In preparation for NAN needing the link ID allocation, have
the macro not automatically make the ID allocation functions
static so we can remove that later from the link allocation
function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260321192637.cbfd202c255f.I4dd4d4416d30bed35bc7b7caa3de50071906830a@changeid
This is used only in a single place, and the caller always sets
the type to STATION_TYPE_PEER right now. We need to change some
of this for NAN in the future, removing the type argument will
simplify that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.71841a054f16.I1851148e582eb710261740459a46d22720788926@changeid
When a FW dump happens, possibly even because of a reset handshake
timeout, there's no point in attempting to dump again. Since all the
callers of the function outside the transport itself are from the FW
dump infrastructure, just split the internal function and make the
external one not dump on timeout.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.f36ba3893899.I063ccc3a037ae6dabcde61941acb162c4b33f127@changeid
This could be a firmware issue, it didn't send all the responses
quickly enough. There are other potential issues (interrupts not
being delivered, etc.) but the FW debug data will at least give
some better information, and it's not a WARN condition anyway.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.2188e2efbead.I7dc5bd6f581a31ac51d8a854f3b3af4cb980223a@changeid
Prevent potential issues when newer BIOS revisions
are used with firmware that doesn't support them for
PER_PLATFORM_ANT_GAIN_CMD.
Without this check, the driver may attempt to use
BIOS configurations that are incompatible with the
current firmware version, leading to dropping of
command in firmware without any failure notification
to driver.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.79bf2bf398d0.I8161dbe1a04af3738e00ab0fc13fe3dbfa9094ec@changeid
Check with IWL_FW_CHECK that the FW doesn't send a channel that we don't
support. Otherwise, the center frequency will be 0, leading to a
warning since is_valid_reg_rule will return false, of course.
Although the warning is verbose enough, the IWL_FW_CHECK will spare some
of the debug.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.0e83cdd88cea.Ic86852e622ed3ec06110f9e6525f72679236cf1e@changeid
Implement CQM RSSI threshold handling by tracking the last reported RSSI
and issuing CQM low/high events when the RSSI crosses the configured
threshold with the required hysteresis. This provides proper CQM support
and enables userspace to receive per-link RSSI notifications.
Signed-off-by: Avinash Bhatt <avinash.bhatt@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.08697e34bf66.Ic1a68537ef0d37be62c73c138efe9c5cf09bd24c@changeid
Extract the PER_PLATFORM_ANT_GAIN_CMD command ID into a local variable
to avoid duplicating WIDE_ID(PHY_OPS_GROUP, PER_PLATFORM_ANT_GAIN_CMD).
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.7b7e6315e2cc.Icffcc47ac1e876708b6219a89fd546a018797d44@changeid
Add support for newer firmware API versions that support
multiple BIOS revisions. Use the new TLV provided by
firmware to determine which BIOS revision it supports.
Future patches will use this information to either
drop commands when the BIOS revision is higher than
supported or convert commands based on the command
specific implementation.
Since we are including now nvm-reg.h in img.h, this causes a
re-definition error of IWL_NUM_CHANNELS which is also defined in
eeprom.c, so rename IWL_NUM_CHANNELS to IWL_NUM_CHANNELS_V2
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.76c8a9589ea0.I7f9157115de702e07511f2c3ed5fcb9ae4c667aa@changeid
While the interface isn't really operating, which is already
required by mac80211, we can simply remove the MAC and add
it again to change the type. Implement this simple handling.
We could almost consider moving this to mac80211 itself, as
this kind of flow should be supportable by any device, but
for now keep it here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.2fb530f9d825.I7cc68fa36e40c9f3bef3be9c2982061cb9ea2300@changeid
Tell the firmware if UHR is supported, including ELR (enhanced
long range) MCS support.
Note that the spec currently doesn't differentiate between 1.5
and 3 Mbps ELR MCSes, unlike the firmware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.7117009d7c39.If4e8cdc63fdf4c5f14d923a5c59fb7b43df72a67@changeid
This includes support for UNII-9.
Store the source of the WGDS table in the firmware runtime object to be
able to pass the information to the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319204647.eaff31760dd7.Ic7f56fbbe310833723094f965e7ba3f8624d0ef9@changeid
Prefer to use ARRAY_SIZE when we check array-length.
Make sure num_profile isn't bigger than the number of profiles we can
actually store in the firmware runtime object.
Same of the number of bands.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319204647.a398511514ed.Ie4e62e2008f7e117ae7e305967ffadf1a30fc2b1@changeid
We will soon add support for UNII-9 band in the WGDS table. We need to
decouple the UEFI code from the firmware runtime code.
The firmware runtime is just a software object which will need to grow
and UEFI objects need a new revision to grow. Existing systems will keep
the same UEFI objects.
Just like PPAG and SAR, stop using structures to parse the UEFI tables
since the layout depends on the revision.
The support for the new revision will be added in the next patch, for
now, just do the ground work.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319204647.140706e6e91f.I83ca04932bc21aa358119890001e876ced1e1bda@changeid
This introduces support for UNII-9.
After we increased the size of the arrays of the subbands in SAR
structure, we now support the new firmware command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319204647.9cea60b78a1b.Ia91c59829af0dc4d6c351c5b09ce33800c1f9e44@changeid
Those tables now have support for UNII-9 subband.
Refactor iwl_uefi_set_sar_profile to get an array of values that makes
it easier to use when the number of subbands can vary.
Revamp a bit the code that fetches the tables to ask for the smaller
table, then we can check the size of the object that we got and compare
to the expected sizes to determine what revision to expect.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319204647.6948f69e6ae4.Icf990e13de6905c35a8de69f1445f8eb4aa43ee4@changeid
This table has another subband for UNII-9.
Add defines for the sizes of rev4 and rev5 to easily know how much data
to ask from iwl_uefi_get_verified_variable.
In case rev5 doesn't exist, fallback to rev4.
Check that the revision advertised by the fetched table matches the size
that we got.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319204647.b9ebcff37599.I1e8bb9cee5a028ed416b6094c0fdbf9f859c6dd8@changeid
This adds support for UNII9 which requires to add a subband.
Just increase the number of subbands that we need to read.
Replace the usage of the IWL_NUM_SUB_BANDS_VX macros in acpi.h since
those macros are defined in the firmware API and ACPI declarations have
nothing to do the firmware API.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.a5e7f805d0f2.I0e3ee3258b77b339234692ceccf0d25d1e6dd67e@changeid
We need to make sure we don't have a buffer overflow while reading the
PPAG tables from ACPI into the firmware runtime object.
Add an ACPI specific define for the number of chains in order to
decouple the ACPI layout from the other objects.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.451808698662.I91234c8a662608674679ce490b51be792332cd43@changeid
Per Platform Antenna Gain is getting support for UNII-9.
Add a new version of PER_PLATFORM_ANT_GAIN_CMD.
This requires to increase the number of subbands in the firmware runtime
object.
Pass the number of subbands to iwl_bios_print_ppag to avoid printing
invalid values.
Introduce BIOS_PPAG_MAX_SUB_BANDS_NUM to avoid impacting
BIOS_SAR_MAX_SUB_BANDS_NUM which was used until now for PPAG as well.
SAR will get support for the new subband in future patches.
While at it, print the PPAG table as it was read from BIOS.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.2e577236d3c9.I042697a73893d79ef761796354b5d1dd8522f734@changeid
In this version, the link_id becomes a link_mask to support multiple
links that are used to communicate with the station in question.
This is needed for NAN, in which we can communicate on multiple channels
with the same station.
Also add a new STA type - NAN peer.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.382a30bd1b70.Id6271e7eba233a11dc214ed2e07c2b186b167c66@changeid
iwl_fill_ppag_table fills a command that is sent to the firmware. This
command has several versions and handling those different versions is
the responsibility of the op_mode.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.1f9b38ff7d22.I5c7482c074d63cd18533ac83289cc0b26c1be3d2@changeid
The structure in firmware runtime will need to grow because we're adding
a subband for UNII-9.
This means that we will soon no longer be able to just memcpy the data
from the UEFI table. The layout of the array will change.
Tediously copy the data byte-byte to make sure things get to the right
place even when we'll increase the number of subbands.
Make it easier for the uefi_cnv_var_ppag structure to grow by
simpiflying the layout it becomes an array of s8.
The layout of the structure becomes less obvious from the structure's
declaration, but then the code is more flexible.
Don't use UEFI_SAR_MAX_SUB_BANDS_NUM for the number of bands for PPAG.
Of course, SAR related structures will grow in future patches, but
decouple SAR and PPAG to make the work easier.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.61e729ea2bde.I9d9cda29f576290bf966f780bf7ad5af34970e6f@changeid
The FW scan logic was extended to support new channels in the
7 GHz band, as such, the scan command was modified to support
scanning more PSC channels.
Introduce scan command version 18 handling, which is different
from scan command version 17 only in the number of supported
channel configurations.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.c995b4e8bbc5.Ie401d9cf02daaa5e6adf2b3c309643589e3ead71@changeid
Remove the unused IWL_MLD_SCAN_EXPIRE_TIME_SEC constant from
constants.h and its corresponding IWL_MLD_SCAN_EXPIRE_TIME
macro definition from mlo.c. These definitions are no longer
referenced.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.4be7221113cf.I13e32d575bb854709af374519332b998bc1fed4a@changeid
iwlmld is now the op mode that is used for EHT devices,
so iwlmvm code can never run in MLO.
Clean up some more MLO code.
Signed-off-by: Nidhish A N <nidhish.a.n@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.8efcec472e91.Icaf4f4d6b9008e12310f408cfef7f35643f27ca5@changeid
The APIs in uefi.h are not firmware API files nor are they pure software
objects. They really reflect a specific layout we expect to see in the
UEFI tables.
Since the UEFI objects are encoded into the BIOS, we can't use the same
values for the declaration of the UEFI objects and for the pure software
object like iwl_sar_profile in the firmware runtime object.
Decouple the two types.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.db39a64073db.I21486dedb7357570151437cb0211b697e0efb61d@changeid
When we fill the SAR values, we read values from the BIOS store in the
firmware runtime object and write them into the command that we send to
the firmware.
We assumed that the size of the firmware command is not longer than the
BIOS tables. This has been true until now, but this is not really safe.
We will soon have an firmware API change that will increase the size of
the table in the command and we want to make sure that we don't have a
buffer overrun when we read the firmware runtime object.
Add this safety measure.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.99aaf2df072a.I5942590b81324b17e2a369f0c354cafee0f70ef5@changeid
There is a new version of this command to indicate which AP type in
UNII-9 is supported per country.
This adds support for a new UEFI table that will include that data to be
filled in the new AP type table.
Rename the uats_table field in firmware_runtime structure since it
includes now the UATS and the new UNEB table coming from UEFI.
For the same reason, rename iwl_mld_init_uats.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.b839655712c5.I3dfca54bd19d6bd5f7ca385ea63be086ece9c1d0@changeid
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260210143332.206146-4-marco.crivellari@suse.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251120100850.66192-3-marco.crivellari@suse.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251120100850.66192-2-marco.crivellari@suse.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Similar to vif link management, postpone sta link destuction in
mt7996_mac_sta_remove() introducing mt7996_mac_sta_remove_link utility
routine and just disable sta link running mt7996_mac_sta_remove_links
routine.
This is a preliminary patch in order to support MLO link reconfiguration
in MT7996 driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260315-mt7996-mlo-link-reconf-v1-6-a8a634fbc927@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
