mirror of
https://github.com/torvalds/linux.git
synced 2026-07-29 18:51:21 +02:00
3bb3396d77
1344125 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
3bb3396d77 |
soc: defconfig updates for 6.15
A small set of updates for the arm64 defconfig to enable more drivers, plus a bit for housekeeping on some of the arm32 defconfigs on particular SoC families. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfjwj0ACgkQYKtH/8kJ UidpFA//UDIav0CXUKd36vBXiXNtManszewCOo0Vuxs0I83bT7T/nL1ILVdVhFQk gqCpCYvCNJpq4GtH9ZutUr4M16wikbuGWVjHuFmjiPc8f3Stlp8szsd6UIf2rvL/ S3JInrcIr93/VruCp2yNN3X+Yjsope4TYyiVD1iEWWv/Dd4FgaVP3K7c3TbJdigE aljXltgRQm1WlAJjEopM6cawWa6nc4en8nMNE2zSlYUjr/huplGGcQIx+mnlmRcm EqNPCTV1vP1vYAMZtS/D9IBaLb3+iqciPwZbnW1RX+jWU+Idb65WoUogqbrE0mKD veq1TH9AEvYpkLUuFol9Xq4NBn316sZvpsSAfmbkMphVwoF2L2gaE+e0CMSPFfll idBKE4RysALBsySWFPf4Kvp2jJCG5XHZU+uSR3jF1WNm3bc7cMV//nOjC8SeU5LX qzLs7X8VtEfo/fT8YfZlvuP2qo2OEq1DSg5PJMoFU5BIiV6ZAe2Qbj6I0MLflOoO H1OXG+0oGHMf3WAFbzLqnX/o5I0Q0LBRIMs3CTi4S5/4jexg9jr+tEf9qROVK3Mn EgRWvjboGvDacEkv93fSA0nT+XfnBn+sGXrVALmhOBcIbWg4ZarqHOjfwrPpnrtG bukGXaMzbp8aWS39U7HeMV0Jve8di9uVWUSkG2J9drLGWORGwtU= =ZAT+ -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "A small set of updates for the arm64 defconfig to enable more drivers, plus a bit for housekeeping on some of the arm32 defconfigs on particular SoC families" * tag 'soc-defconfig-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm: defconfig: drop RT_GROUP_SCHED=y from bcm2835/tegra/omap2plus arm64: defconfig: Enable USB retimer and redriver arm64: defconfig: Build NSS Clock Controller driver for IPQ9574 arm64: defconfig: Enable SPI NAND flashes arm64: defconfig: Enable Synopsys HDMI receiver arm64: defconfig: Enable Rockchip UFS host driver arm64: defconfig: enable Qualcomm IRIS & VIDEOCC_8550 as module arm64: defconfig: Enable HSR protocol driver arm64: defconfig: Enable gb_beagleplay arm64: defconfig: enable DRM_DISPLAY_CONNECTOR as a module arm64: defconfig: Enable Qualcomm QCM2290 GPU clock controller ARM: shmobile: defconfig: Supplement DTB with ATAG information |
||
|
Linus Torvalds
|
a9fc230497 |
soc: driver updates for 6.15, part 1
These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware interfaces,
adding support for additional firmware features including SoC
identification and FF-A SRI callbacks as well as various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and Apple chips
There will be a follow up with a few more driver updates that are still
causing build regressions at the moment.
-----BEGIN PGP SIGNATURE-----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=QcjY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
||
|
Linus Torvalds
|
2f24482304 |
soc: devicetree updates for 6.15
There is new support for additional on-chip devices on Apple, Mediatek,
Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a combined
FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier STM32MP25,
the MP211, MP213, MP215, MP231, MP233 and MP235 models are based on one
or two Cortex-A35 cores but each feature a different set of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and
GPU cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already supported.
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite,
all based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588
"MNT Reform 2" laptop
-----BEGIN PGP SIGNATURE-----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=6ZZ6
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
|
||
|
Linus Torvalds
|
1a9239bb42 |
Networking changes for 6.15.
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
||
|
Linus Torvalds
|
e61f33273c |
Update zstd to the latest upstream release v1.5.7. Imported cleanly from the
upstream tag v1.5.7-kernel, which is signed by upstream's signing key EF8FE99528B52FFD. Link: https://github.com/facebook/zstd/releases/tag/v1.5.7 Link: https://github.com/facebook/zstd/releases/tag/v1.5.7-kernel Link: https://keyserver.ubuntu.com/pks/lookup?search=EF8FE99528B52FFD&fingerprint=on&op=index Signed-off-by: Nick Terrell <terrelln@fb.com> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEmIwAqlFIzbQodPwyuzRpqaNEqPUFAmfjI5oACgkQuzRpqaNE qPUZJA//foLgy1etgBSTaUbCCIFxOLguFjmH2qfs/0yGX1ekhlv5jXobyUmKhYVM q0WR3G4lS1MNC40T9zNoKR0GfmZGyrCjOlGkwMEwdNYc+4y5sWujbckE+Xl/mgld Gz1NEEentFNIeC5htnBX797PJldqawHl6OYax/+6gVZyeLPYfbNYtTGy30fQIvcz vdIR/KCR2XzHn8+xah1zga5Ey/8LAXpgoYY9Pu3J3HWFRTV35laUe0nZ8EQ1mW3q nGritp0453RFJgD1wHewp1CgJx9lAixPAMPZ5BCOqOxsCxyalbvefWc6u/cS3zJM KEeKChyF6k5VqaW4A9jVeKq+HoGfngYjFJmELeKG4vK1d2UwMeDZRJ2IfkKej7xK 0awM0E0LO95H0mWEPhI3bmNbcfOLiJ4TIdWcr/sztF8Vv7fxKkK67Bwk4NTYmyPv sgFZMEyw0eFYNf8/0j9FCATu7AgmbF3yes4vExuAy0cgZaiNxOxaAspRM2A8Tmdf WWiAIsS6ZYwp6L1Gm6Rva+GRB15I3wevxOuEJ4kTsVVgvzgLQ+N6Fn5H5g2zgb1Q hgRlJx6ivyRpoaJhbBB7tqNsK38lQ53i0DHQ21jkBHEPFmRzLnvC+D205Dz3tQK5 kwPAGOCbxoiQbqzhY4NOm75ZPxzy8OW7ygjow0HaX6fgv9Y9n9s= =+maf -----END PGP SIGNATURE----- Merge tag 'zstd-linus-v6.15-rc1' of https://github.com/terrelln/linux Pull zstd updates from Nick Terrell: "Update zstd to the latest upstream release v1.5.7. The two major motivations for updating Zstandard are to keep the code up to date, and to expose API's needed by Intel for the QAT compression accelerator. Imported cleanly from the upstream tag v1.5.7-kernel, which is signed by upstream's signing key EF8FE99528B52FFD" Link: https://github.com/facebook/zstd/releases/tag/v1.5.7 Link: https://github.com/facebook/zstd/releases/tag/v1.5.7-kernel Link: https://keyserver.ubuntu.com/pks/lookup?search=EF8FE99528B52FFD&fingerprint=on&op=index * tag 'zstd-linus-v6.15-rc1' of https://github.com/terrelln/linux: zstd: Import upstream v1.5.7 |
||
|
Linus Torvalds
|
592329e5e9 |
Summary
* Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems leading
to the removal of vm_table from kernel/sysctl.c. This increases modularity by
placing the ctl_tables closer to where they are actually used and at the same
time reducing the chances of merge conflicts in kernel/sysctl.c.
* ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the extra{1,2}
pointers as min/max values. This tightens the range of the values that users
can pass into the kernel effectively preventing {under,over}flows.
* Misc fixes
Correct grammar errors and typos in test messages. Update sysctl files in
MAINTAINERS. Constified and removed array size in declaration for
alignment_tbl
* Testing
- These have all been in linux-next for at least 1 month
- They have gone through 0-day
- Ran all these through sysctl selftests in x86_64
-----BEGIN PGP SIGNATURE-----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=0bcX
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
|
||
|
Linus Torvalds
|
336b4dae6d |
IOMMU Updates for Linux v6.15
Including:
- Core: IOMMUFD dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle in
the domain
- Give iommufd its own SW_MSI implementation along with some IRQ layer
rework
- Improvements to the handle attach API
- Core: Fixes for probe-issues from Robin
- Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
- AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
- ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework of
pm_runtime_put_autosuspend()
- Rockchip driver changes:
- Driver adjustments for recent DT probing changes
- S390 IOMMU changes:
- Support for IOMMU passthrough
- Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1
-----BEGIN PGP SIGNATURE-----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=a8Pd
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
|
||
|
Linus Torvalds
|
2e3fcbcc3b |
SCSI misc on 20250326
Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr, mpt3sas) and the removal of cxlflash. The only non-trivial core change is an addition to unit attention handling to recognize UAs for power on/reset and new media so the tape driver can use it. Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ+RQ2yYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe6DAQCdW/21 S1Y6BDlJLQfpWChGv6GIzanC+5sMfylw4d6ULgEA8upOE5L3fC29IY958jXig0o1 uLjxylwYEfVLDf8gwJ0= =mkM+ -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr, mpt3sas) and the removal of cxlflash. The only non-trivial core change is an addition to unit attention handling to recognize UAs for power on/reset and new media so the tape driver can use it" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits) scsi: st: Tighten the page format heuristics with MODE SELECT scsi: st: ERASE does not change tape location scsi: st: Fix array overflow in st_setup() scsi: target: tcm_loop: Fix wrong abort tag scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag scsi: hisi_sas: Fixed failure to issue vendor specific commands scsi: fnic: Remove unnecessary NUL-terminations scsi: fnic: Remove redundant flush_workqueue() calls scsi: core: Use a switch statement when attaching VPD pages scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2 scsi: ufs: renesas: Add reusable functions scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings scsi: ufs: renesas: Remove register control helper function scsi: ufs: renesas: Add register read to remove save/set/restore scsi: ufs: renesas: Replace init data by init code scsi: ufs: dt-bindings: renesas,ufs: Add calibration data scsi: mpi3mr: Task Abort EH Support scsi: storvsc: Don't report the host packet status as the hv status scsi: isci: Make most module parameters static scsi: megaraid_sas: Make most module parameters static ... |
||
|
Linus Torvalds
|
22093997ac |
ata changes for 6.15
- Add 'external' to the libata.force module parameter, in order to
allow a user to workaround broken firmware (me)
- Use the str_up_down() helper in the sata_via driver (Salah Triki)
- Convert the Freescale PowerQUICC SATA device tree binding to YAML
(J. Neuschäfer)
- Do not use ATAPI DMA for a device that only supports PIO (me)
- Add Marvell 88SE9215 PCI device ID to the ahci driver.
