Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases.
Link: https://lkml.kernel.org/r/20260217050955.138351-1-phillip@squashfs.org.uk
Fixes: f400e12656 ("Squashfs: cache operations")
Reported-by: syzbot+a9747fe1c35a5b115d3f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/699234e2.a70a0220.2c38d7.00e2.GAE@google.com/
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LUO keeps track of successful retrieve attempts on a LUO file. It does so
to avoid multiple retrievals of the same file. Multiple retrievals cause
problems because once the file is retrieved, the serialized data
structures are likely freed and the file is likely in a very different
state from what the code expects.
The retrieve boolean in struct luo_file keeps track of this, and is passed
to the finish callback so it knows what work was already done and what it
has left to do.
All this works well when retrieve succeeds. When it fails,
luo_retrieve_file() returns the error immediately, without ever storing
anywhere that a retrieve was attempted or what its error code was. This
results in an errored LIVEUPDATE_SESSION_RETRIEVE_FD ioctl to userspace,
but nothing prevents it from trying this again.
The retry is problematic for much of the same reasons listed above. The
file is likely in a very different state than what the retrieve logic
normally expects, and it might even have freed some serialization data
structures. Attempting to access them or free them again is going to
break things.
For example, if memfd managed to restore 8 of its 10 folios, but fails on
the 9th, a subsequent retrieve attempt will try to call
kho_restore_folio() on the first folio again, and that will fail with a
warning since it is an invalid operation.
Apart from the retry, finish() also breaks. Since on failure the
retrieved bool in luo_file is never touched, the finish() call on session
close will tell the file handler that retrieve was never attempted, and it
will try to access or free the data structures that might not exist, much
in the same way as the retry attempt.
There is no sane way of attempting the retrieve again. Remember the error
retrieve returned and directly return it on a retry. Also pass this
status code to finish() so it can make the right decision on the work it
needs to do.
This is done by changing the bool to an integer. A value of 0 means
retrieve was never attempted, a positive value means it succeeded, and a
negative value means it failed and the error code is the value.
Link: https://lkml.kernel.org/r/20260216132221.987987-1-pratyush@kernel.org
Fixes: 7c722a7f44 ("liveupdate: luo_file: implement file systems callbacks")
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
file_thp_enabled() incorrectly allows THP for files on anonymous inodes
(e.g. guest_memfd and secretmem). These files are created via
alloc_file_pseudo(), which does not call get_write_access() and leaves
inode->i_writecount at 0. Combined with S_ISREG(inode->i_mode) being
true, they appear as read-only regular files when
CONFIG_READ_ONLY_THP_FOR_FS is enabled, making them eligible for THP
collapse.
Anonymous inodes can never pass the inode_is_open_for_write() check
since their i_writecount is never incremented through the normal VFS
open path. The right thing to do is to exclude them from THP eligibility
altogether, since CONFIG_READ_ONLY_THP_FOR_FS was designed for real
filesystem files (e.g. shared libraries), not for pseudo-filesystem
inodes.
For guest_memfd, this allows khugepaged and MADV_COLLAPSE to create
large folios in the page cache via the collapse path, but the
guest_memfd fault handler does not support large folios. This triggers
WARN_ON_ONCE(folio_test_large(folio)) in kvm_gmem_fault_user_mapping().
For secretmem, collapse_file() tries to copy page contents through the
direct map, but secretmem pages are removed from the direct map. This
can result in a kernel crash:
BUG: unable to handle page fault for address: ffff88810284d000
RIP: 0010:memcpy_orig+0x16/0x130
Call Trace:
collapse_file
hpage_collapse_scan_file
madvise_collapse
Secretmem is not affected by the crash on upstream as the memory failure
recovery handles the failed copy gracefully, but it still triggers
confusing false memory failure reports:
Memory failure: 0x106d96f: recovery action for clean unevictable
LRU page: Recovered
Check IS_ANON_FILE(inode) in file_thp_enabled() to deny THP for all
anonymous inode files.
