The cited commit introduced MLX5_PRIV_FLAGS_SWITCH_LEGACY to identify
when a transition to legacy mode is requested via devlink. However, the
logic failed to clear this flag if the mode was subsequently changed
back to MLX5_ESWITCH_OFFLOADS (switchdev). Consequently, if a user
toggled from legacy to switchdev, the flag remained set, leaving the
driver with wrong state indicating
Fix this by explicitly clearing the MLX5_PRIV_FLAGS_SWITCH_LEGACY bit
when the requested mode is MLX5_ESWITCH_OFFLOADS.
Fixes: 2a4f56fbcc ("net/mlx5e: Keep netdev when leave switchdev for devlink set legacy only")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_lag_disable_change() unconditionally called mlx5_disable_lag() when
LAG was active, which is incorrect for MLX5_LAG_MODE_MPESW.
Hnece, call mlx5_disable_mpesw() when running in MPESW mode.
Fixes: a32327a3a0 ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
team: Fix reference count leak when changing port netns
Patch #1 fixes a reference count leak that was reported by syzkaller.
The leak happens when a net device that is member in a team is changing
netns. The fix is to align the team driver with the bond driver and have
it suppress NETDEV_CHANGEMTU events for a net device that is being
unregistered.
Without this change, the NETDEV_CHANGEMTU event causes inetdev_event()
to recreate an inet device for this net device in its original netns,
after it was previously destroyed upon NETDEV_UNREGISTER. Later on, when
inetdev_event() receives a NETDEV_REGISTER event for this net device in
the new nents, it simply leaks the reference:
case NETDEV_REGISTER:
pr_debug("%s: bug\n", __func__);
RCU_INIT_POINTER(dev->ip_ptr, NULL);
break;
addrconf_notify() handles this differently and reuses the existing inet6
device if one exists when a NETDEV_REGISTER event is received. This
creates a different problem where it is possible for a net device to
reference an inet6 device that was created in a previous netns.
A more generic fix that we can try in net-next is to revert the changes
in the bond and team drivers and instead have IPv4 and IPv6 destroy and
recreate an inet device if one already exists upon NETDEV_REGISTER.
Patch #2 adds a selftest that passes with the fix and hangs without it.
====================
Link: https://patch.msgid.link/20260224125709.317574-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test for the issue that was fixed in "team: avoid NETDEV_CHANGEMTU
event when unregistering slave".
The test hangs due to a reference count leak without the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
[ 50.681299][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
[ 71.185325][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
And passes with the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
ok 1 selftests: drivers/net/team: refleak.sh
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260224125709.317574-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e0 ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a6
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied.
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Fixes: 3d249d4ca7 ("net: introduce ethernet teaming device")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260224125709.317574-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While testing corner cases in the driver, a use-after-free crash
was found on the service rescan PCI path.
When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup()
destroys gc->service_wq. If the subsequent mana_gd_resume() fails
with -ETIMEDOUT or -EPROTO, the code falls through to
mana_serv_rescan() which triggers pci_stop_and_remove_bus_device().
This invokes the PCI .remove callback (mana_gd_remove), which calls
mana_gd_cleanup() a second time, attempting to destroy the already-
freed workqueue. Fix this by NULL-checking gc->service_wq in
mana_gd_cleanup() and setting it to NULL after destruction.
Call stack of issue for reference:
[Sat Feb 21 18:53:48 2026] Call Trace:
[Sat Feb 21 18:53:48 2026] <TASK>
[Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana]
[Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana]
[Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0
[Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70
[Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250
[Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20
[Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90
[Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30
[Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana]
[Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana]
[Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0
[Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0
[Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130
[Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30
[Sat Feb 21 18:53:48 2026] </TASK>
Fixes: 505cc26bca ("net: mana: Add support for auxiliary device servicing events")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aZ2bzL64NagfyHpg@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace Vinod Koul with Mohd Ayaan Anwar as the maintainer of the
QUALCOMM ETHQOS ETHERNET DRIVER. Vinod confirmed he is no longer
active in this area and agreed to be removed.
