If an error occurs after a successful airoha_hw_init() call,
airoha_ppe_deinit() needs to be called as already done in the remove
function.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/1c940851b4fa3c3ed2a142910c821493a136f121.1746715755.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support returning VMADDR_CID_LOCAL in case no other vsock transport is
available.
Fixes: 0e12190578 ("vsock: add local transport support in the vsock core")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250703-vsock-transports-toctou-v4-3-98f0eb530747@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Transport assignment may race with module unload. Protect new_transport
from becoming a stale pointer.
This also takes care of an insecure call in vsock_use_local_transport();
add a lockdep assert.
BUG: unable to handle page fault for address: fffffbfff8056000
Oops: Oops: 0000 [#1] SMP KASAN
RIP: 0010:vsock_assign_transport+0x366/0x600
Call Trace:
vsock_connect+0x59c/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250703-vsock-transports-toctou-v4-2-98f0eb530747@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vsock_find_cid() and vsock_dev_do_ioctl() may race with module unload.
transport_{g2h,h2g} may become NULL after the NULL check.
Introduce vsock_transport_local_cid() to protect from a potential
null-ptr-deref.
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
RIP: 0010:vsock_find_cid+0x47/0x90
Call Trace:
__vsock_bind+0x4b2/0x720
vsock_bind+0x90/0xe0
__sys_bind+0x14d/0x1e0
__x64_sys_bind+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
RIP: 0010:vsock_dev_do_ioctl.isra.0+0x58/0xf0
Call Trace:
__x64_sys_ioctl+0x12d/0x190
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250703-vsock-transports-toctou-v4-1-98f0eb530747@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add check for the return value of rcar_gen4_ptp_alloc()
to prevent potential null pointer dereference.
Fixes: b0d3969d2b ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20250703100109.2541018-1-haoxiang_li2024@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chen-Yu Tsai says:
====================
allwinner: a523: Rename emac0 to gmac0
This small series aims to align the name of the first ethernet
controller found on the Allwinner A523 SoC family with the name
found in the datasheets. It renames the compatible string and
any other references from "emac0" to "gmac0".
When support of the hardware was introduced, the name chosen was
"EMAC", which followed previous generations. However the datasheets
use the name "GMAC" instead, likely because there is another "GMAC"
based on a newer DWMAC IP.
====================
Link: https://patch.msgid.link/20250628054438.2864220-1-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Rename the compatible string to align with the datasheets. A fix for
the device trees will be sent separately.
Fixes: 0454b9057e ("dt-bindings: net: sun8i-emac: Add A523 EMAC0 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250628054438.2864220-2-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow.
When we send data, if an skb exists at the tail of the write queue, the
kernel will attempt to append the new data to that skb. However, the code
that checks for available space in the skb is flawed:
'''
copy = size_goal - skb->len
'''
The types of the variables involved are:
'''
copy: ssize_t (s64 on 64-bit systems)
size_goal: int
skb->len: unsigned int
'''
Due to C's type promotion rules, the signed size_goal is converted to an
unsigned int to match skb->len before the subtraction. The result is an
unsigned int.
When this unsigned int result is then assigned to the s64 copy variable,
it is zero-extended, preserving its non-negative value. Consequently, copy
is always >= 0.
Assume we are sending 2GB of data and size_goal has been adjusted to a
value smaller than skb->len. The subtraction will result in copy holding a
very large positive integer. In the subsequent logic, this large value is
used to update sk->sk_forward_alloc, which can easily cause it to overflow.
The syzkaller reproducer uses TCP_REPAIR to reliably create this
condition. However, this can also occur in real-world scenarios. The
tcp_bound_to_half_wnd() function can also reduce size_goal to a small
value. This would cause the subsequent tcp_wmem_schedule() to set
sk->sk_forward_alloc to a value close to INT_MAX. Further memory
allocation requests would then cause sk_forward_alloc to wrap around and
become negative.
