The unaligned access emulation code in Linux has various deficiencies.
For example, it doesn't emulate vector instructions [1] [2], and doesn't
emulate KVM guest accesses. Therefore, requesting misaligned exception
delegation with SBI FWFT actually regresses vector instructions' and KVM
guests' behavior.
Until Linux can handle it properly, guard these sbi_fwft_set() calls
behind RISCV_SBI_FWFT_DELEGATE_MISALIGNED, which in turn depends on
NONPORTABLE. Those who are sure that this wouldn't be a problem can
enable this option, perhaps getting better performance.
The rest of the existing code proceeds as before, except as if
SBI_FWFT_MISALIGNED_EXC_DELEG is not available, to handle any remaining
address misaligned exceptions on a best-effort basis. The KVM SBI FWFT
implementation is also not touched, but it is disabled if the firmware
emulates unaligned accesses.
Cc: stable@vger.kernel.org
Fixes: cf5a8abc65 ("riscv: misaligned: request misaligned exception from SBI")
Reported-by: Songsong Zhang <U2FsdGVkX1@gmail.com> # KVM
Link: https://lore.kernel.org/linux-riscv/38ce44c1-08cf-4e3f-8ade-20da224f529c@iscas.ac.cn/ [1]
Link: https://lore.kernel.org/linux-riscv/b3cfcdac-0337-4db0-a611-258f2868855f@iscas.ac.cn/ [2]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260401-riscv-misaligned-dont-delegate-v2-1-5014a288c097@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
'make htmldocs' complains about ``prctrl` -- so add a second '`' to
avoid the warning.
Documentation/arch/riscv/zicfilp.rst:79: WARNING: Inline literal start-string without end-string. [docutils]
Fixes: 08ee155905 ("prctl: cfi: change the branch landing pad prctl()s to be more descriptive")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260406232304.1892528-1-rdunlap@infradead.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
A fuzzing run reproduced an unkillable io_uring task stuck at ~100% CPU:
[root@fedora io_uring_stress]# ps -ef | grep io_uring
root 1240 1 99 13:36 ? 00:01:35 [io_uring_stress] <defunct>
The task loops inside io_cqring_wait() and never returns to userspace,
and SIGKILL has no effect.
This is caused by the CQ ring exposing rings->cq.head to userspace as
writable, while the authoritative tail lives in kernel-private
ctx->cached_cq_tail. io_cqe_cache_refill() computes free space as an
unsigned subtraction:
free = ctx->cq_entries - min(tail - head, ctx->cq_entries);
If userspace keeps head within [0, tail], the subtraction is well
defined and min() just acts as a defensive clamp. But if userspace
advances head past tail, (tail - head) wraps to a huge value, free
becomes 0, and io_cqe_cache_refill() fails. The CQE is pushed onto the
overflow list and IO_CHECK_CQ_OVERFLOW_BIT is set.
The wait loop in io_cqring_wait() relies on an invariant: refill() only
fails when the CQ is *physically* full, in which case rings->cq.tail has
been advanced to iowq->cq_tail and io_should_wake() returns true. The
tampered head breaks this: refill() fails while the ring is not full, no
OCQE is copied in, rings->cq.tail never catches up, io_should_wake()
stays false, and io_cqring_wait_schedule() keeps returning early because
IO_CHECK_CQ_OVERFLOW_BIT is still set. The result is a tight retry loop
that never returns to userspace.
Introduce io_cqring_queued() as the single point that converts the
(tail, head) pair into a trustworthy queued count. Since the real
head/tail distance is bounded by cq_entries (far below 2^31), a signed
comparison reliably detects userspace moving head past tail; in that
case treat the queue as empty so callers see the full cache as free and
forward progress is preserved.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Link: https://patch.msgid.link/20260514021847.4062782-1-wozizhi@huaweicloud.com
[axboe: fixup commit message, kill 'queued' var, and keep it all in
io_uring.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jinliang Zheng says:
====================
macsec: use rcu_work to fix crypto cleanup in softirq context
From: Jinliang Zheng <alexjlzheng@tencent.com>
crypto_free_aead() can internally call vunmap() (e.g. via dma_free_attrs()
in hardware crypto drivers like hisi_sec2), which must not be invoked from
softirq context. Both free_rxsa() and free_txsa() are RCU callbacks that
run in softirq, causing a kernel crash on affected hardware.
This series fixes the issue by deferring the actual cleanup to a workqueue
using rcu_work, which combines the RCU grace period and workqueue dispatch
into a single primitive.
Two design decisions worth noting:
1. rcu_work instead of schedule_work() + synchronize_rcu()
An alternative would be to call schedule_work() directly from
macsec_rxsa_put()/macsec_txsa_put(), then call synchronize_rcu() at
the start of the work handler to replace the grace period previously
provided by call_rcu(). However, synchronize_rcu() blocks the worker
thread for the duration of a full RCU grace period. Under high SA
churn (e.g. tearing down an interface with many SAs), each SA would
occupy a worker thread while waiting, and multiple concurrent calls
cannot share the same grace period — leading to unnecessary latency
and resource waste.
rcu_work uses call_rcu_hurry() internally, which is fully asynchronous:
the worker thread is only dispatched after the grace period has elapsed,
and multiple concurrent queue_rcu_work() calls naturally batch under the
same grace period via the RCU subsystem's existing coalescing mechanism.
2. Dedicated workqueue instead of system_wq
Using a dedicated workqueue (macsec_wq) allows macsec_exit() to drain
exactly the work items belonging to this module — by calling
destroy_workqueue() after rcu_barrier(). If system_wq were used,
flush_scheduled_work() would drain all pending work items across the
entire system, creating unnecessary coupling with unrelated subsystems
and potentially causing unexpected delays. The dedicated workqueue
provides a clean, contained teardown path.