Acked-by: Vinod Koul <vkoul@kernel.org>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260224-qcom_ethqos_maintainer-v1-1-24e02701ea52@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devm_add_action_or_reset() function already executes the cleanup
action on failure before returning an error, so the explicit goto error
and subsequent zl3073x_dev_dpll_fini() call causes double cleanup.
Fixes: ebb1031c51 ("dpll: zl3073x: Refactor DPLL initialization")
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260224-dpll-v2-1-d7786414a830@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Baatz says:
====================
tcp: re-enable acceptance of FIN packets when RWIN is 0
this series restores the ability to accept in‑sequence FIN packets
even when the advertised receive window is zero, and adds a
packetdrill test to guard the behavior.
====================
Link: https://patch.msgid.link/20260224-fix_zero_wnd_fin-v2-0-a16677ea7cea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a packetdrill test that verifies we accept bare FIN packets when
the advertised receive window is zero.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260224-fix_zero_wnd_fin-v2-2-a16677ea7cea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 2bd99aef1b ("tcp: accept bare FIN packets under memory
pressure") allowed accepting FIN packets in tcp_data_queue() even when
the receive window was closed, to prevent ACK/FIN loops with broken
clients.
Such a FIN packet is in sequence, but because the FIN consumes a
sequence number, it extends beyond the window. Before commit
9ca48d616e ("tcp: do not accept packets beyond window"),
tcp_sequence() only required the seq to be within the window. After
that change, the entire packet (including the FIN) must fit within the
window. As a result, such FIN packets are now dropped and the handling
path is no longer reached.
Be more lenient by not counting the sequence number consumed by the
FIN when calling tcp_sequence(), restoring the previous behavior for
cases where only the FIN extends beyond the window.
Fixes: 9ca48d616e ("tcp: do not accept packets beyond window")
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260224-fix_zero_wnd_fin-v2-1-a16677ea7cea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
current->nsproxy is should not be accessed directly as syzbot has found
that it could be NULL at times, causing crashes. Fix up the af_vsock
sysctl handlers to use container_of() to deal with the current net
namespace instead of attempting to rely on current.
This is the same type of change done in commit 7f5611cbc4 ("rds:
sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: eafb64f40c ("vsock: add netns to vsock core")
Link: https://patch.msgid.link/2026022318-rearview-gallery-ae13@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/2026022305-substance-virtual-c728@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: d40261236e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Link: https://patch.msgid.link/2026022326-shack-headstone-ef6f@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: Petko Manolov <petkan@nucleusys.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022347-legibly-attest-cc5c@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the device is disconnected from the driver, there is a "dangling"
reference count on the usb interface that was grabbed in the probe
callback. Fix this up by properly dropping the reference after we are
done with it.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: c46ee38620 ("NFC: pn533: add NXP pn533 nfc device driver")
Link: https://patch.msgid.link/2026022329-flashing-ought-7573@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Do not share the page cache if the real @aops differs
- Fix the incomplete condition for interlaced plain extents
- Get rid of more unnecessary #ifdefs
-----BEGIN PGP SIGNATURE-----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=QpbC
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Do not share the page cache if the real @aops differs
- Fix the incomplete condition for interlaced plain extents
- Get rid of more unnecessary #ifdefs
* tag 'erofs-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix interlaced plain identification for encoded extents
erofs: remove more unnecessary #ifdefs
erofs: allow sharing page cache with the same aops only
A workaround was introduced in commit 1fb710793c ("drm/amdgpu: Enable
MES lr_compute_wa by default") to help with some hangs observed in gfx1151.
This WA didn't fully fix the issue. It was actually fixed by adjusting
the VGPR size to the correct value that matched the hardware in commit
b42f3bf953 ("drm/amdkfd: bump minimum vgpr size for gfx1151").
There are reports of instability on other products with newer GC microcode
versions, and I believe they're caused by this workaround. As we don't
need the workaround any more, remove it.
Fixes: b42f3bf953 ("drm/amdkfd: bump minimum vgpr size for gfx1151")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9973e64bd6)
Cc: stable@vger.kernel.org
If the device has not recovered after slot reset is called, it goes to
out label for error handling. There it could make decision based on
uninitialized hive pointer and could result in accessing an uninitialized
list.
Initialize the list and hive properly so that it handles the error
situation and also releases the reset domain lock which is acquired
during error_detected callback.
