Sometimes VMs will have some intermittent dmesg warnings that are
unrelated to vsock. Change the dmesg parsing to filter on strings
containing 'vsock' to avoid false positive failures that are unrelated
to vsock. The downside is that it is possible for some vsock related
warnings to not contain the substring 'vsock', so those will be missed.
Fixes: a4a65c6fe0 ("selftests/vsock: add initial vmtest.sh for vsock")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251105-vsock-vmtest-dmesg-fix-v2-1-1a042a14892c@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov says:
====================
net: bridge: fix two MST bugs
Patch 01 fixes a race condition that exists between expired fdb deletion
and port deletion when MST is enabled. Learning can happen after the
port's state has been changed to disabled which could lead to that
port's memory being used after it's been freed. The issue was reported
by syzbot, more information in patch 01. Patch 02 fixes an issue with
MST's static key which Ido spotted, we can have multiple bridges with MST
and a single bridge can erroneously disable it for all.
====================
Link: https://patch.msgid.link/20251105111919.1499702-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported[1] a use-after-free when deleting an expired fdb. It is
due to a race condition between learning still happening and a port being
deleted, after all its fdbs have been flushed. The port's state has been
toggled to disabled so no learning should happen at that time, but if we
have MST enabled, it will bypass the port's state, that together with VLAN
filtering disabled can lead to fdb learning at a time when it shouldn't
happen while the port is being deleted. VLAN filtering must be disabled
because we flush the port VLANs when it's being deleted which will stop
learning. This fix adds a check for the port's vlan group which is
initialized to NULL when the port is getting deleted, that avoids the port
state bypass. When MST is enabled there would be a minimal new overhead
in the fast-path because the port's vlan group pointer is cache-hot.
[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be
Fixes: ec7328b591 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Reported-by: syzbot+dd280197f0f7ab3917be@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69088ffa.050a0220.29fc44.003d.GAE@google.com/
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251105111919.1499702-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following warning was seen when we try to connect using ssh to the device.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 104, name: dropbear
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
CPU: 0 UID: 0 PID: 104 Comm: dropbear Tainted: G W 6.18.0-rc2-00399-g6f1ab1b109b9-dirty #530 NONE
Tainted: [W]=WARN
Hardware name: Generic DT based system
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x7c/0xac
dump_stack_lvl from __might_resched+0x16c/0x2b0
__might_resched from __mutex_lock+0x64/0xd34
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from lan966x_stats_get+0x5c/0x558
lan966x_stats_get from dev_get_stats+0x40/0x43c
dev_get_stats from dev_seq_printf_stats+0x3c/0x184
dev_seq_printf_stats from dev_seq_show+0x10/0x30
dev_seq_show from seq_read_iter+0x350/0x4ec
seq_read_iter from seq_read+0xfc/0x194
seq_read from proc_reg_read+0xac/0x100
proc_reg_read from vfs_read+0xb0/0x2b0
vfs_read from ksys_read+0x6c/0xec
ksys_read from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b11fa8 to 0xf0b11ff0)
1fa0: 00000001 00001000 00000008 be9048d8 00001000 00000001
1fc0: 00000001 00001000 00000008 00000003 be905920 0000001e 00000000 00000001
1fe0: 0005404c be9048c0 00018684 b6ec2cd8
It seems that we are using a mutex in a atomic context which is wrong.
Change the mutex with a spinlock.
Fixes: 12c2d0a5b8 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251105074955.1766792-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Liang reported an issue where setting a slave’s actor_port_prio to
predefined values such as 0, 255, or 65535 would cause a system crash.
The problem occurs because in bond_opt_parse(), when the provided value
matches a predefined table entry, the function returns that table entry,
which does not contain slave information. Later, in
bond_option_actor_port_prio_set(), calling bond_slave_get_rtnl() leads
to a NULL pointer dereference.
Since actor_port_prio is defined as a u16 and initialized to the default
value of 255 in ad_initialize_port(), there is no need for the
bond_actor_port_prio_tbl. Using the BOND_OPTFLAG_RAWVAL flag is sufficient.
