mirror of
https://github.com/torvalds/linux.git
synced 2026-08-01 20:22:08 +02:00
28af22c6c8
984284 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jesper Dangaard Brouer
|
28af22c6c8 |
net: adjust net_device layout for cacheline usage
The current layout of net_device is not optimal for cacheline usage. The member adj_list.lower linked list is split between cacheline 2 and 3. The ifindex is placed together with stats (struct net_device_stats), although most modern drivers don't update this stats member. The members netdev_ops, mtu and hard_header_len are placed on three different cachelines. These members are accessed for XDP redirect into devmap, which were noticeably with perf tool. When not using the map redirect variant (like TC-BPF does), then ifindex is also used, which is placed on a separate fourth cacheline. These members are also accessed during forwarding with regular network stack. The members priv_flags and flags are on fast-path for network stack transmit path in __dev_queue_xmit (currently located together with mtu cacheline). This patch creates a read mostly cacheline, with the purpose of keeping the above mentioned members on the same cacheline. Some netdev_features_t members also becomes part of this cacheline, which is on purpose, as function netif_skb_features() is on fast-path via validate_xmit_skb(). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/161168277983.410784.12401225493601624417.stgit@firesoul Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexey Denisov
|
462512824f |
lan743x: fix endianness when accessing descriptors
TX/RX descriptor ring fields are always little-endian, but conversion wasn't performed for big-endian CPUs, so the driver failed to work. This patch makes the driver work on big-endian CPUs. It was tested and confirmed to work on NXP P1010 processor (PowerPC). Signed-off-by: Alexey Denisov <rtgbnm@gmail.com> Link: https://lore.kernel.org/r/20210128044859.280219-1-rtgbnm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Christophe JAILLET
|
4140ff1ba0 |
e100: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'e100_alloc()', GFP_KERNEL can be used because it is only called from the probe function and no lock is acquired. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Link: https://lore.kernel.org/r/20210128210736.749724-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Subash Abhinov Kasiviswanathan
|
59e139cf0b |
net: qmi_wwan: Add pass through mode
Pass through mode is to allow packets in MAP format to be passed on to the stack. rmnet driver can be used to process and demultiplex these packets. Pass through mode can be enabled when the device is in raw ip mode only. Conversely, raw ip mode cannot be disabled when pass through mode is enabled. Userspace can use pass through mode in conjunction with rmnet driver through the following steps- 1. Enable raw ip mode on qmi_wwan device 2. Enable pass through mode on qmi_wwan device 3. Create a rmnet device with qmi_wwan device as real device using netlink Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/1611560015-20034-1-git-send-email-subashab@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
bbe25b7d69 |
Merge branch 'net-usb-qmi_wwan-new-mux_id-sysfs-file'
Daniele Palmas says: ==================== net: usb: qmi_wwan: new mux_id sysfs file this patch series add a sysfs file to let userspace know which mux id has been used to create a qmimux network interface. I'm aware that adding new sysfs files is not usually the right path, but my understanding is that this piece of information can't be retrieved in any other way and its absence restricts how userspace application (e.g. like libqmi) can take advantage of the qmimux implementation in qmi_wwan. ==================== Link: https://lore.kernel.org/r/20210127153433.12237-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Daniele Palmas
|
b4b91e2409 |
net: qmi_wwan: document qmap/mux_id sysfs file
Document qmap/mux_id sysfs file showing qmimux interface id Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Daniele Palmas
|
e594ad980e |
net: usb: qmi_wwan: add qmap id sysfs file for qmimux interfaces
Add qmimux interface sysfs file qmap/mux_id to show qmap id set during the interface creation, in order to provide a method for userspace to associate QMI control channels to network interfaces. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Acked-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Tom Rix
|
d7a177ea8f |
ipvlan: remove h from printk format specifier
This change fixes the checkpatch warning described in this commit
commit
|
||
|
Jakub Kicinski
|
c358f95205 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/can/dev.c |
||
|
Jakub Kicinski
|
24a790da0a |
mlx5 subfunction support
Parav Pandit Says:
=================
This patchset introduces support for mlx5 subfunction (SF).
A subfunction is a lightweight function that has a parent PCI function on
which it is deployed. mlx5 subfunction has its own function capabilities
and its own resources. This means a subfunction has its own dedicated
queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from
the parent PCI function.
When subfunction is RDMA capable, it has its own QP1, GID table and rdma
resources neither shared nor stolen from the parent PCI function.
A subfunction has dedicated window in PCI BAR space that is not shared
with the other subfunctions or parent PCI function. This ensures that all
class devices of the subfunction accesses only assigned PCI BAR space.
A Subfunction supports eswitch representation through which it supports tc
offloads. User must configure eswitch to send/receive packets from/to
subfunction port.
Subfunctions share PCI level resources such as PCI MSI-X IRQs with
their other subfunctions and/or with its parent PCI function.
Patch summary:
--------------
Patch 1 to 4 prepares devlink
patch 5 to 7 mlx5 adds SF device support
Patch 8 to 11 mlx5 adds SF devlink port support
Patch 12 and 14 adds documentation
Patch-1 prepares code to handle multiple port function attributes
Patch-2 introduces devlink pcisf port flavour similar to pcipf and pcivf
Patch-3 adds port add and delete driver callbacks
Patch-4 adds port function state get and set callbacks
Patch-5 mlx5 vhca event notifier support to distribute subfunction
state change notification
Patch-6 adds SF auxiliary device
Patch-7 adds SF auxiliary driver
Patch-8 prepares eswitch to handler SF vport
Patch-9 adds eswitch helpers to add/remove SF vport
Patch-10 implements devlink port add/del callbacks
Patch-11 implements devlink port function get/set callbacks
Patch-12 to 14 adds documentation
Patch-12 added mlx5 port function documentation
Patch-13 adds subfunction documentation
Patch-14 adds mlx5 subfunction documentation
Subfunction support is discussed in detail in RFC [1] and [2].
