During F55 sensor detection, the transmitter (TX) electrode count was
incorrectly assigned the value of the receiver (RX) electrode count
due to copy-paste typos.
This incorrect value was then propagated to the driver data and used
by F54 to determine the diagnostics report size. On devices with more
RX than TX electrodes, this inflated the perceived TX count, leading
to incorrect report size calculations and potential out-of-bounds
buffer accesses.
Fix the typos by correctly assigning the TX electrode counts.
Fixes: 6adba43fd2 ("Input: synaptics-rmi4 - add support for F55 sensor tuning")
Fixes: c762cc68b6 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54")
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In sctp_process_asconf(), when sctp_make_asconf_ack() fails to allocate
the ASCONF_ACK chunk due to memory pressure, the code jumps to the
done label where asoc->peer.addip_serial is unconditionally incremented.
This leaves the peer's ASCONF (serial N) unacknowledged while the local
endpoint now expects serial N+1. When the peer retransmits serial N, it
falls into the serial < addip_serial + 1 branch ,
which attempts to look up a cached ACK for serial N. No cached ACK
exists since the allocation failed, so the retransmission is silently
discarded. The peer eventually times out and ABORTs the association.
Move the addip_serial increment inside the if (asconf_ack) block so that
the serial number is only advanced when the ASCONF_ACK is successfully
created and cached. This way, on allocation failure, the serial number
is unchanged and the peer's retransmitted ASCONF will be correctly
re-processed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260804025514.241767-1-l1138897701@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Callers of migrate_pages() should adjust NR_MIGRATED_{ANON,FILE} for
isolations and putback of the folios. That for migration succeeded folios
is done by migrate_pages(), in migrate_folio_done(). That for MR_DEMOTION
reason is an exception though.
DAMOS_MIGRATE_{HOT,COLD} call migrate_pages() but mistakenly not doing the
stat adjustment. As a result, use of DAMOS_MIGRATE_{HOT,COLD} could
corrupt the stat. It could confuse too_many_isolated(), make compaction
and reclaim to behave in unexpected ways. The stat corruption can be
reproduced and confirmed using DAMON user-space tool [1] on NUMA systems,
like below.
$ numactl --hardware
available: 2 nodes (0-1)
[...]
$ sudo ./damo start --damos_action migrate_hot 1
$ sudo cat /proc/sys/vm/stat_refresh
$ sudo dmesg
[...]
[ 80.215554] vmstat_refresh: nr_isolated_anon -5578
[ 80.216842] vmstat_refresh: nr_isolated_file -34400
This issue was discovered [2] by Sashiko.
Link: https://lore.kernel.org/20260728140404.94476-1-sj@kernel.org
Link: https://github.com/damonitor/damo [1]
Link: https://lore.kernel.org/20260726164356.87940-1-sj@kernel.org [2]
Fixes: b51820ebea ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: <stable@vger.kernel.org> # 6.11.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_pa_migrate() and damos_va_migrate() isolate folios into a local list
and then call damon_migrate_pages(). When target_nid is invalid
(including the scheme default NUMA_NO_NODE / -1), damon_migrate_pages()
returns early without putting the folios back to the LRU.
Callers then discard the list head while those folios remain isolated with
an extra reference taken by folio_isolate_lru(). The pages stay off the
LRU for as long as the mapping exists (anon active+inactive counts drop
while RSS does not), and the leftover references can pin the pages after
the mapping is gone.
Put the folios back on the invalid-nid path so ignored migration requests
still return them to the LRU.
Link: https://lore.kernel.org/20260726014815.1280757-1-dayou5941@163.com
Fixes: 7e6c313069 ("mm/damon/ops-common: ignore migration request to invalid nodes")
Assisted-by: Cursor:grok-4.5
Reviewed-by: SJ Park <sj@kernel.org>
Signed-off-by: liyouhong <liyouhong@kylinos.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but
__folio_split() leaves the xa_state's xa_lru unset. That lets a live,
memcg-charged xa_node exist without being linked into the mapping's
shadow_nodes list_lru; when reclaim later walks the list_lru it trips
VM_WARN_ON(!css_is_dying()).
Use mapping_set_update() to install both the workingset update callback
and the shadow_nodes list_lru on the xa_state.
Link: https://lore.kernel.org/20260725101419.3938406-1-matt@readmodwrite.com
Fixes: 58729c04cf ("mm/huge_memory: add buddy allocator like (non-uniform) folio_split()")
Signed-off-by: Matt Fleming <mfleming@cloudflare.com>
Reported-by: syzbot+c5b060ce82921a2fd500@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c5b060ce82921a2fd500
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nico Pache <npache@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
page_table_check_set() and page_table_check_clear() account mappings based
on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special
mappings, but page_table_check can still account them as file-backed
pages.
An unprivileged process can populate enough zero mappings to overflow
file_map_count and hit the existing BUG_ON(). The PTE path can do this
with the shared zero page, and the PMD path can do the same with huge zero
mappings.
Skip special zero mappings in the user page-table accounting paths. Keep
the PTE-side pte_special() check, and identify huge zero PMDs from the
mapped folio instead of pmd_special(). That covers architectures where
pmd_special() is a no-op without adding huge_zero_pfn checks to the
generic counter helpers.
Link: https://lore.kernel.org/cover.1784717203.git.zhilinz@nebusec.ai
Link: https://lore.kernel.org/e94478e4fb7912fb7e8ebebed5ce85d00dc9a69d.1784717203.git.zhilinz@nebusec.ai
Fixes: df4e817b71 ("mm: page table check")
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reported-by: Vega <vega@nebusec.ai>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Assisted-by: Codex:gpt-5.4
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT calls damon_call() for commit_inputs parameter user input
if the DAMON context is initialized. The context could be initialized,
but not yet successfully started. In the case, damon_call() could
indefinitely hang. Read the comment on damon_call() for more detail. Fix
the problem by memorizing if the DAMON context has ever successfully
started, and skip damon_call() if it has not.
This issue can easily be reproduced by writing Y to the commit_inputs
parameter file on a system that DAMON_LRU_SORT has not turned on before.
Link: https://lore.kernel.org/20260803134646.16640-3-sj@kernel.org
Fixes: de3c60e1c8 ("mm/damon: add synchronous commit for commit_inputs")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Liew Rui Yan <aethernet65535@gmail.com>
Cc: <stable@vger.kernel.org> # 7.2.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/{reclaim,lru_sort}: fix commit_inputs infinite
hang".
Writing 'Y' to commit_inputs parameters of DAMON_RECLAIM and
DAMON_LRU_SORT before the modules were ever turned on causes infinite
hang. Fix those.
The issue was discovered [1] by Sashiko.
This patch (of 2):
DAMON_RECLAIM calls damon_call() for commit_inputs parameter user input if
the DAMON context is initialized. The context could be initialized, but
not yet successfully started. In the case, damon_call() could
indefinitely hang. Read the comment on damon_call() for more detail. Fix
the problem by memorizing if the DAMON context has ever successfully
started, and skip damon_call() if it has not.
