Add SPDX-License-Identifier lines to some files where
they are missing in the net/wireless directory.
Remove licensing text from individual files headers (where
present) to canonicalize the library references.
Use (mostly) either GPL-2.0 or ISC, depending on the
license wording (or not) in the files.
radiotap.c does not mention which BSD variant it intends for the
license. My selection of 'OR BSD-2-Clause' for radiotap.c was
based on research into this code's history and its licensing
elsewhere. In OpenBSD, radiotap code (which likely either
derived from this code, or this code was derived from) has the
BSD-2-Clause license. Very similar code in the radiotap library
user space tool, by the same authors Andy Green and Johannes
Berg, has an ISC license. Also the ISC license is used by
Johannes for other contributions in the Linux wireless system.
Since the radiotap.c license text here mentions BSD, but not a
specific version, I chose the closest BSD variant to ISC, which
is BSD-2-Clause.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://patch.msgid.link/20260305220422.24161-1-tim.bird@sony.com
[modify subject since it's not all radiotap]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The action code actually serves to identify the type of action
frame, so it really isn't part of the per-type structure. Pull
it out and have it in the general action frame format.
In theory, whether or not the action code is present in this
way is up to each category, but all categories that are defined
right now all have that value.
While at it, and since this change requires changing all users,
remove the 'u' and make it an anonymous union in this case, so
that all code using this changes.
Change IEEE80211_MIN_ACTION_SIZE to take an argument which says
how much of the frame is needed, e.g. category, action_code or
the specific frame type that's defined in the union. Again this
also ensures that all code is updated.
In some cases, fix bugs where the SKB length was checked after
having accessed beyond the checked length, in particular in FTM
code, e.g. ieee80211_is_ftm().
Link: https://patch.msgid.link/20260226183607.67e71846b59e.I9a24328e3ffcaae179466a935f1c3345029f9961@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-7.0-rc3).
No conflicts.
Adjacent changes:
net/netfilter/nft_set_rbtree.c
fb7fb40163 ("netfilter: nf_tables: clone set on flush only")
3aea466a43 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched: fq: clear q->band_pkt_count[] in fq_reset()
- sched: only allow act_ct to bind to clsact/ingress qdiscs and
shared blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XGBM
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what functions
to ignore. The trace_graph_return() was updated to handle this, but
when function_graph tracer is using a threshold (only trace functions
that took longer than a specified time), it uses
trace_graph_thresh_return() instead. This function was still incorrectly
using the task struct recursion word causing the function graph tracer to
permanently set all functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of being
on the fgraph descriptor, the calculations for the amount of sleep time
was updated. The calculation was done in the trace_graph_thresh_return()
function, which also called the trace_graph_return(), which did the
calculation again, causing the time to be doubled.
Remove the call to trace_graph_return() as what it needed to do wasn't
that much, and just do the work in trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the raw_syscall
tracepoints. When the first syscall event is enabled, it enables the
raw_syscall tracepoint and doesn't need to do anything when a second
syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init.
This is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different
types of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled. The problem happened is that this
"disable-enable" is done one at a time. If more than one syscall event
is specified on the command line, by disabling them one at a time,
the counter never gets to zero, and the raw_syscall is not disabled and
enabled, keeping the syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will ensure
the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables protected
by RCU (preemption disabled). Now that tracepoint callbacks are called with
preemption enabled, this protection needs to be added explicitly, and
not depend on the functions being called with preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY. But
this does not prevent the application from calling madvise(MADVISE_DOFORK).
This causes the mapping to be copied on fork. After the first tasks exits,
the mapping is considered unmapped by everyone. But when he second task
exits, the counter goes below zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace ring
buffer (although two mappings may mess each other up), there's no reason
to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get all
*ftrace* files.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaamiIBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qulnAP9ZO6iChQL0hX/Xuu2VyRhVz0Svf8Sg
iq2IUHP48twOogEApR4zeelMORxdKqkLR+BajZUVFR1PukVbMaszPr9GoQw=
=H9pj
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what
functions to ignore. The trace_graph_return() was updated to handle
this, but when function_graph tracer is using a threshold (only trace
functions that took longer than a specified time), it uses
trace_graph_thresh_return() instead.