Fixes: 6b6dc81ee7 ("bonding: add support for per-port LACP actor priority")
Reported-by: Liang Li <liali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251105072620.164841-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KSZ9477/KSZ9897 and LAN937X families of switches use a reserved multicast
address table for some specific forwarding with some multicast addresses,
like the one used in STP. The hardware assumes the host port is the last
port in KSZ9897 family and port 5 in LAN937X family. Most of the time
this assumption is correct but not in other cases like KSZ9477.
Originally the function just setups the first entry, but the others still
need update, especially for one common multicast address that is used by
PTP operation.
LAN937x also uses different register bits when accessing the reserved
table.
Fixes: 457c182af5 ("net: dsa: microchip: generic access to ksz9477 static and reserved table")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Łukasz Majewski <lukma@nabladev.com>
Link: https://patch.msgid.link/20251105033741.6455-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- ath12k: revert a change that caused performance regressions
- hwsim: don't ignore netns on netlink socket matching
-----BEGIN PGP SIGNATURE-----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=zUoa
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-11-05' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just two small fixes:
- ath12k: revert a change that caused performance regressions
- hwsim: don't ignore netns on netlink socket matching
* tag 'wireless-2025-11-05' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
Revert "wifi: ath12k: Fix missing station power save configuration"
====================
Link: https://patch.msgid.link/20251105152827.53254-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver calls mfd_add_devices() but fails to call mfd_remove_devices()
in error paths after successful MFD device registration and in the remove
function. This leads to resource leaks where MFD child devices are not
properly unregistered.
Replace mfd_add_devices with devm_mfd_add_devices to automatically
manage the device resources.
Fixes: c96e976d9a ("net: wan: framer: Add support for the Lantiq PEF2256 framer")
Suggested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20251105034716.662-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The device bus LAN ID was obtained from PCI_FUNC(), but when a PF
port is passthrough to a virtual machine, the function number may not
match the actual port index on the device. This could cause the driver
to perform operations such as LAN reset on the wrong port.
Fix this by reading the LAN ID from port status register.
Fixes: a34b3e6ed8 ("net: txgbe: Store PCI info")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/B60A670C1F52CB8E+20251104062321.40059-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5e: SHAMPO fixes for 64KB page size
This series by Dragos contains fixes for HW-GRO issues found on systems
with 64KB page size.
====================
Link: https://patch.msgid.link/1762238915-1027590-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MLX5E_SHAMPO_WQ_HEADER_PER_PAGE and
MLX5E_SHAMPO_LOG_MAX_HEADER_ENTRY_SIZE macros are used directly in
several places under the assumption that there will always be more
headers per WQE than headers per page. However, this assumption doesn't
hold for 64K page sizes and higher MTUs (> 4K). This can be first
observed during header page allocation: ksm_entries will become 0 during
alignment to MLX5E_SHAMPO_WQ_HEADER_PER_PAGE.
This patch introduces 2 additional members to the mlx5e_shampo_hd struct
which are meant to be used instead of the macrose mentioned above.
When the number of headers per WQE goes below
MLX5E_SHAMPO_WQ_HEADER_PER_PAGE, clamp the number of headers per
page and expand the header size accordingly so that the headers
for one WQE cover a full page.
All the formulas are adapted to use these two new members.
Fixes: 945ca432bf ("net/mlx5e: SHAMPO, Drop info array")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_hw_gro_skb_has_enough_space() uses a formula to check if there is
enough space in the skb frags to store more data. This formula is
incorrect for 64K page sizes and it triggers early GRO session
termination because the first fragment will blow up beyond
GRO_LEGACY_MAX_SIZE.
This patch adds a special case for page sizes >= GRO_LEGACY_MAX_SIZE
(64K) which uses the skb->len instead. Within this context,
the check is safe from fragment overflow because the hardware
will continuously fill the data up to the reservation size of 64K
and the driver will coalesce all data from the same page to the same
fragment. This means that the data will span one fragment or at most
two for such a large page size.
It is expected that the if statement will be optimized out as the
check is done with constants.
