The parport subsystem registers port devices before they are fully
initialised, resulting in a race condition where client drivers such
as lp can attach to ports that are not completely initialised or even
being torn down.
When the port and client drivers are built as modules and loaded
around the same time during boot, this occasionally results in a
crash. I was able to make this happen reliably in a VM with a
PC-style parallel port by patching parport_pc to fail probing:
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,
> if (!p)
> goto out3;
>
> - base_res = request_region(base, 3, p->name);
> + base_res = NULL;
> if (!base_res)
> goto out4;
>
and then running:
while true; do
modprobe lp & modprobe parport_pc
wait
rmmod lp parport_pc
done
for a few seconds.
In the long term I think port registration should be changed to put
the call to device_add() inside parport_announce_port(), but since the
latter currently cannot fail this will require changing all port
drivers.
For now, add a flag to indicate whether a port has been "announced"
and only try to attach client drivers to ports when the flag is set.
Fixes: 6fa45a2268 ("parport: add device-model to parport subsystem")
Closes: https://bugs.debian.org/1130365
Closes: https://lore.kernel.org/all/6ba903ad-9897-42bb-8c2d-337385cc3746@molgen.mpg.de/
Cc: stable <stable@kernel.org>
Signed-off-by: Ben Hutchings <benh@debian.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://patch.msgid.link/afo6uBv68GDevbMD@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in
probe(), but then calls kfree(udev) both on the probe() error path
(label out_free) and again in remove().
Because devm_kzalloc() allocations are devres-managed and are freed
automatically when the device is detached (including after a failing
probe() and during driver unbind), the explicit kfree() can lead to a
double free.
If probe() fails after devm_kzalloc(), the error path frees udev and
devres cleanup will free it again when the core unwinds the partially
bound device. On normal driver removal, remove() frees udev and devres
will free it again when the device is detached.
This issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix by removing the manual kfree() calls
and dropping the now-unused label.
Fixes: 3397c3cd85 ("uio: Add SVA support for PCI devices via uio_pci_generic_sva.c")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260505150256.614071-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 6c37bebd8c, we switched to looping over the list and dropping each
individual node, ostensibly without the lock held in the loop body.
If the kernel were using Rust Edition 2024, the comment would be
accurate, and the lock would not be held across the drop. However, the
kernel is currently using 2021, so tail expression lifetime extension
results in the lock being held across the drop. Explicitly binding the
expression result to a variable makes the lockguard no longer part of a
tail expression, causing the lock to be dropped before entering the loop
body.
This was detected via `CONFIG_PROVE_LOCKING` identifying an invalid wait
context at the drop site.
Reported-by: David Stevens <stevensd@google.com>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Cc: stable <stable@kernel.org>
Fixes: 6c37bebd8c ("rust_binder: avoid mem::take on delivered_deaths")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260403-lockhold-v1-1-c332b56cd8ae@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an outdated transaction is removed from `oneway_todo` due to
`TF_UPDATE_TXN`, its `Allocation` is dropped. The current implementation
of `Allocation::drop` calls `pending_oneway_finished()`, assuming the
transaction was executed. This leads to premature execution of the next
queued one-way transaction.
Fix this by taking the `oneway_node` from the `Allocation` of the
outdated transaction before it is dropped. This prevents
`Allocation::drop` from signaling completion.
We do not call `take_oneway_node()` from `Transaction::cancel` because
it's actually correct to call `pending_oneway_finished()` on cancel if
the transaction did not come from `oneway_todo`. This ensures that if
`BINDER_THREAD_EXIT` is invoked and cancels a oneway transaction, then
the next transaction is taken from `oneway_todo`.
This bug does not lead to any issues in the kernel, but may lead to
Binder delivering transactions to userspace earlier than userspace
expected to receive them.
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Assisted-by: Antigravity:gemini
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260414-tf-update-txn-fix-v1-1-d2b83303acc9@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 783ddaebd3 ("staging: comedi: comedi_test: support
scan_begin_src == TRIG_FOLLOW") neglected to add a test that
`scan_begin_src` has only one bit set. The allowed values are
`TRIG_FOLLOW` and `TRIG_TIMER`, but the code incorrectly also allows
`TRIG_FOLLOW | TRIG_TIMER`. Add a call to
`comedi_check_trigger_is_unique()` to check that only one trigger source
bit is set.