This issue can easily be reproduced by writing Y to commit_inputs on a
system that DAMON_RECLAIM was not turned on before.
Link: https://lore.kernel.org/20260803134646.16640-1-sj@kernel.org
Link: https://lore.kernel.org/20260803134646.16640-2-sj@kernel.org
Link: https://lore.kernel.org/20260802173021.762-1-sj@kernel.org [1]
Fixes: de3c60e1c8 ("mm/damon: add synchronous commit for commit_inputs")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Liew Rui Yan <aethernet65535@gmail.com>
Cc: <stable@vger.kernel.org> # 7.2.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damos_quota_score() can trigger division by zero if the target value is
zero. DAMON_LRU_SORT lets users set the target value for the hot memory
scheme via active_mem_bp parameter. It avoids setting it as the target
value if the parameter value is zero. However, it also sets the cold
memory scheme with a target value that is calculated as '10000 -
active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold
memory scheme's quota goal target value can be zero. As a result,
division by zero can be triggered. Fix by returning an error when the
user tries to start DAMON with >10000 active_mem_bp parameter value.
It makes no sense to set active_mem_bp with 10002. It also requires
module parameters write permission to reproduce the issue. That said, the
consequence is quite bad.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_lru_sort/parameters
# echo 1000 > wmarks_high
# echo 995 > wmarks_mid
# echo 0 > wmarks_low
# echo 10002 > active_mem_bp
# echo Y > enabled
# dmesg -w
[...]
[ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI
[ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480
This issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260803134034.15217-3-sj@kernel.org
Link: https://lore.kernel.org/20260801213028.5127-1-sj@kernel.org [1]
Fixes: 40d98d31cd ("mm/damon/lru_sort: support active:inactive memory ratio based auto-tuning")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 7.0.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: avoid division by zero from damos_quota_score()".
DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division
by zero in damos_quota_score(). Avoid it by adding parameters validation
checks.
This patch (of 2):
damos_quota_score() can trigger division by zero if the target_value is
zero. DAMON_SAMPLE_MTIER lets users set the target_value via
node0_mem_{used,free}_bp parameters. It doesn't guard zero value case,
though. As a result, users can trigger division by zero. Fix the issue
by returning an error when the user tries to start DAMON with zero
node0_mem_{used,free}_bp parameter values.
DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite
bad. Also the zero node0_mem_free_bp parameter might look like a
reasonable setup to some users. Hence, the issue might really happen in
the real world.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_sample_mtier/parameters
# echo 4096 > node0_start_addr
# echo 8192 > node0_end_addr
# echo 8192 > node1_start_addr
# echo 81920 > node1_end_addr
# echo 0 > node0_mem_free_bp
# echo Y > enabled
# dmesg -w
[...]
[18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480
[...]
This issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260803134034.15217-1-sj@kernel.org
Link: https://lore.kernel.org/20260803134034.15217-2-sj@kernel.org
Link: https://lore.kernel.org/20260801202657.117135-1-sj@kernel.org [1]
Fixes: c5e67d40a1 ("samples/damon/mtier: add parameters for node0 memory usage")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.17.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Map my old jiaxyga.com and ProtonMail addresses to the current
mainlining.org address.
Link: https://lore.kernel.org/20260801153333.296218-1-danila@mainlining.org
Signed-off-by: Danila Tikhonov <danila@mainlining.org>
Cc: Jakub Kacinski <kuba@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than mixing the refcounted and non-refcounted
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic, separate the two out cleanly so
it is clear what happens when this configuration option is set and what
happens when it is not.
Introduce HUGE_ZERO_UNSET_PFN to abstract the ~0UL assignment, only
introduce the refcount, lock and shrinker if
!CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, abstract initialisation and teardown,
abstract the huge zero folio allocation from refcounting.
Also change a BUG_ON() to WARN_ON_ONCE() while we're at it.
No functional change intended.
Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-2-c5d8a41b317f@kernel.org
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Fixes: 3b77e8c8cd ("mm/thp: make is_huge_zero_pmd() safe and quicker")
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand (Arm) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Hengbin Zhang <uqbarz@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kiryl Shutsemau <kas@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/huge_memory: fix huge_zero_pfn race", v2.
There is a subtle race in the reference-counted huge_zero_folio
implementation.
The fast path atomic logic fails to account for the fact that the shrinker
(which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn
with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a
racing get_huge_zero_folio() installed a valid value there.
This results in huge_zero_folio being correctly set but huge_zero_pfn
being set incorrectly and thus is_huge_zero_pfn() and consequently
is_huge_zero_pmd() will misidentify the huge zero folio as being an
ordinary THP folio.
This can result in the huge zero folio being split and otherwise treated
incorrectly.
The solution to this is very subtle as there is an atomic fast path, and
thus ordering in weakly ordered architectures has to be treated very
carefully.
The first commit fixes the issue by introducing a spinlock around
huge_zero_[pfn, folio, refcount] write, with careful consideration paid to
load/store ordering in the fast path. It is placed first and kept as
small as possible so that it can be backported on its own.
The second commit is a pure cleanup which reworks the
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic to better separate the persistent
logic from the dynamically allocated one.
This patch (of 2):
If !CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, the huge_zero_folio is refcounted
by huge_zero_refcount and returned by mm_get_huge_zero_folio().
When the caller is done with the huge zero page, its reference count is
decremented. Only a shrinker can set the reference count to zero.
A race can unfortunately occur between a shrinker decrementing the
reference count to zero and a concurrent page fault.
This is because shrink_huge_zero_folio_scan() might, if very unlucky, be
preempted between setting huge_zero_refcount to zero and writing an
invalid value.
During this time get_huge_zero_folio() could write to huge_zero_pfn before
shrink_huge_zero_folio_scan() resumes.
In this event the huge zero folio will be persistently misidentified
causing the THP code path to be entered inappropriately for the huge zero
folio:
CPU 0 CPU 1
=======================================|=================================
shrink_huge_zero_folio_scan() |
atomic_cmpxchg() sets refcount to 0 |
xchg() sets huge_zero_folio to NULL | get_huge_zero_folio()
| | atomic_inc_not_zero() -> zero
preempted for a long time | Allocate new huge zero folio
| | Write valid huge_zero_folio
v | Write valid huge_zero_pfn
Overwrite huge_zero_pfn with ~0UL <--- Invalid overwrite!
This results in is_huge_zero_pfn() and is_huge_zero_pmd() incorrectly
returning false for a huge zero page which could result in issues like the
huge zero folio being incorrectly split.
Note that the issue is with huge_zero_pfn not huge_zero_folio, as
get_huge_zero_folio() uses cmpxchg() gated on huge_zero_folio being NULL
with a retry loop and shrink_huge_zero_folio_scan() uses xchg() to set
huge_zero_folio.
Fix the issue by introducing a spinlock, huge_zero_lock, to prevent
concurrent write of huge_zero_folio, huge_zero_pfn and huge_zero_refcount.