Fixes: 92552d3abd ("net/mlx5e: HW_GRO cqe handler implementation")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HW-GRO is broken on mlx5 for 64K page sizes. The patch in the fixes tag
didn't take into account larger page sizes when doing an align down
of max_ksm_entries. For 64K page size, max_ksm_entries is 0 which will skip
mapping header pages via WQE UMR. This breaks header-data split
and will result in the following syndrome:
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x4c9, ci 0x0, qn 0x1133, opcode 0xe, syndrome 0x4, vendor syndrome 0x32
00000000: 00 00 00 00 04 4a 00 00 00 00 00 00 20 00 93 32
00000010: 55 00 00 00 fb cc 00 00 00 00 00 00 07 18 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a
00000030: 00 00 3b c7 93 01 32 04 00 00 00 00 00 00 bf e0
mlx5_core 0000:00:08.0 eth2: ERR CQE on RQ: 0x1133
Furthermore, the function that fills in WQE UMRs for the headers
(mlx5e_build_shampo_hd_umr()) only supports mapping page sizes that
fit in a single UMR WQE.
This patch goes back to the old non-aligned max_ksm_entries value and it
changes mlx5e_build_shampo_hd_umr() to support mapping a large page over
multiple UMR WQEs.
This means that mlx5e_build_shampo_hd_umr() can now leave a page only
partially mapped. The caller, mlx5e_alloc_rx_hd_mpwqe(), ensures that
there are enough UMR WQEs to cover complete pages by working on
ksm_entries that are multiples of MLX5E_SHAMPO_WQ_HEADER_PER_PAGE.
Fixes: 8a0ee54027 ("net/mlx5e: SHAMPO, Simplify UMR allocation for headers")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ICSSG driver does the initial FDB configuration which
includes setting the control registers. Other run time
management like learning is managed by the PRU's. The default
FDB hash size used by the firmware is 512 slots, which is
currently missing in the current driver. Update the driver
FDB config to include FDB hash size as well.
Please refer trm [1] 6.4.14.12.17 section on how the FDB config
register gets configured. From the table 6-1404, there is a reset
field for FDB_HAS_SIZE which is 4, meaning 1024 slots. Currently
the driver is not updating this reset value from 4(1024 slots) to
3(512 slots). This patch fixes this by updating the reset value
to 512 slots.
[1]: https://www.ti.com/lit/pdf/spruim2
Fixes: abd5576b9c ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251104104415.3110537-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One GRO-cell device's NAPI callback can nest into the GRO-cell of
another device if the underlying device is also using GRO-cell.
This is the case for IPsec over vxlan.
These two GRO-cells are separate devices. From lockdep's point of view
it is the same because each device is sharing the same lock class and so
it reports a possible deadlock assuming one device is nesting into
itself.
Hold the bh_lock only while accessing gro_cell::napi_skbs in
gro_cell_poll(). This reduces the locking scope and avoids acquiring the
same lock class multiple times.
Fixes: 25718fdcbd ("net: gro_cells: Use nested-BH locking for gro_cell")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/all/66664116-edb8-48dc-ad72-d5223696dd19@nvidia.com/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20251104153435.ty88xDQt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LIBIE_FWLOG is unusable without DEBUG_FS. Mark it in Kconfig.
Fix build error on ixgbe when DEBUG_FS is not set. To not add another
layer of #if IS_ENABLED(LIBIE_FWLOG) in ixgbe fwlog code define debugfs
dentry even when DEBUG_FS isn't enabled. In this case the dummy
functions of LIBIE_FWLOG will be used, so not initialized dentry isn't a
problem.
Fixes: 641585bc97 ("ixgbe: fwlog support for e610")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/f594c621-f9e1-49f2-af31-23fbcb176058@roeck-us.net/
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251104172333.752445-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert an ath12k change which resulted in a significance performance
impact on WCN7850.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaQjAlgAKCRAsFbugiYzL
e1g/AP0VjhhuC5zzElFTNf+5HTgNnXAvs6ghg2BUPkJug+X6xAD9GnKdlrqoo4qw
iGex7lkBnIzPn+fTlF0xPHFDvF0cgww=
=b8DL
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20251103' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.18-rc5
Revert an ath12k change which resulted in a significance performance
impact on WCN7850.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
hwsim radios marked destroy_on_close are removed when the Netlink socket
that created them is closed. As the portid is not unique across network
namespaces, closing a socket in one namespace may remove radios in another
if it has the destroy_on_close flag set.