RFC [1] and extension [2] describes requirements, design and proposed
plumbing using devlink, auxiliary bus and sysfs for systemd/udev
support. Functionality of this patchset is best explained using real
examples further below.
overview:
--------
A subfunction can be created and deleted by a user using devlink port
add/delete interface.
A subfunction can be configured using devlink port function attribute
before its activated.
When a subfunction is activated, it results in an auxiliary device on
the host PCI device where it is deployed. A driver binds to the
auxiliary device that further creates supported class devices.
example subfunction usage sequence:
-----------------------------------
Change device to switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Add a devlink port of subfunction flavour:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
Configure mac address of the port function:
$ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88
Now activate the function:
$ devlink port function set ens2f0npf0sf88 state active
Now use the auxiliary device and class devices:
$ devlink dev show
pci/0000:06:00.0
auxiliary/mlx5_core.sf.4
$ ip link show
127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff
altname enp6s0f0np0
129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff
$ rdma dev show
43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112
44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112
After use inactivate the function:
$ devlink port function set ens2f0npf0sf88 state inactive
Now delete the subfunction port:
$ devlink port del ens2f0npf0sf88
[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2
=================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmALKDwACgkQSD+KveBX
+j7qjQf6A1moPhhIlXROCzaJUjlAj2U291LWBveU+I6na6fjYjAAWHYwfv0YKQpo
Qb0NRt+9abgEpGidc4hOwIJKhK+vlWrQuehRt83aAfAwaN3OEeGuNllniWo821Hj
sNiJfSC/DslOlQSxKLsAs3Fduy/sV3GN9Zv7hEwOFgEr5QvB2c6H1XiypVP2Ecsd
ZXC3SuEWxIoRtfXEkTkJne9LNoiDChlvT1FR/z75h8HUBdAOjzBTQzBbM+8M4Msw
8aKUPya3FMRAPWsOgPhkpU0xTtH2Mi7MC9TlwiWmrK4Q3uvesIav8pVf7r3GNAZA
sipIZ4gP0M5SiCaZa8rIBpTXBHxmvg==
=jEG4
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 subfunction support
Parav Pandit says:
This patchset introduces support for mlx5 subfunction (SF).
A subfunction is a lightweight function that has a parent PCI function on
which it is deployed. mlx5 subfunction has its own function capabilities
and its own resources. This means a subfunction has its own dedicated
queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from
the parent PCI function.
When subfunction is RDMA capable, it has its own QP1, GID table and rdma
resources neither shared nor stolen from the parent PCI function.
A subfunction has dedicated window in PCI BAR space that is not shared
with the other subfunctions or parent PCI function. This ensures that all
class devices of the subfunction accesses only assigned PCI BAR space.
A Subfunction supports eswitch representation through which it supports tc
offloads. User must configure eswitch to send/receive packets from/to
subfunction port.
Subfunctions share PCI level resources such as PCI MSI-X IRQs with
their other subfunctions and/or with its parent PCI function.
Subfunction support is discussed in detail in RFC [1] and [2].
RFC [1] and extension [2] describes requirements, design and proposed
plumbing using devlink, auxiliary bus and sysfs for systemd/udev
support. Functionality of this patchset is best explained using real
examples further below.
overview:
--------
A subfunction can be created and deleted by a user using devlink port
add/delete interface.
A subfunction can be configured using devlink port function attribute
before its activated.
When a subfunction is activated, it results in an auxiliary device on
the host PCI device where it is deployed. A driver binds to the
auxiliary device that further creates supported class devices.
example subfunction usage sequence:
-----------------------------------
Change device to switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Add a devlink port of subfunction flavour:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
Configure mac address of the port function:
$ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88
Now activate the function:
$ devlink port function set ens2f0npf0sf88 state active
Now use the auxiliary device and class devices:
$ devlink dev show
pci/0000:06:00.0
auxiliary/mlx5_core.sf.4
$ ip link show
127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff
altname enp6s0f0np0
129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff
$ rdma dev show
43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112
44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112
After use inactivate the function:
$ devlink port function set ens2f0npf0sf88 state inactive
Now delete the subfunction port:
$ devlink port del ens2f0npf0sf88
[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2
=================
* tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Add devlink subfunction port documentation
devlink: Extend devlink port documentation for subfunctions
devlink: Add devlink port documentation
net/mlx5: SF, Port function state change support
net/mlx5: SF, Add port add delete functionality
net/mlx5: E-switch, Add eswitch helpers for SF vport
net/mlx5: E-switch, Prepare eswitch to handle SF vport
net/mlx5: SF, Add auxiliary device driver
net/mlx5: SF, Add auxiliary device support
net/mlx5: Introduce vhca state event notifier
devlink: Support get and set state of port function
devlink: Support add and delete devlink port
devlink: Introduce PCI SF port flavour and port attribute
devlink: Prepare code to fill multiple port function attributes
====================
Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Linus Torvalds
|
909b447dcc |
Networking fixes for 5.11-rc6, including fixes from can, xfrm, wireless,
wireless-drivers and netfilter trees. Nothing scary, Intel WiFi-related
fixes seemed most notable to the users.
Current release - regressions:
- dsa: microchip: ksz8795: fix KSZ8794 port map again to program
the CPU port correctly
Current release - new code bugs:
- iwlwifi: pcie: reschedule in long-running memory reads
Previous releases - regressions:
- iwlwifi: dbg: don't try to overwrite read-only FW data
- iwlwifi: provide gso_type to GSO packets
- octeontx2: make sure the buffer is 128 byte aligned
- tcp: make TCP_USER_TIMEOUT accurate for zero window probes
- xfrm: fix wraparound in xfrm_policy_addr_delta()
- xfrm: fix oops in xfrm_replay_advance_bmp due to a race between CPUs
in presence of packet reorder
- tcp: fix TLP timer not set when CA_STATE changes from DISORDER
to OPEN
- wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
Previous releases - always broken:
- igc: fix link speed advertising
- stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
- team: protect features update by RCU to avoid deadlock
- xfrm: fix disable_xfrm sysctl when used on xfrm interfaces themselves
- fec: fix temporary RMII clock reset on link up
- can: dev: prevent potential information leak in can_fill_info()
Misc:
- mrp: fix bad packing of MRP test packet structures
- uapi: fix big endian definition of ipv6_rpl_sr_hdr
- add David Ahern to IPv4/IPv6 maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dwFD
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes including fixes from can, xfrm, wireless,
wireless-drivers and netfilter trees. Nothing scary, Intel
WiFi-related fixes seemed most notable to the users.
