Split the cooling device registration API into OF and non-OF variants.
Introduce thermal_cooling_device_register() for non-device-tree users
and rework thermal_of_cooling_device_register() to use the new
alloc/add split.
This removes the need for the internal __thermal_cooling_device_register()
helper and makes the separation between OF and non-OF users explicit.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-13-daniel.lezcano@oss.qualcomm.com
The SoC Thermal Management Unit (TMU) is essential for proper operation
of the SoCs. Kernel should not ask users choice of drivers when that
choice is obvious and known to the developers that answer should be
'yes' or 'module'.
Impact of making it default:
1. arm64 defconfig: No changes, already present in defconfig.
2. arm32: No changes, the driver is already selected by MACH_EXYNOS.
3. COMPILE_TEST builds: enable by default for arm32 or arm64 builds,
whenever ARCH_EXYNOS is selected. This has impact on build time and
feels logical, because if one selects ARCH_EXYNOS then probably by
default wants to build test it entirely. Kernels with COMPILE_TEST
are not supposed to be used for booting.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260526135312.8697-2-krzysztof.kozlowski@oss.qualcomm.com
Invalid temperature measurements may be observed across the temperature
range specified in the device data sheet. The invalid temperature can
be read from any remote site and from any capture or report registers.
The invalid change in temperature can be positive or negative and the
resulting temperature can be outside the calibrated range, in which
case the TSR[ORL] or TSR[ORH] bit will be set.
Workaround:
Use the raising/falling edge threshold to filter out the invalid temp.
Check the TIDR register to make sure no jump happens When reading the temp.
i.MX93 ERR052243:
(https://www.nxp.com/webapp/Download?colCode=IMX93_2P87F&appType=license)
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260430-imx93_tmu-v6-3-485459d7b54f@nxp.com
For Thermal monitor unit(TMU) used on i.MX93, the HW revision info read
from the ID register is the same the one used on some of the QorIQ
platform, but the config has some slight differance. Add i.MX93 compatible
string and corresponding code for it.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260430-imx93_tmu-v6-2-485459d7b54f@nxp.com
Add i.MX93 compatible string 'fsl,imx93-tmu' because Thermal monitor
unit(TMU) on i.MX93 has differences with QorIQ platform and not fully
compatible with existing Platform, such as fsl,qoriq-tmu.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260430-imx93_tmu-v6-1-485459d7b54f@nxp.com
The thermal sensor on K1 supports monitoring five temperature zones.
The driver registers these sensors with the thermal framework
and supports standard operations:
- Reading temperature (millidegree Celsius)
- Setting high/low thresholds for interrupts
Signed-off-by: Shuwei Wu <shuwei.wu@mailbox.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Yao Zi <me@ziyao.cc>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Vincent Legoll <legoll@online.fr> # OrangePi-RV2
Tested-by: Gong Shuai <gsh517025@gmail.com>
Link: https://patch.msgid.link/20260427-k1-thermal-v5-2-df39187480ed@mailbox.org
Document the SpacemiT K1 Thermal Sensor, which supports
monitoring temperatures for five zones: soc, package, gpu, cluster0,
and cluster1.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shuwei Wu <shuwei.wu@mailbox.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.or>
Link: https://patch.msgid.link/20260427-k1-thermal-v5-1-df39187480ed@mailbox.org
The checkpatch tool warns against splitting quoted strings across
multiple lines. Join the dev_info message into a single line to
improve the ability to grep for the message in the source.
Signed-off-by: Mayur Kumar <kmayur809@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260511174255.215207-1-kmayur809@gmail.com
Correct a trailing whitespace error on line 101 and remove a
duplicated "which" in the kernel-doc comment for thermal_of_zone_register.
Signed-off-by: Mayur Kumar <kmayur809@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260511161854.193573-1-kmayur809@gmail.com
The existing TSENS temperature read logic polls the valid bit and then
reads the temperature register. When temperature reads are triggered
at very short intervals, this can race with hardware updates and allow
the temperature field to be read while it is still being updated.
In this case, the valid bit may already be asserted even though the
temperature value is transitioning, resulting in an incorrect reading.
