When we re-assign a slot to a different VM, we need to make sure the
old VM caches are flushed before doing the switch. Specialize
panthor_mmu_as_disable() so we can skip the slot programmation while
still getting the cache flushing, and call this helper from
panthor_vm_active() when an idle slot is recycled.
v2:
- Collect R-bs
Fixes: 6e2d3b3e85 ("drm/panthor: Add support for atomic page table updates")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251203121750.404340-3-boris.brezillon@collabora.com
It appears the timeout can still be enabled when we reach that point,
because of the asynchronous progress check done on queues that resets
the timer when jobs are still in-flight, but progress was made.
We could add more checks to make sure the timer is not re-enabled when
a group can't run anymore, but we don't have a group to pass to
queue_check_job_completion() in some context.
It's just as safe (we just want to be sure the timer is stopped before
we destroy the queue) and simpler to drop the WARN_ON() in
group_free_queue().
v2:
- Collect R-bs
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251203121750.404340-2-boris.brezillon@collabora.com
No need to conditional compile that code, let the compilers dead code
elimination handle it instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://lore.kernel.org/r/20251006134713.1846-1-christian.koenig@amd.com
After issuing a firmware suspend request, the driver must ensure that the
suspend operation has completed before proceeding. Add polling of the
MPNPU_PWAITMODE register to confirm that the firmware has fully entered
the suspended state. This prevents race conditions where subsequent
operations assume the firmware is idle before it has actually completed
its suspend sequence.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251202165427.507414-1-lizhi.hou@amd.com
Runqueues are currently almost everywhere being read unlocked in
drm/sched. At XDC 2025, the assembled developers were unsure whether
that's legal and whether it can be fixed. Someone should find out.
Add a todo entry for the unlocked runqueue reader problem.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251107135701.244659-4-phasta@kernel.org
The GPU scheduler has a great many problems and deserves its own TODO
section.
Add a section and a first task describing the problem of
drm_sched_resubmit_jobs() being deprecated without a successor.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251107135701.244659-3-phasta@kernel.org
There are no implementations of fb_debug_enter and fb_debug_leave.
Remove the callbacks from struct fb_ops and clean up the caller.
The field save_graphics in fbcon_par is also no longer required.
Remove it as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-6-tzimmermann@suse.de
Remove the debug_enter/debug_leave helpers, as there are no DRM
drivers supporting debugging with kgdb. Remove code to keep track
of existing fbdev-emulation state. None of this required any longer.
Also remove mode_set_base_atomic from struct drm_crtc_helper_funcs,
which has no callers or implementations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-5-tzimmermann@suse.de
Remove the implementation of the CRTC helper mode_set_base_atomic
from radeon. It pretends to provide mode setting for kdb debugging,
but has been broken for some time.
Kdb output has been supported only for non-atomic mode setting since
commit 9c79e0b1d0 ("drm/fb-helper: Give up on kgdb for atomic drivers")
from 2017.
While radeon provides non-atomic mode setting, kdb assumes that the GEM
buffer object is at a fixed location in video memory. This assumption
currently blocks radeon from converting to generic fbdev emulation.
Fbdev-ttm helpers use a shadow buffer with a movable GEM buffer object.
Triggering kdb does therefore not update the display.
Another problem is that the current implementation does not handle
USB keyboard input. Therefore a serial terminal is required. Then when
continuing from the debugger, radeon fails with an error:
[7]kdb> go
[ 40.345523][ C7] BUG: scheduling while atomic: bash/1580/0x00110003
[...]
[ 40.345613][ C7] schedule+0x27/0xd0
[ 40.345615][ C7] schedule_timeout+0x7b/0x100
[ 40.345617][ C7] ? __pfx_process_timeout+0x10/0x10
[ 40.345619][ C7] msleep+0x31/0x50
[ 40.345621][ C7] radeon_crtc_load_lut+0x2e4/0xcb0 [radeon 31c1ee785de120fcfd0babcc09babb3770252b4e]
[ 40.345698][ C7] radeon_crtc_gamma_set+0xe/0x20 [radeon 31c1ee785de120fcfd0babcc09babb3770252b4e]
[ 40.345760][ C7] drm_fb_helper_debug_leave+0xd8/0x130
[ 40.345763][ C7] kgdboc_post_exp_handler+0x54/0x70
[...]
and the system hangs.
