[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Drop stale exynos file pattern from MAINTAINERS file
The old "exynos" directory is removed from MAINTAINERS as Samsung Exynos display bindings have been relocated. This resolves a warning from get_maintainers.pl about no files matching the outdated directory.
- Constify struct exynos_drm_ipp_funcs
By making struct exynos_drm_ipp_funcs constant, the patch enhances security by moving the structure to a read-only section of memory. This change results in a slight reduction in the data section size.
- Remove unnecessary code
The function exynos_atomic_commit is removed as it became redundant after a previous update. This cleans up the code and eliminates unused function declarations.
One fixup
- Fix wrong assignment in gsc_bind()
A double assignment in gsc_bind() was flagged by the cocci tool and corrected to fix an incorrect assignment, addressing a potential issue introduced in a prior commit.
-----BEGIN PGP SIGNATURE-----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=3OTa
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Three cleanups
- Drop stale exynos file pattern from MAINTAINERS file
The old "exynos" directory is removed from MAINTAINERS as Samsung Exynos display bindings have been relocated. This resolves a warning from get_maintainers.pl about no files matching the outdated directory.
- Constify struct exynos_drm_ipp_funcs
By making struct exynos_drm_ipp_funcs constant, the patch enhances security by moving the structure to a read-only section of memory. This change results in a slight reduction in the data section size.
- Remove unnecessary code
The function exynos_atomic_commit is removed as it became redundant after a previous update. This cleans up the code and eliminates unused function declarations.
One fixup
- Fix wrong assignment in gsc_bind()
A double assignment in gsc_bind() was flagged by the cocci tool and corrected to fix an incorrect assignment, addressing a potential issue introduced in a prior commit.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909004641.406858-1-inki.dae@samsung.com
Driver Changes:
- Expose fan speed via hwmon (Raag)
- Correction to Wa_14019159160 on ARL (John H)
- Whitelist COMMON_SLICE_CHICKEN1 for UMD access on DG2/MTL/ARL (Dnyaneshwar)
- Do not attempt to load the GSC multiple times to avoid hanging GSC HW (Daniele)
- Populate /sys/class/drm/cardX/engines/ even if one engine fails (Andi)
- Use kmemdup_array instead of kmemdup for multiple allocation (Yu)
- Remove extra unlikely() (Hongbo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztrfr_Wuurfa-3Rv@jlahtine-mobl.ger.corp.intel.com
Instead of trying to use close_fd() on failure exits, just have
criu_get_prime_handle() store the file reference without inserting
it into descriptor table.
Then, once the callers are past the last failure exit, they can go
and either insert all those file references into the corresponding
slots of descriptor table, or drop all those file references and
free the unused descriptors.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using drm_gem_prime_handle_to_fd() to set dmabuf up and insert it into
descriptor table, only to have it looked up by file descriptor and
remove it from descriptor table is not just too convoluted - it's
racy; another thread might have modified the descriptor table while
we'd been going through that song and dance.
Switch kfd_mem_export_dmabuf() to using drm_gem_prime_handle_to_dmabuf()
and leave the descriptor table alone...
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once something had been put into descriptor table, the only thing you
can do with it is returning descriptor to userland - you can't withdraw
it on subsequent failure exit, etc. You certainly can't count upon
it staying in the same slot of descriptor table - another thread
could've played with close(2)/dup2(2)/whatnot.
drm_gem_prime_handle_to_fd() creates a dmabuf, allocates a descriptor
and attaches dmabuf's file to it (the last two steps are done
in dma_buf_fd()). That's nice when all you are going to do is
passing a descriptor to userland. If you just need to work with the
resulting object or have something else to be done that might fail,
drm_gem_prime_handle_to_fd() is racy.
The problem is analogous to one with anon_inode_getfd(), and solution
is similar to what anon_inode_getfile() provides.
Add drm_gem_prime_handle_to_dmabuf() - the "set dmabuf up" parts of
drm_gem_prime_handle_to_fd() without the descriptor-related ones.
Instead of inserting into descriptor table and returning the file
descriptor it just returns the struct file.
drm_gem_prime_handle_to_fd() becomes a wrapper for it. Other users
will be introduced in the next commit.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per the comments, these are variable sized arrays.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit updates described non-existent parameters 'resv' and
'sync_mode', and failed to describe the existing 'sync' parameter.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Function parameter or struct member 'sync' not described in 'amdgpu_vm_cpu_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'resv' description in 'amdgpu_vm_cpu_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'sync_mode' description in 'amdgpu_vm_cpu_prepare'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to jpeg_v2_dec_ring_parse_cs() but it has different
register ranges and a few other registers access.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch extends the same cs parser from JPEG v4.0.3 to
other JPEG versions (v2 and above).