Since the controller has quirks, it cannot rely on the generic
AHCI PCI class code entry (Daniel Kral)
- Improve the return value of atapi_check_dma() (Huacai Chen)
- Fix the NCQ Non-Data log not supported print to actually reference
the correct log (me)
- Make Marvel 88SE9215 prefer DMA for ATAPI devices (Huacai Chen)
- Simplify the AHCI IRQ vector allocations by performing the IRQ
vector allocations in the same function, regardless of IRQ type
(Tomas Henzl)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZ+MDSwAKCRDJZDGjmcZN
ctr2AQCu7c9GPgL6VbVIzgoTdHqN39f7YuyajWxsNKi0832CTAEAkkk2exqa1tMy
3gFmHcKqm1PoWD2VhjU6odzHy0UtQQY=
=61mg
-----END PGP SIGNATURE-----
Merge tag 'ata-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Add 'external' to the libata.force module parameter, in order to
allow a user to workaround broken firmware (me)
- Use the str_up_down() helper in the sata_via driver (Salah Triki)
- Convert the Freescale PowerQUICC SATA device tree binding to YAML
(J. Neuschäfer)
- Do not use ATAPI DMA for a device that only supports PIO (me)
- Add Marvell 88SE9215 PCI device ID to the ahci driver. Since the
controller has quirks, it cannot rely on the generic AHCI PCI class
code entry (Daniel Kral)
- Improve the return value of atapi_check_dma() (Huacai Chen)
- Fix the NCQ Non-Data log not supported print to actually reference
the correct log (me)
- Make Marvel 88SE9215 prefer DMA for ATAPI devices (Huacai Chen)
- Simplify the AHCI IRQ vector allocations by performing the IRQ vector
allocations in the same function, regardless of IRQ type (Tomas
Henzl)
* tag 'ata-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: simplify init function
ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
ata: libata: Fix NCQ Non-Data log not supported print
ata: libata: Improve return value of atapi_check_dma()
ahci: add PCI ID for Marvell 88SE9215 SATA Controller
ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
dt-bindings: ata: Convert fsl,pq-sata to YAML
ata: sata_via: Use str_up_down() helper in vt6420_prereset()
ata: libata-core: Add 'external' to the libata.force kernel parameter
|
||
|
Linus Torvalds
|
9b960d8cd6 |
for-6.15/block-20250322
-----BEGIN PGP SIGNATURE-----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=Ci5m
-----END PGP SIGNATURE-----
Merge tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
|
||
|
Linus Torvalds
|
91928e0d3c |
for-6.15/io_uring-20250322
-----BEGIN PGP SIGNATURE-----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=VEQr
-----END PGP SIGNATURE-----
Merge tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
|
||
|
Linus Torvalds
|
1e1ba8d23d |
Updates for clocksource/event drivers:
- Add support for suspend/resume in the STM32 LP-Timer driver with a
follow up fix, which uses the proper method to setup the timer as a
optional wakeup source instead of trying to force it as mandatory
wakeup source.
- The usual device tree updates to enable new SoC models in existing
drivers.
- Trivial spelling, style and indentation fixes
-----BEGIN PGP SIGNATURE-----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=hwyg
-----END PGP SIGNATURE-----
Merge tag 'timers-clocksource-2025-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource/event updates from Thomas Gleixner:
- Add support for suspend/resume in the STM32 LP-Timer driver with a
follow up fix, which uses the proper method to setup the timer as a
optional wakeup source instead of trying to force it as mandatory
wakeup source.
- The usual device tree updates to enable new SoC models in existing
drivers.
- Trivial spelling, style and indentation fixes
* tag 'timers-clocksource-2025-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: timer: Add SiFive CLINT2
clocksource/drivers/stm32-lptimer: Use wakeup capable instead of init wakeup
clocksource/drivers/exynos_mct: Fixed a spelling error
clocksource/drivers/stm32-lptimer: Add support for suspend / resume
dt-bindings: timer: exynos4210-mct: add samsung,exynos2200-mct-peris compatible
dt-bindings: timer: exynos4210-mct: Add samsung,exynos990-mct compatible
dt-bindings: timer: Correct indentation and style in DTS example
|
||
|
Linus Torvalds
|
87dc996d56 |
A urgent fix for the XEN related PCI/MSI changes:
XEN used a global variable to disable the masking of MSI interrupts as XEN handles that on the hypervisor side. This turned out to be a problem with VMD as the PCI devices behind a VMD bridge are not always handled by the hypervisor and then require masking by guest. To solve this the global variable was replaced by a interrupt domain specific flag, which is set by the generic XEN PCI/MSI domain, but not by VMD or any other domain in the system. So far, so good. But the implementation (and the reviewer) missed the fact, that accessing the domain flag cannot be done directly because there are at least two situations, where this fails. Legacy architectures are not providing interrupt domains at all. The new MSI parent domains do not require to have a domain info pointer. Both cases result in a unconditional NULL pointer derefence. The PCI/MSI code already has a function to query the MSI domain specific flag in a safe way, which handles all possible cases of PCI/MSI backends. So the fix it simply to replace the open coded checks by invoking the safe helper to query the flag. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmfkUA4THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoVymD/4xvcTnjjBQgesBWtkZ/wyvOx+zAoZD s6ikEnYVzG6jjiob9SXrttJS/fZDuFujmntvq1lp+Lw1MbK/k9qyeKpMUkjVw4V5 gHgPUZUkKapk2Jf3vYy23cb8CuRp9nANi7r//kzefN/pyEmfuqme3AYNJjusyEyn QfhLGE046GI2PLLS+4FKUjk+/aPEk/Pywy3moaSpDVd8Kmsus5GTmxt/AWcwGfcw 00TSRKstpew+RVLBb7NvSar0D43vtvP/8If6qkIpEttVhB6/4zTREB1z6iPjUSf0 2+90iubCdSm8wO+y0JDmA13cUct2XqW19M75imSLBIsJAlVtgWgOi2IJF787vDPJ 3bN2HeScCbl8+0e4Uv+NOi2c906k43MtC4XTrIq0nZjAuRyF9FEtdK+IrcywxuKH nuaHtlseGWg97kU49yDTi1k+tRvIpmsibKM4pKZoUZKNMfE2soCFjzj40O7hTcKJ LaN/fcDdPGnn+GMPywwIWc7e6kOIYnCqakom/x7e+KWpqfujnM3KLiyOy9iys/oL xXfKnMbbmL0CSdUrC7EJn20KFRA2ovAJ+ouzJRkFhCdERCVidY29O3VrstacbevS zQKb302PbFraGHa/MiuzyF0BuWuM0T0d12+2wEoVJpN/GTAbgO2vVbk2gvHEReXJ eMDn02f5lF659w== =ZPMY -----END PGP SIGNATURE----- Merge tag 'irq-urgent-2025-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI irq fix from Thomas Gleixner: "An urgent fix for the XEN related PCI/MSI changes: XEN used a global variable to disable the masking of MSI interrupts as XEN handles that on the hypervisor side. This turned out to be a problem with VMD as the PCI devices behind a VMD bridge are not always handled by the hypervisor and then require masking by guest. To solve this the global variable was replaced by a interrupt domain specific flag, which is set by the generic XEN PCI/MSI domain, but not by VMD or any other domain in the system. So far, so good. But the implementation (and the reviewer) missed the fact, that accessing the domain flag cannot be done directly because there are at least two situations, where this fails. Legacy architectures are not providing interrupt domains at all. The new MSI parent domains do not require to have a domain info pointer. Both cases result in a unconditional NULL pointer derefence. The PCI/MSI code already has a function to query the MSI domain specific flag in a safe way, which handles all possible cases of PCI/MSI backends. So the fix it simply to replace the open coded checks by invoking the safe helper to query the flag" * tag 'irq-urgent-2025-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Handle the NOMASK flag correctly for all PCI/MSI backends |
||
|
Linus Torvalds
|
f6e0150b20 |
* MTD changes:
The atmel,dataflash binding has been converted to yaml and the physmap
one constrained. Some logs are improved, error path are getting reworked
a bit, few patches target the use of str_enabled_disabled().
* Raw NAND changes:
i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
* SPI NAND changes:
Two main features have been added:
- OTP support has been brought, and ESMT and Micron manufacturer drivers
implement it.
- Read retry, and Macronix manufacturer driver implement it.
* SPI NOR changes:
Adding support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start using
the scope based mutex cleanup helpers.