Link: https://syzkaller.appspot.com/bug?extid=33a04338019ac7e43a44
Link: https://lore.kernel.org/linux-mm/CAEvNRgHegcz3ro35ixkDw39ES8=U6rs6S7iP0gkR9enr7HoGtA@mail.gmail.com
Link: https://lkml.kernel.org/r/20260214001535.435626-1-kartikey406@gmail.com
Fixes: 7fbb5e1882 ("mm: remove VM_EXEC requirement for THP eligibility")
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Reported-by: syzbot+33a04338019ac7e43a44@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=33a04338019ac7e43a44
Tested-by: syzbot+33a04338019ac7e43a44@syzkaller.appspotmail.com
Tested-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Fangrui Song <i@maskray.me>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In a few rare configurations with extra warnings eanbled, the new
drm_pagemap_migrate_populate_ram_pfn() calls vma_alloc_folio_noprof() but
that does not use all the arguments, leading to a harmless warning:
drivers/gpu/drm/drm_pagemap.c: In function 'drm_pagemap_migrate_populate_ram_pfn':
drivers/gpu/drm/drm_pagemap.c:701:63: error: parameter 'addr' set but not used [-Werror=unused-but-set-parameter=]
701 | unsigned long addr)
| ~~~~~~~~~~~~~~^~~~
Replace the macro with an inline function so the compiler can see how the
argument would be used, but is still able to optimize out the assignments.
Link: https://lkml.kernel.org/r/20260216121751.2378374-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KFENCE does not currently support KASAN hardware tags. As a result, the
two features are incompatible when enabled simultaneously.
Given that MTE provides deterministic protection and KFENCE is a
sampling-based debugging tool, prioritize the stronger hardware
protections. Disable KFENCE initialization and free the pre-allocated
pool if KASAN hardware tags are detected to ensure the system maintains
the security guarantees provided by MTE.
Link: https://lkml.kernel.org/r/20260213095410.1862978-1-glider@google.com
Fixes: 0ce20dd840 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ernesto Martinez Garcia <ernesto.martinezgarcia@tugraz.at>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Any SQE read should use READ_ONCE(), to ensure the result is read once
and only once. Doesn't really matter for this case, but it's better to
keep these 100% consistent and always use READ_ONCE() for the prep side
of SQE handling.
Fixes: 5d24321e4c ("io_uring: Introduce getsockname io_uring cmd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The devm_of_iomap() function returns an ERR_PTR() encoded error code on
failure. Replace the incorrect check against NULL with IS_ERR().
Fixes: 05cd654829 ("irqchip/ls-extirq: Convert to a platform driver to make it work again")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20260224113610.1129022-3-ioana.ciornei@nxp.com
Closes: https://lore.kernel.org/all/aYXvfbfT6w0TMsXS@stanley.mountain/
This reverts commit 3ac6dfe3d7.
The ls-extirq uses interrupt-map but it's a non-standard use documented
in fsl,ls-extirq.yaml:
# The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
# function to parser interrupt-map. So it doesn't consider '#address-size'
# in parent interrupt controller, such as GIC.
#
# When dt-binding verify interrupt-map, item data matrix is spitted at
# incorrect position. Remove interrupt-map restriction because it always
# wrong.
This means that by using for_each_of_imap_item and the underlying
of_irq_parse_imap_parent() on its interrupt-map property will effectively
break its functionality
Revert the patch making use of for_each_of_imap_item() in ls-extirq.
Fixes: 3ac6dfe3d7 ("irqchip/ls-extirq: Use for_each_of_imap_item iterator")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20260224113610.1129022-2-ioana.ciornei@nxp.com
In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns
without calling of_node_put(child), causing the device node reference
leak.
