[ Upstream commit 408d3ba006 ]
It's not very useful to repeat a bunch of probe deferral errors. And
it's also not very useful to log "failed" without telling the error
code.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d36dede45 ]
Highspeed device and below has different state names than superspeed and
higher. Add proper checks and printouts of link states for highspeed and
below.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eafcd8e3fb ]
Current core-pkey selftest fails if the test runs without privileges to
write into the core pattern file (/proc/sys/kernel/core_pattern). This
causes the test to fail and give the impression that the subsystem being
tested is broken, when, in fact, the test is being executed without the
proper privileges. This is the current error:
test: core_pkey
tags: git_version:v4.19-3-g9e3363be9bce-dirty
Error writing to core_pattern file: Permission denied
failure: core_pkey
This patch simply skips this test if it runs without the proper privileges,
avoiding this undesired failure.
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
CC: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5249497a7b ]
Some ptrace selftests are passing input operands using a constraint that
can allocate any register for the operand, and using these registers on
load/store operations.
If the register allocated by the compiler happens to be zero (r0), it might
cause an invalid memory address access, since load and store operations
consider the content of 0x0 address if the base register is r0, instead of
the content of the r0 register. For example:
r1 := 0xdeadbeef
r0 := 0xdeadbeef
ld r2, 0(1) /* will load into r2 the content of r1 address */
ld r2, 0(0) /* will load into r2 the content of 0x0 */
In order to avoid this possible problem, the inline assembly constraint
should be aware that these registers will be used as a base register, thus,
r0 should not be allocated.
Other than that, this patch removes inline assembly operands that are not
used by the tests.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c18aa1464 ]
Currently dev is dereferenced by the call dev_net(dev) before dev is null
checked. Fix this by null checking dev before the potential null
pointer dereference.
Detected by CoverityScan, CID#1462955 ("Dereference before null check")
Fixes: 23790ef120 ("net: qualcomm: rmnet: Allow to configure flags for existing devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b0c03ecc4 ]
This patch adds a new device-tree property that allows to
specify the dma protection control bits for the all of the
DMA controller's channel uniformly.
Setting the "correct" bits can have a huge impact on the
PPC460EX and APM82181 that use this DMA engine in combination
with a DesignWare' SATA-II core (sata_dwc_460ex driver).
In the OpenWrt Forum, the user takimata reported that:
|It seems your patch unleashed the full power of the SATA port.
|Where I was previously hitting a really hard limit at around
|82 MB/s for reading and 27 MB/s for writing, I am now getting this:
|
|root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real 0m 13.65s
|user 0m 0.01s
|sys 0m 11.89s
|
|root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real 0m 8.41s
|user 0m 0.01s
|sys 0m 4.70s
|
|This means: 121 MB/s reading and 75 MB/s writing!
|
|The drive is a WD Green WD10EARX taken from an older MBL Single.
|I repeated the test a few times with even larger files to rule out
|any caching, I'm still seeing the same great performance. OpenWrt is
|now completely on par with the original MBL firmware's performance.
Another user And.short reported:
|I can report that your fix worked! Boots up fine with two
|drives even with more partitions, and no more reboot on
|concurrent disk access!
A closer look into the sata_dwc_460ex code revealed that
the driver did initally set the correct protection control
bits. However, this feature was lost when the sata_dwc_460ex
driver was converted to the generic DMA driver framework.
BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55
BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50
Fixes: 8b3444852a ("sata_dwc_460ex: move to generic DMA driver")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 627469e444 ]
The function coh901318_alloc_chan_resources() calls spin_lock_irqsave()
before calling coh901318_config().
But coh901318_config() calls spin_lock_irqsave() again in its
definition, which may cause a double-lock bug.
Because coh901318_config() is only called by
coh901318_alloc_chan_resources(), the bug fix is to remove the
calls to spin-lock and -unlock functions in coh901318_config().
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 896585d48e ]
When we add a new IPv6 address, we should also join corresponding solicited-node
multicast address, unless the interface has IFF_NOARP flag, as function
addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do
not do dad and add the mcast address. So we will drop corresponding neighbour
discovery message that came from other nodes.
A typical example is after creating a ipvlan with mode l3, setting up an ipv6
address and changing the mode to l2. Then we will not be able to ping this
address as the interface doesn't join related solicited-node mcast address.
Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add
corresponding mcast group and check if there is a duplicate address on the
network.
Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b4385780 ]
Since only full-duplex operation is supported by the
hardware, remove duplex handling code and keep the
register setting of ECMR.DM fixed at 1.
This updates the driver implementation to follow the
data sheet text "This bit should always be set to 1."
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1bbc1a636 ]
We have to choose different configuration and different firmwares
depending on the external RF module that is installed. Since the
external module is not represented in the PCI IDs, we need to change
the configuration at runtime, after checking the RF ID of the module
installed. We have a bit of a mess in the code that does this,
because it applies cfg's according to the RF ID only, ignoring the
integrated module that is in use.
Fix that for some devices by adding correct configurations for them
and not ignoring the integrated module's type when making the
decision.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f02ac77c7 ]
The CEC specification requires that the Vendor ID (if any) is reported
after a logical address was claimed.
This was never done, so add support for this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e84eb9aff ]
Return 0 when invalidating the logical address. The cec core produces
a warning for drivers that do this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Torbjorn Jansson <torbjorn.jansson@mbox200.swipnet.se>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 649cfc2bdf ]
The ffz() return value is undefined if the instance mask does not
contain any zeros. If it returned 32, the following set_bit would
corrupt the debugfs_root pointer.
Switch to IDA for context index allocation. This also removes the
artificial 32 instance limit for all except CodaDx6.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6035cbcceb ]
DWC2 hardware module integrated in Samsung SoCs requires some quirks to
operate properly, so use Samsung SoC specific compatible to notify driver
to apply respective fixes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41ef387820 ]
In case of error, we return 0.
This is spurious and not consistent with the other functions of the driver.
Propagate the error code instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5234068e6 ]
The hwcap_str should be set in a correct order according to HWCAP_xx.
We also add the missing "fpu_dp" to it.
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83312f1b7a ]
_FP_ROUND_ZERO is defined as 0 and used as a statemente in macro
_FP_ROUND. This generates "error: statement with no effect
[-Werror=unused-value]" from gcc. Defining _FP_ROUND_ZERO as (void)0 to
fix it.
This modification is quoted from glibc 'commit <In libc/:>
(8ed1e7d5894000c155acbd06f)'
Signed-off-by: Vincent Chen <vincentc@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e438bae43c ]
In smc_wr_tx_put_slot() field pend->idx is used after being
cleared. That means always idx 0 is cleared in the wr_tx_mask.
This results in a broken administration of available WR send
payload buffers.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9828ca654b ]
Only retry connection setup with MPAv1 if the peer actually aborted the
connection upon receiving the MPAv2 start message. This avoids retrying
with MPAv1 in the case where the connection was aborted due to retransmit
timeouts.
Fixes: d2fe99e86b ("RDMA/cxgb4: Add support for MPAv2 Enhanced RDMA Negotiation")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c110d43c6 ]
When we read the EOF page of the file via readpages, we need
to zero the region beyond EOF that we either do not read or
should not contain data so that mmap does not expose stale data to
user applications.
However, iomap_adjust_read_range() fails to detect EOF correctly,
and so fsx on 1k block size filesystems fails very quickly with
mapreads exposing data beyond EOF. There are two problems here.
Firstly, when calculating the end block of the EOF byte, we have
to round the size by one to avoid a block aligned EOF from reporting
a block too large. i.e. a size of 1024 bytes is 1 block, which in
index terms is block 0. Therefore we have to calculate the end block
from (isize - 1), not isize.
The second bug is determining if the current page spans EOF, and so
whether we need split it into two half, one for the IO, and the
other for zeroing. Unfortunately, the code that checks whether
we should split the block doesn't actually check if we span EOF, it
just checks if the read spans the /offset in the page/ that EOF
sits on. So it splits every read into two if EOF is not page
aligned, regardless of whether we are reading the EOF block or not.
Hence we need to restrict the "does the read span EOF" check to
just the page that spans EOF, not every page we read.