Hardware programming guidelines require the temperature value and the
valid bit to be sampled atomically in the same read transaction. A
reading is considered valid only if the valid bit is observed set in
that same sample.
The guidelines further specify that software should attempt the
temperature read up to three times to account for transient update
windows. If none of the attempts yields a valid sample, a stable fallback
value must be returned: if the first and second samples match, the second
value is returned;otherwise, if the second and third samples match, the
third value is returned;if neither pair matches, -EAGAIN is returned.
Update the TSENS sensor read logic to implement atomic sampling along
with the recommended retry-and-compare fallback behavior. This removes
the race window and ensures deterministic temperature values in
accordance with hardware requirements.
Signed-off-by: Priyansh Jain <priyansh.jain@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514113643.1954111-1-priyansh.jain@oss.qualcomm.com
Document the Temperature Sensor (TSENS) on the Qualcomm Hawi SoC.
Signed-off-by: Dipa Ramesh Mantre <dipa.mantre@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512-dtbinding-hawi-v1-1-96149d06cccf@oss.qualcomm.com
Document the Temperature Sensor (TSENS) on the Shikra SoC.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260513-tsens_binding-v1-1-1780c6a6caf2@oss.qualcomm.com
Fix a typo in the struct tsens_irq_data comment.
Replace "uppper" with "upper".
Signed-off-by: Jinseok Kim <always.starving0@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Amit Kucheria <amitk@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260516152324.1863-1-always.starving0@gmail.com
Some SoCs (e.g. T7) expose thermal calibration data through the secure
monitor rather than a directly accessible eFuse register. Add a use_sm
flag to amlogic_thermal_data to select this path, and retrieve the
firmware handle and tsensor_id from the "amlogic,secure-monitor" DT
phandle with one fixed argument.
Also introduce the amlogic,t7-thermal compatible using this new path.
While refactoring, fix a pre-existing bug where
amlogic_thermal_initialize() was called after
devm_thermal_of_zone_register(), causing the thermal framework to
read an uninitialized trim_info on zone registration.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260424-add-thermal-t7-vim4-v5-4-9040ca36afe2@aliel.fr
Add SM_THERMAL_CALIB_READ at SMC ID 0x82000047 in the command
table and implement meson_sm_get_thermal_calib(), which forwards the
tsensor_id argument to the secure monitor and returns the calibration data.
Also realign the CMD() column to improve readability.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
[ dlezcano: Fixed kernel-doc format warning ]
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260424-add-thermal-t7-vim4-v5-3-9040ca36afe2@aliel.fr
Add SM_THERMAL_CALIB_READ to the secure monitor command enum and
introduce meson_sm_get_thermal_calib() to allow drivers to retrieve
thermal sensor calibration data through the firmware interface.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260424-add-thermal-t7-vim4-v5-2-9040ca36afe2@aliel.fr
Add the amlogic,t7-thermal compatible for the Amlogic T7 thermal sensor.
Unlike existing variants which use a phandle to the ao-secure syscon,
the T7 relies on a secure monitor interface described by a phandle and
a sensor index argument.
The T7 integrates multiple thermal sensors, all accessed through the
same SMC call. The sensor index argument is required to identify which
sensor's calibration data the secure monitor should return, as a single
SM_THERMAL_CALIB_READ command serves all of them.
Introduce the amlogic,secure-monitor property as a phandle-array and
make amlogic,ao-secure or amlogic,secure-monitor conditionally required
depending on the compatible.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260424-add-thermal-t7-vim4-v5-1-9040ca36afe2@aliel.fr
Use devm_add_action_or_reset() which does the replaced code. It
results in a simpler and more concise code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260429161430.3802970-2-daniel.lezcano@oss.qualcomm.com
Use devm_thermal_of_cooling_device_register() to simplify resource
management and avoid manual cleanup in error paths.
As a side effect this change has the benefit of solving an existing
issue. Before, the function tegra_soctherm_remove() only called
debugfs_remove_recursive() and never called thermal_cooling_device_unregister()
for any of the cooling devices registered here.
After the driver removal, the thermal framework's cdev list would
still hold references to thermal_cooling_device objects whose devdata
pointer (ts) pointed to memory already freed by the platform device's
devm cleanup.