Fixes: 732c6cefc1 ("drm/amdgpu: Replace tmp_adev with hive in amdgpu_pci_slot_reset")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bb71362182)
This will set AMDGPU_VCN_SMU_DPM_INTERFACE_* smu_type
based on soc type and fixing ring timeout issue seen
for DPM enabled case.
Signed-off-by: sguttula <suresh.guttula@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f0f23c315b)
Do not unlock psp->ras_context.mutex if it has not been locked. This has
been detected by the Clang thread-safety analyzer.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: b3fb79cda5 ("drm/amdgpu: add mutex to protect ras shared memory")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6fa01b4335)
Mutexes must be unlocked before these are destroyed. This has been detected
by the Clang thread-safety analyzer.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: f5e4cc8461 ("drm/amdgpu: implement RAS ACA driver framework")
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 270258ba32)
This can be called while preemption is disabled, for example by
dcn32_internal_validate_bw which is called with the FPU active.
Fixes "BUG: scheduling while atomic" messages I encounter on my Navi31
machine.
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b42dae2ebc)
Cc: stable@vger.kernel.org
Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
v2: squash in Srini's fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fcec012c66)
Cc: stable@vger.kernel.org
Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be267e15f9)
Cc: stable@vger.kernel.org
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: a292fdecd7 ("drm/amdgpu: Implement userqueue signal/wait IOCTL")
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2c333ea579)
Drop reference to syncobj and timeline fence when aborting the ioctl due
output array being too small.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: a292fdecd7 ("drm/amdgpu: Implement userqueue signal/wait IOCTL")
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68951e9c3e)
Cc: <stable@vger.kernel.org> # v6.16+
Using legacy driver with latest firmware causes a power off issue.
Fix this by assigning a different filename (npu_7.sbin) to the latest
firmware. The driver attempts to load the latest firmware first and falls
back to the previous firmware version if loading fails.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5009
Fixes: f1eac46fe5 ("accel/amdxdna: Update firmware version check for latest firmware")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260225204752.2711734-1-lizhi.hou@amd.com
Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X
interrupt to the host using a writel(), which generates a PCI posted write
transaction. There's no completion for posted writes, so the writel() may
return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also
unmaps the outbound ATU entry used for the PCI write, so the write races
with the unmap.
If the PCI write loses the race with the ATU unmap, the write may corrupt
host memory or cause IOMMU errors, e.g., these when running fio with a
larger queue depth against nvmet-pci-epf:
arm-smmu-v3 fc900000.iommu: 0x0000010000000010
arm-smmu-v3 fc900000.iommu: 0x0000020000000000
arm-smmu-v3 fc900000.iommu: 0x000000090000f040
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0
arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0
Flush the write by performing a readl() of the same address to ensure that
the write has reached the destination before the ATU entry is unmapped.
The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit
8719c64e76 ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there
it was solved by dedicating an outbound iATU only for MSI. We can't do the
same for MSI-X because each vector can have a different msg_addr and the
msg_addr may be changed while the vector is masked.
Fixes: beb4641a78 ("PCI: dwc: Add MSI-X callbacks handler")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260211175540.105677-2-cassel@kernel.org
Endpoint drivers use dw_pcie_ep_raise_msi_irq() to raise MSI interrupts to
the host. After 8719c64e76 ("PCI: dwc: ep: Cache MSI outbound iATU
mapping"), dw_pcie_ep_raise_msi_irq() caches the Message Address from the
MSI Capability in ep->msi_msg_addr. But that Message Address is controlled
by the host, and it may change. For example, if:
- firmware on the host configures the Message Address and triggers an
MSI,
- a driver on the Endpoint raises the MSI via dw_pcie_ep_raise_msi_irq(),
which caches the Message Address,
- a kernel on the host reconfigures the Message Address and the host
kernel driver triggers another MSI,
dw_pcie_ep_raise_msi_irq() notices that the Message Address no longer
matches the cached ep->msi_msg_addr, warns about it, and returns error
instead of raising the MSI. The host kernel may hang because it never
receives the MSI.