====================
Link: https://patch.msgid.link/20260511153102.2640368-1-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
free_txsa() is an RCU callback running in softirq context, but calls
crypto_free_aead() which can invoke vunmap() internally on hardware
crypto drivers (e.g. hisi_sec2), triggering a kernel crash.
Use rcu_work to defer the cleanup to a workqueue, for the same reasons
as the analogous fix to free_rxsa() in the previous patch.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-4-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
crypto_free_aead() can internally invoke vunmap() (e.g. via
dma_free_attrs() in hardware crypto drivers such as hisi_sec2).
vunmap() must not be called from softirq context, but free_rxsa()
is an RCU callback that runs in softirq, leading to a kernel crash:
vunmap+0x4c/0x70
__iommu_dma_free+0xd0/0x138
dma_free_attrs+0xf4/0x100
sec_aead_exit+0x64/0xb8 [hisi_sec2]
crypto_destroy_tfm+0x98/0x110
free_rxsa+0x28/0x50 [macsec]
rcu_do_batch+0x184/0x460
rcu_core+0xf4/0x1f8
handle_softirqs+0x118/0x330
Use rcu_work to defer the cleanup to a workqueue. rcu_work dispatches
the worker asynchronously after the RCU grace period, so no thread
blocks waiting, and concurrent releases of multiple SAs naturally
share the same grace period.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-3-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a dedicated ordered workqueue, macsec_wq, which will be used
by subsequent patches to defer SA crypto cleanup (crypto_free_aead and
related teardown) out of softirq context.
Using a dedicated workqueue instead of system_wq allows macsec_exit()
to drain exactly the work items belonging to this module via
destroy_workqueue(), without interfering with unrelated work items on
system_wq or causing unexpected delays elsewhere.
rcu_barrier() in macsec_exit() ensures all in-flight rcu_work callbacks
have enqueued their work items before destroy_workqueue() drains and
destroys the queue, making the two-step teardown correct and complete.
The same sequence is kept in the error path of macsec_init() as a
precaution, to mirror macsec_exit() and stay safe if work ever becomes
queueable before this point in the future.
While at it, rename the error labels in macsec_init() from the
resource-named style (rtnl:, notifier:, wq:) to the err_xxx: style
(err_rtnl:, err_notifier:, err_destroy_wq:) to align with the broader
kernel convention.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-2-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is netdev_lock_ops() before the NETDEV_REGISTER notifier
in register_netdevice(), so use the non-locking functions
in net_failover_slave_register().
failover_slave_register() in failover_existing_slave_register() adds lock
and unlock ops too.
Call Trace:
<TASK>
__schedule+0x30d/0x7a0
schedule+0x27/0x90
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x538/0x9e0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_set_mtu+0x40/0xe0
net_failover_slave_register+0x24/0x280
failover_slave_register+0x103/0x1b0
failover_event+0x15e/0x210
? dropmon_net_event+0xac/0xe0
notifier_call_chain+0x5e/0xe0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x52/0xa0
register_netdevice+0x5f4/0x7c0
register_netdev+0x1e/0x40
_mlx5e_probe+0xe2/0x370 [mlx5_core]
mlx5e_probe+0x59/0x70 [mlx5_core]
? __pfx_mlx5e_probe+0x10/0x10 [mlx5_core]
Fixes: 4c975fd700 ("net: hold instance lock during NETDEV_REGISTER/UP")
Signed-off-by: Faicker Mo <faicker.mo@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Igor Russkikh and Egor Pomozov have left Marvell.
Take over maintenance of the atlantic driver and its PTP subsystem.
Signed-off-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow the ARM64 GCS (Guarded Control Stack) implementation approach
by reducing the shadow stack size allocation from min(RLIMIT_STACK, 4GB)
to min(RLIMIT_STACK/2, 2GB). See commit 506496bcbb ("arm64/gcs: Ensure
that new threads have a GCS")
Rationale:
1. Shadow stacks only store return addresses (8 bytes per entry), not
local variables, function parameters, or saved registers. A 2GB
shadow stack is far more than sufficient for any practical
application, even with extremely deep recursion. Using half the size
maintains adequate margin while being more resource-efficient.
2. On memory-constrained systems (e.g., platforms with only 4GB of
physical memory, which is a common configuration), allocating 4GB
of virtual address space for shadow stack per process/thread can
lead to virtual memory allocation failures when the overcommit mode
is set to OVERCOMMIT_GUESS or OVERCOMMIT_NEVER:
Error: "__vm_enough_memory: not enough memory for the allocation"
This reduces virtual address space consumption by 50% while maintaining
more than adequate space for return address storage.
Signed-off-by: Zong Li <zong.li@sifive.com>
Link: https://patch.msgid.link/20260428024105.645162-1-zong.li@sifive.com
[pjw@kernel.org: clean up patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Since CBS was not calling reset for its child qdisc, there are scenarios
where it could cause an underflow on its parent's qlen/backlog. When the
parent is QFQ, a null-ptr deref could occur.