There needs to be significant care taken here to ensure correctness:
The fast path in get_huge_zero_folio() uses atomic_inc_not_zero(), which
is outside of the critical section, and means huge zero allocation is
gated on zero huge_zero_refcount.
The fast path doesn't use huge_zero_lock, so the critical section is
irrelevant to it.
So invariants are required - huge_zero_refcount MUST:
* Only be set in the huge_zero_lock critical section to ensure
serialisation of huge_zero_pfn, huge_zero_folio and huge_zero_refcount
writes.
* Be set non-zero only AFTER huge_zero_[pfn, folio] are set to valid values
so installation of the huge zero folio on read page fault ensures
concurrent is_huge_zero_*() calls correctly identify the huge zero folio.
* Be set zero only BEFORE huge_zero_[pfn, folio] are set to NULL and ~0UL
respectively, and atomically.
Establish these by:
* Only setting huge_zero_refcount to zero or an absolute value in the
huge_zero_lock critical section in get_huge_zero_folio() and
shrink_huge_zero_folio_scan(), and always updating atomically there
and elsewhere.
* Using atomic_set_release(&huge_zero_refcount) in get_huge_zero_folio()
after huge_zero_[pfn, folio] are set. This is paired with
atomic_inc_not_zero() to ensure atomic_inc_not_zero() only observes a
non-zero value if huge_zero_[pfn, folio] are set.
* Using atomic_cmpxchg() in shrink_huge_zero_folio_scan() (as before) to
ensure that it is set zero only when equal to 1 and set atomically.
* atomic_cmpxchg() being fully ordered ensures this is done prior to
huge_zero_[folio, pfn] being set to NULL and ~0UL respectively.
Eliminate the retry loop in get_huge_zero_folio() as the atomic_cmpxchg()
in shrink_huge_zero_folio_scan() is now performed under the lock, and
replace with an equally locked atomic_inc() to set the reference count
should the caller be raced on huge zero folio installation.
folio_put() naturally implies a full memory barrier so its ordering is
maintained correctly.
The huge zero folio also cannot be released except when the shrinker does
so as it is non-LRU and non-rmappable.
Note that only the huge zero shrinker (via shrink_huge_zero_folio_scan())
can actually set huge_zero_refcount to zero, which is the count of mm's
which have at least one huge zero folio installed plus one shrinker pin.
Additionally convert a BUG_ON() to a VM_WARN_ON_ONCE().
Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-0-c5d8a41b317f@kernel.org
Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-1-c5d8a41b317f@kernel.org
Fixes: 3b77e8c8cd ("mm/thp: make is_huge_zero_pmd() safe and quicker")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reported-by: Hengbin Zhang <uqbarz@gmail.com>
Closes: https://lore.kernel.org/linux-mm/20260727154001.4102341-1-uqbarz@gmail.com/
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kiryl Shutsemau <kas@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switch my entry in MAINTAINERS and .mailmap to my @linux.dev email address
Link: https://lore.kernel.org/20260729-email-change-v1-1-666ae7c2b7fc@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Brendan Jackman <brendan.jackman@linux.dev>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is
applied repeatedly: each application modifies xas.xa_index, rounding it
down according to the split_order attempted at that stage: and if all goes
as intended, it eventually (or immediately) converges on an
xas_try_split() to the required folio_order, with xas.xa_index now the
same as index: then xas_store() puts the new folio into the xarray there.
But if a new node was needed, and GFP_NOWAIT allocation did not get one,
the lock is dropped, xas_nomem() used to allocate, and sequence retried.
If (that part of) the xarray is unchanged when the lock is reacquired, no
problem. But what if the conflict was meanwhile resolved by another
thread (perhaps even doing the same thing, inserting a folio at that same
index)? Isn't there a danger of now putting our folio into the xarray at
an intermediate rounded-down index? With !folio_contains() bug to follow,
when CONFIG_DEBUG_VM=y is checking for that.
Fix this with an xas_set_order() to restore the original xas.xa_index at
the bottom of the loop, so the retry does a full re-evaluation after
reacquiring the lock, and cannot reach xas_store() with the wrong index.
Production was suffering from rare SIGILLs and SIGSEGVs, executable text
found a page away from where it belonged, !folio_contains() bug hit when
debug enabled: symptoms not seen since this patch went in.
Link: https://lore.kernel.org/562fbfa6-dd6d-0b6a-2461-ed2ff1173bc8@google.com
Fixes: 200a89c159 ("mm/filemap: use xas_try_split() in __filemap_add_folio()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Chris J Arges <carges@cloudflare.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
microblaze handles TLB misses in software, and the handler builds the
address of the L1 entry by ORing the index into the page directory base
instead of adding it (hw_exception_handler.S):
bsrli r5, r3, PGDIR_SHIFT - 2
andi r5, r5, PAGE_SIZE - 4
/* Assume pgdir aligned on 4K boundary, no need for
"andi r4,r4,0xfffff003" */
or r4, r4, r5
lwi r4, r4, 0 /* Get L1 entry */
The index is masked to the low 12 bits, so the OR only works if those bits
of the base are zero -- which is exactly the assumption the comment states
and the reason the masking of the base can be skipped.
swapper_pg_dir had no alignment directive of its own. It was aligned
because it followed empty_zero_page in head.S, and that one carried the
.align 12:
.section .data
.global empty_zero_page
.align 12
empty_zero_page:
.space PAGE_SIZE
.global swapper_pg_dir
swapper_pg_dir:
.space PAGE_SIZE
Commit 6215d9f447 ("arch, mm: consolidate empty_zero_page") removed
empty_zero_page from head.S, and with it the .align 12 that -- despite
sitting next to empty_zero_page -- was what page aligned swapper_pg_dir.
Since then swapper_pg_dir lands wherever .data happens to put it, its low
bits are no longer zero, and every kernel TLB miss ORs the index into a
base with a nonzero offset. The resulting L1 lookups read the wrong
words, no valid translation is ever installed, and the kernel spins in
exceptions long before it can print anything. On qemu-system-microblazeel
(petalogix-s3adsp1800) the console stays completely silent at 100% CPU;
there is no oops and no guest error reported by qemu, which makes this
awkward to diagnose.
Give swapper_pg_dir the alignment it requires, rather than relying on a
neighbour to provide it.
microblaze has no noMMU variant left in mainline -- CONFIG_MMU is def_bool
y and mmu_defconfig is the only defconfig -- so this is not a corner case:
every mainline microblaze kernel since v7.1-rc1 fails to boot, including
the v7.1 release.
v7.0: swapper_pg_dir = 0xc05fd000 (aligned)
v7.1-rc1: swapper_pg_dir = 0xc0603140 (offset 320)
v7.1-rc1 + this fix: swapper_pg_dir = 0xc0604000 (aligned)
next-20260726: swapper_pg_dir = 0xc0615140 (offset 320)
next-20260726 + this fix: swapper_pg_dir = 0xc0616000 (aligned)
Verified on qemu-system-microblazeel (petalogix-s3adsp1800) with
mmu_defconfig and microblazeel gcc 12.5.0: v7.1-rc1 and next-20260726 both
print nothing at all without the fix, and both boot to userspace with it.