Instead of matching the network namespace, match the netgroup of the radio
to limit radio removal to those that have been created by the closing
Netlink socket. The netgroup of a radio identifies the network namespace
it was created in, and matching on it removes a destroy_on_close radio
even if it has been moved to another namespace.
Fixes: 100cb9ff40 ("mac80211_hwsim: Allow managing radios from non-initial namespaces")
Signed-off-by: Martin Willi <martin@strongswan.org>
Link: https://patch.msgid.link/20251103082436.30483-1-martin@strongswan.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix a AA deadlock in refill_skbs() where memory allocation while holding
skb_pool->lock can trigger a recursive lock acquisition attempt.
The deadlock scenario occurs when the system is under severe memory
pressure:
1. refill_skbs() acquires skb_pool->lock (spinlock)
2. alloc_skb() is called while holding the lock
3. Memory allocator fails and calls slab_out_of_memory()
4. This triggers printk() for the OOM warning
5. The console output path calls netpoll_send_udp()
6. netpoll_send_udp() attempts to acquire the same skb_pool->lock
7. Deadlock: the lock is already held by the same CPU
Call stack:
refill_skbs()
spin_lock_irqsave(&skb_pool->lock) <- lock acquired
__alloc_skb()
kmem_cache_alloc_node_noprof()
slab_out_of_memory()
printk()
console_flush_all()
netpoll_send_udp()
skb_dequeue()
spin_lock_irqsave(&skb_pool->lock) <- deadlock attempt
This bug was exposed by commit 248f6571fd ("netpoll: Optimize skb
refilling on critical path") which removed refill_skbs() from the
critical path (where nested printk was being deferred), letting nested
printk being called from inside refill_skbs()
Refactor refill_skbs() to never allocate memory while holding
the spinlock.
Another possible solution to fix this problem is protecting the
refill_skbs() from nested printks, basically calling
printk_deferred_{enter,exit}() in refill_skbs(), then, any nested
pr_warn() would be deferred.
I prefer this approach, given I _think_ it might be a good idea to move
the alloc_skb() from GFP_ATOMIC to GFP_KERNEL in the future, so, having
the alloc_skb() outside of the lock will be necessary step.
There is a possible TOCTOU issue when checking for the pool length, and
queueing the new allocated skb, but, this is not an issue, given that
an extra SKB in the pool is harmless and it will be eventually used.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: 248f6571fd ("netpoll: Optimize skb refilling on critical path")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251103-fix_netpoll_aa-v4-1-4cfecdf6da7c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make knav_dma_open_channel consistently return NULL on error instead
of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h
returns NULL when the driver is disabled, but the driver
implementation does not even return NULL or ERR_PTR on failure,
causing inconsistency in the users. This results in a crash in
netcp_free_navigator_resources as followed (trimmed):
Unhandled fault: alignment exception (0x221) at 0xfffffff2
[fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000
Internal error: : 221 [#1] SMP ARM
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE
Hardware name: Keystone
PC is at knav_dma_close_channel+0x30/0x19c
LR is at netcp_free_navigator_resources+0x2c/0x28c
[... TRIM...]
Call trace:
knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c
netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c
netcp_ndo_open from __dev_open+0x114/0x29c
__dev_open from __dev_change_flags+0x190/0x208
__dev_change_flags from netif_change_flags+0x1c/0x58
netif_change_flags from dev_change_flags+0x38/0xa0
dev_change_flags from ip_auto_config+0x2c4/0x11f0
ip_auto_config from do_one_initcall+0x58/0x200
do_one_initcall from kernel_init_freeable+0x1cc/0x238
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x38
[... TRIM...]
Standardize the error handling by making the function return NULL on
all error conditions. The API is used in just the netcp_core.c so the
impact is limited.
Note, this change, in effect reverts commit 5b6cb43b4d ("net:
ethernet: ti: netcp_core: return error while dma channel open issue"),
but provides a less error prone implementation.
Suggested-by: Simon Horman <horms@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251103162811.3730055-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 4959aebba8 ("virtio-net: use mtu size as buffer length
for big packets"), when guest gso is off, the allocated size for big
packets is not MAX_SKB_FRAGS * PAGE_SIZE anymore but depends on
negotiated MTU. The number of allocated frags for big packets is stored
in vi->big_packets_num_skbfrags.