Add a test case that reproduces the underflow followed by a null-ptr
deref scenario.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During a reset, CBS is not calling reset on its child qdisc, which
might cause qlen/backlog accounting issues. For example, if we have CBS
with a QFQ parent and a netem child with delay, we can create a scenario
where the parent's qlen underflows. QFQ, specifically, uses qlen to
check whether it should deference a pointer, so this scenario may cause
a null-ptr deref in QFQ:
[ 43.875639][ T319] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 43.876124][ T319] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 43.876417][ T319] CPU: 10 UID: 0 PID: 319 Comm: ping Not tainted 7.0.0-13039-ge728258debd5 #773 PREEMPT(full)
[ 43.876751][ T319] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 43.876949][ T319] RIP: 0010:qfq_dequeue+0x35c/0x1650
[ 43.877123][ T319] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
[ 43.877648][ T319] RSP: 0018:ffff8881017ef4f0 EFLAGS: 00010216
[ 43.877845][ T319] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 43.878073][ T319] RDX: 0000000000000009 RSI: 0000000c40000000 RDI: ffff88810eef02b0
[ 43.878306][ T319] RBP: ffff88810eef0000 R08: ffff88810eef0280 R09: 1ffff1102120fd63
[ 43.878523][ T319] R10: 1ffff1102120fd66 R11: 1ffff1102120fd67 R12: 0000000c40000000
[ 43.878742][ T319] R13: ffff88810eef02b8 R14: 0000000000000048 R15: 0000000020000000
[ 43.878959][ T319] FS: 00007f9c51c47c40(0000) GS:ffff88817a0be000(0000) knlGS:0000000000000000
[ 43.879214][ T319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 43.879403][ T319] CR2: 000055e69a2230a8 CR3: 000000010c07a000 CR4: 0000000000750ef0
[ 43.879621][ T319] PKRU: 55555554
[ 43.879735][ T319] Call Trace:
[ 43.879844][ T319] <TASK>
[ 43.879924][ T319] __qdisc_run+0x169/0x1900
[ 43.880075][ T319] ? dev_qdisc_enqueue+0x8b/0x210
[ 43.880222][ T319] __dev_queue_xmit+0x2346/0x37a0
[ 43.880376][ T319] ? register_lock_class+0x3f/0x800
[ 43.880531][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.880684][ T319] ? __pfx___dev_queue_xmit+0x10/0x10
[ 43.880834][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.880977][ T319] ? __lock_acquire+0x819/0x1df0
[ 43.881124][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881275][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881418][ T319] ? __asan_memcpy+0x3c/0x60
[ 43.881563][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881708][ T319] ? eth_header+0x165/0x1a0
[ 43.881853][ T319] ? lockdep_hardirqs_on_prepare+0xdb/0x1a0
[ 43.882031][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.882174][ T319] ? neigh_resolve_output+0x3cc/0x7e0
[ 43.882325][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.882471][ T319] ip_finish_output2+0x6b6/0x1e10
Fix this by calling qdisc_reset for CBS' child qdisc.
Sashiko caught an issue which could result in a null ptr deref if
qdisc_create_dflt() is invoked on an unitialised cbs qdisc which is exposed
by this patch. We add an early return if the qdisc is null to address this.
This is a similar approach used by two other fixes[1][2].
The proper fix for this specific issue elucidated by sashiko is to remove
the call to qdisc_reset when qdisc_create_dflt fails. Since the dflt qdisc
isn't attached anywhere yet at that point, calling the reset callback doesn't
make much sense (and as stated has been a source of two other bugs).
We plan on submitting this fix in a later patch.
[1] https://lore.kernel.org/netdev/20221018063201.306474-2-shaozhengchao@huawei.com/
[2] https://lore.kernel.org/netdev/20221018063201.306474-4-shaozhengchao@huawei.com/
Fixes: 585d763af0 ("net/sched: Introduce Credit Based Shaper (CBS) qdisc")
Reported-by: Junyoung Jang <graypanda.inzag@gmail.com>
Tested-by: Junyoung Jang <graypanda.inzag@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devm_kasprintf() can fail while building the temporary speaker
component string. If that happens, spk_components is set to NULL, but
the current code can still pass it to strlen() on a later loop iteration
or after the loop when appending the speaker component list to
card->components.
Use NULL to represent the initial "no speaker components" state, and
return -ENOMEM immediately if building spk_components fails.
Fixes: 0f60ecffbf ("ASoC: sdw_utils: generate combined spk components string")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260512-asoc-sdw-utils-spk-components-alloc-v1-1-c9bbd6d2e123@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On x86 32-bit with THP enabled, zap_huge_pmd() is seen to generate a
"WARNING: mm/memory.c:735 at __vm_normal_page+0x6a/0x7d", from the
VM_WARN_ON_ONCE(is_zero_pfn(pfn) || is_huge_zero_pfn(pfn)); followed by
"BUG: Bad rss-counter state"s, then later "BUG: Bad page state"s when
reclaim gets to call shrink_huge_zero_folio_scan().
It's as if the _PAGE_SPECIAL bit never got set in the huge_zero pmd: and
indeed, whereas pte_special() and pte_mkspecial() are subject to a
dedicated CONFIG_ARCH_HAS_PTE_SPECIAL, pmd_special() and pmd_mkspecial()
are subject to CONFIG_ARCH_SUPPORTS_PMD_PFNMAP, which is never enabled on
any 32-bit architecture.
While the problem was exposed through commit d80a9cb1a6
("mm/huge_memory: add and use normal_or_softleaf_folio_pmd()"), it was an
oversight in commit af38538801 ("mm/memory: factor out common code from
vm_normal_page_*()") and would result in other problems:
* huge zero folio accounted in smaps, pagemap (PAGE_IS_FILE) and
numamaps as file-backed THP
* folio_walk_start() returning the folio even without FW_ZEROPAGE set.
Callers seem to tolerate that, though.
... and triggering the VM_WARN_ON_ONE(), although never reported so far.
To fix it, teach vm_normal_page_pmd()/vm_normal_page_pud() to consider
whether pmd_special/pud_special is actually implemented.
Link: https://lore.kernel.org/20260430-pmd_special-v1-1-dbcbcfd72c20@kernel.org
Fixes: af38538801 ("mm/memory: factor out common code from vm_normal_page_*()")
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Reported-by: Hugh Dickins <hughd@google.com>
Closes: https://lore.kernel.org/r/74a75b59-2e13-3985-ee99-d5521f39df2a@google.com
Reported-by: Bibo Mao <maobibo@loongson.cn>
Closes: https://lore.kernel.org/r/20260430041121.2839350-1-maobibo@loongson.cn
Debugged-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block
via find_memory_block_by_id(), which acquires a reference to the memory
block device.