There is as well a bunch of minor improvements and fixes in drivers and
bindings.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmfkMTQACgkQJWrqGEe9
VoS+Fgf/apT4C5115f4EolKAcato3QpJ+J1+S0Oy6yYSKQVwKNa4NkdBIeKXfQLc
rjNdsoE9RmibCKViX3D3rjlMnynbkIr4F3YHbgP4lz7y2TQUVA7Dy0sp2RX+9M3G
+a5u6lfUyGA/uzJPJUESaPpjLWLg5uTRcduD8hGVid9D+/KFYWNF0EsufobT8JmT
X/R+aVS58W0uqLEJtiaINsD6D3f8ukMZCNgsvuAUINSUNUrX61pVQZwQAZ4eCCNa
W+YaLdsMtrwRBdoRGXfrElHEvnufglYocUo+9h8EOVMQ84rfNH363Nu+1WxTVGDj
GLB5O9knQFy7DR0M4gYBAqqji41nTg==
=O/Ud
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD changes:
- The atmel,dataflash binding has been converted to yaml and the
physmap one constrained. Some logs are improved, error path are
getting reworked a bit, few patches target the use of
str_enabled_disabled().
Raw NAND changes:
- i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
SPI NAND changes:
- OTP support has been brought, and ESMT and Micron manufacturer
drivers implement it.
- Read retry, and Macronix manufacturer driver implement it.
SPI NOR changes:
- Adding support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start
using the scope based mutex cleanup helpers.
There is also a bunch of minor improvements and fixes in drivers
and bindings"
* tag 'mtd/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (34 commits)
dt-bindings: mtd: atmel,dataflash: convert txt to yaml
mtd: mchp48l640: Use str_enable_disable() in mchp48l640_write_prepare()
mtd: rawnand: gpmi: Use str_enabled_disabled() in gpmi_nand_attach_chip()
mtd: mtdpart: Do not supply NULL to printf()
dt-bindings: mtd: gpmi-nand: Add compatible string for i.MX8 chips
mtd: nand: Fix a kdoc comment
mtd: spinand: Improve spinand_info macros style
mtd: spi-nor: drop unused <linux/of_platform.h>
mtd: spi-nor: explicitly include <linux/of.h>
mtd: spi-nor: explicitly include <linux/math64.h>
mtd: spi-nor: macronix: add support for mx66{l2, u1}g45g
mtd: spi-nor: macronix: Add post_sfdp fixups for Quad Input Page Program
mtd: Fix error handling in mtd_device_parse_register() error path
mtd: capture device name setting failure when adding mtd
mtd: Add check for devm_kcalloc()
mtd: Replace kcalloc() with devm_kcalloc()
dt-bindings: mtd: physmap: Ensure all properties are defined
mtd: rawnand: brcmnand: fix PM resume warning
dt-bindings: mtd: mxc-nand: Document fsl,imx31-nand
mtd: spinand: macronix: Add support for read retry
...
|
||
|
Linus Torvalds
|
5e06802b42 |
hid-for-linus-2025032601
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEL65usyKPHcrRDEicpmLzj2vtYEkFAmfj+cIACgkQpmLzj2vt YEke2A//a9qWGV2K8oeC2uKxoL7o66LmiMcoAhmKwfVeDHq29IWRE0oVdIJmqK9F bCMRzq6aiNG5F6kBt03L5kDrJ34GDSphfmNJezVuVVST7TDDba/qLqmJQxGmFpyR DZu+8QhD3r1NAI+vd+Ay+7TD21u1DKGLM4tcsDTyebWvZj2sDFLOcXphrFlvV/2K zM/GAk7kFt2rbeAqBLL5CzQZNEdy4r9xZNJQxSOYSYw11C/ke5j2MmXbna4Dybnp mpdeHd+LF2BEytfLQDWaD6ZFTLgyOV/PCSSpM5WPGun6j58cTRH2gLu1g6E38SRa uDpZBdurPKX1UQpozVqbVpUoaedQ9fpVVlsUCulyKNJHZP9ovMywrghmzSGAIF4u 9R78hsO4eBwHXYz6aC/+giKtwtvRW3DrxKhYBiHlntQSmH/cAtZHkhoY1k4LWo5/ Fj9zi0QADk4Z92P2dbMkMwtSgqM5wkQ13/pHBVtcsOqHLi35lD/DTthtFj3t/KbQ bxue7HE9m/BqitQ34yRMsm1Sx9ztjwQ2UWA/NReJysGwxf4USgAdeBRcxfCPGdjh knqVskMhWTDUFlWpB4B91Wx8zZP/N7dxRjExVqo3nvVGTR196nhB63KRsE+omkPc NTKq1a0ROlbEu4NtzGFTB0T/R8H9mPrRfORgCaTrW7ZtpqPox2A= =GXpz -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - PlayStation 5 controllers support (Alex Henrie) - big revamp and modernization of the aged hid-pidff force feedback driver (Tomasz Pakuła) - conversion of hid-lg-g15 to standard multicolor LED API (Kate Hsuan) - improvement of behavior of Human Presence Sensor (HPD) in amd_sfh driver (Mario Limonciello) - other assorted fixes, code cleanups and device ID additions * tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (70 commits) HID: remove superfluous (and wrong) Makefile entry for CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER HID: Intel-thc-hid: Intel-quickspi: Correct device state names gramatically HID: wacom: Remove static WACOM_PKGLEN_MAX limit HID: amd_sfh: Don't show wrong status for amd_sfh_hpd_info() HID: amd_sfh: Default to HPD disabled HID: amd_sfh: Allow configuring whether HPD is enabled or disabled HID: pidff: Fix set_device_control() HID: pidff: Fix 90 degrees direction name North -> East HID: pidff: Compute INFINITE value instead of using hardcoded 0xffff HID: pidff: Clamp effect playback LOOP_COUNT value HID: pidff: Rename two functions to align them with naming convention HID: lenovo: silence unreachable code warning HID: lenovo: Fix to ensure the data as __le32 instead of u32 HID: bpf: add a v6.11+ compatible BPF fixup for the XPPen ACK05 remote HID: bpf: new hid_bpf_async.h common header HID: bpf: import new kfunc from v6.10 & v6.11 HID: bpf: add support for the XP-Pen Artist Pro 19 (gen2) HID: bpf: Added updated Kamvas Pro 19 descriptor HID: bpf: Suppress bogus F13 trigger on Sirius keyboard full fan shortcut HID: bpf: Add support for the default firmware mode of the Huion K20 ... |
||
|
Linus Torvalds
|
fb1ceb29b2 |
platform-drivers-x86 for v6.15-1
Highlights:
- alienware-wmi: Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities: Support for mic & audio mute LEDs
- samsung-galaxybook: Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl: RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
alienware-wmi:
- Add a state container for LED control feature
- Add a state container for thermal control methods
- Add alienware-wmi.h
- Add WMI Drivers
- Refactor hdmi, amplifier, deepslp methods
- Refactor LED control methods
- Refactor thermal control methods
- Rename alienware-wmi.c
- Split DMI table
- Split the alienware-wmi driver
- Update alienware-wmi config entries
- Update header and module information
amd/pmc:
- fix leak in probe()
- Move macros and structures to the PMC header file
- Notify user when platform does not support s0ix transition
- Remove unnecessary line breaks
- Use managed APIs for mutex
amd/pmf:
- convert timeouts to secs_to_jiffies()
amd:
- Use *-y instead of *-objs in Makefiles
arm64:
- add Huawei Matebook E Go EC driver
arm64: dts: qcom: gaokun3:
- Add Embedded Controller node
compal-laptop:
- Do not include <linux/fb.h>
dell-ddv:
- Fix temperature calculation
- Use devm_battery_hook_register
- Use the power supply extension mechanism
dell: dell-wmi-sysman:
- Use *-y instead of *-objs in Makefile
dell:
- Modify Makefile alignment
- Use *-y instead of *-objs in Makefile
dell-uart-backlight:
- Make dell_uart_bl_serdev_driver static
dt-bindings: platform:
- Add Huawei Matebook E Go EC
hp-bioscfg:
- Replace deprecated strncpy() with strscpy()
- Use wmi_instance_count()
hp:
- Use *-y instead of *-objs in Makefile
hwmon:
- (hp-wmi-sensors) Use the WMI bus API when accessing sensors
ideapad-laptop:
- use dev_groups to register attribute groups
int3472:
- Call "func" "con_id" instead
intel/pmc:
- Add Arrow Lake U/H support to intel_pmc_core driver
- Add Panther Lake support to intel_pmc_core
- Create generic_core_init() for all platforms
- Make tgl_core_generic_init() static
- Move arch specific action to init function
- Remove duplicate enum
- Remove simple init functions
- Remove unnecessary declarations in header
- Remove unneeded extern keyword in header
intel:
- Use *-y instead of *-objs in Makefile
irqdomain: platform/x86:
- Switch to irq_domain_create_linear()
lenovo-wmi-hotkey-utilities.c:
- Support for mic and audio mute LEDs
lenovo-yoga-tab2-pro-1380-fastcharger:
- Make symbol static
MAINTAINERS:
- Add documentation reference for Mellanox platform
- Update ALIENWARE WMI DRIVER entry
mellanox:
- Relocate mlx-platform driver
mlxbf-bootctl:
- Support sysfs entries for RTC battery status
mlx-platform:
- Change register name
- Cosmetic changes
samsung-galaxybook:
- Add samsung-galaxybook driver
- Fix block_recording not supported logic
sonypi:
- Use str_on_off() helper in sonypi_display_info()
think-lmi:
- Use ACPI object when extracting strings
- Use WMI bus API when accessing BIOS settings
thinkpad_acpi:
- check the return value of devm_mutex_init()
- convert timeouts to secs_to_jiffies()
- Do not include <linux/fb.h>
- Move HWMON initialization to tpacpi_hwmon_pdriver's probe
- Move subdriver initialization to tpacpi_pdriver's probe.