Fixes: 783ddaebd3 ("staging: comedi: comedi_test: support scan_begin_src == TRIG_FOLLOW")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260422162138.36003-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function checks and possibly modifies the description of an
asynchronous command to be run on the analog input subdevice of a comedi
device attached to the "comedi_test" driver, returning 0 if no
modifications were required, or a positive value that indicates which
step of the checking process it failed on. Step 4 fixes up various
argument values for various trigger sources.
There are two bugs in the fixing up of the `convert_arg` value to keep
the `scan_begin_arg` value within the range of `unsigned int` when
`scan_begin_src` and `convert_src` both have the value `TRIG_TIMER`,
which indicates that the corresponding `_arg` values hold a time period
in nanoseconds. The code also uses `scan_end_arg` which hold the number
of "conversions" within each "scan". The goal is to end up with the
scan period being less than or equal to the convert period multiplied by
the number of conversions per scan. It intends to do that by clamping
the `convert_arg` value to a maximum value of `UINT_MAX / scan_end_arg`
rounded down to a multiple of 1000 (`NSEC_PER_USEC`).
(The rounding from nanoseconds to microseconds is because the driver is
modelling a device that uses a 1 MHz clock for timing. This is partly
because that is a more typical timing base for real hardware devices
driven by comedi, and partly because the driver used to use `struct
timeval` internally.)
The first bug is that the code checks if `scan_begin_arg == TRIG_TIMER`
when it should be checking if `scan_begin_src == TRIG_TIMER`. The
bugged check will always fail because if `scan_begin_src == TRIG_TIMER`,
then `scan_begin_arg` will be at least 1000 (`NSEC_PER_USEC`), otherwise
`scan_begin_src == TRIG_FOLLOW` and `scan_begin_arg` will be 0. (N.B
`TRIG_TIMER` is defined as `0x10`.) The second bug is that is rounding
the maximum value down to a multiple of 1000000000 (`NSEC_PER_SEC`)
instead of 1000 (`NSEC_PER_USEC`), however this bug is not reached due
to the first bug. This patch fixes both bugs.
Fixes: 783ddaebd3 ("staging: comedi: comedi_test: support scan_begin_src == TRIG_FOLLOW")
Fixes: 5afdcad2f8 ("staging: comedi: comedi_test: limit maximum convert_arg")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260422144637.27692-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Usual mixed bag of ancient issues and more recent.
Lots of new contributors this cycle and some of that work has
uncovered bugs in the code they were looking at.
core,buffer
- Add missing dma_fence_put()
- hw-consumer - Fix a use after free in cleaning up a list.
core,inkern
- Fix return value handling in iio_read_channel_processed_scale() that
meant a correct result was treated as an error.
adi,ad3530r
- Fix powerdown mode strings for AD3531 and AD3531R.
adi,ad4695
- Fix ordering so by the time device transitions to offload mode
all setup transfers are done. This avoids issues with offload
controllers that cannot handle normal transfers after offload has
begun.
adi,ad5686
- Fix wrong initialization of reference bit for single channel parts.
- Fix off by one in check on input raw value
adi,adis16260
- Fix division by zero triggerable from sysfs.
adi,adis16550
- Fix a stack leak to userspace.
amlogic,meson-adc
- Fix a buffer allocation leak in an error path.
bosch,bmp280
- Fix a stack leak to userspace.
capella,cm3323
- Fix wrong return value rather than register value being written
data->reg_conf on write.
maxim,max5821
- Check correct length i2c_master_send() in max5821_sync_powerdown_mode().
mediatek,mt6359
- Fix potential uninitialized value.
nuvoton,npcm_adc
- Fix unbalance clk_disable_unprepare()
nxp,sar-adc
- Avoid a division by zero if the common clock framework is disabled.
- Fix a division by zero triggerable from sysfs.