[1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47
Reported-by: syzbot+de6565462ab540f50e47@syzkaller.appspotmail.com
Fixes: 270a1c3de4 ("tcp: Support MSG_SPLICE_PAGES")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20250707054112.101081-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- hci_sync: Fix not disabling advertising instance
- hci_core: Remove check of BDADDR_ANY in hci_conn_hash_lookup_big_state
- hci_sync: Fix attempting to send HCI_Disconnect to BIS handle
- hci_event: Fix not marking Broadcast Sink BIS as connected
-----BEGIN PGP SIGNATURE-----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=o7T9
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-07-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix not disabling advertising instance
- hci_core: Remove check of BDADDR_ANY in hci_conn_hash_lookup_big_state
- hci_sync: Fix attempting to send HCI_Disconnect to BIS handle
- hci_event: Fix not marking Broadcast Sink BIS as connected
* tag 'for-net-2025-07-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix not marking Broadcast Sink BIS as connected
Bluetooth: hci_sync: Fix attempting to send HCI_Disconnect to BIS handle
Bluetooth: hci_core: Remove check of BDADDR_ANY in hci_conn_hash_lookup_big_state
Bluetooth: hci_sync: Fix not disabling advertising instance
====================
Link: https://patch.msgid.link/20250703160409.1791514-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a null-ptr-deref in tipc_conn_close() during netns
dismantle. [0]
tipc_topsrv_stop() iterates tipc_net(net)->topsrv->conn_idr and calls
tipc_conn_close() for each tipc_conn.
The problem is that tipc_conn_close() is called after releasing the
IDR lock.
At the same time, there might be tipc_conn_recv_work() running and it
could call tipc_conn_close() for the same tipc_conn and release its
last ->kref.
Once we release the IDR lock in tipc_topsrv_stop(), there is no
guarantee that the tipc_conn is alive.
Let's hold the ref before releasing the lock and put the ref after
tipc_conn_close() in tipc_topsrv_stop().
[0]:
BUG: KASAN: use-after-free in tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165
Read of size 8 at addr ffff888099305a08 by task kworker/u4:3/435
CPU: 0 PID: 435 Comm: kworker/u4:3 Not tainted 4.19.204-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1fc/0x2ef lib/dump_stack.c:118
print_address_description.cold+0x54/0x219 mm/kasan/report.c:256
kasan_report_error.cold+0x8a/0x1b9 mm/kasan/report.c:354
kasan_report mm/kasan/report.c:412 [inline]
__asan_report_load8_noabort+0x88/0x90 mm/kasan/report.c:433
tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165
tipc_topsrv_stop net/tipc/topsrv.c:701 [inline]
tipc_topsrv_exit_net+0x27b/0x5c0 net/tipc/topsrv.c:722
ops_exit_list+0xa5/0x150 net/core/net_namespace.c:153
cleanup_net+0x3b4/0x8b0 net/core/net_namespace.c:553
process_one_work+0x864/0x1570 kernel/workqueue.c:2153
worker_thread+0x64c/0x1130 kernel/workqueue.c:2296
kthread+0x33f/0x460 kernel/kthread.c:259
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Allocated by task 23:
kmem_cache_alloc_trace+0x12f/0x380 mm/slab.c:3625
kmalloc include/linux/slab.h:515 [inline]
kzalloc include/linux/slab.h:709 [inline]
tipc_conn_alloc+0x43/0x4f0 net/tipc/topsrv.c:192
tipc_topsrv_accept+0x1b5/0x280 net/tipc/topsrv.c:470
process_one_work+0x864/0x1570 kernel/workqueue.c:2153
worker_thread+0x64c/0x1130 kernel/workqueue.c:2296
kthread+0x33f/0x460 kernel/kthread.c:259
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Freed by task 23:
__cache_free mm/slab.c:3503 [inline]
kfree+0xcc/0x210 mm/slab.c:3822
tipc_conn_kref_release net/tipc/topsrv.c:150 [inline]
kref_put include/linux/kref.h:70 [inline]
conn_put+0x2cd/0x3a0 net/tipc/topsrv.c:155
process_one_work+0x864/0x1570 kernel/workqueue.c:2153
worker_thread+0x64c/0x1130 kernel/workqueue.c:2296
kthread+0x33f/0x460 kernel/kthread.c:259
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
The buggy address belongs to the object at ffff888099305a00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 8 bytes inside of
512-byte region [ffff888099305a00, ffff888099305c00)
The buggy address belongs to the page:
page:ffffea000264c140 count:1 mapcount:0 mapping:ffff88813bff0940 index:0x0
flags: 0xfff00000000100(slab)
raw: 00fff00000000100 ffffea00028b6b88 ffffea0002cd2b08 ffff88813bff0940
raw: 0000000000000000 ffff888099305000 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888099305900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888099305980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888099305a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888099305a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888099305b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: c5fa7b3cf3 ("tipc: introduce new TIPC server infrastructure")
Reported-by: syzbot+d333febcf8f4bc5f6110@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=27169a847a70550d17be
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250702014350.692213-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From commit 634f1a7110 ("vsock: support sockmap"), `struct proto
vsock_proto`, defined in af_vsock.c, is not static anymore, since it's
used by vsock_bpf.c.