This function was still incorrectly using the task struct recursion
word causing the function graph tracer to permanently set all
functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of
being on the fgraph descriptor, the calculations for the amount of
sleep time was updated. The calculation was done in the
trace_graph_thresh_return() function, which also called the
trace_graph_return(), which did the calculation again, causing the
time to be doubled.
Remove the call to trace_graph_return() as what it needed to do
wasn't that much, and just do the work in
trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the
raw_syscall tracepoints. When the first syscall event is enabled, it
enables the raw_syscall tracepoint and doesn't need to do anything
when a second syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init. This
is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different types
of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled.
The problem happened is that this "disable-enable" is done one at a
time. If more than one syscall event is specified on the command
line, by disabling them one at a time, the counter never gets to
zero, and the raw_syscall is not disabled and enabled, keeping the
syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will
ensure the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables
protected by RCU (preemption disabled). Now that tracepoint callbacks
are called with preemption enabled, this protection needs to be added
explicitly, and not depend on the functions being called with
preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY.
But this does not prevent the application from calling
madvise(MADVISE_DOFORK). This causes the mapping to be copied on
fork. After the first tasks exits, the mapping is considered unmapped
by everyone. But when he second task exits, the counter goes below
zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace
ring buffer (although two mappings may mess each other up), there's
no reason to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get
all *ftrace* files.
* tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MAINTAINERS entries for all ftrace headers
tracing: Fix WARN_ON in tracing_buffers_mmap_close
tracing: Disable preemption in the tracepoint callbacks handling filtered pids
ftrace: Disable preemption in the tracepoint callbacks handling filtered pids
tracing: Fix syscall events activation by ensuring refcount hits zero
fgraph: Fix thresh_return nosleeptime double-adjust
fgraph: Fix thresh_return clear per-task notrace
Larysa Zaremba says:
====================
Address XDP frags having negative tailroom
Aside from the issue described below, tailroom calculation does not account
for pages being split between frags, e.g. in i40e, enetc and
AF_XDP ZC with smaller chunks. These series address the problem by
calculating modulo (skb_frag_off() % rxq->frag_size) in order to get
data offset within a smaller block of memory. Please note, xskxceiver
tail grow test passes without modulo e.g. in xdpdrv mode on i40e,
because there is not enough descriptors to get to flipped buffers.
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case,
but due to tailroom being stored as an unsigned int, it is reported to be
somewhere near UINT_MAX, resulting in a tail being grown, even if the
requested offset is too much(it is around 2K in the abovementioned test).
This later leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/0x6b0
[ 7340.430672] ? __do_sys_clone3+0xd9/0x120
[ 7340.431212] ? switch_fpu_return+0x4e/0xd0
[ 7340.431761] ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0
[ 7340.432498] ? do_syscall_64+0xbb/0x6b0
[ 7340.433015] ? __handle_mm_fault+0x445/0x690
[ 7340.433582] ? count_memcg_events+0xd6/0x210
[ 7340.434151] ? handle_mm_fault+0x212/0x340
[ 7340.434697] ? do_user_addr_fault+0x2b4/0x7b0
[ 7340.435271] ? clear_bhb_loop+0x30/0x80
[ 7340.435788] ? clear_bhb_loop+0x30/0x80
[ 7340.436299] ? clear_bhb_loop+0x30/0x80
[ 7340.436812] ? clear_bhb_loop+0x30/0x80
[ 7340.437323] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 7340.437973] RIP: 0033:0x7f4161b14169
[ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f.