Current release - regressions:
- dsa: microchip: ksz8795: fix KSZ8794 port map again to program the
CPU port correctly
Current release - new code bugs:
- iwlwifi: pcie: reschedule in long-running memory reads
Previous releases - regressions:
- iwlwifi: dbg: don't try to overwrite read-only FW data
- iwlwifi: provide gso_type to GSO packets
- octeontx2: make sure the buffer is 128 byte aligned
- tcp: make TCP_USER_TIMEOUT accurate for zero window probes
- xfrm: fix wraparound in xfrm_policy_addr_delta()
- xfrm: fix oops in xfrm_replay_advance_bmp due to a race between
CPUs in presence of packet reorder
- tcp: fix TLP timer not set when CA_STATE changes from DISORDER to
OPEN
- wext: fix NULL-ptr-dereference with cfg80211's lack of commit()
Previous releases - always broken:
- igc: fix link speed advertising
- stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA
addressing
- team: protect features update by RCU to avoid deadlock
- xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
themselves
- fec: fix temporary RMII clock reset on link up
- can: dev: prevent potential information leak in can_fill_info()
Misc:
- mrp: fix bad packing of MRP test packet structures
- uapi: fix big endian definition of ipv6_rpl_sr_hdr
- add David Ahern to IPv4/IPv6 maintainers"
* tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
rxrpc: Fix memory leak in rxrpc_lookup_local
mlxsw: spectrum_span: Do not overwrite policer configuration
selftests: forwarding: Specify interface when invoking mausezahn
stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
ibmvnic: Ensure that CRQ entry read are correctly ordered
MAINTAINERS: add missing header for bonding
net: decnet: fix netdev refcount leaking on error path
net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
can: dev: prevent potential information leak in can_fill_info()
net: fec: Fix temporary RMII clock reset on link up
net: lapb: Add locking to the lapb module
team: protect features update by RCU to avoid deadlock
MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers
net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
net/mlx5e: Revert parameters on errors when changing trust state without reset
net/mlx5e: Correctly handle changing the number of queues when the interface is down
net/mlx5e: Fix CT rule + encap slow path offload and deletion
net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
...
|
||
|
Jakub Kicinski
|
32e31b7827 |
Merge branch 'net-sfp-add-support-for-gpon-rtl8672-rtl9601c-and-ubiquiti-u-fiber'
Pali Rohár says: ==================== net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber This is fourth version of patches which add workarounds for RTL8672/RTL9601C EEPROMs and Ubiquiti U-Fiber Instant SFP. ==================== Link: https://lore.kernel.org/r/20210125150228.8523-1-pali@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Pali Rohár
|
f0b4f84767 |
net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant
The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information stored in its EEPROM. It claims to support all transceiver types including 10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is the only one supported. This module has also phys_id set to SFF, and the SFP subsystem currently does not allow to use SFP modules detected as SFFs. Add exception for this module so it can be detected as supported. This change finally allows to detect and use SFP GPON module Ubiquiti U-Fiber Instant on Linux system. EEPROM content of this SFP module is (where XX is serial number): 00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8 ???........??.?? 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20 ....UBNT 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41 .??)UF-INSTA 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36 NT 4 ??.6 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX .?..UBNTXXXXXXXX 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41 140123 `??A Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Pali Rohár
|
426c6cbc40 |
net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips
The workaround for VSOL V2801F brand based GPON SFP modules added in commit |
||
|
Takeshi Misawa
|
b8323f7288 |
rxrpc: Fix memory leak in rxrpc_lookup_local
Commit |
||
|
Jakub Kicinski
|
924b171c29 |
Merge branch 'mlxsw-various-fixes'
Ido Schimmel says: ==================== mlxsw: Various fixes Patch #1 fixes wrong invocation of mausezahn in a couple of selftests. The tests started failing after Fedora updated their libnet package from version 1.1.6 to 1.2.1. With the fix the tests pass regardless of libnet version. Patch #2 fixes an issue in the mirroring to CPU code that results in policer configuration being overwritten. ==================== Link: https://lore.kernel.org/r/20210128144820.3280295-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Ido Schimmel
|
b6f6881aaf |
mlxsw: spectrum_span: Do not overwrite policer configuration
The purpose of the delayed work in the SPAN module is to potentially
update the destination port and various encapsulation parameters of SPAN
agents that point to a VLAN device or a GRE tap. The destination port
can change following the insertion of a new route, for example.
SPAN agents that point to a physical port or the CPU port are static and
never change throughout the lifetime of the SPAN agent. Therefore, skip
over them in the delayed work.
This fixes an issue where the delayed work overwrites the policer
that was set on a SPAN agent pointing to the CPU. Modifying the delayed
work to inherit the original policer configuration is error-prone, as
the same will be needed for any new parameter.
Fixes:
|
||
|
Danielle Ratson
|
11df27f7fd |
selftests: forwarding: Specify interface when invoking mausezahn
Specify the interface through which packets should be transmitted so that the test will pass regardless of the libnet version against which mausezahn is linked. Fixes: |
||
|
Voon Weifeng
|
7cfc4486e7 |
stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.