- Ensure all of struct dma_slave_config is initialized.
qcom,spmi-adc-gen3
- Fix an off by one that leads to an out of bounds array read.
samsung,ssp_sensors
- Ensure work is cancelled during remove to avoid use after free.
sensiron,scd30
- Fix a division by zero triggerable from sysfs.
st,lsm6dsx
- Fix a stack leak to userspace.
st,magn
- Fix default value for data ready pin selection for devices that
have no data ready pin selection.
vishay,veml6070
- Close a resource leak in an error path.
winsen,mhz19b
- Reject over-sized serial messages from device.
xilinx,xadc
- Fix sequencer handling for dual MUX cases
-----BEGIN PGP SIGNATURE-----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=Ja6W
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
iio-fixes-for-7.a IIO: 1st set of fixes for the 7.1 cycle
Usual mixed bag of ancient issues and more recent.
Lots of new contributors this cycle and some of that work has
uncovered bugs in the code they were looking at.
core,buffer
- Add missing dma_fence_put()
- hw-consumer - Fix a use after free in cleaning up a list.
core,inkern
- Fix return value handling in iio_read_channel_processed_scale() that
meant a correct result was treated as an error.
adi,ad3530r
- Fix powerdown mode strings for AD3531 and AD3531R.
adi,ad4695
- Fix ordering so by the time device transitions to offload mode
all setup transfers are done. This avoids issues with offload
controllers that cannot handle normal transfers after offload has
begun.
adi,ad5686
- Fix wrong initialization of reference bit for single channel parts.
- Fix off by one in check on input raw value
adi,adis16260
- Fix division by zero triggerable from sysfs.
adi,adis16550
- Fix a stack leak to userspace.
amlogic,meson-adc
- Fix a buffer allocation leak in an error path.
bosch,bmp280
- Fix a stack leak to userspace.
capella,cm3323
- Fix wrong return value rather than register value being written
data->reg_conf on write.
maxim,max5821
- Check correct length i2c_master_send() in max5821_sync_powerdown_mode().
mediatek,mt6359
- Fix potential uninitialized value.
nuvoton,npcm_adc
- Fix unbalance clk_disable_unprepare()
nxp,sar-adc
- Avoid a division by zero if the common clock framework is disabled.
- Fix a division by zero triggerable from sysfs.
- Ensure all of struct dma_slave_config is initialized.
qcom,spmi-adc-gen3
- Fix an off by one that leads to an out of bounds array read.
samsung,ssp_sensors
- Ensure work is cancelled during remove to avoid use after free.
sensiron,scd30
- Fix a division by zero triggerable from sysfs.
st,lsm6dsx
- Fix a stack leak to userspace.
st,magn
- Fix default value for data ready pin selection for devices that
have no data ready pin selection.
vishay,veml6070
- Close a resource leak in an error path.
winsen,mhz19b
- Reject over-sized serial messages from device.
xilinx,xadc
- Fix sequencer handling for dual MUX cases
* tag 'iio-fixes-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (31 commits)
iio: adc: viperboard: Fix error handling in vprbrd_iio_read_raw
iio: gyro: itg3200: fix i2c read into the wrong stack location
iio: dac: ad5686: fix powerdown control on dual-channel devices
iio: dac: ad5686: acquire lock when doing powerdown control
iio: temperature: tsys01: fix broken PROM checksum validation
iio: dac: ad3530r: Fix AD3531/AD3531R powerdown mode strings
iio: buffer: hw-consumer: fix use-after-free in error path
iio: dac: ad5686: fix input raw value check
iio: dac: ad5686: fix ref bit initialization for single-channel parts
iio: ssp_sensors: cancel delayed work_refresh on remove
iio: adc: meson-saradc: fix calibration buffer leak on error
iio: dac: max5821: fix return value check in powerdown sync
iio: adc: mt6359: fix unchecked return value in mt6358_read_imp
iio: adc: qcom-spmi-adc5-gen3: Fix off by one in adc5_gen3_get_fw_channel_data()
iio: imu: adis16550: fix stack leak in trigger handler
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
iio: pressure: bmp280: fix stack leak in bmp580 trigger handler
iio: adc: nxp-sar-adc: zero-initialize dma_slave_config
iio: light: cm3323: fix reg_conf not being initialized correctly
iio: magnetometer: st_magn: fix default DRDY pin selection for LIS2MDL
...