Both helpers use the returned memory block without dropping that
reference, leaking the device reference on each successful lookup. Drop
the reference after updating nr_hwpoison.
Link: https://lore.kernel.org/20260428085219.1316047-3-songmuchun@bytedance.com
Fixes: 5033091de8 ("mm/hwpoison: introduce per-memory_block hwpoison counter")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: Fix memory block leaks and locking", v2.
This series fixes two memory block device reference leaks and one locking
issue around the per-memory_block hwpoison counter.
This patch (of 2):
remove_memory_blocks_and_altmaps() looks up each memory block with
find_memory_block(), which acquires a reference to the memory block
device.
That reference is never dropped on this path, resulting in a leaked device
reference when removing memory blocks and their altmaps. Drop the
reference after retrieving mem->altmap and clearing mem->altmap, before
removing the memory block device.
Link: https://lore.kernel.org/20260428085219.1316047-1-songmuchun@bytedance.com
Link: https://lore.kernel.org/20260428085219.1316047-2-songmuchun@bytedance.com
Fixes: 6b8f0798b8 ("mm/memory_hotplug: split memmap_on_memory requests across memblocks")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Increase buffer size to accommodate machines with 64K PAGE_SIZE.
Link: https://lore.kernel.org/20260421070707.992873-1-lk@c--e.de
Fixes: 0913b75547 ("lib: kunit_iov_iter: add tests for extract_iter_to_sg")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reported-by: David Gow <davidgow@google.com>
Closes: https://lore.kernel.org/34a81ec2-af84-465d-9b5e-7bb5bf01680f@davidgow.net
Tested-by: David Gow <davidgow@google.com>
Tested-by: Josh Law <joshlaw48@gmail.com>
Reviewed-by: Josh Law <joshlaw48@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__GFP_ZEROTAGS semantics are currently a bit weird, but effectively this
flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN.
If we run with init_on_free, we will zero out pages during
__free_pages_prepare(), to skip zeroing on the allocation path.
However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will
consequently not only skip clearing page content, but also skip clearing
tag memory.
Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that
will get mapped to user space through set_pte_at() later: set_pte_at() and
friends will detect that the tags have not been initialized yet
(PG_mte_tagged not set), and initialize them.
However, for the huge zero folio, which will be mapped through a PMD
marked as special, this initialization will not be performed, ending up
exposing whatever tags were still set for the pages.
The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state
that allocation tags are set to 0 when a page is first mapped to user
space. That no longer holds with the huge zero folio when init_on_free is
enabled.
Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to
tag_clear_highpages() whether we want to also clear page content.
Invert the meaning of the tag_clear_highpages() return value to have
clearer semantics.
Reproduced with the huge zero folio by modifying the check_buffer_fill
arm64/mte selftest to use a 2 MiB area, after making sure that pages have
a non-0 tag set when freeing (note that, during boot, we will not actually
initialize tags, but only set KASAN_TAG_KERNEL in the page flags).
$ ./check_buffer_fill
1..20
...
not ok 17 Check initial tags with private mapping, sync error mode and mmap memory
not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory
...
This code needs more cleanups; we'll tackle that next, like
decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN.
[akpm@linux-foundation.org: s/__GPF_ZERO/__GFP_ZERO/, per David]
Link: https://lore.kernel.org/20260421-zerotags-v2-1-05cb1035482e@kernel.org
Fixes: adfb6609c6 ("mm/huge_memory: initialise the tags of the huge zero folio")
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20260428124833.1903302-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Baoquan He <baoquan.he@linux.dev>
Cc: Dave Young <ruirui.yang@linux.dev>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Destructive tests should be invoked with -d command-line option, but this
won't work today since 'd' is missing in getopts command-line. This
commit fixes it.
Link: https://lore.kernel.org/214fd9e4-5398-4c26-859e-c982c2e277c3@redhat.com
Fixes: f16ff3b692 ("selftests/mm: run_vmtests.sh: add missing tests")
Signed-off-by: Luiz Capitulino <luizcap@redhat.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The commit 5ba6bc27b1 ("slab: decouple pointer to barn from
kmem_cache_node") reorganized the struct kmem_cache to factor out the
per-node fields to the new struct kmem_cache_per_node_ptrs. This causes
the gdb scripts for lx-slabinfo and lx-slabtrace fail as they still
reference the old structure.
Adjust the gdb scripts to match the current state of struct kmem_cache.
Link: https://lore.kernel.org/20260427142448.666117-3-illia@yshyn.com
Fixes: 5ba6bc27b1 ("slab: decouple pointer to barn from kmem_cache_node")
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Hao Li <hao.li@linux.dev>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Seongjun Hong <hsj0512@snu.ac.kr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The symbols phys_base, _text, and _end, used in x86_page_ops are either
defined in assembly or implicitly by the linker. Thus, they lack type
information and cause a conversion error after gdb.parse_and_eval.
Explicitly cast these expressions to unsigned long.
Link: https://lore.kernel.org/20260427142448.666117-2-illia@yshyn.com
Fixes: 55f8b4518d ("scripts/gdb: implement x86_page_ops in mm.py")
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: Hao Li <hao.li@linux.dev>
Cc: Harry Yoo <harry@kernel.org>
Cc: Seongjun Hong <hsj0512@snu.ac.kr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The print format is wrongly marking sz_applied as sz_tried. Fix it.