[ 25.535095] ------------[ cut here ]------------
[ 25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[ 25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[ 25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[ 25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 5.11.0-rc4-intel-lts-MISMAIL5+ #5
[ 25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020
[ 25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[ 25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[ 25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286
[ 25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103
[ 25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff
[ 25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff
[ 25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c
[ 25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940
[ 25.731425] FS: 0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000
[ 25.740481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0
[ 25.754900] Call Trace:
[ 25.757631] <IRQ>
[ 25.759891] ? qdisc_put_unlocked+0x30/0x30
[ 25.764565] ? qdisc_put_unlocked+0x30/0x30
[ 25.769245] call_timer_fn+0x2e/0x140
[ 25.773346] run_timer_softirq+0x1f3/0x430
[ 25.777932] ? __hrtimer_run_queues+0x12c/0x2c0
[ 25.783005] ? ktime_get+0x3e/0xa0
[ 25.786812] __do_softirq+0xa6/0x2ef
[ 25.790816] asm_call_irq_on_stack+0xf/0x20
[ 25.795501] </IRQ>
[ 25.797852] do_softirq_own_stack+0x5d/0x80
[ 25.802538] irq_exit_rcu+0x94/0xb0
[ 25.806475] sysvec_apic_timer_interrupt+0x42/0xc0
[ 25.811836] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[ 25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[ 25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206
[ 25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f
[ 25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d
[ 25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00
[ 25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0
[ 25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000
[ 25.889918] cpuidle_enter+0x29/0x40
[ 25.893922] do_idle+0x24a/0x290
[ 25.897536] cpu_startup_entry+0x19/0x20
[ 25.901930] start_secondary+0x128/0x160
[ 25.906326] secondary_startup_64_no_verify+0xb0/0xbb
[ 25.911983] ---[ end trace b4c0c8195d0ba61f ]---
[ 25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.
Fixes:
|
||
|
Wong, Vee Khee
|
88af9bd4ef |
stmmac: intel: Add ADL-S 1Gbps PCI IDs
Added PCI IDs for both Ethernet TSN Controllers on the ADL-S. Also, skip SerDes programming sequences as these are being carried out at the BIOS level for ADL-S. Signed-off-by: Wong, Vee Khee <vee.khee.wong@intel.com> Link: https://lore.kernel.org/r/20210126085832.3814-1-vee.khee.wong@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Giacinto Cifelli
|
dad3a72f5e |
net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
lsusb -v for this device:
Bus 003 Device 007: ID 1e2d:0069
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1e2d
idProduct 0x0069
bcdDevice 0.00
iManufacturer 4 Cinterion Wireless Modules
iProduct 3 PLSx3
iSerial 5 fa3c1419
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 352
bNumInterfaces 10
bConfigurationValue 1
iConfiguration 2 Cinterion Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 3
CDC Union:
bMasterInterface 2
bSlaveInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 4
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 5
CDC Union:
bMasterInterface 4
bSlaveInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 6
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 7
CDC Union:
bMasterInterface 6
bSlaveInterface 7
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 7
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 8
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 0
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 8
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 6 Ethernet Networking
bInterfaceProtocol 0
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Ethernet:
iMacAddress 1 00A0C6C14190
bmEthernetStatistics 0x00000000
wMaxSegmentSize 16384
wNumberMCFilters 0x0001
bNumberPowerFilters 0
CDC Union:
bMasterInterface 8
bSlaveInterface 9
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 9
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 9
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Linus Torvalds
|
c64396cc36 |
A set of PI futex fixes:
- Address a longstanding issue where the user space part of the PI futex
is not writeable. The kernel returns with inconsistent state which can
in the worst case result in a UAF of a tasks kernel stack. The solution
is to establish consistent kernel state which makes future operations
on the futex fail because user space and kernel space state are
inconsistent. Not a problem as PI futexes fundamentaly require a
functional RW mapping and if user space pulls the rug under it, then it
can keep the pieces it asked for.
- Address an issue where the return value is incorrect in case that the
futex was acquired after a timeout/signal made the waiter drop out of
the rtmutex wait. In one of the corner cases the kernel returned an
error code despite having successfully acquired the futex.
-----BEGIN PGP SIGNATURE-----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=wzqT
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of PI futex fixes:
- Address a longstanding issue where the user space part of the PI
futex is not writeable. The kernel returns with inconsistent state
which can in the worst case result in a UAF of a tasks kernel
stack.
The solution is to establish consistent kernel state which makes
future operations on the futex fail because user space and kernel
space state are inconsistent. Not a problem as PI futexes
fundamentaly require a functional RW mapping and if user space
pulls the rug under it, then it can keep the pieces it asked for.
- Address an issue where the return value is incorrect in case that
the futex was acquired after a timeout/signal made the waiter drop
out of the rtmutex wait.
In one of the corner cases the kernel returned an error code
despite having successfully acquired the futex"
* tag 'locking-urgent-2021-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Handle faults correctly for PI futexes
futex: Simplify fixup_pi_state_owner()
futex: Use pi_state_update_owner() in put_pi_state()
rtmutex: Remove unused argument from rt_mutex_proxy_unlock()
futex: Provide and use pi_state_update_owner()
futex: Replace pointless printk in fixup_owner()
futex: Ensure the correct return value from futex_lock_pi()
|
||
|
Eric Dumazet
|
bbc20b7042 |
net: reduce indentation level in sk_clone_lock()
Rework initial test to jump over init code if memory allocation has failed. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210127152731.748663-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
e5ff2cb9cf |
xen: branch for v5.11-rc6
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYBLX8QAKCRCAXGG7T9hj vr2TAP4ylwxPVbf1l1V8zYCtCoNg087+Ubolr5kXXJkesG/nkgD6A2ix2oN1sC0Z kbFBeZHqgP4AbVl7IhBALVFa1GPxWQg= =NPGM -----END PGP SIGNATURE----- Merge tag 'for-linus-5.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A fix for a regression introduced in 5.11 resulting in Xen dom0 having problems to correctly initialize Xenstore. - A fix for avoiding WARN splats when booting as Xen dom0 with CONFIG_AMD_MEM_ENCRYPT enabled due to a missing trap handler for the #VC exception (even if the handler should never be called). - A fix for the Xen bklfront driver adapting to the correct but unexpected behavior of new qemu. * tag 'for-linus-5.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled xen: Fix XenStore initialisation for XS_LOCAL xen-blkfront: allow discard-* nodes to be optional |
||
|
Linus Torvalds
|
228345bf98 |
asm-generic/ia64 fixes, mark as orphaned
Commit |
||
|
Linus Torvalds
|
7485e08eec |
ARM: SoC fixes for v5.11, part 2
These are the current arm-soc bug fixes for linux-5.11. I already merged
a larger set that just came in during the past three days but has not
had much exposure in linux-next, so these are the ones I merged last week.
