- Buffer overflow due to missing input validation in pds
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCahDk/QAKCRCFwuHvBreF
YRxuAQCliGLeyivZ1BVcJ0rB7obSheMWS6drbJbw2H5LmRkAcwD/XHJeTHsu2Cqs
Pf8mZR5b+MZGm3SpAxYR+FJLxV4rmAc=
=CxSO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl
Pull fwctl fix from Jason Gunthorpe:
- Buffer overflow due to missing input validation in pds
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl:
fwctl: pds: Validate RPC input size before parsing
When running on a GICv5 host, we push an arch-timer-specific interrupt
domain for the timer interrupts. This interrupt domain is used to mask
the host interrupt when a GICv5 guest is running. However, this
interrupt domain is still in place when running with a GICv3 guest on
GICv5 hardware. The result is that some interrupt state changes are
not correctly propragated to the host irqchip driver for legacy
guests.
Explicitly pass irqchip state changes though to the host irqchip
driver when running a GICv3-based guest on a GICv5 host. This bypasses
all masking, and thereby operates just as a native GICv3 guest would,
with the exception of having an additional irq domain in the
hierarchy.
Fixes: 9491c63b6c ("KVM: arm64: gic-v5: Enlighten arch timer for GICv5")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-19-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
With GICv5 an interrupt of equal or lower priority cannot be signalled
until there has been a priority drop. This is done via the GIC CDEOI
system instruction. Once this has been executed, the hardware is able
to signal the next interrupt if there is one.
As all interrupts are programmed to have the same priority, no new
interrupts can be signalled until the priority drop has happened. This
can cause issues when, for example, an interrupt remains active while
a long running process takes place, such as when injecting a physical
interrupt into a guest VM in software.
The GICv5 driver has so far done the priority drop as part of
irq_eoi(), i.e., at the same time as deactivating the interrupt. This
means that any long running process (or VM) could block incoming
interrupts, effectively causing a denial of service for all other
interrupts.
Rather than doing the EOI as part of irq_eoi() (which the name would
suggest would be a good place for it), move it to happen immediately
after acknowledging an interrupt in the main GICv5 interrupt
handler. The deactivation of interrupts (GIC CDDI) remains implemented
as part of irq_eoi(), which means that the same interrupt cannot be
signalled a second time until deactivated by software.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-18-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
When running a GICv5-based guest, the PMU must use PPI 23. This,
however, must be communicated via the
KVM_ARM_VCPU_PMU_V3_CTRL->KVM_ARM_VCPU_PMU_V3_IRQ ioctl as a full
GICv5-style Interrupt ID. That is, 0x20000017. Optionally, the whole
ioctl can be skipped for GICv5.
This was previously not clearly documented, so bump the documentation
accordingly.
Fixes: 7c31c06e2d ("KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5")
Link: https://sashiko.dev/#/patchset/20260319154937.3619520-1-sascha.bischoff%40arm.com
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-17-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
For GICv5 guests we make use of the DVI mechanism for PPIs where
possible. When mapping a virtual irq to a physical one for a GICv5
guest, the corresponding bit in the DVI bitmap is set. When unmapping,
said bit is cleared again. The key user of this mechanism is the arch
timer.
The existing code used the non-atomic __assign_bit() rather than doing
the update atomically. This could technically result in losing state
if a second PPI's DVI bit were being manipulated concurrently. Each
individual bit within the DVI bitmap is guarded using
vgic_irq->irq_lock, but there's no locking for the overall
bitmap. Therefore, switch to using the atomic assign_bit() function
instead.
Fixes: 5a98d0e17e ("KVM: arm64: gic-v5: Implement direct injection of PPIs")
Link: https://sashiko.dev/#/patchset/20260319154937.3619520-1-sascha.bischoff%40arm.com
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
As things stand, there is no support for Nested Virt with GICv5 guests
yet. However, this is coming and therefore we need to be able to
correctly triage the traps when running with NV.
Add the missing fgtreg lookups required for that to
triage_sysreg_trap(). These are specific to the FGT regs added as part
of GICv5:
* ICH_HFGRTR_EL2
* ICH_HFGWTR_EL2
* ICH_HFGITR_EL2
Fixes: 9d6d9514c0 ("KVM: arm64: gic-v5: Support GICv5 FGTs & FGUs")
Link: https://sashiko.dev/#/patchset/20260319154937.3619520-1-sascha.bischoff%40arm.com
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-11-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Here are a number of fixes for memory corruption and information leaks
due to missing endpoint and transfer sanity checks dating back to
simpler times when we trusted our hardware.
Included are also a fix for a recently added modem device id entry and
some new modem devices ids.
All but the last five commits have been in linux-next and with no
reported issues.