Fixes: 981dd162b6 ("regulator: bq257xx: Add bq257xx boost regulator driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260224-bq257-v1-1-8ebbc731c1c3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In fp9931_hwmon_read(), if regmap_read() failed, the function returned
the error code without calling pm_runtime_put_autosuspend(), causing
a PM reference leak.
Fixes: 12d821bd13 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260224-fp9931-v1-1-1cf05cabef4a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel-doc for drm_gpusvm_pages_valid_unlocked() was stale and still
referenced old range-based arguments and naming. Update the documentation
to match the current function arguments and signature.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260219205029.1011336-1-matthew.brost@intel.com
Move the link recovery trigger from ufshcd_uic_pwr_ctrl() to
__ufshcd_wl_resume(). Ensure link recovery is only attempted when hibern8
exit fails during resume, not during hibern8 enter in suspend. Improve
error handling and prevent unnecessary link recovery attempts.
Fixes: 35dabf4503 ("scsi: ufs: core: Use link recovery when h8 exit fails during runtime resume")
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223103906.2533654-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The bpftool_maps_access and bpftool_metadata tests may fail on BPF CI
with "command not found", depending on a workflow.
This happens because detect_bpftool_path() only checks two hardcoded
relative paths:
- ./tools/sbin/bpftool
- ../tools/sbin/bpftool
Add support for a BPFTOOL environment variable that allows specifying
the exact path to the bpftool binary.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223191118.655185-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- kmem_cache_iter: remove unnecessary debug output
- lwt_seg6local: change the type of foobar to char[]
- the sizeof(foobar) returned the pointer size and not a string
length as intended
- verifier_log: increase prog_name buffer size in verif_log_subtest()
- compiler has a conservative estimate of fixed_log_sz value, making
ASAN complain on snprint() call
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223191118.655185-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compiler cannot infer upper bound for labels.cnt and warns about
potential buffer overflow in snprintf. Add an explicit bounds
check (... && i < MAX_LOCAL_LABELS) in the loop condition to fix the
warning.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-18-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ASAN reported a resource leak due to the bpf_object not being tracked
in test_sysctl. Add obj field to struct sysctl_test to properly clean
it up.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-17-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ASAN reported a "joining already joined thread" error. The
release_child() may be called multiple times for the same struct
child.
Fix by resetting child->thread to 0 after pthread_join.
Also memset(0) static child variable in test_attach_api().
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-15-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ASAN reported a use-after-free in close_xsk().
The xsk->socket internally references xsk->umem via socket->ctx->umem,
so the socket must be deleted before the umem. Fix the order of
operations in close_xsk().
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-14-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The Close() macro uses the passed in expression three times, which
leads to repeated execution in case it has side effects. That is,
Close(i--) would decrement i three times.
ASAN caught a stack-buffer-undeflow error at a point where this was
overlooked. Fix it.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-12-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ASAN reported a memory leak in bpf_get_ksyms(): it allocates a struct
ksyms internally and never frees it.
Move struct ksyms to trace_helpers.h and return it from the
bpf_get_ksyms(), giving ownership to the caller. Add filtered_syms and
filtered_cnt fields to the ksyms to hold the filtered array of
symbols, previously returned by bpf_get_ksyms().
Fixup the call sites: kprobe_multi_test and bench_trigger.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260223190736.649171-10-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a denylist file for tests that should be skipped when built with
userspace ASAN:
$ make ... SAN_CFLAGS="-fsanitize=address -fno-omit-frame-pointer"
Skip the following tests:
- *arena*: userspace ASAN does not understand BPF arena maps and gets
confused particularly when map_extra is non-zero
- non-zero map_extra leads to mmap with MAP_FIXED, and ASAN treats
this as an unknown memory region
- task_local_data: ASAN complains about "incorrect" aligned_alloc()
usage, but it's intentional in the test
- uprobe_multi_test: very slow with ASAN enabled
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-9-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Running resolve_btfids with ASAN reveals memory leaks in btf_id
handling.