Rename to more common name as jpeg_v2_dec_ring_parse_cs()
from jpeg_v4_0_3_dec_ring_parse_cs().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below:
0: 2.5GT/s, x4 250Mhz
1: 8.0GT/s, x4 616Mhz *
2: 8.0GT/s, x4 1143Mhz *
the middle level can be removed since it is always skipped on
smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the features set on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid memory leaks, release q_extra_data when exiting the restore queue.
v2: Correct the proto (Alex)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.
To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.
[How]
Narrow it down so that only the plane that has a change in zpos will
require a reset.
As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.
For example, the following zpos update does not change z-ordering:
Plane A: zpos 2 -> 3
Plane B: zpos 1 -> 2
=> Plane A is still on top of plane B: no reset needed
Whereas this one does change z-ordering:
Plane A: zpos 2 -> 1
Plane B: zpos 1 -> 2
=> Plane A changed from on top, to below plane B: reset needed
Fixes: 38e0c3df6d ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
routine as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
-----BEGIN PGP SIGNATURE-----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=k7C0
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Remove percpu irq related code in the timer-of initialization routine
as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
* tag 'timers_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/imx-tpm: Fix next event not taking effect sometime
clocksource/drivers/imx-tpm: Fix return -ETIME when delta exceeds INT_MAX
clocksource/drivers/timer-of: Remove percpu irq related code
Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZt1VBw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynTEACgzhPgd29DA9pmR+BcDPJtxLBRQtcAoNiAFApH
Gzo5Ucw+Snl5wQvBJGhI
=J4Is
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
Here are a handful of small USB fixes for 6.11-rc7. Included in here
are:
- dwc3 driver fixes for two reported problems
- two typec ucsi driver fixes
- cdns2 controller reset fix
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZt1Wgw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykqYACfVlrFsDTuVhom0Gf3Hw1C7YCZWhsAn1ItrLUQ
W7rwOrF1P7WtH7A3SzZt
=QK7s
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a handful of small USB fixes for 6.11-rc7. Included in here
are:
- dwc3 driver fixes for two reported problems
- two typec ucsi driver fixes
- cdns2 controller reset fix
All of these have been in linux-next this week with no reported
problems"
* tag 'usb-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix cable registration
usb: typec: ucsi: Fix the partner PD revision
usb: cdns2: Fix controller reset issue
usb: dwc3: core: update LC timer as per USB Spec V3.2
usb: dwc3: Avoid waking up gadget during startxfer
driver and shared RCGs, and one fix for the Starfive JH7110 SoC.
- The Alpha PLL clk_ops had multiple problems around setting rates.
There are a handful of patches here that fix masks and skip enabling
the clk from set_rate() when the PLL is disabled. The PLLs are
crucial to operation of the system as almost all frequencies in the
system are derived from them.
- Parking shared RCGs at a slow always on clk at registration time
breaks stuff. USB host mode can't handle such a slow frequency and
the serial console gets all garbled when the UART clk is handed over
to the kernel. There's a few patches that don't use the shared
clk_ops for the UART clks and another one to skip parking the USB clk
at registration time.
- The Starfive PLL driver used for the CPU was busted causing cpufreq
to fail because the clk didn't change to a safe parent during
set_rate(). The fix is to register a notifier and switch to a safe
parent so the PLL can change rate in a glitch free manner.
-----BEGIN PGP SIGNATURE-----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=ypMR
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A pile of Qualcomm clk driver fixes with two main themes: the alpha
PLL driver and shared RCGs, and one fix for the Starfive JH7110 SoC.
- The Alpha PLL clk_ops had multiple problems around setting rates.
There are a handful of patches here that fix masks and skip
enabling the clk from set_rate() when the PLL is disabled. The PLLs
are crucial to operation of the system as almost all frequencies in
the system are derived from them.
- Parking shared RCGs at a slow always on clk at registration time
breaks stuff.
USB host mode can't handle such a slow frequency and the serial
console gets all garbled when the UART clk is handed over to the
kernel. There's a few patches that don't use the shared clk_ops for
the UART clks and another one to skip parking the USB clk at
registration time.