Link: https://lore.kernel.org/20260426193119.88095-1-sj@kernel.org
Fixes: 804c26b961 ("mm/damon/core: add trace point for damos stat per apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org> # 7.0.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop without
calling mem_cgroup_iter_break(). This leaks the cgroup reference. Fix
the issue by calling mem_cgroup_iter_break() before the break.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260426173625.86521-1-sj@kernel.org
Link: https://lore.kernel.org/20260423004148.74722-1-sj@kernel.org [1]
Fixes: 29cbb9a13f ("mm/damon/sysfs-schemes: implement scheme filters")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When check_stable_address_space() fails after the PMD spinlock has
been acquired via pmd_lock(), the code jumps directly to the abort
label, bypassing the spin_unlock() call in unlock_abort. This causes
the PMD spinlock to be permanently held, leading to a deadlock.
Change the goto target from abort to unlock_abort to ensure the
spinlock is always released on this error path.
Link: https://lore.kernel.org/20260425133537.17463-1-nueralspacetech@gmail.com
Fixes: a30b48bf1b ("mm/migrate_device: implement THP migration of zone device pages")
Signed-off-by: Sunny Patel <nueralspacetech@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The reset actions of the DEFZA adapters are exceedingly slow, taking up
to 30 seconds to complete by the device spec and typically in the range
of 10 seconds in reality, as required for the device RTOS to boot, still
quite a lot. Therefore a state machine is used that's interrupt driven,
however a safety mechanism is required in case of adapter malfunction,
so that if no state change interrupt has arrived in time, then the
situation is taken care of.
The safety mechanism depends on the origin of the reset. For regular
adapter initialisation at the device probe time a sleep is requested.
However a reset is also required by the device spec when the adapter has
transitioned into the halted state, such as in response to a PC Trace
event in the course of ring fault recovery, possibly a common network
event. In that case no sleep is possible as a device halt is reported
at the hardirq level.
A timer is therefore set up to ensure progress in case no adapter state
change interrupt has arrived in time, but as from commit 168f6b6ffb
("timers: Use del_timer_sync() even on UP") a warning is issued as the
timer is deleted in the hardirq handler upon an expected state change:
defza: v.1.1.4 Oct 6 2018 Maciej W. Rozycki
tc2: DEC FDDIcontroller 700 or 700-C at 0x18000000, irq 4
tc2: resetting the board...
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.0.0-dirty #2 VOLUNTARY
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 7070617773203a6d
0000000000000000 9800000002027ba4 0000000000001000 6465746e69617420
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff800ab7c0>] do_idle+0x40/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: OK
tc2: model 700 (DEFZA-AA), MMF PMD, address 08-00-2b-xx-xx-xx
tc2: ROM rev. 1.0, firmware rev. 1.2, RMC rev. A, SMT ver. 1
tc2: link unavailable
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W 7.0.0-dirty #2 VOLUNTARY
Tainted: [W]=WARN
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 0000000000000000
0000000000000000 9800000002027ba4 0000000000001000 0000000000000000
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff806de8a4>] arch_local_irq_disable+0x4/0x28
[<ffffffff800ab7d0>] do_idle+0x50/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: registered as fddi0
The immediate origin of the new warning is the switch away from aliasing
del_timer_sync() to del_timer() (timer_delete_sync() to timer_delete()
in terms of current function names) for UP configurations, which however
is the only choice for this driver anyway as no SMP hardware supports
the TURBOchannel bus this device interfaces to. Therefore there is a
very remote issue only this is a sign of.
Specifically if an adapter reset issued upon a transition to the halted
state times out and first triggers fza_reset_timer() for another reset
assertion, which then schedules fza_reset_timer() for reset deassertion
and then that second call is pre-empted after poking at the hardware,
but before the timer has been rearmed and owing to high system load
causing exceedingly high scheduling latency control is not handed back
before a transition to the uninitialised state has caused the timer to
be deleted even before it has been started, then fza_reset_timer() will
be called yet again and issue another reset even though by then the
adapter has already recovered.
Prevent this situation from happening by switching to timer_delete() for
the transition to the halted state and protect the code region affected
with a spinlock, also to make sure add_timer() has not been called twice
in a row due to an execution race between the interrupt handler and the
timer handler (though it could only happen on SMP, but let's keep the
driver clean). It's a very unlikely sequence of events to happen and
therefore there's no point in trying to be overly clever about it, such
as by placing printk() calls outside the protection. For the transition
to the uninitialised state switch to timer_delete_sync_try() instead, so
that a timer isn't deleted that's just been rearmed by the timer handler
and needs to watch for the device to come out of reset again (again, an
SMP scenario only).
Retain timer_delete_sync() invocations outside the hardirq context for a
stray timer not to fire once device structures have been released.
Fixes: 61414f5ec9 ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tegra_i2c_mutex_unlock() returning an error that overwrites the transfer
result causes silent loss of I2C transfer errors. If the transfer failed
but the unlock succeeded, the error was lost and the function incorrectly
reported success.
Rather than propagating the unlock error (which is not actionable by the
caller - the I2C message may have been sent regardless), convert the
function to return void and WARN on the unexpected condition. If the
unlock fails, subsequent lock attempts will fail anyway, making the error
visible on the next transfer.
Fixes: 6077cfd716 ("i2c: tegra: Add support for SW mutex register")
Signed-off-by: Saurav Sachidanand <sauravsc@amazon.com>
Cc: <stable@vger.kernel.org> # v7.0+
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260507221145.62183-3-sauravsc@amazon.com
If tegra_i2c_mutex_lock() fails, the function returns without calling
pm_runtime_put(), leaking the runtime PM reference acquired by the
preceding pm_runtime_get_sync(). This prevents the device from ever
entering runtime suspend.
Add the missing pm_runtime_put() before returning on lock failure.
Fixes: 6077cfd716 ("i2c: tegra: Add support for SW mutex register")
Signed-off-by: Saurav Sachidanand <sauravsc@amazon.com>
Cc: <stable@vger.kernel.org> # v7.0+
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260507221145.62183-2-sauravsc@amazon.com
If we pass a software node to a newly created device using struct
platform_device_info, it will not be removed when the device is
released. This may happen when a module creating the device is removed
or on failure in platform_device_add().