[ 7340.439242] RSP: 002b:00007ffc6ebfa770 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
[ 7340.440173] RAX: fffffffffffffe00 RBX: 00000000000005a1 RCX: 00007f4161b14169
[ 7340.441061] RDX: 00000000000005a1 RSI: 0000000000000109 RDI: 00007f415bfff990
[ 7340.441943] RBP: 00007ffc6ebfa7a0 R08: 0000000000000000 R09: 00000000ffffffff
[ 7340.442824] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 7340.443707] R13: 0000000000000000 R14: 00007f415bfff990 R15: 00007f415bfff6c0
[ 7340.444586] </TASK>
[ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg
[ 7340.449650] ---[ end trace 0000000000000000 ]---
The issue can be fixed in all in-tree drivers, but we cannot just trust OOT
drivers to not do this. Therefore, make tailroom a signed int and produce a
warning when it is negative to prevent such mistakes in the future.
The issue can also be easily reproduced with ice driver, by applying
the following diff to xskxceiver and enjoying a kernel panic in xdpdrv mode:
diff --git a/tools/testing/selftests/bpf/prog_tests/test_xsk.c b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
index 5af28f359cfd..042d587fa7ef 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_xsk.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
@@ -2541,8 +2541,8 @@ int testapp_adjust_tail_grow_mb(struct test_spec *test)
{
test->mtu = MAX_ETH_JUMBO_SIZE;
/* Grow by (frag_size - last_frag_Size) - 1 to stay inside the last fragment */
- return testapp_adjust_tail(test, (XSK_UMEM__MAX_FRAME_SIZE / 2) - 1,
- XSK_UMEM__LARGE_FRAME_SIZE * 2);
+ return testapp_adjust_tail(test, XSK_UMEM__MAX_FRAME_SIZE * 100,
+ 6912);
}
int testapp_tx_queue_consumer(struct test_spec *test)
If we print out the values involved in the tailroom calculation:
tailroom = rxq->frag_size - skb_frag_size(frag) - skb_frag_off(frag);
4294967040 = 3456 - 3456 - 256
I personally reproduced and verified the issue in ice and i40e,
aside from WiP ixgbevf implementation.
====================
Link: https://patch.msgid.link/20260305111253.2317394-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects truesize instead of DMA
write size. Different assumptions in enetc driver configuration lead to
negative tailroom.
Set frag_size to the same value as frame_sz.
Fixes: 2768b2e2f7 ("net: enetc: register XDP RX queues with frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-9-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in idpf driver configuration lead
to negative tailroom.
To make it worse, buffer sizes are not actually uniform in idpf when
splitq is enabled, as there are several buffer queues, so rxq->rx_buf_size
is meaningless in this case.
Use truesize of the first bufq in AF_XDP ZC, as there is only one. Disable
growing tail for regular splitq.
Fixes: ac8a861f63 ("idpf: prepare structures to support XDP")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-8-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in i40e driver configuration lead
to negative tailroom.
Set frag_size to the same value as frame_sz in shared pages mode, use new
helper to set frag_size when AF_XDP ZC is active.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-7-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current way of handling XDP RxQ info in i40e has a problem, where frag_size
is not updated when xsk_buff_pool is detached or when MTU is changed, this
leads to growing tail always failing for multi-buffer packets.
Couple XDP RxQ info registering with buffer allocations and unregistering
with cleaning the ring.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-6-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-5-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP RxQ info contains frag_size, which depends on the MTU. This makes the
old way of registering RxQ info before calculating new buffer sizes
invalid. Currently, it leads to frag_size being outdated, making it
sometimes impossible to grow tailroom in a mbuf packet. E.g. fragments are
actually 3K+, but frag size is still as if MTU was 1500.
Always register new XDP RxQ info after reconfiguring memory pools.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-4-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxq->frag_size is basically a step between consecutive strictly aligned
frames. In ZC mode, chunk size fits exactly, but if chunks are unaligned,
there is no safe way to determine accessible space to grow tailroom.
Report frag_size to be zero, if chunks are unaligned, chunk_size otherwise.
Fixes: 24ea50127e ("xsk: support mbuf on ZC RX")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-3-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current formula for calculating XDP tailroom in mbuf packets works only
if each frag has its own page (if rxq->frag_size is PAGE_SIZE), this
defeats the purpose of the parameter overall and without any indication
leads to negative calculated tailroom on at least half of frags, if shared
pages are used.