This patch results in correct EOF detection through readpages:
xfs_vm_readpages: dev 259:0 ino 0x43 nr_pages 24
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x4f000 count 98304 type hole startoff 0x13c startblock 1368 blockcount 0x4
iomap_readpage_actor: orig pos 323584 pos 323584, length 4096, poff 0 plen 4096, isize 420864
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x50000 count 94208 type hole startoff 0x140 startblock 1497 blockcount 0x5c
iomap_readpage_actor: orig pos 327680 pos 327680, length 94208, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 331776 pos 331776, length 90112, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 335872 pos 335872, length 86016, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 339968 pos 339968, length 81920, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 344064 pos 344064, length 77824, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 348160 pos 348160, length 73728, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 352256 pos 352256, length 69632, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 356352 pos 356352, length 65536, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 360448 pos 360448, length 61440, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 364544 pos 364544, length 57344, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 368640 pos 368640, length 53248, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 372736 pos 372736, length 49152, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 376832 pos 376832, length 45056, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 380928 pos 380928, length 40960, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 385024 pos 385024, length 36864, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 389120 pos 389120, length 32768, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 393216 pos 393216, length 28672, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 397312 pos 397312, length 24576, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 401408 pos 401408, length 20480, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 405504 pos 405504, length 16384, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 409600 pos 409600, length 12288, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 413696 pos 413696, length 8192, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 417792 pos 417792, length 4096, poff 0 plen 3072, isize 420864
iomap_readpage_actor: orig pos 420864 pos 420864, length 1024, poff 3072 plen 1024, isize 420864
As you can see, it now does full page reads until the last one which
is split correctly at the block aligned EOF, reading 3072 bytes and
zeroing the last 1024 bytes. The original version of the patch got
this right, but it got another case wrong.
The EOF detection crossing really needs to the the original length
as plen, while it starts at the end of the block, will be shortened
as up-to-date blocks are found on the page. This means "orig_pos +
plen" no longer points to the end of the page, and so will not
correctly detect EOF crossing. Hence we have to use the length
passed in to detect this partial page case:
xfs_filemap_fault: dev 259:1 ino 0x43 write_fault 0
xfs_vm_readpage: dev 259:1 ino 0x43 nr_pages 1
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2c000 count 4096 type hole startoff 0xb0 startblock 282 blockcount 0x4
iomap_readpage_actor: orig pos 180224 pos 181248, length 4096, poff 1024 plen 2048, isize 183296
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2cc00 count 1024 type hole startoff 0xb3 startblock 285 blockcount 0x1
iomap_readpage_actor: orig pos 183296 pos 183296, length 1024, poff 3072 plen 1024, isize 183296
Heere we see a trace where the first block on the EOF page is up to
date, hence poff = 1024 bytes. The offset into the page of EOF is
3072, so the range we want to read is 1024 - 3071, and the range we
want to zero is 3072 - 4095. You can see this is split correctly
now.
This fixes the stale data beyond EOF problem that fsx quickly
uncovers on 1k block size filesystems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4721a60109 ]
When doing direct IO to a pipe for do_splice_direct(), then pipe is
trivial to fill up and overflow as it can only hold 16 pages. At
this point bio_iov_iter_get_pages() then returns -EFAULT, and we
abort the IO submission process. Unfortunately, iomap_dio_rw()
propagates the error back up the stack.
The error is converted from the EFAULT to EAGAIN in
generic_file_splice_read() to tell the splice layers that the pipe
is full. do_splice_direct() completely fails to handle EAGAIN errors
(it aborts on error) and returns EAGAIN to the caller.
copy_file_write() then completely fails to handle EAGAIN as well,
and so returns EAGAIN to userspace, having failed to copy the data
it was asked to.
Avoid this whole steaming pile of fail by having iomap_dio_rw()
silently swallow EFAULT errors and so do short reads.
To make matters worse, iomap_dio_actor() has a stale data exposure
bug bio_iov_iter_get_pages() fails - it does not zero the tail block
that it may have been left uncovered by partial IO. Fix the error
handling case to drop to the sub-block zeroing rather than
immmediately returning the -EFAULT error.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b450672fb6 ]
If we are doing sub-block dio that extends EOF, we need to zero
the unused tail of the block to initialise the data in it it. If we
do not zero the tail of the block, then an immediate mmap read of
the EOF block will expose stale data beyond EOF to userspace. Found
with fsx running sub-block DIO sizes vs MAPREAD/MAPWRITE operations.
Fix this by detecting if the end of the DIO write is beyond EOF
and zeroing the tail if necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0929d85800 ]
When we write into an unwritten extent via direct IO, we dirty
metadata on IO completion to convert the unwritten extent to
written. However, when we do the FUA optimisation checks, the inode
may be clean and so we issue a FUA write into the unwritten extent.