- Change get_id() to use a local buffer
- Make btf_id__add() strdup the name internally
- Add btf_id__free_all() that frees all nodese of a tree
- Call the cleanup function on exit for every tree
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-8-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
EXTRA_* and SAN_* build flags were not correctly propagated to bpftool
and resolve_btids when building selftests/bpf. This led to various
build errors on attempt to build with SAN_CFLAGS="-fsanitize=address",
for example.
Fix the makefiles to address this:
- Pass SAN_CFLAGS/SAN_LDFLAGS to bpftool and resolve_btfids build
- Propagate EXTRA_LDFLAGS to resolve_btfids link command
- Use pkg-config to detect zlib and zstd for resolve_btfids, similar
libelf handling
Also check for ASAN flag in selftests/bpf/Makefile for convenience.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-7-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace strncpy() with memcpy() in cases where the source is
non-NULL-terminated and the copy length is known.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-6-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The CXL decoder flags are defined as bitmasks, not bit indices.
Using test_bit() to check them interprets the mask value as a bit
index, which is the wrong test.
For CXL_DECODER_F_NORMALIZED_ADDRESSING the test reads beyond the
flags word, making the flag sometimes appear set and blocking creation
of CXL region debugfs attributes that support poison operations.
Replace test_bit() with a bitmask check.
Found with cxl-test.
Fixes: 208f432406 ("cxl: Disable HPA/SPA translation handlers for Normalized Addressing")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Tested-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/63fe4a6203e40e404347f1cdc7a1c55cb4959b86.1771873256.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The CXL decoder flags are defined as bitmasks, not bit indices.
Using test_bit() to check them interprets the mask value as a bit
index, which is the wrong test.
For CXL_DECODER_F_LOCK the test reads beyond the defined bits, causing
the test to always return false and allowing resets that should have
been blocked.
Replace test_bit() with a bitmask check.
Fixes: 2230c4bdc4 ("cxl: Add handling of locked CXL decoder")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Tested-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/98851c4770e4631753cf9f75b58a3a6daeca2ea2.1771873256.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Found issue during running of cxl-translate.sh unit test. Adding a 3s
sleep right before the test seems to make the issue reproduce fairly
consistently. The cxl_translate module has dependency on cxl_acpi and
causes orphaned nvdimm objects to reprobe after cxl_acpi is removed.
The nvdimm_bus object is registered by the cxl_nvb object when
cxl_acpi_probe() is called. With the nvdimm_bus object missing,
__nd_device_register() will trigger NULL pointer dereference when
accessing the dev->parent that points to &nvdimm_bus->dev.
[ 192.884510] BUG: kernel NULL pointer dereference, address: 000000000000006c
[ 192.895383] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20250812-19.fc42 08/12/2025
[ 192.897721] Workqueue: cxl_port cxl_bus_rescan_queue [cxl_core]
[ 192.899459] RIP: 0010:kobject_get+0xc/0x90
[ 192.924871] Call Trace:
[ 192.925959] <TASK>
[ 192.926976] ? pm_runtime_init+0xb9/0xe0
[ 192.929712] __nd_device_register.part.0+0x4d/0xc0 [libnvdimm]
[ 192.933314] __nvdimm_create+0x206/0x290 [libnvdimm]
[ 192.936662] cxl_nvdimm_probe+0x119/0x1d0 [cxl_pmem]
[ 192.940245] cxl_bus_probe+0x1a/0x60 [cxl_core]
[ 192.943349] really_probe+0xde/0x380
This patch also relies on the previous change where
devm_cxl_add_nvdimm_bridge() is called from drivers/cxl/pmem.c instead
of drivers/cxl/core.c to ensure the dependency of cxl_acpi on cxl_pmem.
1. Set probe_type of cxl_nvb to PROBE_FORCE_SYNCHRONOUS to ensure the
driver is probed synchronously when add_device() is called.