There are not many drivers that set rxq->frag_size. Among them:
* i40e and enetc always split page uniformly between frags, use shared
pages
* ice uses page_pool frags via libeth, those are power-of-2 and uniformly
distributed across page
* idpf has variable frag_size with XDP on, so current API is not applicable
* mlx5, mtk and mvneta use PAGE_SIZE or 0 as frag_size for page_pool
As for AF_XDP ZC, only ice, i40e and idpf declare frag_size for it. Modulo
operation yields good results for aligned chunks, they are all power-of-2,
between 2K and PAGE_SIZE. Formula without modulo fails when chunk_size is
2K. Buffers in unaligned mode are not distributed uniformly, so modulo
operation would not work.
To accommodate unaligned buffers, we could define frag_size as
data + tailroom, and hence do not subtract offset when calculating
tailroom, but this would necessitate more changes in the drivers.
Define rxq->frag_size as an even portion of a page that fully belongs to a
single frag. When calculating tailroom, locate the data start within such
portion by performing a modulo operation on page offset.
Fixes: bf25146a55 ("bpf: add frags support to the bpf_xdp_adjust_tail() API")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-2-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 2 test cases to exercise fix in act_ife's internal metalist
behaviour.
- Update decode ife action into encode with tcindex metadata
- Update decode ife action into encode with multiple metadata
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260304140603.76500-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiayuan Chen says:
====================
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop and add selftest
syzbot reported a kernel panic [1] when an IPv4 route references
a loopback IPv6 nexthop object:
BUG: unable to handle page fault for address: ffff8d069e7aa000
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 6aa01067 P4D 6aa01067 PUD 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 2 UID: 0 PID: 530 Comm: ping Not tainted 6.19.0+ #193 PREEMPT
RIP: 0010:ip_route_output_key_hash_rcu+0x578/0x9e0
RSP: 0018:ffffd2ffc1573918 EFLAGS: 00010286
RAX: ffff8d069e7aa000 RBX: ffffd2ffc1573988 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffd2ffc1573978 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d060d496000
R13: 0000000000000000 R14: ffff8d060399a600 R15: ffff8d06019a6ab8
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8d069e7aa000 CR3: 0000000106eb0001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
ip_route_output_key_hash+0x86/0x1a0
__ip4_datagram_connect+0x2b5/0x4e0
udp_connect+0x2c/0x60
inet_dgram_connect+0x88/0xd0
__sys_connect_file+0x56/0x90
__sys_connect+0xa8/0xe0
__x64_sys_connect+0x18/0x30
x64_sys_call+0xfb9/0x26e0
do_syscall_64+0xd3/0x1510
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Reproduction:
ip -6 nexthop add id 100 dev lo
ip route add 172.20.20.0/24 nhid 100
ping -c1 172.20.20.1 # kernel crash
Problem Description
When a standalone IPv6 nexthop object is created with a loopback device,
fib6_nh_init() misclassifies it as a reject route. Nexthop objects have
no destination prefix (fc_dst=::), so fib6_is_reject() always matches
any loopback nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. When an IPv4 route later references
this nexthop and triggers a route lookup, __mkroute_output() calls
raw_cpu_ptr(nhc->nhc_pcpu_rth_output) on a NULL pointer, causing a page
fault.
The reject classification was designed for regular IPv6 routes to prevent
kernel routing loops, but nexthop objects should not be subject to this
check since they carry no destination information. Loop prevention is
handled separately when the route itself is created.
[1] https://syzkaller.appspot.com/bug?extid=334190e097a98a1b81bb
====================
Link: https://patch.msgid.link/20260304113817.294966-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for a kernel panic that occurs when an IPv4 route
references an IPv6 nexthop object created on the loopback device.
The test creates an IPv6 nexthop on lo, binds an IPv4 route to it, then
triggers a route lookup via ping to verify the kernel does not crash.
./fib_nexthops.sh
Tests passed: 249
Tests failed: 0
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Reported-by: syzbot+334190e097a98a1b81bb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698f8482.a70a0220.2c38d7.00ca.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module.