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCahFk5RsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQhGwQEA8P0jl8Bfd7tSnjqDplH7
mVipmM3I8MBMN7ZiurSRfbMBAIOplkKAn6I3wyDoY2n+lTLUVWHcVeYFCtprkQ3Z
pAoN
=3zZY
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-7.1-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial fixes for 7.1-rc5
Here are a number of fixes for memory corruption and information leaks
due to missing endpoint and transfer sanity checks dating back to
simpler times when we trusted our hardware.
Included are also a fix for a recently added modem device id entry and
some new modem devices ids.
All but the last five commits have been in linux-next and with no
reported issues.
* tag 'usb-serial-7.1-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cypress_m8: validate interrupt packet headers
USB: serial: safe_serial: fix memory corruption with small endpoint
USB: serial: omninet: fix memory corruption with small endpoint
USB: serial: mxuport: fix memory corruption with small endpoint
USB: serial: cypress_m8: fix memory corruption with small endpoint
USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL
USB: serial: option: add MeiG SRM813Q
USB: serial: mct_u232: fix missing interrupt-in transfer sanity check
USB: serial: mct_u232: fix memory corruption with small endpoint
USB: serial: keyspan: fix missing indat transfer sanity check
USB: serial: digi_acceleport: fix memory corruption with small endpoints
USB: serial: belkin_sa: validate interrupt status length
Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and
share the same erratum #1235: hardware may read a stale IsRunning=1 bit
during ICR write emulation and silently fail to generate an
AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU.
The absence of the VM-Exit causes KVM to miss the required wakeup of
blocking target vCPUs, leading to hung vCPUs and unbounded delays in
guest execution.
Extend the existing AMD Family 17h erratum #1235 workaround to also cover
Hygon Family 18h. With IPI virtualization disabled, KVM never sets
IsRunning=1 in the Physical ID table, so every non-self IPI generates a
VM-Exit and is correctly emulated.
Fixes: 8de4a1c816 ("KVM: SVM: Disable (x2)AVIC IPI virtualization if CPU has erratum #1235")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tina Zhang <zhang_wei@open-hieco.net>
Message-ID: <20260522040014.3380201-1-zhang_wei@open-hieco.net>
Add checks in the APIC bus clock test to verify that querying
KVM_CAP_X86_APIC_BUS_CYCLES_NS on the VM after changing the frequency
returns the VM's actual APIC cycle length, not KVM's default. For
giggles, verify that KVM still returns its default frequency for the
system-scoped check.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260522173526.3539407-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM_CAP_X86_APIC_BUS_CYCLES_NS is queried on a specific VM, return the
VM's configured APIC bus frequency, not KVM's default. Aside from the fact
that returning the default frequency is blatantly wrong if userspace has
changed the frequency, returning the configured frequency means userspace
can blindly trust the result, e.g. when filling PV CPUID information that
communicates the APIC bus frequency to the guest.
Fixes: 6fef518594 ("KVM: x86: Add a capability to configure bus frequency for APIC timer")
Reported-by: David Woodhouse <dwmw2@infradead.org>
Closes: https://lore.kernel.org/all/ab84153e33fbe7c25667f595c56b310d4d5a93ef.camel@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260522173526.3539407-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
<bits/endian.h> is a glibc-internal header that explicitly states it
should never be included directly:
#error "Never use <bits/endian.h> directly; include <endian.h> instead."
Replace it with the correct public header <endian.h> which works on
all C libraries including musl. Building KVM selftests with musl-gcc
fails with:
lib/elf.c:10:10: fatal error: bits/endian.h: No such file or directory
Fixes: 6089ae0bd5 ("kvm: selftests: add sync_regs_test")
Signed-off-by: Hisam Mehboob <hisamshar@gmail.com>
Message-ID: <20260409164020.1575176-4-hisamshar@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix invalid HVA warning in steal-time recording
- Return SBI_ERR_FAILURE to guest upon OOM in pmu_event_info()
and pmu_snapshot_set_shmem()
- Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
- Fix sign extension of value for MMIO loads
-----BEGIN PGP SIGNATURE-----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=S4B4
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-fixes-7.1-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 7.1, take #1
- Fix invalid HVA warning in steal-time recording
- Return SBI_ERR_FAILURE to guest upon OOM in pmu_event_info()
and pmu_snapshot_set_shmem()
- Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
- Fix sign extension of value for MMIO loads
Fix some memory issues and some hangs in vSIE.
-----BEGIN PGP SIGNATURE-----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=Pewa
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: some vSIE and UCONTROL fixes
Fix some memory issues and some hangs in vSIE.
- Fix ITS EventID sanitisation when restoring an interrupt translation
table.
- Fix PPI memory leak when failing to initialise a vcpu.
- Correctly return an error when the validation of a hypervisor trace
descriptor fails, and limit this validation to protected mode only.
-----BEGIN PGP SIGNATURE-----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=ZZ/v
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.1, take #3
- Fix ITS EventID sanitisation when restoring an interrupt translation
table.
- Fix PPI memory leak when failing to initialise a vcpu.