This was seen with the nvmet_pci_epf_driver: the host UEFI performs NVMe
commands, e.g. Identify Controller to get the name of the controller,
nvmet-pci-epf posts the completion queue entry and raises an IRQ using
dw_pcie_ep_raise_msi_irq(). When the host boots Linux, we see a
WARN_ON_ONCE() from dw_pcie_ep_raise_msi_irq(), and the host kernel hangs
because the nvme driver never gets an IRQ.
Remove the warning when dw_pcie_ep_raise_msi_irq() notices that Message
Address has changed, remap using the new address, and update the
ep->msi_msg_addr cache.
Fixes: 8719c64e76 ("PCI: dwc: ep: Cache MSI outbound iATU mapping")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260210181225.3926165-2-cassel@kernel.org
The ARM64_WORKAROUND_REPEAT_TLBI workaround is used to mitigate several
errata where broadcast TLBI;DSB sequences don't provide all the
architecturally required synchronization. The workaround performs more
work than necessary, and can have significant overhead. This patch
optimizes the workaround, as explained below.
The workaround was originally added for Qualcomm Falkor erratum 1009 in
commit:
d9ff80f83e ("arm64: Work around Falkor erratum 1009")
As noted in the message for that commit, the workaround is applied even
in cases where it is not strictly necessary.
The workaround was later reused without changes for:
* Arm Cortex-A76 erratum #1286807
SDEN v33: https://developer.arm.com/documentation/SDEN-885749/33-0/
* Arm Cortex-A55 erratum #2441007
SDEN v16: https://developer.arm.com/documentation/SDEN-859338/1600/
* Arm Cortex-A510 erratum #2441009
SDEN v19: https://developer.arm.com/documentation/SDEN-1873351/1900/
The important details to note are as follows:
1. All relevant errata only affect the ordering and/or completion of
memory accesses which have been translated by an invalidated TLB
entry. The actual invalidation of TLB entries is unaffected.
2. The existing workaround is applied to both broadcast and local TLB
invalidation, whereas for all relevant errata it is only necessary to
apply a workaround for broadcast invalidation.
3. The existing workaround replaces every TLBI with a TLBI;DSB;TLBI
sequence, whereas for all relevant errata it is only necessary to
execute a single additional TLBI;DSB sequence after any number of
TLBIs are completed by a DSB.
For example, for a sequence of batched TLBIs:
TLBI <op1>[, <arg1>]
TLBI <op2>[, <arg2>]
TLBI <op3>[, <arg3>]
DSB ISH
... the existing workaround will expand this to:
TLBI <op1>[, <arg1>]
DSB ISH // additional
TLBI <op1>[, <arg1>] // additional
TLBI <op2>[, <arg2>]
DSB ISH // additional
TLBI <op2>[, <arg2>] // additional
TLBI <op3>[, <arg3>]
DSB ISH // additional
TLBI <op3>[, <arg3>] // additional
DSB ISH
... whereas it is sufficient to have:
TLBI <op1>[, <arg1>]
TLBI <op2>[, <arg2>]
TLBI <op3>[, <arg3>]
DSB ISH
TLBI <opX>[, <argX>] // additional
DSB ISH // additional
Using a single additional TBLI and DSB at the end of the sequence can
have significantly lower overhead as each DSB which completes a TLBI
must synchronize with other PEs in the system, with potential
performance effects both locally and system-wide.
4. The existing workaround repeats each specific TLBI operation, whereas
for all relevant errata it is sufficient for the additional TLBI to
use *any* operation which will be broadcast, regardless of which
translation regime or stage of translation the operation applies to.
For example, for a single TLBI:
TLBI ALLE2IS
DSB ISH
... the existing workaround will expand this to:
TLBI ALLE2IS
DSB ISH
TLBI ALLE2IS // additional
DSB ISH // additional
... whereas it is sufficient to have:
TLBI ALLE2IS
DSB ISH
TLBI VALE1IS, XZR // additional
DSB ISH // additional
As the additional TLBI doesn't have to match a specific earlier TLBI,
the additional TLBI can be implemented in separate code, with no
memory of the earlier TLBIs. The additional TLBI can also use a
cheaper TLBI operation.