tools/power/x86/intel-speed-select:
- Die ID for IO dies
- Fix the condition to check multi die system
- Prefix header search path with sysroot
- Prevent increasing MAX_DIE_PER_PACKAGE
- v1.22 release
wmi:
- Call WCxx methods when setting data blocks
- Rework WCxx/WExx ACPI method handling
- Update documentation regarding the GUID-based API
- Use devres to disable the WMI device
x86-android-tablets:
- Add select POWER_SUPPLY to Kconfig
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ+QJyQAKCRBZrE9hU+XO
MUPYAP4sjtB8DKTIHgiQqado7PJZmdgpeJfAplitwKGe4BOcEQEA1mhuqMA5n6S+
jvbTtRF+jiKxis/5zAtAdChScM/pIgo=
=W+gy
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
|
||
|
Miquel Raynal
|
2dd33fc2a8 |
* Raw NAND changes:
i.MX8 and i.MX31 now have their own compatible, the Qcom driver got cleaned, the Broadcom driver got fixed. * SPI NAND changes: Two main features have been added: - OTP support has been brought, and ESMT and Micron manufacturer drivers implement it. - Read retry, and Macronix manufacturer driver implement it. There is as well a bunch of minor improvements and fixes in drivers and bindings. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmfkLyUACgkQJWrqGEe9 VoTj/gf/UFLUlbCTTLpiKItXTTywW7EEe/8ZvVoki/D6gzKrjfMnVzYjxpLqYCnc Qps6RtHPX8Xkq2f7FMFCxu6t49PLFjvo8JIdEC7Q1Bxf3JLAPtQXIXZfl+frtNnc MqctdU4BU9up8u1mCajjzSWtaCeU3YBwNtH9fPMS65b5dfg1vfXr7oA/NqfMg3ql b4dMYHXzPHk6TP59q3yaTqkFf92yXzgEUjM651uoAIzafVSpVHyOZriDit8A/A3f lBM0+SEhEPBBhMvWf0FgzlqWidmCE+LZPTypdkgVamvqYPh/KYFUs14UDmJd/M1t TwXf+Q5c6mnGfmiVVvfM1icp0Lyr+Q== =W0/k -----END PGP SIGNATURE----- Merge tag 'nand/for-6.15' into mtd/next * Raw NAND changes: i.MX8 and i.MX31 now have their own compatible, the Qcom driver got cleaned, the Broadcom driver got fixed. * SPI NAND changes: Two main features have been added: - OTP support has been brought, and ESMT and Micron manufacturer drivers implement it. - Read retry, and Macronix manufacturer driver implement it. There is as well a bunch of minor improvements and fixes in drivers and bindings. |
||
|
Miquel Raynal
|
59ee921ca7 |
SPI NOR adds support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start using the scope based mutex cleanup helpers. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmfZD0wACgkQS1VPR6WN FOn+RAf+MnyaYWP20nCRoI8Amkemqxzp6oOLQWT6TPSRACyz90V2NGJqSolq2eUE 0pYpjAYmksFIqjTTgR90m0/KBh/+xuGzVQT2Ej2/UEuuE92Y5ZcXk6rUy0TSKAoS ZE5MvHs7n9TYr1yXbh0Ow6ITkQR3IS1DgII90XuGBdRoZrWnfWCt/tYzacFJ8F37 2ENUKggLacldAIWguCVyamq8WOFFstxXg3d8oHNR/uUHs9qB3n/5vgnjLvKFIkqc adejnSFR+LCwXOqpgbs9BuI3D+E70Hh+cvAcw1y+jPRHckJRYGCKiemZO2GFBkmi iMDn/avxf7WEIYlgcwC0TpxnFRtqxA== =6zFA -----END PGP SIGNATURE----- Merge tag 'spi-nor/for-6.15' into mtd/next SPI NOR adds support for few flashes. Few cleanup patches for the core driver, where we touched the headers inclusion list and we start using the scope based mutex cleanup helpers. |
||
|
Linus Torvalds
|
e50da555ca |
sound updates for 6.15-rc1
We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific,
little about the core changes. Some highlights below:
Core:
* A couple of (rather minor) race fixes in ALSA sequencer code
* A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
* A large series of code conversion to use modern terminology for the
clocking configuration
* Conversions of PM ops with the modern macros in all ASoC drivers
* Clarification of the control operations
* Prepartory work for more generic SoundWire SCDA controls
* Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
* Conversions of PM ops with the modern macros in the rest drivers
* USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
* HD-audio quirks and fixes ASUS, HP, Lenovo, and others
Note that the PR contains some changes from the tip tree for AMD code,
and it might give some merge conflict due to the rebase afterwards.
-----BEGIN PGP SIGNATURE-----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=NaAN
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific, little
about the core changes. Some highlights below:
Core:
- A couple of (rather minor) race fixes in ALSA sequencer code
- A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
- A large series of code conversion to use modern terminology for the
clocking configuration
- Conversions of PM ops with the modern macros in all ASoC drivers
- Clarification of the control operations
- Prepartory work for more generic SoundWire SCDA controls
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
- Conversions of PM ops with the modern macros in the rest drivers
- USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
- HD-audio quirks and fixes ASUS, HP, Lenovo, and others"
* tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (651 commits)
ALSA: hda: tas2781-i2c: Remove unnecessary NULL check before release_firmware()
ALSA: hda: cs35l56: Remove unnecessary NULL check before release_firmware()
ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA
ALSA: hda/realtek: Fix built-in mic assignment on ASUS VivoBook X515UA
ALSA: hda/realtek: Add support for various HP Laptops using CS35L41 HDA
ALSA: timer: Don't take register_mutex with copy_from/to_user()
ASoC: SDCA: Correct handling of selected mode DisCo property
ASoC: amd: yc: update quirk data for new Lenovo model
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3247
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3315
ASoC: SOF: mediatek: Commonize duplicated functions
ASoC: dmic: Fix NULL pointer dereference
ASoC: wm8904: add DMIC support
ASoC: wm8904: get platform data from DT
ASoC: dt-bindings: wm8904: Add DMIC, GPIO, MIC and EQ support
ASoC: wm8904: Don't touch GPIO configs set to 0xFFFF
of: Add of_property_read_u16_index
ALSA: oxygen: Fix dependency on CONFIG_PM_SLEEP
ASoC: ops: Apply platform_max after deciding control type
ASoC: ops: Remove some unnecessary local variables
...
|
||
|
Jakub Kicinski
|
023b1e9d26 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes to prepare for the 6.15 net-next PR. No conflicts, adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c |
||
|
Stephen Rothwell
|
705094f655 |
unix: fix up for "apparmor: add fine grained af_unix mediation"
After merging the apparmor tree, today's linux-next build (x86_64
allmodconfig) failed like this:
security/apparmor/af_unix.c: In function 'unix_state_double_lock':
security/apparmor/af_unix.c:627:17: error: implicit declaration of function 'unix_state_lock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
627 | unix_state_lock(sk1);
| ^~~~~~~~~~~~~~~
| unix_state_double_lock
security/apparmor/af_unix.c: In function 'unix_state_double_unlock':
security/apparmor/af_unix.c:642:17: error: implicit declaration of function 'unix_state_unlock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
642 | unix_state_unlock(sk1);
| ^~~~~~~~~~~~~~~~~
| unix_state_double_lock
Caused by commit
|
||
|
Thomas Gleixner
|
3ece3e8e59 |
PCI/MSI: Handle the NOMASK flag correctly for all PCI/MSI backends
The conversion of the XEN specific global variable pci_msi_ignore_mask to a
MSI domain flag, missed the facts that:
1) Legacy architectures do not provide a interrupt domain
2) Parent MSI domains do not necessarily have a domain info attached
Both cases result in an unconditional NULL pointer dereference. This was
unfortunatly missed in review and testing revealed it late.
Cure this by using the existing pci_msi_domain_supports() helper, which
handles all possible cases correctly.