Because the host announced buffer length can be malicious (e.g. the host
vhost_net driver's get_rx_bufs is modified to announce incorrect
length), we need a check in virtio_net receive path. Currently, the
check is not adapted to the new change which can lead to NULL page
pointer dereference in the below while loop when receiving length that
is larger than the allocated one.
This commit fixes the received length check corresponding to the new
change.
Fixes: 4959aebba8 ("virtio-net: use mtu size as buffer length for big packets")
Cc: stable@vger.kernel.org
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251030144438.7582-1-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Bug fixes
Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver
coredump feature recently added in 6.13. Patch #1 adds the necessary
call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes
a possible null pointer derefernce when using early versions of the FW
with this feature. Patch #4 adds the coredump header information
unconditionally to make it more robust.
Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5
eliminates a dmesg warning when doing devlink reload.
====================
Link: https://patch.msgid.link/20251104005700.542174-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing code calls bnxt_cancel_reservations() after
bnxt_hwrm_func_drv_unrgtr() in bnxt_dl_reload_down().
bnxt_cancel_reservations() calls the FW and it will always fail since
the driver has already unregistered, triggering this warning:
bnxt_en 0000:0a:00.0 ens2np0: resc_qcaps failed
Fix it by calling bnxt_clear_reservations() which will skip the
unnecessary FW call since we have unregistered.
Fixes: 228ea8c187 ("bnxt_en: implement devlink dev reload driver_reinit")
Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shantiprasad Shettar <shantiprasad.shettar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While populating firmware host logging segments for the coredump, it is
possible for the FW command that flushes the segment to fail. When that
happens, the existing code will not update the max entry and entry size
in the segment header and this causes software that decodes the coredump
to skip the segment.
The segment most likely has already collected some DMA data, so always
update these 2 segment fields in the header to allow the decoder to
decode any data in the segment.
Fixes: 3c2179e663 ("bnxt_en: Add FW trace coredump segments to the coredump")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER
for FW trace data type that has not been initialized. This will result
in a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for a
valid magic_byte pointer before proceeding.
Fixes: 84fcd9449f ("bnxt_en: Manage the FW trace context memory")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Gautam R A <gautam-r.a@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_ptp_init(), when ptp_clock_register() fails, the driver is
not freeing the memory allocated for ptp_info->pin_config. Fix it
to unconditionally free ptp_info->pin_config in bnxt_ptp_free().
Fixes: caf3eedbcd ("bnxt_en: 1PPS support for 5750X family chips")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netif_close() call in bnxt_shutdown() only stops packet DMA. There
may be FW DMA for trace logging (recently added) that will continue. If
we kexec to a new kernel, the DMA will corrupt memory in the new kernel.
Add bnxt_hwrm_func_drv_unrgtr() to unregister the driver from the FW.
This will stop the FW DMA. In case the call fails, call pcie_flr() to
reset the function and stop the DMA.
Fixes: 24d694aec1 ("bnxt_en: Allocate backing store memory for FW trace logs")
Reported-by: Jakub Kicinski <kicinski@meta.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes: 56a06bd40f ("virtio_net: enable gso over UDP tunnel support.")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251031060551.126-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raw IP packets have no MAC header, leaving skb->mac_header uninitialized.
This can trigger kernel panics on ARM64 when xfrm or other subsystems
access the offset due to strict alignment checks.
Initialize the MAC header to prevent such crashes.
This can trigger kernel panics on ARM when running IPsec over the
qmimux0 interface.
Example trace:
Internal error: Oops: 000000009600004f [#1] SMP
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1
Hardware name: LS1028A RDB Board (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : xfrm_input+0xde8/0x1318
lr : xfrm_input+0x61c/0x1318
sp : ffff800080003b20
Call trace:
xfrm_input+0xde8/0x1318
xfrm6_rcv+0x38/0x44
xfrm6_esp_rcv+0x48/0xa8
ip6_protocol_deliver_rcu+0x94/0x4b0
ip6_input_finish+0x44/0x70
ip6_input+0x44/0xc0
ipv6_rcv+0x6c/0x114
__netif_receive_skb_one_core+0x5c/0x8c
__netif_receive_skb+0x18/0x60
process_backlog+0x78/0x17c
__napi_poll+0x38/0x180
net_rx_action+0x168/0x2f0
Fixes: c6adf77953 ("net: usb: qmi_wwan: add qmap mux protocol support")
Signed-off-by: Qendrim Maxhuni <qendrim.maxhuni@garderos.com>
Link: https://patch.msgid.link/20251029075744.105113-1-qendrim.maxhuni@garderos.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_transport_init() is static and never returns NULL. It is only
called by sctp_transport_new(), so change it to void and remove the
redundant return value check.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251103023619.1025622-1-hehuiwen@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, emac_set_pauseparam() will oops if userspace calls it while
the interface is not up, because phydev is NULL, but it is still
accessed in emac_set_fc() and emac_set_fc_autoneg().
