github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-08-01 12:11:59 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph
1,351,132 Commits 1 Branch 940 Tags 24 GiB
4a135e924f
Commit Graph

1351132 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Matti Vaittinen
4a135e924f dt-bindings: ROHM BD79124 ADC/GPO 
Add binding document for the ROHM BD79124 ADC / GPO.

ROHM BD79124 is a 8-channel, 12-bit ADC. The input pins can also be used
as general purpose outputs.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/e16f54b6214b0d796216729a7e29b8f7be9ae19e.1742560649.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:52 +01:00
Brian Pellegrino
9016776f13 iio: filter: admv8818: Support frequencies >= 2^32 
This patch allows writing u64 values to the ADMV8818's high and low-pass
filter frequencies. It includes the following changes:

- Rejects negative frequencies in admv8818_write_raw.
- Adds a write_raw_get_fmt function to admv8818's iio_info, returning
  IIO_VAL_INT_64 for the high and low-pass filter 3dB frequency channels.

Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Brian Pellegrino <bpellegrino@arka.org>
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-7-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:52 +01:00
Sam Winchenbach
c31752b16d iio: core: Add support for writing 64 bit attrs 
Prior to this patch it was only possible to read 64 bit integers.

Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-6-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:52 +01:00
Sam Winchenbach
d542db7095 iio: filter: admv8818: fix range calculation 
Search for the minimum error while ensuring that the LPF corner
frequency is greater than the target, and the HPF corner frequency
is lower than the target

This fixes issues where the range calculations were suboptimal.

Add two new DTS properties to set the margin between the input frequency
and the calculated corner frequency

Below is a generated table of the differences between the old algorithm
and the new. This is a sweep from 0 to 20 GHz in 10 MHz steps.
=== HPF ===
freq = 1750 MHz, 3db: bypass => 1750 MHz
freq = 3400 MHz, 3db: 3310 => 3400 MHz
freq = 3410 MHz, 3db: 3310 => 3400 MHz
freq = 3420 MHz, 3db: 3310 => 3400 MHz
freq = 3660 MHz, 3db: 3550 => 3656 MHz
freq = 6600 MHz, 3db: 6479 => 6600 MHz
freq = 6610 MHz, 3db: 6479 => 6600 MHz
freq = 6620 MHz, 3db: 6479 => 6600 MHz
freq = 6630 MHz, 3db: 6479 => 6600 MHz
freq = 6640 MHz, 3db: 6479 => 6600 MHz
freq = 6650 MHz, 3db: 6479 => 6600 MHz
freq = 6660 MHz, 3db: 6479 => 6600 MHz
freq = 6670 MHz, 3db: 6479 => 6600 MHz
freq = 6680 MHz, 3db: 6479 => 6600 MHz
freq = 6690 MHz, 3db: 6479 => 6600 MHz
freq = 6700 MHz, 3db: 6479 => 6600 MHz
freq = 6710 MHz, 3db: 6479 => 6600 MHz
freq = 6720 MHz, 3db: 6479 => 6600 MHz
freq = 6730 MHz, 3db: 6479 => 6600 MHz
freq = 6960 MHz, 3db: 6736 => 6960 MHz
freq = 6970 MHz, 3db: 6736 => 6960 MHz
freq = 6980 MHz, 3db: 6736 => 6960 MHz
freq = 6990 MHz, 3db: 6736 => 6960 MHz
freq = 7320 MHz, 3db: 7249 => 7320 MHz
freq = 7330 MHz, 3db: 7249 => 7320 MHz
freq = 7340 MHz, 3db: 7249 => 7320 MHz
freq = 7350 MHz, 3db: 7249 => 7320 MHz
freq = 7360 MHz, 3db: 7249 => 7320 MHz
freq = 7370 MHz, 3db: 7249 => 7320 MHz
freq = 7380 MHz, 3db: 7249 => 7320 MHz
freq = 7390 MHz, 3db: 7249 => 7320 MHz
freq = 7400 MHz, 3db: 7249 => 7320 MHz
freq = 7410 MHz, 3db: 7249 => 7320 MHz
freq = 7420 MHz, 3db: 7249 => 7320 MHz
freq = 7430 MHz, 3db: 7249 => 7320 MHz
freq = 7440 MHz, 3db: 7249 => 7320 MHz
freq = 7450 MHz, 3db: 7249 => 7320 MHz
freq = 7460 MHz, 3db: 7249 => 7320 MHz
freq = 7470 MHz, 3db: 7249 => 7320 MHz
freq = 7480 MHz, 3db: 7249 => 7320 MHz
freq = 7490 MHz, 3db: 7249 => 7320 MHz
freq = 7500 MHz, 3db: 7249 => 7320 MHz
freq = 12500 MHz, 3db: 12000 => 12500 MHz