- The Starfive PLL driver used for the CPU was busted causing cpufreq
to fail because the clk didn't change to a safe parent during
set_rate().
The fix is to register a notifier and switch to a safe parent so
the PLL can change rate in a glitch free manner"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc8280xp: don't use parking clk_ops for QUPs
clk: starfive: jh7110-sys: Add notifier for PLL0 clock
clk: qcom: gcc-sm8650: Don't use shared clk_ops for QUPs
clk: qcom: gcc-sm8550: Don't park the USB RCG at registration time
clk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPs
clk: qcom: gcc-x1e80100: Don't use parking clk_ops for QUPs
clk: qcom: ipq9574: Update the alpha PLL type for GPLLs
clk: qcom: gcc-x1e80100: Fix USB 0 and 1 PHY GDSC pwrsts flags
clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabled
clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API
clk: qcom: clk-alpha-pll: Fix the pll post div mask
Single ufs driver fix quirking around another device spec violation.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZtxUriYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishTJSAP424eDE
VgYI/b+E8ssvAz6CSPt6vSM8vY8P4ArCEgONewEAzq1YBXL5bO9unZpEWSOqsYD1
TX/pRYZLoEkVrrxJQRM=
=U1fi
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Single ufs driver fix quirking around another device spec violation"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-mediatek: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAP
missing wakeup IRQs.
-----BEGIN PGP SIGNATURE-----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=QFKr
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single fix for Qualcomm laptops that are affected by
missing wakeup IRQs"
* tag 'pinctrl-v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: x1e80100: Bypass PDC wakeup parent for now
This KUnit fixes update for Linux 6.11-rc67 consists of a fix to
missing function parameter warning found during documentation
build in linux-next.
-----BEGIN PGP SIGNATURE-----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=30Th
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
PullKUnit fix from Shuah Khan:
"Fix to a missing function parameter warning found during documentation
build in linux-next"
* tag 'linux_kselftest-kunit-fixes-6.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Fix missing kerneldoc comment
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmbbV3kUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vzzZg//TStL7op+bZCbMSB2SHtKJAuAWiXa
44g9Wi5ubCqwnWbx3H81NlNp2OsqmSh/niMRlVIRooDiS/J8JBT8SwSw9nopEhhb
U0xcpGlIQjZbue0Zp3nhOohYBl+P/SpZqCojkWCKhfVDgR4ft1HjlaORcxoX5Suk
cpR1iGqFH8kWk0X5Mo3GJCveNSIWGBJXX+IIENVJO3sc4n4wdpSIQRCq7whYQivA
G0tFIBYYY164rVhVslFvO4zwFM1RgbskFqOb6St3mPMYqn0NptM2FoOzefdILqo6
3qRkQnm1om6u+9qnyn7br+RYofaOFtzhIgulLJvjSHa7jxVubgNdOZtF3hls+e02
F6Cg89GgPrnkpt+kvLG097vsCoVxwS8wa31mYBvXy8HZ4RQ5/4LQ1j2Dlad51ZbL
fxOzRSyui//RoaexxvwrsvoQOEYYxUL5VxhonU3bLLEfYVU2I4apT+JtQO1iBiEC
83pnha0ELDPl/sBdV/kfNBp8OEUvMSbjzBes1sCecnvKtHAVTisS0FXXnyU25KPU
aZU+sn7915wfilNe7wQPwW8LUMt1kcgFDI9aD3eKS8m/cxENProAJPk2vNEM9UhO
iWEGLOABb7Bq+Y3etFg9Ds9WF+25oojYoTEwn+Vk2Xwyx83BCDIsyjyvFd0RbtS0
2QH/YCtEpCD7qiA=
=JNeL
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.11-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Unregister platform devices for child nodes when stopping a PCI
device, even if the PCI core has already cleared the OF_POPULATED bit
and of_platform_depopulate() doesn't do anything (Bartosz
Golaszewski)
- Rescan the bus from a separate thread so we don't deadlock when
triggering rescan from sysfs (Bartosz Golaszewski)
* tag 'pci-v6.11-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Rescan bus on a separate thread
PCI: Don't rely on of_platform_depopulate() for reused OF-nodes
-----BEGIN PGP SIGNATURE-----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=CntT
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix potential mount hang
- fix retry problem in two types of compound operations
- important netfs integration fix in SMB1 read paths
- fix potential uninitialized zero point of inode
- minor patch to improve debugging for potential crediting problems
* tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
netfs, cifs: Improve some debugging bits
cifs: Fix SMB1 readv/writev callback in the same way as SMB2/3
cifs: Fix zero_point init on inode initialisation
smb: client: fix double put of @cfile in smb2_set_path_size()
smb: client: fix double put of @cfile in smb2_rename_path()
smb: client: fix hang in wait_for_response() for negproto
clang warns on this because it has an unannotated fall-through between
cases:
arch/x86/kvm/x86.c:4819:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
and while we could annotate it as a fallthrough, the proper fix is to
just add the break for this case, instead of falling through to the
default case and the break there.
