We have drm_crtc_vblank_crtc() to get the struct drm_vblank_crtc pointer
for a crtc. Use it instead of poking at dev->vblank[] directly.
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/5157c2e927676aad75348855cf7b6745cba90003.1762513240.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have drm_crtc_vblank_crtc() to get the struct drm_vblank_crtc pointer
for a crtc. Use it instead of poking at dev->vblank[] directly.
Cc: Jyri Sarha <jyri.sarha@iki.fi>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patch.msgid.link/ffd5ebe03391b3c01e616c0c844a4b8ddecede36.1762513240.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Document support for the DU IP found on the Renesas RZ/V2N (R9A09G056) SoC.
The DU IP is functionally identical to that on the RZ/V2H(P) SoC, so no
driver changes are needed. The existing `renesas,r9a09g057-du` compatible
will be used as a fallback for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251023213350.681602-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Rename irq_polling_work to qaic_irq_polling_work to reduce ambiguity
and avoid potential naming conflicts in the future.
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031192511.3179130-1-zachary.mckevitt@oss.qualcomm.com
After subsystem of the device has crashed it sends a message with
command DEBUG_TRANSFER_INFO to kernel(host). Send ACK for that message
and then prepare to collect the ramdump of the subsystem
Steps of crashdump collection is as follows,
1) Device sends DEBUG_TRANSFER_INFO message indicating that device wants
to send crashdump.
2) Send an acknowledgment to that message either ACK or NACK.
a) NACK will inform the device that host will not download the
crashdump
b) ACK will inform the device that host will download the crashdump
3) Along with the DEBUG_TRANSFER_INFO we receive a table base address and
its length, use that to download that table from device.
a) This table is meta data of the crashdump and not the actual
crashdump.
4) After we respond as ACK for message received on step 1) we start
downloading the table. Use series of MEMORY_READ/MEMORY_READ_RSP SSR
commands to download the entire table.
5) Each entry in the table represents a segment of crashdump. Once the
table downloading is complete, iterate through each entry of table
and download each crashdump segment(same as table itself). Table entry
contains the memory base address and length along with other info.
6) After the entire crashdump is downloaded send DEBUG_TRANSFER_DONE
which marks that host is terminating the crashdump transfer. This
message can be send in both success or error case.
7) After receiving DEBUG_TRANSFER_DONE_RSP hand over the crashdump to
dev_coredumpv() and free all the necessary memory.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <pkanojiy@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-4-zachary.mckevitt@oss.qualcomm.com
Subsystem restart (SSR) for a qaic device means that a NSP has crashed,
and will be restarted. However the restart process will lose any state
associated with activation, so the user will need to do some recovery.
While SSR has the provision to collect a crash dump, this patch does not
implement support for it.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Co-developed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Troy Hanson <quic_thanson@quicinc.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: Fix minor checkpatch whitespace issues]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-3-zachary.mckevitt@oss.qualcomm.com
Expose sysfs files for each DBC representing the current state of that DBC.
For example, sysfs for DBC ID 0 and accel minor number 0 looks like this,
/sys/class/accel/accel0/dbc0_state
Following are the states and their corresponding values,
DBC_STATE_IDLE (0)
DBC_STATE_ASSIGNED (1)
DBC_STATE_BEFORE_SHUTDOWN (2)
DBC_STATE_AFTER_SHUTDOWN (3)
DBC_STATE_BEFORE_POWER_UP (4)
DBC_STATE_AFTER_POWER_UP (5)
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-2-zachary.mckevitt@oss.qualcomm.com
Failing to set power off indicates an unrecoverable hardware or firmware
error. Update the driver to treat such a failure as a fatal condition
and stop further operations that depend on successful power state
transition.
This prevents undefined behavior when the hardware remains in an
unexpected state after a failed power-off attempt.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251106180521.1095218-1-lizhi.hou@amd.com
Currently, wait_event_timeout() in drm_wait_one_vblank() uses a 100ms
timeout. Under heavy scheduling pressure or rare delayed vblank
handling, this can trigger WARNs unnecessarily.