Check for netif_running(dev) in emac_set_pauseparam() before proceeding.
Fixes: bfec6d7f20 ("net: spacemit: Add K1 Ethernet MAC")
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251103-k1-ethernet-remove-fc-v3-1-2083770cd282@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devm_kcalloc() function never return error pointers, it returns NULL
on failure. Also delete the netdev_err() printk. These allocation
functions already have debug output built-in some the extra error message
is not required.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aQYKkrGA12REb2sj@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TSO path called ionic_tx_map_skb() before preparing the TCP pseudo
checksum (ionic_tx_tcp_[inner_]pseudo_csum()), which may perform
skb_cow_head() and might modifies bytes in the linear header area.
Mapping first and then mutating the header risks:
- Using a stale DMA address if skb_cow_head() relocates the head, and/or
- Device reading stale header bytes on weakly-ordered systems
(CPU writes after mapping are not guaranteed visible without an
explicit dma_sync_single_for_device()).
Reorder the TX path to perform all header mutations (including
skb_cow_head()) *before* DMA mapping. Mapping is now done only after the
skb layout and header contents are final. This removes the need for any
post-mapping dma_sync and prevents on-wire corruption observed under
VLAN+TSO load after repeated runs.
This change is purely an ordering fix; no functional behavior change
otherwise.
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20251031155203.203031-2-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TX path currently writes descriptors and then immediately writes to
the MMIO doorbell register to notify the NIC. On weakly ordered
architectures, descriptor writes may still be pending in CPU or DMA
write buffers when the doorbell is issued, leading to the device
fetching stale or incomplete descriptors.
Add a dma_wmb() in ionic_txq_post() to ensure all descriptor writes are
visible to the device before the doorbell MMIO write.
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Link: https://patch.msgid.link/20251031155203.203031-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Wiehler says:
====================
Fix SCTP diag locking issues
- Hold RCU read lock while iterating over address list in
inet_diag_msg_sctpaddrs_fill()
- Prevent TOCTOU out-of-bounds write
- Hold sock lock while iterating over address list in sctp_sock_dump_one()
====================
Link: https://patch.msgid.link/20251028161506.3294376-1-stefan.wiehler@nokia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move address list traversal in inet_assoc_attr_size() under the sock
lock to avoid holding the RCU read lock.
Suggested-by: Xin Long <lucien.xin@gmail.com>
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251028161506.3294376-4-stefan.wiehler@nokia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the following path not holding the sock lock,
sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump()
make sure not to exceed bounds in case the address list has grown
between buffer allocation (time-of-check) and write (time-of-use).
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251028161506.3294376-3-stefan.wiehler@nokia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur says:
====================
net: phy: micrel: lan8842 erratas
Add two erratas to the lan8842. The errata document can be found here [1]
The two erratas are:
- module 2 ("Analog front-end not optimized for PHY-side shorted center taps").
- module 7 ("1000BASE-T PMA EEE TX wake timer is non-compliant")
====================
Link: https://patch.msgid.link/20251031121629.814935-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add errata for lan8842. The errata document can be found here [1].
This is fixing the module 7 ("1000BASE-T PMA EEE TX wake timer is
non-compliant")
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/LAN8842-Errata-DS80001172.pdf
Fixes: 5a774b64cd ("net: phy: micrel: Add support for lan8842")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add errata for lan8842. The errata document can be found here [1].
This is fixing the module 2 ("Analog front-end not optimized for
PHY-side shorted center taps").