5. The existing workaround is applied to both Stage-1 and Stage-2 TLB
invalidation, whereas for all relevant errata it is only necessary to
apply a workaround for Stage-1 invalidation.
Architecturally, TLBI operations which invalidate only Stage-2
information (e.g. IPAS2E1IS) are not required to invalidate TLB
entries which combine information from Stage-1 and Stage-2
translation table entries, and consequently may not complete memory
accesses translated by those combined entries. In these cases,
completion of memory accesses is only guaranteed after subsequent
invalidation of Stage-1 information (e.g. VMALLE1IS).
Taking the above points into account, this patch reworks the workaround
logic to reduce overhead:
* New __tlbi_sync_s1ish() and __tlbi_sync_s1ish_hyp() functions are
added and used in place of any dsb(ish) which is used to complete
broadcast Stage-1 TLB maintenance. When the
ARM64_WORKAROUND_REPEAT_TLBI workaround is enabled, these helpers will
execute an additional TLBI;DSB sequence.
For consistency, it might make sense to add __tlbi_sync_*() helpers
for local and stage 2 maintenance. For now I've left those with
open-coded dsb() to keep the diff small.
* The duplication of TLBIs in __TLBI_0() and __TLBI_1() is removed. This
is no longer needed as the necessary synchronization will happen in
__tlbi_sync_s1ish() or __tlbi_sync_s1ish_hyp().
* The additional TLBI operation is chosen to have minimal impact:
- __tlbi_sync_s1ish() uses "TLBI VALE1IS, XZR". This is only used at
EL1 or at EL2 with {E2H,TGE}=={1,1}, where it will target an unused
entry for the reserved ASID in the kernel's own translation regime,
and have no adverse affect.
- __tlbi_sync_s1ish_hyp() uses "TLBI VALE2IS, XZR". This is only used
in hyp code, where it will target an unused entry in the hyp code's
TTBR0 mapping, and should have no adverse effect.
* As __TLBI_0() and __TLBI_1() no longer replace each TLBI with a
TLBI;DSB;TLBI sequence, batching TLBIs is worthwhile, and there's no
need for arch_tlbbatch_should_defer() to consider
ARM64_WORKAROUND_REPEAT_TLBI.
When building defconfig with GCC 15.1.0, compared to v6.19-rc1, this
patch saves ~1KiB of text, makes the vmlinux ~42KiB smaller, and makes
the resulting Image 64KiB smaller:
| [mark@lakrids:~/src/linux]% size vmlinux-*
| text data bss dec hex filename
| 21179831 19660919 708216 41548966 279fca6 vmlinux-after
| 21181075 19660903 708216 41550194 27a0172 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -l vmlinux-*
| -rwxr-xr-x 1 mark mark 157771472 Feb 4 12:05 vmlinux-after
| -rwxr-xr-x 1 mark mark 157815432 Feb 4 12:05 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -l Image-*
| -rw-r--r-- 1 mark mark 41007616 Feb 4 12:05 Image-after
| -rw-r--r-- 1 mark mark 41073152 Feb 4 12:05 Image-before
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The TLBI instruction accepts XZR as a register argument, and for TLBI
operations with a register argument, there is no functional difference
between using XZR or another GPR which contains zeroes. Operations
without a register argument are encoded as if XZR were used.
Allow the __TLBI_1() macro to use XZR when a register argument is all
zeroes.
Today this only results in a trivial code saving in
__do_compat_cache_op()'s workaround for Neoverse-N1 erratum #1542419. In
subsequent patches this pattern will be used more generally.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
A GCS mapping should not be accessible after mprotect(PROT_NONE). Add a
kselftest for this scenario.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
vm_get_page_prot() short-circuits the protection_map[] lookup for a
VM_SHADOW_STACK mapping since it uses a different PIE index from the
typical read/write/exec permissions. However, the side effect is that it
also ignores mprotect(PROT_NONE) by creating an accessible PTE.