Fixes: e15a00aafa ("vxlan: add ipv6 route short circuit support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260304120357.9778-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. Then, if neigh_suppress is enabled and an ICMPv6
Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will
dereference ipv6_stub->nd_tbl which is NULL, passing it to
neigh_lookup(). This causes a kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000268
Oops: 0000 [#1] PREEMPT SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x16/0xe0
[...]
Call Trace:
<IRQ>
? neigh_lookup+0x16/0xe0
br_do_suppress_nd+0x160/0x290 [bridge]
br_handle_frame_finish+0x500/0x620 [bridge]
br_handle_frame+0x353/0x440 [bridge]
__netif_receive_skb_core.constprop.0+0x298/0x1110
__netif_receive_skb_one_core+0x3d/0xa0
process_backlog+0xa0/0x140
__napi_poll+0x2c/0x170
net_rx_action+0x2c4/0x3a0
handle_softirqs+0xd0/0x270
do_softirq+0x3f/0x60
Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in
the callers. This is in essence disabling NS/NA suppression when IPv6 is
disabled.
Fixes: ed842faeb2 ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Reported-by: Guruprasad C P <gurucp2005@gmail.com>
Closes: https://lore.kernel.org/netdev/CAHXs0ORzd62QOG-Fttqa2Cx_A_VFp=utE2H2VTX5nqfgs7LDxQ@mail.gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260304120357.9778-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
MAINTAINERS: annual cleanup of inactive maintainers
Annual cleanup of inactive maintainers under networking.
The goal is to make sure MAINTAINERS reflect reality for
code which is relatively actively changed (at least 70 commits
in the last 2 years or at least 120 commits in the last 5 years).
Those who either:
- were the initial author / "upstreamer" of the driver; or
- authored at least 1/3rd of the exiting code base (per git blame); or
- authored at least 25% of commits before becoming inactive
are moved to CREDITS.
The discovery of inactive maintainers was done using gitdm tools,
with a bunch of ad-hoc scripts on top to do the rest. I tried to
double check the results but this is mostly a scripted cleanup
so please report inaccuracies if any.
====================
Link: https://patch.msgid.link/20260303215339.2333548-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen emails or tags from Thomas's IBM address
(tlfalcon@linux.ibm.com) in over 5 years. Looks like Thomas
is active in perf tooling at Intel (thomas.falcon@intel.com).
Subsystem IBM Power SRIOV Virtual NIC Device Driver
Changes 49 / 134 (36%)
Last activity: 2025-08-26
Haren Myneni <haren@linux.ibm.com>:
Tags 3c14917953 2025-08-26 00:00:00 2
Rick Lindsley <ricklind@linux.ibm.com>:
Nick Child <nnac123@linux.ibm.com>:
Author d93a6caab5 2025-03-25 00:00:00 14
Tags d93a6caab5 2025-03-25 00:00:00 16
Thomas Falcon <tlfalcon@linux.ibm.com>:
Top reviewers:
[22]: drt@linux.ibm.com
[13]: horms@kernel.org
[9]: ricklind@linux.vnet.ibm.com
[3]: davemarq@linux.ibm.com
INACTIVE MAINTAINER Thomas Falcon <tlfalcon@linux.ibm.com>
Move Thomas to CREDITS as the initial author of ibmvnic.
Acked-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://patch.msgid.link/20260303215339.2333548-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen tags from Claudiu for the Ocelot switch driver
in over 5 years. He is active upstream in other NXP subsystems
(ENETC, gianfar), with 46 emails on lore since 2024.
We have not seen tags from Alexandre for the Ocelot switch driver
in over 5 years. He is very active upstream in other subsystems
(RTC, I3C, Atmel/Microchip SoC), with over 1,200 emails on lore
since 2024.
Vladimir Oltean is active.
