`wdt.rst` is only about the Watchdog from "Industrial Computer Source"
(ICS). Change the title and rename the file to better express this.
Add missing SPDX license identifier `GPL-2.0-or-later` same as code to
silence `checkpatch`.
Fix wrong link to sample driver in drivers/watchdog/smsc37b787_wdt.c.
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Link: https://lore.kernel.org/r/5a71979d8e8ab8e0a30de33f6aa2540b3b5dc1ee.1777972790.git.phahn-oss@avm.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Lenovo SE10 Gen 2 platform uses a watchdog chip from the same family.
Watchdog functionality is the same, so update the driver with the new chip
ID.
Add the Gen 2 MTM's to enable support on the platform.
Tested on SE10 G2.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20260428124954.1193450-1-mpearson-lenovo@squebb.ca
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the Andes ATCWDT200 watchdog timer. The driver implements
programmable reset and interrupt timers, and includes automatic detection
of the supported IntTime bit-width.
Integrated with the Linux watchdog framework, it supports basic operations
including start, stop, ping, timeout configuration, and system reset via
the restart handler.
Signed-off-by: CL Wang <cl634@andestech.com>
Link: https://lore.kernel.org/r/20260115081444.2452357-3-cl634@andestech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the devicetree binding documentation for the Andes ATCWDT200
watchdog timer.
ATCWDT200 is the IP name, which is embedded in AndesCore-based
platforms or SoCs such as AE350 and Qilai.
Signed-off-by: CL Wang <cl634@andestech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260115081444.2452357-2-cl634@andestech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
AT91_WDT_WDDIS (bit 15) applies to SAMA5/AT91SAM9261 and
AT91_SAM9X60_WDDIS (bit 12) to SAM9X60/SAMA7G5/SAM9X75. Update
comments to reflect this and add SAMA7G5 and SAM9X75 datasheet
references to the file header.
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20260302113310.133989-3-balakrishnan.s@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On i.MX94, watchdog sources clock from bus clock that will be always on
during the lifecycle of Linux. There is a Low Power Clock Gating(LPCG)
between the bus clock and watchdog, but the LPCG is not exported for
software to control, it is hardware automatically controlled. When
Cortex-A55 executes WFI during suspend flow, the LPCG will automatically
gate off the clock to stop watchdog and resume clock when Cortex-A55 is
woke up.
So watchdog could always be alive to protect Linux, except Cortex-A
platform WFI is executed in Linux suspend flow.
Introduce a new hardware feature flag to indicate CPU low-power-mode
auto clock gating support, and use it to avoid stopping the watchdog
during suspend when LPCG can safely keep it running.
Add i.MX94-specific watchdog hardware data and DT compatible entry to
enable this behavior.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
[peng.fan@nxp.com: rewrite commit log for clarity]
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20260206-imx94-wdog-v2-1-4dd725faec1f@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This configures the reaction between NMI and reset for WWD.
On K3 SoCs other than AM62L SoC [0], watchdog reset output is routed
to the ESM module which can subsequently route the signal to safety
master or SoC reset. On AM62L, the watchdog reset output is routed
to the SoC HW reset block. So, add a new compatible for AM62L to add
SoC data and configure reaction to reset instead of NMI.
[0] https://www.ti.com/product/AM62L
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260206234255.380530-3-jm@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver currently only supports builds against a PIC32 target, or
with COMPILE_TEST on MIPS. Now that commit 0f8a61ca78 ("watchdog:
pic32-dmt: update include to use pic32.h from platform_data") is merged,
it's possible to compile this driver on other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260222-watchdog-pic32-v1-2-a2538aa528d1@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver currently only supports builds against a PIC32 target, or
with COMPILE_TEST on MIPS. Now that commit 5aa5879eee ("watchdog:
pic32-wdt: update include to use pic32.h from platform_data") is merged,
it's possible to compile this driver on other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260222-watchdog-pic32-v1-1-a2538aa528d1@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver uses devm_add_action_or_reset() to register sprd_wdt_disable()
as a managed cleanup action.
When devm_watchdog_register_device() fails, the devm core will invoke
the cleanup action automatically.
The explicit sprd_wdt_disable() call in the error path is therefore
redundant and results in adouble cleanup.
Fixes: 78d9bfad2e ("watchdog: sprd_wdt: Convert to use device managed functions and other improvements")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20260223-sprd_wdt-v1-1-2e71f9a76ecb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Kernel now supports chained power-off handlers. Use
devm_register_sys_off_handler() that registers a power-off handler. Legacy
pm_power_off() will be removed once all drivers and archs are converted to
the new sys-off API.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20260302180853.224112-1-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the support for the watchdog IP available on RZ/G3L SoC. The
watchdog IP available on RZ/G3L SoC is identical to the one found on
RZ/G2L SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260206112227.233229-1-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When the bindings for the Renesas RZ/V2H(P) SoC were factored
out IP WDT0 was selected for the example, however the HW user
manual states that only IP WDT1 can be used by Linux.
This commit is part of a series that removes WDT{0,2,3} support
from the kernel, therefore the example from the bindings has
lost its meaning.
Update the example accordingly.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20260203124247.7320-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time and revert commit 354f31e9d2 ("dt-bindings: watchdog:
Add SMARC-sAM67 support").
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260302122540.1377444-7-mwalle@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver hardcoded AT91_WDT_WDDIS (bit 15) in wdt_enabled and the
probe initial state readout. SAM9X60 and SAMA7G5 use bit 12
(AT91_SAM9X60_WDDIS), causing incorrect WDDIS detection.
Introduce a per-device wddis_mask field to select the correct WDDIS
bit based on the compatible string.
Fixes: 266da53c35 ("watchdog: sama5d4: readout initial state")
Co-developed-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20260302113310.133989-2-balakrishnan.s@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On Qualcomm SoCs running under the Gunyah hypervisor, access to watchdog
through MMIO is not available on all platforms. Depending on the
hypervisor configuration, the watchdog is either fully emulated or
exposed via ARM's SMC Calling Conventions (SMCCC) through the Vendor
Specific Hypervisor Service Calls space.
Add driver to support the SMC-based watchdog provided by the Gunyah
Hypervisor. Device registration is done in the QCOM SCM driver after
checks to restrict the watchdog initialization to Qualcomm devices
running under Gunyah.
Gunyah watchdog is not a hardware but an SMC-based vendor-specific
hypervisor interface provided by the Gunyah hypervisor. The design
involving QCOM SCM driver for registering the platform device has been
devised to avoid adding non-hardware nodes to devicetree.
Tested-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Hrishabh Rajput <hrishabh.rajput@oss.qualcomm.com>
Signed-off-by: Pavankumar Kondeti <pavan.kondeti@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-gunyah_watchdog-v8-2-4c1c0689de22@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The gpio_wdt device driver uses the device property APIs, so it is
firmware agnostic. For this reason we can now add the ACPI support in
Kconfig.
In this way it can be used seamlessly in ACPI and DT systems.
For example, a typical GPIO watchdog device configuration, in an ACPI
SSDT table, could be:
Device (WDOG) {
Name (_HID, "WDOG0001")
Name (_CID, "PRP0001")
Name (_UID, One)
Name (_CRS, ResourceTemplate () {
GpioIo (Exclusive, PullNone, 0, 0, IoRestrictionOutputOnly,
"\\_SB.GPI0", 0, ResourceConsumer, ,) { 3 }
})
Method (_STA, 0, NotSerialized) {
Return (0x0F)
}
Name (_DSD, Package (2)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (5)
{
Package () { "compatible", Package() { "linux,wdt-gpio" } },
Package () { "hw_algo", "toggle" },
Package () { "gpios", Package () { ^WDOG, 0, 0, 0 } },
Package () { "hw_margin_ms", 2000 },
Package () { "always-running", 1 },
},
})
}
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260323125204.164785-2-f.suligoi@asem.it
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The watchdog hardware the hpwdt driver uses was added to the UV
platform for UV_5, but the logging mentioned by this driver was not
added to the BIOS. When the watchdog fires, the printed message had
the administrators and developers looking for non-existent log files,
and confused about whether a watchdog actually tripped.
Change the message that prints on UV platforms so it doesn't send the
user looking for non-existent logs.
To aid in any future debugging, include all 8 bits of the NMISTAT
register in the output, not just the two bits being used to determine
this was "mynmi". And provide names to the bits in NMISTAT so the
code is easier to understand.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260318155005.90271-1-steve.wahl@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since commit 1f4ea4838b ("mcb: Add missing modpost build support")
the MODULE_ALIAS() is redundant as the module alias is now
automatically generated from the MODULE_DEVICE_TABLE().
Remove the explicit alias.
No functional change intended.
Reviewed-by: Jorge Sanjuan Garcia <dev-jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260323112413.21923-2-dev-josejavier.rodriguez@duagon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Variables declared in probe() don't follow the reverse xmas
tree convention.
Fix the declaration in order to follow the convention.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260324114849.242755-2-herve.codina@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In the probe() function the following pattern is present several times:
if (err) {
dev_err(dev, ...);
return err;
}
Replace them by dev_err_probe() calls.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260324114849.242755-3-herve.codina@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 009637de1f ("watchdog: sp5100_tco: support Hygon FCH/SCH
(Server Controller Hub)") added Hygon vendor matching to the efch
layout selection, but newer Hygon 0x790b SMBus devices still need the
efch_mmio path.
The efch_mmio path enables EFCH_PM_DECODEEN_WDT_TMREN before probing the
watchdog MMIO block. If firmware leaves that bit clear and the driver
picks the legacy efch path instead, probe falls back to the alternate
window and fails with "Watchdog hardware is disabled".
Select efch_mmio for Hygon 0x790b devices with revision 0x51 or later,
matching the equivalent AMD behavior and allowing the watchdog to
initialize on those systems.
Fixes: 009637de1f ("watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)")
Signed-off-by: Yingjie Gao <gaoyingjie@uniontech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260402071617.634563-2-gaoyingjie@uniontech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When the system boots up after a watchdog reset, the EXPIRED_STATUS bit
in the WDT_STS register is cleared. To identify if the system was
restarted due to WDT expiry, XBL update the information in the IMEM region.
Update the driver to read the restart reason from IMEM and populate the
bootstatus accordingly.
With the CONFIG_WATCHDOG_SYSFS enabled, user can extract the information
as below:
cat /sys/devices/platform/soc@0/f410000.watchdog/watchdog/watchdog0/bootstatus
32
For backward compatibility, keep the EXPIRED_STATUS bit check. Add a new
function qcom_wdt_get_bootstatus() to read the restart reason from
IMEM.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260408-wdt_reset_reason-v10-2-caf66786329f@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the "sram" property for the watchdog device on Qualcomm
IPQ platforms. Use this property to extract the restart reason from
IMEM, which is updated by XBL. Populate the watchdog's bootstatus sysFS
entry with this information, when the system reboots due to a watchdog
timeout.
Describe this property for the IPQ5424 watchdog device and extend support
to other targets subsequently.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260408-wdt_reset_reason-v10-1-caf66786329f@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260422082736.81981-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The machzwd driver supports the integrated watchdog of the ZF Micro
ZFx86 SoC, which contains a 486-compatible core [1]. Since 486
support was removed in commit 8b793a92d8 ("x86/cpu: Remove
M486/M486SX/ELAN support"), the driver is no longer useful, Remove it.
[1] https://www.zfmicro.com/zfx86.html
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260428014806.35400-1-enelsonmoore@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmnuTSsUHHN3Ym95ZEBj
aHJvbWl1bS5vcmcACgkQrQKIl8bklSUtpw//UbUCefvtSuj7UJLqgZXZgZvos9hU
kQO0kt+wsZCx0w3vKjJojW7E8IiITJDWzVDq6Ib6dVvpoLy0sOvSCbmKrcYLOjaf
kBXAvPHrpBNDDgRD+z3Ci9Sz8Dk9N+x7vQYvXGpUDbGY+dYAx8NGjdbSMqmQofC1
CWYgneh16hUYN8dgZOXC3fZmj4wHt4DGAS3f+uVWML1cLIDv5JR31SAu5i3htgxr
8JUDsBiM2quAjgV81Qp9B102hQGdKBW8AquUnknwtegja6+Go59x2/5jlvE0wjQJ
6Hf7eyUL6PgiAUEGiebLPMKgY6FWT9FtYCuuSqC84EiB5iiLr1MZBX5JsdJ15QRq
fogaABOJxvzy7XnVk0ELqNzn5/uJ/UDPFJkm2RUOUENswi4QuW3O9vJANKTFdUq4
CSz4JO5nqAe+gIbrURl+H8G50nWDHdId69uimbrhZst1E3sue9xDI9G7VwBTTf/8
o+8ylQkfWhGlSMq8yOMTTqUqk5O+uzfEYUYQ7EdzDknuoEsFh1Fy7UpzBLIqVdjd
WylzH9zOdVEI/OUuGmKOJHXy1amGBEV5EISvMRplLyB3R/mFWvIe5kZ4NhtrL9b0
zMjVShkrOP4X4ydOkz6l6oNwgBG+pnosewbwsSYKzSiF5czaXfv96UrQ1J/JNj27
X1Qr/BuY1E2dz0k=
=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----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=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmntBg4ACgkQY6TcMGxw
OjL+5A/7BHJ1q8BCJwhHHa0XRQcwB4afZehSB0qasNbbAqJFgzrwZfg6mVXhXO3Y
hry0SjzmFkCL9h6jckye2hPFjJsiaBC0Tauvmun6litrPnOrK+IK+P+Q7iKPap3Q
5bSy+tDJXx3F3f+6LgDSVnrQFI3Q+nMHY/b1IWJkGW9Jpg/QlhU3UazN1kwu9Hyn
nBvCczHyTYlSqaDSFUkQRXLfzXiMU16/iHzwsJZmOU03HNb1IF0Ngi8fIrPf1OIK
2ZoyLzH0O0u+k10M+Sq/A2LKsgjnBOlu/L4iJUOKlhuq3Ze4/SY+C3IP+XbMyYF5
EZ7pxPz66/WLzOpVx1xaSLpFiRBcCgbvwT2TY3P7e8A09AGye+AB+cqdKF9r9mX2
p57cv2ZkZs/bGEjee2rSs7TTT4vZUhaa4SS6C4xrKIIoymFyKlh6E5fzWNUk4zua
oN0djSSbtdIpSErIrlxp5xiITCIjSTZMVQKccs3qV5QhzNH8zsUPwwCM1cDawALC
/HP6KnYmt6fTx3PS4BPVnMCQqSu425tvMhy5nvjbgdFVPd+CgOEAW6qO82nI3UFY
KDNP4O224CVuOeX2WAU6+gOCTwqxg6rbjASAGGFOl6ox8eW555wpedVls0Y8oUQm
z0O+gK33L/0hrw5Qnhh2If4S7gyNwWwVif2Gosf5ODRQ6LM5UOg=
=mY/t
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
mentioning separately: Rafael's commit converting tpm_crb from ACPI driver
to a platform driver. Starting from this release cycle, the branch with TPM
changes mirrored to next is 'for-next-tpm', and patches for keys have their
own separate 'for-next-keys' branch.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaezVbgAKCRAaerohdGur
0ggHAQDmhaZ2C3ddAV1WjfXh1YqdWAmqEqoP7ZHAh4OrjyRPTQD+Pc4xl9TSOgHx
/9WzzV6AM6fL5RuC2/PO5RvOKF9mswc=
=tpJM
-----END PGP SIGNATURE-----
Merge tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