2. Add a check in __devm_cxl_add_nvdimm_bridge() to ensure that the
cxl_nvb driver is attached during cxl_acpi_probe().
3. Take the cxl_root uport_dev lock and the cxl_nvb->dev lock in
devm_cxl_add_nvdimm() before checking nvdimm_bus is valid.
4. Set cxl_nvdimm flag to CXL_NVD_F_INVALIDATED so cxl_nvdimm_probe()
will exit with -EBUSY.
The removal of cxl_nvdimm devices should prevent any orphaned devices
from probing once the nvdimm_bus is gone.
[ dj: Fixed 0-day reported kdoc issue. ]
[ dj: Fix cxl_nvb reference leak on error. Gregory (kreview-0811365) ]
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Fixes: 8fdcb1704f ("cxl/pmem: Add initial infrastructure for pmem support")
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com?>
Link: https://patch.msgid.link/20260205001633.1813643-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
As stated in the da0a672268 ("spi: dw: Remove not-going-to-be-supported
code for Baikal SoC") the Baikal platforms are not supported and
the respective driver code was removed. Remove the currently unused bindings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260224115218.3499222-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The screen backlight turns off during boot (specifically during udev device
initialization) when returning true for _OSI("Windows 2009").
Analyzing the device's DSDT reveals that the firmware takes a different
code path when Windows 7 is reported, which leads to the backlight shutoff.
Add a DMI quirk to invoke dmi_disable_osi_win7 for this model.
Signed-off-by: Sofia Schneider <sofia@schn.dev>
Link: https://patch.msgid.link/20260223025240.518509-1-sofia@schn.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The update_cpu_qos_request() function attempts to initialize the 'freq'
variable by dereferencing 'cpudata' before verifying if the 'policy'
is valid.
This issue occurs on systems booted with the "nosmt" parameter, where
all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result,
any call to update_qos_requests() will result in a NULL pointer
dereference as the code will attempt to access pstate.turbo_freq using
the NULL cpudata pointer.
Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap()
after initializing the 'freq' variable, so it is better to defer the
'freq' until intel_pstate_get_hwp_cap() has been called.
Fix this by deferring the 'freq' assignment until after the policy and
driver_data have been validated.
Fixes: ae1bdd23b9 ("cpufreq: intel_pstate: Adjust frequency percentage computations")
Reported-by: Jirka Hladky <jhladky@redhat.com>
Closes: https://lore.kernel.org/all/CAE4VaGDfiPvz3AzrwrwM4kWB3SCkMci25nPO8W1JmTBd=xHzZg@mail.gmail.com/
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: 6.18+ <stable@vger.kernel.org> # 6.18+
[ rjw: Added one paragraph to the changelog ]
Link: https://patch.msgid.link/20260224122106.228116-1-darcari@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- purge error queues in socket destructors
- hci_sync: Fix CIS host feature condition
- L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
- L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
- L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
- L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
- L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
- hci_qca: Cleanup on all setup failures
-----BEGIN PGP SIGNATURE-----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=JBaa
-----END PGP SIGNATURE-----
Merge tag 'for-net-2026-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- purge error queues in socket destructors
- hci_sync: Fix CIS host feature condition
- L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
- L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
- L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
- L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
- L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
- hci_qca: Cleanup on all setup failures
* tag 'for-net-2026-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
Bluetooth: L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
Bluetooth: Fix CIS host feature condition
Bluetooth: L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
Bluetooth: hci_qca: Cleanup on all setup failures
Bluetooth: purge error queues in socket destructors
Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
====================
Link: https://patch.msgid.link/20260223211634.3800315-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Due to additional responsibilities, Shyam Sundar S K will no longer be
supporting the AMD XGBE driver. Maintenance will be handled by
Raju Rangoju going forward.
Cc: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260223074020.1987884-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
imx_clk_scu_init() registers the imx_clk_scu_driver while commonly being
called from IMX driver's probe() callbacks.