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/LAN8842-Errata-DS80001172.pdf
Fixes: 5a774b64cd ("net: phy: micrel: Add support for lan8842")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Gorski says:
====================
net: dsa: b53: minor fdb related fixes
While investigating and fixing/implenting proper ARL support for
bcm63xx, I encountered multiple minor issues in the current ARL
implementation:
* The ARL multicast support was not properly enabled for older chips,
and instead a potentially reserved bit was toggled.
* While traversing the ARL table, "Search done" triggered one final
entry which will be invalid for 4 ARL bin chips, and failed to stop
the search on chips with only one result register.
* For chips where we have only one result register, we only traversed at
most half the maximum entries.
I also had a fix for IVL_SVL_SELECT which is only valid for some chips,
but since this would only have an effect for !vlan_enabled, and we
always have that enabled, it isn't really worth fixing (and rather drop
the !vlan_enabled paths).
====================
Link: https://patch.msgid.link/20251102100758.28352-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When iterating over the ARL table we stop at max ARL entries / 2, but
this is only valid if the chip actually returns 2 results at once. For
chips with only one result register we will stop before reaching the end
of the table if it is more than half full.
Fix this by only dividing the maximum results by two if we have a chip
with more than one result register (i.e. those with 4 ARL bins).
Fixes: cd169d799b ("net: dsa: b53: Bound check ARL searches")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The switch clears the ARL_SRCH_STDN bit when the search is done, i.e. it
finished traversing the ARL table.
This means that there will be no valid result, so we should not attempt
to read and process any further entries.
We only ever check the validity of the entries for 4 ARL bin chips, and
only after having passed the first entry to the b53_fdb_copy().
This means that we always pass an invalid entry at the end to the
b53_fdb_copy(). b53_fdb_copy() does check the validity though before
passing on the entry, so it never gets passed on.
On < 4 ARL bin chips, we will even continue reading invalid entries
until we reach the result limit.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the New Control register bit 1 is either reserved, or has a different
function:
Out of Range Error Discard
When enabled, the ingress port discards any frames
if the Length field is between 1500 and 1536
(excluding 1500 and 1536) and with good CRC.
The actual bit for enabling IP multicast is bit 0, which was only
explicitly enabled for BCM5325 so far.
For older switch chips, this bit defaults to 0, so we want to enable it
as well, while newer switch chips default to 1, and their documentation
says "It is illegal to set this bit to zero."
So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit
also for other switch chips. While at it, rename it to (B53_)IP_MC as
that is how it is called in Broadcom code.
Fixes: 63cc54a6f0 ("net: dsa: b53: Fix egress flooding settings")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Gorski says:
====================
net: dsa: b53: fix bcm63xx rgmii user ports with speed < 1g
It seems that the integrated switch in bcm63xx does not support polling
external PHYs for link configuration. While the appropriate registers
seem to exist with expected content, changing them does nothing.
This results in user ports with external PHYs only working in 1000/fd,
and not in other modes, despite linking up.
Fix this by writing the link result into the port state override
register, like we already do for fixed links.
With this, ports with lower speeds can successfully transmit and receive
packets.
This also aligns the behaviour with the old bcm63xx_enetsw driver for
those ports.
====================
Link: https://patch.msgid.link/20251101132807.50419-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM63XX's switch does not support MDIO scanning of external phys, so its
MACs needs to be manually configured for autonegotiated link speeds.
So b53_force_port_config() and b53_force_link() accordingly also when
mode is MLO_AN_PHY for those ports.
Fixes lower speeds than 1000/full on rgmii ports 4 - 7.
This aligns the behaviour with the old bcm63xx_enetsw driver for those
ports.
Fixes: 967dd82ffc ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no guarantee that the port state override registers have their
default values, as not all switches support being reset via register or
have a reset GPIO.
So when forcing port config, we need to make sure to clear all fields,
which we currently do not do for the speed and flow control
configuration. This can cause flow control stay enabled, or in the case
of speed becoming an illegal value, e.g. configured for 1G (0x2), then
setting 100M (0x1), results in 0x3 which is invalid.
For PORT_OVERRIDE_SPEED_2000M we need to make sure to only clear it on
supported chips, as the bit can have different meanings on other chips,
e.g. for BCM5389 this controls scanning PHYs for link/speed
configuration.
Fixes: 5e004460f8 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