With this change, the cooling device is unregistered when the driver
is removed, thus fixing the issue above.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260424160019.41710-2-daniel.lezcano@oss.qualcomm.com
Replace the manual error handling paths disabling the clocks with
devm_add_action_or_reset(). This ensures the clocks are properly
disabled on probe failure and driver removal, while simplifying the
code by removing the explicit error paths.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260424160019.41710-1-daniel.lezcano@oss.qualcomm.com
Adjust white space in thermal_trip_of_attr().
Signed-off-by: Mayur Kumar <kmayur809@gmail.com>
[ rjw: Added changelog, added tabs before backslash ]
Link: https://patch.msgid.link/20260511175246.217788-1-kmayur809@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
This workqueue has no benefits being per-CPU, so make it unbound adding
WQ_UNBOUND, removing also the WQ_POWER_EFFICIENT flag.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20260515084920.70544-1-marco.crivellari@suse.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit
13f4e660a1 ("thermal/core: Split __thermal_cooling_device_register()
into two functions")
thermal_cooling_device_setup_sysfs() is called before the
->get_max_state() callback in thermal_cooling_device_add().
However, cooling_device_stats_setup() allocates space based on
cdev->max_state, which is not initialized at that point.
With CONFIG_THERMAL_STATISTICS=y, an out of bounds access happens
inside thermal_cooling_device_stats_update(), followed by a kernel
crash:
Unable to handle kernel paging request at virtual address ffff800081329e60
Call trace:
queued_spin_lock_slowpath+0x1cc/0x320 (P)
thermal_cooling_device_stats_update+0x28/0xa4
__thermal_cdev_update+0x74/0x88
thermal_cdev_update+0x44/0x58
step_wise_manage+0x1b8/0x300
__thermal_zone_device_update+0x270/0x414
thermal_zone_device_check+0x28/0x40
process_one_work+0x150/0x290
worker_thread+0x18c/0x300
kthread+0x114/0x120
ret_from_fork+0x10/0x20
To fix this, restore the original ordering of ->get_max_state() and
thermal_cooling_device_setup_sysfs(). Note that with this reordering,
the dev_set_name() and ->get_max_state() error paths now reach
thermal_cdev_release() without setup_sysfs() having run. This is safe
because cdev->stats is NULL in that case and destroy_sysfs() is a no-op.
Fixes: 13f4e660a1 ("thermal/core: Split __thermal_cooling_device_register() into two functions")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Link: https://patch.msgid.link/20260520165835.90974-1-ovidiu.panait.rb@renesas.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In preparation for the upcoming changes separating OF and non-OF code,
split __thermal_cooling_device_register() into allocation and addition
phases.
This allows moving the device node assignment out of the core
initialization path.
This change is not a trivial split. The lifetime of the cooling device
is managed by the device core through put_device(), which triggers
thermal_release() to free all associated resources.
With the introduction of thermal_cooling_device_alloc(), the allocation
path must mirror what thermal_release() undoes. In contrast,
thermal_cooling_device_add() must not perform any rollback and relies
on put_device() for cleanup on error paths. This avoids both double
free and resource leaks.
As part of this rework, add the missing device_initialize() call when
allocating the cooling device.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Replace device_register() with device_add() ]
[ rjw: Rebase on top of previously applied material ]
Link: https://patch.msgid.link/20260505144447.2853933-1-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of passing NULL as the last argument to __hwmon_device_register()
in hwmon_device_register_for_thermal() and then adding each temperature
sysfs attribute to the hwmon device via device_create_file(), redefine
hwmon_device_register_for_thermal() to take an extra_groups argument
that will be passed to __hwmon_device_register(), define an attribute
group with a proper .is_visible() callback for the temperature
attributes and a related attribute groups pointer, and pass the latter
to hwmon_device_register_for_thermal().
This causes the code to be way more straightforward and closer to
what the other users of the hwmon subsystem do.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8704209.T7Z3S40VBb@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current code creates one hwmon device per thermal zone type and that
device is registered under the first thermal zone of the given type.