Subsystem OCELOT ETHERNET SWITCH DRIVER
Changes 180 / 494 (36%)
Last activity: 2026-02-12
Vladimir Oltean <vladimir.oltean@nxp.com>:
Author c22ba07c82 2026-02-10 00:00:00 33
Tags 026f6513c5 2026-02-12 00:00:00 39
Claudiu Manoil <claudiu.manoil@nxp.com>:
Alexandre Belloni <alexandre.belloni@bootlin.com>:
Top reviewers:
[49]: f.fainelli@gmail.com
[19]: horms@kernel.org
[10]: richardcochran@gmail.com
[9]: jacob.e.keller@intel.com
[8]: colin.foster@in-advantage.com
INACTIVE MAINTAINER Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/20260303215339.2333548-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen emails or tags from Jonathan in over 5 years,
and there is no recent mailing list activity.
Vadim Fedorenko is active.
Subsystem OPENCOMPUTE PTP CLOCK DRIVER
Changes 49 / 130 (37%)
Last activity: 2025-11-25
Jonathan Lemon <jonathan.lemon@gmail.com>:
Vadim Fedorenko <vadim.fedorenko@linux.dev>:
Author d3ca2ef0c9 2025-09-19 00:00:00 5
Tags 648282e2d1 2025-11-25 00:00:00 20
Top reviewers:
[7]: horms@kernel.org
[4]: jiri@nvidia.com
[3]: richardcochran@gmail.com
[2]: aleksandr.loktionov@intel.com
INACTIVE MAINTAINER Jonathan Lemon <jonathan.lemon@gmail.com>
Add Jonathan to CREDITS as the initial author of ptp_ocp.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260303215339.2333548-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen tags from Clark for FEC in over 5 years.
He has some limited recent activity on the mailing list in other
NXP subsystems (stmmac, phy). Wei Fang and Shenwei Wang are active,
with decent review coverage (61%).
Frank Li has been reviewing code actively more recenty, let's
make it official.
Subsystem FREESCALE IMX / MXC FEC DRIVER
Changes 57 / 92 (61%)
Last activity: 2026-02-10
Wei Fang <wei.fang@nxp.com>:
Author 25eb3058eb 2026-02-10 00:00:00 33
Tags 25eb3058eb 2026-02-10 00:00:00 61
Shenwei Wang <shenwei.wang@nxp.com>:
Author d466c16026 2025-09-14 00:00:00 6
Tags d466c16026 2025-09-14 00:00:00 6
Clark Wang <xiaoning.wang@nxp.com>:
Top reviewers:
[23]: Frank.Li@nxp.com
[17]: andrew@lunn.ch
[4]: csokas.bence@prolan.hu
[3]: horms@kernel.org
[2]: maxime.chevallier@bootlin.com
INACTIVE MAINTAINER Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260303215339.2333548-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen tags from DENG Qingfang for the MediaTek
switch driver in over 5 years. He is active upstream with
PPP/PPPoE patches in net-next. Chester and Daniel are active.
Subsystem MEDIATEK SWITCH DRIVER
Changes 26 / 70 (37%)
Last activity: 2025-12-01
Chester A. Unal <chester.a.unal@arinc9.com>:
Tags 585943b7ad 2025-12-01 00:00:00 7
Daniel Golle <daniel@makrotopia.org>:
Author 497041d763 2025-04-23 00:00:00 2
Tags 3b87e60d21 2025-12-01 00:00:00 14
DENG Qingfang <dqfext@gmail.com>:
Sean Wang <sean.wang@mediatek.com>:
Top reviewers:
[4]: andrew@lunn.ch
[4]: florian.fainelli@broadcom.com
[4]: arinc.unal@arinc9.com
[2]: olteanv@gmail.com
INACTIVE MAINTAINER DENG Qingfang <dqfext@gmail.com>
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20260303215339.2333548-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen tags from Sean in over 5 years,
with only one mailing list post since 2024.
Felix and Lorenzo are active for the Ethernet driver,
and Chester, Daniel and DENG Qingfang are active for
the switch driver.