When we try to reuse that software node in a subsequent call to
platform_device_register_full(), it will fail with -EBUSY.
Provide a wrapper around the existing platform_device_release() that
additionally calls device_remove_software_node() and use it to replace
the former if we end up adding a software node.
While at it: check all three possible situations in which two software
nodes for a single platform device can be created/assigned in
platform_device_register_full() and bail-out early.
Fixes: 0fc434bc2c ("driver core: platform: allow attaching software nodes when creating devices")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260513-swnode-remove-on-dev-unreg-v6-1-f9c58939df27@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Bulk is hardening of the new sub-scheduler infrastructure.
- UAFs and lifecycle bugs on the sub-sched attach/detach paths: parent
sub_kset freed under a racing child, list_del_rcu on an uninitialized
list head, ops->priv stomped by concurrent attach/detach, and a UAF in
the init-failure error path.
- Task state-machine reorg closing concurrent enable-vs-dead races: a
task exiting during the unlocked init window could trip NULL ops
derefs or skip exit_task() cleanup.
- A scx_link_sched() self-deadlock on scx_sched_lock.
- isolcpus: stop dereferencing the now-RCU-protected HK_TYPE_DOMAIN
cpumask without RCU, and stop rejecting BPF schedulers when only
cpuset isolated partitions are active.
- PREEMPT_RT: disable irq_work runs in hardirq context so dumps show the
failing task rather than the irq_work kthread.
- Assorted !CONFIG_EXT_SUB_SCHED, randconfig, and selftest build fixes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCagTk1g4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGT6TAP0ZbRHz9ViligecZXIHjEvZQjEV4sn1NLpGi4og
V0Ol2AD/RzqHQZo5+HpMz4hPrcZdkAWcr74cLrNTJ2WQjOk4RgE=
=6Mbx
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"The bulk of this is hardening of the new sub-scheduler infrastructure.
- UAFs and lifecycle bugs on the sub-sched attach/detach paths:
parent sub_kset freed under a racing child, list_del_rcu on an
uninitialized list head, ops->priv stomped by concurrent
attach/detach, and a UAF in the init-failure error path
- Task state-machine reorg closing concurrent enable-vs-dead races: a
task exiting during the unlocked init window could trip NULL ops
derefs or skip exit_task() cleanup
- A scx_link_sched() self-deadlock on scx_sched_lock
- isolcpus: stop dereferencing the now-RCU-protected HK_TYPE_DOMAIN
cpumask without RCU, and stop rejecting BPF schedulers when only
cpuset isolated partitions are active
- PREEMPT_RT: disable irq_work runs in hardirq context so dumps show
the failing task rather than the irq_work kthread
- Assorted !CONFIG_EXT_SUB_SCHED, randconfig, and selftest build
fixes"
* tag 'sched_ext-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use HK_TYPE_DOMAIN_BOOT to detect isolcpus= domain isolation
sched_ext: Defer sub_kset base put to scx_sched_free_rcu_work
sched_ext: INIT_LIST_HEAD() &sch->all in scx_alloc_and_add_sched()
sched_ext: Drop NONE early return in scx_disable_and_exit_task()
sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path
sched_ext: Clear ops->priv on scx_alloc_and_add_sched() error paths
sched_ext: Fix ops->priv clobber on concurrent attach/detach
selftests/sched_ext: Fix build error in dequeue selftest
sched_ext: Handle SCX_TASK_NONE in disable/switched_from paths
sched_ext: Close sub-sched init race with post-init DEAD recheck
sched_ext: Close root-enable vs sched_ext_dead() race with SCX_TASK_INIT_BEGIN
sched_ext: Replace SCX_TASK_OFF_TASKS flag with SCX_TASK_DEAD state
sched_ext: Inline scx_init_task() and move RESET_RUNNABLE_AT into scx_set_task_state()
sched_ext: Cleanups in preparation for the SCX_TASK_INIT_BEGIN/DEAD work
sched_ext: Use IRQ_WORK_INIT_HARD() to initialize sch->disable_irq_work
sched_ext: Fix !CONFIG_EXT_SUB_SCHED build warnings
sched_ext: Drop unused scx_find_sub_sched() stub
sched_ext: Move scx_error() out of scx_link_sched()'s lock region
- cpuset fixes:
- Partition invalidation could return CPUs still in use by sibling
partitions, producing overlapping effective_cpus.
- cpuset_can_attach() over-reserved DL bandwidth on moves that stayed
within the same root domain.
- Pending DL migration state leaked into later attaches when a later
can_attach() check failed.
- Reorder PF_EXITING and __GFP_HARDWALL checks so dying tasks can
allocate from any node and exit quickly.
- dmem: propagate -ENOMEM instead of spinning forever when the fallback
pool allocation also fails.
- selftests/cgroup: percpu test error-path leak, bogus numeric
comparison of cpuset strings, and a zero-length read() that silently
passed OOM-kill tests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCagTkzw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGR+AAQCcYEGJ+yNAzzrTcY8xy7333rorMckSmZt18jzv
1KSqEQD+KjindGNcWP/meQBPnEjcBjix6i961mgnQ99e/UD2HQ4=
=4pT3
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- cpuset fixes:
- Partition invalidation could return CPUs still in use by sibling
partitions, producing overlapping effective_cpus
- cpuset_can_attach() over-reserved DL bandwidth on moves that
stayed within the same root domain
- Pending DL migration state leaked into later attaches when a
later can_attach() check failed
- Reorder PF_EXITING and __GFP_HARDWALL checks so dying tasks can
allocate from any node and exit quickly
- dmem: propagate -ENOMEM instead of spinning forever when the fallback
pool allocation also fails
- selftests/cgroup: percpu test error-path leak, bogus numeric
comparison of cpuset strings, and a zero-length read() that silently
passed OOM-kill tests
* tag 'cgroup-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Return only actually allocated CPUs during partition invalidation
selftests/cgroup: Fix error path leaks in test_percpu_basic
cgroup/cpuset: Reserve DL bandwidth only for root-domain moves
cgroup/cpuset: Reset DL migration state on can_attach() failure
selftests/cgroup: Fix string comparison in write_test
selftests/cgroup: Fix cg_read_strcmp() empty string comparison
cgroup/dmem: Return -ENOMEM on failed pool preallocation
cgroup/cpuset: move PF_EXITING check before __GFP_HARDWALL in cpuset_current_node_allowed()
- Plug a wq->cpu_pwq leak on the WQ_UNBOUND allocation failure path.
- Fix a cancel_delayed_work_sync() livelock against drain_workqueue()
caused by the drain/destroy reject path leaving WORK_STRUCT_PENDING set
with no owner.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCagTkwA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGXGNAQDarHcCjUzjddPY1drGJz73LIsfAhU1haDWYQgD
Ssd/ZgD/fYP0Gp6GwbFF/n9JAo48Y2P29PF4lOfVagv1Md0SeAM=
=NMbR
-----END PGP SIGNATURE-----
Merge tag 'wq-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Plug a wq->cpu_pwq leak on the WQ_UNBOUND allocation failure path
- Fix a cancel_delayed_work_sync() livelock against drain_workqueue()
caused by the drain/destroy reject path leaving WORK_STRUCT_PENDING
set with no owner
* tag 'wq-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix wq->cpu_pwq leak in alloc_and_link_pwqs() WQ_UNBOUND path
workqueue: Release PENDING in __queue_work() drain/destroy reject path
Check the return value of kzalloc() to prevent a NULL pointer
dereference on allocation failure.
Fixes: 06cfbca0e1 ("drm/msm/a6xx: Share dependency vote table with GMU")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/721342/
Message-ID: <20260428073558.1234238-1-nichen@iscas.ac.cn>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
Store the return value in the appropriate type and in case of error,
return it rather than WARNing.
Fixes: ad8f36e4b6 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Patchwork: https://patchwork.freedesktop.org/patch/719685/
Message-ID: <20260421-iommu_map_sgtable-return-v1-3-fb484c07d2a1@nvidia.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Preemption is enabled for gen8 as well.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/719256/
Message-ID: <20260418150847.157246-1-robin.clark@oss.qualcomm.com>
This got lost in the shuffle somehow when moving the vfunc table to
catalogue. Fixes inhibiting IFPC when userspace is collecting perfcntr
data.
Fixes: 491fadb2b8 ("drm/msm/adreno: Move adreno_gpu_func to catalogue")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/717780/
Message-ID: <20260411150312.257937-1-robin.clark@oss.qualcomm.com>
Before a5xx Adreno driver will not try fetching UBWC params (because
those generations didn't support UBWC anyway), however it's still
possible to query UBWC-related params from the userspace, triggering
possible NULL pointer dereference. Check for UBWC config in
adreno_get_param() and return sane defaults if there is none.
Fixes: a452510aad ("drm/msm/adreno: Switch to the common UBWC config struct")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Rob Clark <rob.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/717778/
Message-ID: <20260411-adreno-fix-ubwc-v3-1-4983156f3f80@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result.
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Laratro <research@aradex.io>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a SMB2 client opens a file with a durable v2 handle and then issues
SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the
reconnectable file pointer but leaves the fp registered in global_ft.idr
until the durable scavenger fires (up to fp->durable_timeout seconds
later).
During that window any read of /proc/fs/ksmbd/files (mode 0400) panics
the kernel because proc_show_files() walks global_ft.idr and
unconditionally dereferences fp->tcon->id with no NULL guard.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:proc_show_files+0x118/0x740
Call Trace:
proc_show_files+0x118/0x740
seq_read_iter+0x4ef/0xe10
proc_reg_read_iter+0x1b7/0x280
...
Guard the dereference. A durable-disconnected fp legitimately has no
tcon; report its tree id as 0 rather than oopsing.
Fixes: b38f99c121 ("ksmbd: add procfs interface for runtime monitoring and statistics")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Laratro <research@aradex.io>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 299f962c0b ("ksmbd: use check_add_overflow() to prevent u16
DACL size overflow") added check_add_overflow() guards that break out
of the ACE-building loops in set_posix_acl_entries_dacl() when the
accumulated DACL size would wrap past 65535.
However, each iteration allocates a struct smb_sid via kmalloc_obj()
at the top of the loop and relies on the kfree(sid) call at the end
of the loop body (the 'pass_same_sid' label in the first loop, and
the explicit kfree at the tail of the second loop) to release it.
The newly introduced 'break' statements bypass those kfree() calls,
leaking the sid buffer every time an overflow is detected.
A malicious or malformed file with enough POSIX ACL entries to trip
the overflow check will leak one or more struct smb_sid allocations
on every request that touches the file's DACL, providing a trivial
kernel memory exhaustion vector.
Free sid before breaking out of the loops to plug the leak.
Fixes: 299f962c0b ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow")
Cc: stable@vger.kernel.org
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In a6xx_gpu_init(), node is obtained via of_parse_phandle().
While there was a manual of_node_put() at the end of the
common path, several early error returns would bypass this call,
resulting in a reference leak.
Fix this by using the __free(device_node) cleanup handler to
release the reference when the variable goes out of scope.