That turns out to be problematic when the thermal zone holding the
hwmon device is removed.
For example, say that there are two ACPI thermal zones on a system
/sys/devices/virtual/thermal/thermal_zone0/
/sys/devices/virtual/thermal/thermal_zone1/
The current code registers a hwmon class device for thermal_zone0 only:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/
because the type is "acpitz" for both of them, but it adds a sysfs
attribute that belongs to thermal_zone1 under it:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input
There is also
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input
which belongs to thermal_zone0.
When thermal_zone0 is removed, say because the ACPI thermal driver is
unbound from the underlying platform device, the removal code skips the
removal of hwmon0 because of the temp2_input attribute belonging to
thermal_zone1 which effectively prevents thermal_zone0 removal from
making progress.
To address this problem, rework the thermal hwmon code to register one
hwmon device for each thermal zone, but since user space utilities
produce confusing output in some cases when there are multiple hwmon
devices with the same name attribute value present under thermal zones
of the same type, append the thermal zone ID preceded by an underline
character to the name of the hwmon device registered for that thermal
zone.
Link: https://lore.kernel.org/linux-pm/20260402021828.16556-1-liujia6264@gmail.com/
Fixes: f6b6b52ef7 ("thermal_hwmon: Pass the originating device down to hwmon_device_register_with_info")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3070412.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the return value of thermal_zone_crit_temp_valid() depends on
the behavior of the thermal zone .get_crit_temp() callback which
may change over time in theory, thermal_remove_hwmon_sysfs() may
attempt to remove a critical temperature attribute that has not
been created, passing a pointer to an uninitialized attribute
structure to device_remove_file().
To avoid that, set a flag in struct thermal_hwmon_temp after creating
a critical temperature attribute and use the value of that flag to
decide whether or not the attribute needs to be removed.
Fixes: e8db5d6736 ("thermal: hwmon: Make the check for critical temp valid consistent")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2437056.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal class is now dynamically allocated and stored as a
pointer.
Use the thermal_class pointer itself to check whether the thermal
class has been created instead of keeping a separate
thermal_class_unavailable flag.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260508180511.1306659-5-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use class_create() instead of a statically allocated struct class.
This allows the thermal class to be managed through a dynamically
allocated class object and avoids keeping a static class instance
around.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Added __ro_after_init to thermal_class ]
[ rjw: Used temporary local var to store class_create() return value ]
Link: https://patch.msgid.link/20260508180511.1306659-4-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal class release callback currently handles thermal zone
cleanup by checking the device name prefix.
Move the thermal zone cleanup to a dedicated struct device release
callback. This avoids relying on device names to select the release
path and keeps the thermal zone lifetime handling local to the thermal
zone object.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260508180511.1306659-3-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal class release callback currently handles both thermal
zones and cooling devices by checking the device name prefix.
Move the cooling device cleanup to a dedicated struct device release
callback. This avoids relying on device names to select the release
path and keeps the cooling device lifetime handling local to the
cooling device object.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260508180511.1306659-2-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Thermal governors are only unregistered in the thermal_init() error
path and they actually are only deleted from thermal_governor_list.
Put the entire code needed to do that to thermal_unregister_governors()
and rearrange thermal_init() to call that function also when
thermal_register_governors() returns an error.
This allows thermal_unregister_governor() to be dropped
and thermal_register_governor() that is only called by
thermal_register_governors() can be made static __init, so the
headers of these two functions can be dropped from thermal_core.h.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9615355.CDJkKcVGEf@rafael.j.wysocki
Since thermal_register_governor() is only called by
thermal_register_governors() which runs before clearing
thermal_class_unavailable, thermal_tz_list is guaranteed to be
empty when it runs, so the code walking that list in it is
effectively dead.
The same observation applies to the code walking thermal_tz_list
in thermal_unregister_governor() which is also called only if
thermal_class_unavailable hasn't been cleared.