Link: https://lore.kernel.org/20260727215823.1422701-1-ramin.moussavi@yacoub.de
Fixes: 6215d9f447 ("arch, mm: consolidate empty_zero_page")
Signed-off-by: Ramin Moussavi <ramin.moussavi@yacoub.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This partially reverts commit fa93b45fd3 ("arm64: Enable vmalloc-huge
with ptdump"), retaining vmalloc-huge support but eliminating the now
redundant mitigation against a race between huge vmap page table freeing
and ptdump, as this issue has now been fixed at core.
We also simultaneously remove the arm64 if-deffery when acquiring the mmap
read lock upon vmap huge page table promotion as it is no longer required.
Note that this patch relies on the preceding vmalloc patch, and should not
be backported alone.
Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-5-8cc77dcc0018@kernel.org
Fixes: fa93b45fd3 ("arm64: Enable vmalloc-huge with ptdump")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Carlier <devnexen@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previous commits have established the invariant that kernel page table
freeing is performed while an mmap read lock on init_mm is held, which
fixes races between ptdump and kernel page table freeing over init_mm.
However, x86 and arm64 can perform a ptdump over an mm other than init_mm
via ptdump_walk_pgd() and since kernel memory ranges are shared across
non-kernel mm's, this means that the race still exists for these cases.
Fix this by acquiring a nested mmap write lock for init_mm in
ptdump_walk_pgd().
This is safe as we take this after mmap write locking the mm, and nothing
acquires the init_mm lock first before locking an arbitrary mm, so no
deadlock is possible.
Also update walk_page_range_debug() to assert that init_mm is write
locked, add a comment explaining why and remove some redundant code, and
eliminate the unnecessary and confusing invocation of
walk_kernel_page_table_range().
We can safely remove the non-NULL check for walk.mm, as the mmap lock
asserts would NULL pointer deref if it was (and of course no callers do
this).
The first point at which ptdump can race kernel page table freeing is
commit b6bdb7517c ("mm/vmalloc: add interfaces to free unmapped page
table"), so we target this in the Fixes tag.
Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-4-8cc77dcc0018@kernel.org
Fixes: b6bdb7517c ("mm/vmalloc: add interfaces to free unmapped page table")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Carlier <devnexen@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable
freeing", v6.
Kernel page table walkers fall into two broad categories - those ranges
where no exclusion is required via walk_kernel_page_table_range_lockless()
and those where exclusion is required via walk_kernel_page_table_range()
or walk_page_range_debug().
The former category is used only by arm64 arch code operating on ranges it
both wholly owns and does not concurrently write.
The latter category consists of kernel page table walkers operating on
ranges that are wholly owned (but which need exclusion against concurrent
writers).
The lock used for exclusion is the mmap lock, and for kernel ranges this
is the mmap lock on init_mm.
ptdump is a special case being both the only user of
walk_page_range_debug(), and the only case in which it walks ranges it
does not own.
This presents a problem, as page tables may be freed under ptdump. And
indeed there is a use-after-free bug in the kernel as a result, which this
series addresses.
vmap promotes page tables to huge leaf entries where possible, freeing the
lower page table when it does. It does this with no meaningful locks held
against concurrent ptdump walks.
As a result, use-after-free can currently occur. This series addresses
the issue by having the vmap huge promotion logic acquire the mmap read
lock while both setting the huge page table entry and freeing the prior
leaf page table.
The ptdump code already acquires the mmap write lock, so by doing so we
ensure that the ptdump walker only ever observes either the huge page
table entry or the existing page table entry, and nothing is freed
underneath it.
A mitigation for this issue was already applied for arm64 in commit
fa93b45fd3 ("arm64: Enable vmalloc-huge with ptdump"), which this series
has to deal with carefully.
This mitigation resolves the issue by acquiring the mmap read lock on
init_mm on vmap page table free if a ptdump is in progress.
However the fix in this series would cause a deadlock if we were to simply
apply it for arm64 without also reverting the change.
This is because vmap may acquire the read lock before ptdump attempts to
acquire the write lock, which then gets queued, and rwsem starvation rules
mean that the (unacknowledged) nested mmap read lock in the arm64 code
would also block, meaning the original read lock is never released and
thus deadlock.
This series works around this by #ifndef CONFIG_ARM64'ing the mmap read
lock in vmap logic, then partially reverting commit fa93b45fd3 ("arm64:
Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap
support, and removing the ifdeffery with the partial revert patch.
There are related issues that are also addressed in this series:
* x86 page attribute logic, specifically Change Page Attributes (CPA),
implements a feature whereby huge ranges can be collapsed into huge leaf
entries. This can similarly cause a UAF when done in parallel with a
ptdump walk, so similarly acquire the init_mm mmap lock to avoid this.
* The CPA logic allows concurrent page table manipulation and CPA
collapse, meaning the former risks accessing a page table the latter
frees. Fix this by acquiring mmap write lock on init_mm across the
whole CPA collapse operation and read lock on the page table
manipulation.
* x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm
walks, and in x86's case arbitrary mm's), so we ensure kernel mappings
remain stable by locking the init_mm as well as the mm being walked.
The ordering of patches is established for both strict dependencies (the
arm64 partial revert in particular has to be done after the vmap changes)
and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA
fixes are in place).
This patch (of 3):
Currently there is a nasty race between ptdump and vmap when attempting to
map a huge P4D, PUD or PMD entry:
* ptdump walks kernel page table ranges it doesn't own.
* When vmap maps ranges it tries to promotes existing ones to huge page
tables in vmap_try_huge_[p4d,pud,pmd]() at P4D, PUD and PMD level,
freeing the lower page table in [p4d,pud,pmd]_free_[pud,pmd,pte]_page()
when it succeeds.
Both of these things can happen at the same time and as a result ptdump
can access a freed page table, resulting in a use-after-free and memory
corruption.
This is possible because while ptdump_walk_pgd() holds both the mem
hotplug lock and the mmap write lock before invoking
walk_page_range_debug(), vmap takes no relevant locks at all.
Fix this by holding the mmap read lock in vmap_try_huge_*() when freeing
page tables.
The read lock is sufficient: ptdump is the only walker that must be
excluded and it holds the mmap write lock. Other holders of the read lock
may run concurrently, but each exclusively owns the range it operates on
and cannot reach the page tables freed here.
We also hold the lock while assigning the huge page table entry, which
means page table walkers observe only the huge or non-huge page table
entry.
We use a trylock to prevent ptdump from blocking vmap making forward
progress. This is fine because it's an optimisation in any case, and thus
the vmap can safely proceed regardless.
All other kernel page table walkers that touch vmalloc ranges either
exclusively own the memory walked or acquire the mmap lock, so this
correctly excludes those walkers.
