David Howells <dhowells@redhat.com> says:
Here are some miscellaneous fixes and changes for netfslib and the ceph and
nfs filesystems:
(1) Ignore silly-rename files from afs and nfs when building the header
archive in a kernel build.
(2) netfs: Fix the way read result collection applies results to folios
when each folio is being read by multiple subrequests and the results
come out of order.
(3) netfs: Fix ENOMEM handling in buffered reads.
(4) nfs: Fix an oops in nfs_netfs_init_request() when copying to the cache.
(5) cachefiles: Parse the "secctx" command immediately to get the correct
error rather than leaving it to the "bind" command.
(6) netfs: Remove a redundant smp_rmb(). This isn't a bug per se and
could be deferred.
(7) netfs: Fix missing barriers by using clear_and_wake_up_bit().
(8) netfs: Work around recursion in read retry by failing and abandoning
the retried subrequest if no I/O is performed.
[!] NOTE: This only works around the recursion problem if the
recursion keeps returning no data. If the server manages, say, to
repeatedly return a single byte of data faster than the retry
algorithm can complete, it will still recurse and the stack
overrun may still occur. Actually fixing this requires quite an
intrusive change which will hopefully make the next merge window.
(9) netfs: Fix the clearance of a folio_queue when unlocking the page if
we're going to want to subsequently send the queue for copying to the
cache (if, for example, we're using ceph).
(10) netfs: Fix the lack of cancellation of copy-to-cache when the cache
for a file is temporarily disabled (for example when a DIO write is
done to the file). This patch and (9) fix hangs with ceph.
With these patches, I can run xfstest -g quick to completion on ceph with a
local cache.
The patches can also be found here with a bonus cifs patch:
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git/log/?h=netfs-fixes
* patches from https://lore.kernel.org/r/20241213135013.2964079-1-dhowells@redhat.com:
netfs: Fix is-caching check in read-retry
netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled
netfs: Fix ceph copy to cache on write-begin
netfs: Work around recursion by abandoning retry if nothing read
netfs: Fix missing barriers by using clear_and_wake_up_bit()
netfs: Remove redundant use of smp_rmb()
cachefiles: Parse the "secctx" immediately
nfs: Fix oops in nfs_netfs_init_request() when copying to cache
netfs: Fix enomem handling in buffered reads
netfs: Fix non-contiguous donation between completed reads
kheaders: Ignore silly-rename files
Link: https://lore.kernel.org/r/20241213135013.2964079-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
netfs: Fix is-caching check in read-retry
The read-retry code checks the NETFS_RREQ_COPY_TO_CACHE flag to determine
if there might be failed reads from the cache that need turning into reads
from the server, with the intention of skipping the complicated part if it
can. The code that set the flag, however, got lost during the read-side
rewrite.
Fix the check to see if the cache_resources are valid instead. The flag
can then be removed.
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3752048.1734381285@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
When the caching for a cookie is temporarily disabled (e.g. due to a DIO
write on that file), future copying to the cache for that file is disabled
until all fds open on that file are closed. However, if netfslib is using
the deprecated PG_private_2 method (such as is currently used by ceph), and
decides it wants to copy to the cache, netfs_advance_write() will just bail
at the first check seeing that the cache stream is unavailable, and
indicate that it dealt with all the content.
This means that we have no subrequests to provide notifications to drive
the state machine or even to pin the request and the request just gets
discarded, leaving the folios with PG_private_2 set.
Fix this by jumping directly to cancel the request if the cache is not
available. That way, we don't remove mark3 from the folio_queue list and
netfs_pgpriv2_cancel() will clean up the folios.
This was found by running the generic/013 xfstest against ceph with an
active cache and the "-o fsc" option passed to ceph. That would usually
hang
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Closes: https://lore.kernel.org/r/CAKPOu+_4m80thNy5_fvROoxBm689YtA0dZ-=gcmkzwYSY4syqw@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241213135013.2964079-11-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
At the end of netfs_unlock_read_folio() in which folios are marked
appropriately for copying to the cache (either with by being marked dirty
and having their private data set or by having PG_private_2 set) and then
unlocked, the folio_queue struct has the entry pointing to the folio
cleared. This presents a problem for netfs_pgpriv2_write_to_the_cache(),
which is used to write folios marked with PG_private_2 to the cache as it
expects to be able to trawl the folio_queue list thereafter to find the
relevant folios, leading to a hang.
Fix this by not clearing the folio_queue entry if we're going to do the
deprecated copy-to-cache. The clearance will be done instead as the folios
are written to the cache.