Most of these are for the NXP i.MX platform (descriptions from their
pull request):
- Fix pcf2127 reset for imx7d-flex-concentrator board.
- Fix i.MX6 suspend with Thumb-2 kernel.
- Fix ethernet-phy address issue on imx6qdl-sr-som board.
- Fix GPIO3 `gpio-ranges` on i.MX8MP.
- Select SOC_BUS for IMX_SCU driver to fix build issue.
- Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
#pwm-cells conversion.
- Fix duplicated bus node name for i.MX8MN SoC.
- Fix reset register offset on LS1028A SoC.
- Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
index consistent with previous kernel version.
- Selecting ARM_GIC_V3 on non-CP15 processors to fix one build failure
with i.MX8M SoC driver.
- Fix typos with status property on imx6qdl-kontron-samx6i board.
- Fix duplicated regulator-name on imx6qdl-gw52xx board.
Aside from i.MX, the bugfixes are all over the place:
- Coccinelle found a refcount imbalance on integrator
- defconfig fix for TI K3
- A boot regression fix for ST ux500
- A code preemption fix for the optee driver
- USB DMA regression on Broadcom Stingray
- A bogus boot time warning fix for at91 code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Vneq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the current arm-soc bug fixes for linux-5.11. I already
merged a larger set that just came in during the past three days but
has not had much exposure in linux-next, but this is the subset I
merged last week.
Most of these are for the NXP i.MX platform (descriptions from their
pull request):
- Fix pcf2127 reset for imx7d-flex-concentrator board.
- Fix i.MX6 suspend with Thumb-2 kernel.
- Fix ethernet-phy address issue on imx6qdl-sr-som board.
- Fix GPIO3 `gpio-ranges` on i.MX8MP.
- Select SOC_BUS for IMX_SCU driver to fix build issue.
- Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
#pwm-cells conversion.
- Fix duplicated bus node name for i.MX8MN SoC.
- Fix reset register offset on LS1028A SoC.
- Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
index consistent with previous kernel version.
- Selecting ARM_GIC_V3 on non-CP15 processors to fix one build
failure with i.MX8M SoC driver.
- Fix typos with status property on imx6qdl-kontron-samx6i board.
- Fix duplicated regulator-name on imx6qdl-gw52xx board.
Aside from i.MX, the bugfixes are all over the place:
- Coccinelle found a refcount imbalance on integrator
- defconfig fix for TI K3
- A boot regression fix for ST ux500
- A code preemption fix for the optee driver
- USB DMA regression on Broadcom Stingray
- A bogus boot time warning fix for at91 code"
* tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Include bcm2835 subsequents into search
arm64: dts: broadcom: Fix USB DMA address translation for Stingray
drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]
drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs
tee: optee: replace might_sleep with cond_resched
firmware: imx: select SOC_BUS to fix firmware build
arm64: dts: imx8mp: Correct the gpio ranges of gpio3
ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
ARM: imx: build suspend-imx6.S with arm instruction set
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
ARM: dts: ux500: Reserve memory carveouts
arm64: defconfig: Drop unused K3 SoC specific options
bus: arm-integrator-lm: Add of_node_put() before return statement
ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming
ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status
ARM: imx: fix imx8m dependencies
ARM: dts: tbs2910: rename MMC node aliases
arm64: dts: ls1028a: fix the offset of the reset register
arm64: dts: imx8mn: Fix duplicate node name
ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight
|
||
|
Linus Torvalds
|
b0dfa64dcd |
RDMA 5.11 second RC pull request
Several recent regressions and some bug fixes - Typo corrupting the max_recv_sge for cxgb4 - Regression from re-using kernel enums as a HW AbI in vmw_pvrdma - Sleeping inside a spinlock in hns - Revert the attempt to fix devlink deadlocks as the fix is more buggy - Typo in sysfs_emit_at conversions - Revert the removal of VLAN support in rxe -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmASxQwACgkQOG33FX4g mxq5uw/6AwjSrC2gP46uZTB+aWN7EeFqk4+/OkxBWOrvp9TNRrrwu7dYum988It4 FJCighjyk0lcF75Ma/5Q7D2+V6DextMoSxaLb1RLHCGi50VhzzaSI2NtGjFxaZ1G GILNusIFraR9dqx+T2TK+AN5hCnek+yYIsrr6AOh0Vd29NFy4U8XDxkjnisiNO+z vKAiAbk5cHHi8DLU6TwdTUtg+jozlqUP4g79nQ3WjqLywPbcLFHNj0VdaaEBHaqC m1VR4hDdPpkzvdLJv46tgy79y2BjEt04Q/pHGTLL+qvZGHefcIw7aRC2Mg6+6ytI lVhjYkBR5UrE7/H6BEYvqVcneOypWXZFdF8Jxl4dzkZPQZ5wh0J2LZykQD3LCn8K OHcy4ZZlgBnWtwAO8zK60kmZ0otl1Yc2sz7hOniLUYPrVsZoPWA+Zqqv15KFHAT+ +pbv4O6A9tmDshIw/XSensbb9XQy6ngAxWqkV7/zNfVbf52vyDblkOfuYJB7cFfp mEEoC4oBP1IyKrcOzlWa6v30oOlIqT0CmJTmhnFhiMI4x6j67cqJRccjxYA2kuU3 uHhSHYNcZjwuOr1D0qat9GfxWBKV8SziwGj4S7tgYxVnBTE6o/f1b+0Aq+dmkXtM QUATE/HgfMBZZUBwdVQz3so9UbQqQGKrVFo3viI5O+CbRqArosY= =P74g -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "Several recent regressions and some bug fixes: - Typo corrupting the max_recv_sge for cxgb4 - Regression from re-using kernel enums as a HW AbI in vmw_pvrdma - Sleeping inside a spinlock in hns - Revert the attempt to fix devlink deadlocks as the fix is more buggy - Typo in sysfs_emit_at conversions - Revert the removal of VLAN support in rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: Revert "RDMA/rxe: Remove VLAN code leftovers from RXE" RDMA/usnic: Fix misuse of sysfs_emit_at Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion" RDMA/hns: Use mutex instead of spinlock for ida allocation RDMA/vmw_pvrdma: Fix network_hdr_type reported in WC RDMA/cxgb4: Fix the reported max_recv_sge value |