gcc also has that warning, but it looks like gcc only warns for the
cases where they fall through to "real code", rather than to just a
break. Odd.
Fixes: d30d9ee94c ("KVM: x86: Only advertise KVM_CAP_READONLY_MEM when supported by VM")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit a61ddb4393 ("drm: enable (most) W=1 warnings by default
across the subsystem"), most of the extra warnings in the driver
Makefile are redundant. Remove them.
Note that -Wmissing-declarations and -Wmissing-prototypes are always
enabled by default in scripts/Makefile.extrawarn.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That is clearly not something we should do upstream. The SDMA is
mandatory for the driver to work correctly.
We could do this for emulation and bringup, but in those cases the
engineer should probably enabled CPU based updates manually.
This reverts commit 62eefd10ac.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Indent the "break" statement one more tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Document how to use SMI system management interface to enable and
receive SVM events. Document SVM event triggers.
Define SVM events message string format macro that could be used by user
mode for sscanf to parse the event. Add it to uAPI header file to make
it obvious that is changing uAPI in future.
No functional changes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver mode-2 is only supported by relative new
smc firmware.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a queue is being destroyed but causes a HWS hang on removal, the KFD
may issue an unnecessary gpu reset if the destroyed queue can be fixed
by a queue reset.
This is because the queue has been removed from the KFD's queue list
prior to the preemption action on destroy so the reset call will fail to
match the HQD PQ reset information against the KFD's queue record to do
the actual reset.
To fix this, deactivate the queue prior to preemption since it's being
destroyed anyways and remove the queue from the KFD's queue list after
preemption.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enables users to update SVM's default granularity, used in
buffer migration and handling of recoverable page faults.
Param value is set in terms of log(numPages(buffer)),
e.g. 9 for a 2 MIB buffer
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the queue type before resetting the queue using mmio.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added a descriptor for the 'program_isharp_1dlut' parameter, which is a
flag used to determine whether to program the isharp 1D LUT.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:963: warning: Function parameter or struct member 'program_isharp_1dlut' not described in 'dpp401_dscl_program_isharp'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit replaces the use of amdgpu_job_submit_direct which submits
the job to the ring directly, with drm_sched_entity in the cleaner
shader job submission process. The change allows the GPU scheduler to
manage the cleaner shader job.
- The job is then submitted to the GPU using the
drm_sched_entity_push_job function, which allows the GPU scheduler to
manage the job.
This change improves the reliability of the cleaner shader job
submission process by leveraging the capabilities of the GPU scheduler.
Fixes: d361ad5d2f ("drm/amdgpu: Add sysfs interface for running cleaner shader")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a description for the 'ts' parameter in the
amdgpu_vm_handle_fault function's comment block.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2781: warning: Function parameter or struct member 'ts' not described in 'amdgpu_vm_handle_fault'
Cc: Xiaogang.Chen <Xiaogang.Chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408251419.vgZHg3GV-lkp@intel.com/
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable dpp rcg before we disable dppclk in hw_init cause system
hang/reboot
[How]
we remove dccg rcg related code from init into a separate function and
call it after we init pipe
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Function used to check the number of FEs connected to the current BE.
This was then used to determine if the symclk could be disabled, if
all FEs were disconnected. However, the function would skip over the
primary FE and return 0 when the primary FE was still connected. This
caused black screens on driver disable with an MST daisy chain hooked
up.
[How]
Refactor the function to correctly return the number of FEs connected
to the input BE. Also, rename it for clarity.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On VFs and SOCs with GC 9.4.4, VCN RRMT is disabled.
Only local register offsets should be used on JPEG v4.0.3 as they cannot
handle remote access to other AIDs. Since only local offsets are used,
the special write to MCM_ADDR register is no longer needed.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