Special-case the !(vm_flags & VM_ACCESS_FLAGS) flags to use the
protection_map[VM_NONE] permissions instead. No GCS attributes are
required for an inaccessible PTE.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 6497b66ba6 ("arm64/mm: Map pages for guarded control stack")
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The only caller of ioremap_prot() outside of the generic ioremap()
implementation is generic_access_phys(), which passes a 'pgprot_t' value
determined from the user mapping of the target 'pfn' being accessed by
the kernel. On arm64, the 'pgprot_t' contains all of the non-address
bits from the pte, including the permission controls, and so we end up
returning a new user mapping from ioremap_prot() which faults when
accessed from the kernel on systems with PAN:
| Unable to handle kernel read from unreadable memory at virtual address ffff80008ea89000
| ...
| Call trace:
| __memcpy_fromio+0x80/0xf8
| generic_access_phys+0x20c/0x2b8
| __access_remote_vm+0x46c/0x5b8
| access_remote_vm+0x18/0x30
| environ_read+0x238/0x3e8
| vfs_read+0xe4/0x2b0
| ksys_read+0xcc/0x178
| __arm64_sys_read+0x4c/0x68
Extract only the memory type from the user 'pgprot_t' in ioremap_prot()
and assert that we're being passed a user mapping, to protect us against
any changes in future that may require additional handling. To avoid
falsely flagging users of ioremap(), provide our own ioremap() macro
which simply wraps __ioremap_prot().
Cc: Zeng Heng <zengheng4@huawei.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 893dea9ccd ("arm64: Add HAVE_IOREMAP_PROT support")
Reported-by: Jinjiang Tu <tujinjiang@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Rename our ioremap_prot() implementation to __ioremap_prot() and convert
all arch-internal callers over to the new function.
ioremap_prot() remains as a #define to __ioremap_prot() for
generic_access_phys() and will be subsequently extended to handle user
permissions in 'prot'.
Cc: Zeng Heng <zengheng4@huawei.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, forgot to consider the case where the deferred QC
times out. Fix the code to take timeouts into consideration, which
avoids a use after free (Damien)
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, when unloading the module, calls cancel_work_sync(),
a function that can sleep, while holding a spin lock. Move the function
call outside the lock (Damien)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCaZ8EIgAKCRDJZDGjmcZN
cpRxAPwIr05t8DBcuSHXbxexUUtgk3uZ27yirTd1fnDHPJDwjgD+JuquvSZD0Kjv
sofEpFt6h7sGrExF+dz9wl9rMsehGwk=
=BNkD
-----END PGP SIGNATURE-----
Merge tag 'ata-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, forgot to consider the case where the deferred QC
times out. Fix the code to take timeouts into consideration, which
avoids a use after free (Damien)
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, when unloading the module, calls cancel_work_sync(),
a function that can sleep, while holding a spin lock. Move the function
call outside the lock (Damien)
* tag 'ata-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: fix cancellation of a port deferred qc work
ata: libata-eh: correctly handle deferred qc timeouts
Please consider pulling these changes from the signed vfs-7.0-rc2.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaZ7xWAAKCRCRxhvAZXjc
onpeAP4qOrTURIAX9M/NGCHywvjI91ZJt20J6vm0X6KbVV/ebQD/eoJ21xzPhG9M
gN7oRcZ9SW3e/AdtdnlqB0PEP+cyGwM=
=9Ji+
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.0-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix an uninitialized variable in file_getattr().
The flags_valid field wasn't initialized before calling
vfs_fileattr_get(), triggering KMSAN uninit-value reports in fuse
- Fix writeback wakeup and logging timeouts when DETECT_HUNG_TASK is
not enabled.
sysctl_hung_task_timeout_secs is 0 in that case causing spurious
"waiting for writeback completion for more than 1 seconds" warnings
- Fix a null-ptr-deref in do_statmount() when the mount is internal
- Add missing kernel-doc description for the @private parameter in
iomap_readahead()
- Fix mount namespace creation to hold namespace_sem across the mount
copy in create_new_namespace().