Fixes:
|
||
|
Daniel Hsu
|
70facbf978 |
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
Previously, the condition for invalidating the tx flow in mctp_i2c_invalidate_tx_flow() checked if `rc` was nonzero. However, this could incorrectly trigger the invalidation even when `rc > 0` was returned as a success status. This patch updates the condition to explicitly check for `rc < 0`, ensuring that only error cases trigger the invalidation. Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jiri Kosina
|
4ee4d7b177 |
Merge branch 'for-6.15/wacom' into for-linus
- removal of WACOM_PKGLEN_MAX limit in Wacom driver (Jason Gerecke) |
||
|
Jiri Kosina
|
6fe38a26b2 |
Merge branch 'for-6.15/usb-hidbp' into for-linus
- fix for LED_KANA handling in hidbp (junan) |
||
|
Jiri Kosina
|
795b318f05 |
Merge branch 'for-6.15/steam' into for-linus
- code cleanup (Vicki Pfau) |
||
|
Jiri Kosina
|
82931ba4c1 |
Merge branch 'for-6.15/sony' into for-linus
- PlayStation 5 controllers support (Alex Henrie) |
||
|
Jiri Kosina
|
74ed6b5bad |
Merge branch 'for-6.15/plantronics' into for-linus
- improved mute handling (Terry Junge) |
||
|
Jiri Kosina
|
765b8aa0f7 |
Merge branch 'for-6.15/pidff' into for-linus
From: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> This patch series is focused on improving the compatibility and usability of the hid-pidff force feedback driver. Last patch introduces a new, universal driver for PID devices that need some special handling like report fixups, remapping the button range, managing new pidff quirks and setting desirable fuzz/flat values. This work has been done in the span of the past months with the help of the great Linux simracing community, with a little input from sim flight fans from FFBeast. No changes interfere with compliant and currently working PID devices. "Generic" codepath was tested as well with Moza and Simxperience AccuForce v2. I'm not married to the name. It's what we used previously, but if "universal" is confusing (pidff is already the generic driver), we can come up with something better like "hid-quirky-pidff" :) With v8 and tiny finx in v9, all the outstanding issues were resolved, additional pidff issues were fixed and hid-pidff defines moved to a dedicated header file. This patch series could be considered done bar any comments and requests from input maintainers. I could save more then a dozen lines of code by changing simple if statements to only occupy on line instead of two in there's a need for that. |
||
|
Jiri Kosina
|
867bc163da |
Merge branch 'for-6.15/logitech' into for-linus
- conversion of hid-lg-g15 to standard multicolor LED API (Kate Hsuan) |
||
|
Jiri Kosina
|
880d010ca5 |
Merge branch 'for-6.15/lenovo' into for-linus
- code cleanups (Dan Carpenter, Vishnu Sankar) |
||
|
Jiri Kosina
|
071b38ee09 |
Merge branch 'for-6.15/intel-thc' into for-linus
- removal of deprecated PCI API calls (Philipp Stanner) - code cleanups (Even Xu) |
||
|
Jiri Kosina
|
770493524e |
Merge branch 'for-6.15/intel-ish' into for-linus
- intel-ish Kbuild cleanup (Jiri Kosina) |
||
|
Jiri Kosina
|
e4f7cc8c36 |
Merge branch 'for-6.15/google' into for-linus
- small include cleanup (Wolfram Sang) |
||
|
Jiri Kosina
|
b928908e9b |
Merge branch 'for-6.15/core' into for-linus
- differentiate warning for reserved item tag from unknown item tag, in accordance to 6.2.2.4 from the HID specification 1.11 (Tatsuya S) |
||
|
Jiri Kosina
|
5d28bc6b49 |
Merge branch 'for-6.15/bpf' into for-linus
- a few hid-bpf device fixes from udev-hid-bpf; XP-Pen and Huion plus one from TUXEDO (Benjamin Tissoires) |
||
|
Jiri Kosina
|
ac91d5c718 |
Merge branch 'for-6.15/apple' into for-linus
- support for Apple Touch Bars (Kerem Karabay, Aditya Garg) |
||
|
Jiri Kosina
|
b3cc7428a3 |
Merge branch 'for-6.15/amd_sfh' into for-linus
From: Mario Limonciello <mario.limonciello@amd.com> Some platforms include a human presence detection (HPD) sensor. When enabled and a user is detected a wake event will be emitted from the sensor fusion hub that software can react to. Example use cases are "wake from suspend on approach" or to "lock when leaving". This is currently enabled by default on supported systems, but users can't control it. This essentially means that wake on approach is enabled which is a really surprising behavior to users that don't expect it. Instead of defaulting to enabled add a sysfs knob that users can use to enable the feature if desirable and set it to disabled by default. |
||
|
Linus Torvalds
|
1e26c5e28c |
[GIT PULL for v6.15] media updates
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmfbCbgACgkQCF8+vY7k 4RX20A/+Lec4h7TqDC3ctPHVvZ6dN+xMjqx5RnhsJ2yo7NqrbgrZ1HAC6nNkUCAP ZbhVUBEVYN3pxCiA1Qj6YuainQkWW5qPIB1ACQ/spdXacluQaPuub03LXLzbn6Qh inojtO1v04q2LPtnl7Lv1F0aUbXQK2JPMOlByrgX/XdFYq3B91uV5Z7SeBnsSshW usOdh3Dv1QmIlHvlSLFlAVPAE1PdfvDmV3XmhSy4HZM+zhQjYia563F+9lj5tUe9 F7mX7fGlh9AL2uiucH7GlW3U6+SNc0JwNr3Ra9LdBvqksU8TYp1Dt+lvqpscTyuY DPMZS5i/YfZPFukPNGMf7RKKP9/gaKWza684PTq5XsASUAiGwpsiyPHM2rJYXf9u kAzLJH7vk7sLdssgjFONwOLJlD93EXclT7myDpNCbAyD7tni7iTfGyxmNYFFLc/w NzqfowZfHSxYwDYzoXUGcU2lksMqWrHF+8oO2de0NUxhrLjawcGj3acCe1R4zU0W CoKDCI8YXoBI2YNrF1Nvnca/2qkPXi1IKyVdiDGMv4aeuja2hB8Z2IKssSP8Jjlp ui97q2MR/WwYAKkNTyH8F0kV6x6E5FqVbVAm6wp+d4uzi2QSGPFD8kuXwTmohYGa ZbVXBtjM3ZxO5rb/LsCPAPy9USR3J3Jkt5rVfaRo+EusU+8Iqig= =RsqI -----END PGP SIGNATURE----- Merge tag 'media/v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets - vim2m: print device name after registering device - Synopsys DesignWare HDMI RX Driver and various fixes - cec/printk fixes and the removal of the vidioc_g/s_ctrl and vidioc_queryctrl callbacks - AVerMedia H789-C PCIe support and rc-core structs padding - Several camera sensor patches - uvcvideo improvements - visl: Fix ERANGE error when setting enum controls - codec fixes - V4L2 camera sensor patches mostly - chips-media: wave5: Fixes - Add SDM670 camera subsystem - Qualcomm iris video decoder driver - dt-bindings: update clocks for sc7280-camss - various fixes and enhancements * tag 'media/v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (264 commits) media: pci: mgb4: include linux/errno.h media: synopsys: hdmirx: Fix signedness bug in hdmirx_parse_dt() media: platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets media: vim2m: print device name after registering device media: vivid: Introduce VIDEO_VIVID_OSD media: vivid: Move all fb_info references into vivid-osd media: platform: synopsys: hdmirx: Optimize struct snps_hdmirx_dev media: platform: synopsys: hdmirx: Remove unused HDMI audio CODEC relics media: platform: synopsys: hdmirx: Remove duplicated header inclusion media: qcom: Clean up Kconfig dependencies media: dvb-frontends: tda10048: Make the range of z explicit. media: platform: stm32: Add check for clk_enable() media: xilinx-tpg: fix double put in xtpg_parse_of() media: siano: Fix error handling in smsdvb_module_init() media: c8sectpfe: Call of_node_put(i2c_bus) only once in c8sectpfe_probe() media: i2c: tda1997x: Call of_node_put(ep) only once in tda1997x_parse_dt() dt-bindings: media: mediatek,vcodec: Revise description dt-bindings: media: mediatek,jpeg: Relax IOMMU max item count media: v4l2-dv-timings: prevent possible overflow in v4l2_detect_gtf() media: rockchip: rga: fix rga offset lookup ... |
||
|
Linus Torvalds
|
c84907a145 |
auxdisplay for v6.15-1
* Refactor a couple of APIs to reduce amount of calls to memory allocator * Miscellaneous small fixes and improvements The following is an automated git shortlog grouped by driver: charlcd: - Partially revert "Move hwidth and bwidth to struct hd44780_common" gpiolib: - add gpiod_multi_set_value_cansleep() hd44780: - Rename hd to hdc in hd44780_common_alloc() - Call charlcd_alloc() from hd44780_common_alloc() - Make use of hd44780_common_free() - Introduce hd44780_common_free() - Fix an API misuse in hd44780.c lcd2s: - Allocate memory for custom data in charlcd_alloc() MAX6959 should select BITREVERSE: - MAX6959 should select BITREVERSE panel: - Make use of hd44780_common_free() - Fix an API misuse in panel.c seg-led-gpio: - use gpiod_multi_set_value_cansleep -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmfizF8ACgkQb7wzTHR8 rCgJQw/+Mdwx/5mFZ6GFLzVVEtDnqJx8SHs2wwBiQuA/l8vd587bbC8TtqnNZuc2 kDucQxVdXXW4Fi5Szd+aPtCuYEKFOauLHMkn8JPLvvd/Z862k3rrYME2oDj7a7I2 MLujywMWhlGiceNIL9lU5CnuVPW+IsUhunsahvVS98SlSoc8/aNZ3ezowUCaMTTs xfTAbByvf5BM8bfsZtlCldiKDxhr6VCgJCastZTwhpjtJ0GT4BpvYaz2NqbTLfpT 6aNjCdUdNNWyzlY44MlCOQgxx+5GyyDmelNLnYnAN2/FqRWoVc1Wa9PQf+sGUSIz PSbkA/FIRDPZGWPmyPvEGIj9PFXlb5DCIpl1UlX+o1UuiOXuzBGK7xzs6ypRxHui rs14qLrtayIwklejwPBBPdYZ9MHAfL1H5DmgeBEz0yx5LXGtrYSnL3G1gtoc/BDL BqbV5kKaBlg/BOcsyCNcfNO0E9LaxEn9SpGchISXB28gOY6NmGcZTgrIiQdzKf5G PKpZ23VIKT6MtCimKSNLHIzq2aMlaIk2iXBKceqPGZ/MZeQL/CU1dWJUEL+mlnuf e1q3fAO1atiTDNdWR5fPxMibOpaH1VfvY29O8Tw6giaY69E2lMV5tTbK7K8a+kr/ S6rsXCsaJvYxtarW2V4dcRyN9ihFr4KMcq4o1Dpqrh+T2fZqcDA= =rwYl -----END PGP SIGNATURE----- Merge tag 'auxdisplay-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay Pull auxdisplay updates from Andy Shevchenko: - Refactor a couple of APIs to reduce amount of calls to memory allocator - Miscellaneous small fixes and improvements * tag 'auxdisplay-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: auxdisplay: hd44780: Rename hd to hdc in hd44780_common_alloc() auxdisplay: hd44780: Call charlcd_alloc() from hd44780_common_alloc() auxdisplay: panel: Make use of hd44780_common_free() auxdisplay: hd44780: Make use of hd44780_common_free() auxdisplay: hd44780: Introduce hd44780_common_free() auxdisplay: lcd2s: Allocate memory for custom data in charlcd_alloc() auxdisplay: charlcd: Partially revert "Move hwidth and bwidth to struct hd44780_common" auxdisplay: panel: Fix an API misuse in panel.c auxdisplay: hd44780: Fix an API misuse in hd44780.c auxdisplay: MAX6959 should select BITREVERSE auxdisplay: seg-led-gpio: use gpiod_multi_set_value_cansleep |
||
|
Linus Torvalds
|
b23d8a07ab |
chrome-platform: Updates for v6.15
* New
- Support ACPI match for Framework systems.