This can be reproduced by starting cachefiles, mounting a ceph filesystem
with "-o fsc" and writing to it.
Fixes: 796a404964 ("netfs: In readahead, put the folio refs as soon extracted")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Closes: https://lore.kernel.org/r/CAKPOu+_4m80thNy5_fvROoxBm689YtA0dZ-=gcmkzwYSY4syqw@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241213135013.2964079-10-dhowells@redhat.com
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
cc: Jeff Layton <jlayton@kernel.org>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
syzkaller reported recursion with a loop of three calls (netfs_rreq_assess,
netfs_retry_reads and netfs_rreq_terminated) hitting the limit of the stack
during an unbuffered or direct I/O read.
There are a number of issues:
(1) There is no limit on the number of retries.
(2) A subrequest is supposed to be abandoned if it does not transfer
anything (NETFS_SREQ_NO_PROGRESS), but that isn't checked under all
circumstances.
(3) The actual root cause, which is this:
if (atomic_dec_and_test(&rreq->nr_outstanding))
netfs_rreq_terminated(rreq, ...);
When we do a retry, we bump the rreq->nr_outstanding counter to
prevent the final cleanup phase running before we've finished
dispatching the retries. The problem is if we hit 0, we have to do
the cleanup phase - but we're in the cleanup phase and end up
repeating the retry cycle, hence the recursion.
Work around the problem by limiting the number of retries. This is based
on Lizhi Xu's patch[1], and makes the following changes:
(1) Replace NETFS_SREQ_NO_PROGRESS with NETFS_SREQ_MADE_PROGRESS and make
the filesystem set it if it managed to read or write at least one byte
of data. Clear this bit before issuing a subrequest.
(2) Add a ->retry_count member to the subrequest and increment it any time
we do a retry.
(3) Remove the NETFS_SREQ_RETRYING flag as it is superfluous with
->retry_count. If the latter is non-zero, we're doing a retry.
(4) Abandon a subrequest if retry_count is non-zero and we made no
progress.
(5) Use ->retry_count in both the write-side and the read-size.
[?] Question: Should I set a hard limit on retry_count in both read and
write? Say it hits 50, we always abandon it. The problem is that
these changes only mitigate the issue. As long as it made at least one
byte of progress, the recursion is still an issue. This patch
mitigates the problem, but does not fix the underlying cause. I have
patches that will do that, but it's an intrusive fix that's currently
pending for the next merge window.
The oops generated by KASAN looks something like:
BUG: TASK stack guard page was hit at ffffc9000482ff48 (stack is ffffc90004830000..ffffc90004838000)
Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN NOPTI
...
RIP: 0010:mark_lock+0x25/0xc60 kernel/locking/lockdep.c:4686
...
mark_usage kernel/locking/lockdep.c:4646 [inline]
__lock_acquire+0x906/0x3ce0 kernel/locking/lockdep.c:5156
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825
local_lock_acquire include/linux/local_lock_internal.h:29 [inline]
___slab_alloc+0x123/0x1880 mm/slub.c:3695
__slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908
__slab_alloc_node mm/slub.c:3961 [inline]
slab_alloc_node mm/slub.c:4122 [inline]
kmem_cache_alloc_noprof+0x2a7/0x2f0 mm/slub.c:4141
radix_tree_node_alloc.constprop.0+0x1e8/0x350 lib/radix-tree.c:253
idr_get_free+0x528/0xa40 lib/radix-tree.c:1506
idr_alloc_u32+0x191/0x2f0 lib/idr.c:46
idr_alloc+0xc1/0x130 lib/idr.c:87
p9_tag_alloc+0x394/0x870 net/9p/client.c:321
p9_client_prepare_req+0x19f/0x4d0 net/9p/client.c:644
p9_client_zc_rpc.constprop.0+0x105/0x880 net/9p/client.c:793
p9_client_read_once+0x443/0x820 net/9p/client.c:1570
p9_client_read+0x13f/0x1b0 net/9p/client.c:1534
v9fs_issue_read+0x115/0x310 fs/9p/vfs_addr.c:74
netfs_retry_read_subrequests fs/netfs/read_retry.c:60 [inline]
netfs_retry_reads+0x153a/0x1d00 fs/netfs/read_retry.c:232
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
...