If CONFIG_BPF_SYSCALL is not defined, `make C=2` will print a warning:
$ make O=build C=2 W=1 net/vmw_vsock/
...
CC [M] net/vmw_vsock/af_vsock.o
CHECK ../net/vmw_vsock/af_vsock.c
../net/vmw_vsock/af_vsock.c:123:14: warning: symbol 'vsock_proto' was not declared. Should it be static?
Declare `vsock_proto` regardless of CONFIG_BPF_SYSCALL, since it's defined
in af_vsock.c, which is built regardless of CONFIG_BPF_SYSCALL.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20250703112329.28365-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink has this pattern in some places
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
atomic_add(skb->truesize, &sk->sk_rmem_alloc);
, which has the same problem fixed by commit 5a465a0da1 ("udp:
Fix multiple wraparounds of sk->sk_rmem_alloc.").
For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition
is always false as the two operands are of int.
Then, a single socket can eat as many skb as possible until OOM
happens, and we can see multiple wraparounds of sk->sk_rmem_alloc.
Let's fix it by using atomic_add_return() and comparing the two
variables as unsigned int.
Before:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
-1668710080 0 rtnl:nl_wraparound/293 *
After:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
2147483072 0 rtnl:nl_wraparound/290 *
^
`--- INT_MAX - 576
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Jason Baron <jbaron@akamai.com>
Closes: https://lore.kernel.org/netdev/cover.1750285100.git.jbaron@akamai.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250704054824.1580222-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luo Jie says:
====================
Fix QCA808X WoL Issue
Restore WoL (Wake-on-LAN) enablement via MMD3 register 0x8012 BIT5 for
the QCA808X PHY. This change resolves the issue where WoL functionality
was not working due to its unintended removal in a previous commit.
Refactor at8031_set_wol() into a shared library to enable reuse of the
Wake-on-LAN (WoL) functionality by the AT8031, QCA807X and QCA808X PHY
drivers.
====================
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-0-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous commit unintentionally removed the code responsible for
enabling WoL via MMD3 register 0x8012 BIT5. As a result, Wake-on-LAN
(WoL) support for the QCA808X PHY is no longer functional.
The WoL (Wake-on-LAN) feature for the QCA808X PHY is enabled via MMD3
register 0x8012, BIT5. This implementation is aligned with the approach
used in at8031_set_wol().
Fixes: e58f30246c ("net: phy: at803x: fix the wol setting functions")
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-2-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the WoL (Wake-on-LAN) functionality to a shared library to enable
its reuse by the QCA808X PHY driver, incorporating support for WoL
functionality similar to the implementation in at8031_set_wol().
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-1-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I received a kernel-test-bot report[1] that shows the
[-Wunused-but-set-variable] warning. Since the previous commit I made, as
the 'Fixes' tag shows, gives users an option to turn on and off the
CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with
GCC specifically.
Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer
bugs.