- Correctly return an error when the validation of a hypervisor trace
descriptor fails, and limit this validation to protected mode only.
cypress_read_int_callback() parses the interrupt-in buffer according to
the selected Cypress packet format. Format 1 has a two-byte status/count
header and format 2 has a one-byte combined status/count header. The
usb-serial core sizes the interrupt-in buffer from the endpoint
descriptor's wMaxPacketSize, and successful interrupt transfers can
complete short when URB_SHORT_NOT_OK is not set.
Check that the completed packet contains the selected header before
reading it. Malformed short reports are ignored and the interrupt URB is
resubmitted through the existing retry path, preventing out-of-bounds
header-byte reads.
KASAN report as below:
KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0
Read of size 1
Call trace:
cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009)
__usb_hcd_giveback_urb()
dummy_timer()
Fixes: 3416eaa1f8 ("USB: cypress_m8: Packet format is separate from characteristic size")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Fixes: 3416eaa1f8 ("USB: cypress_m8: Packet format is separate from characteristic size")
Cc: stable@vger.kernel.org # 2.6.26
[ johan: use constants in header length sanity checks ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Make sure that the bulk-out endpoint max packet size is at least eight
bytes to avoid user-controlled slab corruption should a malicious device
report a smaller size.
Fixes: ee467a1f20 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver")
Cc: stable@vger.kernel.org # 3.14
Cc: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this.
Fixes: 1e57338834 ("scsi: target: iscsi: Support base64 in CHAP")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Link: https://patch.msgid.link/20260521151121.808477-1-hossu.alexandru@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsi_encode_text_output() concatenates "key=value\0" records into
login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer
allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call
sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check
the remaining buffer capacity:
*length += sprintf(output_buf, "%s=%s", er->key, er->value);
*length += 1;
output_buf = textbuf + *length;
The 8192-byte ceiling at iscsi_target_check_login_request() bounds the
*input* Login PDU payload, but a single PDU can carry up to 2048 minimal
four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte
"a=NotUnderstood\0" output record via iscsi_add_notunderstood_response().
2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB
heap overrun in the kmalloc-8k slab.
The fix introduces a static iscsi_encode_text_record() helper that uses
snprintf() with a per-call bounds check against the remaining buffer,
and threads a u32 textbuf_size parameter through
iscsi_encode_text_output(). Both call sites in
iscsi_target_handle_csg_zero() (PHASE_SECURITY) and
iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass
MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls
iscsi_release_extra_responses() to drop queued records, and returns -1;
both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR /
ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning,
so the initiator sees an explicit failed-login response rather than a
silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL
caller did that; the PHASE_SECURITY caller is converted to the same
shape.)
Fixes: e48354ce07 ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Two latent bugs in the Text-phase handler, both present since the
original LIO integration in commit e48354ce07 ("iscsi-target: Add
iSCSI fabric support for target v4.1"):
1) DataDigest CRC buffer overread (4 bytes past text_in).
text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then
incremented by ISCSI_CRC_LEN to make room for the received DataDigest
in the iovec, but the same (now-bumped) rx_size is passed as the
buffer length to iscsit_crc_buf():
if (conn->conn_ops->DataDigest) {
...
rx_size += ISCSI_CRC_LEN;
}
...
if (conn->conn_ops->DataDigest) {
data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL);
iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so
when DataDigest is negotiated it reads 4 bytes past the end of the
text_in allocation. KASAN reproduces this directly on the unpatched
mainline tree as slab-out-of-bounds in crc32c() called from the Text
PDU path. The OOB bytes feed crc32c() and are then compared against
the initiator-supplied checksum, so the value does not flow back to
the attacker, but the kernel does read past the buffer on every Text
PDU with DataDigest=CRC32C.
Fix by passing the actual padded payload length
(ALIGN(payload_length, 4)) that was used for the kzalloc().
2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest
drop.
On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler
silently drops the PDU and lets the initiator plug the CmdSN gap:
kfree(text_in);
return 0;
cmd->text_in_ptr still points at the freed buffer. The next Text
Request on the same ITT re-enters iscsit_setup_text_cmd(), which
unconditionally does
kfree(cmd->text_in_ptr);
cmd->text_in_ptr = NULL;
freeing the same pointer a second time. Session teardown via
iscsit_release_cmd() has the same shape and hits the same double-free
if the connection is dropped before a second Text Request arrives.
On an unmodified mainline tree the bug-1 CRC overread fires first on
the initial valid Text Request and perturbs the subsequent state, so
#4 was isolated by building a kernel with only the bug-1 hunk of this
patch applied plus temporary printk() observability around the three
relevant kfree() sites. The observability prints are not part of
this patch. On that build, a three-PDU Text Request sequence after
login produces two back-to-back splats:
BUG: KASAN: double-free in iscsit_setup_text_cmd+0x??