=== LPF ===
freq = 2050 MHz, 3db: bypass => 2050 MHz
freq = 2170 MHz, 3db: 2290 => 2170 MHz
freq = 2290 MHz, 3db: 2410 => 2290 MHz
freq = 2410 MHz, 3db: 2530 => 2410 MHz
freq = 2530 MHz, 3db: 2650 => 2530 MHz
freq = 2650 MHz, 3db: 2770 => 2650 MHz
freq = 2770 MHz, 3db: 2890 => 2770 MHz
freq = 2890 MHz, 3db: 3010 => 2890 MHz
freq = 3010 MHz, 3db: 3130 => 3010 MHz
freq = 3130 MHz, 3db: 3250 => 3130 MHz
freq = 3250 MHz, 3db: 3370 => 3250 MHz
freq = 3260 MHz, 3db: 3370 => 3350 MHz
freq = 3270 MHz, 3db: 3370 => 3350 MHz
freq = 3280 MHz, 3db: 3370 => 3350 MHz
freq = 3290 MHz, 3db: 3370 => 3350 MHz
freq = 3300 MHz, 3db: 3370 => 3350 MHz
freq = 3310 MHz, 3db: 3370 => 3350 MHz
freq = 3320 MHz, 3db: 3370 => 3350 MHz
freq = 3330 MHz, 3db: 3370 => 3350 MHz
freq = 3340 MHz, 3db: 3370 => 3350 MHz
freq = 3350 MHz, 3db: 3370 => 3350 MHz
freq = 3370 MHz, 3db: 3490 => 3370 MHz
freq = 3490 MHz, 3db: 3610 => 3490 MHz
freq = 3610 MHz, 3db: 3730 => 3610 MHz
freq = 3730 MHz, 3db: 3850 => 3730 MHz
freq = 3850 MHz, 3db: 3870 => 3850 MHz
freq = 3870 MHz, 3db: 4130 => 3870 MHz
freq = 4130 MHz, 3db: 4390 => 4130 MHz
freq = 4390 MHz, 3db: 4650 => 4390 MHz
freq = 4650 MHz, 3db: 4910 => 4650 MHz
freq = 4910 MHz, 3db: 5170 => 4910 MHz
freq = 5170 MHz, 3db: 5430 => 5170 MHz
freq = 5430 MHz, 3db: 5690 => 5430 MHz
freq = 5690 MHz, 3db: 5950 => 5690 MHz
freq = 5950 MHz, 3db: 6210 => 5950 MHz
freq = 6210 MHz, 3db: 6470 => 6210 MHz
freq = 6470 MHz, 3db: 6730 => 6470 MHz
freq = 6730 MHz, 3db: 6990 => 6730 MHz
freq = 6990 MHz, 3db: 7250 => 6990 MHz
freq = 7000 MHz, 3db: 7250 => 7000 MHz
freq = 7250 MHz, 3db: 7400 => 7250 MHz
freq = 7400 MHz, 3db: 7800 => 7400 MHz
freq = 7800 MHz, 3db: 8200 => 7800 MHz
freq = 8200 MHz, 3db: 8600 => 8200 MHz
freq = 8600 MHz, 3db: 9000 => 8600 MHz
freq = 9000 MHz, 3db: 9400 => 9000 MHz
freq = 9400 MHz, 3db: 9800 => 9400 MHz
freq = 9800 MHz, 3db: 10200 => 9800 MHz
freq = 10200 MHz, 3db: 10600 => 10200 MHz
freq = 10600 MHz, 3db: 11000 => 10600 MHz
freq = 11000 MHz, 3db: 11400 => 11000 MHz
freq = 11400 MHz, 3db: 11800 => 11400 MHz
freq = 11800 MHz, 3db: 12200 => 11800 MHz
freq = 12200 MHz, 3db: 12600 => 12200 MHz
freq = 12210 MHz, 3db: 12600 => 12550 MHz
freq = 12220 MHz, 3db: 12600 => 12550 MHz
freq = 12230 MHz, 3db: 12600 => 12550 MHz
freq = 12240 MHz, 3db: 12600 => 12550 MHz
freq = 12250 MHz, 3db: 12600 => 12550 MHz
freq = 12260 MHz, 3db: 12600 => 12550 MHz
freq = 12270 MHz, 3db: 12600 => 12550 MHz
freq = 12280 MHz, 3db: 12600 => 12550 MHz
freq = 12290 MHz, 3db: 12600 => 12550 MHz
freq = 12300 MHz, 3db: 12600 => 12550 MHz
freq = 12310 MHz, 3db: 12600 => 12550 MHz
freq = 12320 MHz, 3db: 12600 => 12550 MHz
freq = 12330 MHz, 3db: 12600 => 12550 MHz
freq = 12340 MHz, 3db: 12600 => 12550 MHz
freq = 12350 MHz, 3db: 12600 => 12550 MHz
freq = 12360 MHz, 3db: 12600 => 12550 MHz
freq = 12370 MHz, 3db: 12600 => 12550 MHz
freq = 12380 MHz, 3db: 12600 => 12550 MHz
freq = 12390 MHz, 3db: 12600 => 12550 MHz
freq = 12400 MHz, 3db: 12600 => 12550 MHz
freq = 12410 MHz, 3db: 12600 => 12550 MHz
freq = 12420 MHz, 3db: 12600 => 12550 MHz
freq = 12430 MHz, 3db: 12600 => 12550 MHz
freq = 12440 MHz, 3db: 12600 => 12550 MHz
freq = 12450 MHz, 3db: 12600 => 12550 MHz
freq = 12460 MHz, 3db: 12600 => 12550 MHz
freq = 12470 MHz, 3db: 12600 => 12550 MHz
freq = 12480 MHz, 3db: 12600 => 12550 MHz
freq = 12490 MHz, 3db: 12600 => 12550 MHz
freq = 12500 MHz, 3db: 12600 => 12550 MHz
freq = 12510 MHz, 3db: 12600 => 12550 MHz
freq = 12520 MHz, 3db: 12600 => 12550 MHz
freq = 12530 MHz, 3db: 12600 => 12550 MHz
freq = 12540 MHz, 3db: 12600 => 12550 MHz
freq = 12550 MHz, 3db: 12600 => 12550 MHz
freq = 12600 MHz, 3db: 13000 => 12600 MHz
freq = 12610 MHz, 3db: 13000 => 12970 MHz
freq = 12620 MHz, 3db: 13000 => 12970 MHz
freq = 12630 MHz, 3db: 13000 => 12970 MHz
freq = 12640 MHz, 3db: 13000 => 12970 MHz
freq = 12650 MHz, 3db: 13000 => 12970 MHz
freq = 12660 MHz, 3db: 13000 => 12970 MHz
freq = 12670 MHz, 3db: 13000 => 12970 MHz
freq = 12680 MHz, 3db: 13000 => 12970 MHz
freq = 12690 MHz, 3db: 13000 => 12970 MHz
freq = 12700 MHz, 3db: 13000 => 12970 MHz
freq = 12710 MHz, 3db: 13000 => 12970 MHz
freq = 12720 MHz, 3db: 13000 => 12970 MHz
freq = 12730 MHz, 3db: 13000 => 12970 MHz
freq = 12740 MHz, 3db: 13000 => 12970 MHz
freq = 12750 MHz, 3db: 13000 => 12970 MHz
freq = 12760 MHz, 3db: 13000 => 12970 MHz
freq = 12770 MHz, 3db: 13000 => 12970 MHz
freq = 12780 MHz, 3db: 13000 => 12970 MHz
freq = 12790 MHz, 3db: 13000 => 12970 MHz
freq = 12800 MHz, 3db: 13000 => 12970 MHz
freq = 12810 MHz, 3db: 13000 => 12970 MHz
freq = 12820 MHz, 3db: 13000 => 12970 MHz
freq = 12830 MHz, 3db: 13000 => 12970 MHz
freq = 12840 MHz, 3db: 13000 => 12970 MHz
freq = 12850 MHz, 3db: 13000 => 12970 MHz
freq = 12860 MHz, 3db: 13000 => 12970 MHz
freq = 12870 MHz, 3db: 13000 => 12970 MHz
freq = 12880 MHz, 3db: 13000 => 12970 MHz
freq = 12890 MHz, 3db: 13000 => 12970 MHz
freq = 12900 MHz, 3db: 13000 => 12970 MHz
freq = 12910 MHz, 3db: 13000 => 12970 MHz
freq = 12920 MHz, 3db: 13000 => 12970 MHz
freq = 12930 MHz, 3db: 13000 => 12970 MHz
freq = 12940 MHz, 3db: 13000 => 12970 MHz
freq = 12950 MHz, 3db: 13000 => 12970 MHz
freq = 12960 MHz, 3db: 13000 => 12970 MHz
freq = 12970 MHz, 3db: 13000 => 12970 MHz
freq = 13000 MHz, 3db: 13390 => 13000 MHz
freq = 13390 MHz, 3db: 13810 => 13390 MHz
freq = 13810 MHz, 3db: 14230 => 13810 MHz
freq = 14230 MHz, 3db: 14650 => 14230 MHz
freq = 14650 MHz, 3db: 15070 => 14650 MHz
freq = 15070 MHz, 3db: 15490 => 15070 MHz
freq = 15490 MHz, 3db: 15910 => 15490 MHz
freq = 15910 MHz, 3db: 16330 => 15910 MHz
freq = 16330 MHz, 3db: 16750 => 16330 MHz
freq = 16750 MHz, 3db: 17170 => 16750 MHz
freq = 17170 MHz, 3db: 17590 => 17170 MHz
freq = 17590 MHz, 3db: 18010 => 17590 MHz
freq = 18010 MHz, 3db: 18430 => 18010 MHz
freq = 18430 MHz, 3db: 18850 => 18430 MHz
freq = 18850 MHz, 3db: bypass => 18850 MHz

Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-5-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:52 +01:00
Sam Winchenbach
fb6009a28d iio: filter: admv8818: fix integer overflow 
HZ_PER_MHZ is only unsigned long. This math overflows, leading to
incorrect results.

Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-4-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:52 +01:00
Sam Winchenbach
ef0ce24f59 iio: filter: admv8818: fix band 4, state 15 
Corrects the upper range of LPF Band 4 from 18.5 GHz to 18.85 GHz per
the ADMV8818 datasheet

Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-3-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:52 +01:00
Sam Winchenbach
485eefd7f9 dt-bindings: iio: filter: Add lpf/hpf freq margins 
Adds two properties to add a margin when automatically finding the
corner frequencies.

Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250328174831.227202-2-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:52 +01:00
Martin Blumenstingl
c6316e19af iio: adc: meson: add support for the GXLX SoC 
The SARADC IP on the GXLX SoC itself is identical to the one found on
GXL SoCs. However, GXLX SoCs require poking the first three bits in the
MESON_SAR_ADC_REG12 register to get the three MPLL clocks (used as clock
generators for the audio frequencies) to work.

The reason why there are MPLL clock bits in the ADC register space is
entirely unknown and it seems that nobody is able to comment on this.
So clearly mark this as a workaround and add a warning so users are
notified that this workaround can change (once we know what these bits
actually do).

Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250330101922.1942169-3-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Martin Blumenstingl
b2729cdf2b dt-bindings: iio: adc: amlogic,meson-saradc: Add GXLX SoC compatible 
Add a compatible string for the GXLX SoC. It's very similar to GXL but
has three additional bits in MESON_SAR_ADC_REG12 for the three MPLL
clocks.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250330101922.1942169-2-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Sergio Perez
61f013df59 iio: light: bh1750: Add hardware reset support via GPIO 
Some BH1750 sensors require a hardware reset before they can be
detected on the I2C bus. This implementation adds support for an
optional reset GPIO that can be specified in the device tree.

The reset sequence pulls the GPIO low and then high before initializing
the sensor, which enables proper detection with tools like i2cdetect.
This is particularly important for sensors that power on in an
undefined state.

Signed-off-by: Sergio Perez <sergio@pereznus.es>
Link: https://patch.msgid.link/20250324135920.6802-2-sergio@pereznus.es
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Sergio Perez
3e09eb53df dt-bindings: iio: light: bh1750: Add reset-gpios property 
Some BH1750 sensors require a hardware reset via GPIO before they can
be properly detected on the I2C bus. Add a new reset-gpios property
to the binding to support this functionality.

The reset-gpios property allows specifying a GPIO that will be toggled
during driver initialization to reset the sensor.

Signed-off-by: Sergio Perez <sergio@pereznus.es>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250324135920.6802-1-sergio@pereznus.es
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Krzysztof Kozlowski
58fe539e91 dt-bindings: iio: Use unevaluatedProperties for SPI devices 
SPI devices should use unevaluatedProperties:false instead of
additionalProperties:false, to allow any SPI device properties listed in
spi-peripheral-props.yaml.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250324125313.82226-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Krzysztof Kozlowski
9ca04c5e01 dt-bindings: iio: Correct indentation and style in DTS example 
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.

No functional changes here, but saves some comments during reviews of
new patches built on existing code.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250324125313.82226-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Feng Wei
bb8d952a4f staging: iio: adt7316: replace irqd_get_trigger_type with irq_get_trigger_type 
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).

Signed-off-by: Feng Wei <feng.wei8@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Link: https://patch.msgid.link/202503270957044481PK0Xb23i08BgwkodLtEC@zte.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Siddharth Menon
0b2a4f55cc iio: frequency: ad9832: devicetree probing support 
Introduce struct for device match of_device_id to avoid relying on fallback
mechanisms, which could lead to false matches against other AD9832 variants
in the future.

Suggested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Siddharth Menon <simeddon@gmail.com>
Link: https://patch.msgid.link/20250322163211.253009-1-simeddon@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Zhang Lixu
ad02ca57e4 iio: hid-sensor-prox: Add support for 16-bit report size 
On Intel platforms, the HID_USAGE_SENSOR_HUMAN_PROXIMITY report size is 16
bits. This patch adds support for handling 16-bit report sizes for the
HID_USAGE_SENSOR_HUMAN_PROXIMITY usage in the HID sensor proximity driver.

Previously, the driver only supported 8-bit and 32-bit report sizes. With
this change, the driver can now correctly process 16-bit proximity data,
ensuring accurate human presence detection on platforms where this report
size is used.

Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250317013634.4117399-1-lixu.zhang@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Lothar Rubusch
802ede1a9b iio: accel: adxl345: cleanup regmap return values 
Regmap return values sometimes are checked being less than zero
to trigger error handling. Sometimes this is checked for being not
zero. Unify the situation and check for not being zero.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250313165049.48305-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Lothar Rubusch
77d48f5e4a iio: accel: adxl345: move INT enable to regmap cache 
Replace the interrupt enable member variable to the regmap cache. This
makes the function set_interrupts() obsolete. The interrupt enable
register is written when the driver is probed. Thus it is perfectly
cacheable.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250313165049.48305-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Lothar Rubusch
f184a095c8 iio: accel: adxl345: use regmap cache for INT mapping 
Use regmap cache to replace the maintenance of the interrupt mapping
state by a member variable intio. The interrupt mapping is initialized
when the driver is probed, and it is perfectly cacheable.

The patch will still leave the function set_interrupts(). A follow up
patch takes care of it, when cleaning up the INT enable register
variable.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250313165049.48305-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:51 +01:00
Tobias Sperling
0de3748d80 iio: adc: sort TI drivers alphanumerical 
Sort TI drivers again in an alphanumerical manner.

Signed-off-by: Tobias Sperling <tobias.sperling@softing.com>
Link: https://patch.msgid.link/20250312-sort_ti_drivers-v1-1-4e8813e662d2@softing.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-22 19:09:50 +01:00
David Lechner
9415c8b5b9 iio: adc: ad4030: explain rearranging raw sample data 
Add a comment explaining why the raw sample data is rearranged in the
in the ad4030_conversion() function. It is not so obvious from the code
why this is done.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250310-iio-adc-ad4030-check-scan-type-err-v1-5-589e4ebd9711@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-07 19:34:11 +01:00
David Lechner
15ffee89c7 iio: adc: ad4030: don't store scan_type in state 
Move getting the scan_type to ad4030_conversion(). Previously, we were
getting the scan_type in two other places, then storing it in the
state struct before using it in ad4030_conversion(). This was a bit
fragile against potential future changes since it isn't obvious that
anything that could potentially change the scan_type would need to
also update the state struct. Also, the non-obviousness of this led to
a redundant call to iio_get_current_scan_type() in
ad4030_single_conversion() since it also calls ad4030_set_mode() which
in turn calls ad4030_conversion().

To simplify things, just call iio_get_current_scan_type() in
ad4030_conversion() where the returned struct is actually used and
don't bother storing it in the state struct.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250310-iio-adc-ad4030-check-scan-type-err-v1-4-589e4ebd9711@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-07 19:34:11 +01:00
David Lechner
efaa981e67 iio: adc: ad4030: move setting mode to update_scan_mode 
Move calling ad4030_set_mode() from the buffer preenable callback to
the update_scan_mode callback. This doesn't change any functionality
but is more logical since setting the mode is a function of the scan
mask and doesn't require an "undo" operation when the buffer is
disabled.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250310-iio-adc-ad4030-check-scan-type-err-v1-3-589e4ebd9711@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-07 19:34:11 +01:00
David Lechner
dc78e71d7c iio: adc: ad4030: remove some duplicate code 
Remove some duplicate code in the ad4030_get_chan_scale() function by
simplifying the if statement.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250310-iio-adc-ad4030-check-scan-type-err-v1-2-589e4ebd9711@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-07 19:34:10 +01:00
David Lechner
de67f28abe iio: adc: ad4030: check scan_type for error 
Check scan_type for error ad4030_get_chan_scale(). Currently, this
should never fail, but it is good practice to always check for errors
in case of future changes.

Calling iio_get_current_scan_type() is moved out of the if statement
also to avoid potential issues with future changes instead of assuming
that the non-differential case does not use extended scan_type.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202503040954.n6MhjSsV-lkp@intel.com/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250310-iio-adc-ad4030-check-scan-type-err-v1-1-589e4ebd9711@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-07 19:34:10 +01:00
Andy Shevchenko
9f7140bf23 iio: amplifiers: hmc425a: Remove not fully correct comment 
The OF match table can be used outside of OF-based platforms.
Remove the (misleading) comment.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250313162254.416422-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-04-07 19:34:10 +01:00
Linus Torvalds
0af2f6be1b Linux 6.15-rc1 2025-04-06 13:11:33 -07:00
Thomas Weißschuh
0efdedb335 tools/include: make uapi/linux/types.h usable from assembly 
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.

Mirror this behaviour in the tools/ variant.

Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.

Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/
Fixes: c9fbaa8795 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2025-04-06 12:55:31 -07:00
Linus Torvalds
710329254d Turbostat 2025.05.06 
Support up to 8192 processors
 Add cpuidle governor debug telemetry, disabled by default
 Update default output to exclude cpuidle invocation counts
 Bug fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEE67dNfPFP+XUaA73mB9BFOha3NhcFAmfyzZcUHGxlbi5icm93
 bkBpbnRlbC5jb20ACgkQB9BFOha3Nhf/WA//YUPcKo4IW2Mp2i5qlN2kTFZ8WfH0
 naTO5HUgIr+zF+j+StuUL6tp/eR8QcW8BSl10wzawg3DR0+nFnnmga63dPELj5+g
 2Wh0HXR0x916UWrU+PLcgADhbU35QCQcdzZVPonFm2yj5TzvAk8AopEz+OZ2mVIP
 vt7Fe+9iCTXMr/MlKMJv5wnAR5dsXiQ8z7djcDML7QT/EO3lqG01EvFB8eKeT+Md
 qNfNA+4oIfZ4U9uoIJiqtQQxhpbvmz0IkPQjMyGPzgItCwqaG/HzsPq7gnt0AnN5
 p1vJuq8eyDI0JzCl85LFka3vJdscRalimO4J0Jii/XkaK7lJSbvtq4nBazFMaWoO
 dt2D1E0z2KMJnAzqHOGnYUKNAVcLQRMSUyHcD+5Cw8QcN1/dT8+O8saT2CCZvBcE
 g6x9Pm2IUIATtgvxEPZ8aGPUl6eWHmh6loXSKdgsZZmtzaTEsDPDVTXgdAayK6Mg
 kip5eFqP9btD7FsbBrm6FaC4gfw0KX5Uwr9HcqCrNIUngC+Rj84zwoI7h/GbOldc
 Wtb5tgYKRaTk7EQZAmXfBDlad1YB7sQ8HlcIbxawtgxPg9Nln07OojjuB8qGyqLy
 5Xi5JhT2y+71RYizrRZ3Q5Anq7ZXvST5jR35+TpGJj6e5oUJ6UyLiL3vp60HEeQQ
 JKb19ERnItMtnTk=
 =xW5/
 -----END PGP SIGNATURE-----

Merge tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux

Pull turbostat updates from Len Brown:

 - support up to 8192 processors

 - add cpuidle governor debug telemetry, disabled by default

 - update default output to exclude cpuidle invocation counts

 - bug fixes

* tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: v2025.05.06
  tools/power turbostat: disable "cpuidle" invocation counters, by default
  tools/power turbostat: re-factor sysfs code
  tools/power turbostat: Restore GFX sysfs fflush() call
  tools/power turbostat: Document GNR UncMHz domain convention
  tools/power turbostat: report CoreThr per measurement interval
  tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192
  tools/power turbostat: Add idle governor statistics reporting
  tools/power turbostat: Fix names matching
  tools/power turbostat: Allow Zero return value for some RAPL registers
  tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options
 2025-04-06 12:32:43 -07:00
Linus Torvalds
59f392fa7c soundwire fix for 6.15-rc1 
- Fix to add missing config symbol CONFIG_SND_HDA_EXT_CORE required for
    asoc driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmfyyy4ACgkQfBQHDyUj
 g0dSPhAAxQ/10i8OkHAooXKIkRwMep0ECHGulqABQiATUc/FcA26lHMdBvqWOAyI
 A/Y6Vl60DnYvdFR6bfMlUgXCH6EOUGhbjlY6JULUjMmCaQQ0P6h5WpefQaic5m2J
 YqoupDX6wVTAsc009s5vOiXX0Y+XrB4vay3kCogYAGrWBsG/uhwv4UUUn8wrf/PY
 Tczt4Aa5d+4QyTv+kvrCwlzaE0yNqgHCesAhCRUrjxq0SCmM3VIgAxZLixYCqtQz
 MUEvXKxRGetnX2EaiDYjXj9+3lJpW+9IgA0fbIByh6ruCSnLfIqK3xq7jlI0eohk
 FAn8aZyRaXr+gOXyvPvXaaDe75J37KPsq0y7C52FW2mwf4xfAEQK26WwDKuC9jwn
 zpcuWAfusQE8AJ6TRpqG/PWoQNBzkvx6fnC6Aa+ic0G/5DxPyJVlRoZvfSAvj8OO
 /eWEU1j0sd31pbceZdA9Y9T6U6BUCQCSyZGQtkyTteCJI+IV2YeV2zVWlxR9bHJK
 MqPeDjGMXMQ0xPOrQN+l/kWvbeC+YIn0fy67d7tzQoV0c+mQbk9GRJih7EtlFpst
 jGazVIH6b02OHgvmjER4HyuZppph2oNFJttRmS4/NauyZIDGIxLOi6v8m+Pt6VyZ
 YWPS5fYmhgL8LDIWwWYmg7COy5bMlvv5MDfhzYuGkp81eXKmQ2c=
 =REen
 -----END PGP SIGNATURE-----

Merge tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire

Pull soundwire fix from Vinod Koul:

 - add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc
   driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT

* tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
 2025-04-06 12:04:53 -07:00
Len Brown
03e00e373c tools/power turbostat: v2025.05.06 
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes

Signed-off-by: Len Brown <len.brown@intel.com>
 2025-04-06 14:49:20 -04:00
Len Brown
ec4acd3166 tools/power turbostat: disable "cpuidle" invocation counters, by default 
Create "pct_idle" counter group, the sofware notion of residency
so it can now be singled out, independent of other counter groups.

Create "cpuidle" group, the cpuidle invocation counts.
Disable "cpuidle", by default.

Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working
for backwards compatibilty.

Create "hwidle", all the HW idle counters

Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")

Signed-off-by: Len Brown <len.brown@intel.com>
 2025-04-06 14:29:57 -04:00
Linus Torvalds
dda8887894 Fix a perf events time accounting bug. 
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmfyslURHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1jGRw/8CZ3NyJI/g0StlH/csA4a1f58JBpIR1XY
 I+uUXuTEsd1yS1TMLz5WeK8hsLp1ZCnehojLcjY4Ee/8Tp+mBRlgYuvgJ/T7wBbI
 OOJjsSku2IHk+D3RshUJt3kG9deeBIkZSQON+HeJ28WaYzXs0qpNKnS3a5RMLJWo
 k+PS4IpRaWN5a/YIxC2XMGGxEBE0W9wJXXthIbbSozuu1uXuNiZ92cxAa8IzPiZn
 4oThM4dq1XyR4NvcjWf23206fUUVEzBoK/XS15oRK3Nk2oHMZ2ilruTxkBEaFf50
 6Nr2zNVVQ6/l6wR9DYMAQTE+UHFMJGb7+l1oSARLFKPKc9h7nj4+eItBMzkzbxXS
 wAZX0nq+kkXAr2DABHBxeT6q10OGjLHCOTrE4AfU0Iss8kmNhRPiqwuXT87dOcDa
 OWH75mrP6rkGdUdExV5+ZdB1GhBiomg/KB3YCILeM2OjrluXtZC1aHYiuS1RPh24
 KaH6H20WtRzNbF7uxRPBwOS1U3xHfFd+usZ1XnBzl2DWNz09hyJUjuG8B90EmjvI
 POQ2lyepVg2tIV/uplM0sb9J39tNZNXRlfQrmjsyuHk+1kmK+bh0lL9WVe7qQqVB
 jEX6X0yqTdLAMyRllcwRwtIhgb1u89PFRhnC3IKRfuJeuj07LTgnkOYSVwp7YQ+C
 p7eIplRJhrw=
 =slQk
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf event fix from Ingo Molnar:
 "Fix a perf events time accounting bug"

* tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix child_total_time_enabled accounting bug at task exit
 2025-04-06 10:48:12 -07:00
Linus Torvalds
302deb109d Miscellaneous scheduler fixes/updates: 
- Fix a nonsensical Kconfig combination
  - Remove an unnecessary rseq-notification
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmfysY8RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1gftQ//Sy6HJRQhC/xxLuv8N8f9bEzju5fSgEaK
 2Cg5aKmKyf6IECIAMilB3snAM4h1X1ajnGbxx98sERuDTjkjKawLD17hC5riYxyr
 fReDy6VkdNw/yALK/QcodJZHPWBbYeVT3uVO9qQSnMq6q8IJrOkM0rZwOYawo2FJ
 ID7xWUGhPTatuqm2TM4r4yzwXrPq5fHllrWEsc4LlhtXYRJmzeOGbLh63vUgUFZO
 iu0uM7qt93GoVZqPsw5fliuFE+m4Ug8fPY+hBtXZlUn/npQpR9dP3+hccXIsslCq
 H00pmnqiE5nyDo8zsOG3rzO4gml6k4JQGUWkcmzVq56n02N6naC4KTGZS79aCpaV
 7KwInYW2fzwYcd6UEVHlRqeJK/XFTcL+fDfFWSEp5T/3keeCnwilZDRAHPAgW6ot
 GxAUPT8P8qlnGhXSOMoOoJND3KChelQQzJBQc/j5EToqYCNLytqzWnPgXbzwN/Za
 ZWhlL2T39n3ykEQarlm0MOL35n/0CF27Q5dKOLeaS6OA7K1wYHOQYuCf09zRpKrv
 aaKiKhir4RyYLsfUIJD9cSO68AZQGAwXZGEyM23eErjcA/ZNHrew4TGFM3Tzwj2Q
 /7wHpWfRhhcP7igGrOoJ+YDOCvrfUSgegRYx8hgucuWmFFI1h1mrmfWy8lyPihtm
 pPy9jAwjElI=
 =n5lA
 -----END PGP SIGNATURE-----

Merge tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:

 - Fix a nonsensical Kconfig combination

 - Remove an unnecessary rseq-notification

* tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rseq: Eliminate useless task_work on execve
  sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
 2025-04-06 10:44:58 -07:00
Linus Torvalds
6f110a5e4f Disable SLUB_TINY for build testing 
... and don't error out so hard on missing module descriptions.

Before commit 6c6c1fc09d ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').

After that commit the warning became an unconditional hard error.

And it turns out not all modules have been converted despite the claims
to the contrary.  As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.

The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself.  And so anybody doing full build tests
didn't actually see this failre.

So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage.  Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.

Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fixes: 6c6c1fc09d ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2025-04-06 10:00:04 -07:00
Len Brown
994633894f tools/power turbostat: re-factor sysfs code 
Probe cpuidle "sysfs" residency and counts separately,
since soon we will make one disabled on, and the
other disabled off.

Clarify that some BIC (build-in-counters) are actually "groups".
since we're about to re-name some of those groups.

no functional change.

Signed-off-by: Len Brown <len.brown@intel.com>
 2025-04-06 12:53:18 -04:00
Zhang Rui
f8b136ef26 tools/power turbostat: Restore GFX sysfs fflush() call 
Do fflush() to discard the buffered data, before each read of the
graphics sysfs knobs.

Fixes: ba99a4fc8c ("tools/power turbostat: Remove unnecessary fflush() call")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
 2025-04-06 12:36:03 -04:00
Len Brown
3ae8508663 tools/power turbostat: Document GNR UncMHz domain convention 
Document that on Intel Granite Rapids Systems,
Uncore domains 0-2 are CPU domains, and
uncore domains 3-4 are IO domains.

Signed-off-by: Len Brown <len.brown@intel.com>
 2025-04-06 12:31:59 -04:00
Len Brown
f729775f79 tools/power turbostat: report CoreThr per measurement interval 
The CoreThr column displays total thermal throttling events
since boot time.

Change it to report events during the measurement interval.

This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*

Document CoreThr on turbostat.8

Fixes: eae97e053f ("turbostat: Support thermal throttle count print")
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
 2025-04-06 12:21:25 -04:00
Justin Ernst
eb187540d1 tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192 
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
	"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"

A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
	# turbostat -c 1100-1151
	"--cpu 1100-1151" malformed
	...

Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.

It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.

Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.

Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Len Brown <len.brown@intel.com>
 2025-04-06 12:14:14 -04:00
Linus Torvalds
16cd1c2657 A set of final cleanups for the timer subsystem: 
1) Convert all del_timer[_sync]() instances over to the new
      timer_delete[_sync]() API and remove the legacy wrappers.
 
      Conversion was done with coccinelle plus some manual fixups as
      coccinelle chokes on scoped_guard().
 
   2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
 
      This has been delayed to the end of the merge window, so that all
      patches which have been merged through other trees are in mainline and
      all new users are catched.
 
 Doing this right before rc1 ensures that new code which is merged post rc1
 is not introducing new instances of the original functionality.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmfyXi0THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoYzlD/4ykDZbUzgTreYOxEQpBJ9elPwBhxfL
 1v8OwDjRWlNrmLup8RiUfKrlbmztGl1J/u9ld0qhjcqkywCCBC1N5S+DhCjYetyP
 MPWLbi2Dc35cFA+M7i8fMgxI2K9MLz2Zj1UKxz1MdsSuNHm07N3mul/3T11Ye4Rz
 nPlzeQBTBDFCKTEGKjr8zjuoD15Wl48sObM0AjV35BPuQR1jfY4CE6VXo2h78+0c
 jYwpJpDmcd+o1bDrfFhWUME2DzABEkHhn4wNSETnM4E5RXZRMUbi4UiigzInibQr
 JOUTKwPJXTMX/Erd0XyXErrYf2qy1X9BQy6NlyDDOv+8kLEVRsC9Efplx9uoEtfi
 QvVT/UmgmhZFJBfIT3/B8OvasrfwOropaYoG4L0zbDpp1b09VY47N5lCLlNr/mZf
 jb2TwIln8Szy2EfIT2RSd0ZNupyU8V4aH/mYNpSlbUJ6mfvfIAttBSS/YH+Zeqku
 7zOJkoCusaySOCZCOQkeikL3ZBN+FHtNteXxmGnp34ed/tsfgGZj1lsbmkM2rrWo
 f2mQsYAclUA4KQeY9z/Xf7/c5wJUkME69PxOaaN23dOpBR7GA58Cvb0PQTnPlAiT
 KnH/JRweBHtcv4KEHMi2f5no4cxcmXyKTj7/TLyYNjc8LATL9Eo/nxG36PLxy4lN
 QPOWz11zEBLjQQ==
 =8Ftq
 -----END PGP SIGNATURE-----

Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer cleanups from Thomas Gleixner:
 "A set of final cleanups for the timer subsystem:

   - Convert all del_timer[_sync]() instances over to the new
     timer_delete[_sync]() API and remove the legacy wrappers.

     Conversion was done with coccinelle plus some manual fixups as
     coccinelle chokes on scoped_guard().

   - The final cleanup of the hrtimer_init() to hrtimer_setup()
     conversion.

     This has been delayed to the end of the merge window, so that all
     patches which have been merged through other trees are in mainline
     and all new users are catched.

  Doing this right before rc1 ensures that new code which is merged post
  rc1 is not introducing new instances of the original functionality"

* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracing/timers: Rename the hrtimer_init event to hrtimer_setup
  hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
  hrtimers: Rename debug_init() to debug_setup()
  hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
  hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
  hrtimers: Make callback function pointer private
  hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
  hrtimers: Switch to use __htimer_setup()
  hrtimers: Delete hrtimer_init()
  treewide: Convert new and leftover hrtimer_init() users
  treewide: Switch/rename to timer_delete[_sync]()
 2025-04-06 08:35:37 -07:00
Linus Torvalds
ff0c66685d A set of updates for the interrupt subsystem: 
1) A treewide cleanup for the irq_domain code, which makes the naming
      consistent and gets rid of the original oddity of naming domains
      'host'.
 
      This is a trivial mechanical change and is done late to ensure that
      all instances have been catched and new code merged post rc1 wont
      reintroduce new instances.
 
   2) A trivial consistency fix in the migration code
 
      The recent introduction of irq_force_complete_move() in the core
      code, causes a problem for the nostalgia crowd who maintains ia64 out
      of tree.
 