- Expose new sysfs for:
- PD mux status for each EC-managed Type-C port.
- EC feature of AP mode entry.
- Setting USB mode of EC Type-C.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZ+DHCxMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0djABANQJoI2yZt8w8k7mQ9qjkE3C5sZVY83Z
uali0vVU3SnVAP9i5TVJ/RlyerwqtEaqSKfSC5p5Y7uURxnQWQ1cnYu/BQ==
=lEz+
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
- Support ACPI match for Framework systems
- Expose new sysfs for:
- PD mux status for each EC-managed Type-C port
- EC feature of AP mode entry
- Setting USB mode of EC Type-C
* tag 'chrome-platform-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Add support for setting USB mode via sysfs
platform/chrome: cros_ec_sysfs: Expose AP_MODE_ENTRY feature state
platform/chrome: cros_ec_sysfs: Expose PD mux status
platform/chrome: cros_ec_lpc: Match on Framework ACPI device
MAINTAINERS: Update maintainers for ChromeOS USBC related drivers
|
||
|
Linus Torvalds
|
2a2274e90a |
pmdomain core:
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM pmdomain providers: - arm: Remove redundant state verification for the SCMI PM domain - bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP - rockchip: Add support for regulators - rockchip: Use SMC call to properly inform firmware - sunxi: Add V853 ppu support - thead: Add support for RISC-V TH1520 power-domains firmware: - Add support for the AON firmware protocol for RISC-V THEAD cpuidle-psci: - Update section in MAINTAINERS for cpuidle-psci - Add trace support for PSCI domain-idlestates -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmfimQ8XHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmp5A//QuqG0PiwrDyR/qOgOaYXHLe3 lYohfHtLyKVO0qAxhhiRbUZQrK4yitkRUJoXHcJuIqqXXjiM3tKu5Vp5loqVpqZi Q8nj6gEIUA1FQjY0h8VTS+NWXA5xbsqgayzw2U6BAfKHQwsvcMXn/hT5v8d0Q2WG UVNb+Xz25q6qzZPbhR/wfJ8kvFkGjV1GtIG3PPwA+C31jFjdcZhU+Rlwtgu+WDZE yofA/pkw5jdDkODTyysYhHKpZlnX+V1yUqs2xym27M2xmbCDpsn9IM45omuFCdnh 7dyKtG55XLd9wpAtO2DVvUWW0bhtr/zfDpWvDQdevQLjwrIdw5wdg53SE3NpNR7/ cCWLM7OFaTJDuuK/upuT75ZKaFqEu5QV9+Na5skQhL0Tl4V9A0nNRPLQXJItGZWv XNfV9OxljYK8c+5fEEEB+pBymZ2LeRvw2+P3DIMSgYNwdZMudmNRWsQe2SjbC4jI G9XzpXw6YaIUNmI8fGGZ4U4CqMg0bOjY7zlQL2VMTe3+JJGdpCRmONT8EV/LH3PQ 2V4dSjwoWH0lmQLo2trNDuIWj6AdGNObSL3LXSKPo6ORXg24dWdI9Dbc7PpPvOb0 CZ9AV3SezfmkSyODI5G5ULUeH1hy4h6jn9py2SoVRS3SQyznh0HZj9kBlyuVgfmL mArHaUCmVHPKhAvLc1g= =Wihe -----END PGP SIGNATURE----- Merge tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM pmdomain providers: - arm: Remove redundant state verification for the SCMI PM domain - bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP - rockchip: Add support for regulators - rockchip: Use SMC call to properly inform firmware - sunxi: Add V853 ppu support - thead: Add support for RISC-V TH1520 power-domains firmware: - Add support for the AON firmware protocol for RISC-V THEAD cpuidle-psci: - Update section in MAINTAINERS for cpuidle-psci - Add trace support for PSCI domain-idlestates" * tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (29 commits) firmware: thead: add CONFIG_MAILBOX dependency firmware: thead,th1520-aon: Fix use after free in th1520_aon_init() pmdomain: arm: scmi_pm_domain: Remove redundant state verification pmdomain: thead: fix TH1520_AON_PROTOCOL dependency pmdomain: thead: Add power-domain driver for TH1520 dt-bindings: power: Add TH1520 SoC power domains firmware: thead: Add AON firmware protocol driver dt-bindings: firmware: thead,th1520: Add support for firmware node pmdomain: rockchip: add regulator dependency pmdomain: rockchip: add regulator support pmdomain: rockchip: fix rockchip_pd_power error handling pmdomain: rockchip: reduce indentation in rockchip_pd_power pmdomain: rockchip: forward rockchip_do_pmu_set_power_domain errors pmdomain: rockchip: cleanup mutex handling in rockchip_pd_power dt-bindings: power: rockchip: add regulator support pmdomain: rockchip: Fix build error pmdomain: imx: gpcv2: use proper helper for property detection MAINTAINERS: Update section for cpuidle-psci pmdomain: rockchip: Check if SMC could be handled by TA cpuidle: psci: Add trace for PSCI domain idle ... |
||
|
Linus Torvalds
|
0163c8864b |
MMC host:
- atmel-mci: Convert DT bindings to json schema - dw_mmc: Add support for the Exynos7870 variant - dw_mmc-rockchip: Add support for the RK3562/3528 variants - omap: Fix potential memory leak in the probe error path - renesas_sdhi: Add support for RZ/G3E variants - sdhci: Disable SD card clock before changing parameters - sdhci-esdhc-imx: Add support for the i.MX94 variant - sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants - sdhci-omap: Disable aggressive PM for eMMC/SD-cards - sdhci-pci-core: Wait for VDD to settle on card power off - sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY - sunxi-mmc: Add support for the A523 variant MEMSTICK: - rtsx_usb_ms: Fix potential use-after-free during remove -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmfifpgXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCl/pxAAuvv6EAxxz/kt5iZJoxxBxp6V TCBYNOKxxgHaD/fyWERCi9ON4+W2fJoghVolNblBFAxrdl/VdEzHAyB8YOHsQcno chFccV8n0bhxWzl5O2UTRTszP+3Fa/AdiQb5FR8NoAoNuDXwn673gxJUWT24pRcm 8swMDQJiWLtJ5QskW+OWJXsdcuYa89FLOHgBnn+NVLTDUBqFgRuuVMhJA+td1rW4 Pv5EMeFw3+AcUlBlHXUlFjq08I92kcDxxBXRpIvUwC586aKyire/quVOX+CmQquK i27RdU+UjCzbJp0FLK9+4DEm6uRK3EzQxUtNx8qGmj6xqkTj5jOj3/lMV7oOepOR bLBrmdXsOCSzIHuAYQSrVi1sBClSmnRSBgLgrouUo3AP9h+IAWtD928LeVZxD82Q mmDGh9EwStodEyZMwqbT41lsj33BEeXAWThNsZW+savFisfAMKBgrk3H2l8Qn+71 MKUiA5OaXhTM8n6ihLIv26KCrdipBS31X1hIWWj7yJBNkNd0LIYnSzPyp126BFLT AwrR+CglTpEIc+0e8UMb9S8YgNgW3OCnYeF5BzVtyrZR7qNj96VaYyORTP+GkDhl S4+Jrsi+qjVoNDvgJ8htNkH0HyZj+qYJBNz7AIqdT4AW7TCCE4BVGQNWGPeUTTx6 lGQtJkfT4nG+G0XmXGQ= =a9PQ -----END PGP SIGNATURE----- Merge tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC host: - atmel-mci: Convert DT bindings to json schema - dw_mmc: Add support for the Exynos7870 variant - dw_mmc-rockchip: Add support for the RK3562/3528 variants - omap: Fix potential memory leak in the probe error path - renesas_sdhi: Add support for RZ/G3E variants - sdhci: Disable SD card clock before changing parameters - sdhci-esdhc-imx: Add support for the i.MX94 variant - sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants - sdhci-omap: Disable aggressive PM for eMMC/SD-cards - sdhci-pci-core: Wait for VDD to settle on card power off - sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY - sunxi-mmc: Add support for the A523 variant MEMSTICK: - rtsx_usb_ms: Fix potential use-after-free during remove" * tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits) mmc: core: Remove redundant null check mmc: host: Wait for Vdd to settle on card power off mmc: omap: Fix memory leak in mmc_omap_new_slot memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove mmc: renesas_sdhi: fix error code in renesas_sdhi_probe() mmc: sdhci-pxav3: set NEED_RSP_BUSY capability mmc: sdhci-omap: Disable MMC_CAP_AGGRESSIVE_PM for eMMC/SD tty: mmc: sdio: use bool for cts and remove parentheses dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523 dt-bindings: mmc: sunxi: Simplify compatible string listing dt-bindings: mmc: sdhci-of-dwcmhsc: Add compatible string for RK3528 dt-bindings: mmc: rockchip-dw-mshc: Add compatible string for RK3528 mmc: renesas_sdhi: Add support for RZ/G3E SoC dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support dt-bindings: mmc: rockchip-dw-mshc: Add support for rk3562 dt-bindings: mmc: Add support for rk3562 eMMC mmc: core: Trim trailing whitespace from card product names dt-bindings: mmc: atmel,hsmci: Convert to json schema dt-bindings: mmc: mmc-slot: Make compatible property optional dt-bindings: mmc: fsl-imx-esdhc: Add i.MX94 support ... |
||
|
Linus Torvalds
|
5143840cef |
gpio updates for v6.15-rc1
GPIO core:
- add sanitization of return values of GPIO provider callbacks so that invalid
ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers that return
an integer and allow to indicate driver errors to the GPIO core
- change the interface of all gpiod_set_value() variants to return an integer
thus becoming able to indicate failures in the underlying layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler interface to
gpiod_set_array_value_cansleep() and use it across several drivers treewide
- reduce the number of atomic reads of the descriptor flags in gpiolib debugfs
code
- simplify for_each_hwgpio_in_range() and for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE subsystem
disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't allow
drivers to set it as it should only be handled by GPIO core and start
actually enforcing it in GPIO core for *all* drivers, not only the ones
implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its device in
order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the new value
setter callbacks
- convert several drivers to using automatic lock guards from cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by() and bits.h
macros)
- refactor gpio-latch (use generic device properties, lock guards and some
local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO devices
into its own library
- use str_enable_disable(), str_high_low() and other string helpers where
applicable
- extend the gpio-mmio abstraction layer to allow calling into the pinctrl
back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list
-----BEGIN PGP SIGNATURE-----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=h7Hv
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are no new drivers this time but several changes to the core
GPIO framework and various driver updates.
