).
Releasing a nexthop reference in remove_nexthop() now no longer frees
it. Instead, it is deleted when the last fib_info pointing to it gets
freed via free_fib_info_rcu(). All routing code is already careful not
to take into consideration routes marked with RTNH_F_DEAD.
Tested with:
DEV=eth2
ip link set up dev $DEV
ip link add testnh0 link $DEV type macvlan mode bridge
ip addr add 198.51.100.1/24 dev testnh0
ip link set testnh0 up
seq 1 65536 | \
sed 's/.*/nexthop add id & via 198.51.100.2 dev testnh0/' | \
ip -batch -
i=1
for a in $(seq 0 255); do
for b in $(seq 0 255); do
echo "route add 10.${a}.${b}.0/32 nhid $i"
i=$((i + 1))
done
done | ip -batch -
time ip link set testnh0 down
ip link del testnh0
Without this patch:
real 0m32.601s
user 0m0.000s
sys 0m32.511s
With this patch:
real 0m0.209s
user 0m0.000s
sys 0m0.153s
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260507075606.322405-3-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Plumb a bool value throughout the various nexthop removal functions,
determined in the innermost __remove_nexthop_fib() (which still does the
FIB flushing) and propagated up all callers.
The next patch will make use of this signal to optimize the removal of
multiple nexthops by moving the FIB flushing up the call hierarchy.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260507075606.322405-2-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: convert four more protocols to getsockopt_iter
Continue the work to convert protocols to the new getsockopt_iter API.
Convert four additional getsockopt implementations to the new
sockopt_t/getsockopt_iter callback:
- MCTP
- LLC
- X.25
- KCM
These are mechanical, ABI-preserving conversions following the same
pattern as the previously converted protocols (af_packet, can/raw,
af_netlink, af_vsock): the (char __user *optval, int __user *optlen)
pair is replaced with a single sockopt_t *opt that carries the buffer
length on input and the returned size on output, and exposes an iov_iter
for the copy-out path. put_user()/copy_to_user() pairs are replaced with
a single copy_to_iter() per option, and the wrapper in
do_sock_getsockopt() handles writing optlen back to userspace.
I picked these four because each is small and self-contained.
====================
Link: https://patch.msgid.link/20260507-getsock_two-v2-0-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apply two cleanups suggested by Stanislav and bobby on the original
selftest series:
- Reorder local variable declarations into reverse christmas-tree
order (longest line first). Because that ordering puts socklen_t
optlen before the variable whose size it stores, the
"optlen = sizeof(...)" initializer is moved out of the declaration
to a plain assignment in the test body, as Stanislav suggested.
- Add ASSERT_EQ(optlen, ...) on every error path so the value the
kernel writes back to the userspace optlen is pinned down even
when the syscall returns -1. With do_sock_getsockopt() now writing
opt->optlen back to userspace unconditionally, asserting that the
netlink/vsock error paths leave the original input length untouched
guards against future regressions.
Bobby Eshleman pointed out that
SO_VM_SOCKETS_CONNECT_TIMEOUT_NEW/OLD return a sock_timeval-shaped
payload (16 bytes on 64-bit), which is wider than the u64 case
already covered. Add four tests that exercise this path:
- connect_timeout_new_exact exact-size buffer
- connect_timeout_new_oversize_clamped oversize buffer, clamped
- connect_timeout_new_undersize undersize -> -EINVAL, optlen
untouched
- connect_timeout_old_exact exact-size buffer for OLD optname
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Suggested-by: Bobby Eshleman <bobbyeshleman@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-5-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert KCM socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-4-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert X.25 socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-3-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert LLC socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-2-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