      The code assumes that hierarchical interrupt domains are enabled and
      dereferences irq_data::parent_data unconditionally. That works in mainline
      because both architectures which enable that code have hierarchical domains
      enabled. Though it breaks the ia64 build, which enables the functionality,
      but does not have hierarchical domains.
 
      While it's not really a problem for mainline today, this
      unconditional dereference is inconsistent and trivially fixable by
      using the existing helper function irqd_get_parent_data(), which has
      the appropriate #ifdeffery in place.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmfyW1sTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoWywD/sG69q7rjt0bBHleXPjjUIrM5TdRI9k
 r9S3BhVtZzfreiMnhQS1CLrA64fBFhKGJVo9HtKbsjC0hF8r10A1+OKEftYpydPz
 Mk7DreqCvQO/GQ/p2MiwHiQL39iXW5eFqL8qScafD8jUnkQ1kjHu53blLuoAzx2u
 ysfe/4V3KtcziKgShss4Y0SGg3CEL5sJiLbU7SLNCSRNkO/hCPh1KYAFcsrRaXnQ
 pcnHae8N58RrgGIhe1F9oPNji2B0YdQ2vt7Ora2g6TlbMv66LYQ+QCu++/0n3HZI
 EV/ikBtuF7zwAg6qzcmfY63XfTMj/K/Oj7qKTsMtcgHFlrpcQ9HW33qMUm90rATB
 Sx/oeiJS10XFlEoseX0dO8NoRE/ZvF9wioAXnvbxxZtOchr+3hyQSbI3hGdJoncL
 mqIRyf08o5kzBoRUY7Nqztlst6/+0bBgxPgDFsW7j47V/NBlUYQ0UBlB+FyoeVfk
 RWS3Z18jpKlvVNKn67ZYRI0zlaxgyyGszwSsLTpQvOFt2HGdKiHFeCuBiBVOboel
 vhtIRW+zT3cyMKvZimQ3BfKnBgFiEKd73VQIjaHBB+eLt2DtNpq6x0dnaOQLvVau
 7eSFgBKOwEz3zAu81omcgHwMb/5/Z46e5jrtliF4YFThHWUZPZFrhrr7JFJ+pqTz
 PTNWb0zGIzQCmg==
 =lhoB
 -----END PGP SIGNATURE-----

Merge tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull more irq updates from Thomas Gleixner:
 "A set of updates for the interrupt subsystem:

   - A treewide cleanup for the irq_domain code, which makes the naming
     consistent and gets rid of the original oddity of naming domains
     'host'.

     This is a trivial mechanical change and is done late to ensure that
     all instances have been catched and new code merged post rc1 wont
     reintroduce new instances.

   - A trivial consistency fix in the migration code

     The recent introduction of irq_force_complete_move() in the core
     code, causes a problem for the nostalgia crowd who maintains ia64
     out of tree.

     The code assumes that hierarchical interrupt domains are enabled
     and dereferences irq_data::parent_data unconditionally. That works
     in mainline because both architectures which enable that code have
     hierarchical domains enabled. Though it breaks the ia64 build,
     which enables the functionality, but does not have hierarchical
     domains.

     While it's not really a problem for mainline today, this
     unconditional dereference is inconsistent and trivially fixable by
     using the existing helper function irqd_get_parent_data(), which
     has the appropriate #ifdeffery in place"

* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
  irqdomain: Stop using 'host' for domain
  irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
  irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
 2025-04-06 08:17:43 -07:00
Linus Torvalds
a91c49517d A revert to fix a adjtimex() regression: 
The recent change to prevent that time goes backwards for the coarse time
 getters due to immediate multiplier adjustments via adjtimex(), changed the
 way how the timekeeping core treats that.
 
 That change result in a regression on the adjtimex() side, which is user
 space visible:
 
  1) The forwarding of the base time moves the update out of the original
     period and establishes a new one. That's changing the behaviour of the
     [PF]LL control, which user space expects to be applied periodically.
 
  2) The clearing of the accumulated NTP error due to #1, changes the
     behaviour as well.
 
 It was tried to delay the multiplier/frequency update to the next tick, but
 that did not solve the problem as userspace expects that the multiplier or
 frequency updates are in effect, when the syscall returns.
 
 There is a different solution for the coarse time problem available, so
 revert the offending commit to restore the existing adjtimex() behaviour.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmfyVtsTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaeBEACIjssZjasdb/6sGgpp+6jdp3yCuUff
 XUB30O54u+54NBtIoxq8a8w74sI06Y1xmmRIRgmchBrylUooZyglaE1BfKZpzt5h
 FWszpSp3pfFOZ+A2rpNGWhskGxNVCDnGsPAsQSmPgCY17ZU5j+BkTSE4fcDZqftC
 E/Ojr67KD24kXGXDeQp08fSdXCfyd85PnFmpZmyqnDePuAA2JF6uAfqJE+QoeuUh
 KkQdARi+xAvXdzIRCLw5cQ/tlhxwPYrHOiMt/VRg/A44Nowl/+IEo83QjXRn7cz9
 sq1X2tAY42D/VSG01ZS8cpErWQuSYlI+hilFJ13POVZP+2xhZQUI3QzmrjG4+jqr
 s6I5g6RQyasG8tgkVTTR9+rIvSOAVkp0j0Y2tZ14e/9gi+/0+f5DYhxRc7MFPLW0
 ssS6oPIO1lsnU5KcaZ88SdDZ1OYmAj+L3R3dKM8PoggK8igZkaqezKwiH3RorKQJ
 8yZ5yfGYRNInzLHq7MUkai0xnLGbbx/hHCPZt+V7rNWP34eD+xykSKestC3wFscm
 jWAwP/CERz6mYR5mqicWkP52o39fIjbFixq+epAzBabmBJnPNBaUyb9V3MEf6ycq
 yWscFVjPu6koeX4MNUtDpcFdtb1QZJMJAtBxxnysFy03eNaryYRvta1t8EP/WgMz
 Zu71G7I8SvWrUw==
 =0MEH
 -----END PGP SIGNATURE-----

Merge tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "A revert to fix a adjtimex() regression:

  The recent change to prevent that time goes backwards for the coarse
  time getters due to immediate multiplier adjustments via adjtimex(),
  changed the way how the timekeeping core treats that.

  That change result in a regression on the adjtimex() side, which is
  user space visible:

   1) The forwarding of the base time moves the update out of the
      original period and establishes a new one. That's changing the
      behaviour of the [PF]LL control, which user space expects to be
      applied periodically.

   2) The clearing of the accumulated NTP error due to #1, changes the
      behaviour as well.

  An attempt to delay the multiplier/frequency update to the next tick
  did not solve the problem as userspace expects that the multiplier or
  frequency updates are in effect, when the syscall returns.

  There is a different solution for the coarse time problem available,
  so revert the offending commit to restore the existing adjtimex()
  behaviour"

* tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
 2025-04-06 08:13:16 -07:00
Linus Torvalds
1f80fbac0b sh updates for v6.15 
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
 - sh: Align .bss section padding to 8-byte boundary
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEYv+KdYTgKVaVRgAGdCY7N/W1+RMFAmfyN9UACgkQdCY7N/W1
 +ROSHhAAksw50el3n3Bs0vEGRlTvPYnnUkbxtg1kUgyr7NGGhhFhimiDsXdrGuN/
 iwtngYjp0wrNljIS0lSWX5p+AolC92cOskXG1vZK1JBf131LqMvdxUcOLmT32UCY
 apVnB77vI41apEozyLEiaydJOIye+ulP7vaxDeb/v6tZeWbtvIK664pHykoAn2Nw
 IJm/DvuAg6cYT4DcHldLNM/yQ7lF7tfzPnc2fENnRbKSiNrbpebNjbNGxyQgHs+6
 SXYG3RwtP8Ev+f19MSg92h+PmLK80+8i3TsCaQ11QGTRnCz0m+uM/r666k2SGfwf
 nJRC642FKxiDLaloScbY0X9xjC8R9YjYhOLp2jlkEyYvwh3iSdKvfw4xDQo50iAF
 IP+TRWtIYLNpIw6HDE1QcCafzIAD+yRNE5PRit4oJyEeCe2BskPet462riBDBt8q
 z6fo1svh+lHdapj7Eta4h1bw2y9GriMz64NDyqh2gubYjn5Yj0T1RmhuOMOn71uh
 SHVyQym25+/XLZInTWFfLaUSz3H3iJW5DZ/7adMdLg5+xMJ4MZWdUuaEf1bhU7Xg
 +mdHPEXavQa4mJ/guHP9KCk+90UrhOItz4sgnWAxPkKJtf8NpMUQlyrlXVyhf8as
 lRBt/F8pHHWzbWQYCN5UfkbAE9wTXz7KFegt4RmeQCH1xOS+Tjs=
 =96YN
 -----END PGP SIGNATURE-----

Merge tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux

Pull sh updates from John Paul Adrian Glaubitz:
 "One important fix and one small configuration update.