This release cycle, we're starting a relatively straightforward but
tedious rework of the GPIO consumer API: for historical reasons, the
gpiod_set_value() variants would return void. Not only that but the
GPIO provider interface does not even allow drivers to return a value
to GPIO core. This is because initial GPIO controllers would be MMIO
based and could not fail. We've had I2C, SPI and USB controllers for
years too but no way of indicating failures to callers.
This changes the consumer interface, adds new provider callbacks and
starts converting the drivers under drivers/gpio/ to using them. Once
this gets upstream, we'll keep on converting GPIO drivers that live
elsewhere and once there are no more users of the old callbacks, we'll
remove them and rename the new ones to the previous name. I imagine
the last step would happen in one sweeping change like what you did
for the remove_new() -> remove() renaming.
We've also addressed an issue where invalid return values from GPIO
drivers would get propagated to user-space by adding some
GPIO-core-level sanitization. Again: not a complex change but way
overdue.
Other than that: lots of driver and core refactoring, DT-bindings
changes and some other minor changes like coding style fixes or header
reordering.
GPIO core:
- add sanitization of return values of GPIO provider callbacks so
that invalid ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers
that return an integer and allow to indicate driver errors to the
GPIO core
- change the interface of all gpiod_set_value() variants to return an
integer thus becoming able to indicate failures in the underlying
layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler
interface to gpiod_set_array_value_cansleep() and use it across
several drivers treewide
- reduce the number of atomic reads of the descriptor flags in
gpiolib debugfs code
- simplify for_each_hwgpio_in_range() and
for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE
subsystem disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't
allow drivers to set it as it should only be handled by GPIO core
and start actually enforcing it in GPIO core for *all* drivers, not
only the ones implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its
device in order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the
new value setter callbacks
- convert several drivers to using automatic lock guards from
cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by()
and bits.h macros)
- refactor gpio-latch (use generic device properties, lock guards and
some local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from
GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO
devices into its own library
- use str_enable_disable(), str_high_low() and other string helpers
where applicable
- extend the gpio-mmio abstraction layer to allow calling into the
pinctrl back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list"
* tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (119 commits)
gpio: TODO: add an item to track reworking the sysfs interface
gpio: TODO: add an item to track the conversion to the new value setters
gpio: TODO: add delimiters between tasks for better readability
gpio: TODO: remove the pinctrl integration task
gpio: TODO: remove task duplication
gpio: TODO: remove the item about the new debugfs interface
gpio: da9055: use new line value setter callbacks
gpio: da9052: use new line value setter callbacks
gpio: cs5535: use new line value setter callbacks
gpio: crystalcove: use new line value setter callbacks
gpio: cros-ec: use new line value setter callbacks
gpio: creg-snps: use new line value setter callbacks
gpio: cgbc: use new line value setter callbacks
gpio: bt8xx: use new line value setter callbacks
gpio: bt8xx: use lock guards
gpio: bt8xx: allow to build the module with COMPILE_TEST=y
gpio: bd9571mwv: use new line value setter callbacks
gpio: bd71828: use new line value setter callbacks
gpio: bd71815: use new line value setter callbacks
gpio: bcm-kona: use new line value setter callbacks
...
|
||
|
Linus Torvalds
|
c07666e29b |
hwmon updates for v6.15
- New drivers
* Driver for HTU31
* Congatec Board Controller monitoring driver
* Driver for TI INA233 Current and Power Monitor
- Support for additional chips or boards in existing drivers
* pmbus/ltc2978: Add support for LT717x and LTM4673
* asus-ec-sensors: Add PRIME X670E-PRO WIFI
* k10temp: Add support for cyan skillfish
* nct6683: Add customer ID for AMD BC-250
* lm90: Add support for NCT7716, NCT7717 and NCT7718
- Other notable improvements in existing drivers
* emc2305: Add devicetree support, and use
devm_thermal_of_cooling_device_register
* acpi_power_meter: Convert to with_info API
* dell-smm: Increase the number of fans
* pmbus/core: Optimize debugfs support and use i2c_client debugfs
directory
* hwmon core: Fix the missing of 'average' word in
hwmon_power_attr_templates
* Various drivers: Use per-client debugfs entry provided by I2C
subsystem
-----BEGIN PGP SIGNATURE-----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=6HFa
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for HTU31
- Congatec Board Controller monitoring driver
- Driver for TI INA233 Current and Power Monitor
Support for additional chips or boards in existing drivers:
- pmbus/ltc2978: Add support for LT717x and LTM4673
- asus-ec-sensors: Add PRIME X670E-PRO WIFI
- k10temp: Add support for cyan skillfish
- nct6683: Add customer ID for AMD BC-250
- lm90: Add support for NCT7716, NCT7717 and NCT7718
Other notable improvements in existing drivers:
- emc2305: Add devicetree support, and use
devm_thermal_of_cooling_device_register
- acpi_power_meter: Convert to with_info API
- dell-smm: Increase the number of fans
- pmbus/core: Optimize debugfs support and use i2c_client
debugfs directory
- hwmon core: Fix the missing of 'average' word in
hwmon_power_attr_templates
- Various drivers: Use per-client debugfs entry provided by
I2C subsystem"
* tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
hwmon: emc2305: Use devm_thermal_of_cooling_device_register
hwmon: emc2305: Add OF support
dt-bindings: hwmon: Add Microchip emc2305 support
dt-bindings: hwmon: Drop stray blank line in the header
hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register
hwmon: add driver for HTU31
dt-bindings: hwmon: Add description for sensor HTU31
hwmon: Add driver for TI INA233 Current and Power Monitor
dt-bindings: hwmon: ti,ina2xx: Add INA233 device
hwmon: Add Congatec Board Controller monitoring driver
hwmon: (pmbus/ltc2978) add support for lt717x
dt-bindings: hwmon: ltc2978: add support for LT717x
hwmon: (pmbus/ltc2978) Add support for LT717x - docs
hwmon: (dell-smm) Increment the number of fans
hwmon: (ntc_thermistor) return error instead of clipping on OOB
hwmon: (pt5161l) Use per-client debugfs entry
hwmon: Fix the missing of 'average' word in hwmon_power_attr_templates
hwmon: (acpi_power_meter) Fix the fake power alarm reporting
hwmon: (gpio-fan) Add missing mutex locks
dt-bindings: hwmon: gpio-fan: Add optional regulator support
...