The driver proceeds to the reception phase even if the preceding
transmission fails.
This uses a goto error label for an early bail out and ensures the mutex is
properly unlocked in case of failure.
Fixes: ffd8a6e7a7 ("iio: adc: Add viperboard adc driver")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
itg3200_read_all_channels() takes `__be16 *buf' as a parameter and
fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the
parameter (a pointer), `&buf' is the address of the local pointer
slot on the stack of itg3200_read_all_channels(), not the address
of the caller's scan buffer. The (char *) cast hides the type
mismatch.
i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)
= 8 bytes into the parameter's stack slot, which is discarded when
the function returns. The caller's scan buffer in
itg3200_trigger_handler() is never written to, so
iio_push_to_buffers_with_timestamp() pushes uninitialised stack
contents to userspace via /dev/iio:deviceX every scan -- both a
functional bug (no actual gyroscope or temperature data is
delivered through the triggered buffer) and an information leak.
The non-buffered read_raw() path is unaffected: it goes through
itg3200_read_reg_s16() which uses `&out' on a local s16 value,
where that is correct.
Drop the spurious `&' so the i2c read writes into the caller's
buffer.
Fixes: 9dbf091da0 ("iio: gyro: Add itg3200")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fix powerdown control by using a proper bit shift for the powerdown mask
values. During initialization, powerdown bits are initialized so that
unused bits are set to 1 and the correct bit shift is used. Dual-channel
devices use one-hot encoding in the address and that reflects on the
position of the powerdown bits, which are not channel-index based
for that case. Quad-channel devices also use one-hot encoding for the
channel address but the result of log2(address) coincides with the channel
index value. Mask as 0x3U is used rather than 0x3, because shift can reach
value of 30 (last channel of a 16-channel device), which would mess with
the sign bit. The issue was introduced when first adding support for
dual-channel devices, which overlooked powerdown control differences.
Fixes: 7dc8faeab3 ("iio: dac: ad5686: add support for AD5338R")
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Protect access of pwr_down_mode and pwr_down_mask fields with existing
mutex lock. Each channel exposes their own attributes for controlling
powerdown modes and powerdown state. This fixes potential race conditions
as those the write functions perform non-atomic read-modify-write
operations to those pwr_down_* fields. This issue exists since the ad5686
driver was first introduced.
Fixes: c2f37c8dca ("iio: dac: New driver for AD5686R, AD5685R, AD5684R Digital to analog converters")
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The current implementation of tsys01_crc_valid() incorrectly sums the
first word (n_prom[0]) repeatedly instead of iterating over the 8 words
retrieved from the PROM. This leads to a checksum mismatch and probe
failure on hardware.
According to the TSYS01 datasheet, the PROM consists of 8 words. A valid
check must iterate through all 8 words to verify the integrity of the
calibration data. The current driver only checks the first word 8 times.
Note: This fix was identified during a code audit and is based on
datasheet specifications. It has not been tested on real hardware.
Fixes: 43e53407f6 ("Add tsys01 meas-spec driver support")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD3531/AD3531R has different output operating modes from the
AD3530/AD3530R. According to the AD3531/AD3531R datasheet, the
powerdown modes are:
01: 500 Ohm output impedance
10: 3.85 kOhm output impedance
11: 16 kOhm output impedance
The driver currently uses the AD3530R modes (1k, 7.7k, 32k) for all
variants, which is incorrect for AD3531/AD3531R.
Add AD3531R-specific powerdown mode strings and assign them to the
AD3531/AD3531R chip variants.
Fixes: 93583174a3 ("iio: dac: ad3530r: Add driver for AD3530R and AD3531R")
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code
was using list_for_each_entry() to iterate through buffers while calling
iio_buffer_put() which can free the current buffer if refcount drops to 0.
The list_for_each_entry() loop macro then evaluates buf->head.next to
continue iteration, accessing the freed buffer.
Fix this by using list_for_each_entry_safe().