[1]
All warnings (new ones prefixed by >>):
drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq':
>> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable]
10703 | int i, j, rc = 0;
| ^
Fixes: 9b6a30febd ("net: allow rps/rfs related configs to be switched")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - new code bugs:
- eth: txgbe: fix the issue of TX failure
- eth: ngbe: specify IRQ vector when the number of VFs is 7
Previous releases - regressions:
- sched: always pass notifications when child class becomes empty
- ipv4: fix stat increase when udp early demux drops the packet
- bluetooth: prevent unintended pause by checking if advertising is active
- virtio: fix error reporting in virtqueue_resize
- eth: virtio-net:
- ensure the received length does not exceed allocated size
- fix the xsk frame's length check
- eth: lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Previous releases - always broken:
- bluetooth: mesh: check instances prior disabling advertising
- eth: idpf: convert control queue mutex to a spinlock
- eth: dpaa2: fix xdp_rxq_info leak
- eth: amd-xgbe: align CL37 AN sequence as per databook
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O7OS
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - new code bugs:
- eth:
- txgbe: fix the issue of TX failure
- ngbe: specify IRQ vector when the number of VFs is 7
Previous releases - regressions:
- sched: always pass notifications when child class becomes empty
- ipv4: fix stat increase when udp early demux drops the packet
- bluetooth: prevent unintended pause by checking if advertising is active
- virtio: fix error reporting in virtqueue_resize
- eth:
- virtio-net:
- ensure the received length does not exceed allocated size
- fix the xsk frame's length check
- lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Previous releases - always broken:
- bluetooth: mesh: check instances prior disabling advertising
- eth:
- idpf: convert control queue mutex to a spinlock
- dpaa2: fix xdp_rxq_info leak
- amd-xgbe: align CL37 AN sequence as per databook"
* tag 'net-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
vsock/vmci: Clear the vmci transport packet properly when initializing it
dt-bindings: net: sophgo,sg2044-dwmac: Drop status from the example
net: ngbe: specify IRQ vector when the number of VFs is 7
net: wangxun: revert the adjustment of the IRQ vector sequence
net: txgbe: request MISC IRQ in ndo_open
virtio_net: Enforce minimum TX ring size for reliability
virtio_net: Cleanup '2+MAX_SKB_FRAGS'
virtio_ring: Fix error reporting in virtqueue_resize
virtio-net: xsk: rx: fix the frame's length check
virtio-net: use the check_mergeable_len helper
virtio-net: remove redundant truesize check with PAGE_SIZE
virtio-net: ensure the received length does not exceed allocated size
net: ipv4: fix stat increase when udp early demux drops the packet
net: libwx: fix the incorrect display of the queue number
amd-xgbe: do not double read link status
net/sched: Always pass notifications when child class becomes empty
nui: Fix dma_mapping_error() check
rose: fix dangling neighbour pointers in rose_rt_device_down()
enic: fix incorrect MTU comparison in enic_change_mtu()
amd-xgbe: align CL37 AN sequence as per databook
...
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaGKExAAKCRBcsMJ8RxYu
Y4fTAXoCMZGmJKwTbcBk/9u2nD1ehULBDBQB+jDEjxQUile2fMvSMndxqAw0Dgt5
RAg055kBfiwXnK92j2dgayVabNDY3HAxcmGe4B3OBC58/7rNINtgdujfj/gtHZLG
M0Cko5OICA==
=QrM0
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.16-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- Fix umount hang with unflushable inodes (and add new tracepoint used
for debugging this)
- Fix ABBA deadlock in xfs_reclaim_inode() vs xfs_ifree_cluster()
- Fix dquot buffer pin deadlock
* tag 'xfs-fixes-6.16-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: add FALLOC_FL_ALLOCATE_RANGE to supported flags mask
xfs: fix unmount hang with unflushable inodes stuck in the AIL
xfs: factor out stale buffer item completion
xfs: rearrange code in xfs_buf_item.c
xfs: add tracepoints for stale pinned inode state debug
xfs: avoid dquot buffer pin deadlock
xfs: catch stale AGF/AGF metadata
xfs: xfs_ifree_cluster vs xfs_iflush_shutdown_abort deadlock
xfs: actually use the xfs_growfs_check_rtgeom tracepoint
xfs: Improve error handling in xfs_mru_cache_create()
xfs: move xfs_submit_zoned_bio a bit
xfs: use xfs_readonly_buftarg in xfs_remount_rw
xfs: remove NULL pointer checks in xfs_mru_cache_insert
xfs: check for shutdown before going to sleep in xfs_select_zone
Upon receiving HCI_EVT_LE_BIG_SYNC_ESTABLISHED with status 0x00
(success) the corresponding BIS hci_conn state shall be set to
BT_CONNECTED otherwise they will be left with BT_OPEN which is invalid
at that point, also create the debugfs and sysfs entries following the
same logic as the likes of Broadcast Source BIS and CIS connections.
