Convert the device-tree parsing path to the generic fwnode/device
property accessors so the driver can be probed on ACPI and swnode
platforms as well as OF. The helper is renamed from
i2c_mux_reg_probe_dt() to i2c_mux_reg_probe_fw() to reflect that.
Accessor translation:
of_parse_phandle("i2c-parent") +
of_find_i2c_adapter_by_node() -> fwnode_find_reference() +
i2c_find_adapter_by_fwnode()
of_get_child_count() -> device_get_child_node_count()
of_property_read_bool() -> device_property_read_bool()
for_each_child_of_node() -> device_for_each_child_node()
of_property_read_u32("reg") on ACPI device nodes:
acpi_get_local_address()
everything else (OF, swnode,
ACPI data nodes):
fwnode_property_read_u32()
of_property_read_u32("idle-state") -> device_property_read_u32()
The child-node branch uses is_acpi_device_node() rather than
is_acpi_node(): the latter also matches ACPI data nodes (the
_DSD hierarchical-property children used by PRP0001-style
firmware), which have no ACPI handle and would make
acpi_get_local_address() fall back to evaluating _ADR against the
root namespace and return -ENODATA. Routing data nodes through
fwnode_property_read_u32() instead lets them resolve the "reg"
property the same way OF and swnode children do.
Behavioural preservations (deliberate, to avoid regressing existing
users):
- The three-way endian fallback is kept verbatim: an explicit
"little-endian" property wins, then "big-endian", and otherwise
the host's compile-time byte order. device_is_big_endian() is
not used here because it ignores "little-endian" and introduces
"native-endian" semantics, which would diverge from the binding.
- The "if (!mux->data.reg)" guard around
devm_platform_get_and_ioremap_resource() in probe() is kept.
drivers/platform/mellanox/mlx-platform.c registers i2c-mux-reg
platform_devices with no memory resource and supplies a
pre-set .reg / .reg_size through struct
i2c_mux_reg_platform_data; without the guard those
registrations would fail in probe().
- The "if (!mux->data.reg)" ioremap block (and the paired
reg_size validation that depends on it) is hoisted above
i2c_get_adapter(mux->data.parent), so the fwnode path
preserves master's ordering of "ioremap before parent-adapter
get". For platdata users the validation runs from a slightly
earlier position, but mux->data.reg_size is already set from
platdata by then, so the order is functionally neutral.
The OF-only of_address_to_resource() translation in the old
probe_dt() is dropped because the same address is available from
the platform_device resource table on OF as well as ACPI, and the
existing fallback in probe() ioremaps it.
Acked-by: Peter Rosin <peda@lysator.liu.se>
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Assisted-by: Claude-Code:claude-opus-4-7
Assisted-by: sashiko:gemini-3.1-pro-preview
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Some users want to return an error to the upper layers when
i2c_acpi_client_count() returns 0. Follow the common pattern
in such cases, i.e. return -ENOENT instead of 0.
While at it, fix the kernel-doc warning about missing return value
description.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The AT91 I2C driver depends on ARCH_MICROCHIP.
This I2C controller can be used by the LAN966x PCI device and so
it needs to be available when the LAN966x PCI device is enabled.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The .driver_data member of the struct pci_device_id array were
initialized by list expressions. This isn't easily readable if you're
not into PCI. Using named initializers is more explicit and thus easier
to parse.
This change doesn't introduce changes to the compiled pci_device_id
arrays. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/41316792102ff2860ec019373293cb07d545a0b0.1779481436.git.u.kleine-koenig@baylibre.com
The .driver_data member of the struct pci_device_id array were
initialized by list expressions. This isn't easily readable if you're
not into PCI. Using named initializers is more explicit and thus easier
to parse.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/68667c4ab85716b190d8b705813b610e21a386f6.1779481436.git.u.kleine-koenig@baylibre.com
Fix a spelling mistake in the timeout-check comment.
No functional change.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260503165925.1738-1-sozdayvek@gmail.com
During system reboot or kexec, in-flight I2C transfers can cause
spurious interrupts or leave the bus in an undefined state. Add a
shutdown handler that marks the adapter suspended and resets the
controller, ensuring a clean handoff.