Fixes: 48b66f8f93 ("iio: Add hardware consumer buffer support")
Reported-by: sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260427-iio_buf-v1-1-2bbdac844647%40gmail.com
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fix range check for input raw value, which is off by one, i.e., for a
10-bit DAC the max valid value is 1023, but 1 << 10 equals 1024, which
passes the previous check, allowing an out-of-range write. The issue
exists since the ad5686 driver was first introduced.
Fixes: c2f37c8dca ("iio: dac: New driver for AD5686R, AD5685R, AD5684R Digital to analog converters")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The reference bit position was ignored when writing the register at the
probe() function (!!val was used). When such bit is 1, internal voltage
reference is disabled so that an external one can be used. For
multi-channel devices, bit 0 of the Internal Reference Setup command
behaves the same way, so AD5686_REF_BIT_MSK is created. The issue exists
since support for single-channel devices were first introduced.
Fixes: be1b24d245 ("iio:dac:ad5686: Add AD5691R/AD5692R/AD5693/AD5693R support")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The work_refresh may still be pending or running when the device is
removed, cancel the delayed work_refresh in remove path.
Fixes: 50dd64d57e ("iio: common: ssp_sensors: Add sensorhub driver")
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
meson_sar_adc_temp_sensor_init() allocates a buffer with
nvmem_cell_read(), but the old code leaked it if
syscon_regmap_lookup_by_phandle() failed.
Fix this by adding missing kfree(buf).
Fixes: d6f2eac644 ("iio: adc: meson: no devm for nvmem_cell_get")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The function max5821_sync_powerdown_mode() returned the result of
i2c_master_send() directly. If a partial transfer occurred, it would
be incorrectly treated as a success by the caller.
While the caller currently handles the positive return value of 2 as
success, this patch refactors the function to return 0 on full success
and -EIO on short writes. This ensures robust error handling for
incomplete transfers and improves code maintainability by using
sizeof(outbuf).
Fixes: 4729889727 ("iio: add support of the max5821")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In mt6358_read_imp(), the variable val_v is passed to regmap_read()
but the return value is not checked. If the read fails, val_v remains
uninitialized and its random stack content is subsequently reported
as a measurement result.
Initialize val_v to zero to ensure a predictable value is reported
in case of bus failure and to prevent potential stack data leakage.
This also satisfies static analyzers that might otherwise flag the
variable as used uninitialized.
Fixes: 3587914bf6 ("iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The > in "if (chan > ADC5_MAX_CHANNEL)" should be >= to prevent an out
of bound read of the adc->data->adc_chans[] array.
Fixes: baff45179e ("iio: adc: Add support for QCOM PMIC5 Gen3 ADC")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
adis16550_trigger_handler() declares the scan data array on the stack
without initializing it. The memcpy() at the bottom fills only the
first 28 bytes (TEMP + 6 channels of GYRO/ACCEL data), and
iio_push_to_buffers_with_timestamp() writes the s64 timestamp at the
8-byte-aligned offset 32. Bytes 28-31 remain uninitialized stack data
which leaks to userspace on ever trigger.
Fix this all by just zero-initializing the structure on the stack.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy@kernel.org>
Fixes: e4570f4bb2 ("iio: imu: adis16550: align buffers for timestamp")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The tagged FIFO path declares iio_buff on the stack with __aligned(8)
but no initializer, but there is a hole in the structure, which will
then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be
copied, but the space between that and the timestamp are not
initialized.
Commit c14edb4d0b ("iio:imu:st_lsm6dsx Fix alignment and data leak
issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,
but for the tagged path it only added the alignment qualifier and not
the initializer :(
Fix this by just zero-initializing the structure on the stack.
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy@kernel.org>
Fixes: c14edb4d0b ("iio:imu:st_lsm6dsx Fix alignment and data leak issues")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy@kernel.org>
Fixes: 872c8014e0 ("iio: pressure: bmp280: drop sensor_data array")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
nxp_sar_adc_start_cyclic_dma() only fills the RX-side members of
dma_slave_config before passing it to dmaengine_slave_config().
Zero-initialize the structure so unused members do not contain stack
garbage. Some DMA engines consult optional dma_slave_config fields, so
leaving them uninitialized can cause DMA setup failures.