Remove the dead code from both functions mentioned above and rearrange
thermal_register_governor() to reduce indentation level.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3950489.kQq0lBPeGt@rafael.j.wysocki
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
-----BEGIN PGP SIGNATURE-----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=yAV8
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260426172505.1947915-1-graypanda.inzag@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23cea ("xsk: Fix possible segfault at xskmap entry insertion")
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/e4d7b53d4963ef520541a782f5fc8108a168877c.1778176504.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix a regression in overlayfs caused by an fsverity API change
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaf97zhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK+PtAQDzevIJ21gYwhimSRxpbB/eDRQO3gD2
wz4bz2lXZiCjIwEA8rktrlFgrLeqo1W252YXGpvlczf5qgupos3t4Hm8LAk=
=WsMl
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Fix a regression in overlayfs caused by an fsverity API change"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
ovl: fix verity lazy-load guard broken by fsverity_active() semantic change
Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7ksA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3cACgjbF86RGquBMOmCvW0y05gLGXACsAoM4cOfQd
Wel+rDTKUoa6FvreddHi
=vHTv
-----END PGP SIGNATURE-----
Merge tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues"
* tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
staging: vme_user: fix root device leak on init failure
Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7mNg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylbXACfWg3KnXzN+gCG8PM/zVLtinrAhDgAoLzKi1xv
OqVhzuOICtZiP8WBoBoC
=SeVl
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit Cinterion LE910Cx compositions
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usb: dwc3: Move GUID programming after PHY initialization
usb: typec: tcpm: fix debug accessory mode detection for sink ports
usb: typec: tcpm: reset internal port states on soft reset AMS
usb: ulpi: fix memory leak on ulpi_register() error paths
USB: omap_udc: DMA: Don't enable burst 4 mode
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
-----BEGIN PGP SIGNATURE-----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=rlX+
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
* tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: reject oversized block transfers in the common path
MAINTAINERS: Update mail for Peter Rosin
i2c: stub: Reject I2C block transfers with invalid length
i2c: Compare the return value of gpiod_get_direction against GPIO_LINE_DIRECTION_OUT
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
i2c: acpi: Add ELAN0678 to i2c_acpi_force_100khz_device_ids
dt-bindings: i2c: apple,i2c: Add t8122 compatible
i2c: stm32f7: reinit_completion() per transfer not per msg
dt-bindings: i2c: amlogic: Add compatible for T7 SOC
i2c: testunit: Replace system_long_wq with system_dfl_long_wq
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to:
Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP), Geert
Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar Chaurasiya (IBM),
Nathan Chancellor, Ritesh Harjani (IBM), Shivani Nittor, Sourabh Jain, Thomas
Zimmermann, Venkat Rao Bagalkote
-----BEGIN PGP SIGNATURE-----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=ZRl8
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP),
Geert Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar
Chaurasiya (IBM), Nathan Chancellor, Ritesh Harjani (IBM), Shivani
Nittor, Sourabh Jain, Thomas Zimmermann, and Venkat Rao Bagalkote.
* tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
powerpc/pasemi: Drop redundant res assignment
powerpc/ps3: Drop redundant result assignment
powerpc/vdso: Drop -DCC_USING_PATCHABLE_FUNCTION_ENTRY from 32-bit flags with clang
arch/powerpc: Drop CONFIG_FIRMWARE_EDID from defconfig files
powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
powerpc/8xx: Fix interrupt mask in cpm1_gpiochip_add16()
powerpc/vmx: avoid KASAN instrumentation in enter_vmx_ops() for kexec
powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o
pseries/papr-hvpipe: Fix style and checkpatch issues in enable_hvpipe_IRQ()
pseries/papr-hvpipe: Refactor and simplify hvpipe_rtas_recv_msg()
pseries/papr-hvpipe: Kill task_struct pointer from struct hvpipe_source_info
pseries/papr-hvpipe: Simplify spin unlock usage in papr_hvpipe_handle_release()
pseries/papr-hvpipe: Fix the usage of copy_to_user()
pseries/papr-hvpipe: Fix & simplify error handling in papr_hvpipe_init()
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
pseries/papr-hvpipe: Fix race with interrupt handler
powerpc/pseries/htmdump: Add memory configuration dump support to htmdump module
powerpc/pseries/htmdump: Fix the offset value used in htm status dump
powerpc/pseries/htmdump: Fix the offset value used in processor configuration dump
...