One wrinkle here is commit fa93b45fd3 ("arm64: Enable vmalloc-huge with
ptdump"), which addresses the issue for arm64 only by explicitly acquiring
the mmap read lock on kernel page table freeing should a concurrent ptdump
be in progress.
This is problematic as vmap may acquire the mmap read lock prior to ptdump
attempting to acquire an mmap write lock, leading to a deadlock when the
mmap read lock is slept upon on page table freeing due to rwsem
anti-starvation.
We work around this by predicating the mmap lock being taken on
!CONFIG_ARM64 for the time being.
With this patch applied, a follow up will partially revert commit
fa93b45fd3 ("arm64: Enable vmalloc-huge with ptdump") and at that stage
remove the arm64 ifdeffery.
We also update walk_page_range_debug() to assert the mmap write lock
unconditionally and update the comment here to reflect this change.
The issue has existed as long as ptdump was available and vmap freed page
tables when promoting to a huge leaf entry, that is, since commit
b6bdb7517c ("mm/vmalloc: add interfaces to free unmapped page table")
for huge ioremap, and commit 121e6f3258 ("mm/vmalloc: hugepage vmalloc
mappings") for huge vmalloc.
Since the former is the earlier of the two we choose that for our Fixes
tag.
We also define a guard class for mmap_read_trylock() so we can use
cleanup.h to make the scope handling cleaner in the implementation.
This patch is based on work by David Carlier (linked), with gratitude!
Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-0-8cc77dcc0018@kernel.org
Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-1-8cc77dcc0018@kernel.org
Fixes: b6bdb7517c ("mm/vmalloc: add interfaces to free unmapped page table")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reported-by: syzbot+fd95a72470f5a44e464c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6a287988.39669fcc.33b062.00a0.GAE@google.com/T/
Link: https://lore.kernel.org/linux-mm/20260706203128.162335-1-devnexen@gmail.com/
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michael Chan says:
====================
bnxt_en: Bug fixes
This series include 3 bug fixes:
1. queue start bug fix on the VNIC's default ring. 2 refactoring
patches preceed the actual bug fix.
2. Bug fix for TPA data corruption seen on some ARM systems.
3. PTP PPS setting bug fix.
====================
Link: https://patch.msgid.link/20260731190937.807270-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing driver logic is always turning on PTP_CLK_REQ_PPS
regardless of the "on" parameter passed to bnxt_ptp_enable().
During shutdown, PTP_CLK_REQ_PPS may be turned off and this
bug will do the opposite and may trigger a PCIe PTM request TLP.
On some systems this can trigger a PCIe AER.
Fix it by properly configuring PTP_CLK_REQ_PPS based on the "on"
parameter.
Fixes: 9e518f2580 ("bnxt_en: 1PPS functions to configure TSIO pins")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Keegan Freyhof <keegan.freyhof@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EOP (End of frame padding) on the AGG ring may cause overlapping of
zero padding at the end of one segment with the next segment's data.
If Relaxed Ordering (RO) is enabled, the zero padding may overwrite
valid data in the next segment and corrupt the data. Older chips
(P5 and older) do not automatically disable RO when EOP is enabled.
On some ARM systems, data corruption was reported on 57508 (P5)
chips with RO enabled.
Always disable EOP on all chips on the AGG rings when TPA is enabled
to fix the data corruption.
Fixes: bfcd8d791e ("bnxt_en: Add fast path logic for TPA on 57500 chips.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a queue is restarted, refresh VNIC_CFG for all VNICs whose
default RX ring is the restarted ring. This will eliminate this
possible FW warning caused by a stale default ring in the VNIC:
FW reported unknown error type 10
Fixes: 5ac066b7b0 ("bnxt_en: Fix queue start to update vnic RSS table")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each VNIC has a default RX ring. The purpose of the default RX ring
is to provide a destination for any packets that cannot be parsed by
the RSS logic. Up until now, the default RX ring is always Ring 0.
We neglected to take care of this default RX ring when adding the
queue restart feature. If ring 0 (default ring) is re-started, it
may now have a new FW ring ID after freeing the old one and
allocating a new one. The VNIC now may have a stale default ring
and it may generate an internal exception. This exception may
appear in dmesg:
FW reported unknown error type 10
The best way to resolve this issue is to use a more appropriate
ring for the default ring instead of always ring 0. Ring 0 may not
even be in the RSS table, especially on a new RSS context.
This patch adds the logic to determine and store the proper default
RX ring for a VNIC. For an RSS VNIC, the default ring is the lowest
ring number in the RSS table. The next patch will add proper logic
to update the VNIC if the default ring changes after queue restart.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a refactor patch with no change in behavior. The caller
will now fill the RSS table before calling __bnxt_hwrm_vnic_set_rss().
In the next patch, we'll add code to determine the default ring for
the VNIC when we fill the RSS table.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_queue_start() deactivates and re-activates all channels but closes
only the queue being restarted. mlx5e_activate_txqsq() then
unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters
of channels that kept their in-flight TX WQEs. The next completion then
over-charges and trips the BUG_ON() in dql_completed():
kernel BUG at lib/dynamic_queue_limits.c:99!
RIP: 0010:dql_completed+0x23d/0x280
Call Trace:
<IRQ>
mlx5e_poll_tx_cq+0x668/0xa60
mlx5e_napi_poll+0x5b/0x7b0
net_rx_action+0x15a/0x580
Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc).
In the case that reset is skipped, the outstanding WQEs will eventually
complete and rebalance the dql. The dql->limit is carried across the
reset.
Fixes: b2588ea40e ("net/mlx5e: Implement queue mgmt ops and single channel swap")
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260803-mlx5-bql-v3-1-a30d4c66fe1d@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ovs_flow_cmd_new() preallocates the optional reply skb before it takes
ovs_mutex and before it knows which existing flow will be updated.
That is normally fine because the skb is sized from the request flow
identifier. That identifier also becomes the inserted flow's identifier.
For updates, however, a request with a UFID may miss the UFID lookup and
then fall back to the flow key lookup. That lookup can legitimately find
an existing key-identified flow. UFIDs are optional and the flow key is
the primary identifier.
For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's
identifier, not the request identifier used for the preallocation. A short
request UFID can therefore leave too little room for the key identifier.
The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the
update path.
Once the update target has been resolved, reallocate the reply skb if the
matched flow needs a larger reply than the request identifier allowed. Do
this before replacing the actions so the request can still fail cleanly if
the rare extra allocation fails.
Fixes: 74ed7ab926 ("openvswitch: Add support for unique flow IDs.")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/f7bbd3c30ce81a39156e226b3872d73abed21d2f.1785644623.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
usbnet_probe() initializes max_mtu to ETH_MAX_MTU and only caps it
inside the if (info->bind) block. Drivers without a bind callback
never enter this block, so max_mtu stays at ETH_MAX_MTU.
QEMU's usb-net device (0x0525/0xa4a2) is claimed by the cdc_subset
driver which has no bind callback. The guest accepts any MTU from DHCP
(e.g. 65520 from passt), leading to TCP segments that exceed the
device's 2048-byte receive buffer and are silently dropped.