||
|
Linus Torvalds
|
25221c99c5 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina: - NULL pointer dereference regression fix for Wacom driver (Jason Gerecke) - functional regression fix for pam handling on some Elan and Synaptics touchpads (Kai-Heng Feng) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: Correct NULL dereference on AES pen proximity HID: multitouch: Apply MT_QUIRK_CONFIDENCE quirk for multi-input devices |
||
|
Linus Torvalds
|
fc856f1df7 |
media fixes for v5.11-rc6
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmASjOAACgkQCF8+vY7k 4RULWBAAhW4Pf4IrLqb6VLWs7IALGmcslBmMK0OVa/vyZNXPOOF8HYgl4ls6O62j qS0Wbwkp50M9d62fEOmvhsflYgdm6Eofpku0BM+pZKqqG7caI38C4xZyBkUcW11s c/Y/8CpOpYVfjZ/NMmfhgBAiCG+7ByZQB9FWGhpNkpxaQwfLnJD/+8jDl7CBLCv2 +p1ydBhTE7PmqnNYWKK167Y54BkHQ/PsSnwv+y9sM62qFGG+qh8xucc1ZU9ubZNf IJi0Zo8fPoxiOZXMKvnDzA+miUeYLYdbSXUPtYrsDqtSzvvdbJ0wXxDUjIGnIvg0 8J7M8RpeZIjoVHua0kbZtJlQnDpX23I4EcE9YFa3JAkKUxMA1brBf2k7UdnO0+2G VL1Xp2iw9C43lBy2qm0V7mJeG0tMXOrJu6xVkXlRY4NdOx2WceHACVNtGhNRGjjm 4t5FM1locj8f1e2B7f0Q2fYUI6b4jfFmI+cPzPhKB/78ons97EAcfVcKveaSuRrc uB47xFxTIhyI/djtQ2/wGfJe2jvclpZ6gN/mNXqyjdvo6Gqsc7zJt8rBpTezVFA5 u3oP0TUIa7D0MzlJWuHYMCJ6tH7ToKbr0IXBJ6Kl5u116QCWNOm/PC5+hTEEl9eX wXl4tLVKF+odEvkdN6lS/AU9zoT0fAvLg9LKP5rWBrY7rhuxmYk= =i9ft -----END PGP SIGNATURE----- Merge tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a V4L2 core regression at videobuf2 when checking for single-plane dmabuf - a change at uAPI header v4l2-subdev.h, fixing a breakage as BIT() macro is not available in userspace - fix some regressions at RC core due to the usage of microseconds everywhere on it - a fix for a race condition at RC core - a rename on a newly-introduced kAPI symbol (v4l2_get_link_rate), currently used only by a single driver - Regression fixes for rcar-vin, cedrus, ite-cir, hantro, css, venus, and cec drivers. * tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: hantro: Fix reset_raw_fmt initialization media: cec: add stm32 driver media: cedrus: Fix H264 decoding media: v4l2-subdev.h: BIT() is not available in userspace media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing" media: rc: ite-cir: fix min_timeout calculation media: venus: core: Fix platform driver shutdown media: rc: fix timeout handling after switch to microsecond durations media: v4l: common: Fix naming of v4l2_get_link_rate media: rcar-vin: fix return, use ret instead of zero media: ccs: Get static data version minor correctly media: ccs-pll: Fix link frequency for C-PHY media: rc: ensure that uevent can be read directly after rc device register |
||
|
Linus Torvalds
|
a467b07361 |
A handful of clk driver fixes
- Build fix for CONFIG_PM=n in the mmp2 driver - Kconfig warning for unmet dependencies in the i.MX driver - Make the camera AHB clk always be enabled on qcom sc7180 - Use rate round down semantics for qcom sm8250 SD clks -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmAScyURHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSXFeA//aH8y3ANME2WlpmjRBbJq2d0xRniiVwtH dNtqfI1lLyQ9CHAdZXOu+A+W3yLFQeuEj0ZQ7RmF/9nBGlK/wsBr6nGUSP6sU4k2 fMYsYKnAOcAndOGti6F0f3sErqpBjP8hB7vpP3hc8k9rJupUQzlNsPNjafhiXBLO YlV7S0PZYfDsj2mCS+iztNTIlCayJ4yL8eF+T22BrtuFPZIm5mdCW9oKmtzIFy33 OzY9sN+umjZDU1pEKERO/um8HrXLRkdvjNBP5KlnmKeyKG6SXdsTF4YcHmkRmgrR 5EBTzwo5keQGb5ZIiAESKt0O2N4x1k0+C8p4/7ooCeSH+6Lb9NzQv4mavMHEV9ly u+7pP8wQFARN/XrO1Q2yTK5QgM5ezuTmQWH8H9RimZPYB54FnooxZ+YreTfPUOxc fzJS19vbU31nevmb5zeMF8Z02L09clWulo9HIzc0jk2nf7fj9z3nduQ9mNL/zCs7 L772m5qVEj5ScY0qLR8TtFKOwM1QN+LkwldKr+NHKzby0ZzD4K33cubLWZ3hkayx PPLGHPlEq9Ogut3L0Js0pXRyqArnKkNjRJ+qdGHg75KyQvU8nmMXZ0jt6juI6Jus VpD8PR4pNftgd24vbZgAVdV+UqOY/x7kYglq49jXzrxlJ3qEL6xvxG/SOpEJ/84C iA+I3pzZers= =wIlb -----END PGP SIGNATURE----- Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of clk driver fixes: - Build fix for CONFIG_PM=n in the mmp2 driver - Kconfig warning for unmet dependencies in the i.MX driver - Make the camera AHB clk always be enabled on qcom sc7180 - Use rate round down semantics for qcom sm8250 SD clks" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: mmp2: fix build without CONFIG_PM clk: qcom: gcc-sm250: Use floor ops for sdcc clks clk: imx: fix Kconfig warning for i.MX SCU clk clk: qcom: gcc-sc7180: Mark the camera abh clock always ON |
||
|
Linus Torvalds
|
be4a338596 |
sound fixes for 5.11-rc6
Although the incoming fixes haven't settled down yet, all changes here are small and mostly device-specific fixes, so nothing look worrisome. - Yet another USB-audio regression fixes - HD-audio ID fix and device-specific quirks - SOF Intel / SoundWire fixes including topology - ASoC Qualcomm and Mediatek fixes -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmAScssOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE8mmw//ao2U5h564+N8VPbY/ftGtm5MqF7T9Fd+DgGH xBu3tSG7ZHjEACWDOQ8J2MA6filbNlFkPi8sm8JpCXoVhllBTlpTTJY4eFiE4bQ+ stJgFkhUKJ6eRePWpNE1txAuwdYfGG3eS7gd51lrKsN19kpx6fXgSnXP4RqhCokf SikAwrZsWQZR9zvBWNnnW6Jw4UPVKhO1cC79ia5ZwvDls4DsA8yscwzo7aDWS346 roh8Q/+Pf9k+/wJcbComHZzV11LJ/VUF0jwI2L3VX4US2saP/I9reHz9AO0jhS6V VL4U6EPy+EFGVGhtYGR8dcxBk7PnOnhcZlNsbYa3OhPwL9YMXFE7n6glBvSLLWCU gGxsp8OwRMFcUYD8M4y1dCD3PZCS5gOp3k7ko3McbU6PWmpBQujuzwmXOdYkeBMR 9L9I9Al/6PVZN4NB7j4rLGTEgXfspvAenjERo3VP78qBIeg9xUpr++5aePSJMeXS g9q5Dr/urW0aQEqhSbF80719eWBHSXYvS72hq3wjbSZOszaySEWpewtHc+64PjNE