Fixes: 5a903a44a9 ("drm/msm/a6xx: Introduce GMU wrapper support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/700661/
Message-ID: <20260124-a6xx_gpu-v1-1-fa0c8b2dcfb1@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Commit dc220915dd ("drm/msm: Fix GMEM_BASE for gen8") changed the
GMEM_BASE check from adreno_is_a650_family() & adreno_is_a740_family()
to family >= ADRENO_6XX_GEN4.
This inadvertently excluded A650 (ADRENO_6XX_GEN3), causing it to report
an incorrect GMEM_BASE which results in severe rendering corruption.
Update check to also include ADRENO_6XX_GEN3 to fix A650.
Fixes: dc220915dd ("drm/msm: Fix GMEM_BASE for gen8")
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/711880/
Message-ID: <20260314-fix-gmem-base-a650-v1-1-3308f60cf74c@pm.me>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
VFIO_PCI_OFFSET_TO_INDEX() is used in several places with a signed
parameter (e.g. loff_t). Because it makes no sense for a BAR/resource
index to be negative, enforce this in the macro.
This fixes at least one current issue, where vfio_pci_ioeventfd() uses
this macro with an unvalidated signed loff_t returned into a signed
type, leading to a possible negative array access. This instance does
test against an out-of-bounds positive value, so treating the index as
unsigned fixes this issue.
Fixes: 89e1f7d4c6 ("vfio: Add PCI device driver")
Signed-off-by: Matt Evans <mattev@meta.com>
Link: https://lore.kernel.org/r/20260511144642.2926799-1-mattev@meta.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
scx_enable() refuses to attach a BPF scheduler when isolcpus=domain is
in effect by comparing housekeeping_cpumask(HK_TYPE_DOMAIN) against
cpu_possible_mask.
Since commit 27c3a5967f ("sched/isolation: Convert housekeeping
cpumasks to rcu pointers"), HK_TYPE_DOMAIN's cpumask is RCU protected
and dereferencing it requires either RCU read lock, the cpu_hotplug
write lock, or the cpuset lock; scx_enable() holds none of these, so
booting with isolcpus=domain and attaching any BPF scheduler triggers
the following lockdep splat:
=============================
WARNING: suspicious RCU usage
-----------------------------
kernel/sched/isolation.c:60 suspicious rcu_dereference_check() usage!
1 lock held by scx_flash/281:
#0: ffffffff8379fce0 (update_mutex){+.+.}-{4:4}, at:
bpf_struct_ops_link_create+0x134/0x1c0
Call Trace:
dump_stack_lvl+0x6f/0xb0
lockdep_rcu_suspicious.cold+0x37/0x70
housekeeping_cpumask+0xcd/0xe0
scx_enable.isra.0+0x17/0x120
bpf_scx_reg+0x5e/0x80
bpf_struct_ops_link_create+0x151/0x1c0
__sys_bpf+0x1e4b/0x33c0
__x64_sys_bpf+0x21/0x30
do_syscall_64+0x117/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In addition, commit 03ff735101 ("cpuset: Update HK_TYPE_DOMAIN cpumask
from cpuset") made HK_TYPE_DOMAIN include cpuset isolated partitions as
well, which means the current check also rejects BPF schedulers when a
cpuset partition is active. That contradicts the original intent of
commit 9f391f94a1 ("sched_ext: Disallow loading BPF scheduler if
isolcpus= domain isolation is in effect"), which explicitly noted that
cpuset partitions are honored through per-task cpumasks and should not
be rejected.
Switch to housekeeping_enabled(HK_TYPE_DOMAIN_BOOT), which reads only
the housekeeping flag bit (no RCU dereference) and reflects exactly the
boot-time isolcpus= configuration that the error message refers to.
Fixes: 27c3a5967f ("sched/isolation: Convert housekeeping cpumasks to rcu pointers")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
vfio_pci_dma_buf_move(revoked=true) and vfio_pci_dma_buf_cleanup()
ran the same drain sequence: set priv->revoked, invalidate mappings,
wait for fences, drop the registered kref, wait for completion.
When the VFIO device fd was closed after PCI_COMMAND_MEMORY had been
cleared, both ran in turn -- the second kref_put underflowed and the
subsequent wait_for_completion() blocked on a completion that the
first run had already consumed:
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x59/0x90
Call Trace:
vfio_pci_dma_buf_cleanup+0x163/0x168 [vfio_pci_core]
vfio_pci_core_close_device+0x67/0xe0 [vfio_pci_core]
vfio_df_close+0x4c/0x80 [vfio]
vfio_df_group_close+0x36/0x80 [vfio]
vfio_device_fops_release+0x21/0x40 [vfio]
__fput+0xe6/0x2b0
__x64_sys_close+0x3d/0x80
Collapse the duplication: vfio_pci_dma_buf_cleanup() now delegates
the drain to vfio_pci_dma_buf_move(true), which is idempotent for
already-revoked dma-bufs. cleanup retains only list removal and
the device registration drop; the dma_resv_lock that bracketed
those is dropped along with the in-line drain that required it,
memory_lock continues to protect them.
Re-arm the kref and the completion at the end of move()'s revoke
branch so post-revoke state matches post-creation (kref == 1,
completion ready). This keeps cleanup's call into move() a no-op
when revoke already ran, and replaces the explicit kref_init() that
the un-revoke branch used to perform for the un-revoke -> remap
path.
Fixes: 1a8a5227f2 ("vfio: Wait for dma-buf invalidation to complete")
Reported-by: Joonas Kylmälä <joonas.kylmala@netum.fi>
Closes: https://lore.kernel.org/all/GVXPR02MB12019AA6014F27EF5D773E89BFB372@GVXPR02MB12019.eurprd02.prod.outlook.com/
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260507143548.1018405-1-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Just like for the extract user pages path, we need to align down the
size to the supported boundary.
Fixes: 8dd5e7c75d ("block: add helpers to bounce buffer an iov_iter into bios")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260507050153.1298375-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