  The first patch by Artur Rojek fixes an issue with the J2 firmware
  loader not being able to find the location of the device tree blob due
  to insufficient alignment of the .bss section which rendered J2 boards
  unbootable.

  The second patch by Johan Korsnes updates the defconfigs on sh to drop
  the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete
  after 8c710f7525 ("net/sched: Retire tcindex classifier").

  Summary:

   - sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX

   - sh: Align .bss section padding to 8-byte boundary"

* tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
  sh: Align .bss section padding to 8-byte boundary
 2025-04-06 08:10:45 -07:00
Linus Torvalds
f4d2ef4825 Kbuild updates for v6.15 
- Improve performance in gendwarfksyms
 
  - Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
 
  - Support CONFIG_HEADERS_INSTALL for ARCH=um
 
  - Use more relative paths to sources files for better reproducibility
 
  - Support the loong64 Debian architecture
 
  - Add Kbuild bash completion
 
  - Introduce intermediate vmlinux.unstripped for architectures that need
    static relocations to be stripped from the final vmlinux
 
  - Fix versioning in Debian packages for -rc releases
 
  - Treat missing MODULE_DESCRIPTION() as an error
 
  - Convert Nios2 Makefiles to use the generic rule for built-in DTB
 
  - Add debuginfo support to the RPM package
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmfxp2EVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGkIUP/AgNiP6or6fmY5+HSyjlrdutBWAh
 QNW0AiKh5vytmBIv63/i103OE0SRbt+U6IApn9c7FQKkeuyIlD1e9NfSwFMZixmP
 P7t6JqDCL61G5d3W2Iisqle1cpBoVvNgUwu0k3sTSXl0vNsDbiyxcCzQzLhZMKsd
 O+Ppwp3zNGE2vIUwpIjzJsR5Dt/Z5MfuKDi4UShsyWpFZ1rg9X93YKc9QJOXjKwj
 4Np2x2cukDo2oz4uXuZQ8F1+bOFsKYoilCwjtxlrC6BO0lSPiJsRTN6nGJ0ejns9
 GGD56mBNGcGk+NEPGhAMQmZHqNAP4JfjEvAgaoSBn0Rdnjd9Cj/2T+4n61xkR4Wu
 MXCP/LEJ3MyctmkZjUq+0fDAe2wjxuaAG15kAHCha+9KxIG2NzHbf2XXb4E49DDU
 2rw3fqA41/cKCq1ZEaqRn3pZZgU6ysfsEW42JmnNxO+7zz9k8RX4rk8CVaVIEUuw
 Xojkis//KnE6+OCBe6Tb0H2Rzo0JF3AG2eNF4zY/xnc562FRIMS19WYS38tKZng6
 Gr1BRG0bA4t9mf2Vck1W1LcAb3Jh0mddtyrgYKhbcwq0YOj2q/H6F50DkC+wL282
 wvhV6B/vKAH8BByEWAn3rBcN0N+w/VFc0uPCz//tkoAm4nPg8PvKq63JHPrHsyZe
 mOMhifoiVbjF4KFo
 =GiQ6
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Improve performance in gendwarfksyms

 - Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS

 - Support CONFIG_HEADERS_INSTALL for ARCH=um

 - Use more relative paths to sources files for better reproducibility

 - Support the loong64 Debian architecture

 - Add Kbuild bash completion

 - Introduce intermediate vmlinux.unstripped for architectures that need
   static relocations to be stripped from the final vmlinux

 - Fix versioning in Debian packages for -rc releases

 - Treat missing MODULE_DESCRIPTION() as an error

 - Convert Nios2 Makefiles to use the generic rule for built-in DTB

 - Add debuginfo support to the RPM package

* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
  kbuild: rpm-pkg: build a debuginfo RPM
  kconfig: merge_config: use an empty file as initfile
  nios2: migrate to the generic rule for built-in DTB
  rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
  kbuild: pacman-pkg: hardcode module installation path
  kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
  modpost: require a MODULE_DESCRIPTION()
  kbuild: make all file references relative to source root
  x86: drop unnecessary prefix map configuration
  kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
  kbuild: Add a help message for "headers"
  kbuild: deb-pkg: remove "version" variable in mkdebian
  kbuild: deb-pkg: fix versioning for -rc releases
  Documentation/kbuild: Fix indentation in modules.rst example
  x86: Get rid of Makefile.postlink
  kbuild: Create intermediate vmlinux build with relocations preserved
  kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
  kbuild: link-vmlinux.sh: Make output file name configurable
  kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
  Revert "kheaders: Ignore silly-rename files"
  ...
 2025-04-05 15:46:50 -07:00
Linus Torvalds
758e4c86a1 drm fixes for 6.15-rc1 
bridge:
 - tda998x: Select CONFIG_DRM_KMS_HELPER
 
 amdgpu:
 - Guard against potential division by 0 in fan code
 - Zero RPM support for SMU 14.0.2
 - Properly handle SI and CIK support being disabled
 - PSR fixes
 - DML2 fixes
 - DP Link training fix
 - Vblank fixes
 - RAS fixes
 - Partitioning fix
 - SDMA fix
 - SMU 13.0.x fixes
 - Rom fetching fix
 - MES fixes
 - Queue reset fix
 
 xe:
 - Fix NULL pointer dereference on error path
 - Add missing HW workaround for BMG
 - Fix survivability mode not triggering
 - Fix build warning when DRM_FBDEV_EMULATION is not set
 
 i915:
 - Bounds check for scalers in DSC prefill latency computation
 - Fix build by adding a missing include
 
 adp:
 - Fix error handling in plane setup
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmfwQ5wACgkQDHTzWXnE
 hr7OIxAAn8ATKOYsyxaq0t8+gj2jhmGC1L3X6tQUzSh3uAwZpWzYlP8RVMMS9WrL
 Cwj0kBLlq71GasuG/wjEnAxuoahEWebrwTm73it9yWXWW+GsQYhOcWttvmhNSVET
 aTUdB2VM32S0QHf8t6rP0yG4XqJD95sSNnXCTh6/ksk5rhK6NpqyJRkdVBIRxI5O
 IUXxfxmREIrAq5ZfpoPuVUEA2US2W9p+L616RnILewa3iZYzK9XahfcErFU8xlS+
 796ZaYFGEWUmdJKTyCejRHz5z1afXAgKO3vRyGKbLC4MAsxk6MsWzTXsH5EMukxF
 lCtJQuODFDed2gXxLUOeXAUjWoHrgYpJBWRk23Pq83Kx2sf85MD2SF2d8pGJqMa+
 B0JYr/mFtZCi5xraHIH6rwx7k2+KqPVAl+P8f/Fye/AIxBUE3KoI43M69TQ3B2VD
 dG8Jz53DUVQ1TUGJjfZajninFfBdDlr9PgPLmp1gESjbGkI1azGXngwlaVK4kti+
 iZmM/4pbB0A/+PG7Wq1DFEhr0fvQW2RjtgXoh+CujRLgK7ZYwVbCcFpmGQgjOiXb
 IyphOc7tPiOH1EcXGSsrV5JlkyhVL0Ghu6JCKQCzF5MXbrg1fwjjUwVuGtJyqtso
 kKBbx3bx7rv577VXRhM13s0MPwOyhgi56a4kBtX7YRJqY5cVkdM=
 =P/sW
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
 "Weekly fixes, mostly from the end of last week, this week was very
  quiet, maybe you scared everyone away. It's mostly amdgpu, and xe,
  with some i915, adp and bridge bits, since I think this is overly
  quiet I'd expect rc2 to be a bit more lively.

  bridge:
   - tda998x: Select CONFIG_DRM_KMS_HELPER

  amdgpu:
   - Guard against potential division by 0 in fan code
   - Zero RPM support for SMU 14.0.2
   - Properly handle SI and CIK support being disabled
   - PSR fixes
   - DML2 fixes
   - DP Link training fix
   - Vblank fixes
   - RAS fixes
   - Partitioning fix
   - SDMA fix
   - SMU 13.0.x fixes
   - Rom fetching fix
   - MES fixes
   - Queue reset fix

  xe:
   - Fix NULL pointer dereference on error path
   - Add missing HW workaround for BMG
   - Fix survivability mode not triggering
   - Fix build warning when DRM_FBDEV_EMULATION is not set

  i915:
   - Bounds check for scalers in DSC prefill latency computation
   - Fix build by adding a missing include

  adp:
   - Fix error handling in plane setup"

  # -----BEGIN PGP SIGNATURE-----

* tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
  drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER
  drm/amdgpu/gfx12: fix num_mec
  drm/amdgpu/gfx11: fix num_mec
  drm/amd/pm: Add gpu_metrics_v1_8
  drm/amdgpu: Prefer shadow rom when available
  drm/amd/pm: Update smu metrics table for smu_v13_0_6
  drm/amd/pm: Remove host limit metrics support
  Remove unnecessary firmware version check for gc v9_4_2
  drm/amdgpu: stop unmapping MQD for kernel queues v3
  Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA"
  drm/amdgpu: Parse all deferred errors with UMC aca handle
  drm/amdgpu: Update ta ras block
  drm/amdgpu: Add NPS2 to DPX compatible mode
  drm/amdgpu: Use correct gfx deferred error count
  drm/amd/display: Actually do immediate vblank disable
  drm/amd/display: prevent hang on link training fail
  Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting"
  drm/amd/display: Increase vblank offdelay for PSR panels
  drm/amd: Handle being compiled without SI or CIK support better
  drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2
  ...
 2025-04-05 15:35:11 -07:00
Uday Shankar
a7c699d090 kbuild: rpm-pkg: build a debuginfo RPM 
The rpm-pkg make target currently suffers from a few issues related to
debuginfo:
1. debuginfo for things built into the kernel (vmlinux) is not available
   in any RPM produced by make rpm-pkg. This makes using tools like
   systemtap against a make rpm-pkg kernel impossible.
2. debug source for the kernel is not available. This means that
   commands like 'disas /s' in gdb, which display source intermixed with
   assembly, can only print file names/line numbers which then must be
   painstakingly resolved to actual source in a separate editor.
3. debuginfo for modules is available, but it remains bundled with the
   .ko files that contain module code, in the main kernel RPM. This is a
   waste of space for users who do not need to debug the kernel (i.e.
   most users).

Address all of these issues by additionally building a debuginfo RPM
when the kernel configuration allows for it, in line with standard
patterns followed by RPM distributors. With these changes:
1. systemtap now works (when these changes are backported to 6.11, since
   systemtap lags a bit behind in compatibility), as verified by the
   following simple test script:

   # stap -e 'probe kernel.function("do_sys_open").call { printf("%s\n", $$parms); }'
   dfd=0xffffffffffffff9c filename=0x7fe18800b160 flags=0x88800 mode=0x0
   ...

2. disas /s works correctly in gdb, with source and disassembly
   interspersed:

   # gdb vmlinux --batch -ex 'disas /s blk_op_str'
   Dump of assembler code for function blk_op_str:
   block/blk-core.c:
   125     {
      0xffffffff814c8740 <+0>:     endbr64

   127
   128             if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
      0xffffffff814c8744 <+4>:     mov    $0xffffffff824a7378,%rax
      0xffffffff814c874b <+11>:    cmp    $0x23,%edi
      0xffffffff814c874e <+14>:    ja     0xffffffff814c8768 <blk_op_str+40>
      0xffffffff814c8750 <+16>:    mov    %edi,%edi

   126             const char *op_str = "UNKNOWN";
      0xffffffff814c8752 <+18>:    mov    $0xffffffff824a7378,%rdx

   127
   128             if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
      0xffffffff814c8759 <+25>:    mov    -0x7dfa0160(,%rdi,8),%rax

   126             const char *op_str = "UNKNOWN";
      0xffffffff814c8761 <+33>:    test   %rax,%rax
      0xffffffff814c8764 <+36>:    cmove  %rdx,%rax

   129                     op_str = blk_op_name[op];
   130
   131             return op_str;
   132     }
      0xffffffff814c8768 <+40>:    jmp    0xffffffff81d01360 <__x86_return_thunk>
   End of assembler dump.

3. The size of the main kernel package goes down substantially,
   especially if many modules are built (quite typical). Here is a
   comparison of installed size of the kernel package (configured with
   allmodconfig, dwarf4 debuginfo, and module compression turned off)
   before and after this patch:

   # rpm -qi kernel-6.13* | grep -E '^(Version|Size)'
   Version     : 6.13.0postpatch+
   Size        : 1382874089
   Version     : 6.13.0prepatch+
   Size        : 17870795887

   This is a ~92% size reduction.

Note that a debuginfo package can only be produced if the following
configs are set:
- CONFIG_DEBUG_INFO=y
- CONFIG_MODULE_COMPRESS=n
- CONFIG_DEBUG_INFO_SPLIT=n

The first of these is obvious - we can't produce debuginfo if the build
does not generate it. The second two requirements can in principle be
removed, but doing so is difficult with the current approach, which uses
a generic rpmbuild script find-debuginfo.sh that processes all packaged
executables. If we want to remove those requirements the best path
forward is likely to add some debuginfo extraction/installation logic to
the modules_install target (controllable by flags). That way, it's
easier to operate on modules before they're compressed, and the logic
can be reused by all packaging targets.

Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
 2025-04-06 06:22:01 +09:00
Daniel Gomez
a26fe287ee kconfig: merge_config: use an empty file as initfile 
The scripts/kconfig/merge_config.sh script requires an existing
$INITFILE (or the $1 argument) as a base file for merging Kconfig
fragments. However, an empty $INITFILE can serve as an initial starting
point, later referenced by the KCONFIG_ALLCONFIG Makefile variable
if -m is not used. This variable can point to any configuration file
containing preset config symbols (the merged output) as stated in
Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will
contain just the merge output requiring the user to run make (i.e.
KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make
olddefconfig).

Instead of failing when `$INITFILE` is missing, create an empty file and
use it as the starting point for merges.

Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
 2025-04-06 06:22:01 +09:00
Masahiro Yamada
3b8241f64c nios2: migrate to the generic rule for built-in DTB 
Commit 654102df2a ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.

Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.

To keep consistency across architectures, this commit also renames
CONFIG_NIOS2_DTB_SOURCE_BOOL to CONFIG_BUILTIN_DTB, and
CONFIG_NIOS2_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
 2025-04-06 06:22:01 +09:00
Johan Korsnes
5f2efd67a1 sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX 
This option was removed from Kconfig in 8c710f7525 ("net/sched:
Retire tcindex classifier") but from the defconfigs.

Fixes: 8c710f7525 ("net/sched: Retire tcindex classifier")
Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
 2025-04-05 19:46:38 +02:00