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_dispatch_unbuffered_reads fs/netfs/direct_read.c:103 [inline]
netfs_unbuffered_read fs/netfs/direct_read.c:127 [inline]
netfs_unbuffered_read_iter_locked+0x12f6/0x19b0 fs/netfs/direct_read.c:221
netfs_unbuffered_read_iter+0xc5/0x100 fs/netfs/direct_read.c:256
v9fs_file_read_iter+0xbf/0x100 fs/9p/vfs_file.c:361
do_iter_readv_writev+0x614/0x7f0 fs/read_write.c:832
vfs_readv+0x4cf/0x890 fs/read_write.c:1025
do_preadv fs/read_write.c:1142 [inline]
__do_sys_preadv fs/read_write.c:1192 [inline]
__se_sys_preadv fs/read_write.c:1187 [inline]
__x64_sys_preadv+0x22d/0x310 fs/read_write.c:1187
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Closes: https://syzkaller.appspot.com/bug?extid=1fc6f64c40a9d143cfb6
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241108034020.3695718-1-lizhi.xu@windriver.com/ [1]
Link: https://lore.kernel.org/r/20241213135013.2964079-9-dhowells@redhat.com
Tested-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com
Suggested-by: Lizhi Xu <lizhi.xu@windriver.com>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Reported-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use clear_and_wake_up_bit() rather than something like:
clear_bit_unlock(NETFS_RREQ_IN_PROGRESS, &rreq->flags);
wake_up_bit(&rreq->flags, NETFS_RREQ_IN_PROGRESS);
as there needs to be a barrier inserted between which is present in
clear_and_wake_up_bit().
Fixes: 288ace2f57 ("netfs: New writeback implementation")
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241213135013.2964079-8-dhowells@redhat.com
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
cc: Zilin Guan <zilin@seu.edu.cn>
cc: Akira Yokosawa <akiyks@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The function netfs_unbuffered_write_iter_locked() in
fs/netfs/direct_write.c contains an unnecessary smp_rmb() call after
wait_on_bit(). Since wait_on_bit() already incorporates a memory barrier
that ensures the flag update is visible before the function returns, the
smp_rmb() provides no additional benefit and incurs unnecessary overhead.
This patch removes the redundant barrier to simplify and optimize the code.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241207021952.2978530-1-zilin@seu.edu.cn/
Link: https://lore.kernel.org/r/20241213135013.2964079-7-dhowells@redhat.com
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
cc: Akira Yokosawa <akiyks@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Instead of storing an opaque string, call security_secctx_to_secid()
right in the "secctx" command handler and store only the numeric
"secid". This eliminates an unnecessary string allocation and allows
the daemon to receive errors when writing the "secctx" command instead
of postponing the error to the "bind" command handler. For example,
if the kernel was built without `CONFIG_SECURITY`, "bind" will return
`EOPNOTSUPP`, but the daemon doesn't know why. With this patch, the
"secctx" will instead return `EOPNOTSUPP` which is the right context
for this error.
This patch adds a boolean flag `have_secid` because I'm not sure if we
can safely assume that zero is the special secid value for "not set".
This appears to be true for SELinux, Smack and AppArmor, but since
this attribute is not documented, I'm unable to derive a stable
guarantee for that.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241209141554.638708-1-max.kellermann@ionos.com/
Link: https://lore.kernel.org/r/20241213135013.2964079-6-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
When netfslib wants to copy some data that has just been read on behalf of
nfs, it creates a new write request and calls nfs_netfs_init_request() to
initialise it, but with a NULL file pointer. This causes
nfs_file_open_context() to oops - however, we don't actually need the nfs
context as we're only going to write to the cache.
Fix this by just returning if we aren't given a file pointer and emit a
warning if the request was for something other than copy-to-cache.
Further, fix nfs_netfs_free_request() so that it doesn't try to free the
context if the pointer is NULL.
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Closes: https://lore.kernel.org/r/CAKPOu+9DyMbKLhyJb7aMLDTb=Fh0T8Teb9sjuf_pze+XWT1VaQ@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241213135013.2964079-5-dhowells@redhat.com
cc: Trond Myklebust <trondmy@kernel.org>
cc: Anna Schumaker <anna@kernel.org>
cc: Dave Wysochanski <dwysocha@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-nfs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
When a read subrequest finishes, if it doesn't have sufficient coverage to
complete the folio(s) covering either side of it, it will donate the excess
coverage to the adjacent subrequests on either side, offloading
responsibility for unlocking the folio(s) covered to them.
Now, preference is given to donating down to a lower file offset over
donating up because that check is done first - but there's no check that
the lower subreq is actually contiguous, and so we can end up donating
incorrectly.
The scenario seen[1] is that an 8MiB readahead request spanning four 2MiB
folios is split into eight 1MiB subreqs (numbered 1 through 8). These
terminate in the order 1,6,2,5,3,7,4,8. What happens is:
- 1 donates to 2
- 6 donates to 5
- 2 completes, unlocking the first folio (with 1).
- 5 completes, unlocking the third folio (with 6).
- 3 donates to 4
- 7 donates to 4 incorrectly
- 4 completes, unlocking the second folio (with 3), but can't use
the excess from 7.
- 8 donates to 4, also incorrectly.
Fix this by preventing downward donation if the subreqs are not contiguous
(in the example above, 7 donates to 4 across the gap left by 5 and 6).
Reported-by: Shyam Prasad N <nspmangalore@gmail.com>
Closes: https://lore.kernel.org/r/CANT5p=qBwjBm-D8soFVVtswGEfmMtQXVW83=TNfUtvyHeFQZBA@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/526707.1733224486@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/20241213135013.2964079-3-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Tell tar to ignore silly-rename files (".__afs*" and ".nfs*") when building
the header archive. These occur when a file that is open is unlinked
locally, but hasn't yet been closed. Such files are visible to the user
via the getdents() syscall and so programs may want to do things with them.
During the kernel build, such files may be made during the processing of
header files and the cleanup may get deferred by fput() which may result in
tar seeing these files when it reads the directory, but they may have
disappeared by the time it tries to open them, causing tar to fail with an
error. Further, we don't want to include them in the tarball if they still
exist.
With CONFIG_HEADERS_INSTALL=y, something like the following may be seen:
find: './kernel/.tmp_cpio_dir/include/dt-bindings/reset/.__afs2080': No such file or directory
tar: ./include/linux/greybus/.__afs3C95: File removed before we read it
The find warning doesn't seem to cause a problem.
Fix this by telling tar when called from in gen_kheaders.sh to exclude such
files. This only affects afs and nfs; cifs uses the Windows Hidden
attribute to prevent the file from being seen.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241213135013.2964079-2-dhowells@redhat.com
cc: Masahiro Yamada <masahiroy@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Encoding file handles is usually performed by a filesystem >encode_fh()
method that may fail for various reasons.
The legacy users of exportfs_encode_fh(), namely, nfsd and
name_to_handle_at(2) syscall are ready to cope with the possibility
of failure to encode a file handle.
There are a few other users of exportfs_encode_{fh,fid}() that
currently have a WARN_ON() assertion when ->encode_fh() fails.
Relax those assertions because they are wrong.
The second linked bug report states commit 16aac5ad1f ("ovl: support
encoding non-decodable file handles") in v6.6 as the regressing commit,
but this is not accurate.
The aforementioned commit only increases the chances of the assertion
and allows triggering the assertion with the reproducer using overlayfs,
inotify and drop_caches.
Triggering this assertion was always possible with other filesystems and
other reasons of ->encode_fh() failures and more particularly, it was
also possible with the exact same reproducer using overlayfs that is
mounted with options index=on,nfs_export=on also on kernels < v6.6.
Therefore, I am not listing the aforementioned commit as a Fixes commit.
Backport hint: this patch will have a trivial conflict applying to
v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.
Reported-by: syzbot+ec07f6f5ce62b858579f@syzkaller.appspotmail.com
Tested-by: syzbot+ec07f6f5ce62b858579f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-unionfs/671fd40c.050a0220.4735a.024f.GAE@google.com/
Reported-by: Dmitry Safonov <dima@arista.com>
Closes: https://lore.kernel.org/linux-fsdevel/CAGrbwDTLt6drB9eaUagnQVgdPBmhLfqqxAf3F+Juqy_o6oP8uw@mail.gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20241219115301.465396-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
fs/file.c should include include/linux/init_task.h for
declaration of init_files. This fixes the sparse warning:
fs/file.c:501:21: warning: symbol 'init_files' was not declared. Should it be static?
Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Link: https://lore.kernel.org/r/20241217071836.2634868-1-zhangkunbo@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit 1fa08aece4 ("nsfs: convert to path_from_stashed() helper") reused
nsfs dentry's d_fsdata, which no longer contains a pointer to
proc_ns_operations.
Fix the remaining use in is_mnt_ns_file().
Fixes: 1fa08aece4 ("nsfs: convert to path_from_stashed() helper")
Cc: stable@vger.kernel.org # v6.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20241211121118.85268-1-mszeredi@redhat.com
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Long Li <leo.lilong@huawei.com> says:
This patch series fixes zero padding data issues in concurrent append
write scenarios. A detailed problem description and solution can be
found in patch 2. Patch 1 is introduced as preparation for the fix in
patch 2, eliminating the need to resample inode size for io_size
trimming and avoiding issues caused by inode size changes during
concurrent writeback and truncate operations.