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260430053050.3590173-1-ajay.neeli@amd.com
Recent Tegra I2C controllers have a fairness arbitration register, which
allows configuring the fair idle time required to support MCTP protocol
over I2C. It is enabled by default, adding a per-transfer latency overhead
that impacts non-MCTP I2C buses.
Disable the fairness arbitration register during controller init for buses
that are not MCTP controllers.
Assisted-by: Cursor:claude-4.6-opus
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260518114013.62065-3-akhilrajeev@nvidia.com
Use dmaengine_get_dma_device() to obtain the correct struct device
pointer for dma_alloc_coherent() instead of directly dereferencing
chan->device->dev.
The dmaengine_get_dma_device() helper checks whether the DMA channel
has a per-channel DMA device (chan->dev->chan_dma_dev) and returns it
when available, falling back to the controller device otherwise. On
platforms where the DMA controller sits behind an IOMMU with
per-channel IOVA spaces (e.g. Tegra264 GPC DMA), the per-channel
device carries the correct DMA mapping context. Using the controller
device directly would allocate DMA buffers against the wrong IOMMU
domain, leading to SMMU faults at runtime.
On platforms without per-channel DMA devices the helper returns the
same pointer as before, so there is no change in behavior for existing
hardware.
Assisted-by: Cursor:claude-4.6-opus
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260518114013.62065-2-akhilrajeev@nvidia.com
- use named initializers for arrays of i2c_device_data
-----BEGIN PGP SIGNATURE-----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=fQo7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaib4kwAKCRDaeAVmJtMt
bjHZAP9jzzE3IVw4QNgRvqgePWvIhzbwaI5tBBorVbugshvA6QD+OuJaPyEYVkJD
Z5gtPs3rrYsTQqNkq6k89XjG6B10Jw4=
=TTSZ
-----END PGP SIGNATURE-----
Merge tag 'at24-updates-for-v7.2-rc1' into i2c/i2c-host
at24 updates for v7.2-rc1
- use named initializers for arrays of i2c_device_data
Enable I2C_K1 by default when ARCH_SPACEMIT is configured to ensure SD
card functionality works out-of-the-box.
SpacemiT K1 boards use I2C-controlled PMICs (like the P1 chip) to
provide SD card power supplies. Without the I2C_K1 driver enabled,
regulators cannot be controlled and SD card detection/operation fails.
Suggested-by: Margherita Milani <margherita.milani@amarulasolutions.com>
Suggested-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260526-orangepi-sd-card-i2c-v1-1-b92268bfd467@gmail.com
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20260518164510.805502-2-u.kleine-koenig@baylibre.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add ACPI ID "LECA0003" for LECARC SoCs that integrate
the DesignWare I2C controller.
Also add corresponding ACPI description in acpi_apd.c.
Signed-off-by: Thomas Lin <thomas_lin@lecomputing.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260526-lecarc-i2c-acpi-id-v1-1-f0942bd491d2@lecomputing.com
When the I2C controller attempts a new transaction while the target
controller is shutting down or restarting, it can lead to bus lockups
and system bootloops if the hardware enters an inconsistent state.
Address this by ensuring that the internal state machines are properly
cleared when disabling the controller if target activity is detected.
If the controller remains active after disabling, perform a bus recovery
to reset it to a known good state.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260527-dw-i2c-v5-4-3483057f8d67@wkennington.com
Convert the platform driver to use the new i2c_dw_shutdown() hook,
allowing the controller to gracefully NACK controllers requests during
system shutdown.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260527-dw-i2c-v5-3-3483057f8d67@wkennington.com
Convert the PCI driver to use the new i2c_dw_shutdown() hook, allowing
the controller to gracefully NACK controller requests during system
shutdown.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260527-dw-i2c-v5-2-3483057f8d67@wkennington.com
Introduce an exported shutdown function to safely shutdown the
DesignWare I2C controller.