However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.
The latter was revealed by commit dc23806a7c ("driver core: enforce
device_lock for driver_match_device()") leading to a deadlock condition
described in [1].
Besides that, nothing seems to unregister the imx_clk_scu_driver once
the corresponding driver module is unloaded, which leaves the
driver-core with a dangling pointer.
Also, if there are multiple matching devices for the imx8qxp_clk_driver,
imx8qxp_clk_probe() calls imx_clk_scu_init() multiple times. However,
any subsequent call after the first one will fail, since the driver-core
does not allow to register the same struct platform_driver multiple
times.
Hence, register the imx_clk_scu_driver from module_init() and unregister
it in module_exit().
Note that we first register the imx8qxp_clk_driver and then call
imx_clk_scu_module_init() to avoid having to call
imx_clk_scu_module_exit() in the unwind path of imx8qxp_clk_init().
Fixes: dc23806a7c ("driver core: enforce device_lock for driver_match_device()")
Fixes: 220175cd39 ("clk: imx: scu: fix build break when compiled as modules")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/lkml/13955113.uLZWGnKmhe@steina-w/
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8x/MBa8x
Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1]
Acked-by: Abel Vesa <abelvesa@kernel.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260212235842.85934-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and
LED_TRIGGER_PHY are enabled:
[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);
[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234
[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c
[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c
[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0
[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0
[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c
[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78
[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();
[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0
[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c
[ 1362.104022] [<80014504>] syscall_common+0x34/0x58
Here LED_TRIGGER_PHY is registering LED triggers during phy_attach
while holding RTNL and then taking triggers_list_lock.
[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();
[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4
[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);
[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c
[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc
[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c
[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4
[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c
[ 1362.232164] [<80014504>] syscall_common+0x34/0x58
Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes
triggers_list_lock and then RTNL. A classical AB-BA deadlock.
phy_led_triggers_registers() does not require the RTNL, it does not
make any calls into the network stack which require protection. There
is also no requirement the PHY has been attached to a MAC, the
triggers only make use of phydev state. This allows the call to
phy_led_triggers_registers() to be placed elsewhere. PHY probe() and
release() don't hold RTNL, so solving the AB-BA deadlock.
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Closes: https://lore.kernel.org/all/OS7PR01MB13602B128BA1AD3FA38B6D1FFBC69A@OS7PR01MB13602.jpnprd01.prod.outlook.com/
Fixes: 06f502f57d ("leds: trigger: Introduce a NETDEV trigger")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://patch.msgid.link/20260222152601.1978655-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The break would only break out of the scoped_guard() loop, not the
switch statement. It still works correct as is ofc but let's avoid the
confusion.
Reported-by: David Lechner <dlechner@baylibre.com>
Link:: https://lore.kernel.org/cd2153f1-098b-463c-bbc1-5c6ca9ef1f12@baylibre.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
pegasus_probe() fills URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_rcvbulkpipe(dev, 1) for RX data
- usb_sndbulkpipe(dev, 2) for TX data
- usb_rcvintpipe(dev, 3) for status interrupts
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a pegasus_usb_ep enum for endpoint numbers, replacing magic
constants throughout. Add usb_check_bulk_endpoints() and
usb_check_int_endpoints() calls before any resource allocation to
verify endpoint types before use, rejecting devices with mismatched
descriptors at probe time, and avoid triggering assertion.
Similar fix to
- commit 90b7f29617 ("net: usb: rtl8150: enable basic endpoint checking")
- commit 9e7021d2ae ("net: usb: catc: enable basic endpoint checking")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260222050633.410165-1-n7l8m4@u.northwestern.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Many #ifdefs can be replaced with IS_ENABLED() to improve code
readability. No functional changes.
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de
Fixes: b245be1f4d ("net-timestamp: no-payload only sysctl")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260220183858.N4ERjFW6@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