Fixes: f777d88278 ("Bluetooth: ISO: Notify user space about failed bis connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BIS/PA connections do have their own cleanup proceedure which are
performed by hci_conn_cleanup/bis_cleanup.
Fixes: 23205562ff ("Bluetooth: separate CIS_LINK and BIS_LINK link types")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The check for destination to be BDADDR_ANY is no longer necessary with
the introduction of BIS_LINK.
Fixes: 23205562ff ("Bluetooth: separate CIS_LINK and BIS_LINK link types")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
As the code comments on hci_setup_ext_adv_instance_sync suggests the
advertising instance needs to be disabled in order to update its
parameters, but it was wrongly checking that !adv->pending.
Fixes: cba6b75871 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In vmci_transport_packet_init memset the vmci_transport_packet before
populating the fields to avoid any uninitialised data being left in the
structure.
Cc: Bryan Tan <bryan-bt.tan@broadcom.com>
Cc: Vishnu Dasa <vishnu.dasa@broadcom.com>
Cc: Broadcom internal kernel review list
Cc: Stefano Garzarella <sgarzare@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: virtualization@lists.linux.dev
Cc: netdev@vger.kernel.org
Cc: stable <stable@kernel.org>
Signed-off-by: HarshaVardhana S A <harshavardhana.sa@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250701122254.2397440-1-gregkh@linuxfoundation.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Examples should be complete and should not have a 'status' property,
especially a disabled one because this disables the dt_binding_check of
the example against the schema. Dropping 'status' property shows
missing other properties - phy-mode and phy-handle.
Fixes: 114508a89d ("dt-bindings: net: Add support for Sophgo SG2044 dwmac")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20250701063621.23808-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiawen Wu says:
====================
Fix IRQ vectors
The interrupt vector order was adjusted by [1]commit 937d46ecc5 ("net:
wangxun: add ethtool_ops for channel number") in Linux-6.8. Because at
that time, the MISC interrupt acts as the parent interrupt in the GPIO
IRQ chip. When the number of Rx/Tx ring changes, the last MISC
interrupt must be reallocated. Then the GPIO interrupt controller would
be corrupted. So the initial plan was to adjust the sequence of the
interrupt vectors, let MISC interrupt to be the first one and do not
free it.
Later, irq_domain was introduced in [2]commit aefd013624 ("net: txgbe:
use irq_domain for interrupt controller") to avoid this problem.
However, the vector sequence adjustment was not reverted. So there is
still one problem that has been left unresolved.
Due to hardware limitations of NGBE, queue IRQs can only be requested
on vector 0 to 7. When the number of queues is set to the maximum 8,
the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by
MISC interrupt, and althrough the vector 8 is used by queue interrupt,
it is unable to receive packets. This will cause some packets to be
dropped when RSS is enabled and they are assigned to queue 8.
This patch set fix the above problems.
[1] https://git.kernel.org/netdev/net-next/c/937d46ecc5f9
[2] https://git.kernel.org/netdev/net-next/c/aefd013624a1
====================
Link: https://patch.msgid.link/20250701063030.59340-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For NGBE devices, the queue number is limited to be 1 when SRIOV is
enabled. In this case, IRQ vector[0] is used for MISC and vector[1] is
used for queue, based on the previous patches. But for the hardware
design, the IRQ vector[1] must be allocated for use by the VF[6] when
the number of VFs is 7. So the IRQ vector[0] should be shared for PF
MISC and QUEUE interrupts.