Fixes: 4434072a89 ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The code stores the return value of i2c_smbus_write_word_data()
in data->reg_conf; however, this value represents the result
of the write operation and not the value actually written to
the configuration register. This meant that the contents of
data->reg_conf did not truly reflect the contents
of the hardware register.
Instead, save the value of the register before the write
and use this value in the I2C write.
The bug was found by code inspection: i2c_smbus_write_word_data()
returns 0 on success, not the value written to the register.
Tested using i2c-stub on a Raspberry Pi 3B running a custom 6.19.10
kernel. Before loading the driver, the configuration register 0x00
CM3323_CMD_CONF was populated with 0x0030 using
`i2cset -y 11 0x10 0x00 0x0030 w`, encoding an integration time of 320ms
in bits[6:4].
Due to incorrect initialization of data->reg_conf in
cm3323_init(), the print of integration_time returns 0.040000
instead of the expected 0.320000. This happens because the read of the
integration_time depends on cm3323_get_it_bits() that is based on the
value of data->reg_conf, which is erroneously set to 0.
With this fix applied, data->reg_conf correctly saves 0x0030 after init
and the successive integration_time reports 0.320000 as expected.
Fixes: 8b05442637 ("iio: light: Add support for Capella CM3323 color sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Aldo Conte <aldocontelk@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The device tree binding for st,lis2mdl does not support
st,drdy-int-pin property. However, when no platform data is provided
and the property is absent, the driver falls back to default_magn_pdata
which hardcodes drdy_int_pin = 2. This causes
`st_sensors_set_drdy_int_pin` to fail with -EINVAL because the LIS2MDL
sensor settings have no INT2 DRDY mask defined.
Fix this by checking the sensor's INT2 DRDY mask availability at
probe time and selecting the appropriate default pin. Sensors that
do not support INT2 DRDY will default to INT1, while all others
retain the existing default of INT2.
Fixes: 38934daf7b ("iio: magnetometer: st_magn: Provide default platform data")
Signed-off-by: Advait Dhamorikar <advaitd@mechasystems.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes,
kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial
kref to 1. It then calls dma_resv_add_fence() which takes a second
reference (kref=2), and stores a raw pointer in block->fence.
On the success path the function returns without calling dma_fence_put()
to release the initial reference, so every buffer enqueue permanently
leaks one kmalloc-128 allocation.
The iio_buffer_cleanup() work item only releases the temporary reference
taken during completion signalling by iio_buffer_signal_dmabuf_done();
the initial reference from dma_fence_init() is never released.
With four iio_rwdev instances at 240kHz and 512 samples per buffer,
this produces ~1875 kmalloc-128 allocations per second matching the
observed slab growth exactly. A test with ftrace confirmed that the
dma_fence_destroy event was never triggered.
Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring
ownership of the fence to the DMA reservation object. The DMA fence then
gets properly discarded after being signalled.
Fixes: 3e26d9f08f ("iio: core: Add new DMABUF interface infrastructure")
Originally-by: James Nuss <jamesnuss@nanometrics.ca>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero or a negative value to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel.
Also prevent unsigned integer underflow when the computed cycle count is
smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to
a huge value.
Fixes: 4434072a89 ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
A fix to plug a refcount leak in counter_alloc() if dev_set_name() fails
and the error path is taken.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCaga4SQAKCRC1SFbKvhIj
K6BFAQCT+DwFTzJ8JVt4eXZIwzZ/B5KdTetOMVST6pjqwy9OiAEAhLhZeMFdkAxg
KEUApW65KeKCSZKUEJeDftIOZxMx4ws=
=28xw
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
Counter fixes for 7.1
A fix to plug a refcount leak in counter_alloc() if dev_set_name() fails
and the error path is taken.