Subsystem MEDIATEK ETHERNET DRIVER
Changes 55 / 113 (48%)
Last activity: 2025-10-12
Felix Fietkau <nbd@nbd.name>:
Author d473673711 2025-09-02 00:00:00 3
Tags d473673711 2025-09-02 00:00:00 4
Sean Wang <sean.wang@mediatek.com>:
Lorenzo Bianconi <lorenzo@kernel.org>:
Author 96326447d4 2025-08-13 00:00:00 35
Tags 3abc0e55ea 2025-10-12 00:00:00 40
Top reviewers:
[26]: horms@kernel.org
[5]: andrew@lunn.ch
[4]: jacob.e.keller@intel.com
[3]: shannon.nelson@amd.com
[3]: michal.swiatkowski@linux.intel.com
INACTIVE MAINTAINER Sean Wang <sean.wang@mediatek.com>
Subsystem MEDIATEK SWITCH DRIVER
Changes 26 / 70 (37%)
Last activity: 2025-12-01
Chester A. Unal <chester.a.unal@arinc9.com>:
Tags 585943b7ad 2025-12-01 00:00:00 7
Daniel Golle <daniel@makrotopia.org>:
Author 497041d763 2025-04-23 00:00:00 2
Tags 3b87e60d21 2025-12-01 00:00:00 14
DENG Qingfang <dqfext@gmail.com>:
Sean Wang <sean.wang@mediatek.com>:
Top reviewers:
[4]: andrew@lunn.ch
[4]: florian.fainelli@broadcom.com
[4]: arinc.unal@arinc9.com
[2]: olteanv@gmail.com
INACTIVE MAINTAINER Sean Wang <sean.wang@mediatek.com>
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20260303215339.2333548-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen emails or tags from Johan in over 5 years,
and there is no recent mailing list activity.
Marcel Holtmann hasn't provided any tags in the Bluetooth
subsystem in over 5 years, but he is active on the Bluetooth
mailing list, providing informal review.
Luiz Augusto von Dentz is very active, handling essentially
all commits and reviews (12% coverage, but Luiz is the sole
active committer).
Subsystem BLUETOOTH SUBSYSTEM
Changes 50 / 411 (12%)
Last activity: 2026-02-23
Marcel Holtmann <marcel@holtmann.org>:
Johan Hedberg <johan.hedberg@gmail.com>:
Luiz Augusto von Dentz <luiz.dentz@gmail.com>:
Author 138d7eca44 2026-02-23 00:00:00 164
Committer 138d7eca44 2026-02-23 00:00:00 361
Tags 138d7eca44 2026-02-23 00:00:00 362
Top reviewers:
[15]: pmenzel@molgen.mpg.de
[8]: keescook@chromium.org
[5]: willemb@google.com
[4]: horms@kernel.org
[3]: kuniyu@amazon.com
[3]: luiz.von.dentz@intel.com
INACTIVE MAINTAINER Johan Hedberg <johan.hedberg@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Link: https://patch.msgid.link/20260303215339.2333548-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tun UDP tunnel GSO fixture contains XFAIL-marked variants intended to
exercise failure paths (e.g. EMSGSIZE / "Message too long").
Using ASSERT_EQ() in these tests aborts the subtest, which prevents the
harness from classifying them as XFAIL and can make the overall net: tun
test fail.
Switch the relevant ASSERT_EQ() checks to EXPECT_EQ() so the subtests
continue running and the failures are correctly reported and accounted
as XFAIL where applicable.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-2-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TEST_F() allocates and registers its struct __test_metadata via mmap()
inside its constructor, and only then assigns the
_##fixture_##test##_object pointer.
XFAIL_ADD() runs in a constructor too and reads
_##fixture_##test##_object to initialize xfail->test. If XFAIL_ADD runs
first, xfail->test can be NULL and the expected failure will be reported
as FAIL.
Use constructor priorities to ensure TEST_F registration runs before
XFAIL_ADD, without adding extra state or runtime lookups.
Fixes: 2709473c93 ("selftests: kselftest_harness: support using xfail")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-1-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3hB9
-----END PGP SIGNATURE-----
Merge tag 'nf-26-03-05' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
1) Inseo An reported a bug with the set element handling in nf_tables:
When set cannot accept more elements, we unlink and immediately free
an element that was inserted into a public data structure, freeing it
without waiting for RCU grace period. Fix this by doing the
increment earlier and by deferring possible unlink-and-free to the
existing abort path, which performs the needed synchronize_rcu before
free. From Pablo Neira Ayuso. This is an ancient bug, dating back to
kernel 4.10.