This means we then bypass the generic_write_sync() call after
unwritten extent conversion has ben done and we don't force the
modified metadata to stable storage.
This violates O_DSYNC semantics. The window of exposure is a single
IO, as the next DIO write will see the inode has dirty metadata and
hence will not use the FUA optimisation. Calling
generic_write_sync() after completion of the second IO will also
sync the first write and it's metadata.
Fix this by avoiding the FUA optimisation when writing to unwritten
extents.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f25dad19ba ]
A recent update to smatch is causing it to report the error "we previously
assumed 'm_entry->vsi_list_info' could be null". Fix that.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0c9fd9b77 ]
ice_napi_poll is hard-coded to return zero when it's done. It should
instead return the work done (if any work was done). The only time it
should return zero is if an interrupt or poll is handled and no work
is performed. So change the return value to be the minimum of work
done or budget-1.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1a2004841 ]
In rx_alloc_pkts(), there is a loop call of tasklet, which causes
100% cpu utilization, even no packets are being received. This patch
fixes this bug.
Signed-off-by: Xue Chaojing <xuechaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ea72dc943 ]
In add_mac_addr(), if the MAC address is a muliticast address,
it will not be set, which causes the network card fail to receive
the multicast packet. This patch fixes this bug.
Signed-off-by: Xue Chaojing <xuechaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f9f71be84 ]
The extent shifting code uses a flush and invalidate mechainsm prior
to shifting extents around. This is similar to what
xfs_free_file_space() does, but it doesn't take into account things
like page cache vs block size differences, and it will fail if there
is a page that it currently busy.
xfs_flush_unmap_range() handles all of these cases, so just convert
xfs_prepare_shift() to us that mechanism rather than having it's own
special sauce.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab60075f2a ]
The F81532/534 had a internal configuration space to save & control
IC state with address F81534_CUSTOM_ADDRESS_START (0x2f00). Layout
as following:
+00h: to indicate the section is valid
+01h~04h: UART Mode & port availability
+05h~08h: Output pin control on IC power on
+09h~12h: Output pin control on working <-- New added
Old driver will use +05~08h as default on working, but newer IC will
configed with shutdown mode(7) in 05h~08h and working mode with RS232(1)
in 09h~12h. It'll make mainstream driver not working.
This patch will make mainstream driver compatible older and newer IC.
If using a old IC, the +05h~08h will be 00h~06h, we'll direct apply it.
If using a new IC, the +05h~08h will be 07h or larger, we'll read +09h~12h
to apply newer configuration.
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1abf67217 ]
The stub implementation of _set_load() returns a mode value which is
within the bounds of valid return codes for success (the documentation
just says that failures are negative error codes) but not sensible or
what the actual implementation does. Fix it to just return 0.
Reported-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02968ccf01 ]
Now sctp increases sk_wmem_alloc by 1 when doing set_owner_w for the
skb allocked in sctp_packet_transmit and decreases by 1 when freeing
this skb.
But when this skb goes through networking stack, some subcomponents
might change skb->truesize and add the same amount on sk_wmem_alloc.
However sctp doesn't know the amount to decrease by, it would cause
a leak on sk->sk_wmem_alloc and the sock can never be freed.
Xiumei found this issue when it hit esp_output_head() by using sctp
over ipsec, where skb->truesize is added and so is sk->sk_wmem_alloc.
Since sctp has used sk_wmem_queued to count for writable space since
Commit cd305c74b0 ("sctp: use sk_wmem_queued to check for writable
space"), it's ok to fix it by counting sk_wmem_alloc by skb truesize
in sctp_packet_transmit.
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c73ac2f8b ]
This patch fixes definition of I2S1 clock gate register for rk3328.
Current setting is not related I2S clocks.
- bit6 of CRU_CLKGATE_CON0 means clk_ddrmon_en
- bit6 of CRU_CLKGATE_CON1 means clk_i2s1_en
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13c9aaf7fa ]
Scan through the whole array to see if an update is needed. While we're
at it, use sizeof() to be safe against any possible type changes in the
future.
The bug here is that we wouldn't sync per-cpu counters into global ones
if there was an update of numa_stats for higher cpus. Highly
theoretical one though because it is much more probable that zone_stats
are updated so we would refresh anyway. So I wouldn't bother to mark
this for stable, yet something nice to fix.
