Some fuse servers need to prune their caches, which can only be done if the
kernel's own dentry/inode caches are pruned first to avoid dangling
references.
Add FUSE_NOTIFY_PRUNE, which takes an array of node ID's to try and get rid
of. Inodes with active references are skipped.
A similar functionality is already provided by FUSE_NOTIFY_INVAL_ENTRY with
the FUSE_EXPIRE_ONLY flag. Differences in the interface are
FUSE_NOTIFY_INVAL_ENTRY:
- can only prune one dentry
- dentry is determined by parent ID and name
- if inode has multiple aliases (cached hard links), then they would have
to be invalidated individually to be able to get rid of the inode
FUSE_NOTIFY_PRUNE:
- can prune multiple inodes
- inodes determined by their node ID
- aliases are taken care of automatically
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Remove tail calls of fuse_copy_finish(), since it's now done from
fuse_dev_do_write().
No functional change.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In case of FUSE_NOTIFY_RESEND and FUSE_NOTIFY_INC_EPOCH fuse_copy_finish()
isn't called.
Fix by always calling fuse_copy_finish() after fuse_notify(). It's a no-op
if called a second time.
Fixes: 760eac73f9 ("fuse: Introduce a new notification type for resend pending requests")
Fixes: 2396356a94 ("fuse: add more control over cache invalidation behaviour")
Cc: <stable@vger.kernel.org> # v6.9
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Constants that change value from version to version have no place in an
interface definition.
Hopefully this won't break anything.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Remove extra logic in fuse_readpages_end() that checks against null
folio mappings. This was added in commit ce534fb052 ("fuse: allow
splice to move pages"):
"Since the remove_from_page_cache() + add_to_page_cache_locked()
are non-atomic it is possible that the page cache is repopulated in
between the two and add_to_page_cache_locked() will fail. This
could be fixed by creating a new atomic replace_page_cache_page()
function.
fuse_readpages_end() needed to be reworked so it works even if
page->mapping is NULL for some or all pages which can happen if the
add_to_page_cache_locked() failed."
Commit ef6a3c6311 ("mm: add replace_page_cache_page() function") added
atomic page cache replacement, which means the check against null
mappings can be removed.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 6be0ddb202 ("Documentation: fuse: Consolidate FUSE docs into its
own subdirectory") moved fuse docs to a subdirectory but didn't update
references inside the kernel tree.
Fixes: 6be0ddb202 ("Documentation: fuse: Consolidate FUSE docs into its own subdirectory")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508261621.EaNMWVjm-lkp@intel.com/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FUSE_INIT has always been asynchronous with mount. That means that the
server processed this request after the mount syscall returned.
This means that FUSE_INIT can't supply the root inode's ID, hence it
currently has a hardcoded value. There are other limitations such as not
being able to perform getxattr during mount, which is needed by selinux.
To remove these limitations allow server to process FUSE_INIT while
initializing the in-core super block for the fuse filesystem. This can
only be done if the server is prepared to handle this, so add
FUSE_DEV_IOC_SYNC_INIT ioctl, which
a) lets the server know whether this feature is supported, returning
ENOTTY othewrwise.
b) lets the kernel know to perform a synchronous initialization
The implementation is slightly tricky, since fuse_dev/fuse_conn are set up
only during super block creation. This is solved by setting the private
data of the fuse device file to a special value ((struct fuse_dev *) 1) and
waiting for this to be turned into a proper fuse_dev before commecing with
operations on the device file.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is slightly tricky, since the VFS uses non-zeroing allocation to
preserve some fields that are left in a consistent state.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250818083224.229-1-luochunsheng@ustc.edu/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The 'inode' parameter in fuse_passthrough_open() is never referenced
in the function implementation.
Signed-off-by: Chunsheng Luo <luochunsheng@ustc.edu>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The original commit be2ff42c5d ("fuse: Use hash table to link
processing request") converted fuse_pqueue->processing to a hash table,
but virtio_fs_enqueue_req() was not updated to use it correctly.
So use fuse_pqueue->processing as a hash table, this make the code
more coherent
Co-developed-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There are no users of BDI_CAP_WRITEBACK_ACCT now that fuse doesn't do
its own writeback accounting. This commit removes
BDI_CAP_WRITEBACK_ACCT.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
commit 0c58a97f91 ("fuse: remove tmp folio for writebacks and internal
rb tree") removed temp folios for dirty page writeback. Consequently,
fuse can now use the default writeback accounting.
With switching fuse to use default writeback accounting, there are some
added benefits. This updates wb->writeback_inodes tracking as well now
and updates writeback throughput estimates after writeback completion.
This commit also removes inc_wb_stat() and dec_wb_stat(). These have no
callers anymore now that fuse does not call them.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Since clear_bit is an atomic operation, the spinlock is redundant and
can be removed, reducing lock contention is good for performance.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With the change in aee03ea7ff98 ("fuse: support large folios for
writethrough writes"), this old line for setting ap->descs[0].offset is
now obsolete and unneeded. This should have been removed as part of
aee03ea7ff98.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Fixes: aee03ea7ff98 ("fuse: support large folios for writethrough writes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use freezable wait in fuse_get_req() so that it won't block
the system from entering suspend:
Freezing user space processes failed after 20.009 seconds
Call trace:
__switch_to+0xcc/0x168
schedule+0x57c/0x1138
fuse_get_req+0xd0/0x2b0
fuse_simple_request+0x120/0x620
fuse_getxattr+0xe4/0x158
fuse_xattr_get+0x2c/0x48
__vfs_getxattr+0x160/0x1d8
get_vfs_caps_from_disk+0x74/0x1a8
__audit_inode+0x244/0x4d8
user_path_at_empty+0x2e0/0x390
__arm64_sys_faccessat+0xdc/0x260
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
All four FUSE docs are currently in upper-level
Documentation/filesystems/ directory, but these are distinct as a group
of its own. Move them into Documentation/filesystems/fuse/ subdirectory.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch add a simple functional test for the "abort" file
in fusectlfs (/sys/fs/fuse/connections/ID/abort).
A simple fuse daemon is added for testing.
Related discussion can be found in the link below.
Link: https://lore.kernel.org/all/CAOQ4uxjKFXOKQxPpxtS6G_nR0tpw95w0GiO68UcWg_OBhmSY=Q@mail.gmail.com/
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As I preparing patches adding selftests for fusectl,
I notice that documentation of max_background and congestion_threshold
is missing.
This patch add some descriptions about these two files.
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The FUSE protocol uses struct fuse_write_out to convey the return value of
copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE
interface supports a 64-bit size copies and there's no reason why copies
should be limited to 32-bit.
Introduce a new op COPY_FILE_RANGE_64, which is identical, except the
number of bytes copied is returned in a 64-bit value.
If the fuse server does not support COPY_FILE_RANGE_64, fall back to
COPY_FILE_RANGE.
Reported-by: Florian Weimer <fweimer@redhat.com>
Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On regular fuse filesystems, i_blkbits is set to PAGE_SHIFT which means
any iomap partial writes will mark the entire folio as uptodate. However
fuseblk filesystems work differently and allow the blocksize to be less
than the page size. As such, this may lead to data corruption if fuseblk
sets its blocksize to less than the page size, uses the writeback cache,
and does a partial write, then a read and the read happens before the
write has undergone writeback, since the folio will not be marked
uptodate from the partial write so the read will read in the entire
folio from disk, which will overwrite the partial write.
The long-term solution for this, which will also be needed for fuse to
enable large folios with the writeback cache on, is to have fuse also
use iomap for folio reads, but until that is done, the cleanest
workaround is to use the page size for fuseblk's internal kernel inode
blksize/blkbits values while maintaining current behavior for stat().
This was verified using ntfs-3g:
$ sudo mkfs.ntfs -f -c 512 /dev/vdd1
$ sudo ntfs-3g /dev/vdd1 ~/fuseblk
$ stat ~/fuseblk/hi.txt
IO Block: 512
Fixes: a4c9ab1d49 ("fuse: use iomap for buffered writes")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As pointed out by Miklos[1], in the fuse_update_get_attr() path, the
attributes returned to stat may be cached values instead of fresh ones
fetched from the server. In the case where the server returned a
modified blocksize value, we need to cache it and reflect it back to
stat if values are not re-fetched since we now no longer directly change
inode->i_blkbits.
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguCOxeVX88_zPd1hqziB_C+tmfuDhZP5qO2nKmnb-dTUA@mail.gmail.com/ [1]
Fixes: 542ede096e ("fuse: keep inode->i_blkbits constant")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The FUSE protocol uses struct fuse_write_out to convey the return value of
copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE
interface supports a 64-bit size copies.
Currently the number of bytes copied is silently truncated to 32-bit, which
may result in poor performance or even failure to copy in case of
truncation to zero.
Reported-by: Florian Weimer <fweimer@redhat.com>
Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/
Fixes: 88bc7d5097 ("fuse: add support for copy_file_range()")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Just like write(), copy_file_range() should check if the return value is
less or equal to the requested number of bytes.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250807062425.694-1-luochunsheng@ustc.edu/
Fixes: 88bc7d5097 ("fuse: add support for copy_file_range()")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We do not support passthrough operations other than read/write on
regular file, so allowing non-regular backing files makes no sense.
Fixes: efad7153bf ("fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN")
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
vectors conversion
- Filter out the invalid machine reset reason value -1 when running as a guest
as in such cases the reason why the machine was rebooted does not make
a whole lot of sense
- Init the resource control machinery on Hygon hw, also in order to avoid
a division by 0 in addition to actually enabling the feature on hw which
supports it
-----BEGIN PGP SIGNATURE-----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=VH8m
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the GDS mitigation detection on some machines after the recent
attack vectors conversion
- Filter out the invalid machine reset reason value -1 when running as
a guest as in such cases the reason why the machine was rebooted does
not make a whole lot of sense
- Init the resource control machinery on Hygon hw in order to avoid a
division by zero and to actually enable the feature on hw which
supports it
* tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix GDS mitigation selecting when mitigation is off
x86/CPU/AMD: Ignore invalid reset reason value
x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper
This includes a fix part of the KSPP (Kernel Self Protection Project) to replace
the deprecated and unsafe strcpy() calls in the kernel parameter string handler
and sysfs parameters for built-in modules. Single commit, no functional changes.
-----BEGIN PGP SIGNATURE-----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=8/92
-----END PGP SIGNATURE-----
Merge tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fix from Daniel Gomez:
"This includes a fix part of the KSPP (Kernel Self Protection Project)
to replace the deprecated and unsafe strcpy() calls in the kernel
parameter string handler and sysfs parameters for built-in modules.
Single commit, no functional changes"
* tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
params: Replace deprecated strcpy() with strscpy() and memcpy()
Here are a small number of char/misc/iio and other driver fixes for
6.17-rc3. Included in here are:
- IIO driver bugfixes for reported issues
- bunch of comedi driver fixes
- most core bugfix
- fpga driver bugfix
- cdx driver bugfix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaKnPRw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymvOACffARDm9ydwRppM7KpQ0CDEOP8Gd8An2zt1S3z
W5KoFRCkMEOZj93miep3
=Lp/R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio fixes from Greg KH:
"Here are a small number of char/misc/iio and other driver fixes for
6.17-rc3. Included in here are:
- IIO driver bugfixes for reported issues
- bunch of comedi driver fixes
- most core bugfix
- fpga driver bugfix
- cdx driver bugfix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: core: Drop device reference after usage in get_channel()
comedi: Make insn_rw_emulate_bits() do insn->n samples
comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl()
comedi: pcl726: Prevent invalid irq number
cdx: Fix off-by-one error in cdx_rpmsg_probe()
fpga: zynq_fpga: Fix the wrong usage of dma_map_sgtable()
iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()
iio: light: as73211: Ensure buffer holes are zeroed
iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
iio: adc: rzg2l: Cleanup suspend/resume path
iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4
iio: adc: bd79124: Add GPIOLIB dependency
iio: imu: inv_icm42600: change invalid data error to -EBUSY
iio: adc: ad7124: fix channel lookup in syscalib functions
iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read()
iio: adc: ad7173: prevent scan if too many setups requested
iio: proximity: isl29501: fix buffered read on big-endian systems
iio: accel: sca3300: fix uninitialized iio scan data
Here are some small USB driver fixes for 6.17-rc3 to resolve a bunch of
reported issues. Included in here are:
- typec driver fixes
- dwc3 new device id
- dwc3 driver fixes
- new usb-storage driver quirks
- xhci driver fixes
- other tiny USB driver fixes to resolve bugs
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaKnTpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk+7gCfV8UA7wAViZTaXWmqsa3GzeuSMKIAoKdcM0+j
hV48oay+3njPXzlsTp0d
=lRRr
-----END PGP SIGNATURE-----
Merge tag 'usb-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.17-rc3 to resolve a bunch
of reported issues. Included in here are:
- typec driver fixes
- dwc3 new device id
- dwc3 driver fixes
- new usb-storage driver quirks
- xhci driver fixes
- other tiny USB driver fixes to resolve bugs
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: fix host not responding after suspend and resume
usb: xhci: Fix slot_id resource race conflict
usb: typec: fusb302: Revert incorrect threaded irq fix
USB: core: Update kerneldoc for usb_hcd_giveback_urb()
usb: typec: maxim_contaminant: re-enable cc toggle if cc is open and port is clean
usb: typec: maxim_contaminant: disable low power mode when reading comparator values
usb: dwc3: Remove WARN_ON for device endpoint command timeouts
USB: storage: Ignore driver CD mode for Realtek multi-mode Wi-Fi dongles
usb: storage: realtek_cr: Use correct byte order for bcs->Residue
usb: chipidea: imx: improve usbmisc_imx7d_pullup()
kcov, usb: Don't disable interrupts in kcov_remote_start_usb_softirq()
usb: dwc3: pci: add support for the Intel Wildcat Lake
usb: dwc3: Ignore late xferNotReady event to prevent halt timeout
USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera
usb: core: hcd: fix accessing unmapped memory in SINGLE_STEP_SET_FEATURE test
usb: renesas-xhci: Fix External ROM access timeouts
usb: gadget: tegra-xudc: fix PM use count underflow
usb: quirks: Add DELAY_INIT quick for another SanDisk 3.2Gen1 Flash Drive
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding '.pc'
files are not installed, it reports that the libraries are missing and
confuses the developer. Instead, report that the pkg-config files are
missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space strings.
If the parser fails due to incorrect processing, it doesn't terminate the
buffer with a nul byte. Add a "failed" flag to the parser that gets set when
parsing fails and is used to know if the buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an error
path that can exit the function without unregistering it. Since the function
returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for read,
an iterator is created and sets its hash pointer to the associated hash that
represents filtering or notrace filtering to it. The issue is that the hash
it points to can change while the iteration is happening. All the locking
used to access the tracer's hashes are released which means those hashes can
change or even be freed. Using the hash pointed to by the iterator can cause
UAF bugs or similar.
Have the read of these files allocate and copy the corresponding hashes and
use that as that will keep them the same while the iterator is open. This
also simplifies the code as opening it for write already does an allocate
and copy, and now that the read is doing the same, there's no need to check
which way it was opened on the release of the file, and the iterator hash
can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the exit of
a function. When the exit is right after the entry, it combines the two
events into one with the output of "function();", instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events includes
storage that saves the entry event while it peaks at the next event in
the ring buffer. The peek can free the entry event so the iterator must
store the information to use it after the peek.
With the addition of function graph tracer recording the args, where the
args are a dynamic array in the entry event, the temp storage does not save
them. This causes the args to be corrupted or even cause a read of unsafe
memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer will be
printed to the console. But it can also be triggered by sysrq-z. If a
sysrq-z is triggered while a task is reading trace_pipe it can cause a race
in the ftrace_dump() where it checks if the buffer has content, then it
checks if the next event is available, and then prints the output
(regardless if the next event was available or not). Reading trace_pipe
at the same time can cause it to not be available, and this triggers a
WARN_ON in the print. Move the printing into the check if the next event
exists or not.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaKnAGRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qotPAQD02idezasiFi0vakLTR+0x/uAI2UOL
5RLfTwmZW7S1FwEAwOvGpKx3k/kUwDp5EReP34A+1Fqyc5Mvps4UCE1s4gM=
=ENHu
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
- Fix swapped handling of lru_gen and lru_gen_full debugfs files in
vmscan.
- Fix debugfs mount options (uid, gid, mode) being silently ignored.
- Fix leak of devres action in the unwind path of Devres::new().
- Documentation
- Expand and fix documentation of (outdated) Device, DeviceContext
and generic driver infrastructure.
- Fix C header link of faux device abstractions.
- Clarify expected interaction with the security team.
- Smooth text flow in the security bug reporting process
documentation.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaKmYLgAKCRBFlHeO1qrK
LuUiAQDMA7wZCdzvU8kZazpVpiN5t4Y/EeCztbZJlTG1b0F66QEAgKfgBbdKdgvu
LNSXY0Mo6/t6RbFbW5+wR4R+sGn6PwQ=
=wBy0
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix swapped handling of lru_gen and lru_gen_full debugfs files in
vmscan
- Fix debugfs mount options (uid, gid, mode) being silently ignored
- Fix leak of devres action in the unwind path of Devres::new()
- Documentation:
- Expand and fix documentation of (outdated) Device, DeviceContext
and generic driver infrastructure
- Fix C header link of faux device abstractions
- Clarify expected interaction with the security team
- Smooth text flow in the security bug reporting process
documentation
* tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Documentation: smooth the text flow in the security bug reporting process
Documentation: clarify the expected collaboration with security bugs reporters
debugfs: fix mount options not being applied
rust: devres: fix leaking call to devm_add_action()
rust: faux: fix C header link
driver: rust: expand documentation for driver infrastructure
device: rust: expand documentation for Device
device: rust: expand documentation for DeviceContext
mm/vmscan: fix inverted polarity in lru_gen_seq_show()
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home
Fixes: c20489dad1 ("ftrace: Assign iter->hash to filter or notrace hashes on seq read")
Closes: https://lore.kernel.org/all/20250813023044.2121943-1-wutengda@huaweicloud.com/
Closes: https://lore.kernel.org/all/20250822192437.GA458494@ax162/
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes: d769041f86 ("ring_buffer: implement new locking")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The output of the function graph tracer has two ways to display its
entries. One way for leaf functions with no events recorded within them,
and the other is for functions with events recorded inside it. As function
graph has an entry and exit event, to simplify the output of leaf
functions it combines the two, where as non leaf functions are separate:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) 0.391 us | __raise_softirq_irqoff();
2) 1.191 us | }
2) 2.086 us | }
The __raise_softirq_irqoff() function above is really two events that were
merged into one. Otherwise it would have looked like:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) | __raise_softirq_irqoff() {
2) 0.391 us | }
2) 1.191 us | }
2) 2.086 us | }
In order to do this merge, the reading of the trace output file needs to
look at the next event before printing. But since the pointer to the event
is on the ring buffer, it needs to save the entry event before it looks at
the next event as the next event goes out of focus as soon as a new event
is read from the ring buffer. After it reads the next event, it will print
the entry event with either the '{' (non leaf) or ';' and timestamps (leaf).
The iterator used to read the trace file has storage for this event. The
problem happens when the function graph tracer has arguments attached to
the entry event as the entry now has a variable length "args" field. This
field only gets set when funcargs option is used. But the args are not
recorded in this temp data and garbage could be printed. The entry field
is copied via:
data->ent = *curr;
Where "curr" is the entry field. But this method only saves the non
variable length fields from the structure.
Add a helper structure to the iterator data that adds the max args size to
the data storage in the iterator. Then simply copy the entire entry into
this storage (with size protection).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250820195522.51d4a268@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Tested-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/aJaxRVKverIjF4a6@lappy/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Fix mismatched kvalloc()/kfree()
- Spelling fixes in documentation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaKh6VwAKCRCFwuHvBreF
YQkaAPwNEgZnQlmb8zPrTSm9cNTiCZlEr+s1KbE4brXza68PdwEAgAFm3KiBgG2n
2WhVfGQUcCpPnjcJ7skq4F765Y3GvAE=
=J6IV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two very minor fixes:
- Fix mismatched kvalloc()/kfree()
- Spelling fixes in documentation"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix spelling errors in iommufd.rst
iommufd: viommu: free memory allocated by kvcalloc() using kvfree()
Bindig requires a node name matching ‘^ethernet@[0-9a-f]+$’. This patch
changes the clock name from “etop” to “ethernet”.
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: dac0bad937 ("dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: 14d4e308e0 ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
- When kernel lockdown is active userspace tools that rely on read
operations only are unnecessarily blocked. Fix that by avoiding
ioctl registration during lockdown
- Invalid NULL pointer accesses succeed due to the lowcore is always
mapped the identity mapping pinned to zero. To fix that never map
the first two pages of physical memory with identity mapping
- Fix invalid SCCB present check in the SCLP interrupt handler
- Update defconfigs
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaKhfnRccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8KsfAP4m5In0Dv8QMvfxKZuImMcUXN0m
FABuwlSVVoV2dKb0/AD/XX5XVvkg6EWEbAfknaQ06U6WdWQX/3BtS3hfDuLk1gQ=
=4N65
-----END PGP SIGNATURE-----
Merge tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- When kernel lockdown is active userspace tools that rely on read
operations only are unnecessarily blocked. Fix that by avoiding ioctl
registration during lockdown
- Invalid NULL pointer accesses succeed due to the lowcore is always
mapped the identity mapping pinned to zero. To fix that never map the
first two pages of physical memory with identity mapping
- Fix invalid SCCB present check in the SCLP interrupt handler
- Update defconfigs
* tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/hypfs: Enable limited access during lockdown
s390/hypfs: Avoid unnecessary ioctl registration in debugfs
s390/mm: Do not map lowcore with identity mapping
s390/sclp: Fix SCCB present check
s390/configs: Set HZ=1000
s390/configs: Update defconfigs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCaKf/jgAKCRCAXGG7T9hj
vsTcAP0eRBCWDlCTzyuRN+2MpyryoNspFcovhJGwMG16a/7SbgEA/Vi7WqK7Y0XT
/7ovC2AzehL9iJaZvl8hWULVnw9C8Aw=
=gDSN
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two small cleanups which are both relevant only when running as a Xen
guest"
* tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen/xenbus: remove quirk for Xen 3.x
compiler: remove __ADDRESSABLE_ASM{_STR,}() again
Fixes and New HW Support:
- amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Register driver even if hwmon registration fails
- amd/pmc: Drop SMU F/W match for Cezanne
- dell-smbios-wmi: Separate "priority" from WMI device ID
- hp-wmi: mark Victus 16-r1xxx for Victus s fan and thermal profile support
- intel-uncore-freq: Check write blocked for efficiency latency control
The following is an automated shortlog grouped by driver:
amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Ensure success even if hwmon registration fails
amd: pmc:
- Drop SMU F/W match for Cezanne
dell-smbios-wmi:
- Stop touching WMI device ID
hp-wmi:
- mark Victus 16-r1xxx for victus_s fan and thermal profile support
intel-uncore-freq:
- Check write blocked for ELC
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaKhs0wAKCRBZrE9hU+XO
MQOXAP4zJofX7KXdbIqCpAdlL+zbdDKichzyZG36u+BKdOn8VQEArbQaZoHEq/05
ReoDwmIWS7KWgcbXkZxlwkWYbrOLpwM=
=ZB4H
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Register driver even if hwmon registration fails
- amd/pmc: Drop SMU F/W match for Cezanne
- dell-smbios-wmi: Separate "priority" from WMI device ID
- hp-wmi: mark Victus 16-r1xxx for Victus s fan and thermal profile
support
- intel-uncore-freq: Check write blocked for efficiency latency control
* tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: mark Victus 16-r1xxx for victus_s fan and thermal profile support
platform/x86/amd/hsmp: Ensure success even if hwmon registration fails
platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL
platform/x86/intel-uncore-freq: Check write blocked for ELC
platform/x86/amd: pmc: Drop SMU F/W match for Cezanne
platform/x86: dell-smbios-wmi: Stop touching WMI device ID
-----BEGIN PGP SIGNATURE-----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=mbqK
-----END PGP SIGNATURE-----
Merge tag 'block-6.17-20250822' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A set of fixes for block that should go into this tree. A bit larger
than what I usually have at this point in time, a lot of that is the
continued fixing of the lockdep annotation for queue freezing that we
recently added, which has highlighted a number of little issues here
and there. This contains:
- MD pull request via Yu:
- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode,
the old release with a new kernel now will have warning about
deprecated behavior, and we prepare to remove this legacy mode
after about a year later
- The rename in kernel causing user tools build failure, revert
the rename in mdp_superblock_s
- Fix a regression that interrupted resync can be shown as
recover from mdstat or sysfs
- Improve file size detection for loop, particularly for networked
file systems, by using getattr to get the size rather than the
cached inode size.
- Hotplug CPU lock vs queue freeze fix
- Lockdep fix while updating the number of hardware queues
- Fix stacking for PI devices
- Silence bio_check_eod() for the known case of device removal where
the size is truncated to 0 sectors"
* tag 'block-6.17-20250822' of git://git.kernel.dk/linux:
block: avoid cpu_hotplug_lock depedency on freeze_lock
block: decrement block_rq_qos static key in rq_qos_del()
block: skip q->rq_qos check in rq_qos_done_bio()
blk-mq: fix lockdep warning in __blk_mq_update_nr_hw_queues
block: tone down bio_check_eod
loop: use vfs_getattr_nosec for accurate file size
loop: Consolidate size calculation logic into lo_calculate_size()
block: remove newlines from the warnings in blk_validate_integrity_limits
block: handle pi_tuple_size in queue_limits_stack_integrity
selftests: ublk: Use ARRAY_SIZE() macro to improve code
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