+-----------+----------------------+
| Vector | Assigned To |
+-----------+----------------------+
| Vector 0 | PF MISC and QUEUE |
| Vector 1 | VF 6 |
| Vector 2 | VF 5 |
| Vector 3 | VF 4 |
| Vector 4 | VF 3 |
| Vector 5 | VF 2 |
| Vector 6 | VF 1 |
| Vector 7 | VF 0 |
+-----------+----------------------+
Minimize code modifications, only adjust the IRQ vector number for this
case.
Fixes: 877253d2cb ("net: ngbe: add sriov function support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Due to hardware limitations of NGBE, queue IRQs can only be requested
on vector 0 to 7. When the number of queues is set to the maximum 8,
the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by
MISC interrupt, and althrough the vector 8 is used by queue interrupt,
it is unable to receive packets. This will cause some packets to be
dropped when RSS is enabled and they are assigned to queue 8.
So revert the adjustment of the MISC IRQ location, to make it be the
last one in IRQ vectors.
Fixes: 937d46ecc5 ("net: wangxun: add ethtool_ops for channel number")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move the creating of irq_domain for MISC IRQ from .probe to .ndo_open,
and free it in .ndo_stop, to maintain consistency with the queue IRQs.
This it for subsequent adjustments to the IRQ vectors.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250701063030.59340-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Laurent Vivier says:
====================
virtio: Fixes for TX ring sizing and resize error reporting
This patch series contains two fixes and a cleanup for the virtio subsystem.
The first patch fixes an error reporting bug in virtio_ring's
virtqueue_resize() function. Previously, errors from internal resize
helpers could be masked if the subsequent re-enabling of the virtqueue
succeeded. This patch restores the correct error propagation, ensuring that
callers of virtqueue_resize() are properly informed of underlying resize
failures.
The second patch does a cleanup of the use of '2+MAX_SKB_FRAGS'
The third patch addresses a reliability issue in virtio_net where the TX
ring size could be configured too small, potentially leading to
persistently stopped queues and degraded performance. It enforces a
minimum TX ring size to ensure there's always enough space for at least one
maximally-fragmented packet plus an additional slot.
====================
Link: https://patch.msgid.link/20250521092236.661410-1-lvivier@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The `tx_may_stop()` logic stops TX queues if free descriptors
(`sq->vq->num_free`) fall below the threshold of (`MAX_SKB_FRAGS` + 2).
If the total ring size (`ring_num`) is not strictly greater than this
value, queues can become persistently stopped or stop after minimal
use, severely degrading performance.
A single sk_buff transmission typically requires descriptors for:
- The virtio_net_hdr (1 descriptor)
- The sk_buff's linear data (head) (1 descriptor)
- Paged fragments (up to MAX_SKB_FRAGS descriptors)
This patch enforces that the TX ring size ('ring_num') must be strictly
greater than (MAX_SKB_FRAGS + 2). This ensures that the ring is
always large enough to hold at least one maximally-fragmented packet
plus at least one additional slot.
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-4-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Improve consistency by using everywhere it is needed
'MAX_SKB_FRAGS + 2' rather than '2+MAX_SKB_FRAGS' or
'2 + MAX_SKB_FRAGS'.
No functional change.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-3-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The virtqueue_resize() function was not correctly propagating error codes
from its internal resize helper functions, specifically
virtqueue_resize_packet() and virtqueue_resize_split(). If these helpers
returned an error, but the subsequent call to virtqueue_enable_after_reset()
succeeded, the original error from the resize operation would be masked.
Consequently, virtqueue_resize() could incorrectly report success to its
caller despite an underlying resize failure.