Support for kdb feels pretty much broken. Hence remove the whole kdb
support from radeon.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-4-tzimmermann@suse.de
Remove the implementation of the CRTC helper mode_set_base_atomic
from nouveau. It pretends to provide mode setting for kdb debugging,
but has been broken for some time.
Kdb output has been supported only for non-atomic mode setting since
commit 9c79e0b1d0 ("drm/fb-helper: Give up on kgdb for atomic drivers")
from 2017.
While nouveau provides non-atomic mode setting for some devices, kdb
assumes that the GEM buffer object is at a fixed location in video
memory. This has not been the case since
commit 4a16dd9d18 ("drm/nouveau/kms: switch to drm fbdev helpers")
from 2022. Fbdev-ttm helpers use a shadow buffer with a movable GEM
buffer object. Triggering kdb does therefore not update the display.
Hence remove the whole kdb support from nouveau.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-3-tzimmermann@suse.de
Remove all implementations of the CRTC helper mode_set_base_atomic
from amdgpu. It pretends to provide mode setting for kdb debugging,
but has been broken for some time.
Kdb output has been supported only for non-atomic mode setting since
commit 9c79e0b1d0 ("drm/fb-helper: Give up on kgdb for atomic drivers")
from 2017.
While amdgpu provides non-atomic mode setting for some devices, kdb
assumes that the GEM buffer object is at a fixed location in video
memory. This has not been the case since commit 087451f372 ("drm/amdgpu:
use generic fb helpers instead of setting up AMD own's.") from 2021.
Fbdev-ttm helpers use a shadow buffer with a movable GEM buffer object.
Triggering kdb does not update the display.
Hence remove the whole kdb support from amdgpu.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-2-tzimmermann@suse.de
Call drm_gem_fb_begin_cpu_access() and drm_gem_fb_end_cpu_access()
around cursor image updates. Imported buffers might have to be
synchronized for CPU access before they can be used.
Ignore errors from drm_gem_fb_begin_cpu_access(). These errors can
often be transitory. The cursor image will be updated on the next
frame. Meanwhile display a white square where the cursor would be.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>>
Link: https://patch.msgid.link/20251126094626.41985-4-tzimmermann@suse.de
Copy the ARGB4444 cursor buffer to system memory if it is located in
I/O memory. While this cannot happen with ast's native GEM objects, an
imported buffer object might be on the external device's I/O memory.
If the cursor buffer is located in system memory continue to use it
directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>>
Link: https://patch.msgid.link/20251126094626.41985-3-tzimmermann@suse.de
Move the format conversion of the cursor framebuffer into the new
helper ast_cursor_plane_get_argb4444(). It returns a buffer in system
memory, which the atomic_update handler copies to video memory.
The returned buffer is either the GEM buffer itself, or a temporary
copy within the plane in ARGB4444 format.
As a small change, list supported formats explicitly in the switch
statement. Do not assume ARGB8888 input by default. The cursor
framebuffer knows its format, so should we.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251126094626.41985-2-tzimmermann@suse.de
Currently the user can write anything into the drm.panic_screen modparam,
either at runtime via sysfs, or as a kernel boot time argument. Invalid
strings will be silently accepted and ignored at use time by defaulting to
the 'user' panic mode.
Let instead add some validation in order to have immediate feedback when
something has been mistyped, or not compiled in.
For example during kernel boot:
Booting kernel: `bsod' invalid for parameter `drm.panic_screen'
Or at runtime:
# echo -n bsod > /sys/module/drm/parameters/panic_screen
-bash: echo: write error: Invalid argument
Change of behavior is that when invalid mode is attempted to be
configured, currently the code will default to the 'user' mode, while with
this change the code will ignore it, and default to the mode set at kernel
build time via CONFIG_DRM_PANIC_SCREEN.