Increase the timeout to 1000ms to reduce spurious WARNs, while still
catching genuine issues.
Reported-by: syzbot+147ba789658184f0ce04@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=147ba789658184f0ce04
Tested-by: syzbot+147ba789658184f0ce04@syzkaller.appspotmail.com
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
v2:
- Dropped unnecessary in-code comment (suggested by Thomas Zimmermann)
- Removed else branch, only log timeout case
v3:
- Replaced drm_dbg_kms()/manual logging with drm_err() (suggested by Ville Syrjälä)
- Removed unnecessary curr = drm_vblank_count() (suggested by Thomas Zimmermann)
- Fixed commit message wording ("invalid userspace calls" → "delayed vblank handling")
v4:
- Keep the original drm_WARN() to catch genuine kernel issues
- Increased timeout from 100ms → 1000ms to reduce spurious WARNs (suggested by Thomas Zimmermann)
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251028034337.6341-1-chintanlike@gmail.com
In the general workqueue implementation, if a user enqueues a work item
using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq)
while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not
specified). The same applies to schedule_work() that is using system_wq
and queue_work(), that makes use again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
For more details see the Link tag below.
This continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Use the successor of system_wq, system_percpu_wq, for the scheduler's
default timeout_wq. system_wq will be removed in a few release cycles.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251106150121.256367-1-marco.crivellari@suse.com
Currently, dma_fence_put(job->fence) is called in job notification
callback. However, if a job is canceled, the notification callback is never
invoked, leading to a memory leak. Move dma_fence_put(job->fence)
to the job cleanup function to ensure the fence is always released.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251105194140.1004314-1-lizhi.hou@amd.com
The Sharp LQ116M1JW105 reports that it supports 8 bpc modes,
but it will happen display noise in some videos.
So, limit it to 6 bpc modes.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251101040043.3768848-1-ajye_huang@compal.corp-partner.google.com
Fix all kernel-doc warnings in include/uapi/drm/panfrost_drm.h.
This mostly means modifying existing comments to conform to
kernel-doc format, but there also some additions of missing
kernel-doc comments and changing non-kernel-doc comments to
use "/*" to begin them.
Warning: panfrost_drm.h:83 struct member 'jc' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'in_syncs' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'in_sync_count' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'out_sync' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'bo_handles' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'bo_handle_count' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'requirements' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'jm_ctx_handle' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'pad' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:116 Incorrect use of kernel-doc format:
* Returned offset for the BO in the GPU address space. This offset
Warning: panfrost_drm.h:124 struct member 'size' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'flags' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'handle' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'pad' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'nonzero' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:143 struct member 'handle' not described
in 'drm_panfrost_mmap_bo'
Warning: panfrost_drm.h:143 struct member 'flags' not described
in 'drm_panfrost_mmap_bo'
Warning: panfrost_drm.h:143 struct member 'offset' not described
in 'drm_panfrost_mmap_bo'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251031054152.1406764-1-rdunlap@infradead.org
Add initial support for suspend and hibernation PM callbacks to QAIC.
The device can be suspended any time in which the data path is not
busy as queued I/O operations are lost on suspension and cannot be
resumed after suspend.
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029181808.1216466-1-zachary.mckevitt@oss.qualcomm.com
The driver checks the firmware version during initialization.If preemption
is supported, the driver configures preemption accordingly and handles
userspace preemption requests. Otherwise, the driver returns an error for
userspace preemption requests.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104185340.897560-1-lizhi.hou@amd.com
Instead of doing this on the first call of the function just initialize
the stub fence during kernel load.
This has the clear advantage of lower overhead and also doesn't rely on
the ops to not be NULL any more.
v2: use correct signal function
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20251031134442.113648-3-christian.koenig@amd.com
Sort the enum: list alphabetically. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20251104135716.12497-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The rcar_du_crtc_cleanup() function has a void return type, but
incorrectly uses a return statement with a call to drm_crtc_cleanup(),
which also returns void.
Remove the return statement to ensure proper function semantics.
No functional change intended.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20251017191634.1454201-1-alok.a.tiwari@oracle.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add IOCTL debug bit for logging user provided parameter validation
errors.
Refactor several warning and error messages to better reflect fault
reason. User generated faults should not flood kernel messages with
warnings or errors, so change those to ivpu_dbg(). Add additional debug
logs for parameter validation in IOCTLs.
Check size provided by in metric streamer start and return -EINVAL
together with a debug message print.
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251104132418.970784-1-karol.wachowski@linux.intel.com
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters
that allow collection of telemetry data.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-3-lizhi.hou@amd.com
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters
that allow collection of resource data.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-2-lizhi.hou@amd.com
Add three hardware specific attributes to describe device capabilities:
hwctx_limit: The maximum number of hardware context supported.
max_tops: The maximum TOPS supported.
curr_tops: The TOPS achievable with the current power and frequency
configuration.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-1-lizhi.hou@amd.com
This is the GPU/NPU combined device found on the ST STM32MP25 SoC.
Feature bits taken from the downstream kernel driver 6.4.21.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Acked-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Link: https://patch.msgid.link/20250919183042.273687-1-marek.vasut@mailbox.org
Add a mechanism for DisplayID specific quirks, and add the first quirk
to ignore DisplayID section checksum errors.
It would be quite inconvenient to pass existing EDID quirks from
drm_edid.c for DisplayID parsing. Not all places doing DisplayID
iteration have the quirks readily available, and would have to pass it
in all places. Simply add a separate array of DisplayID specific EDID
quirks. We do end up checking it every time we iterate DisplayID blocks,
but hopefully the number of quirks remains small.
There are a few laptop models with DisplayID checksum failures, leading
to higher refresh rates only present in the DisplayID blocks being
ignored. Add a quirk for the panel in the machines.
Reported-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Closes: https://lore.kernel.org/r/CACRbrPGvLP5LANXuFi6z0S7XMbAG4X5y2YOLBDxfOVtfGGqiKQ@mail.gmail.com
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14703
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/c04d81ae648c5f21b3f5b7953f924718051f2798.1761681968.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It's more convenient to pass iter than a handful of its members to
drm_find_displayid_extension(), especially as we're about to add another
member.
Rename the function find_next_displayid_extension() while at it, to be
more descriptive.
Cc: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/3837ae7f095e77a082ac2422ce2fac96c4f9373d.1761681968.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
hyperv_drm_drv.c and hyperv_drm_modeset.c depend on drm_print.h being
indirectly included via drm_buddy.h, drm_mm.h, or
ttm/ttm_resource.h. Include drm_print.h explicitly.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20251104101158.1cc9abcd@canb.auug.org.au
Fixes: f6e8dc9edf ("drm: include drm_print.h where needed")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251104100253.646577-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
VKMS is no longer in the platform bus, instead, it is in the faux bus.
In addition, when present, IGT picks hardware drivers instead of virtual
drivers, like VKMS or vgem, if they are not forced.
Update the documentation to use IGT_FORCE_DRIVER instead of IGT_DEVICE.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20251024110014.4614-2-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The script is "run-tests.sh", no "run-test.sh".
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20251024110014.4614-1-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
These error paths free a pointer and then dereference it on the next line
to get the error code. Save the error code first and then free the
memory.
Fixes: 3e4d5b30d2 ("drm/vkms: Allow to configure multiple CRTCs via configfs")
Fixes: 2f1734ba27 ("drm/vkms: Allow to configure multiple planes via configfs")
Fixes: 67d8cf92e1 ("drm/vkms: Allow to configure multiple encoders via configfs")
Fixes: 272acbca96 ("drm/vkms: Allow to configure multiple connectors via configfs")
Fixes: 13fc9b9745 ("drm/vkms: Add and remove VKMS instances via configfs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/aPtfy2jCI_kb3Df7@stanley.mountain
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
MSG_OP_CHAIN_EXEC_NPU is a unified mailbox message that replaces
MSG_OP_CHAIN_EXEC_BUFFER_CF and MSG_OP_CHAIN_EXEC_DPU.
Add driver logic to check firmware version, and if MSG_OP_CHAIN_EXEC_NPU
is supported, uses it to submit firmware commands.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251031014700.2919349-1-lizhi.hou@amd.com
On SoCs where the GPU's power-domain is in charge of setting performance
levels, the OPP table of the GPU node will have already been populated
during said power-domain's attach_dev operation.
To avoid initialising an OPP table twice, only set the OPP regulator and
the OPPs from DT if there's no OPP table present.
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251017-mt8196-gpufreq-v8-4-98fc1cc566a1@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
As it stands, panthor keeps a cached current frequency value for when it
wants to retrieve it. This doesn't work well for when things might
switch frequency without panthor's knowledge.
Instead, implement the get_cur_freq operation, and expose it through a
helper function to the rest of panthor.
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251017-mt8196-gpufreq-v8-3-98fc1cc566a1@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The Mali-based GPU on the MediaTek MT8196 SoC uses a separate MCU to
control the power and frequency of the GPU. This is modelled as a power
domain and clock provider.
It lets us omit the OPP tables from the device tree, as those can now be
enumerated at runtime from the MCU.
Add the necessary schema logic to handle what this SoC expects in terms
of clocks and power-domains.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251017-mt8196-gpufreq-v8-1-98fc1cc566a1@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The instance of the GPU populated in i.MX95 is the G310, describe this
GPU in the DT. Include dummy GPU voltage regulator and OPP tables.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20251102160927.45157-2-marek.vasut@mailbox.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The instance of the GPU populated in Freescale i.MX95 is the
Mali G310, document support for this variant.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20251102160927.45157-1-marek.vasut@mailbox.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Some platforms, such as i.MX95, utilize multiple power domains that need
to be attached explicitly. This patch ensures that the driver properly
attaches all available power domains using devm_pm_domain_attach_list().
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@nxp.com>
Signed-off-by: Rain Yang <jiyu.yang@nxp.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251022092604.181752-1-jiyu.yang@oss.nxp.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
If the MMU is down, panthor_vm_unmap_range() might return an error.
We expect the page table to be updated still, and if the MMU is blocked,
the rest of the GPU should be blocked too, so no risk of accessing
physical memory returned to the system (which the current code doesn't
cover for anyway).
Proceed with the rest of the cleanup instead of bailing out and leaving
the va_node inserted in the drm_mm, which leads to UAF when other
adjacent nodes are removed from the drm_mm tree.
Reported-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/issues/57
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251031154818.821054-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
There is a race between panthor_device_unplug() and
panthor_device_suspend() which can lead to IRQ handlers running on a
powered down GPU. This is how it can happen:
- unplug routine calls drm_dev_unplug()
- panthor_device_suspend() can now execute, and will skip a lot of
important work because the device is currently marked as unplugged.
- IRQs will remain active in this case and IRQ handlers can therefore
try to access a powered down GPU.
The fix is simply to take the PM ref in panthor_device_unplug() a
little bit earlier, before drm_dev_unplug().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251022103242.1083311-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
A previous change, "drm/panthor: Fix UAF race between device unplug and
FW event processing", fixes a real issue where new work was unexpectedly
queued after cancellation. This was fixed by a disable instead.
Apply the same disable logic to other device level async work on device
unplug as a precaution.
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251029111412.924104-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The function panthor_fw_unplug() will free the FW memory sections.
The problem is that there could still be pending FW events which are yet
not handled at this point. process_fw_events_work() can in this case try
to access said freed memory.
Simply call disable_work_sync() to both drain and prevent future
invocation of process_fw_events_work().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251027140217.121274-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
group_free_queue() can be called on a partially initialized queue
object if something fails in group_create_queue(). Make sure we don't
call drm_sched_entity_destroy() on an entity that hasn't been
initialized.
Fixes: 7d9c3442b0 ("drm/panthor: Defer scheduler entitiy destruction to queue release")
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
In practice it's not going to fail because we're passing the current
sanity checks done by drm_sched_entity_init(), and that's the only
reason it would return an error, but better safe than sorry.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-1-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
