The CSI-2 receiver can be instantiated with up to four output channels.
This is an integration-specific property, specify the number of
instantiated channels through a new fsl,num-channels property. The
property is optional, and defaults to 1 as only one channel is currently
supported by drivers.
Using the compatible string to infer the number of channels has been
considered, but multiple instances of the same CSIS in the same SoC
could conceptually be synthesized with a different number of channels.
An explicit property is therefore more appropriate.
The only known SoC to have more than one channel is the i.MX8MP. As the
binding examples do not cover that SoC, don't update them.
Link: https://lore.kernel.org/r/20250822002734.23516-12-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Usage of the clock-frequency property, which is already optional, is
discouraged in favour of using assigned-clock-rates (and
assigned-clock-parents where needed). Mark the property as deprecated,
and update the examples accordingly.
Link: https://lore.kernel.org/r/20250822002734.23516-11-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The imx-mipi-csis driver sets the rate of the wrap clock to the value
specified in the device tree's "clock-frequency" property, and defaults
to 166 MHz otherwise. This is a historical mistake, as clock rate
selection should have been left to the assigned-clock-rates property.
Honouring the clock-frequency property can't be removed without breaking
backwards compatibility, and the corresponding code isn't very
intrusive. The 166 MHz default, on the other hand, prevents
configuration of the clock rate through assigned-clock-rates, as the
driver immediately overwrites the rate. This behaviour is confusing and
has cost debugging time.
There is little value in a 166 MHz default. All mainline device tree
sources that enable the CSIS specify a clock-frequency explicitly, and
the default wrap clock configuration on supported platforms is at least
as high as 166 MHz. Drop the default, and only set the clock rate
manually when the clock-frequency property is specified.
Link: https://lore.kernel.org/r/20250822002734.23516-10-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CSIS has per-line start of transmission error interrupts. Log them
all, instead of only the first data lane.
Link: https://lore.kernel.org/r/20250822002734.23516-9-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Commit 95a1379004 ("media: staging: media: imx: imx7-mipi-csis: Dump
MIPI_CSIS_FRAME_COUNTER_CH0 register") forgot to increase the maximum
register name length, resulting in misalignment of names printed in the
kernel log. Fix it.
Link: https://lore.kernel.org/r/20250822002734.23516-8-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Multiple register field mask macros use GENMASK, while other define the
mask value manually. Standardize on GENMASK everywhere, as well as on
the _MASK suffix to name the macros. This improves consistency and helps
with readability.
No functional change is intended.
Link: https://lore.kernel.org/r/20250822002734.23516-7-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CSIS driver uses register macro names that do not match the
reference manual of the i.MX7[DS] and i.MX8M[MNP] SoCs in which the CSIS
is integrated. Rename them to match the documentation, making the code
easier to read alongside the reference manuals.
One of the misnamed register fields is MIPI_CSIS_INT_SRC_ERR_UNKNOWN,
which led to the corresponding event being logged as "Unknown Error".
The correct register field name is MIPI_CSIS_INT_SRC_ERR_ID, documented
as "Unknown ID error". Update the event description accordingly.
While at it, also replace a few *_OFFSET macros with parametric macros
for consistency, and add the missing MIPI_CSIS_ISP_RESOL_VRESOL and
MIPI_CSIS_ISP_RESOL_HRESOL register field macros.
No functional change intended.
Link: https://lore.kernel.org/r/20250822002734.23516-6-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Rename sd_state to state to standardize the naming of the subdev state
variables and help shortening lines.
No functional change is intended.
Link: https://lore.kernel.org/r/20250822002734.23516-5-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The const keyword for pointer variables is placed before the type
everywhere except in one location. Change it to improve consistency.
No functional change is intended.
Link: https://lore.kernel.org/r/20250822002734.23516-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The mipi_csis_calculate_params() function needs to access the pad of the
connected source. The pad is already available in csis->source.pad, but
the function takes a convoluted path by getting the pad index and
indexing the source subdev's pads array. Simplify it.
No functional change is intended.
Link: https://lore.kernel.org/r/20250822002734.23516-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The v4l2_get_link_freq() macro doesn't modify the pad argument. Make it
possible to call it with a const media_pad pointer.
Link: https://lore.kernel.org/r/20250822002734.23516-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Compare the whole v4l2_bt_timings struct, not just the width/height when
setting new timings. Timings with the same resolution and different
pixelclock can now be properly set.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
ASPEED BMC IC has 2 different display engines. Please find AST2600's
datasheet to get detailed information.
1. VGA on PCIe
2. SoC Display (GFX)
By default, video engine (VE) will capture video from VGA. This patch
adds an option to capture video from GFX with standard ioctl,
vidioc_s_input.
An enum, aspeed_video_input, is added for this purpose.
enum aspeed_video_input {
VIDEO_INPUT_VGA = 0,
VIDEO_INPUT_GFX,
VIDEO_INPUT_MAX
};
To test this feature, you will need to enable GFX first. Please refer to
ASPEED's SDK_User_Guide, 6.3.x Soc Display driver, for more information.
In your application, you will need to use v4l2 ioctl, VIDIOC_S_INPUT, as
below to select before start streaming.
int rc;
struct v4l2_input input;
input.index = VIDEO_INPUT_GFX;
rc = ioctl(fd, VIDIOC_S_INPUT, &input);
if (rc < 0)
{
...
}
Link: https://github.com/AspeedTech-BMC/openbmc/releases
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: split up three overly long lines]
When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The em28xx driver uses the old-style gpio_request_one() interface to
switch the lna on the PCTV 290E card.
This interface is becoming optional and should no longer be called by
portable drivers. As I could not figure out an obvious replacement,
select the new GPIOLIB_LEGACY symbol as a workaround.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The s5p_mfc_cmd_args structure in the v6 driver is never used, not
initialized to anything other than zero, but as of clang-21 this
causes a warning:
drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c:45:7: error: variable 'h2r_args' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
45 | &h2r_args);
| ^~~~~~~~
Just remove this for simplicity. Since the function is also called
through a callback, this does require adding a trivial wrapper with
the correct prototype.
Fixes: f96f3cfa0b ("[media] s5p-mfc: Update MFC v4l2 driver to support MFC6.x")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some definitions use a tab after the define keyword instead of the
usual single space. Replace it for better consistency.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The colorimetry controls class is defined after the stateless codec
class at the top of the controls header. It is currently defined in
the middle of stateless codec controls.
Move the colorimetry controls after the stateless codec controls,
at the end of the file.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
There is an extraneous space before a newline in a dprintk message.
Remove the space.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
There are incorrect %u format specifiers being used to for signed integers,
fix this by using %d instead.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The FSF does not reside in 59 Temple Place anymore, so we should
not ask the people to write to that address in case they need a
copy of the GPL.
Anyway, all other files in this directory already had their boilerplate
text replaced by a proper SPDX tag in the earlier commit 1a59d1b8e0
("treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156"),
so let's do the same in the remaining files now, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
There are spelling mistakes in the DVB_DS3000 and DVB_TS2020
config. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Replace two instances of (1 << X) with BIT(X) in tegra20.c to follow
kernel coding style guidelines and improve clarity. The BIT() macro
also ensures proper type handling for larger shifts.
Signed-off-by: A.T. Jefferies <alextjefferies@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Delete the external-module style Makefile commands. They are not needed
for in-tree modules.
This is the only Makefile in the kernel tree (aside from tools/ and
samples/) that uses this Makefile style.
The same files are built with or without this patch.
Fixes: 056f2821b6 ("media: cec: extron-da-hd-4k-plus: add the Extron DA HD 4K Plus CEC driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix potential leak of uninitialized stack data to userspace by ensuring
that the `scan` structure is zeroed before use.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The code in flexcop.c has several instances where spaces are missing
after commas in function call arguments. This violates the Linux
kernel coding style guidelines.
This patch cleans up these minor style issues by adding the required
spaces. This is a purely stylistic change with no functional impact
and improves overall code readability and consistency.
Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The DMA map functions can fail and should be tested for errors.
If the mapping fails, free blanking_ptr and set it to 0. As 0 is a
valid DMA address, use blanking_ptr to test if the DMA address
is set.
Fixes: 1a0adaf37c ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Benoit has moved to work in other technical areas, and Yemike Abhilash will
maintain these modules instead of him.
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This comment explains why we return success when usb_alloc_noncoherent()
fails and I think it's helpful. It was deleted during a recent refactor,
but let's add it back.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CLIP macro, which was used to clamp color component values to the
[0, 255] range, is no longer used anywhere in the vim2m driver. Remove it
to clean up the code and avoid confusion.
The following issues were reported by checkpatch:
ERROR: Macros with complex values should be enclosed in parentheses
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Nothing has checked the zr36067_debug variable since 2021 after
commit efdd0d42e2 ("media: staging: media: zoran: remove
detect_guest_activity")
It's set as a module parameter, remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The DMA map functions can fail and should be tested for errors.
If the mapping fails, dealloc buffers, and return.
Fixes: 1c1e45d17b ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix typos and punctuation and improve grammar in documentation.
Signed-off-by: Hanne-Lotta Mäenpää <hannelotta@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Reuse existing functionality from usb_endpoint_is_isoc_in() instead of
keeping duplicate source code.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use the function usb_endpoint_dir_in() and usb_endpoint_type()
rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Building with a reduced stack warning limit shows that delta_mjpeg_decode()
copies a giant structure to the stack each time but only uses three of
its members:
drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c: In function 'delta_mjpeg_decode':
drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c:427:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Open-code the passing of the structure members that are actually used here.
Fixes: 433ff5b4a2 ("[media] st-delta: add mjpeg support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When exploring links, a message is printed to indicate unconnected pads
being added. The message prints the entity name only. Print the origin
pad number as well to help with debugging pipeline start issues. While
at it, get the entity name from origin->entity instead of local->entity.
Both point to the same entity, but the former conveys the meaning
better.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Commit b3decc5ce7 ("media: mc: Expand MUST_CONNECT flag to always
require an enabled link") expanded the meaning of the MUST_CONNECT flag
to require an enabled link in all cases. To do so, the link exploration
code was expanded to cover unconnected pads, in order to reject those
that have the MUST_CONNECT flag set. The implementation was however
incorrect, ignoring unconnected pads instead of ignoring connected pads.
Fix it.
Reported-by: Martin Kepplinger-Novaković <martink@posteo.de>
Closes: https://lore.kernel.org/linux-media/20250205172957.182362-1-martink@posteo.de
Reported-by: Maud Spierings <maudspierings@gocontroll.com>
Closes: https://lore.kernel.org/linux-media/20250818-imx8_isi-v1-1-e9cfe994c435@gocontroll.com
Fixes: b3decc5ce7 ("media: mc: Expand MUST_CONNECT flag to always require an enabled link")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Maud Spierings <maudspierings@gocontroll.com>
Tested-by: Martin Kepplinger-Novaković <martink@posteo.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In 'stm32_csi_start', 'csidev->s_subdev' is dereferenced directly while
assigning a value to the 'src_pad'. However the same value is being
checked against NULL at a later point of time indicating that there
are chances that the value can be NULL.
Move the dereference after the NULL check.
Fixes: e7bad98c20 ("media: v4l: Convert the users of v4l2_get_link_freq to call it on a pad")
Cc: stable@vger.kernel.org
Signed-off-by: Chandra Mohan Sundar <chandramohan.explore@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Multiple Sony IMX sensor drivers have mixed up logical and line level
for XCLR signal. They call it a reset signal (it indeed behaves like
that), but drivers assert the reset to operate which is clearly
incorrect and relies on incorrect DTS.
People in discussions copy existing poor code and claim they can repeat
same mistake, so add a note to prevent that.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The duster register needs to be disabled on test patterns. While the
code is correctly doing so, the register address contained a typo, thus
not disabling the duster correctly. Fix the typo.
Fixes: e56616d7b2 ("media: i2c: Add driver for ST VD55G1 camera sensor")
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
IPU7 ISYS and PSYS auxiliary devices are released after
ipu7_bus_del_devices(), so driver can not reference the MMU devices
from ISYS and PSYS auxiliary devices, so move the MMUs cleanup before
releasing the auxiliary devices.
Fixes: b7fe4c0019 ("media: staging/ipu7: add Intel IPU7 PCI device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
[Sakari Ailus: Drop extra newline.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Driver better not dev_set_name() to change the PCI device
name, so remove it.
Fixes: b7fe4c0019 ("media: staging/ipu7: add Intel IPU7 PCI device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
pci_enable_msi() is a deprecated API, thus switch to use modern
pci_alloc_irq_vectors().
Fixes: b7fe4c0019 ("media: staging/ipu7: add Intel IPU7 PCI device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for negotiating the highest possible pixel mode (from
single, dual, quad) with the Cadence CSI2RX bridge. This is required to
drain the Cadence stream FIFOs without overflowing when the source is
operating at a high link-frequency [1].
Also, update the Kconfig as this introduces a hard build-time dependency
on the Cadence CSI2RX driver, even for a COMPILE_TEST.
[1] Section 12.6.1.4.8.14 CSI_RX_IF Programming Restrictions of AM62 TRM
Link: https://www.ti.com/lit/pdf/spruj16
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The output pixel interface is a parallel bus (32 bits), which
supports sending multiple pixels (1, 2 or 4) per clock cycle for
smaller pixel widths like RAW8-RAW16.
Dual-pixel and Quad-pixel modes can be a requirement if the export rate
of the Cadence IP in Single-pixel mode maxes out before the maximum
supported DPHY-RX frequency, which is the case with TI's integration of
this IP [1].
So, we export a function that lets the downstream hardware block request
a higher pixel-per-clock on a particular output pad.
We check if we can support the requested pixels per clock given the
known maximum for the currently configured format. If not, we set it
to the highest feasible value and return this value to the caller.
[1] Section 12.6.1.4.8.14 CSI_RX_IF Programming Restrictions of AM62 TRM
Link: https://www.ti.com/lit/pdf/spruj16
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use v4l2_subdev_get_fwnode_pad_1_to_1() as the get_fwnode_pad operation.
Cadence CSI2RX maps port numbers and pad indices 1:1.
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
We don't use OF ports and remote-endpoints to connect the CSI2RX bridge
and this device in the device tree, thus it is wrong to use
v4l2_create_fwnode_links_to_pad() to create the media graph link between
the two.
It works out on accident, as neither the source nor the sink implement
the .get_fwnode_pad() callback, and the framework helper falls back on
using the first source and sink pads to create the link between them.
Instead, manually create the media link from the first source pad of the
bridge to the first sink pad of the J721E CSI2RX.
Fixes: b4a3d877dc ("media: ti: Add CSI2RX support for J721E")
Cc: stable@vger.kernel.org
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