[mhocko@suse.com: changelog enhancement]
Link: http://lkml.kernel.org/r/1541601517-17282-1-git-send-email-janne.huttunen@nokia.com
Fixes: 1d90ca897c ("mm: update NUMA counter threshold size")
Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91c6ada69f ]
Commit a1547e0bca ("firmware: raspberrypi: Remove VLA usage")
moved away from VLA's to a fixed maximum size for mailbox data.
However, some mailbox calls use larger data buffers
than the maximum allowed in that change. This fix therefor
moves from using fixed buffers to kmalloc to ensure all sizes
are catered for.
There is some documentation, which is somewhat out of date,
on the mailbox calls here :
https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface
Fixes: a1547e0bca ("firmware: raspberrypi: Remove VLA usage")
Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 688cd642ba ]
adt7316_i2c_read function nowhere sets the data field.
It is necessary to have an appropriate value for it.
Hence, assign the value stored in 'ret' variable to data field.
This is an ancient bug, and as no one seems to have noticed,
probably no sense in applying it to stable.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ed0785577 ]
When attempting to setup up a gpio hog, device probing will repeatedly
fail with -EPROBE_DEFERED errors. It is caused by a circular dependency
between the gpio and pinctrl frameworks. If the gpio-ranges property is
present in device tree, then the gpio framework will handle the gpio pin
registration and eliminate the circular dependency.
See Christian Lamparter's commit a86caa9ba5 ("pinctrl: msm: fix
gpio-hog related boot issues") for a detailed commit message that
explains the issue in much more detail. The code comment in this commit
came from Christian's commit.
I did not test this change against any hardware supported by this
particular driver, however I was able to validate this same fix works
for pinctrl-spmi-gpio.c using a LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1d4445abf ]
s/_/-/ for node names.
It fixes warnings like this:
... Warning (node_name_chars_strict): /cpu_opp_table:
Character '_' not recommended in node name ...
Issues reported by make dtbs W=12
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eb4942b66 ]
Currently used scalar multiplication algorithm (Matthieu Rivain, 2011)
have invalid values for scalar == 1, n-1, and for regularized version
n-2, which was previously not checked. Verify that they are not used as
private keys.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 749a5068f2 ]
Use the correct compatible for the new protocol used by the firmware
on the touch controller, the GPIO wakeup isn't used in that case.
Also eGalax touch needs axis swapping, just as with the RMI4 touch.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b4f8ac2f1 ]
We can have holes in clock_roles with interface clock missing for
example. Currently getting an optional clock will fail if there are
only a functional clock and an optional clock.
Fixes: 09dfe58107 ("bus: ti-sysc: Add handling for clkctrl opt clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41bb5769b7 ]
The current condition makes it difficult to compile the amlogic/
drivers with COMPILE_TEST, or without ARCH_MESON in general.
Fixes kbuild errors with patch series that depend on drivers in that
directory, for instance the meson video decoder.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c902936e5 ]
This was introduced with v4.18 commit 8c3d20aada ("scsi: zfcp: fix
missing REC trigger trace for all objects in ERP_FAILED") but would now
suppress helpful -Wswitch compiler warnings when building with W=1 such as
the following forced example:
drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_handle_failed':
drivers/s390/scsi/zfcp_erp.c:126:2: warning: enumeration value 'ZFCP_ERP_ACTION_REOPEN_PORT_FORCED' not handled in switch [-Wswitch]
switch (want) {
^~~~~~
But then again, only with W=1 we would notice unhandled enum cases.
Without the default cases and a missed unhandled enum case, the code might
perform unforeseen things we might not want...
As of today, we never run through the removed default case, so removing it
is no functional change. In the future, we never should run through a
default case but introduce the necessary specific case(s) to handle new
functionality.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724e144387 ]
The CDB is just a part inside of FCP_CMND, see zfcp_fc_scsi_to_fcp().
While at it, fix the device driver reaction: adapter not LUN shutdown.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddc49acb65 ]
We already have a workaround for a couple of switches whose internal
PHYs only have the Marvel OUI, but no model number. We detect such
PHYs and give them the 6390 ID as the model number. However the
mv88e6161 has two SERDES interfaces in the same address range as its
internal PHYs. These suffer from the same problem, the Marvell OUI,
but no model number. As a result, these SERDES interfaces were getting
the same PHY ID as the mv88e6390, even though they are not PHYs, and
the Marvell PHY driver was trying to drive them.
Add a special case to stop this from happen.
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