AebGjd/UUTiGs1LsGkurnwABRMvz/gQLKWszfxOnL8nsX5+SmK7d5ruYrMa0KEAm KU/yBDhXmC+QdpB5p1wTM21bHOKvW76PBrpnWPSl6ulm1cK1xOiMC5n7fXwaARfM jB4u1xs= =IWq4 -----END PGP SIGNATURE----- Merge tag 'sound-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Although the incoming fixes haven't settled down yet, all changes here are small and mostly device-specific fixes, so nothing look worrisome. - Yet another USB-audio regression fixes - HD-audio ID fix and device-specific quirks - SOF Intel / SoundWire fixes including topology - ASoC Qualcomm and Mediatek fixes" * tag 'sound-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: hda/via: Apply the workaround generically for Clevo machines ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup ASoC: mediatek: mt8192-mt6359: add format constraints for RT5682 ASoC: ak4458: correct reset polarity ASoC: SOF: SND_INTEL_DSP_CONFIG dependency ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies ALSA: hda: intel-dsp-config: add PCI id for TGL-H ALSA: usb-audio: workaround for iface reset issue ALSA: pcm: One more dependency for hw constraints ALSA: hda/realtek: Enable headset of ASUS B1400CEPE with ALC256 ASoC: Intel: Skylake: Zero snd_ctl_elem_value ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete ASoC: qcom: Fix number of HDMI RDMA channels on sc7180 ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default ASoC: topology: Properly unregister DAI on removal ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values() ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field ASoC: AMD Renoir - refine DMI entries for some Lenovo products ... |
||
|
Wang Hai
|
757fed1d08 |
Revert "mm/slub: fix a memory leak in sysfs_slab_add()"
This reverts commit |
||
|
Lorenzo Carletti
|
d1f3bdd4ea |
net: dsa: rtl8366rb: standardize init jam tables
In the rtl8366rb driver there are some jam tables which contain undocumented values. While trying to understand what these tables actually do, I noticed a discrepancy in how one of those was treated. Most of them were plain u16 arrays, while the ethernet one was an u16 matrix. By looking at the vendor's droplets of source code these tables came from, I found out that they were all originally u16 matrixes. This commit standardizes the jam tables, turning them all into jam_tbl_entry arrays. Each entry contains 2 u16 values. This change makes it easier to understand how the jam tables are used and also makes it possible for a single function to handle all of them, removing some duplicated code. Signed-off-by: Lorenzo Carletti <lorenzo.carletti98@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
5cc921a38f |
Merge branch 'mlx5-updates-2021-01-26'
Saeed Mahameed says: ==================== mlx5 devlink traps support Add support for devlink traps [1] reporting in mlx5, mlx5 will also report/trap packets filtered due to dest mac steering miss The first patch in the series defines the new DMAC trap type in devlink for this purpose. Other patches in the series are mlx5 only and they gradually traps support. Supported traps: DMAC: Drops due to destination MAC not configured in the MAC table VLAN: Drops due to vlan not configured in the vlan table Design note: devlink instance is managed by the low level mlx5 core layer, mlx5 core will serve as an abstraction layer for trap reporting, since we might have multiple mlx5 interfaces who might want to report traps on the same device. ==================== Link: https://lore.kernel.org/r/20210126232419.175836-1-saeedm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
eb3862a052 |
net/mlx5e: Enable traps according to link state
Avoid trapping packets when the interface is down, and revive them when interface is back up. Add API to mlx5 core retrieving the action by trap id. Use it to apply traps when interface is up, and disable then when interface is down. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
49fdbd2341 |
net/mlx5e: Add listener to DMAC filter trap event
Add support for trapping packets which didn't match any DMAC in the MAC table. Add a listener which adds/removes MAC trap rule in the flow steering according to the trap's action trap/drop. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
70038b73e4 |
net/mlx5e: Add listener to trap event
Add support for listening to blocking events in the ETH driver. Listen on trap event. If received, call mlx5e_handle_trap_event() which: 1) Verifies if driver needs open/close trap-RQ with respect to the active traps count. 2) Inspects trap id and its action (trap/drop) and add/remove the flow steering rule accordingly. Otherwise, return an error. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
5543e989fe |
net/mlx5e: Add trap entity to ETH driver
Introduce mlx5e_trap which includes a dedicated RQ and NAPI for trapped packets. Trap-RQ processes packets that were destined to be dropped, but for debug and visibility sake these packets are trapped and reported to devlink. Trap-RQ connects between the HW and the driver and is not a part of a channel. Open mlx5e_create_rq() and mlx5_core_destroy_rq() as API and add dedicate RQ handlers which report to devlink of trapped packets. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
cf74760932 |
net/mlx5e: Expose RX dma info helpers
In order to support RQs outside of channel context, change mlx5e_init_di_list() signature to accept NUMA node instead of cpu. In addition, expose dma info helpers as API. This API will be used for RQ's creation in other files in downstream patches. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