BUG: KASAN: double-free in iscsit_release_cmd+0x??
showing the same pointer freed in the ERL>0 drop path and again in
iscsit_setup_text_cmd() (next Text Request on the same ITT) and once
more in iscsit_release_cmd() (session teardown). On distro kernels
with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free
becomes a remote kernel BUG(); on non-hardened kernels it corrupts
the slab freelist.
Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop
path. With both hunks applied #4 is directly observable on the stock
tree without observability printks; fixing bug-1 alone would mask #4
less, not more, so the hunks are submitted together.
Both fixes are one-liners. The Text PDU state machine is unchanged and
the wire protocol is unaffected.
Fixes: e48354ce07 ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports
too soon.
Only after unregister_net_sysctl_table() we can be sure no threads can possibly
use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports.
Fixes: 122ff243f5 ("ipv4: make ip_local_reserved_ports per netns")
Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260521122147.3584624-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 32-bit architectures, both skb_queue_len() and SKB_TRUESIZE(0) evaluate
to 32-bit values. The multiplication can overflow before being assigned to
the u64 skb_overhead variable, making the skb overhead check ineffective.
Cast skb_queue_len() to u64 so the multiplication is always performed in
64-bit arithmetic.
This issue was reported by Sashiko while reviewing another patch.
Fixes: 059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue")
Closes: https://sashiko.dev/#/patchset/20260518090656.134588-1-sgarzare%40redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260521124732.125771-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the
descriptor cursor by an attacker-supplied fip_dlen without ever
requiring dlen >= sizeof(struct fip_desc) in the default branch. The
named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked
their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor
(fip_dtype >= 128, which the standard requires receivers to silently
ignore) skipped that check entirely.
An unauthenticated L2 peer on the FCoE control VLAN could hang
fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely
by emitting one FIP CVL frame whose single descriptor had fip_dtype ==
FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes
per iteration and the loop condition rlen >= sizeof(*desc) stayed true
forever, blocking every subsequent FIP frame on that controller.
Tighten the outer dlen guard to also reject dlen < sizeof(struct
fip_desc), so a malformed descriptor whose length cannot even cover the
descriptor header is rejected before the switch. This is the same
lower-bound the named cases already apply and is the minimum scope that
closes the loop.
Fixes: 97c8389d54 ("[SCSI] fcoe, libfcoe: Add support for FIP. FCoE discovery and keep-alive.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260518144307.2820961-1-michael.bommarito@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS
frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in
the generic FC transport. This is not a local userspace or IP network
path; the attacker must be able to inject fabric traffic, for example as
a compromised switch or fabric controller, or as a same-zone N_Port on a
fabric that permits source spoofing.
The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop
counter against the 32-bit on-wire pname_count field, and did not bound
pname_count by the descriptor body already validated by the TLV walker.
A pname_count of 256 therefore wraps the counter and keeps the loop
condition true indefinitely.
Factor the shared pname_list[] walk into one helper, widen the counter
to u32, and clamp pname_count against the entries that fit in the
descriptor body before iterating.
Fixes: 3dcfe0de5a ("scsi: fc: Parse FPIN packets and update statistics")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260520133015.1018937-1-michael.bommarito@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A "\n" at the end of the sdev_printk() string appears to have been
inadvertently removed. Add it back for correct log message formatting.
Fixes: a743b12022 ("scsi: scsi_debug: Stop printing extra function name in debug logs")
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260519205356.1040855-1-emilne@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add NULL check for scmd_local in the MPI2_FUNCTION_SCSI_IO_REQUEST case
to handle firmware duplicate/stale completions.
When firmware sends a duplicate completion for a command that was
already processed and returned to the pool, the driver accesses NULL
scmd pointer causing a crash.
Timeline of the bug:
1. Command completes normally, megasas_return_cmd_fusion() called
2. This sets cmd->scmd = NULL and clears io_request with memset(..., 0,
...)
3. Firmware sends duplicate/stale completion for same SMID (firmware
bug)
4. Driver processes reply descriptor again
5. Cleared io_request has Function = 0 (MPI2_FUNCTION_SCSI_IO_REQUEST)
6. Switch statement matches SCSI_IO_REQUEST case by accident
7. Accesses megasas_priv(NULL scmd)->status -> crash at offset 0x228
The offset 0x228 = sizeof(struct scsi_cmnd) 0x220 + offsetof(status)
0x8.
This issue was observed on PERC H330 Mini running firmware 25.5.9.0001
after 3+ days of heavy I/O load.
Crash signature:
BUG: unable to handle kernel NULL pointer dereference at 0x228
RIP: complete_cmd_fusion+0x428
Function: megasas_priv(cmd_fusion->scmd)->status
Add defensive check to skip processing when scmd_local is NULL. This
handles duplicate completions from firmware and prevents accessing freed
command structures. The check protects all scmd_local uses in both the
SCSI_IO path and the fallthrough LDIO path.
Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com>
Link: https://patch.msgid.link/agWAgtk6rtHqNWb5@machine1
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The extremely slow boots reported July 2014 in bug 79901:
https://bugzilla.kernel.org/show_bug.cgi?id=79901
for Promise VTrak E610f 3U 16-bay FC RAID enclosure occur also with the
Promise VTrak E310f 2U 12-bay FC RAID enclosure. The 2014 patch:
https://bugzilla.kernel.org/attachment.cgi?id=144101&action=diff
added support for the BLIST_NO_RSOC flag and specified that flag for the
Promise VTrak E610f. This current patch simply adds the E310f to that
same list.
One curiosity is the additional BLIST_SPARSELUN flag. This was also in
the 2014 patch for the E610f, and was already in place for *all* Promise
devices since 2007 due to commit e0b2e597d5 ("[SCSI] stex: fix id
mapping issue") which added the line:
{"Promise", "", NULL, BLIST_SPARSELUN}
The 2007 commit message talks of issues with SuperTrak EX (stex) but the
added line did not limit itself to that particular device family. The
current patch for E310F, like the 2014 patch for E610f, adds
BLIST_NO_RSOC while preserving BLIST_SPARSELUN from 2007.
Signed-off-by: Alexander Perlis <aperlis@math.lsu.edu>
Suggested-by: Nikkos Svoboda <nsvoboda@math.lsu.edu>
Link: https://patch.msgid.link/20260512231254.27530-1-aperlis@math.lsu.edu
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not
set the requeue list for a requeued command to be kicked in the future.
The expectation is a call to scsi_run_host_queues() will kick all SCSI
devices once the recovery state is cleared.
However, scsi_run_host_queues() uses shost_for_each_device() which uses
scsi_device_get() and so will ignore devices in a partially removed
state like SDEV_CANCEL. But these devices may also have requeued
requests, leaving their requests stuck from not being kicked and causing
the removal process of the device to hang.
scsi_run_host_queues() needs to run against more devices than the macro
shost_for_each_device() allows. Instead of using the too limiting
scsi_device_get() state checks, only ignore devices in SDEV_DEL state or
when unable to acquire a reference. Attempt to run the queues for all
other devices when scsi_run_host_queues() is called.
Fixes: 8b566edbdb ("scsi: core: Only kick the requeue list if necessary")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260515180941.9698-1-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mirror iucv_sock_setsockopt() and wrap the whole switch in
lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock
becomes redundant and is removed.
Any AF_IUCV HIPER user can potentially crash the kernel by racing
recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences
iucv->hs_dev->mtu after iucv_sock_close() (called from the racing
recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference
oops.
Suggested-by: Stanislav Fomichev <sdf.kernel@gmail.com>
Fixes: 51363b8751 ("af_iucv: allow retrieval of maximum message size")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Tested-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20260521-af_iucv_fix2-v1-1-f16b1c510aa9@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(),
proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht
being reset even though hash entries already exist and are being used,
possibly resulting in a corrupted list.
Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in
smc_init(); it is implicitly initialised to zero anyhow. Add
HLIST_HEAD_INIT to the definitions for clarity.
Fixes: f16a7dd5cf ("smc: netlink interface for SMC sockets")
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20260521145639.10317-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ilya Maximets says:
====================
netlink: fixes for cross-namespace nsid reporting
While working on some new features for OVS and OVN we discovered that
self-referential NSIDs get unintentionally allocated in the system as
well as unexpectedly reported for local events on all-nsid listeners.
More details in the patches. They change user-visible behavior, but
the current behavior is arguably a bug, as it makes it hard to use
all-nsid sockets without a decent amount of extra unrelated work of
tracking when new NSIDs are allocated for your local namespace.
Tests are added to check the expected behavior and YNL is extended
to support all-nsid sockets in the tests.
====================
Link: https://patch.msgid.link/20260520172317.175168-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test subscribes to link events from all namespaces and makes
sure that local events do not carry NSID in their ancillary data
(even if there is a self-referential NSID allocated for the local
namespace), and remote events do.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260520172317.175168-5-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In most cases, notifications on sockets with NETLINK_LISTEN_ALL_NSID
do not contain NSID in their ancillary data in case the event is local
to the listener.
However, when a self-referential NSID is allocated for a namespace,
every local notification starts sending this ID to the user space.
This is problematic, because the listener cannot tell if those
notifications are local or not anymore without making extra requests
to figure out if the provided NSID is local or not. The listener
can also not figure out the local NSID beforehand as it can be
allocated at any point in time by other processes, changing the
structure of the future notifications for everyone.
The value is practically not useful, since it's the namespace's own
ID that the application has to obtain from other sources in order to
figure out if it's the same or not. So, for the application it's
just an extra busy work with no benefits. Moreover, applications
that do not know about this quirk may be mishandling notifications
with NSID set as notifications from remote namespaces. This is the
case for ovs-vswitchd and the iproute2's 'ip monitor' that stops
printing 'current' and starts printing the nsid number mid-session.
Lack of clear documentation for this behavior is also not helping.
A search though open-source projects doesn't reveal any projects
that use NETNSA_NSID_NOT_ASSIGNED and rely on metadata to contain
self-referential NSIDs (expected, since the value is not useful).
Quite the opposite, as already mentioned, there are few applications
that rely on NSID to not be present in local events.
Since the value is not useful and actively harmful in some cases,
let's not report it for local events, making the notifications more
consistent.
Also adding some blank lines for readability.
Fixes: 59324cf35a ("netlink: allow to listen "all" netns")
Reported-by: Matteo Perin <matteo.perin@canonical.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260520172317.175168-3-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the current skb is not shared, it is re-used directly for all the
sockets subscribed to the notification. If we have remote all-nsid
socket receiving a message first, then the 'nsid_is_set' will be
set to 'true'. If the nsid is NOT_ASSIGNED for the next socket in
the list, the 'nsid_is_set' will remain 'true' and the negative value
is be delivered to the user space. All subsequent nsid values will be
delivered as well, since there is no code path that sets the flag
back to 'false'.
Fix that by always dropping the flag to 'false' first.
Fixes: 7212462fa6 ("netlink: don't send unknown nsid")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260520172317.175168-2-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Spurious WARN in ops_dequeue() racing with concurrent dispatch.
- Self-deadlock between scheduler disable and a concurrent sub-sched
enable.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCahCHGQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGdKOAP9C6xYbZSXuPJSugQg7Ogq7GTcMf0EtK7CGVb9x
0pVJigEA1E17Vqf1WTWTp2DOsoPV1adS51wcoTGvklJc0eFRrw0=
=i40E
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Spurious WARN in ops_dequeue() racing with concurrent dispatch
- Self-deadlock between scheduler disable and a concurrent sub-sched
enable
* tag 'sched_ext-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix spurious WARN on stale ops_state in ops_dequeue()
sched_ext: Fix deadlock between scx_root_disable() and concurrent forks
When x2AVIC is enabled, disable WRMSR interception only for MSRs that are
actually accelerated by hardware. Disabling interception for MSRs that
aren't accelerated is functionally "fine", and in some cases a weird "win"
for performance, but only for cases that should never be triggered by a
well-behaved VM (writes to read-only registers; the #GP will typically
occur in the guest without taking a #VMEXIT, even for fault-like exits).
But overall, disabling interception for MSRs that aren't accelerated is at
best confusing and unintuitive, and at worst introduces avoidable risk, as
the APM's documentation is imperfect and contradictory. The table in
"15.29.3.1 Virtual APIC Register Accesses" of simply states that such
writes generate exits, where as "Section 15.29.10 x2AVIC" says:
x2APIC MSR intercept checks and access checks have higher priority than
AVIC access permission checks.
CPU behavior follows the latter (which makes perfect sense), but all in
all there's simply no reason to disable interception just to make a #GP
faster.
Note, the set of MSRs that are passed through for write is identical to
VMX's set when IPI virtualization is enabled. This is not a coincidence,
and is another motiviating factor for cleaning up the intercepts, as x2AVIC
is functionally equivalent to APICv+IPIv.
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://patch.msgid.link/20260514213115.1637082-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Two rstat fixes:
- Out-of-bounds access in the css_rstat_updated() BPF kfunc when called
with an unchecked user-supplied cpu.
- Over-strict NMI guard after the recent switch to try_cmpxchg left
sparc and ppc64 unable to queue rstat updates from NMI.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCahCHDA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGTk2AP9Me+BV0h17oEuaqAii7uzMom6zCYUO6KY6ADAe
zr+zcgEA0B72FxH+GyPwe7lhropwg9WR6jagsCFN/tlMPHwQrwc=
=Sos7
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Two rstat fixes:
- Out-of-bounds access in the css_rstat_updated() BPF kfunc when
called with an unchecked user-supplied cpu
- Over-strict NMI guard after the recent switch to try_cmpxchg left
sparc and ppc64 unable to queue rstat updates from NMI"
* tag 'cgroup-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: rstat: relax NMI guard after switch to try_cmpxchg
cgroup/rstat: validate cpu before css_rstat_cpu() access
When toggling x2AVIC on/off, use KVM's curated mask of x2APIC MSRs that
can/should be passed through to the guest (or not) when 2AVIC is enabled.
Using the effective list provided by the local APIC emulation fixes
multiple (classes of) bugs, as the existing hand-coded list of MSRs is
wrong on multiple fronts:
- ARBPRI isn't supported by KVM, isn't accelerated by AVIC (for read or
write), and its #VMEXIT is fault-like, i.e. requires decoding the
instruction. Disabling interception is nonsensical and suboptimal.
- DFR and ICR2 aren't supported by x2APIC and so don't need their
intercepts disabled for performance reasons. While the #GP due to
x2APIC being abled has higher priority than the trap-like #VMEXIT,
disabling interception of unsupported MSRs is confusing and unnecessary.
- RRR is completely unsupported.
- AVIC currently fails to pass through the "range of vectors" registers,
IRR, ISR, and TMR, as e.g. X2APIC_MSR(APIC_IRR) only affects IRR0, and
thus only disables intercept for vectors 31:0 (which are the *least*
interesting registers).
- TMCCT (the current APIC timer count) isn't accelerated by hardware, and
generates a fault-like AVIC_UNACCELERATED_ACCESS #VMEXIT, i.e. requires
KVM to decode the instruction to figure out what the guest was trying to
access. Note, the only reason this isn't a fatal bug is that the AVIC
architecture had the foresight to guard against buggy hypervisors. E.g.
if hardware simply read from the virtual APIC page, the guest would get
garbage (because the timer is emulated in software).
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://patch.msgid.link/20260514213115.1637082-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a dedicated local APIC API, kvm_x2apic_disable_intercept_reg_mask(),
to provide the mask of x2APIC registers whose MSRs can and should be passed
through to the guest when x2APIC virtualization is enable, and use it in
lieu of the open-coded equivalent VMX logic. Providing a common helper
will allow sharing the logic with SVM (x2AVIC), and as a bonus eliminates
the somewhat confusing code where KVM enables interception for MSR_TYPE_RW,
even though only the READ case actually needs to be updated.
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://patch.msgid.link/20260514213115.1637082-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Small fixes, two in drivers and the remaining a sign conversion probem in sd
with no user visible consequences (non-zero is error).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCahCGHxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIX6/wD8DDul4OL9k/6NvnhX93V4yt5yEVUKwyLi
71sI1y8Y9UIA/R+0OPRjl6z4KOZaMPZqLIQFLOAweVsHpXAQ20IrPcuU
=7Y5a
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small fixes, two in drivers and the remaining a sign conversion probem
in sd with no user visible consequences (non-zero is error)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: tcm_loop: Fix NULL ptr dereference
scsi: isci: Fix use-after-free in device removal path
scsi: sd: Fix return code handling in sd_spinup_disk()
Fixes and New HW Support
- Add ACPI_HANDLE()/ACPI_COMPANION() NULL checks (many drivers) to
handle match overrides gracefully
- asus-armoury:
- Fix mini-LED mode get/set
- Add support for FA401EA, FX607VU, G614FR, and GU605CP
- bitland-mifs-wmi: Add CONFIG_LEDS_CLASS dependency
- hp-wmi: Add thermal support for Omen 16-c0xxx (board 8902)
- intel/vsec: Fix enable_cnt imbalance due to PCIe error recovery
- surface/aggregator_registry: Remove battery & AC nodes on Surface
Laptop 7 to avoid duplicated devices
- uniwill-laptop:
- Handle uninitialized and invalid charging threshold values
- Accept charging threshold of 0 through power supply sysfs ABI and
clamp it to 1
- Make 'force' parameter to work also when device descriptor is found
- Do not enable charging limit despite the 'force' parameter to avoid
permanent damage to battery
The following is an automated shortlog grouped by driver:
acer-wireless:
- Check ACPI_COMPANION() against NULL
adv_swbutton:
- Check ACPI_HANDLE() against NULL
asus-armoury:
- add support for FA401EA
- add support for FX607VU
- add support for G614FR
- add support for GU605CP
- fix mini-LED mode get/set on MODE2 devices
asus-laptop:
- Check ACPI_COMPANION() against NULL
bitland-mifs-wmi:
- add CONFIG_LEDS_CLASS dependency
dell/dell-rbtn:
- Check ACPI_COMPANION() against NULL
eeepc-laptop:
- Check ACPI_COMPANION() against NULL
fujitsu:
- Check ACPI_COMPANION() against NULL
fujitsu-tablet:
- Check ACPI_COMPANION() against NULL
hp_accel:
- Check ACPI_COMPANION() against NULL
hp-wmi:
- fix support for thermal profile Omen 16-с0xxx laptops
intel-hid:
- Check ACPI_HANDLE() against NULL
intel/rst:
- Check ACPI_COMPANION() against NULL
intel_sar:
- Check ACPI_HANDLE() against NULL
intel/smartconnect:
- Check ACPI_HANDLE() against NULL
intel-vbtn:
- Check ACPI_HANDLE() against NULL
intel/vsec:
- Fix enable_cnt imbalance on PCIe error recovery
lg-laptop:
- Check ACPI_COMPANION() against NULL
panasonic-laptop:
- Check ACPI_COMPANION() against NULL
sony-laptop:
- Check ACPI_COMPANION() against NULL
surface: aggregator_registry:
- omit battery & AC nodes on Surface Laptop 7
surface: surfacepro3_button:
- Check ACPI_COMPANION()
system76:
- Check ACPI_COMPANION() against NULL
toshiba_acpi:
- Check ACPI_COMPANION() against NULL
toshiba_bluetooth:
- Check ACPI_COMPANION() against NULL
toshiba_haps:
- Check ACPI_COMPANION() against NULL
uniwill-laptop:
- Accept charging threshold of 0
- Do not enable the charging limit even when forced
- Fix behavior of "force" module param
- Properly initialize charging threshold
wireless-hotkey:
- Check ACPI_COMPANION() against NULL
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCahBSaQAKCRBZrE9hU+XO
MXuOAQDhdhmEHMF6DLGsS1oYVgRmLe+JTH7sC+j4GX7EXzdKYQEAtBWYBsVl6FXF
2ICXDIIg1nUX4L8Ilr5pqnC4qYYLQAM=
=rdI2
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from
- Add ACPI_HANDLE()/ACPI_COMPANION() NULL checks (many drivers) to
handle match overrides gracefully
- asus-armoury:
- Fix mini-LED mode get/set
- Add support for FA401EA, FX607VU, G614FR, and GU605CP
- bitland-mifs-wmi:
- Add CONFIG_LEDS_CLASS dependency
- hp-wmi:
- Add thermal support for Omen 16-c0xxx (board 8902)
- intel/vsec:
- Fix enable_cnt imbalance due to PCIe error recovery
- surface/aggregator_registry:
- Remove battery & AC nodes on Surface Laptop 7 to avoid duplicated
devices
- uniwill-laptop:
- Handle uninitialized and invalid charging threshold values
- Accept charging threshold of 0 through power supply sysfs ABI and
clamp it to 1
- Make 'force' parameter to work also when device descriptor is
found
- Do not enable charging limit despite the 'force' parameter to
avoid permanent damage to battery
* tag 'platform-drivers-x86-v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (35 commits)
platform/x86: bitland-mifs-wmi: add CONFIG_LEDS_CLASS dependency
platform/x86: wireless-hotkey: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_haps: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_bluetooth: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_acpi: Check ACPI_COMPANION() against NULL
platform/x86: system76: Check ACPI_COMPANION() against NULL
platform/x86: sony-laptop: Check ACPI_COMPANION() against NULL
platform/x86: panasonic-laptop: Check ACPI_COMPANION() against NULL
platform/x86: lg-laptop: Check ACPI_COMPANION() against NULL
platform/x86: intel/smartconnect: Check ACPI_HANDLE() against NULL
platform/x86: intel/rst: Check ACPI_COMPANION() against NULL
platform/x86: fujitsu-tablet: Check ACPI_COMPANION() against NULL
platform/x86: fujitsu: Check ACPI_COMPANION() against NULL
platform/x86: eeepc-laptop: Check ACPI_COMPANION() against NULL
platform/x86: dell/dell-rbtn: Check ACPI_COMPANION() against NULL
platform/x86: asus-laptop: Check ACPI_COMPANION() against NULL
platform/x86: acer-wireless: Check ACPI_COMPANION() against NULL
platform/x86: asus-armoury: add support for GU605CP
platform/x86: asus-armoury: add support for FA401EA
platform/x86: asus-armoury: add support for G614FR
...
Another batch of driver fixes from Johan fixing error handling paths,
plus another from Felix. We also have a new device ID added in the DT
bindings for SpacemiT K3.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmoQOJYACgkQJNaLcl1U
h9Cv9AgAg9YV8hoCA8qMNcIurXXnaaJ8+SU2zqOdN9fuHMuxFCnxY+J4xjp1V5b6
waIJxCFX6qqPMEAzmJrqWkGyJtcE2B3sGioJ++mmNWVAJOwbc8/4QWbQyZHdyvuS
Zk/NjdAV7BOC30CAO6DfVGi4rXCZEA3ul8I+qCQYl9KOnu8j5tQTVbhZijC9MHBG
YG+e7stFnx44Psl/IiGvlbVvG6AUi3whlMkX7ep0aeGnz6/g1IVyGty0cMaWlW8K
8DXOlzmDoCTKLdlqAHO5sN063nA/3utjkFzoTZ98THvsL2vaQnNWxZI1bxyfhG45
xZAPcx4Q9DTm/REyZnja19E1x6+wsQ==
=qdyL
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Another batch of driver fixes from Johan fixing error handling paths,
plus another from Felix. We also have a new device ID added in the DT
bindings for SpacemiT K3"
* tag 'spi-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: fsl-qspi: support SpacemiT K3
spi: ti-qspi: fix use-after-free after DMA setup failure
spi: sprd: fix error pointer deref after DMA setup failure
spi: qup: fix error pointer deref after DMA setup failure
spi: mtk-snfi: Fix resource leak in mtk_snand_read_page_cache()
spi: ep93xx: fix error pointer deref after DMA setup failure