This change restores the original code behavior:
if (vdev->config->enable_vq_after_reset(_vq))
return -EBUSY;
return err;
Fix: commit ad48d53b5b ("virtio_ring: separate the logic of reset/enable from virtqueue_resize")
Cc: xuanzhuo@linux.alibaba.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-2-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When calling buf_to_xdp, the len argument is the frame data's length
without virtio header's length (vi->hdr_len). We check that len with
xsk_pool_get_rx_frame_size() + vi->hdr_len
to ensure the provided len does not larger than the allocated chunk
size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk,
we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost
to start placing data from
hard_start + XDP_PACKET_HEADROOM - vi->hdr_len
not
hard_start + XDP_PACKET_HEADROOM
But the first buffer has virtio_header, so the maximum frame's length in
the first buffer can only be
xsk_pool_get_rx_frame_size()
not
xsk_pool_get_rx_frame_size() + vi->hdr_len
like in the current check.
This commit adds an additional argument to buf_to_xdp differentiate
between the first buffer and other ones to correctly calculate the maximum
frame's length.
Cc: stable@vger.kernel.org
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: a4e7ba7027 ("virtio_net: xsk: rx: support recv small mode")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250630151315.86722-2-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bui Quang Minh says:
====================
virtio-net: fixes for mergeable XDP receive path
This series contains fixes for XDP receive path in virtio-net
- Patch 1: add a missing check for the received data length with our
allocated buffer size in mergeable mode.
- Patch 2: remove a redundant truesize check with PAGE_SIZE in mergeable
mode
- Patch 3: make the current repeated code use the check_mergeable_len to
check for received data length in mergeable mode
====================
Link: https://patch.msgid.link/20250630144212.48471-1-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace the current repeated code to check received length in mergeable
mode with the new check_mergeable_len helper.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250630144212.48471-4-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The truesize is guaranteed not to exceed PAGE_SIZE in
get_mergeable_buf_len(). It is saved in mergeable context, which is not
changeable by the host side, so the check in receive path is quite
redundant.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250630144212.48471-3-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In xdp_linearize_page, when reading the following buffers from the ring,
we forget to check the received length with the true allocate size. This
can lead to an out-of-bound read. This commit adds that missing check.
Cc: <stable@vger.kernel.org>
Fixes: 4941d472bf ("virtio-net: do not reset during XDP set")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250630144212.48471-2-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-01 (idpf, igc)
For idpf:
Michal returns 0 for key size when RSS is not supported.
Ahmed changes control queue to a spinlock due to sleeping calls.
For igc:
Vitaly disables L1.2 PCI-E link substate on I226 devices to resolve
performance issues.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: disable L1.2 PCI-E link substate to avoid performance issue
idpf: convert control queue mutex to a spinlock
idpf: return 0 size for RSS key if not supported
====================
Link: https://patch.msgid.link/20250701164317.2983952-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_v4_early_demux now returns drop reasons as it either returns 0 or
ip_mc_validate_source, which returns itself a drop reason. However its
use was not converted in ip_rcv_finish_core and the drop reason is
ignored, leading to potentially skipping increasing LINUX_MIB_IPRPFILTER
if the drop reason is SKB_DROP_REASON_IP_RPFILTER.
This is a fix and we're not converting udp_v4_early_demux to explicitly
return a drop reason to ease backports; this can be done as a follow-up.
Fixes: d46f827016 ("net: ip: make ip_mc_validate_source() return drop reason")
Cc: Menglong Dong <menglong8.dong@gmail.com>
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250701074935.144134-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is
changed to be 1. RSS is disabled at this moment, and the indices of FDIR
have not be changed in wx_set_rss_queues(). So the combined count still
shows the previous value. This issue was introduced when supporting
FDIR. Fix it for those devices that support FDIR.
Fixes: 34744a7749 ("net: txgbe: add FDIR info to ethtool ops")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/A5C8FE56D6C04608+20250701070625.73680-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The link status is latched low so that momentary link drops
can be detected. Always double-reading the status defeats this
design feature. Only double read if link was already down
This prevents unnecessary duplicate readings of the link status.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent.