Initialize max_mtu to net->mtu at probe time and update it inside
the bind block.
Fixes: f77f0aee4d ("net: use core MTU range checking in USB NIC drivers")
Cc: jarod@redhat.com
Cc: stable@vger.kernel.org
Link: https://gitlab.com/qemu-project/qemu/-/issues/3268
Link: https://bugs.passt.top/show_bug.cgi?id=189
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://patch.msgid.link/20260731092711.857684-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnge_fix_rings_count() returns 0 on success or a negative errno on failure
However, bnge_adjust_rings() stores its return value in a u16 variable,
causing negative error codes such as -ENOMEM to be converted to a large
positive value.
Use an int for the return code variable so that error values are
preserved and propagated correctly.
Fixes: 627c67f038 ("bng_en: Add resource management support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Link: https://patch.msgid.link/20260801100923.1498570-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yangyu Chen says:
====================
net: atlantic: fix two ring teardown leaks
These are the two fixes from the page_pool conversion series [1],
resent against net as requested in the review of that series. The
page_pool conversion itself stays in net-next and is not part of this
posting; it depends on these fixes, but they stand on their own.
Both patches are unchanged from [1] apart from the collected
Reviewed-by tags, and each carries a Fixes tag and a Cc: stable with
the affected range (patch 1: v4.11+, patch 2: v5.2+). They apply and
were build- and runtime-tested independently of each other and of the
conversion.
Patch 1: aq_vec_deinit() drains the TX rings with a single
aq_ring_tx_clean() call, which is capped at AQ_CFG_TX_CLEAN_BUDGET
descriptors and stops at hw_head, frozen once the hardware and NAPI
have been stopped. Everything beyond that keeps its skb or xdp_frame
when the interface goes down and is lost when the buffer ring is
freed.
Patch 2: aq_ring_rx_deinit() only walks [sw_head, sw_tail). Since the
page reuse strategy was added, a cleaned RX buffer keeps its page for
reuse and refill is batched, so consumed but not yet reposted slots
accumulate in the [sw_tail, sw_head) gap and their pages and DMA
mappings are never released.
Reproduction logs for both leaks (as page_pool stalled shutdowns,
which is how they become visible) are in the notes of the respective
patches.
[1] https://lore.kernel.org/lkml/tencent_1F173E0FC1606D2AC704DC9C98AF10984607@qq.com/
====================
Link: https://patch.msgid.link/tencent_29B860317921D68DE77C718242DA418EB608@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to
hardware. Since the page reuse strategy was added, a cleaned RX buffer
keeps its page (and its DMA mapping) in the ring for reuse, and refill
is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES
slots are free. Slots that were consumed but not yet reposted therefore
sit in the complementary [sw_tail, sw_head) gap with a live page, and
the deinit walk never visits them: up to a refill batch worth of pages
and DMA mappings leak on every interface down.
Walk the whole ring instead and release whatever is still there. Also
bail out if the buffer ring is already gone: a partial
aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so
aq_ptp_ring_deinit() still gets here on the unwind path.
Cc: stable@vger.kernel.org # v5.2+
Fixes: 46f4c29d9d ("net: aquantia: optimize rx performance by page reuse strategy")
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/tencent_607CBA8237DA438E36B844318B21538DE008@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean()
call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and
stops at hw_head, which no longer moves once aq_vec_stop() has stopped
the hardware and NAPI. Completed descriptors beyond the budget and
everything still posted in [hw_head, sw_tail) keep their skb or
xdp_frame when the interface goes down: aq_vec_ring_free() then frees
the buffer ring and the references are lost for good.
Today this is a silent memory leak on every interface down under
TX/XDP_TX load. With the conversion of the RX path to page_pool posted
for net-next it becomes much more visible: XDP_TX frames carry fragment
references on the RX ring's page_pool, so a single stranded frame keeps
the pool's inflight count above zero forever. page_pool_destroy() then
never completes, the pool is leaked together with its pages, and
"page_pool_release_retry() stalled pool shutdown" is warned every 60
seconds from that point on, on every ifdown, XDP detach or ring resize
under XDP_TX load.
Bring back aq_ring_tx_deinit() as it was before the removal and use it
for teardown again, with one extension: TX rings can hold xdp_frames
nowadays, so release those too. They are returned with
xdp_return_frame() since this runs in process context.
Fixes: eb36bedf28 ("net: aquantia: remove function aq_ring_tx_deinit")
Cc: stable@vger.kernel.org # v4.11+
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/tencent_EEDC35FAF2750A3A6A0B39BAE0E2C484860A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the referenced commit, changing the MTU on a running interface no
longer disconnects and reconnects the PHY; __stmmac_release() merely
stops phylink, which also suspends the PHY (BMCR power-down) when WoL
is not enabled. __stmmac_open() then performs the DMA software reset in
stmmac_hw_setup() before phylink_start() resumes the PHY again.
IEEE 802.3 22.2.4.1.5 allows a PHY to stop its receive clock while
powered down, and stmmac requires a running receive clock for the DMA
software reset to complete (the phylink config sets mac_requires_rxc).
On such setups, e.g. the RK3566-based Home Assistant Green with an
RTL8211F-VD PHY in RGMII mode, any runtime MTU change now times out and
leaves the interface dead:
rk_gmac-dwmac fe010000.ethernet end0: Failed to reset the dma
rk_gmac-dwmac fe010000.ethernet end0: stmmac_hw_setup: DMA engine initialization failed
rk_gmac-dwmac fe010000.ethernet end0: __stmmac_open: Hw setup failed
rk_gmac-dwmac fe010000.ethernet end0: failed reopening the interface after MTU change
In the field this is triggered by NetworkManager applying an MTU while
activating the connection, breaking networking entirely. The same
regression has also been reported on i.MX8MP and reproduced on SoCFPGA
based systems.
Resume the PHY in __stmmac_open() before the hardware setup, making it
the counterpart of the phylink_stop() in __stmmac_release(), like
stmmac_resume() already does for the same reason. phylink_start() also
resumes the PHY, but only after stmmac_hw_setup(), and it cannot be
moved before the hardware setup since it may bring the link up
immediately from a workqueue, racing with the initialization (see the
comment in stmmac_resume()). For the regular ndo_open path the PHY has
just been attached and is not suspended, in which case
phylink_prepare_resume() does nothing.