* tag 'counter-fixes-for-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: Fix refcount leak in counter_alloc() error path
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
-----BEGIN PGP SIGNATURE-----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=yAV8
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260426172505.1947915-1-graypanda.inzag@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23cea ("xsk: Fix possible segfault at xskmap entry insertion")
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/e4d7b53d4963ef520541a782f5fc8108a168877c.1778176504.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix a regression in overlayfs caused by an fsverity API change
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaf97zhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK+PtAQDzevIJ21gYwhimSRxpbB/eDRQO3gD2
wz4bz2lXZiCjIwEA8rktrlFgrLeqo1W252YXGpvlczf5qgupos3t4Hm8LAk=
=WsMl
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Fix a regression in overlayfs caused by an fsverity API change"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
ovl: fix verity lazy-load guard broken by fsverity_active() semantic change
Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7ksA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3cACgjbF86RGquBMOmCvW0y05gLGXACsAoM4cOfQd
Wel+rDTKUoa6FvreddHi
=vHTv
-----END PGP SIGNATURE-----
Merge tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues"
* tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
staging: vme_user: fix root device leak on init failure
Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7mNg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylbXACfWg3KnXzN+gCG8PM/zVLtinrAhDgAoLzKi1xv
OqVhzuOICtZiP8WBoBoC
=SeVl
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit Cinterion LE910Cx compositions
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usb: dwc3: Move GUID programming after PHY initialization
usb: typec: tcpm: fix debug accessory mode detection for sink ports
usb: typec: tcpm: reset internal port states on soft reset AMS
usb: ulpi: fix memory leak on ulpi_register() error paths
USB: omap_udc: DMA: Don't enable burst 4 mode
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
-----BEGIN PGP SIGNATURE-----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=rlX+
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
* tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: reject oversized block transfers in the common path
MAINTAINERS: Update mail for Peter Rosin
i2c: stub: Reject I2C block transfers with invalid length
i2c: Compare the return value of gpiod_get_direction against GPIO_LINE_DIRECTION_OUT
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
i2c: acpi: Add ELAN0678 to i2c_acpi_force_100khz_device_ids
dt-bindings: i2c: apple,i2c: Add t8122 compatible
i2c: stm32f7: reinit_completion() per transfer not per msg
dt-bindings: i2c: amlogic: Add compatible for T7 SOC
i2c: testunit: Replace system_long_wq with system_dfl_long_wq
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to:
Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP), Geert
Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar Chaurasiya (IBM),
Nathan Chancellor, Ritesh Harjani (IBM), Shivani Nittor, Sourabh Jain, Thomas
Zimmermann, Venkat Rao Bagalkote
-----BEGIN PGP SIGNATURE-----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=ZRl8
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP),
Geert Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar
Chaurasiya (IBM), Nathan Chancellor, Ritesh Harjani (IBM), Shivani
Nittor, Sourabh Jain, Thomas Zimmermann, and Venkat Rao Bagalkote.
* tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
powerpc/pasemi: Drop redundant res assignment
powerpc/ps3: Drop redundant result assignment
powerpc/vdso: Drop -DCC_USING_PATCHABLE_FUNCTION_ENTRY from 32-bit flags with clang
arch/powerpc: Drop CONFIG_FIRMWARE_EDID from defconfig files
powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
powerpc/8xx: Fix interrupt mask in cpm1_gpiochip_add16()
powerpc/vmx: avoid KASAN instrumentation in enter_vmx_ops() for kexec
powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o
pseries/papr-hvpipe: Fix style and checkpatch issues in enable_hvpipe_IRQ()
pseries/papr-hvpipe: Refactor and simplify hvpipe_rtas_recv_msg()
pseries/papr-hvpipe: Kill task_struct pointer from struct hvpipe_source_info
pseries/papr-hvpipe: Simplify spin unlock usage in papr_hvpipe_handle_release()
pseries/papr-hvpipe: Fix the usage of copy_to_user()
pseries/papr-hvpipe: Fix & simplify error handling in papr_hvpipe_init()
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
pseries/papr-hvpipe: Fix race with interrupt handler
powerpc/pseries/htmdump: Add memory configuration dump support to htmdump module
powerpc/pseries/htmdump: Fix the offset value used in htm status dump
powerpc/pseries/htmdump: Fix the offset value used in processor configuration dump
...
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to
TCMalloc's creative use of the supposedly read-only field.
The fix is to introduce a new ABI variant based on
a new (larger) rseq area registration size, to keep
the TCMalloc use of rseq backwards compatible on new kernels.
(Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2QJp
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