Fixes: 3f98113810 ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()")
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix PCI error recovery and bring it in line with AER/EEH
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaGU3EBccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8BoVAP4+t6zSnkV8nSDTX6yISaI9o8Dx
v4feTwMOkizuFbQbxQEA/QiQsN4bOymNDWwNgkzLDEBjirVLsYVzlvS2ttFfjAE=
=oStU
-----END PGP SIGNATURE-----
Merge tag 's390-6.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix PCI error recovery and bring it in line with AER/EEH
* tag 's390-6.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Allow automatic recovery with minimal driver support
s390/pci: Do not try re-enabling load/store if device is disabled
s390/pci: Fix stale function handles in error handling
Some changes to the userspace selftest framework cause the iommufd tests
to start failing. This turned out to be bugs in the iommufd side that were
just getting uncovered.
- Deal with MAP_HUGETLB mmaping more than requested even when in MAP_FIXED
mode
- Fixup missing error flow cleanup in the test
- Check that the memory allocations suceeded
- Suppress some bogus gcc 'may be used uninitialized' warnings
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaGU5zgAKCRCFwuHvBreF
YWsUAP9tLIwPDojp5bovlHRn6D9EbeJo96DSaG7ZRKLeBMJzSAEAtob6On8QNTUY
paSxWftGWC0Xyy5BXrAg/HTEM394PAg=
=UXkc
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Some changes to the userspace selftest framework cause the iommufd
tests to start failing. This turned out to be bugs in the iommufd side
that were just getting uncovered.
- Deal with MAP_HUGETLB mmaping more than requested even when in
MAP_FIXED mode
- Fixup missing error flow cleanup in the test
- Check that the memory allocations suceeded
- Suppress some bogus gcc 'may be used uninitialized' warnings"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Fix build warnings due to uninitialized mfd
iommufd/selftest: Add asserts testing global mfd
iommufd/selftest: Add missing close(mfd) in memfd_mmap()
iommufd/selftest: Fix iommufd_dirty_tracking with large hugepage sizes
Several mlx5 bugs, crashers, and reports
- Limit stack usage
- Fix mis-use of __xa_store/erase() without holding the lock to a locked
version
- Rate limit prints in the gid cache error cases
- Fully initialize the event object before making it globally visible in
an xarray
- Fix deadlock inside the ODP code if the MMU notifier was called from a
reclaim context
- Include missed counters for some switchdev configurations and mulit-port MPV
mode
- Fix loopback packet support when in mulit-port MPV mode
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaGVC1AAKCRCFwuHvBreF
YeaCAP4opgkgFIqpAcpYVZbNjeh4XGbH04mLlP+sKU07U+U+6AD/WubEZZdttP4m
vODiddGUIdw3ZvrFDoqWlZ7A/8/SdgI=
=vc41
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several mlx5 bugs, crashers, and reports:
- Limit stack usage
- Fix mis-use of __xa_store/erase() without holding the lock to a
locked version
- Rate limit prints in the gid cache error cases
- Fully initialize the event object before making it globally visible
in an xarray
- Fix deadlock inside the ODP code if the MMU notifier was called
from a reclaim context
- Include missed counters for some switchdev configurations and
mulit-port MPV mode
- Fix loopback packet support when in mulit-port MPV mode"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix vport loopback for MPV device
RDMA/mlx5: Fix CC counters query for MPV
RDMA/mlx5: Fix HW counters query for non-representor devices
IB/core: Annotate umem_mutex acquisition under fs_reclaim for lockdep
IB/mlx5: Fix potential deadlock in MR deregistration
RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert
RDMA/core: Rate limit GID cache warning messages
RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling
RDMA/mlx5: reduce stack usage in mlx5_ib_ufile_hw_cleanup
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values
which is often ~0. The error value should be tested with
dma_mapping_error().
This patch creates a new function in niu_ops to test if the mapping
failed. The test is fixed in niu_rbr_add_page(), added in
niu_start_xmit() and the successfully mapped pages are unmaped upon error.
Fixes: ec2deec1f3 ("niu: Fix to check for dma mapping errors.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
Reported-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e04e2c007ba2c80476cb
Tested-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629030833.6680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