Fixes: db299a0c09 ("net: stmmac: move PHY handling out of __stmmac_open()/release()")
Link: https://github.com/home-assistant/operating-system/issues/4858
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260803095156.132827-1-stefan@agner.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* use rcu_dereference_bh() instead of rcu_access_pointer() where the
pointer is actually dereferenced
* ensure TCP global variables are initialized before they can be
accessed via netlink (e.g. when attaching a TCP socket)
* actually disable IPv4 redirects on multipeer interfaces (the
previous attempt was a no-op and did not survive netns moves)
* hash a floated peer by its transport identity only, consistently
with the add and lookup paths
* zero the sockaddr padding before learning a floated endpoint so it
does not leak into the by_transp_addr hash key
* ensure the socket is owned by ovpn before dereferencing
sk_user_data
* rehash a peer in the by_transp_addr table when its remote endpoint
is updated via CMD_PEER_SET
* avoid re-adding to the hashtables a peer that was concurrently
removed (use-after-free)
* limit keepalive values to one day to avoid overflowing the
delayed-work delay on 32-bit systems
* add the missing rtnl_link_ops->get_size callback so link messages
account for the nested mode attribute
-----BEGIN PGP SIGNATURE-----
iJEEABYIADkWIQQr0db7q+Rc7Zog28Fc8QQzwdnOtwUCamsZiRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQXPEEM8HZzrdjhQD/SJjvWsxHurn7vQJ8VFw9
wb8Q06TpSjdHkd5xXpQzohoA/joMlAYnVhSlYDcDaF3DCzmCAW6fG/bpPoI4bpFj
i8UD
=Oppi
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-20260730' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Included fixes:
* use rcu_dereference_bh() instead of rcu_access_pointer() where the
pointer is actually dereferenced
* ensure TCP global variables are initialized before they can be
accessed via netlink (e.g. when attaching a TCP socket)
* actually disable IPv4 redirects on multipeer interfaces (the
previous attempt was a no-op and did not survive netns moves)
* hash a floated peer by its transport identity only, consistently
with the add and lookup paths
* zero the sockaddr padding before learning a floated endpoint so it
does not leak into the by_transp_addr hash key
* ensure the socket is owned by ovpn before dereferencing
sk_user_data
* rehash a peer in the by_transp_addr table when its remote endpoint
is updated via CMD_PEER_SET
* avoid re-adding to the hashtables a peer that was concurrently
removed (use-after-free)
* limit keepalive values to one day to avoid overflowing the
delayed-work delay on 32-bit systems
* add the missing rtnl_link_ops->get_size callback so link messages
account for the nested mode attribute
* tag 'ovpn-net-20260730' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: fix incorrect use of rcu_access_pointer()
ovpn: ensure TCP vars are initialized first
ovpn: disable IPv4 redirects on MP interfaces
ovpn: hash floated peer by transport identity only
ovpn: zero-initialize sockaddr before learning a floated endpoint
ovpn: ensure socket is owned by ovpn before deref sk_user_data
ovpn: rehash peer in by_transp_addr table on CMD_PEER_SET
ovpn: skip rehash for peers already removed from by_id
ovpn: limit keepalive values to one day
ovpn: add missing rtnl_link_ops->get_size callback
====================
Link: https://patch.msgid.link/20260730094624.4102963-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The add/remove eprobe test installs an eprobe for the openat syscall and
runs ls. It checks the filenames that were opened by ls against a
whitelist and a blacklist.
Commit 206b25c090 ("tracing: eprobe: read the complete FILTER_PTR_STRING
pointer") fixed access to some string fields in eprobes. This triggers
test failures as the blacklist does not allow relative paths for the
openat parameters.
What makes this test unstable is the fact that the openat calls vary a
lot between different systems.
Refactor the test to make it more robust. "cd <directory>" will issue a
chdir syscall with the target directory as parameter. Set an eprobe on
the sys_enter_chdir event and filter for the exact directory name. Allow
(fault) as fallback.
Link: https://lore.kernel.org/all/20260804194705.760893-1-martin@kaiser.cx/
Fixes: 206b25c090 ("tracing: eprobe: read the complete FILTER_PTR_STRING pointer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202607151010.b68428e1-lkp@intel.com
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When a TRANS2 response is split across multiple secondary packets,
coalesce_t2() assembles the payload into the large response buffer.
Two bugs cause SendReceive() to copy only a small fraction of the
assembled buffer into the caller's output buffer.
This manifests when listing a large directory on an SMB1 share
(observed against Windows XP); the first getdents returns only
partial results, and subsequent getdents returns EINVAL.
Bug 1: coalesce_t2() computes the coalesced size as:
*pdu_len += total_in_src;
cifs_demultiplex_thread() resets *pdu_len to each secondary's own
pdu_length before calling coalesce_t2(), so this accumulates from
the wrong baseline on every secondary after the first.
Bug 2: after reassembly, cifs_demultiplex_thread() sets
mid->resp_buf_size to the final secondary's raw packet size. This
value is later used as the memcpy length, so only a portion of the
coalesced response is copied.
Fix both by replacing the stale *pdu_len arithmetic with
smbCalcSize(), which reads the BCC field that coalesce_t2()
maintains correctly throughout reassembly.
Fixes: 83bfbd0bb9 ("cifs: Remove the RFC1002 header from smb_hdr")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In lm25066_probe(), the PMBus coefficients for current and power are
scaled based on the shunt resistor value. The calculation evaluates the
multiplication using 32-bit arithmetic because info->m is an int and
shunt is a u32:
static int lm25066_probe(struct i2c_client *client) {
...
info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000;
info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000;
...
}
For large coefficients like 26882 (LM25056) or 15076 (LM5066i), a device
tree shunt-resistor-micro-ohms value exceeding approximately 159,000
(159 mOhm, which is physically valid for low-current applications) causes
the intermediate product to exceed UINT_MAX (4,294,967,295). This results
in a silent wraparound before the division by 1000.
Furthermore, if the wrapped value has the most significant bit set,
converting it back to the signed int info->m results in negative
coefficients. This logic error leads to drastically corrupted current and
power readings, which can cause erratic thermal or power management
behavior in the system.
Fix the problem by using 64-bit operations for the multiply/divide
operations. This can still overflow, but only for unreasonably large
shunt resistor values.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 94ee5fcc24 ("hwmon: (pmbus/lm25066) Support configurable sense resistor values")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
I hit the following on one of my machines:
mce: CPU0 BANK15 CMCI inherited storm
------------[ cut here ]------------
ODEBUG: assert_init not available (active state 0) object: (____ptrval____) object type: timer_list hint: 0x0
WARNING: lib/debugobjects.c:632 at debug_object_assert_init+0x178/0x230, CPU#0: swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5 #3 PREEMPTLAZY
RIP: 0010:debug_object_assert_init+0x18f/0x230
Call Trace:
<TASK>
__mod_timer
mce_timer_kick
cmci_discover
intel_init_cmci
mce_intel_feature_init
mcheck_cpu_init
identify_cpu
identify_boot_cpu
arch_cpu_finalize_init
start_kernel
A second splat follows right after, from timer_setup() finding that same
timer already queued:
ODEBUG: init active (active state 0) object: (____ptrval____) object type: timer_list hint: stub_timer+0x0/0x10
This is happening because CMCI storm detection is trying to modify the timer
before latter was properly set up.
Set up the timer first. __mcheck_cpu_setup_timer() only calls timer_setup(),
and depends on neither the generic nor the vendor init.