This shutdown hook gracefully sets the target disable bit before disabling
the controller. This guarantees that any incoming requests from the
controller are immediately NACKed during shutdown, preventing the bus from
hanging.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260527-dw-i2c-v5-1-3483057f8d67@wkennington.com
Using named initializers is more explicit and thus easier to parse for a
human.
While touching this array, drop explicit zeros from the list terminator.
This change doesn't introduce changes to the compiled zorro_device_id
array.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Max Staudt <max@enpas.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/3d7690c7a8948f977d6c50bd0c8010efb715fbdc.1779803053.git.u.kleine-koenig@baylibre.com
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled array, only its representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260519093806.1567914-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Convert the Texas Instruments DaVinci and Keystone I2C controller
bindings from legacy text format to modern dt-schema (YAML).
During the conversion, the `interrupts` property was made required
to match the strict requirement in the driver probe function. The
custom `ti,has-pfunc` and `power-domains` properties were also
properly defined to match SoC-specific hardware features.
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260513123758.4955-1-chaitanya.msabnis@gmail.com
The direction of a single-ended (open-drain or open-source) GPIO line
cannot always be reliably determined by reading hardware registers.
In true open-drain implementations, the "high" state is achieved by
entering a high-impedance mode, which many hardware controllers report
as "input" even if the software intends to use it as an output.
This creates issues for consumer drivers (like I2C) that rely on
gpiod_get_direction() to decide if a line can be driven.
Introduce gpiod_is_single_ended() to allow consumers to check the
software configuration (GPIO_FLAG_OPEN_DRAIN/GPIO_FLAG_OPEN_SOURCE) of
a descriptor. This provides a robust way to identify lines that are
capable of being driven, regardless of their instantaneous hardware state.
Signed-off-by: Jie Li <jie.i.li@nokia.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260511113726.49041-2-jie.i.li@nokia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Use new PM_RUNTIME_ACQUIRE() and PM_RUNTIME_ACQUIRE_ERR() wrapper macros
to make the code look more straightforward.
No intentional functional impact.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Acked-by: Mika Westerberg <mika.westerberg@linx.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260417075451.5435-1-luoxueqin@kylinos.cn
This I2C module is integrated into the Loongson-2K0300 SoCs.
It provides multi-master functionality and controls all I2C bus-specific
timing, protocols, arbitration, and timing. It supports both standard
and fast modes.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/c5a6c4e5ea675410ff1b946b988c280c22bf3dc4.1776135865.git.zhoubinbin@loongson.cn
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----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=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----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=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode
-----BEGIN PGP SIGNATURE-----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=mY/t
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
mentioning separately: Rafael's commit converting tpm_crb from ACPI driver
to a platform driver. Starting from this release cycle, the branch with TPM
changes mirrored to next is 'for-next-tpm', and patches for keys have their
own separate 'for-next-keys' branch.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaezVbgAKCRAaerohdGur
0ggHAQDmhaZ2C3ddAV1WjfXh1YqdWAmqEqoP7ZHAh4OrjyRPTQD+Pc4xl9TSOgHx
/9WzzV6AM6fL5RuC2/PO5RvOKF9mswc=
=tpJM
-----END PGP SIGNATURE-----
Merge tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736a ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Several development updates for 7.1-rc1:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
-----BEGIN PGP SIGNATURE-----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=arB6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of
the saved ring buffer. This is because the ring buffer being read by
user space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other accounting
as well. On boot up, the "reader page" is accounted for but a rewind may
put it back into the buffer and then the reader page may be accounted
for again.
Save off the original reader page and skip accounting it when scanning
the pages in the ring buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaevLRxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsNBAQCO9T+3kbDLD/DxRBYjeMXhTg2iY2OV
SHV9jEzcYTahmwEAqVCFY9sNxVYXait/C924SmHCSi1N0HrIuEzIEd29iwk=
=bv+t
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of the
saved ring buffer. This is because the ring buffer being read by user
space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other
accounting as well. On boot up, the "reader page" is accounted for
but a rewind may put it back into the buffer and then the reader page
may be accounted for again.
Save off the original reader page and skip accounting it when
scanning the pages in the ring buffer.
* tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not double count the reader_page