2) syzbot reported WARN_ON() splat in nf_tables that occurs on memory
allocation failure. Fix this by a new iterator annotation:
The affected walker does not need to clone the data structure and
can just use the live version if no clone exists yet.
Also from Pablo. This bug existed since 6.10 days.
3) Ancient forever bug in nft_pipapo data structure:
The garbage collection logic to remove expired elements is broken.
We must unlink from data structure and can only hand the freeing
to call_rcu after the clone/live pointers of the data structures
have been swapped. Else, readers can observe the free'd element.
Reported by Yiming Qian.
* tag 'nf-26-03-05' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
netfilter: nf_tables: clone set on flush only
netfilter: nf_tables: unconditionally bump set->nelems before insertion
====================
Link: https://patch.msgid.link/20260305122635.23525-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report device_stall_critical_watermark_cnt as tx_pause_storm_events in
the ethtool_pause_stats struct. This counter tracks pause storm error
events which indicate the NIC has been sending pause frames for an
extended period due to a stall.
The ethtool_pause_stats struct reports these stalls as a single value,
whereas the device supports tracking them per priority. Aggregate the
counter across all priority classes to capture stalls on all priorities.
Note that the stats are fetched from the device for each priority via
mlx5_core_access_reg().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260302230149.1580195-6-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With pause storm protection in place, track the occurrence of pause
storm events. Since there is a one-to-one mapping between pause storm
interrupts and events, use the interrupt count to track this metric.
./ethtool -I -a eth0
Pause parameters for eth0:
Autonegotiate: off
RX: off
TX: on
Statistics:
tx_pause_frames: 759657
rx_pause_frames: 0
tx_pause_storm_events: 219
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260302230149.1580195-5-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add protection against TX pause storms. A pause storm occurs when a
device fails to send received packets up to the stack. When a pause
storm is detected (pause state persists beyond the configured timeout),
the device stops sending the pause frames and begins dropping packets
instead of back-pressuring.
The timeout is configurable via ethtool tunable (pfc-prevention-tout)
with a maximum value of 10485ms, and the default value of 500ms.
Once the device transitions to the storm-detected state, the service
task periodically attempts recovery, returning the device to normal
operation to handle any subsequent pause storm episodes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260302230149.1580195-4-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ETHTOOL_PFC_PREVENTION_TOUT enables the configuration of timeout value
for PFC storm prevention. This can also be used to configure storm
detection timeout for global pause settings. In fact some existing
drivers are already using it for the said purpose.
Highlight that the knob can formally be used to configure timeout
value for pause storm prevention mechanism. The update to the ethtool
man page will follow afterwards.
Link: https://lore.kernel.org/aa5f189a-ac62-4633-97b5-ebf939e9c535@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260302230149.1580195-3-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With TX pause enabled, if a device is unable to pass packets up to the
stack (e.g., CPU is hanged), the device can cause pause storm. Given
that devices can have native support to protect the neighbor from such
flooding, such events need some tracking. This support is to track TX
pause storm events for better observability.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260302230149.1580195-2-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is currently no entry for ftrace_irq.h and ftrace_regs.h. Add a
generic entry for all *ftrace* headers to include them and prevent
overlooking future ftrace headers.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260305093117.853700-1-jmarchan@redhat.com
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Ankit Garg says:
====================
gve: optimize and enable HW GRO for DQO
The DQO device has always performed HW GRO, not LRO. This series updates
the feature bit and modifies the RX path to enhance support. It sets
gso_segs correctly so the software stack can continue coalescing, and
pulls network headers into the skb linear space to avoid multiple small
memory copies when header-split is disabled.
We also enable HW GRO by default on supported devices.
====================
Link: https://patch.msgid.link/20260303195549.2679070-1-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change the driver's default behavior to enable hw-gro whenever supported
for device.
Performance observations:
- We observed ~10% improvement in RX single stream throughput across
various MTU sizes.
- No change in TCP_RR/TCP_CRR latencies
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20260303195549.2679070-5-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