* patches from https://lore.kernel.org/r/20241209114241.3725722-1-leo.lilong@huawei.com:
iomap: fix zero padding data issue in concurrent append writes
iomap: pass byte granular end position to iomap_add_to_ioend
Link: https://lore.kernel.org/r/20241209114241.3725722-1-leo.lilong@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
During concurrent append writes to XFS filesystem, zero padding data
may appear in the file after power failure. This happens due to imprecise
disk size updates when handling write completion.
Consider this scenario with concurrent append writes same file:
Thread 1: Thread 2:
------------ -----------
write [A, A+B]
update inode size to A+B
submit I/O [A, A+BS]
write [A+B, A+B+C]
update inode size to A+B+C
<I/O completes, updates disk size to min(A+B+C, A+BS)>
<power failure>
After reboot:
1) with A+B+C < A+BS, the file has zero padding in range [A+B, A+B+C]
|< Block Size (BS) >|
|DDDDDDDDDDDDDDDD0000000000000000|
^ ^ ^
A A+B A+B+C
(EOF)
2) with A+B+C > A+BS, the file has zero padding in range [A+B, A+BS]
|< Block Size (BS) >|< Block Size (BS) >|
|DDDDDDDDDDDDDDDD0000000000000000|00000000000000000000000000000000|
^ ^ ^ ^
A A+B A+BS A+B+C
(EOF)
D = Valid Data
0 = Zero Padding
The issue stems from disk size being set to min(io_offset + io_size,
inode->i_size) at I/O completion. Since io_offset+io_size is block
size granularity, it may exceed the actual valid file data size. In
the case of concurrent append writes, inode->i_size may be larger
than the actual range of valid file data written to disk, leading to
inaccurate disk size updates.
This patch modifies the meaning of io_size to represent the size of
valid data within EOF in an ioend. If the ioend spans beyond i_size,
io_size will be trimmed to provide the file with more accurate size
information. This is particularly useful for on-disk size updates
at completion time.
After this change, ioends that span i_size will not grow or merge with
other ioends in concurrent scenarios. However, these cases that need
growth/merging rarely occur and it seems no noticeable performance impact.
Although rounding up io_size could enable ioend growth/merging in these
scenarios, we decided to keep the code simple after discussion [1].
Another benefit is that it makes the xfs_ioend_is_append() check more
accurate, which can reduce unnecessary end bio callbacks of xfs_end_bio()
in certain scenarios, such as repeated writes at the file tail without
extending the file size.
Link [1]: https://patchwork.kernel.org/project/xfs/patch/20241113091907.56937-1-leo.lilong@huawei.com
Fixes: ae259a9c85 ("fs: introduce iomap infrastructure") # goes further back than this
Signed-off-by: Long Li <leo.lilong@huawei.com>
Link: https://lore.kernel.org/r/20241209114241.3725722-3-leo.lilong@huawei.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This is a preparatory patch for fixing zero padding issues in concurrent
append write scenarios. In the following patches, we need to obtain
byte-granular writeback end position for io_size trimming after EOF
handling.
Due to concurrent writeback and truncate operations, inode size may
shrink. Resampling inode size would force writeback code to handle the
newly appeared post-EOF blocks, which is undesirable. As Dave
explained in [1]:
"Really, the issue is that writeback mappings have to be able to
handle the range being mapped suddenly appear to be beyond EOF.
This behaviour is a longstanding writeback constraint, and is what
iomap_writepage_handle_eof() is attempting to handle.
We handle this by only sampling i_size_read() whilst we have the
folio locked and can determine the action we should take with that
folio (i.e. nothing, partial zeroing, or skip altogether). Once
we've made the decision that the folio is within EOF and taken
action on it (i.e. moved the folio to writeback state), we cannot
then resample the inode size because a truncate may have started
and changed the inode size."
To avoid resampling inode size after EOF handling, we convert end_pos
to byte-granular writeback position and return it from EOF handling
function.
Since iomap_set_range_dirty() can handle unaligned lengths, this
conversion has no impact on it. However, iomap_find_dirty_range()
requires aligned start and end range to find dirty blocks within the
given range, so the end position needs to be rounded up when passed
to it.
LINK [1]: https://lore.kernel.org/linux-xfs/Z1Gg0pAa54MoeYME@localhost.localdomain/
Signed-off-by: Long Li <leo.lilong@huawei.com>
Link: https://lore.kernel.org/r/20241209114241.3725722-2-leo.lilong@huawei.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When committing transaction in jbd2_journal_commit_transaction(), the
disk caches for the filesystem device should be flushed before updating
the journal tail sequence. However, this step is missed if the journal
is not located on the filesystem device. As a result, the filesystem may
become inconsistent following a power failure or system crash. Fix it by
ensuring that the filesystem device is flushed appropriately.
Fixes: 3339578f05 ("jbd2: cleanup journal tail after transaction commit")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20241203014407.805916-3-yi.zhang@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit '6a3afb6ac6df ("jbd2: increase the journal IO's priority")'
increases the priority of journal I/O by marking I/O with the
JBD2_JOURNAL_REQ_FLAGS. However, that commit missed the revoke buffers,
so also addresses that kind of I/Os.
Fixes: 6a3afb6ac6 ("jbd2: increase the journal IO's priority")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20241203014407.805916-2-yi.zhang@huaweicloud.com
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
qnx6_checkroot() had been using weirdly spelled initializer - it needed
to initialize 3-element arrays of char and it used NUL-padded
3-character string literals (i.e. 4-element initializers, with
completely pointless zeroes at the end).
That had been spotted by gcc-15[*]; prior to that gcc quietly dropped
the 4th element of initializers.
However, none of that had been needed in the first place - all this
array is used for is checking that the first directory entry in root
directory is "." and the second - "..". The check had been expressed as
a loop, using that match_root[] array. Since there is no chance that we
ever want to extend that list of entries, the entire thing is much too
fancy for its own good; what we need is just a couple of explicit
memcmp() and that's it.
[*]: fs/qnx6/inode.c: In function ‘qnx6_checkroot’:
fs/qnx6/inode.c:182:41: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
182 | static char match_root[2][3] = {".\0\0", "..\0"};
| ^~~~~~~
fs/qnx6/inode.c:182:50: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
182 | static char match_root[2][3] = {".\0\0", "..\0"};
| ^~~~~~
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Link: https://lore.kernel.org/r/20241004195132.1393968-1-brahmajit.xyz@gmail.com
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In the syzbot reproducer, the hfs_cat_rec for the root dir has type
HFS_CDR_FIL after being read with hfs_bnode_read() in hfs_super_fill().
This indicates it should be used as an hfs_cat_file, which is 102 bytes.
Only the first 70 bytes of that struct are initialized, however,
because the entrylength passed into hfs_bnode_read() is still the length of
a directory record. This causes uninitialized values to be used later on,
when the hfs_cat_rec union is treated as the larger hfs_cat_file struct.
Add a check to make sure the retrieved record has the correct type
for the root directory (HFS_CDR_DIR), and make sure we load the correct
number of bytes for a directory record.
Reported-by: syzbot+2db3c7526ba68f4ea776@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2db3c7526ba68f4ea776
Tested-by: syzbot+2db3c7526ba68f4ea776@syzkaller.appspotmail.com
Tested-by: Leo Stone <leocstone@gmail.com>
Signed-off-by: Leo Stone <leocstone@gmail.com>
Link: https://lore.kernel.org/r/20241201051420.77858-1-leocstone@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
core: add of based component probing
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
Instead of a delicate dance between drivers and device tree quirks, this
change introduces a simple I2C component probe function. For a given
class of devices on the same I2C bus, it will go through all of them,
doing a simple I2C read transfer and see which one of them responds. It
will then enable the device that responds.
-----BEGIN PGP SIGNATURE-----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=MAxU
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
- Remove unused bprintf() function
bprintf() was added with the rest of the "bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0yNShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJ6AP9i8pFOjeMfb2hOBpJTzORkIXEbz5nG
OCK/5aeSdjxy8QEAqafBSr5IQOxaTCFve1p7WSwdgmi2ZLmqEasaud0LmAk=
=5bp1
-----END PGP SIGNATURE-----
Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function __udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
-----BEGIN PGP SIGNATURE-----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=X4bb
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause some
virtual interrupts to get lost
- More platform_driver::remove() conversion
-----BEGIN PGP SIGNATURE-----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=xeni
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
by erratum 1386 so that the matching loop actually terminates instead of
going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the relocatable
kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN has been
disabled
-----BEGIN PGP SIGNATURE-----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=RC2M
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a terminating zero end-element to the array describing AMD CPUs
affected by erratum 1386 so that the matching loop actually
terminates instead of going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the
relocatable kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN
has been disabled
* tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
x86/Documentation: Update algo in init_size description of boot protocol
x86/microcode/AMD: Flush patch buffer mapping after application
x86/mm: Carve out INVLPG inline asm for use by others
x86/cpu: Fix PPIN initialization
The point behind strscpy() was to once and for all avoid all the
problems with 'strncpy()' and later broken "fixed" versions like
strlcpy() that just made things worse.
So strscpy not only guarantees NUL-termination (unlike strncpy), it also
doesn't do unnecessary padding at the destination. But at the same time
also avoids byte-at-a-time reads and writes by _allowing_ some extra NUL
writes - within the size, of course - so that the whole copy can be done
with word operations.
It is also stable in the face of a mutable source string: it explicitly
does not read the source buffer multiple times (so an implementation
using "strnlen()+memcpy()" would be wrong), and does not read the source
buffer past the size (like the mis-design that is strlcpy does).
Finally, the return value is designed to be simple and unambiguous: if
the string cannot be copied fully, it returns an actual negative error,
making error handling clearer and simpler (and the caller already knows
the size of the buffer). Otherwise it returns the string length of the
result.
However, there was one final stability issue that can be important to
callers: the stability of the destination buffer.
In particular, the same way we shouldn't read the source buffer more
than once, we should avoid doing multiple writes to the destination
buffer: first writing a potentially non-terminated string, and then
terminating it with NUL at the end does not result in a stable result
buffer.
Yes, it gives the right result in the end, but if the rule for the
destination buffer was that it is _always_ NUL-terminated even when
accessed concurrently with updates, the final byte of the buffer needs
to always _stay_ as a NUL byte.
[ Note that "final byte is NUL" here is literally about the final byte
in the destination array, not the terminating NUL at the end of the
string itself. There is no attempt to try to make concurrent reads and
writes give any kind of consistent string length or contents, but we
do want to guarantee that there is always at least that final
terminating NUL character at the end of the destination array if it
existed before ]
This is relevant in the kernel for the tsk->comm[] array, for example.
Even without locking (for either readers or writers), we want to know
that while the buffer contents may be garbled, it is always a valid C
string and always has a NUL character at 'comm[TASK_COMM_LEN-1]' (and
never has any "out of thin air" data).
So avoid any "copy possibly non-terminated string, and terminate later"
behavior, and write the destination buffer only once.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa7
("vsprintf: add binary printf") but as far as I can see was never used,
unlike the other two functions in that patch.
Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=bPnr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- When removing a PCI device, only look up and remove a platform device
if there is an associated device node for which there could be a
platform device, to fix a merge window regression (Brian Norris)
* tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctrl: Unregister platform device only if one actually exists
-----BEGIN PGP SIGNATURE-----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=ZCsN
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull ima fix from Paul Moore:
"One small patch to fix a function parameter / local variable naming
snafu that went up to you in the current merge window"
* tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ima: uncover hidden variable in ima_match_rules()
-----BEGIN PGP SIGNATURE-----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=6cbB
-----END PGP SIGNATURE-----
Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
-----BEGIN PGP SIGNATURE-----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=b84h
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
- Remove a leftover struct from when the cqwait registered waiting was
transitioned to regions.
- Fix for an issue introduced in this merge window, where nop->fd might
be used uninitialized. Ensure it's always set.
- Add capping of the task_work run in local task_work mode, to prevent
bursty and long chains from adding too much latency.
- Work around xa_store() leaving ->head non-NULL if it encounters an
allocation error during storing. Just a debug trigger, and can go
away once xa_store() behaves in a more expected way for this
condition. Not a major thing as it basically requires fault injection
to trigger it.
- Fix a few mapping corner cases
- Fix KCSAN complaint on reading the table size post unlock. Again not
a "real" issue, but it's easy to silence by just keeping the reading
inside the lock that protects it.
* tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux:
io_uring/tctx: work around xa_store() allocation error issue
io_uring: fix corner case forgetting to vunmap
io_uring: fix task_work cap overshooting
io_uring: check for overflows in io_pin_pages
io_uring/nop: ensure nop->fd is always initialized
io_uring: limit local tw done
io_uring: add io_local_work_pending()
io_uring/region: return negative -E2BIG in io_create_region()
io_uring: protect register tracing
io_uring: remove io_uring_cqwait_reg_arg
* Fixes.
RISC-V:
* Svade and Svadu (accessed and dirty bit) extension support for host and
guest. This was acked on the mailing list by the RISC-V maintainer, see
https://patchew.org/linux/20240726084931.28924-1-yongxuan.wang@sifive.com/.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmdKS0QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP7hggAmt5CJesFGIuDwQgJX1KuNWAS84AX
Oq5SPZLH0XjE5YDm6AusSzvbtOhRM6mARU5/iqMRE6Mqpf4MXpP9tOo6xaDiL7+m
bOFsDYEO73WQyrIfFUCZ7dXiTbDVtQfNH8Z1yQwHPsa1d+WDYY3tLbCe5qCdqYMF
JDiB7K0cQzPDmhCwf3Zf8mW2ZRI0QsTqiuFUfVGGNgFDspWfBFBqkLCkrMNmbp9z
ye375oKb2VCe6OBJCY+Nl6tdoBUkz+CtZDCxkxuh0Uk4NmsUC9JMye9iwgU9DuI7
nagFuvpUGcgbZvrx1ly47TL+wcEFLwnBJ0xBZTGIgVoZHj/wX9GM+tSgIw==
=semZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
- ARM fixes
- RISC-V Svade and Svadu (accessed and dirty bit) extension support for
host and guest
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test
RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM
dt-bindings: riscv: Add Svade and Svadu Entries
RISC-V: Add Svade and Svadu Extensions Support
KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status
KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure
KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes
KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition
KVM: arm64: vgic: Make vgic_get_irq() more robust
KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
- sh: intc: Fix use-after-free bug in register_intc_controller()
- sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
-----BEGIN PGP SIGNATURE-----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=8ud9
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Two small fixes.
The first one by Huacai Chen addresses a runtime warning when
CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected
which occurs because the cpuinfo code on sh incorrectly uses NR_CPUS
when iterating CPUs instead of the runtime limit nr_cpu_ids.
A second fix by Dan Carpenter fixes a use-after-free bug in
register_intc_controller() which occurred as a result of improper
error handling in the interrupt controller driver code when
registering an interrupt controller during plat_irq_setup() on sh"
* tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: intc: Fix use-after-free bug in register_intc_controller()
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
- Deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE so that tests depending
on it don't run (and fail) on arm64
- Fix lockdep assert in the Arm SMMUv3 PMU driver
- Fix the port and device ID bits setting in the Arm CMN perf driver
-----BEGIN PGP SIGNATURE-----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=ZNzJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE so that tests depending
on it don't run (and fail) on arm64
- Fix lockdep assert in the Arm SMMUv3 PMU driver
- Fix the port and device ID bits setting in the Arm CMN perf driver
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm-cmn: Ensure port and device id bits are set properly
perf/arm-smmuv3: Fix lockdep assert in ->event_init()
arm64: disable ARCH_CORRECT_STACKTRACE_ON_KRETPROBE tests
since 2024.07.26:
assorted minor bug fixes
assorted platform specific tweaks
initial RAPL PSYS (SysWatt) support
Signed-off-by: Len Brown <len.brown@intel.com>
Introduce the counter as a part of global, platform counters structure.
We open the counter for only one cpu, but otherwise treat it as an
ordinary RAPL counter, allowing for grouped perf read.
The counter is disabled by default, because it's interpretation may
require additional, platform specific information, making it unsuitable
for general use.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add '+' to optstring when early scanning for --no-msr and --no-perf.
It causes option processing to stop as soon as a nonoption argument is
encountered, effectively skipping child's arguments.
Fixes: 3e4048466c ("tools/power turbostat: Add --no-msr option")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Force the --no-perf early to prevent using it as a source. User asks for
raw values, but perf returns them relative to the opening of the file
descriptor.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
On some machines, the graphics device is enumerated as
/sys/class/drm/card1 instead of /sys/class/drm/card0. The current
implementation does not handle this scenario, resulting in the loss of
graphics C6 residency and frequency information.
Add support for /sys/class/drm/card1, ensuring that turbostat can
retrieve and display the graphics columns for these platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Snapshots of the graphics sysfs knobs are taken based on file
descriptors. To optimize this process, open the files and cache the file
descriptors during the graphics probe phase. As a result, the previously
cached pathnames become redundant and are removed.
This change aims to streamline the code without altering its functionality.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, there is an inconsistency in how graphics sysfs knobs are
accessed: graphics residency sysfs knobs are opened and closed for each
read, while graphics frequency sysfs knobs are opened once and remain
open until turbostat exits. This inconsistency is confusing and adds
unnecessary code complexity.
Consolidate the access method by opening the sysfs files once and
reusing the file pointers for subsequent accesses. This approach
simplifies the code and ensures a consistent method for accessing
graphics sysfs knobs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The graphics sysfs knobs are read-only, making the use of fflush()
before reading them redundant.
Remove the unnecessary fflush() call.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