While at it lets also fix the module parameter description to include all
compiled in modes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251127090349.92717-1-tvrtko.ursulin@igalia.com
It's only used in a couple places and everyone else is just using
sched_queue_delayed_work(sched, tick, 0) directly, so let's make
this consistent.
v2:
- Add R-b
v3:
- Collect R-b
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20251128094839.3856402-9-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
If the group is already assigned a slot but was idle before this job
submission, we need to make sure the priority rotation happens in the
future. Extract the existing logic living in group_schedule_locked()
and call this new sched_resume_tick() helper from the "group is
assigned a slot" path.
v2:
- Add R-b
v3:
- Re-use queue_mask to clear the bit
- Collect R-b
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20251128094839.3856402-8-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
When we have multiple active groups with the same priority, we need to
keep ticking for the priority rotation to take place. If we don't do
that, we might starve slots with lower priorities.
It's annoying to deal with that in tick_ctx_update_resched_target(),
so let's add a ::stop_tick field to the tick context which is
initialized to true, and downgraded to false as soon as we detect
something that requires to tick to happen. This way we can complement
the current logic with extra conditions if needed.
v2:
- Add R-b
v3:
- Drop panthor_sched_tick_ctx::min_priority (no longer relevant)
- Collect R-b
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20251128094839.3856402-7-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
We have a few paths where we schedule the tick work immediately without
changing the resched_target. If the tick was stopped, this would lead
to a remaining_jiffies that's always > 0, and it wouldn't force a full
tick in that case. Add extra checks to cover that case properly.
v2:
- Fix typo
- Simplify the code as suggested by Steve
v3:
- Collect R-b
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20251128094839.3856402-6-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
When rotating group priorities, we want the group with the
highest priority to go back to the end of the queue, and all
other active groups to get their priority bumped, otherwise
some groups will never get a chance to run with the highest
priority. This implies moving the rotation itself to
tick_work(), and only dealing with old group ordering in
tick_ctx_insert_old_group().
v2:
- Add R-b
- Fix the commit message
v3:
- Drop the full_tick argument in tick_ctx_init()
- Collect R-b
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20251128094839.3856402-5-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
We have a full tick when the remaining time to the next tick is zero,
not the other way around. Declare a full_tick variable so we don't get
that test wrong in other places.
v2:
- Add R-b
v3:
- Collect R-b
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20251128094839.3856402-4-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Not only this only works once, because of how extract events work
(event is enabled if the req and ack bit differ, and it's signalled
by the FW by setting identical req and ack, to re-enable the event,
we need to toggle the bit, which we never do). But more importantly,
we never do anything with this event, so we're better off dropping it
when programming the CS slot.
v2:
- Add R-b
v3:
- Collect R-b
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20251128094839.3856402-3-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
csg_slot_sync_queues_state_locked() queries the queues state which can
then be used to determine if a group is idle or not. Let's base our
idleness detection logic solely on the {idle,blocked}_queues masks to
avoid inconsistencies between the group state and the state of its
subqueues.
v2:
- Add R-b
v3:
- Collect R-b
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20251128094839.3856402-2-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Groups are only moved out of the runnable lists when
panthor_group_stop() is called or when they run out of jobs.
What should not happen though is having one group added to one of
the runnable list after reset.in_progress has been set to true, but
that's not something we can easily check, so let's just drop the
WARN_ON() in panthor_sched_pre_reset().
v2:
- Adjust explanation in commit message
v3:
- Collect R-b
v4:
- No changes
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251128084841.3804658-7-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
There's no reason for panthor_vm_[un]map_pages() to fail unless the
drm_gpuvm state and the page table are out of sync, so let's reflect that
by making panthor_vm_unmap_pages() a void function and adding
WARN_ON()s in various places. We also try to recover from those
unexpected mismatch by checking for already unmapped ranges and skipping
them. But there's only so much we can do to try and cope with such
SW bugs, so when we see a mismatch, we flag the VM unusable and disable
the AS to avoid further GPU accesses to the memory.