ceef1b66bd |
net/mlx5e: Add flow steering DMAC trap rule
Add flow group to the L2 table to hold the catch-all DMAC rule. Add API which adds/removes DMAC trap rule. This rule catches packets that were destined to be dropped due to no-match with previous DMAC rules. The trap rule steer these packets to the trap tir related to the trap-RQ. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
e2a1a00498 |
net/mlx5e: Add flow steering VLAN trap rule
Add flow group to the VLAN table to hold the catch-all VLAN rule. Add API which adds/removes VLAN trap rule. This rule catches packets that were destined to be dropped due to no-match with previous VLAN rules. The trap rule steer these packets to the trap tir related to the trap-RQ. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
1c46d7409f |
net/mlx5e: Optimize promiscuous mode
Change steering flow to optimize traffic in promiscuous mode. On demand, add a high priority table containing a catch-all rule. All incoming packets are caught by this rule and steered directly to the TTC table. Prior to this change, packets in promiscuous mode may suffer from up to 4 steering hops before reaching TTC table. In addition, this patch will allow us adding a catch-all rule at the end of MAC table to serve MAC trap, with no impact on promiscuous mode performance. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
241dc15939 |
net/mlx5: Notify on trap action by blocking event
In order to allow mlx5 core driver to trigger synchronous operations to its consumers, add a blocking events handler. Add wrappers to blocking_notifier_[call_chain/chain_register/chain_unregister]. Add trap callback for action set and notify about this change. Following patches in the set add a listener for this event. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
3eac5d949a |
net/mlx5: Rename events notifier header
Change the naming of events notifier head to clarify that it handles only firmware events. Coming patches in the set, add event notifier for software events. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
f679247f25 |
net/mlx5: Register to devlink DMAC filter trap
Core driver is registered to the devlink traps service, which enables the admin to redeem packets that were destined to be dropped due to a particular reason. Register to DMAC filter, allow visibility of packets that were filtered out by the MAC table. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
82e6c96f04 |
net/mlx5: Register to devlink ingress VLAN filter trap
Add traps registration to mlx5_core devlink register/unregister flow. This patch registers INGRESS_VLAN_FILTER trap. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
3d347b1b19 |
net/mlx5: Add support for devlink traps in mlx5 core driver
Add devlink traps infra-structure to mlx5 core driver. Add traps list to mlx5_priv and corresponding API: - mlx5_devlink_trap_report() to wrap trap reports to devlink - mlx5_devlink_trap_get_num_active() to decide whether to open/close trap resources. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aya Levin
|
e78ab16459 |
devlink: Add DMAC filter generic packet trap
Add packet trap that can report packets that were dropped due to destination MAC filtering. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Andrew Lunn
|
63368a7416 |
net: dsa: mv88e6xxx: Make global2 support mandatory
Early generations of the mv88e6xxx did not have the global 2 registers. In order to keep the driver slim, it was decided to make the code for these registers optional. Over time, more generations of switches have been added, always supporting global 2 and adding more and more registers. No effort has been made to keep these additional registers also optional to slim the driver down when used for older generations. Optional global 2 now just gives additional development and maintenance burden for no real gain. Make global 2 support always compiled in. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20210127003210.663173-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
44a674d6f7 |
mlx5-fixes-2021-01-26
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmAQqBoACgkQSD+KveBX +j66NQf/YJevAW1GWzJvvpIyE3YdgxwAvLOWw3cColBZDEAzqCXr52Rvm++IC4Xr ZsDR0wMPghppyzounyG8IxbYLDnUFYTp7Lzhxc0J2HLIv8wmyhDEqjQZJO2cYtC6 fSqj0F4JACRhysAeQxh982iF3y8qKRESoukkk5rSfamhBOft0X+wz0L1/eAyNg+l WZccPXtayTvqG4GY2iZmEkPK1Ex75VGvoZzf1Iiy3t0DCX/pEqw9eLnuvdoaRNGg +ggFHKiwcKgGUWyw6rdvzoY+wc5yA92q8Qr0KTa69ZCrI/3Tn/c+k+SmteAp4loz IeppiUlaPdOCqf2zgSDa1PS9qWNdpQ== =u8TU -----END PGP SIGNATURE----- Merge tag 'mlx5-fixes-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-01-26 This series introduces some fixes to mlx5 driver. * tag 'mlx5-fixes-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset net/mlx5e: Revert parameters on errors when changing trust state without reset net/mlx5e: Correctly handle changing the number of queues when the interface is down net/mlx5e: Fix CT rule + encap slow path offload and deletion net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled net/mlx5: Maintain separate page trees for ECPF and PF functions net/mlx5e: Fix IPSEC stats net/mlx5e: Reduce tc unsupported key print level net/mlx5e: free page before return net/mlx5e: E-switch, Fix rate calculation for overflow net/mlx5: Fix memory leak on flow table creation error flow ==================== Link: https://lore.kernel.org/r/20210126234345.202096-1-saeedm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |