drm/i915 features for v5.11:
Highlights:
- Enable big joiner to join two pipes to one port to overcome pipe restrictions
(Manasi, Ville, Maarten)
Display:
- More DG1 enabling (Lucas, Aditya)
- Fixes to cases without display (Lucas, José, Jani)
- Initial PSR state improvements (José)
- JSL eDP vswing updates (Tejas)
- Handle EDID declared max 16 bpc (Ville)
- Display refactoring (Ville)
Other:
- GVT features
- Backmerge
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87czzzkk1s.fsf@intel.com
The current interface of intel_gvt_register_hypervisor() expects a
non-const pointer to struct intel_gvt_mpt, even though the mediator
never modifies (or should modifiy) the content of this struct.
Change the function signature and relevant struct members to const to
properly express the API's intent and allow instances of intel_gvt_mpt
to be allocated as const.
While I was here, I also made KVM's instance of this struct const to
reduce the number of writable function pointers in the kernel.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201111172811.558443-1-julian.stecklina@cyberus-technology.de
For DG1 we have a little of mix up wrt to DDI/port names and indexes.
Bspec refers to the ports as DDIA, DDIB, DDI USBC1 and DDI USBC2
(besides the DDIA, DDIB, DDIC, DDID), but the previous naming is the
most unambiguous one. This means that for any register on Display Engine
we should use the index of A, B, D and E. However in some places this is
not true:
- VBT: uses C and D and have to be mapped to D/E
- IO/Combo: uses C and D, but we already differentiate those when
we created the phy vs port distinction.
This additional mapping for VBT and phy are already covered in previous
patches, so now we can initialize all the DDIs as A, B, D and E.
v2: Squash previous patch enabling just ports A and B since most of the
pumbling code is already merged now
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117084836.2318234-1-lucas.demarchi@intel.com
After having written the entire OA buffer with reports, the HW will
write again at the beginning of the OA buffer. It'll indicate it by
setting the WRAP bits in the OASTATUS register.
When a wrap happens and that at the end of the read vfunc we write the
OASTATUS register back to clear the REPORT_LOST bit, we sometimes see
that the OATAILPTR register is reset to a previous position on Gen8/9
(apparently not the case on Gen11+). This leads the next call to the
read vfunc to process reports we've already read. Because we've marked
those as read by clearing the reason & timestamp dwords, they're
discarded and a "Skipping spurious, invalid OA report" message is
emitted.
The workaround to avoid this OATAILPTR value reset seems to be to set
the wrap bits when writing back OASTATUS.
This change has no impact on userspace, it only avoids a bunch of
DRM_NOTE("Skipping spurious, invalid OA report\n") messages.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 19f81df285 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117130124.829979-1-lionel.g.landwerlin@intel.com
We can't call drm_plane_state_src() this late for the slave plane since
it would consult the wrong uapi state. We've alreayd done the correct
uapi->hw copy earlier, so let's just preserve the unclipped src/dst
rects using a temp copy across the intel_atomic_plane_check_clipping()
call.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-14-manasi.d.navare@intel.com
Dump debugfs and planar links as well, this will make it easier to debug
when things go wrong.
v4:
* Rebase
Changes since v1:
- Report planar slaves as such, now that we have the plane_state switch.
Changes since v2:
- Rebase on top of the new plane format dumping
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-12-manasi.d.navare@intel.com
We need to look at hw.fb for the framebuffer, and add the translation
for the slave_plane_state. With these changes we set the correct
rectangle on the bigjoiner slave, and don't set incorrect
src/dst/visibility on the slave plane.
v2:
* Manual rebase (Manasi)
v3:
* hw.rotation instead of uapi.rotation (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-11-manasi.d.navare@intel.com
When using bigjoiner userspace is only controlling the "master"
plane, so use its uapi state for the "slave" plane as well.
hw.crtc needs a bit of magic since we don't want to copy that from
the uapi state (as it points to the wrong pipe for the "slave
" plane). Instead we pass the right crtc in explicitly but only
assign it when the uapi state indicates the plane to be logically
enabled (ie. uapi.crtc != NULL).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-10-manasi.d.navare@intel.com
Make sure both the bigjoiner "master" and "slave" plane are
in the state whenever either of them is in the state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-9-manasi.d.navare@intel.com
Skip iterating over bigjoiner slaves, only the master has the state we
care about.
Add the width of the bigjoiner slave to the reconstructed fb.
Hide the bigjoiner slave to userspace, and double the mode on bigjoiner
master.
And last, disable bigjoiner slave from primary if reconstruction fails.
v3:
* Fix the ddi_get_config slave error (Ankit Nautiyal)
v2:
* Unsupported bigjoiner config for initial fb (Ville)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* Don't do any hw->uapi state copy for bigjoiner slave
* We still have hw.mode so no need to pass it in
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-7-manasi.d.navare@intel.com
Enabling is done in a special sequence and so should plane updates
be. Ideally the end user never notices the second pipe is used.
This way ideally everything will be tear free, and updates are
really atomic as userspace expects it.
This uses generic modeset_enables() calls like trans port sync
but still has special handling for disable since for slave we
should not disable things like encoder, plls that are not enabled
for slave.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala: Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-6-manasi.d.navare@intel.com
Make vdsc work when no output is enabled. The big joiner needs VDSC
on the slave, so enable it and set the appropriate bits.
So remove encoder usage from dsc functions.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-5-manasi.d.navare@intel.com
When the clock is higher than the dotclock, try with 2 pipes enabled.
If we can enable 2, then we will go into big joiner mode, and steal
the adjacent crtc.
This only links the crtc's in software, no hardware or plane
programming is done yet. Blobs are also copied from the master's
crtc_state, so it doesn't depend at commit time on the other
crtc_state.
v6:
* Enable dSC for any mode->hdisplay > 5120
v5:
* Remove intel_dp_max_dotclock (Manasi)
v4:
* Fixes in intel_crtc_compute_config (Ville)
v3:
* Manual Rebase (Manasi)
Changes since v1:
- Rename pipe timings to transcoder timings, as they are now different.
Changes since v2:
- Rework bigjoiner checks; always disable slave when recalculating
master. No need to have a separate bigjoiner pass any more.
- Use pipe_mode instead of transcoder_mode, to clean up the code.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* hskew isn't a thing
* Do the dsc compute if bigjoiner is enabled, not the other way around]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-4-manasi.d.navare@intel.com
Small changes to intel_dp_mode_valid(), allow listing modes that
can only be supported in the bigjoiner configuration, which is
not supported yet.
v13:
* Allow bigjoiner if hdisplay >5120
v12:
* slice_count logic simplify (Ville)
* Fix unnecessary changes in downstream_mode_valid (Ville)
v11:
* Make intel_dp_can_bigjoiner non static
so it can be used in intel_display (Manasi)
v10:
* Simplify logic (Ville)
* Allow bigjoiner on edp (Ville)
v9:
* Restric Bigjoiner on PORT A (Ville)
v8:
* use source dotclock for max dotclock (Manasi)
v7:
* Add can_bigjoiner() helper (Ville)
* Pass bigjoiner to plane_size validation (Ville)
v6:
* Rebase after dp_downstream mode valid changes (Manasi)
v5:
* Increase max plane width to support 8K with bigjoiner (Maarten)
v4:
* Rebase (Manasi)
Changes since v1:
- Disallow bigjoiner on eDP.
Changes since v2:
- Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
and split off the downstream and source checking to its own function.
(Ville)
v3:
* Rebase (Manasi)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[vsyrjala:
* Keep bigjoiner disabled until everything is ready
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-3-manasi.d.navare@intel.com
When doing the plane state copy from the UV plane to the Y plane
let's just copy the hw state directly instead of using the original
uapi state. The UV plane has already had its uapi state copied into
its hw state, so this extra detour via the uapi state for the Y plane
is pointless.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-2-manasi.d.navare@intel.com
I totally fumbled the ?: usage when generating the DDI encoder
names. Reverse the things that need reversing, and to make it
a bit less messy add a few macros to hide the arithmetic on the
port enums.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: 2d709a5a62 ("drm/i915: Give DDI encoders even better names")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117154028.8516-1-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
In the macro for_each_oldnew_crtc_in_state() 'crtc_state' is provided
as a container for state->crtcs[i].new_state, but is not utilised in
some use-cases, so we fake-use it instead.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/imx/ipuv3-plane.c: In function ‘ipu_planes_assign_pre’:
drivers/gpu/drm/imx/ipuv3-plane.c:746:42: warning: variable ‘crtc_state’ set but not used [-Wunused-but-set-variable]
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-43-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vc4/vc4_debugfs.c:25: warning: Function parameter or member 'minor' not described in 'vc4_debugfs_init'
drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'dev' not described in 'vc4_debugfs_add_file'
drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'name' not described in 'vc4_debugfs_add_file'
drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'show' not described in 'vc4_debugfs_add_file'
drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'data' not described in 'vc4_debugfs_add_file'
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-41-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vc4/vc4_v3d.c:131: warning: Function parameter or member 'vc4' not described in 'vc4_v3d_pm_get'
drivers/gpu/drm/vc4/vc4_v3d.c:231: warning: Function parameter or member 'vc4' not described in 'bin_bo_alloc'
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-40-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_set_audio_infoframe’:
drivers/gpu/drm/vc4/vc4_hdmi.c:334:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-39-lee.jones@linaro.org
The alternative is to move them into the source file that uses then,
but they are large and intrusive, so that strategy is being avoided.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vc4/vc4_hdmi_regs.h:282:39: warning: ‘vc5_hdmi_hdmi1_fields’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/vc4/vc4_hdmi_regs.h:206:39: warning: ‘vc5_hdmi_hdmi0_fields’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/vc4/vc4_hdmi_regs.h:145:39: warning: ‘vc4_hdmi_fields’ defined but not used [-Wunused-const-variable=]
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-38-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/v3d/v3d_sched.c:75: warning: Function parameter or member 'sched_job' not described in 'v3d_job_dependency'
drivers/gpu/drm/v3d/v3d_sched.c:75: warning: Function parameter or member 's_entity' not described in 'v3d_job_dependency'
Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-37-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/v3d/v3d_gem.c:292: warning: Function parameter or member 'bo_handles' not described in 'v3d_lookup_bos'
drivers/gpu/drm/v3d/v3d_gem.c:292: warning: Function parameter or member 'bo_count' not described in 'v3d_lookup_bos'
Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-36-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/v3d/v3d_drv.c:73:32: warning: ‘v3d_v3d_pm_ops’ defined but not used [-Wunused-const-variable=]
Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-35-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/ttm/ttm_tt.c:45: warning: Function parameter or member 'bo' not described in 'ttm_tt_create'
drivers/gpu/drm/ttm/ttm_tt.c:45: warning: Function parameter or member 'zero_alloc' not described in 'ttm_tt_create'
drivers/gpu/drm/ttm/ttm_tt.c:83: warning: Function parameter or member 'ttm' not described in 'ttm_tt_alloc_page_directory'
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-33-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/ttm/ttm_range_manager.c:46: warning: cannot understand function prototype: 'struct ttm_range_manager '
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-34-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/ttm/ttm_bo.c:51: warning: Function parameter or member 'ttm_global_mutex' not described in 'DEFINE_MUTEX'
drivers/gpu/drm/ttm/ttm_bo.c:286: warning: Function parameter or member 'bo' not described in 'ttm_bo_cleanup_memtype_use'
drivers/gpu/drm/ttm/ttm_bo.c:359: warning: Function parameter or member 'bo' not described in 'ttm_bo_cleanup_refs'
drivers/gpu/drm/ttm/ttm_bo.c:359: warning: Function parameter or member 'interruptible' not described in 'ttm_bo_cleanup_refs'
drivers/gpu/drm/ttm/ttm_bo.c:359: warning: Function parameter or member 'no_wait_gpu' not described in 'ttm_bo_cleanup_refs'
drivers/gpu/drm/ttm/ttm_bo.c:359: warning: Function parameter or member 'unlock_resv' not described in 'ttm_bo_cleanup_refs'
drivers/gpu/drm/ttm/ttm_bo.c:424: warning: Function parameter or member 'bdev' not described in 'ttm_bo_delayed_delete'
drivers/gpu/drm/ttm/ttm_bo.c:424: warning: Function parameter or member 'remove_all' not described in 'ttm_bo_delayed_delete'
drivers/gpu/drm/ttm/ttm_bo.c:635: warning: Function parameter or member 'bo' not described in 'ttm_bo_evict_swapout_allowable'
drivers/gpu/drm/ttm/ttm_bo.c:635: warning: Function parameter or member 'ctx' not described in 'ttm_bo_evict_swapout_allowable'
drivers/gpu/drm/ttm/ttm_bo.c:635: warning: Function parameter or member 'locked' not described in 'ttm_bo_evict_swapout_allowable'
drivers/gpu/drm/ttm/ttm_bo.c:635: warning: Function parameter or member 'busy' not described in 'ttm_bo_evict_swapout_allowable'
drivers/gpu/drm/ttm/ttm_bo.c:769: warning: Function parameter or member 'bo' not described in 'ttm_bo_add_move_fence'
drivers/gpu/drm/ttm/ttm_bo.c:769: warning: Function parameter or member 'man' not described in 'ttm_bo_add_move_fence'
drivers/gpu/drm/ttm/ttm_bo.c:769: warning: Function parameter or member 'mem' not described in 'ttm_bo_add_move_fence'
drivers/gpu/drm/ttm/ttm_bo.c:769: warning: Function parameter or member 'no_wait_gpu' not described in 'ttm_bo_add_move_fence'
drivers/gpu/drm/ttm/ttm_bo.c:806: warning: Function parameter or member 'bo' not described in 'ttm_bo_mem_force_space'
drivers/gpu/drm/ttm/ttm_bo.c:806: warning: Function parameter or member 'place' not described in 'ttm_bo_mem_force_space'
drivers/gpu/drm/ttm/ttm_bo.c:806: warning: Function parameter or member 'mem' not described in 'ttm_bo_mem_force_space'
drivers/gpu/drm/ttm/ttm_bo.c:806: warning: Function parameter or member 'ctx' not described in 'ttm_bo_mem_force_space'
drivers/gpu/drm/ttm/ttm_bo.c:872: warning: Function parameter or member 'bo' not described in 'ttm_bo_mem_space'
drivers/gpu/drm/ttm/ttm_bo.c:872: warning: Function parameter or member 'placement' not described in 'ttm_bo_mem_space'
drivers/gpu/drm/ttm/ttm_bo.c:872: warning: Function parameter or member 'mem' not described in 'ttm_bo_mem_space'
drivers/gpu/drm/ttm/ttm_bo.c:872: warning: Function parameter or member 'ctx' not described in 'ttm_bo_mem_space'
drivers/gpu/drm/ttm/ttm_bo.c:1387: warning: Function parameter or member 'ctx' not described in 'ttm_bo_swapout'
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-32-lee.jones@linaro.org
There is too much data being stored on the stack.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c: In function ‘sideband_msg_req_encode_decode’:
drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c:168:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-31-lee.jones@linaro.org
The stack is too full.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c: In function ‘sideband_msg_req_encode_decode’:
drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c:161:1: warning: the frame size of 1176 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Francis <David.Francis@amd.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-30-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/selftests/test-drm_framebuffer.c: In function ‘execute_drm_mode_fb_cmd2’:
drivers/gpu/drm/selftests/test-drm_framebuffer.c:333:26: warning: variable ‘fb’ set but not used [-Wunused-but-set-variable]
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-29-lee.jones@linaro.org
In the macro drm_mm_for_each_hole() 'hole_end' is provided as a
container for 'hole_start + pos->hole_size', but is not utilised in
this use-case. We cannot simply delete the variable, so here we tell
the compiler that we're intentionally discarding the read value.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/selftests/test-drm_mm.c: In function ‘assert_no_holes’:
drivers/gpu/drm/selftests/test-drm_mm.c:57:18: warning: variable ‘hole_end’ set but not used [-Wunused-but-set-variable]
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nirmoy Das <nirmoy.aiemd@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-28-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:357: warning: Function parameter or member 'dsi' not described in 'ns2bc'
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:357: warning: Function parameter or member 'ns' not described in 'ns2bc'
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:365: warning: Function parameter or member 'dsi' not described in 'ns2ui'
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:365: warning: Function parameter or member 'ns' not described in 'ns2ui'
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Zhong <zyw@rock-chips.com>
Cc: Nickey Yang <nickey.yang@rock-chips.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-25-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/pl111/pl111_debugfs.c:33:5: warning: no previous prototype for ‘pl111_debugfs_regs’ [-Wmissing-prototypes]
Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-24-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/pl111/pl111_display.c:356:6: warning: no previous prototype for ‘pl111_display_disable’ [-Wmissing-prototypes]
Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-23-lee.jones@linaro.org
... and demote non-conformant kernel-doc header.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/nouveau/nvkm/core/firmware.c:71: warning: Function parameter or member 'subdev' not described in 'nvkm_firmware_get'
drivers/gpu/drm/nouveau/nvkm/core/firmware.c:71: warning: Function parameter or member 'fwname' not described in 'nvkm_firmware_get'
drivers/gpu/drm/nouveau/nvkm/core/firmware.c:71: warning: Function parameter or member 'ver' not described in 'nvkm_firmware_get'
drivers/gpu/drm/nouveau/nvkm/core/firmware.c:71: warning: Function parameter or member 'fw' not described in 'nvkm_firmware_get'
drivers/gpu/drm/nouveau/nvkm/core/firmware.c:106: warning: Function parameter or member 'fw' not described in 'nvkm_firmware_put'
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-22-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/meson/meson_vclk.c:134:6: warning: no previous prototype for ‘meson_vid_pll_set’ [-Wmissing-prototypes]
drivers/gpu/drm/meson/meson_vclk.c:490:6: warning: no previous prototype for ‘meson_hdmi_pll_set_params’ [-Wmissing-prototypes]
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-15-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/meson/meson_venc.c:893:6: warning: no previous prototype for ‘meson_venc_hdmi_get_dmt_vmode’ [-Wmissing-prototypes]
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-14-lee.jones@linaro.org