[ bp: Massage commit message. ]
Fixes: 1f68ce2a02 ("x86/mce: Handle Intel threshold interrupt storms")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260803-mce_timer_init-v1-1-9539db424330@debian.org
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a3 (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits.
Fixes: 8814c4b533 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260803122758.666112-1-david.lee@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A small number of fixes that seem too important to
wait until the next release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmpxXrUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpX5IIAJhVIR6djPQ/Hf24pHD+wHPAvKbV4+CCrtlv
S/Frw7R8bTn0byvr3iuAHcuWLKSMXPYxfGKQRI1E7E4vbbKD81N0p+vYiO41pyV6
d7BKUxSIEOEExJ8c198ajo+S2n5OdLjayLfYagzqbClwb2Snz+mdGjBIcSLJttSb
i53LebWHDXV8/uZLkyd0H8YlHXHmxroIOq16UpwwvO+lgafxZPs6ZinBS5fwEJxk
fyKKf1rdoPbqQhrDU5IaHlQdqS+ZjL+3ab3rT49wCSnn+FKpzzikhxELNylZZMof
StC/Y3HAbC8rY54ZMjxGcDt1KfntRchZySuOmhZ/Av+sCXaegm0=
=EMjO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost/vdpa fixes from Michael Tsirkin:
"A small number of fixes that seem too important to
wait until the next release"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: reject feature changes after endpoint
vhost-scsi: flush backend after device ioctls
vhost: reset the vring metadata cache on vring reconfiguration
vhost-scsi: Validate T10 PI scatterlist counts
vdpa/mlx5: Fix buffer length in create_direct_keys()
vhost/vdpa: reject overflowing PA map page counts on 32-bit
vhost_iotlb: bound map allocation in add_range
The init_device() call in nzxt_smart2_hid_probe() can fail because it
sends HID output reports to the hardware to detect fans and set the
update interval. If the hardware is not responding or the HID reports
fail, init_device() returns a negative error code.
However, the return value was ignored, causing the probe to continue
and register an hwmon device even though the device was never properly
initialized. This leads to an inconsistent state where the driver
reports stale data or blocks on wait queues that will never be woken.
The same function's return value is already checked in the
reset_resume() handler, confirming the author's intent that errors
should be propagated.
Note that this fix was not possible before commit 59d104b54b
("hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop")
because the out_hw_close error path was missing hid_device_io_stop(),
which would have opened a use-after-free risk window.
Fixes: 53e68c20ae ("hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Link: https://lore.kernel.org/r/20260804074842.505923-1-fffsqian@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add Ryan and Billy as reviewers for ASPEED SoC patches. I asked both to add
themselves to increase ASPEED's visibility of upstream changes.
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCanGGJhwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmDFoA+wVan8QYBaVyH4ESK0nz
73koP4V+NcoMRFeH7WHlKi3yAQDkXhq553bJXUlEhM8Gmy8A+29bjc1YsbwqQ1k9
DBw6DA==
=IW7p
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=qDYR
-----END PGP SIGNATURE-----
Merge tag 'aspeed-7.3-maintainers-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
aspeed: Update MAINTAINERS for 7.3
Add Ryan and Billy as reviewers for ASPEED SoC patches. I asked both to add
themselves to increase ASPEED's visibility of upstream changes.
* tag 'aspeed-7.3-maintainers-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
MAINTAINERS: add Ryan Chen and Billy Tsai as reviewer for ARM/ASPEED
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Again a one-off change, fixing OF resource leaks in the SMP-bringup code for the
NPCM7xx SoCs.
-----BEGIN PGP SIGNATURE-----
iJEEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCanGNzhwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGm7q0BALVNMCCpkq7EUdoXlLXQ
kKLaa/eHSsRjlVkWysp8KMNhAPitU483DtqvcGiPeLD/ljIc4SC6CubwoE0YcNdg
SCkL
=jyvO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=g+dz
-----END PGP SIGNATURE-----
Merge tag 'nuvoton-7.2-arm-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
nuvoton: First batch of ARM arch fixes for 7.2
Again a one-off change, fixing OF resource leaks in the SMP-bringup code for the
NPCM7xx SoCs.
* tag 'nuvoton-7.2-arm-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: npcm: Fix OF node refcount leaks in SMP setup
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCanIVbBQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5ZZJAPoCMJOvZSkj5EZVUr/fsO6MiC8rQDu6
OhNe4lripeVOowD/RapG1/PcGuYNlqtOxjFaB/Y0FYRH2hnGHpgqW/If0ws=
=2zQ5
-----END PGP SIGNATURE-----
Merge tag 'integrity-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Two IMA bug fixes: one addresses a potential integer underflow, the
other instantiates two LSM hooks"
* tag 'integrity-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Instantiate file_truncate and path_truncate hooks
ima: fix out-of-bounds read in xattr_verify()
VFs were missing the call to apply the global scheduling policy.
Call xe_guc_submit_enable() during vf_uc_load_hw() to ensure VFs
get the same policy enforcement as PF.
Fixes: 26caeae9fb ("drm/xe/guc: Set RCS/CCS yield policy")
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260709075945.1337660-1-marcin.bernatowicz@linux.intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit f09360e857130f7ab7f069e2421e6b4a6e502531)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The q->replay_state is blindly overwritten, which can potentially leak
memory that was previously allocated by vmemdup_user().
Return an error if q->replay_state is not empty.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 1026c1a73a ("drm/xe: Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260624111421.1258364-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instantiate the file_truncate and path_truncate LSM hooks to reset the
action cache flags (IMA_DONE_MASK) as soon as truncation is requested,
so the file, based on policy, is re-collected, re-measured, re-audited,
and re-appraised on next access.
Tested-by: Frederick Lawler <fred@cloudflare.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The digest-length check in xattr_verify() mixes int and size_t:
if (xattr_len - sizeof(xattr_value->type) - hash_start >=
iint->ima_hash->length)
sizeof() yields size_t, so the usual arithmetic conversions promote
the whole left-hand side to unsigned 64-bit before the subtraction
runs. For a truncated xattr this underflows instead of going negative:
a 1-byte IMA_XATTR_DIGEST_NG xattr (xattr_len == 1, hash_start == 1)
turns "1 - 1 - 1" into SIZE_MAX, which is trivially >= ima_hash->length.
The check then passes and the following memcmp() reads
iint->ima_hash->length bytes starting past the end of the buffer
vfs_getxattr_alloc() allocated for it.
Nothing upstream clamps xattr_len back into a safe range first:
ima_get_hash_algo() only special-cases xattr_len < 2 to pick a default
algorithm, and evm_verifyxattr() returns INTEGRITY_UNKNOWN rather than
failing when no HMAC key is loaded, so a truncated security.ima value
reaches the length check as-is.
Rewrite the comparison so every operand stays a signed int and no
implicit conversion to size_t can occur.
Fixes: 3ea7a56067 ("ima: provide hash algo info in the xattr")
Cc: stable@vger.kernel.org
Signed-off-by: Lincoln Wallace <locnnil0@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