It could be that the as_disable() call fails because the MMU unit is
stuck, in which case the whole GPU is frozen, and only a GPU reset can
unblock things. Ater the reset, the VM will be seen as unusable and
any attempt to re-use it will fail, so we should be covered for any
use-after-unmap issues.
v2:
- Fix double unlock
v3:
- Collect R-b
v4:
- No changes
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251128084841.3804658-6-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Move the lock/flush_mem operations around the gpuvm_sm_[un]map() calls
so we can implement true atomic page updates, where any access in the
locked range done by the GPU has to wait for the page table updates
to land before proceeding.
This is needed for vkQueueBindSparse(), so we can replace the dummy
page mapped over the entire object by actual BO backed pages in an atomic
way. But it's also useful to avoid "AS_ACTIVE bit stuck" failures in
the sm_[un]map() path, leading to gpuvm state inconsistencies.
v2:
- Adjust to match the two new preliminary patches
v3:
- Collect R-b
v4:
- No changes
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251128084841.3804658-5-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
We have seen a few cases where the whole memory subsystem is blocked
and flush operations never complete. When that happens, we want to:
- schedule a reset, so we can recover from this situation
- in the reset path, we need to reset the pending_reqs so we can send
new commands after the reset
- if more panthor_gpu_flush_caches() operations are queued after
the timeout, we skip them and return -EIO directly to avoid needless
waits (the memory block won't miraculously work again)
Note that we drop the WARN_ON()s because these hangs can be triggered
with buggy GPU jobs created by the UMD, and there's no way we can
prevent it. We do keep the error messages though.
v2:
- New patch
v3:
- Collect R-b
- Explicitly mention the fact we dropped the WARN_ON()s in the commit
message
v4:
- No changes
Fixes: 5cd894e258 ("drm/panthor: Add the GPU logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251128084841.3804658-4-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The meat in lock_region() is about packing a region range into a
single u64. The rest is just a regular reg write plus a
as_send_cmd_and_wait() call that can easily be inlined in
mmu_hw_do_operation_locked().
v2:
- New patch
v3:
- Don't LOCK is the region has a zero size
v4:
- Collect R-b
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251128084841.3804658-3-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
There's currently no situation where we want to issue a command to an
AS and not wait for this command to complete. The wait is either
explicitly done (LOCK, UNLOCK) or it's missing (UPDATE). So let's
turn write_cmd() into as_send_cmd_and_wait() that has the wait after
a command is sent.
v2:
- New patch
v3:
- Collect R-b
v4:
- No changes
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251128084841.3804658-2-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This patchset enables support for the Gamma 2.2.
With this patch the following IGT subtests pass:
kms_colorop --run plane-XR30-XR30-gamma_2_2
kms_colorop --run plane-XR30-XR30-gamma_2_2_inv-gamma_2_2
kms_colorop --run plane-XR30-XR30-gamma_2_2_inv-gamma_2_2-gamma_2_2_inv
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-52-alex.hung@amd.com
Add "DRM_COLOROP_1D_CURVE_GAMMA22" and DRM_COLOROP_1D_CURVE_GAMMA22_INV
subtypes to drm_colorop of DRM_COLOROP_1D_CURVE.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-51-alex.hung@amd.com
Check dpp.hw_3d_lut before creating shaper tf/lut and 3dlut colorops in
colorpipeline and handling these colorops.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-49-alex.hung@amd.com
Add kernel doc for AMD color pipeline.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-48-alex.hung@amd.com
This adds support for a 3D LUT.
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. Multiplier
3. 3x4 CTM
4. 1D curve colorop
5. 1D LUT
6. 3D LUT
7. 1D curve colorop
8. 1D LUT
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-47-alex.hung@amd.com
It is to be used to enable HDR by allowing userpace to create and pass
3D LUTs to kernel and hardware.
new drm_colorop_type: DRM_COLOROP_3D_LUT.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-46-alex.hung@amd.com
Not all HW will be able to do bypass on all color
operations. Introduce an 32 bits 'flags' for all colorop
init functions and DRM_COLOROP_FLAG_ALLOW_BYPASS for creating
the BYPASS property when it's true.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-45-alex.hung@amd.com
We want to make sure userspace is aware of the 1D LUT
interpolation. While linear interpolation is common it
might not be supported on all HW. Give driver implementers
a way to specify their interpolation.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-44-alex.hung@amd.com
Swap the order of matrix and multiplier as designed in hardware.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-43-alex.hung@amd.com
This adds support for a multiplier. This multiplier is
programmed via the HDR Multiplier in DCN.
With this change the following IGT tests pass:
kms_colorop --run plane-XR30-XR30-multiply_125
kms_colorop --run plane-XR30-XR30-multiply_inv_125
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. 3x4 CTM
3. Multiplier
4. 1D curve colorop
5. 1D LUT
6. 1D curve colorop
7. 1D LUT
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-42-alex.hung@amd.com
This introduces a new drm_colorop_type: DRM_COLOROP_MULTIPLIER.
It's a simple multiplier to all pixel values. The value is
specified via a S31.32 fixed point provided via the
"MULTIPLIER" property.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-41-alex.hung@amd.com
This adds support for a 3x4 color transformation matrix.
With this change the following IGT tests pass:
kms_colorop --run plane-XR30-XR30-ctm_3x4_50_desat
kms_colorop --run plane-XR30-XR30-ctm_3x4_overdrive
kms_colorop --run plane-XR30-XR30-ctm_3x4_oversaturate
kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_enc
kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_dec
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. 3x4 CTM
3. 1D curve colorop
4. 1D LUT
5. 1D curve colorop
6. 1D LUT
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-40-alex.hung@amd.com
This patch adds colorops for custom 1D LUTs in the SHAPER and
BLND HW blocks.
With this change the following IGT tests pass:
kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut
kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut-srgb_eotf_lut
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. 1D curve colorop
3. 1D LUT
4. 1D curve colorop
5. 1D LUT
The 1D curve colorops support sRGB, BT2020, and PQ scaled to 125.0.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-39-alex.hung@amd.com
We've previously introduced DRM_COLOROP_1D_CURVE for
pre-defined 1D curves. But we also have HW that supports
custom curves and userspace needs the ability to pass
custom curves, aka LUTs.
This patch introduces a new colorop type, called
DRM_COLOROP_1D_LUT that provides a SIZE property which
is used by a driver to advertise the supported SIZE
of the LUT, as well as a DATA property which userspace
uses to set the LUT.
DATA and size function in the same way as current drm_crtc
GAMMA and DEGAMMA LUTs.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-38-alex.hung@amd.com
Add helper to extract lut values in 32-bit precision needed by
hardware.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-37-alex.hung@amd.com
Existing LUT precision structure drm_color_lut has only 16 bit
precision. This is not enough for upcoming enhanced hardwares
and advance usecases like HDR processing. Hence added a new
structure with 32 bit precision values.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-36-alex.hung@amd.com
This adds support for the BT.709/BT.2020 transfer functions
on all current 1D curve plane colorops, i.e., on DEGAM, SHAPER,
and BLND blocks.
With this change the following IGT subtests pass:
kms_colorop --run plane-XR30-XR30-bt2020_inv_oetf
kms_colorop --run plane-XR30-XR30-bt2020_oetf
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-35-alex.hung@amd.com
The BT.709 and BT.2020 OETFs are the same, the only difference
being that the BT.2020 variant is defined with more precision
for 10 and 12-bit per color encodings.
Both are used as encoding functions for video content, and are
therefore defined as OETF (opto-electronic transfer function)
instead of as EOTF (electro-optical transfer function).
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-34-alex.hung@amd.com