|
||
|
Linus Torvalds
|
5e0c2cc4c3 |
pwm: Changes for v6.15-rc1
Here comes the usual mix of cleanups, new dt-bindings for existing drivers and nexus nodes; and a new driver for the pwm subsystem. Patches were contributed by Andy Shevchenko, Chen Wang, Chukun Pan, Frank Li, Herve Codina, Kever Yang, and Nam Cao. Patch feedback was provided by Andy Shevchenko, Conor Dooley, Daniel Mack, Duje Mihanović, Heiko Stuebner, Herve Codina, Krzysztof Kozlowski, Neil Armstrong, Rob Herring, and Zack Rusin. Thanks to all of them. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmfhj+sACgkQj4D7WH0S /k5WgwgAq7EBr02O5Pkq/KykkA49oMPxWrwB626B75a/wzb/UUCrwMhYa66sgjmc NZkjXhick5o7RrJJIU6cV7qR3v91CeWgwQmosELt8Kd6nHTfldIm+92E0zmiWnK8 1teTw9WklPnQI/y67K5/xBLkz9f5zLRXScVebR+sINRsaAfbvF5dnvfftrDfzrB7 +Lvavl2AfXu//fExlSo/4a5NTwxP/5rdqIOhgSaQc4yF+lZH2EjvOnbQjMh7gB1q 1+RiUkbsfhHakTd1g9kzezSGZxYhYvcKJw+kD+0+1S34aK+s1hKkqffWRWDsAQhT ZAxj8Cn+nQpROMpE31EiWV1VTWIs2A== =9ySz -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "Here comes the usual mix of cleanups, new dt-bindings for existing drivers and nexus nodes; and a new driver for the pwm subsystem. Patches were contributed by Andy Shevchenko, Chen Wang, Chukun Pan, Frank Li, Herve Codina, Kever Yang, and Nam Cao. Patch feedback was provided by Andy Shevchenko, Conor Dooley, Daniel Mack, Duje Mihanović, Heiko Stuebner, Herve Codina, Krzysztof Kozlowski, Neil Armstrong, Rob Herring, and Zack Rusin. Thanks to all of them" * tag 'pwm/for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: dt-bindings: pwm: imx: Add i.MX93, i.MX94 and i.MX95 support dt-bindings: pwm: rockchip: Add rockchip,rk3528-pwm pwm: stmpe: Allow to compile as a module pwm: Check for CONFIG_PWM using IS_REACHABLE() in main header dt-bindings: pwm: rockchip: Add rockchip,rk3562-pwm pwm: Strengthen dependency for PWM_SIFIVE pwm: clps711x: Drop of_match_ptr() usage for .of_match_table pwm: pca9685: Drop ACPI_PTR() and of_match_ptr() pwm: Add support for pwm nexus dt bindings dt-bindings: pwm: Add support for PWM nexus node pwm: Add upgrade path to #pwm-cells = <3> for users of of_pwm_single_xlate() pwm: gpio: Switch to use hrtimer_setup() pwm: sophgo: add driver for Sophgo SG2042 PWM dt-bindings: pwm: sophgo: add PWM controller for SG2042 pwm: lpss: Only include <linux/pwm.h> where needed |
||
|
Linus Torvalds
|
47618bc875 |
spi: Updates for v6.15
The biggest change for SPI this release is the addition of offload
support from David Lechner, allowing the hardware to trigger SPI
transactions autonomously. The initial use case is for triggering IIO
operations but there are other applications where having the hardware
ready to go at a minimal signal is useful for synchronising with
external inputs (eg, interrupt handling) or reducing latency (eg, CAN
networking). Otherwise there's the usual fixes, improvements and
cleanups, plus support for a bunch of new devices.
- Support for offloaing support from David Lechner.
- Support for GOcontrol1 Moduline modules, Mediatek MT7988, NXP i.MX94,
Qualcomm SPI NAMD, Rockchip RK3562, Sophogo SG2044 and ST STM32 OSPI.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmfhbQgACgkQJNaLcl1U
h9DQrAf6A30I4GJGwD4qWwCdsChxr0of8r3q0zIAcC53UaMqLBTdwnQT+wD4MTe8
vnUY54Z8PYoDKaPx54YxmWh0zB4OQgxvtcJyaZ9biLWtPy3kZdhHlC5xrVQbzLc5
ki/AW2Fsl2GQ1+5mtI3yP6awQ5HQ17gXS1q+nl2/D1njv2sI1Z1998nBkmsaNwNb
SPmaDV5UIQkO9wENnJCbX7bRlM+FgkgYo10JFffmWCnntsaZ01NlUC+BBg9y9xAy
padE2ucWWDqdmiHOC1z7kJU5MFGZWGSSVATLZZz3GL+vw/Oan/Mb5K2zoZh0IcD9
QPJxNnokYtYFR/IlH/obL0EMutaoSQ==
=vqZa
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The biggest change for SPI this release is the addition of offload
support from David Lechner, allowing the hardware to trigger SPI
transactions autonomously. The initial use case is for triggering IIO
operations but there are other applications where having the hardware
ready to go at a minimal signal is useful for synchronising with
external inputs (eg, interrupt handling) or reducing latency (eg, CAN
networking).
Otherwise there's the usual fixes, improvements and cleanups, plus
support for a bunch of new devices.
- Support for offloading support from David Lechner
- Support for GOcontrol1 Moduline modules, Mediatek MT7988, NXP
i.MX94, Qualcomm SPI NAMD, Rockchip RK3562, Sophogo SG2044 and ST
STM32 OSPI"
* tag 'spi-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
spi: spi-mem: Introduce a default ->exec_op() debug log
spi: dt-bindings: cdns,qspi-nor: Require some peripheral properties
spi: dt-bindings: cdns,qspi-nor: Deprecate the Cadence compatible alone
spi: dt-bindings: cdns,qspi-nor: Be more descriptive regarding what this controller is
spi: stm32-ospi: Include "gpio/consumer.h"
MAINTAINERS: adjust the file entry in GOCONTROLL MODULINE MODULE SLOT
spi: spi-qpic-snand: avoid memleak in qcom_spi_ecc_init_ctx_pipelined()
spi: spi-mux: Fix coverity issue, unchecked return value
spi: sophgo: fix incorrect type for ret in sg2044_spifmc_write()
spi: sg2044-nor: fix uninitialized variable in probe
spi: sg2044-nor: fix signedness bug in sg2044_spifmc_write()
spi: sg2044-nor: Convert to dev_err_probe()
spi: sg2044-nor: Fully convert to device managed resources
dt-bindings: spi: add compatibles for mt7988
spi: spidev: Add an entry for the gocontroll moduline module slot
MAINTAINERS: add maintainer for the GOcontroll Moduline module slot
dt-bindings: connector: Add the GOcontroll Moduline module slot bindings
dt-bindings: vendor-prefixes: add GOcontroll
spi: Use inclusive language
spi: cadence-qspi: Improve spi memory performance
...
|
||
|
Linus Torvalds
|
e2ae6e14d7 |
regulator: Updates for v6.15
This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling:
- A rework of the handling of LDO5 on the PCA9450, this was quite wrong
in how it handled the SD_VSEL conrol and only worked for some system
designs. This includes a DTS update since there was a not quite ABI
compatible change as part of the fix.
- A devres change introducing devm_kmemdup_array() was pulled in so it
could be used with some regulator conversions to that function, this
pulled in some other devres and IIO stuff that was part of the same pull
request.
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed.
- Support for the NXP PF9453.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmfhaNUACgkQJNaLcl1U
h9C3lAf8C6tohTvyzPWCcqQN5RnoZSw1SNN9jloEL1xcMKEtRosTaqIYRDKhuKUL
Drumh8C1B9Kx2wrsvE+j1eX4gXCaPK9P7EZbH3h3WFXkFkov6MNsH+UmhOAVm3AT
U/JmYs6/iGng/OptlYsguahwgwyj2eLb8E5RzSg7KgKbNW47M7QcqpkarQpRB+Si
Fz5528UQwDPwD04R4SEIn85I1xnJWdFVyOdfQA32Ugh7l8Vhgf+Z7G1aH4/5hOz8
cYJKoZscgOIkJw4lsKbS/+dCo2haYJqKCcT68P8qGf8zr9yeLPzkLYqNf+NaW/wP
uhoJKDm0nqo/rC9T1810YQfbPrfg6w==
=oFD5
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling.
- A rework of the handling of LDO5 on the PCA9450, this was quite
wrong in how it handled the SD_VSEL conrol and only worked for some
system designs. This includes a DTS update since there was a not
quite ABI compatible change as part of the fix
- A devres change introducing devm_kmemdup_array() was pulled in so
it could be used with some regulator conversions to that function,
this pulled in some other devres and IIO stuff that was part of the
same pull request
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed
- Support for the NXP PF9453"
* tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: axp20x: AXP717: dcdc4 doesn't have delay
regulator: dt-bindings: rtq2208: Cleanup whitespace
regulator: dt-bindings: rtq2208: Mark fixed LDO VOUT property as deprecated
regulator: rtq6752: make const read-only array fault_mask static
regulator: pf9453: add PMIC PF9453 support
regulator: dt-bindings: pca9450: Add nxp,pf9453 compatible string
regulator: pcf50633-regulator: Remove
regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5
regulator: cros-ec: use devm_kmemdup_array()
regulator: devres: use devm_kmemdup_array()
regulator: Add (devm_)of_regulator_get()
devres: Introduce devm_kmemdup_array()
iio: imu: st_lsm9ds0: Replace device.h with what is needed
driver core: Split devres APIs to device/devres.h
err.h: move IOMEM_ERR_PTR() to err.h
regulator: pca9450: Remove duplicate code in probe
regulator: ad5398: Fix incorrect power down bit mask
regulator: pca9450: Fix enable register for LDO5
regulator: pca9450: Fix control register for LDO5
Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
...
|
||
|
Linus Torvalds
|
ee6740fd34 |
CRC updates for 6.15
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
|
||
|
Linus Torvalds
|
a86c6d0b2a |
fscrypt updates for 6.15
A fix for an issue where CONFIG_FS_ENCRYPTION could be enabled without some of its dependencies, and a small documentation update. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CBShQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKxj0AQC4OlE/HbIY2w3zO8Az9WEF9+4Dz9od EpxTwO/fk9PC+gD/Z7r8J3xn+ykcy9QcZW+Qucd64k+rbmvqj36gXce6hAI= =r+lX -----END PGP SIGNATURE----- Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux Pull fscrypt updates from Eric Biggers: "A fix for an issue where CONFIG_FS_ENCRYPTION could be enabled without some of its dependencies, and a small documentation update" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: mention init_on_free instead of page poisoning fscrypt: drop obsolete recommendation to enable optimized ChaCha20 Revert "fscrypt: relax Kconfig dependencies for crypto API algorithms" |