The previous drop-and-reacquire pattern was fragile and failed to
clean up mount propagation links if the real rootfs was a shared or
dependent mount
- Fix /proc mount iteration where m->index wasn't updated when
m->show() overflows, causing a restart to repeatedly show the same
mount entry in a rapidly expanding mount table
- Return EFSCORRUPTED instead of ENOSPC in minix_new_inode() when the
inode number is out of range
- Fix unshare(2) when CLONE_NEWNS is set and current->fs isn't shared.
copy_mnt_ns() received the live fs_struct so if a subsequent
namespace creation failed the rollback would leave pwd and root
pointing to detached mounts. Always allocate a new fs_struct when
CLONE_NEWNS is requested
- fserror bug fixes:
- Remove the unused fsnotify_sb_error() helper now that all callers
have been converted to fserror_report_metadata
- Fix a lockdep splat in fserror_report() where igrab() takes
inode::i_lock which can be held in IRQ context.
Replace igrab() with a direct i_count bump since filesystems
should not report inodes that are about to be freed or not yet
exposed
- Handle error pointer in procfs for try_lookup_noperm()
- Fix an integer overflow in ep_loop_check_proc() where recursive calls
returning INT_MAX would overflow when +1 is added, breaking the
recursion depth check
- Fix a misleading break in pidfs
* tag 'vfs-7.0-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: avoid misleading break
eventpoll: Fix integer overflow in ep_loop_check_proc()
proc: Fix pointer error dereference
fserror: fix lockdep complaint when igrabbing inode
fsnotify: drop unused helper
unshare: fix unshare_fs() handling
minix: Correct errno in minix_new_inode
namespace: fix proc mount iteration
mount: hold namespace_sem across copy in create_new_namespace()
iomap: Describe @private in iomap_readahead()
statmount: Fix the null-ptr-deref in do_statmount()
writeback: Fix wakeup and logging timeouts for !DETECT_HUNG_TASK
fs: init flags_valid before calling vfs_fileattr_get
Use the kernel.org address as a unified single entry to send patches
to. At the same time, update mailmap to group all past contributions.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When Linux is running as guest, runs a user space process and the
user space process accesses a page that the host has paged out,
the guest gets a pfault interrupt and schedules a different process.
Without this mechanism the host would have to suspend the whole
virtual CPU until the page has been paged in.
To setup the pfault interrupt the real address of parameter list
should be passed to DIAGNOSE 0x258, but a virtual address is passed
instead.
That has a performance impact, since the pfault setup never succeeds,
the interrupt is never delivered to a guest and the whole virtual CPU
is suspended as result.
Cc: stable@vger.kernel.org
Fixes: c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
s390_reset_system() calls set_prefix(0), which switches back to the
absolute lowcore. At that point the stack protector canary no longer
matches the canary from the lowcore the function was entered with, so
the stack check fails.
Mark s390_reset_system() __no_stack_protector. This is safe here since
its callers (__do_machine_kdump() and __do_machine_kexec()) are
effectively no-return and fall back to disabled_wait() on failure.
Fixes: f5730d44e0 ("s390: Add stackprotector support")
Reported-by: Nikita Dubrovskii <nikita@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull a small idle/vtime series with two cputime accounting fixes plus
related cleanups and minor improvements.
* idle-vtime-fixes-cleanups:
s390/idle: Remove psw_idle() prototype
s390/vtime: Use lockdep_assert_irqs_disabled() instead of BUG_ON()
s390/vtime: Use __this_cpu_read() / get rid of READ_ONCE()
s390/irq/idle: Remove psw bits early
s390/idle: Inline update_timer_idle()
s390/idle: Slightly optimize idle time accounting
s390/idle: Add comment for non obvious code
s390/vtime: Fix virtual timer forwarding
s390/idle: Fix cpu idle exit cpu time accounting
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
psw_idle() does not exist anymore. Remove its prototype.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use lockdep_assert_irqs_disabled() instead of BUG_ON(). This avoids
crashing the kernel, and generates better code if CONFIG_PROVE_LOCKING
is disabled.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
do_account_vtime() runs always with interrupts disabled, therefore use
__this_cpu_read() instead of this_cpu_read() to get rid of a pointless
preempt_disable() / preempt_enable() pair.
Also there are no concurrent writers to the cpu time accounting fields
in lowcore. Therefore get rid of READ_ONCE() usages.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove wait, io, external interrupt bits early in do_io_irq()/do_ext_irq()
when previous context was idle. This saves one conditional branch and is
closer to the original old assembly code.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Inline update_timer_idle() again to avoid an extra function call. This
way the generated code is close to old assembler version again.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
